| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Exact meaning of the acronym is unknown, but we need this for Turing ACR.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
The NOUVEAU_GETPARAM_PCI_DEVICE case is missing a break statement and falls
through to the following NOUVEAU_GETPARAM_BUS_TYPE case and may end up
re-assigning the getparam->value to an undesired value. Fix this by adding
in the missing break.
Detected by CoverityScan, CID#1460507 ("Missing break in switch")
Fixes: 359088d5b8ec ("drm/nouveau: remove trivial cases of nvxx_device() usage")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warning:
drivers/gpu/drm/nouveau/nouveau_bo.c:1434:53: warning: this statement may fall through [-Wimplicit-fallthrough=]
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
This is much louder then we want. VCPI allocation failures are quite
normal, since they will happen if any part of the modesetting process is
interrupted by removing the DP MST topology in question. So just print a
debugging message on VCPI failures instead.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: f479c0ba4a17 ("drm/nouveau/kms/nv50: initial support for DP 1.2 multi-stream")
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Currently the uninitialized values in the array reply are printed out
when exec is false and nvkm_pmu_send has not updated the array. Avoid
confusion by only dumping out these values if they have been actually
updated.
Detected by CoverityScan, CID#1271291 ("Uninitialized scaler variable")
Fixes: ebb58dc2ef8c ("drm/nouveau/pmu: rename from pwr (no binary change)")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Currently, the expression for calculating RON is always going to result
in zero no matter the value of ram->mr[1] because the ! operator has
higher precedence than the shift >> operator. I believe the missing
parentheses around the expression before appying the ! operator will
result in the desired result.
[ Note, not tested ]
Detected by CoveritScan, CID#1324005 ("Operands don't affect result")
Fixes: c25bf7b6155c ("drm/nouveau/bios/ramcfg: Separate out RON pull value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Don't populate the array vsoff on the stack but instead make it
static. Makes the object code smaller by 67 bytes:
Before:
text data bss dec hex filename
5753 112 0 5865 16e9 .../nouveau/nvkm/subdev/bios/dp.o
After:
text data bss dec hex filename
5622 176 0 5798 16a6 .../nouveau/nvkm/subdev/bios/dp.o
(gcc version 8.2.0 x86_64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
GF117 appears to use the same register as GK104 (but still with the
general Fermi readout mechanism).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108980
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Backmerging for nouveau and imx that needed some fixes for next pulls.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
We need to backmerge drm-next to fix the komeda build failure.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
Atomic checks should never modify anything outside of the state that
they're passed in. Unfortunately this appears to be exactly what we're
doing in nv50_msto_atomic_check() where we update mstc->pbn every time
the function is called. This hasn't caused any bugs yet, but it needs to
be fixed in order to ensure that when committing an artificially
duplicated state (like during system resume), that we reuse the PBN of
that state to perform VCPI allocations and don't recalculate a different
value from the drm connector's reported bpc.
Also, move the VCPI slot allocations while we're at it as well. With
this, removing a topology in suspend while using nouveau no longer
causes the new atomic VCPI helpers to complain.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: eceae1472467 ("drm/dp_mst: Start tracking per-port VCPI allocations")
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190202002023.29665-5-lyude@redhat.com
|
|
Since we now have an easy way of refcounting drm_dp_mst_port structs and
safely accessing their contents, there isn't any good reason to keep
validating ports here. It doesn't prevent us from performing modesets on
branch devices that have been removed either, and we already disallow
enabling new displays on unregistered connectors in
update_connector_routing() in drm_atomic_check_modeset(). All it does is
cause us to have to make weird special exceptions in our atomic
modesetting code. So, get rid of it entirely.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: eceae1472467 ("drm/dp_mst: Start tracking per-port VCPI allocations")
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190202002023.29665-3-lyude@redhat.com
|
|
into drm-next
ttm:
- Replace ref/unref naming with get/put
amdgpu:
- Revert DC clang fix, causes a segfault with some compiler versions
- SR-IOV fix
- PCIE fix for vega20
- Misc DC fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190201062345.7304-1-alexander.deucher@amd.com
|
|
Both macros evaluate to 0. At the same time flag is already set to
zero since the struct is kzalloc'd in framebuffer_alloc().
As called by drm_fb_helper_alloc_fbi() in the DRM drivers.
v2: Rebase and improve commit message per Emil's suggestion.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-tegra@vger.kernel.org
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190124165831.16427-27-daniel.vetter@ffwll.ch
|
|
The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The function ttm_bo_get acquires a reference on a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Having the probe helper stuff (which pretty much everyone needs) in
the drm_crtc_helper.h file (which atomic drivers should never need) is
confusing. Split them out.
To make sure I actually achieved the goal here I went through all
drivers. And indeed, all atomic drivers are now free of
drm_crtc_helper.h includes.
v2: Make it compile. There was so much compile fail on arm drivers
that I figured I'll better not include any of the acks on v1.
v3: Massive rebase because i915 has lost a lot of drmP.h includes, but
not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h
there was still one, which this patch largely removes. Which means
rolling out lots more includes all over.
This will also conflict with ongoing drmP.h cleanup by others I
expect.
v3: Rebase on top of atomic bochs.
v4: Review from Laurent for bridge/rcar/omap/shmob/core bits:
- (re)move some of the added includes, use the better include files in
other places (all suggested from Laurent adopted unchanged).
- sort alphabetically
v5: Actually try to sort them, and while at it, sort all the ones I
touch.
v6: Rebase onto i915 changes.
v7: Rebase once more.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: virtualization@lists.linux-foundation.org
Cc: etnaviv@lists.freedesktop.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-tegra@vger.kernel.org
Cc: xen-devel@lists.xen.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
|
|
nouveau support for TU102 (RTX 2080 Ti)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CABDvA=mQsRr0BpRpv3n6UjthHush4u_kQR3oUGHkBtAHTmyCYw@mail.gmail.com
|
|
Would usually do this split-out, verifying each component indivitually, but
this has been squashed together to be more palatable for merging in 5.0-rc.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
It's not a core function, and the matching atomic functions are also
not in the core. Plus the suspend/resume helper is also already there.
Needs a tiny bit of open-coding, but less midlayer beats that I think.
v2: Rebase onto ast (which gained a new user).
Cc: Sam Bobroff <sbobroff@linux.ibm.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: Rex Zhu <Rex.Zhu@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Shaoyun Liu <Shaoyun.Liu@amd.com>
Cc: Monk Liu <Monk.Liu@amd.com>
Cc: nouveau@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181217194303.14397-4-daniel.vetter@ffwll.ch
|
|
drm-next has been forwarded to 5.0-rc1, and we need it to apply the damage
helper for dirtyfb series from Noralf Trønnes.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
The correct way for legacy drivers to update properties that need to
do a full modeset, is to do a full modeset.
Note that we don't need to call the drm_mode_config_internal helper
because we're not changing any of the refcounted paramters.
v2: Fixup error handling (Ville). Since the old code didn't bother
I decided to just delete it instead of adding even more code for just
error handling.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181217194303.14397-2-daniel.vetter@ffwll.ch
|
|
3 nouveau fixes:
one backlight, falcon register access, and a fan fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv4MHr=Rq3FkZFTYWPc7o5-dTWFysXB=wN2L91SYeFbzkQ@mail.gmail.com
|
|
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108980
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
When a fan is controlled via linear fallback without cstate, we
shouldn't stop polling. Otherwise it won't be adjusted again and
keeps running at an initial crazy pace.
Fixes: 800efb4c2857 ("drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios")
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1103356
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107447
Reported-by: Thomas Blume <thomas.blume@suse.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Currently, nouveau uses the yolo method of setting up MST displays: it
uses the old VCPI helpers (drm_dp_find_vcpi_slots()) for computing the
display configuration. These helpers don't take care to make sure they
take a reference to the mstb port that they're checking, and
additionally don't actually check whether or not the topology still has
enough bandwidth to provide the VCPI tokens required.
So, drop usage of the old helpers and move entirely over to the atomic
helpers.
Changes since v6:
* Cleanup atomic check logic and remove a bunch of unneeded checks -
danvet
Changes since v5:
* Update nv50_msto_atomic_check() and nv50_mstc_atomic_check() to the
new requirements for drm_dp_atomic_find_vcpi_slots() and
drm_dp_atomic_release_vcpi_slots()
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-21-lyude@redhat.com
|
|
Going through the currently programmed payloads isn't safe without
holding mgr->payload_lock, so actually do that and warn if anyone tries
calling nv50_msto_payload() in the future without grabbing the right
locks.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-17-lyude@redhat.com
|
|
Same as we did for i915, but for nouveau this time. Additionally, we
grab a malloc reference to the port that lasts for the entire lifetime
of nv50_mstc, which gives us the guarantee that mstc->port will always
point to valid memory for as long as the mstc stays around.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-16-lyude@redhat.com
|
|
Now that we finally have a sane way to keep port allocations around, use
it to fix the potential unchecked ->port accesses that nouveau makes by
making sure we keep the mst port allocated for as long as it's
drm_connector is accessible.
Additionally, now that we've guaranteed that mstc->port is allocated for
as long as we keep mstc around we can remove the connector registration
checks for codepaths which release payloads, allowing us to release
payloads on active topologies properly. These registration checks were
only required before in order to avoid situations where mstc->port could
technically be pointing at freed memory.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-15-lyude@redhat.com
|
|
There is no need to look at the port's VCPI allocation before calling
drm_dp_mst_deallocate_vcpi(), as we already have msto->disabled to let
us avoid cleaning up an msto more then once. The DP MST core will never
call drm_dp_mst_deallocate_vcpi() on it's own, which is presumably what
these checks are meant to protect against.
More importantly though, we're about to stop clearing mstc->port in the
next commit, which means if we could potentially hit a use-after-free
error if we tried to check mstc->port->vcpi here. So to make life easier
for anyone who bisects this code in the future, use msto->disabled
instead to check whether or not we need to deallocate VCPI instead.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-14-lyude@redhat.com
|
|
Trying to destroy the connector using mstc->connector.funcs->destroy()
if connector initialization fails is wrong: there is no possible
codepath in nv50_mstc_new where nv50_mstm_add_connector() would return
<0 and mstc would be non-NULL.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-13-lyude@redhat.com
|
|
Make life easier for drivers by simply passing the connector
to drm_hdmi_avi_infoframe_from_display_mode() and
drm_hdmi_avi_infoframe_quant_range(). That way drivers don't
need to worry about is_hdmi2_sink mess.
v2: Make is_hdmi2_sink() return true for sil-sii8620
Adapt to omap/vc4 changes
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108172828.15184-1-ville.syrjala@linux.intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.1:
UAPI Changes:
Cross-subsystem Changes:
- Turn dma-buf fence sequence numbers into 64 bit numbers
Core Changes:
- Move to a common helper for the DP MST hotplug for radeon, i915 and
amdgpu
- i2c improvements for drm_dp_mst
- Removal of drm_syncobj_cb
- Introduction of an helper to create and attach the TV margin properties
Driver Changes:
- Improve cache flushes for v3d
- Reflection support for vc4
- HDMI overscan support for vc4
- Add implicit fencing support for rockchip and sun4i
- Switch to generic fbdev emulation for virtio
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: applied amdgpu merge fixup]
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190107180333.amklwycudbsub3s5@flea
|
|
Pull fbdev updates from Bartlomiej Zolnierkiewicz:
"This time the pull request is really small.
The most notable changes are fixing fbcon to not cause crash on
unregister_framebuffer() operation when there is more than one
framebuffer, adding config option to center the bootup logo and making
FB_BACKLIGHT config option tristate (which in turn uncovered incorrect
FB_BACKLIGHT usage by DRM's nouveau driver).
Summary:
- fix fbcon to not cause crash on unregister_framebuffer() when there
is more than one framebuffer (Noralf Trønnes)
- improve support for small rotated displays (Peter Rosin)
- fix probe failure handling in udlfb driver (Dan Carpenter)
- add config option to center the bootup logo (Peter Rosin)
- make FB_BACKLIGHT config option tristate (Rob Clark)
- remove superfluous HAS_DMA dependency for goldfishfb driver (Geert
Uytterhoeven)
- misc fixes (Alexey Khoroshilov, YueHaibing, Colin Ian King, Lubomir
Rintel)
- misc cleanups (Yangtao Li, Wen Yang)
also there is DRM's nouveau driver fix for wrong FB_BACKLIGHT config
option usage (FB_BACKLIGHT is for internal fbdev subsystem use only)"
* tag 'fbdev-v4.21' of git://github.com/bzolnier/linux:
drm/nouveau: fix incorrect FB_BACKLIGHT usage in Kconfig
fbdev: fbcon: Fix unregister crash when more than one framebuffer
fbdev: Remove depends on HAS_DMA in case of platform dependency
pxa168fb: trivial typo fix
fbdev: fsl-diu: remove redundant null check on cmap
fbdev: omap2: omapfb: convert to DEFINE_SHOW_ATTRIBUTE
fbdev: uvesafb: fix spelling mistake "memoery" -> "memory"
fbdev: fbmem: add config option to center the bootup logo
fbdev: fbmem: make fb_show_logo_line return the end instead of the height
video: fbdev: pxafb: Fix "WARNING: invalid free of devm_ allocated data"
fbdev: fbmem: behave better with small rotated displays and many CPUs
video: clps711x-fb: release disp device node in probe()
fbdev: make FB_BACKLIGHT a tristate
udlfb: fix some inconsistent NULL checking
|
|
Making FB_BACKLIGHT tristate by commit b4a1ed0cd18b ("fbdev:
make FB_BACKLIGHT a tristate") caused unmet dependencies in
some configurations:
WARNING: unmet direct dependencies detected for FB_BACKLIGHT
Depends on [m]: HAS_IOMEM [=y] && FB [=m]
Selected by [y]:
- DRM_NOUVEAU [=y] && HAS_IOMEM [=y] && DRM [=y] && PCI [=y] && MMU [=y] && DRM_NOUVEAU_BACKLIGHT [=y]
Selected by [m]:
- FB_NVIDIA [=m] && HAS_IOMEM [=y] && FB [=m] && PCI [=y] && FB_NVIDIA_BACKLIGHT [=y]
Fix it by making DRM_NOUVEAU select BACKLIGHT_CLASS_DEVICE and
BACKLIGHT_LCD_SUPPORT instead of FB_BACKLIGHT.
Fixes: b4a1ed0cd18b ("fbdev: make FB_BACKLIGHT a tristate")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Cc: Rob Clark <robdclark@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
|
|
Pull drm updates from Dave Airlie:
"Core:
- shared fencing staging removal
- drop transactional atomic helpers and move helpers to new location
- DP/MST atomic cleanup
- Leasing cleanups and drop EXPORT_SYMBOL
- Convert drivers to atomic helpers and generic fbdev.
- removed deprecated obj_ref/unref in favour of get/put
- Improve dumb callback documentation
- MODESET_LOCK_BEGIN/END helpers
panels:
- CDTech panels, Banana Pi Panel, DLC1010GIG,
- Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA,
- Himax HX8357D, simulated RTSM AEMv8.
- GPD Win2 panel
- AUO G101EVN010
vgem:
- render node support
ttm:
- move global init out of drivers
- fix LRU handling for ghost objects
- Support for simultaneous submissions to multiple engines
scheduler:
- timeout/fault handling changes to help GPU recovery
- helpers for hw with preemption support
i915:
- Scaler/Watermark fixes
- DP MST + powerwell fixes
- PSR fixes
- Break long get/put shmemfs pages
- Icelake fixes
- Icelake DSI video mode enablement
- Engine workaround improvements
amdgpu:
- freesync support
- GPU reset enabled on CI, VI, SOC15 dGPUs
- ABM support in DC
- KFD support for vega12/polaris12
- SDMA paging queue on vega
- More amdkfd code sharing
- DCC scanout on GFX9
- DC kerneldoc
- Updated SMU firmware for GFX8 chips
- XGMI PSP + hive reset support
- GPU reset
- DC trace support
- Powerplay updates for newer Polaris
- Cursor plane update fast path
- kfd dma-buf support
virtio-gpu:
- add EDID support
vmwgfx:
- pageflip with damage support
nouveau:
- Initial Turing TU104/TU106 modesetting support
msm:
- a2xx gpu support for apq8060 and imx5
- a2xx gpummu support
- mdp4 display support for apq8060
- DPU fixes and cleanups
- enhanced profiling support
- debug object naming interface
- get_iova/page pinning decoupling
tegra:
- Tegra194 host1x, VIC and display support enabled
- Audio over HDMI for Tegra186 and Tegra194
exynos:
- DMA/IOMMU refactoring
- plane alpha + blend mode support
- Color format fixes for mixer driver
rcar-du:
- R8A7744 and R8A77470 support
- R8A77965 LVDS support
imx:
- fbdev emulation fix
- multi-tiled scalling fixes
- SPDX identifiers
rockchip
- dw_hdmi support
- dw-mipi-dsi + dual dsi support
- mailbox read size fix
qxl:
- fix cursor pinning
vc4:
- YUV support (scaling + cursor)
v3d:
- enable TFU (Texture Formatting Unit)
mali-dp:
- add support for linear tiled formats
sun4i:
- Display Engine 3 support
- H6 DE3 mixer 0 support
- H6 display engine support
- dw-hdmi support
- H6 HDMI phy support
- implicit fence waiting
- BGRX8888 support
meson:
- Overlay plane support
- implicit fence waiting
- HDMI 1.4 4k modes
bridge:
- i2c fixes for sii902x"
* tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drm: (1403 commits)
drm/amd/display: Add fast path for cursor plane updates
drm/amdgpu: Enable GPU recovery by default for CI
drm/amd/display: Fix duplicating scaling/underscan connector state
drm/amd/display: Fix unintialized max_bpc state values
Revert "drm/amd/display: Set RMX_ASPECT as default"
drm/amdgpu: Fix stub function name
drm/msm/dpu: Fix clock issue after bind failure
drm/msm/dpu: Clean up dpu_media_info.h static inline functions
drm/msm/dpu: Further cleanups for static inline functions
drm/msm/dpu: Cleanup the debugfs functions
drm/msm/dpu: Remove dpu_irq and unused functions
drm/msm: Make irq_postinstall optional
drm/msm/dpu: Cleanup callers of dpu_hw_blk_init
drm/msm/dpu: Remove unused functions
drm/msm/dpu: Remove dpu_crtc_is_enabled()
drm/msm/dpu: Remove dpu_crtc_get_mixer_height
drm/msm/dpu: Remove dpu_dbg
drm/msm: dpu: Remove crtc_lock
drm/msm: dpu: Remove vblank_requested flag from dpu_crtc
drm/msm: dpu: Separate crtc assignment from vblank enable
...
|
|
Three fixes:
tegra regression fix
display flushing fix
mst cleanup fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv7WCPzjQZonk+eS1FgEUKirz-4LOrVpMUVMM=D-GjbVpg@mail.gmail.com
|
|
Noticed this while working on redoing the reference counting scheme in
the DP MST helpers. Nouveau doesn't attempt to call
drm_dp_mst_topology_mgr_destroy() at all, which leaves it leaking all of
the resources for drm_dp_mst_topology_mgr and it's children mstbs+ports.
Fixes: f479c0ba4a17 ("drm/nouveau/kms/nv50: initial support for DP 1.2 multi-stream")
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Should hopefully fix a regression some people have been seeing since EVO
push buffers were moved to VRAM by default on Pascal GPUs.
Fixes: d00ddd9da ("drm/nouveau/kms/nv50-: allocate push buffers in vidmem on pascal")
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: <stable@vger.kernel.org> # 4.19+
|
|
Appears to be compatible with TU104.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Appears to be compatible with TU104.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
