summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/msm
AgeCommit message (Collapse)AuthorFilesLines
2022-03-28Merge tag 'driver-core-5.18-rc1' of ↵Linus Torvalds1-12/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of driver core changes for 5.18-rc1. Not much here, primarily it was a bunch of cleanups and small updates: - kobj_type cleanups for default_groups - documentation updates - firmware loader minor changes - component common helper added and take advantage of it in many drivers (the largest part of this pull request). All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits) Documentation: update stable review cycle documentation drivers/base/dd.c : Remove the initial value of the global variable Documentation: update stable tree link Documentation: add link to stable release candidate tree devres: fix typos in comments Documentation: add note block surrounding security patch note samples/kobject: Use sysfs_emit instead of sprintf base: soc: Make soc_device_match() simpler and easier to read driver core: dd: fix return value of __setup handler driver core: Refactor sysfs and drv/bus remove hooks driver core: Refactor multiple copies of device cleanup scripts: get_abi.pl: Fix typo in help message kernfs: fix typos in comments kernfs: remove unneeded #if 0 guard ALSA: hda/realtek: Make use of the helper component_compare_dev_name video: omapfb: dss: Make use of the helper component_compare_dev power: supply: ab8500: Make use of the helper component_compare_dev ASoC: codecs: wcd938x: Make use of the helper component_compare/release_of iommu/mediatek: Make use of the helper component_compare/release_of drm: of: Make use of the helper component_release_of ...
2022-03-10Merge tag 'drm-msm-next-2022-03-08' of ↵Dave Airlie37-1139/+1120
https://gitlab.freedesktop.org/drm/msm into drm-next Follow-up pull req for v5.18 to pull in some important fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvwHFHEd+9df-0aBOCfmw+ULvTS3f18sJuq_cvGKLDSjw@mail.gmail.com
2022-03-08drm/msm/gpu: Fix crash on devices without devfreq support (v2)Rob Clark1-5/+25
Avoid going down devfreq paths on devices where devfreq is not initialized. v2: Change has_devfreq() logic [Dmitry] Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Reported-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Fixes: 6aa89ae1fb04 ("drm/msm/gpu: Cancel idle/boost work on suspend") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220308184844.1121029-1-robdclark@gmail.com
2022-03-08drm/msm/adreno: fix cast in adreno_get_param()Dan Carpenter1-4/+4
These casts need to happen before the shift. The only time it would matter would be if "rev.core" is >= 128. In that case the sign bit would be extended and we do not want that. Fixes: afab9d91d872 ("drm/msm/adreno: Expose speedbin to userspace") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Link: https://lore.kernel.org/r/20220307133105.GA17534@kili Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-03-06drm/msm: Fix dirtyfb refcountingRob Clark1-1/+3
refcount_t complains about 0->1 transitions, which isn't *quite* what we wanted. So use dirtyfb==1 to mean that the fb is not connected to any output that requires dirtyfb flushing, so that we can keep the underflow and overflow checking. Fixes: 9e4dde28e9cd ("drm/msm: Avoid dirtyfb stalls on video mode displays (v2)") Signed-off-by: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20220304202146.845566-1-robdclark@gmail.com
2022-03-05drm/msm/a6xx: Fix missing ARRAY_SIZE() checkRob Clark1-4/+8
Fixes: f6d62d091cfd ("drm/msm/a6xx: add support for Adreno 660 GPU") Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220305173405.914989-1-robdclark@gmail.com
2022-03-04drm/msm: Add MSM_SUBMIT_FENCE_SN_INRob Clark2-7/+38
Add a way for userspace to specify the sequence number fence used to track completion of the submit. As the seqno fence is simply an incrementing counter which is local to the submitqueue, it is easy for userspace to know the next value. This is useful for native userspace drivers in a vm guest, as the guest to host roundtrip can have high latency. Assigning the fence seqno in the guest userspace allows the guest to continue without waiting for response from the host. Signed-off-by: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20220224222321.60653-1-robdclark@gmail.com
2022-03-04drm/msm/a6xx: Zap counters across context switchRob Clark1-0/+29
Any app controlled perfcntr collection (GL_AMD_performance_monitor, etc) does not require counters to maintain state across context switches. So clear them if systemwide profiling is not active. Signed-off-by: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20220304005317.776110-5-robdclark@gmail.com
2022-03-04drm/msm: Add SYSPROF param (v2)Rob Clark5-0/+80
Add a SYSPROF param for system profiling tools like Mesa's pps-producer (perfetto) to control behavior related to system-wide performance counter collection. In particular, for profiling, one wants to ensure that GPU context switches do not effect perfcounter state, and might want to suppress suspend (which would cause counters to lose state). v2: Swap the order in msm_file_private_set_sysprof() [sboyd] and initialize the sysprof_active refcount to one (because the under/ overflow checking in refcount_t doesn't expect a 0->1 transition) meaning that values greater than 1 means sysprof is active. Signed-off-by: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20220304005317.776110-4-robdclark@gmail.com
2022-03-04drm/msm: Add SET_PARAM ioctlRob Clark9-0/+39
It was always expected to have a use for this some day, so we left a placeholder. Now we do. (And I expect another use in the not too distant future when we start allowing userspace to allocate GPU iova.) Signed-off-by: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20220304005317.776110-3-robdclark@gmail.com
2022-03-04drm/msm: Update generated headersRob Clark23-1118/+894
Update headers from mesa commit: commit 7e63fa2bb13cf14b765ad06d046789ee1879b5ef Author: Rob Clark <robclark@freedesktop.org> AuthorDate: Wed Mar 2 17:11:10 2022 -0800 freedreno/registers: Add a couple regs we need for kernel Signed-off-by: Rob Clark <robdclark@chromium.org> Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15221> Signed-off-by: Rob Clark <robdclark@chromium.org> [for display bits:] Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://lore.kernel.org/r/20220304005317.776110-2-robdclark@gmail.com
2022-03-04Merge tag 'drm-msm-next-2022-03-01' of ↵Dave Airlie77-988/+1572
https://gitlab.freedesktop.org/drm/msm into drm-next We're experimenting a bit with the process this time, with Dmitry collecting display patches and merging them into msm-next with me handling the gpu/etc side of things. Summary of interesting new bits and pieces * dpu + dp support for sc8180x * dp support for sm8350 * dpu + dsi support for qcm2290 * 10nm dsi phy tuning support * bridge support for dp encoder * gpu support for additional 7c3 SKUs * assorted cleanups and fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGu=Jdrw6DqYOYPTMks7=zatrsvdR=o6DpjqZ=TQQhFZuw@mail.gmail.com
2022-03-04Merge tag 'drm-misc-next-2022-03-03' of ↵Dave Airlie1-8/+8
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.18: UAPI Changes: Cross-subsystem Changes: - Improve performance of some fbdev ops, in some cases up to 6x faster. Core Changes: - Some small DP fixes. - Find panels in subnodes of OF devices, and add of_get_drm_panel_display_mode to retrieve mode. - Add drm_object_property_get_default_value and use it for resetting zpos in plane state reset, removing the need for individual drivers to do it. - Same for color encoding and color range props. - Update panic handling todo doc. - Add todo that format conversion helpers should be sped up similarly to fbdev ops. Driver Changes: - Add panel orientation property to simpledrm for quirked panels. - Assorted small fixes to tiny/repaper, nouveau, stm, omap, ssd130x. - Add crc support to stm/ltdc. - Add MIPI DBI compatible SPI driver - Assorted small fixes to tiny panels and bridge drivers. - Add AST2600 support to aspeed. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/48fabd78-ade9-f80b-c724-13726c7be69e@linux.intel.com
2022-02-28Merge 5.17-rc6 into driver-core-nextGreg Kroah-Hartman10-11/+70
We need the driver core fix in here as well for future changes. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-25drm/msm/adreno: Expose speedbin to userspaceAkhil P Oommen3-6/+21
Expose speedbin through MSM_PARAM_CHIP_ID parameter to help userspace identify the sku. Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Link: https://lore.kernel.org/r/20220226005021.v2.4.I86c32730e08cba9e5c83f02ec17885124d45fa56@changeid Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-02-25drm/msm/a6xx: Add support for 7c3 SKUsAkhil P Oommen1-0/+15
Add support for 7c3 SKU detection using speedbin fuse. Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Link: https://lore.kernel.org/r/20220226005021.v2.3.I6e89c014eb17f090f716fba662bdd33073920804@changeid Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-02-25drm/msm/adreno: Generate name from chipid for 7c3Akhil P Oommen2-3/+13
Use a gpu name which is sprintf'ed from the chipid for 7c3 gpu instead of hardcoding one. This helps to avoid code churn in case of a gpu rename. Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Link: https://lore.kernel.org/r/20220226005021.v2.2.I9436e0e300f76b2e6c34136a0b902e8cfd73e0d6@changeid Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-02-25drm/msm: Use generic name for gpu resourcesAkhil P Oommen1-2/+2
Use generic name for resources like irq and kthread instead of hardware specific name to make it easier to grep. Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Link: https://lore.kernel.org/r/20220226005021.v2.1.Id3d2e7391192c86d0783aeb307d3f9fb61f9efee@changeid Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-02-25drm/msm/mdp5: Remove redundant zpos initialisationMaxime Ripard1-8/+8
The mdp KMS driver will call drm_plane_create_zpos_property() with an init value depending on the plane purpose. Since the initial value wasn't carried over in the state, the driver had to set it again in mdp5_plane_reset(). However, the helpers have been adjusted to set it properly at reset, so this is not needed anymore. Cc: freedreno@lists.freedesktop.org Cc: linux-arm-msm@vger.kernel.org Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-13-maxime@cerno.tech
2022-02-25drm/msm: Avoid dirtyfb stalls on video mode displays (v2)Rob Clark10-33/+110
Someone on IRC once asked an innocent enough sounding question: Why with xf86-video-modesetting is es2gears limited at 120fps. So I broke out the perfetto tracing mesa MR and took a look. It turns out the problem was drm_atomic_helper_dirtyfb(), which would end up waiting for vblank.. es2gears would rapidly push two frames to Xorg, which would blit them to screen and in idle hook (I assume) call the DIRTYFB ioctl. Which in turn would do an atomic update to flush the dirty rects, which would stall until the next vblank. And then the whole process would repeat. But this is a bit silly, we only need dirtyfb for command mode DSI panels. So track in plane state whether dirtyfb is required, and track in the fb how many attached planes require dirtyfb so that we can skip it when not required. (Note, mdp4 does not actually have cmd mode support.) Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220223191118.881321-1-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-02-25drm/msm: Make use of the helper component_compare_ofYong Wu1-12/+3
Use the common compare helper from component. Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Yong Wu <yong.wu@mediatek.com> Link: https://lore.kernel.org/r/20220214060819.7334-10-yong.wu@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-25Merge tag 'drm-misc-next-2022-02-23' of ↵Dave Airlie2-1/+4
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.18: UAPI Changes: Cross-subsystem Changes: - Split out panel-lvds and lvds dt bindings . - Put yes/no on/off disabled/enabled strings in linux/string_helpers.h and use it in drivers and tomoyo. - Clarify dma_fence_chain and dma_fence_array should never include eachother. - Flatten chains in syncobj's. - Don't double add in fbdev/defio when page is already enlisted. - Don't sort deferred-I/O pages by default in fbdev. Core Changes: - Fix missing pm_runtime_put_sync in bridge. - Set modifier support to only linear fb modifier if drivers don't advertise support. - As a result, we remove allow_fb_modifiers. - Add missing clear for EDID Deep Color Modes in drm_reset_display_info. - Assorted documentation updates. - Warn once in drm_clflush if there is no arch support. - Add missing select for dp helper in drm_panel_edp. - Assorted small fixes. - Improve fb-helper's clipping handling. - Don't dump shmem mmaps in a core dump. - Add accounting to ttm resource manager, and use it in amdgpu. - Allow querying the detected eDP panel through debugfs. - Add helpers for xrgb8888 to 8 and 1 bits gray. - Improve drm's buddy allocator. - Add selftests for the buddy allocator. Driver Changes: - Add support for nomodeset to a lot of drm drivers. - Use drm_module_*_driver in a lot of drm drivers. - Assorted small fixes to bridge/lt9611, v3d, vc4, vmwgfx, mxsfb, nouveau, bridge/dw-hdmi, panfrost, lima, ingenic, sprd, bridge/anx7625, ti-sn65dsi86. - Add bridge/it6505. - Create DP and DVI-I connectors in ast. - Assorted nouveau backlight fixes. - Rework amdgpu reset handling. - Add dt bindings for ingenic,jz4780-dw-hdmi. - Support reading edid through aux channel in ingenic. - Add a drm driver for Solomon SSD130x OLED displays. - Add simple support for sharp LQ140M1JW46. - Add more panels to nt35560. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/686ec871-e77f-c230-22e5-9e3bb80f064a@linux.intel.com
2022-02-23Merge branches 'msm-next-lumag-dpu' and 'msm-next-lumag-dsi' into msm-next-lumagDmitry Baryshkov47-462/+658
2022-02-23drm/msm/dpu: wire up MSM8998's DSPP blocksDmitry Baryshkov1-0/+2
The commit adding msm8998 support didn't added msm8998's DSPP blocks configuration, but did not use them in msm8998_cfg_init(). Wire them up to be used for display post processing. Reported-by: kernel test robot <lkp@intel.com> Fixes: 94391a14fc27 ("drm/msm/dpu1: Add MSM8998 to hw catalog") Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Cc: Jami Kettunen <jami.kettunen@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/475544/ Link: https://lore.kernel.org/r/20220222031948.228727-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-23drm/sched: Add device pointer to drm_gpu_schedulerJiawei Gu1-1/+1
Add device pointer so scheduler's printing can use DRM_DEV_ERROR() instead, which makes life easier under multiple GPU scenario. v2: amend all calls of drm_sched_init() v3: fill dev pointer for all drm_sched_init() calls Signed-off-by: Jiawei Gu <Jiawei.Gu@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220221095705.5290-1-Jiawei.Gu@amd.com
2022-02-23drm/msm: add support for QCM2290 MDSSLoic Poulain4-0/+151
Add compatibility for QCM2290 display subsystem, including required entries in DPU hw catalog. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/474087/ Link: https://lore.kernel.org/r/1644852547-10067-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-23drm/msm/dsi: Add support for qcm2290 dsi controllerLoic Poulain3-0/+28
QCM2290 MDSS includes a Qualcomm DSI controller v2.4.1. Since this controller version is not SoC specific, and already assigned to sc7180 for auto configuration, we rely on DSI block specific compatible string "qcom,dsi-ctrl-6g-qcm2290", and use the device's data to point to the right dsi config handler. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/474088/ Link: https://lore.kernel.org/r/1644853060-12222-2-git-send-email-loic.poulain@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-23drm/msm/dsi: Allow to specify dsi config as pdataLoic Poulain2-1/+5
Config autodetect based on DSI controller version is quite limited since several qcom SoCs can integrate a DSI controller with the same version, but with different config (io_offset, supplies, etc). This change allows to specify dsi config via device data pointer. config autodetect is still used in case data pointer is NULL. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/474089/ Link: https://lore.kernel.org/r/1644853060-12222-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-20drm/msm/gpu: Track global faults per address-spaceRob Clark4-3/+15
Other processes don't need to know about faults that they are isolated from by virtue of address space isolation. They are only interested in whether some of their state might have been corrupted. But to be safe, also track unattributed faults. This case should really never happen unless there is a kernel bug (and that would never happen, right?) v2: Instead of adding a new param, just change the behavior of the existing param to match what userspace actually wants [anholt] Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5934 Signed-off-by: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20220201161618.778455-3-robdclark@gmail.com Reviewed-by: Emma Anholt <emma@anholt.net> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-02-20drm/msm/gpu: Add ctx to get_param()Rob Clark5-6/+12
Prep work for next patch. Signed-off-by: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20220201161618.778455-2-robdclark@gmail.com Reviewed-by: Emma Anholt <emma@anholt.net> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-02-19Merge branches 'msm-next-lumag-core', 'msm-next-lumag-dpu', ↵Dmitry Baryshkov48-696/+1021
'msm-next-lumag-dp', 'msm-next-lumag-dsi', 'msm-next-lumag-hdmi' and 'msm-next-lumag-mdp5' into msm-next-lumag
2022-02-19drm/msm/dp: support finding next bridge even for DP interfacesDmitry Baryshkov1-7/+12
It is possible to supply display-connector (bridge) to the DP interface, add support for parsing it too. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20220211224006.1797846-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-19drm/msm/dp: support attaching bridges to the DP encoderDmitry Baryshkov5-20/+21
Currently DP driver will allocate panel bridge for eDP panels. This supports only the following topology: - eDP encoder ⇒ eDP panel (wrapped using panel-bridge) Simplify this code to just check if there is any next bridge in the chain (be it a panel bridge or regular bridge). Rename panel_bridge field to next_bridge accordingly. This allows one to use e.g. one of the following display topologies: - eDP encoder ⇒ ptn3460 ⇒ fixed LVDS panel - eDP encoder ⇒ ptn3460 ⇒ LVDS connector with EDID lines for panel autodetect - eDP encoder ⇒ ptn3460 ⇒ THC63LVD1024 ⇒ DPI panel. - eDP encoder ⇒ LT8912 ⇒ DSI panel Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20220211224006.1797846-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-19drm/msm/dp: fix panel bridge attachmentDmitry Baryshkov1-10/+11
In commit 8a3b4c17f863 ("drm/msm/dp: employ bridge mechanism for display enable and disable") the DP driver received a drm_bridge instance, which is always attached to the encoder as a root bridge. However it conflicts with the panel_bridge support for eDP panels. The panel bridge attaches to the encoder before the "dp" bridge (DP driver's drm_bridge instance created in msm_dp_bridge_init()) has a chance to do so. Change panel bridge attachment to come after the "dp" bridge attachment (and to use it as a previous bridge). Fixes: 8a3b4c17f863 ("drm/msm/dp: employ bridge mechanism for display enable and disable") Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20220211224006.1797846-2-dmitry.baryshkov@linaro.org [db: fixed commit message according to Stephen's suggestions] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-18drm/msm/dpu: Fix timeout issues on command mode panelsAngeloGioacchino Del Regno1-0/+3
In function dpu_encoder_phys_cmd_wait_for_commit_done we are always checking if the relative CTL is started by waiting for an interrupt to fire: it is fine to do that, but then sometimes we call this function while the CTL is up and has never been put down, but that interrupt gets raised only when the CTL gets a state change from 0 to 1 (disabled to enabled), so we're going to wait for something that will never happen on its own. Solving this while avoiding to restart the CTL is actually possible and can be done by just checking if it is already up and running when the wait_for_commit_done function is called: in this case, so, if the CTL was already running, we can say that the commit is done if the command transmission is complete (in other terms, if the interface has been flushed). Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210911163919.47173-2-angelogioacchino.delregno@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-18drm/msm/dpu: Add a function to retrieve the current CTL statusAngeloGioacchino Del Regno2-0/+13
Add a function that returns whether the requested CTL is active or not: this will be used in a later commit to fix command mode panel issues. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210911163919.47173-1-angelogioacchino.delregno@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-18drm/msm/dpu: simplify clocks handlingDmitry Baryshkov9-150/+36
DPU driver contains code to parse clock items from device tree into special data struct and then enable/disable/set rate for the clocks using that data struct. However the DPU driver itself uses only parsing and enabling/disabling part (the rate setting is used by DP driver). Move this implementation to the DP driver (which actually uses rate setting) and replace hand-coded enable/disable/get loops in the DPU with the respective clk_bulk operations. Put operation is removed completely because, it is handled using devres instead. DP implementation is unchanged for now. Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # RB3 (sdm845) and RB5 (qrb5165) Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220217055529.499829-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-18drm/msm/dpu: pull connector from dpu_encoder_phys to dpu_encoder_virtDmitry Baryshkov2-7/+6
All physical encoders used by virtual encoder share the same connector, so pull the connector field from dpu_encoder_phys into dpu_encoder_virt structure. Otherwise code suggests that different phys_encs can have different connectors. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220217035358.465904-8-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-18drm/msm/dpu: switch dpu_encoder to use atomic_mode_setDmitry Baryshkov4-56/+21
Make dpu_encoder use atomic_mode_set to receive connector and CRTC states as arguments rather than finding connector and CRTC by manually looping through the respective lists. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220217035358.465904-7-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-18drm/msm/dpu: encoder: drop unused mode_fixup callbackDmitry Baryshkov4-32/+0
Both cmd and vid backends provide useless mode_fixup() callback. Drop it. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220217035358.465904-6-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-18drm/msm/dpu: drop bus_scaling_client fieldDmitry Baryshkov1-2/+0
We do not use MSM bus client, so drop bus_scaling_client field from dpu_encoder_virt. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220217035358.465904-5-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-18drm/msm/dpu: remove msm_dp cached in dpu_encoder_virtDmitry Baryshkov1-5/+0
Stop caching msm_dp instance in dpu_encoder_virt since it's not used now. Fixes: 8a3b4c17f863 ("drm/msm/dp: employ bridge mechanism for display enable and disable") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220217035358.465904-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-18drm/msm: move struct msm_display_info to dpu driverDmitry Baryshkov2-18/+18
The msm_display_info structure is not used by the rest of msm driver, so move it into the dpu1 (dpu_encoder.h to be precise). Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220217035358.465904-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-18drm/msm/dpu: fix dp audio conditionDmitry Baryshkov1-1/+1
DP audio enablement code which is comparing intf_type, DRM_MODE_ENCODER_TMDS (= 2) with DRM_MODE_CONNECTOR_DisplayPort (= 10). Which would never succeed. Fix it to check for DRM_MODE_ENCODER_TMDS. Fixes: d13e36d7d222 ("drm/msm/dp: add audio support for Display Port on MSM") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220217035358.465904-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-18drm/msm/dpu: drop unused access macrosDmitry Baryshkov1-16/+0
The access macros BLK_foo are not used by the code, drop them. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://lore.kernel.org/r/20220215145306.3470924-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-18drm/msm/dpu: Only create debugfs for PRIMARY minorBjorn Andersson1-0/+4
dpu_kms_debugfs_init() is invoked for each minor being registered. Most of the files created are unrelated to the minor, so there's no reason to present them per minor. The exception to this is the DisplayPort code, which ends up invoking dp_debug_get() for each minor, each time associate the allocated object with dp->debug. As such dp_debug will create debugfs files in both the PRIMARY and the RENDER minor's debugfs directory, but only the last reference will be remembered. The only use of this reference today is in the cleanup path in dp_display_deinit_sub_modules() and the dp_debug_private object does outlive the debugfs entries in either case, so there doesn't seem to be any adverse effects of this, but per the code the current behavior is unexpected, so change it to only create debugfs files for the PRIMARY minor. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> [DB: slightly change description and in-patch comment] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://lore.kernel.org/r/20220212003811.1818774-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-18drm/msm/dpu: Add SC8180x to hw catalogRob Clark4-0/+132
Add SC8180x to the hardware catalog, for initial support for the platform. Due to limitations in the DP driver only one of the four DP interfaces is left enabled. The SC8180x platform supports the newly added DPU_INTF_WIDEBUS flag and the Windows-on-Snapdragon bootloader leaves the widebus bit set, so this is flagged appropriately to ensure widebus is disabled - for now. Signed-off-by: Rob Clark <robdclark@chromium.org> [bjorn: Reworked intf and irq definitions] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-18drm/msm/dpu: Add INTF_5 interruptsBjorn Andersson2-0/+7
SC8180x has the eDP controller wired up to INTF_5, so add the interrupt register block for this interface to the list. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220215043353.1256754-1-bjorn.andersson@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-18drm/msm/dpu: fix error handling in dpu_rm_initDmitry Baryshkov1-6/+6
Using IS_ERR_OR_NULL() together with PTR_ERR() is a typical mistake. If the value is NULL, then the function will return 0 instead of a proper return code. Moreover none of dpu_hw_*_init() functions can return NULL. So, replace all dpu_rm_init()'s IS_ERR_OR_NULL() calls with IS_ERR(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://lore.kernel.org/r/20220121210618.3482550-6-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-18drm/msm/dpu: stop embedding dpu_hw_blk into dpu_hw_intfDmitry Baryshkov3-28/+9
Now as dpu_hw_intf is not hanled by dpu_rm_get_assigned_resources, there is no point in embedding the (empty) struct dpu_hw_blk into dpu_hw_intf (and using typecasts between dpu_hw_blk and dpu_hw_intf). Drop it and use dpu_hw_intf directly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://lore.kernel.org/r/20220121210618.3482550-5-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-03 16:01:43 +0000