summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/msm/dp
AgeCommit message (Collapse)AuthorFilesLines
2022-09-02Merge tag 'drm-msm-fixes-2022-08-27' of ↵Dave Airlie1-1/+1
https://gitlab.freedesktop.org/drm/msm into drm-fixes Fixes for v6.0 - Fix for inconsistent indenting in function msm_dsi_dphy_timing_calc_v3. This fixes a smatch warning reported by kbot - Fix to make eDP the first connector in the connected list. This was mainly done to address a screen corruption issue we were seeing on sc7280 boards which have eDP as the primary display. The corruption itself is from usermode but we decided to fix it this way because things work correct with the primary display as the first one for usermode - Fix to populate intf_cfg correctly before calling reset_intf_cfg(). Without this, the display pipeline is not torn down correctly for writeback - Specify the correct number of DSI regulators for SDM660. It should have been 1 but 2 was mentioned - Specify the correct number of DSI regulators for MSM8996. It should have been 3 but 2 was mentioned - Fix for removing DP_RECOVERED_CLOCK_OUT_EN bit for tps4 link training for DP. This was causing link training failures and hence no display for a specific DP to HDMI cable on chromebooks - Fix probe-deferral crash in gpu devfreq - Fix gpu debugfs deadlock Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtuY=jd44itwTkLXVqhnoKgY0BswPTrxDTxCiPG3WbmLA@mail.gmail.com
2022-08-11drm/msm/dp: delete DP_RECOVERED_CLOCK_OUT_EN to fix tps4Kuogee Hsieh1-1/+1
Data Symbols scrambled is required for tps4 at link training 2. Therefore SCRAMBLING_DISABLE bit should not be set for tps4 to work. RECOVERED_CLOCK_OUT_EN is for enable simple EYE test for jitter measurement with minimal equipment for embedded applications purpose and is not required to be set during normal operation. Current implementation always have RECOVERED_CLOCK_OUT_EN bit set which cause SCRAMBLING_DISABLE bit wrongly set at tps4 which prevent tps4 from working. This patch delete setting RECOVERED_CLOCK_OUT_EN to fix SCRAMBLING_DISABLE be wrongly set at tps4. Changes in v2: -- fix Fixes tag Changes in v3: -- revise commit text Changes in v4: -- fix commit text newline Changes in v5: -- fix commit text line over 75 chars Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/497194/ Link: https://lore.kernel.org/r/1660258670-4200-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2022-08-04Merge tag 'char-misc-6.0-rc1' of ↵Linus Torvalds3-115/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the large set of char and misc and other driver subsystem changes for 6.0-rc1. Highlights include: - large set of IIO driver updates, additions, and cleanups - new habanalabs device support added (loads of register maps much like GPUs have) - soundwire driver updates - phy driver updates - slimbus driver updates - tiny virt driver fixes and updates - misc driver fixes and updates - interconnect driver updates - hwtracing driver updates - fpga driver updates - extcon driver updates - firmware driver updates - counter driver update - mhi driver fixes and updates - binder driver fixes and updates - speakup driver fixes All of these have been in linux-next for a while without any reported problems" * tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (634 commits) drivers: lkdtm: fix clang -Wformat warning char: remove VR41XX related char driver misc: Mark MICROCODE_MINOR unused spmi: trace: fix stack-out-of-bound access in SPMI tracing functions dt-bindings: iio: adc: Add compatible for MT8188 iio: light: isl29028: Fix the warning in isl29028_remove() iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes iio: fix iio_format_avail_range() printing for none IIO_VAL_INT iio: adc: max1027: unlock on error path in max1027_read_single_value() iio: proximity: sx9324: add empty line in front of bullet list iio: magnetometer: hmc5843: Remove duplicate 'the' iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr() iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr() ...
2022-07-19Merge tag 'phy-for-5.20' of ↵Greg Kroah-Hartman3-115/+2
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy-for-5.20 - New support: - Samsung FSD ufs phy - Mediatek MT8365 dsi and tphy support - Amlogic G12A Analog D-PHY driver - Mediatek MT8188 tphy support - Mediatek PCIe phy driver - Cadence J721e DPHY support - Qualcomm IPQ8074 PCIe Gen3 PHY support - Nvidia Tegra PCIe PIPE2UPHY support - Updates: - Split of Qualcomm combo qmp phy driver to ufs, usb, pcie phy drivers and associated cleanup of these drivers * tag 'phy-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (115 commits) dt-bindings: phy: mediatek: tphy: add compatible for mt8188 phy: rockchip-inno-usb2: Ignore OTG IRQs in host mode phy: qcom-qmp-usb: statify qmp_phy_vreg_l phy: stm32: fix error return in stm32_usbphyc_phy_init phy: phy-mtk-dp: change mtk_dp_phy_driver to static phy: freescale: Add i.MX8qm Mixel LVDS PHY support dt-bindings: phy: Add Freescale i.MX8qm Mixel LVDS PHY binding dt-bindings: vendor-prefixes: Add prefix for Mixel, Inc. phy: cadence-torrent: Remove unused `regmap` field from state struct phy: cadence: Sierra: Remove unused `regmap` field from state struct phy: samsung-ufs: ufs: change phy on/off control phy: samsung-ufs: convert phy clk usage to clk_bulk API phy: qcom-qmp-usb: define QPHY_V2_PCS_PLL_LOCK_CHK_DLY_TIME register phy: qcom-qmp-usb: replace FLL layout writes for msm8996 phy: qcom-qmp: pcs-pcie-v4: add missing registers phy: qcom-qmp: pcs-v3: add missing registers phy: qcom-qmp: qserdes-com-v5: add missing registers phy: qcom-qmp: qserdes-com-v4: add missing registers phy: qcom-qmp: qserdes-com-v3: add missing registers phy: qcom-qmp: qserdes-com: add missing registers ...
2022-07-13Merge tag 'drm-msm-next-2022-07-10' of ↵Dave Airlie10-353/+82
https://gitlab.freedesktop.org/drm/msm into drm-next Next for v5.20 GPU: - a619 support - Fix for unclocked GMU register access - Devcore dump enhancements Core: - client utilization via fdinfo support - fix fence rollover issue - gem: Lockdep false-positive warning fix - gem: Switch to pfn mappings DPU: - constification of HW catalog - support for using encoder as CRC source - WB support on sc7180 - WB resolution fixes DP: - dropped custom bulk clock implementation - made dp_bridge_mode_valid() return MODE_CLOCK_HIGH where applicable - fix link retraining on resolution change MDP5: - MSM8953 perf data HDMI: - YAML'ification of schema - dropped obsolete GPIO support - misc cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtuqswBGPw-kCYzJvckK2RR1XTeUEgaXwVG_mvpbv3gPA@mail.gmail.com
2022-07-13Backmerge tag 'v5.19-rc6' of ↵Dave Airlie3-17/+36
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Backmerge in rc6 so I can merge msm next easier. Linux 5.19-rc6 Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-07-07drm/msm/dp: delete vdda regulator related functions from eDP/DP controllerKuogee Hsieh3-115/+2
Vdda regulators are related to both eDP and DP phy so that it should be managed at eDP and DP phy driver instead of controller. This patch removes vdda regulators related functions out of eDP/DP controller. Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/1657038556-2231-4-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-06drm/msm/dp: remove dp_display_en/disable prototypes and data argumentDmitry Baryshkov1-6/+3
Remove unused dp_display_en/disable prototypes. While we are at it, remove extra 'data' argument that is unused. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/490104/ Link: https://lore.kernel.org/r/20220617232434.1139950-3-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm/dp: rename second dp_display_enable()'s argumentDmitry Baryshkov1-3/+3
To follow up recent changes, rename (and change type of) second dp_display_enable()'s argument from generic u32 data to bool force_link_train, which is later passed to dp_ctrl_on_stream(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/490102/ Link: https://lore.kernel.org/r/20220617232434.1139950-2-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm/dp: remove unused stubsDmitry Baryshkov1-35/+0
Refactoring DP code transformed several functions into empty stubs. Remove them. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/490100/ Link: https://lore.kernel.org/r/20220617232434.1139950-1-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-04drm/msm/dp: use ARRAY_SIZE for calculating num_descsDmitry Baryshkov1-19/+27
If for some reason the msm_dp_config::descs array starts from non-zero index or contains the hole, setting the msm_dp_config::num_descs might be not that obvious and error-prone. Use ARRAY_SIZE to set this field rather than encoding the value manually. Reported-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/491399/ Link: https://lore.kernel.org/r/20220627165413.657142-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dp: Remove encoder pointer from struct msm_dpStephen Boyd4-9/+6
We don't need to stash the encoder here. Instead we can simply pass it around as an argument. Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/491187/ Link: https://lore.kernel.org/r/20220625002811.3225344-1-swboyd@chromium.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dp: make dp_bridge_mode_valid() more preciseDmitry Baryshkov1-1/+1
Make dp_connector_mode_valid() return precise MODE_CLOCK_HIGH rather than generic MODE_BAD in case the mode clock is higher than DP_MAX_PIXEL_CLK_KHZ (675 MHz). Reviewed-by: Kuogee Hsieh<quic_khsieh@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489554/ Link: https://lore.kernel.org/r/20220615115920.6768-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dp: rewrite dss_module_power to use bulk clock functionsDmitry Baryshkov6-173/+34
In order to simplify DP code, drop hand-coded loops over clock arrays, replacing them with clk_bulk_* functions. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/474717/ Link: https://lore.kernel.org/r/20220217055529.499829-6-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dp: inline dp_power_clk_set_rate()Dmitry Baryshkov1-17/+5
Inline the dp_power_clk_set_rate() function, replacing it with the call to msm_dss_enable_clk(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/474719/ Link: https://lore.kernel.org/r/20220217055529.499829-5-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dp: set stream_pixel rate directlyDmitry Baryshkov5-60/+1
The only clock for which we set the rate is the "stream_pixel". Rather than storing the rate and then setting it by looping over all the clocks, set the clock rate directly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/474714/ Link: https://lore.kernel.org/r/20220217055529.499829-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dp: "inline" dp_ctrl_set_clock_rate("ctrl_link")Dmitry Baryshkov2-34/+6
"ctrl_link" is the clock from DP_CTRL_PM module. The result of setting the rate for it would be a call to dev_pm_opp_set_rate(). Instead of saving the rate inside struct dss_module_power, call the devm_pm_opp_set_rate() directly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/474712/ Link: https://lore.kernel.org/r/20220217055529.499829-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-06-29Merge tag 'drm-msm-fixes-2022-06-28' of ↵Dave Airlie1-0/+2
https://gitlab.freedesktop.org/drm/msm into drm-fixes Fixes for v5.19-rc5 - Fix to increment vsync_cnt before calling drm_crtc_handle_vblank so that userspace sees the value *after* it is incremented if waiting for vblank events - Fix to reset drm_dev to NULL in dp_display_unbind to avoid a crash in probe/bind error paths - Fix to resolve the smatch error of de-referencing before NULL check in dpu_encoder_phys_wb.c - Fix error return to userspace if fence-id allocation fails in submit ioctl Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvswNKdd02EYKYv5Zjv7f+mcqeWC7hHQ1SBjqYzN_ZHnA@mail.gmail.com
2022-06-28Merge tag 'drm-msm-fixes-2022-06-28' into msm-next-stagingRob Clark3-17/+36
Merge v5.19 fixes to avoid merge conflicts Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-06-24Merge tag 'drm-msm-fixes-2022-06-20' of ↵Dave Airlie3-17/+34
https://gitlab.freedesktop.org/drm/msm into drm-fixes Fixes for v5.19-rc4 - Workaround for parade DSI bridge power sequencing - Fix for multi-planar YUV format offsets - Limiting WB modes to max sspp linewidth - Fixing the supported rotations to add 180 back for IGT - Fix to handle pm_runtime_get_sync() errors to avoid unclocked access in the bind() path for dpu driver - Fix the irq_free() without request issue which was a being hit frequently in CI. - Fix to add minimum ICC vote in the msm_mdss pm_resume path to address bootup splats - Fix to avoid dereferencing without checking in WB encoder - Fix to avoid crash during suspend in DP driver by ensuring interrupt mask bits are updated - Remove unused code from dpu_encoder_virt_atomic_check() - Fix to remove redundant init of dsc variable - Fix to ensure mmap offset is initialized to avoid memory corruption from unpin/evict - Fix double runpm disable in probe-defer path - VMA fenced-unpin fixes - Fix for WB max-width - Fix for rare dp resolution change issue Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvdsOF1-+WfTWyEyu33XPcvxOCU00G-dz7EF2J+fdyUHg@mail.gmail.com
2022-06-23drm/msm/dp: reset drm_dev to NULL at dp_display_unbind()Kuogee Hsieh1-0/+2
During msm initialize phase, dp_display_unbind() will be called to undo initializations had been done by dp_display_bind() previously if there is error happen at msm_drm_bind. Under this kind of circumstance, drm_device may not be populated completed which causes system crash at drm_dev_dbg(). This patch reset drm_dev to NULL so that following drm_dev_dbg() will not refer to any internal fields of drm_device to prevent system from crashing. Below are panic stack trace, [ 53.584904] Unable to handle kernel paging request at virtual address 0000000070018001 . [ 53.702212] Hardware name: Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+) (DT) [ 53.710445] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 53.717596] pc : string_nocheck+0x1c/0x64 [ 53.721738] lr : string+0x54/0x60 [ 53.725162] sp : ffffffc013d6b650 [ 53.728590] pmr_save: 000000e0 [ 53.731743] x29: ffffffc013d6b650 x28: 0000000000000002 x27: 0000000000ffffff [ 53.739083] x26: ffffffc013d6b710 x25: ffffffd07a066ae0 x24: ffffffd07a419f97 [ 53.746420] x23: ffffffd07a419f99 x22: ffffff81fef360d4 x21: ffffff81fef364d4 [ 53.753760] x20: ffffffc013d6b6f8 x19: ffffffd07a06683c x18: 0000000000000000 [ 53.761093] x17: 4020386678302f30 x16: 00000000000000b0 x15: ffffffd0797523c8 [ 53.768429] x14: 0000000000000004 x13: ffff0000ffffff00 x12: ffffffd07a066b2c [ 53.775780] x11: 0000000000000000 x10: 000000000000013c x9 : 0000000000000000 [ 53.783117] x8 : ffffff81fef364d4 x7 : 0000000000000000 x6 : 0000000000000000 [ 53.790445] x5 : 0000000000000000 x4 : ffff0a00ffffff04 x3 : ffff0a00ffffff04 [ 53.797783] x2 : 0000000070018001 x1 : ffffffffffffffff x0 : ffffff81fef360d4 [ 53.805136] Call trace: [ 53.807667] string_nocheck+0x1c/0x64 [ 53.811439] string+0x54/0x60 [ 53.814498] vsnprintf+0x374/0x53c [ 53.818009] pointer+0x3dc/0x40c [ 53.821340] vsnprintf+0x398/0x53c [ 53.824854] vscnprintf+0x3c/0x88 [ 53.828274] __trace_array_vprintk+0xcc/0x2d4 [ 53.832768] trace_array_printk+0x8c/0xb4 [ 53.836900] drm_trace_printf+0x74/0x9c [ 53.840875] drm_dev_dbg+0xfc/0x1b8 [ 53.844480] dp_pm_suspend+0x70/0xf8 [ 53.848164] dpm_run_callback+0x60/0x1a0 [ 53.852222] __device_suspend+0x304/0x3f4 [ 53.856363] dpm_suspend+0xf8/0x3a8 [ 53.859959] dpm_suspend_start+0x8c/0xc0 Fixes: 570d3e5d28db ("drm/msm/dp: stop event kernel thread when DP unbind") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/490756/ Link: https://lore.kernel.org/r/1655927731-22396-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2022-06-22Merge tag 'drm-misc-next-2022-06-17' of ↵Dave Airlie1-6/+4
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.20: UAPI Changes: Cross-subsystem Changes: * dma-buf: Add sync-file API; Set DMA mask for udmabuf devices * fbcon: Cleanups * fbdev: Disable firmware-device registration when first native driver loads * iosys-map: Documentation fixes Core Changes: * edid: Use struct drm_edid in more places * gem-cma-helper: Improve documentation * of: Add data-lane helpers and convert drivers * syncobj: Fixes Driver Changes: * amdgpu: Build fixes * ast: Support multiple outputs * bochs: Include <linux/module.h> * bridge: adv7511: I2C fixes; anx7625: Fix error handling; lt6505: Kconfig fixes * display/dp: Documentation fixes * display/dp-mst: Read extended DPCD capabilities during system resume * logicvc: Add new driver * magag200: Build fixes * nouveau: Cleanups * panel: Add backlight support; nt36672a: DT backlight support * qxl: Cleanups * sun4i: HDMI PHY cleanups * vc4: Add support for BCM2711 * virt-gpu: Avoid NULL dereference; Fix error checks; Cleanups * vkms: Allocate output buffer with vmalloc(); Fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YqwriEhn0l4uO+Gn@linux-uq9g
2022-06-18drm/msm/dp: force link training for display resolution changeKuogee Hsieh3-16/+32
Display resolution change is implemented through drm modeset. Older modeset (resolution) has to be disabled first before newer modeset (resolution) can be enabled. Display disable will turn off both pixel clock and main link clock so that main link have to be re-trained during display enable to have new video stream flow again. At current implementation, display enable function manually kicks up irq_hpd_handle which will read panel link status and start link training if link status is not in sync state. However, there is rare case that a particular panel links status keep staying in sync for some period of time after main link had been shut down previously at display disabled. In this case, main link retraining will not be executed by irq_hdp_handle(). Hence video stream of newer display resolution will fail to be transmitted to panel due to main link is not in sync between host and panel. This patch will bypass irq_hpd_handle() in favor of directly call dp_ctrl_on_stream() to always perform link training in regardless of main link status. So that no unexpected exception resolution change failure cases will happen. Also this implementation are more efficient than manual kicking off irq_hpd_handle function. Changes in v2: -- set force_link_train flag on DP only (is_edp == false) Changes in v3: -- revise commit text -- add Fixes tag Changes in v4: -- revise commit text Changes in v5: -- fix spelling at commit text Changes in v6: -- split dp_ctrl_on_stream() for phy test case -- revise commit text for modeset Changes in v7: -- drop 0 assignment at local variable (ret = 0) Changes in v8: -- add patch to remove pixel_rate from dp_ctrl Changes in v9: -- forward declare dp_ctrl_on_stream_phy_test_report() Fixes: 62671d2ef24b ("drm/msm/dp: fixes wrong connection state caused by failure of link train") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/489895/ Link: https://lore.kernel.org/r/1655411200-7255-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-06-18drm/msm/dp: check core_initialized before disable interrupts at ↵Kuogee Hsieh1-1/+2
dp_display_unbind() During msm initialize phase, dp_display_unbind() will be called to undo initializations had been done by dp_display_bind() previously if there is error happen at msm_drm_bind. In this case, core_initialized flag had to be check to make sure clocks is on before update DP controller register to disable HPD interrupts. Otherwise system will crash due to below NOC fatal error. QTISECLIB [01f01a7ad]CNOC2 ERROR: ERRLOG0_LOW = 0x00061007 QTISECLIB [01f01a7ad]GEM_NOC ERROR: ERRLOG0_LOW = 0x00001007 QTISECLIB [01f0371a0]CNOC2 ERROR: ERRLOG0_HIGH = 0x00000003 QTISECLIB [01f055297]GEM_NOC ERROR: ERRLOG0_HIGH = 0x00000003 QTISECLIB [01f072beb]CNOC2 ERROR: ERRLOG1_LOW = 0x00000024 QTISECLIB [01f0914b8]GEM_NOC ERROR: ERRLOG1_LOW = 0x00000042 QTISECLIB [01f0ae639]CNOC2 ERROR: ERRLOG1_HIGH = 0x00004002 QTISECLIB [01f0cc73f]GEM_NOC ERROR: ERRLOG1_HIGH = 0x00004002 QTISECLIB [01f0ea092]CNOC2 ERROR: ERRLOG2_LOW = 0x0009020c QTISECLIB [01f10895f]GEM_NOC ERROR: ERRLOG2_LOW = 0x0ae9020c QTISECLIB [01f125ae1]CNOC2 ERROR: ERRLOG2_HIGH = 0x00000000 QTISECLIB [01f143be7]GEM_NOC ERROR: ERRLOG2_HIGH = 0x00000000 QTISECLIB [01f16153a]CNOC2 ERROR: ERRLOG3_LOW = 0x00000000 QTISECLIB [01f17fe07]GEM_NOC ERROR: ERRLOG3_LOW = 0x00000000 QTISECLIB [01f19cf89]CNOC2 ERROR: ERRLOG3_HIGH = 0x00000000 QTISECLIB [01f1bb08e]GEM_NOC ERROR: ERRLOG3_HIGH = 0x00000000 QTISECLIB [01f1d8a31]CNOC2 ERROR: SBM1 FAULTINSTATUS0_LOW = 0x00000002 QTISECLIB [01f1f72a4]GEM_NOC ERROR: SBM0 FAULTINSTATUS0_LOW = 0x00000001 QTISECLIB [01f21a217]CNOC3 ERROR: ERRLOG0_LOW = 0x00000006 QTISECLIB [01f23dfd3]NOC error fatal changes in v2: -- drop the first patch (drm/msm: enable msm irq after all initializations are done successfully at msm_drm_init()) since the problem had been fixed by other patch Fixes: 570d3e5d28db ("drm/msm/dp: stop event kernel thread when DP unbind") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/488387/ Link: https://lore.kernel.org/r/1654538139-7450-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-06-13drm/msm: Fix convert to drm_of_get_data_lanes_countMarek Vasut1-2/+2
Add missing header file into dsi_host.c and encode data-lanes string directly into the warning message in the driver to avoid build issues detected by lkp. Fixes: 185443efa26a ("drm/msm: Convert to drm_of_get_data_lanes_count") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Rob Clark <robdclark@gmail.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Sean Paul <sean@poorly.run> To: dri-devel@lists.freedesktop.org Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220612143349.105766-1-marex@denx.de
2022-06-12drm/msm: Convert to drm_of_get_data_lanes_countMarek Vasut1-4/+2
Convert driver to use this new helper to standardize OF "data-lanes" parsing. Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Rob Clark <robdclark@gmail.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Sean Paul <sean@poorly.run> To: dri-devel@lists.freedesktop.org Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-10-marex@denx.de
2022-06-03Merge tag 'drm-next-2022-06-03-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-2/+7
Pull more drm updates from Dave Airlie: "This is mostly regular fixes, msm and amdgpu. There is a tegra patch that is bit of prep work for a 5.20 feature to avoid some inter-tree syncs, and a couple of late addition amdgpu uAPI changes but best to get those in early, and the userspace pieces are ready. msm: - Limiting WB modes to max sspp linewidth - Fixing the supported rotations to add 180 back for IGT - Fix to handle pm_runtime_get_sync() errors to avoid unclocked access in the bind() path for dpu driver - Fix the irq_free() without request issue which was a big-time hitter in the CI-runs. amdgpu: - Update fdinfo to the common drm format - uapi: - Add VM_NOALLOC GPUVM attribute to prevent buffers for going into the MALL - Add AMDGPU_GEM_CREATE_DISCARDABLE flag to create buffers that can be discarded on eviction - Mesa code which uses these: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16466 - Link training fixes - DPIA fixes - Misc code cleanups - Aux fixes - Hotplug fixes - More FP clean up - Misc GFX9/10 fixes - Fix a possible memory leak in SMU shutdown - SMU 13 updates - RAS fixes - TMZ fixes - GC 11 updates - SMU 11 metrics fixes - Fix coverage blend mode for overlay plane - Note DDR vs LPDDR memory - Fuzz fix for CS IOCTL - Add new PCI DID amdkfd: - Clean up hive setup - Misc fixes tegra: - add some prelim 5.20 work to avoid inter-tree mess" * tag 'drm-next-2022-06-03-1' of git://anongit.freedesktop.org/drm/drm: (57 commits) drm/msm/dpu: Move min BW request and full BW disable back to mdss drm/msm/dpu: Fix pointer dereferenced before checking drm/msm/dpu: Remove unused code drm/msm/disp/dpu1: remove superfluous init drm/msm/dp: Always clear mask bits to disable interrupts at dp_ctrl_reset_irq_ctrl() gpu: host1x: Add context bus drm/amdgpu: add drm-client-id to fdinfo v2 drm/amdgpu: Convert to common fdinfo format v5 drm/amdgpu: bump minor version number drm/amdgpu: add AMDGPU_VM_NOALLOC v2 drm/amdgpu: add AMDGPU_GEM_CREATE_DISCARDABLE drm/amdgpu: add beige goby PCI ID drm/amd/pm: Return auto perf level, if unsupported drm/amdkfd: fix typo in comment drm/amdgpu/gfx: fix typos in comments drm/amdgpu/cs: make commands with 0 chunks illegal behaviour. drm/amdgpu: differentiate between LP and non-LP DDR memory drm/amdgpu: Resolve pcie_bif RAS recovery bug drm/amdgpu: clean up asd on the ta_firmware_header_v2_0 drm/amdgpu/discovery: validate VCN and SDMA instances ...
2022-06-03Merge tag 'msm-next-5.19-fixes-06-01' of ↵Dave Airlie1-2/+7
https://gitlab.freedesktop.org/abhinavk/msm into drm-next 5.19 fixes for msm-next - Fix to add minimum ICC vote in the msm_mdss pm_resume path to address bootup splats - Fix to avoid dereferencing without checking in WB encoder - Fix to avoid crash during suspend in DP driver by ensuring interrupt mask bits are updated - Remove unused code from dpu_encoder_virt_atomic_check() - Fix to remove redundant init of dsc variable Signed-off-by: Dave Airlie <airlied@redhat.com> From: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/927b201e-a734-a29d-b9fb-b9889e1f7795@quicinc.com
2022-06-01drm/msm/dp: Always clear mask bits to disable interrupts at ↵Kuogee Hsieh1-2/+7
dp_ctrl_reset_irq_ctrl() dp_catalog_ctrl_reset() will software reset DP controller. But it will not reset programmable registers to default value. DP driver still have to clear mask bits to interrupt status registers to disable interrupts after software reset of controller. At current implementation, dp_ctrl_reset_irq_ctrl() will software reset dp controller but did not call dp_catalog_ctrl_enable_irq(false) to clear hpd related interrupt mask bits to disable hpd related interrupts due to it mistakenly think hpd related interrupt mask bits will be cleared by software reset of dp controller automatically. This mistake may cause system to crash during suspending procedure due to unexpected irq fired and trigger event thread to access dp controller registers with controller clocks are disabled. This patch fixes system crash during suspending problem by removing "enable" flag condition checking at dp_ctrl_reset_irq_ctrl() so that hpd related interrupt mask bits are cleared to prevent unexpected from happening. Changes in v2: -- add more details commit text Changes in v3: -- add synchrons_irq() -- add atomic_t suspended Changes in v4: -- correct Fixes's commit ID -- remove synchrons_irq() Changes in v5: -- revise commit text Changes in v6: -- add event_lock to protect "suspended" Changes in v7: -- delete "suspended" flag Fixes: 989ebe7bc446 ("drm/msm/dp: do not initialize phy until plugin interrupt received") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/486591/ Link: https://lore.kernel.org/r/1652804494-19650-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2022-05-25Merge tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drmLinus Torvalds18-534/+721
Pull drm updates from Dave Airlie: "Intel have enabled DG2 on certain SKUs for laptops, AMD has started some new GPU support, msm has user allocated VA controls dma-buf: - add dma_resv_replace_fences - add dma_resv_get_singleton - make dma_excl_fence private core: - EDID parser refactorings - switch drivers to drm_mode_copy/duplicate - DRM managed mutex initialization display-helper: - put HDMI, SCDC, HDCP, DSC and DP into new module gem: - rework fence handling ttm: - rework bulk move handling - add common debugfs for resource managers - convert to kvcalloc format helpers: - support monochrome formats - RGB888, RGB565 to XRGB8888 conversions fbdev: - cfb/sys_imageblit fixes - pagelist corruption fix - create offb platform device - deferred io improvements sysfb: - Kconfig rework - support for VESA mode selection bridge: - conversions to devm_drm_of_get_bridge - conversions to panel_bridge - analogix_dp - autosuspend support - it66121 - audio support - tc358767 - DSI to DPI support - icn6211 - PLL/I2C fixes, DT property - adv7611 - enable DRM_BRIDGE_OP_HPD - anx7625 - fill ELD if no monitor - dw_hdmi - add audio support - lontium LT9211 support, i.MXMP LDB - it6505: Kconfig fix, DPCD set power fix - adv7511 - CEC support for ADV7535 panel: - ltk035c5444t, B133UAN01, NV3052C panel support - DataImage FG040346DSSWBG04 support - st7735r - DT bindings fix - ssd130x - fixes i915: - DG2 laptop PCI-IDs ("motherboard down") - Initial RPL-P PCI IDs - compute engine ABI - DG2 Tile4 support - DG2 CCS clear color compression support - DG2 render/media compression formats support - ATS-M platform info - RPL-S PCI IDs added - Bump ADL-P DMC version to v2.16 - Support static DRRS - Support multiple eDP/LVDS native mode refresh rates - DP HDR support for HSW+ - Lots of display refactoring + fixes - GuC hwconfig support and query - sysfs support for multi-tile - fdinfo per-client gpu utilisation - add geometry subslices query - fix prime mmap with LMEM - fix vm open count and remove vma refcounts - contiguous allocation fixes - steered register write support - small PCI BAR enablement - GuC error capture support - sunset igpu legacy mmap support for newer devices - GuC version 70.1.1 support amdgpu: - Initial SoC21 support - SMU 13.x enablement - SMU 13.0.4 support - ttm_eu cleanups - USB-C, GPUVM updates - TMZ fixes for RV - RAS support for VCN - PM sysfs code cleanup - DC FP rework - extend CG/PG flags to 64-bit - SI dpm lockdep fix - runtime PM fixes amdkfd: - RAS/SVM fixes - TLB flush fixes - CRIU GWS support - ignore bogus MEC signals more efficiently msm: - Fourcc modifier for tiled but not compressed layouts - Support for userspace allocated IOVA (GPU virtual address) - DPU: DSC (Display Stream Compression) support - DP: eDP support - DP: conversion to use drm_bridge and drm_bridge_connector - Merge DPU1 and MDP5 MDSS driver - DPU: writeback support nouveau: - make some structures static - make some variables static - switch to drm_gem_plane_helper_prepare_fb radeon: - misc fixes/cleanups mxsfb: - rework crtc mode setting - LCDIF CRC support etnaviv: - fencing improvements - fix address space collisions - cleanup MMU reference handling gma500: - GEM/GTT improvements - connector handling fixes komeda: - switch to plane reset helper mediatek: - MIPI DSI improvements omapdrm: - GEM improvements qxl: - aarch64 support vc4: - add a CL submission tracepoint - HDMI YUV support - HDMI/clock improvements - drop is_hdmi caching virtio: - remove restriction of non-zero blob types vmwgfx: - support for cursormob and cursorbypass 4 - fence improvements tidss: - reset DISPC on startup solomon: - SPI support - DT improvements sun4i: - allwinner D1 support - drop is_hdmi caching imx: - use swap() instead of open-coding - use devm_platform_ioremap_resource - remove redunant initializations ast: - Displayport support rockchip: - Refactor IOMMU initialisation - make some structures static - replace drm_detect_hdmi_monitor with drm_display_info.is_hdmi - support swapped YUV formats, - clock improvements - rk3568 support - VOP2 support mediatek: - MT8186 support tegra: - debugabillity improvements" * tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drm: (1740 commits) drm/i915/dsi: fix VBT send packet port selection for ICL+ drm/i915/uc: Fix undefined behavior due to shift overflowing the constant drm/i915/reg: fix undefined behavior due to shift overflowing the constant drm/i915/gt: Fix use of static in macro mismatch drm/i915/audio: fix audio code enable/disable pipe logging drm/i915: Fix CFI violation with show_dynamic_id() drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c drm/i915/gt: Fix build error without CONFIG_PM drm/msm/dpu: handle pm_runtime_get_sync() errors in bind path drm/msm/dpu: add DRM_MODE_ROTATE_180 back to supported rotations drm/msm: don't free the IRQ if it was not requested drm/msm/dpu: limit writeback modes according to max_linewidth drm/amd: Don't reset dGPUs if the system is going to s2idle drm/amdgpu: Unmap legacy queue when MES is enabled drm: msm: fix possible memory leak in mdp5_crtc_cursor_set() drm/msm: Fix fb plane offset calculation drm/msm/a6xx: Fix refcount leak in a6xx_gpu_init drm/msm/dsi: don't powerup at modeset time for parade-ps8640 drm/rockchip: Change register space names in vop2 dt-bindings: display: rockchip: make reg-names mandatory for VOP2 ...
2022-05-11Merge tag 'drm-msm-next-2022-05-09' of ↵Dave Airlie18-530/+716
https://gitlab.freedesktop.org/drm/msm into drm-next - Fourcc modifier for tiled but not compressed layouts - Support for userspace allocated IOVA (GPU virtual address) - Devfreq clamp_to_idle fix - DPU: DSC (Display Stream Compression) support - DPU: inline rotation support on SC7280 - DPU: update DP timings to follow vendor recommendations - DP, DPU: add support for wide bus (on newer chipsets) - DP: eDP support - Merge DPU1 and MDP5 MDSS driver, make dpu/mdp device the master component - MDSS: optionally reset the IP block at the bootup to drop bootloader state - Properly register and unregister internal bridges in the DRM framework - Complete DPU IRQ cleanup - DP: conversion to use drm_bridge and drm_bridge_connector - eDP: drop old eDP parts again - DPU: writeback support - Misc small fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvJCr_1D8d0dgmyQC5HD4gmXeZw=bFV_CNCfceZbpMxRw@mail.gmail.com
2022-05-07drm/msm/dp: fix event thread stuck in wait_event after kthread_stop()Kuogee Hsieh1-4/+9
Event thread supposed to exit from its while loop after kthread_stop(). However there may has possibility that event thread is pending in the middle of wait_event due to condition checking never become true. To make sure event thread exit its loop after kthread_stop(), this patch OR kthread_should_stop() into wait_event's condition checking so that event thread will exit its loop after kernal_stop(). Changes in v2: -- correct spelling error at commit title Changes in v3: -- remove unnecessary parenthesis -- while(1) to replace while (!kthread_should_stop()) Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 570d3e5d28db ("drm/msm/dp: stop event kernel thread when DP unbind") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/484576/ Link: https://lore.kernel.org/r/1651595136-24312-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-06Merge tag 'drm-msm-fixes-2022-04-30' of ↵Dave Airlie3-18/+0
https://gitlab.freedesktop.org/drm/msm into drm-fixes single lockdep fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtkzqzxDLp82OaKXVrWd7nWZtkxKsuOK1wOGCDz7qF-dA@mail.gmail.com
2022-05-03Backmerge tag 'v5.18-rc5' of ↵Dave Airlie3-10/+17
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Linux 5.18-rc5 There was a build fix for arm I wanted in drm-next, so backmerge rather then cherry-pick. Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-05-02drm/msm/dp: do not stop transmitting phy test pattern during DP phy ↵Kuogee Hsieh1-8/+6
compliance test At normal operation, transmit phy test pattern has to be terminated before DP controller switch to video ready state. However during phy compliance testing, transmit phy test pattern should not be terminated until end of compliance test which usually indicated by unplugged interrupt. Only stop sending the train pattern in dp_ctrl_on_stream() if we're not doing compliance testing. We also no longer reset 'p_level' and 'v_level' within dp_ctrl_on_link() due to both 'p_level' and 'v_level' are acquired from link status at previous dpcd read and we like to use those level to start link training. Changes in v2: -- add more details commit text -- correct Fixes Changes in v3: -- drop unnecessary braces Fixes: 2e0adc765d88 ("drm/msm/dp: do not end dp link training until video is ready") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/483564/ Link: https://lore.kernel.org/r/1650995939-28467-3-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/dp: reset DP controller before transmit phy test patternKuogee Hsieh1-1/+1
DP controller state can not switch from video ready state to transmit phy pattern state at run time. DP mainlink has to be teared down followed by reset controller to default state to have DP controller switch to transmit phy test pattern state and start generate specified phy test pattern to sinker once main link setup again. Changes in v2: -- correct Fixes's commit id Fixes: 52352fe2f866 ("drm/msm/dp: use dp_ctrl_off_link_stream during PHY compliance test run") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/483563/ Link: https://lore.kernel.org/r/1650995939-28467-2-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/dp: Support the eDP modes given by panelSankeerth Billakanti1-0/+8
The eDP controller does not have a reliable way keep panel powered on to read the sink capabilities. So, the controller driver cannot validate if a mode can be supported by the source. We will rely on the panel driver to populate only the supported modes for now. Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/483313/ Link: https://lore.kernel.org/r/1650887072-16652-5-git-send-email-quic_sbillaka@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/dp: wait for hpd high before aux transactionSankeerth Billakanti5-3/+37
The source device should ensure the sink is ready before proceeding to read the sink capability or perform any aux transactions. The sink will indicate its readiness by asserting the HPD line. The controller driver needs to wait for the hpd line to be asserted by the sink before it performs any aux transactions. The eDP sink is assumed to be always connected. It needs power from the source and its HPD line will be asserted only after the panel is powered on. The panel power will be enabled from the panel-edp driver and only after that, the hpd line will be asserted. Whereas for DP, the sink can be hotplugged and unplugged anytime. The hpd line gets asserted to indicate the sink is connected and ready. Hence there is no need to wait for the hpd line to be asserted for a DP sink. Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/483312/ Link: https://lore.kernel.org/r/1650887072-16652-4-git-send-email-quic_sbillaka@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/dp: Support only IRQ_HPD and REPLUG interrupts for eDPSankeerth Billakanti2-7/+31
The panel-edp enables the eDP panel power during probe, get_modes and pre-enable. The eDP connect and disconnect interrupts for the eDP/DP controller are directly dependent on panel power. As eDP display can be assumed as always connected, the controller driver can skip the eDP connect and disconnect interrupts. Any disruption in the link status will be indicated via the IRQ_HPD interrupts. So, the eDP controller driver can just enable the IRQ_HPD and replug interrupts. The DP controller driver still needs to enable all the interrupts. Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/483310/ Link: https://lore.kernel.org/r/1650887072-16652-3-git-send-email-quic_sbillaka@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/dp: Add eDP support via aux_busSankeerth Billakanti5-29/+101
This patch adds support for generic eDP sink through aux_bus. The eDP/DP controller driver should support aux transactions originating from the panel-edp driver and hence should be initialized and ready. The panel bridge supporting the panel should be ready before the bridge connector is initialized. The generic panel probe needs the controller resources to be enabled to support the aux transactions originating from the panel probe. Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/483307/ Link: https://lore.kernel.org/r/1650887072-16652-2-git-send-email-quic_sbillaka@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/dp: tear down main link at unplug handle immediatelyKuogee Hsieh3-80/+63
Two stages are required to setup up main link to be ready to transmit video stream. Stage 1: dp_hpd_plug_handle() perform link training to set up main link stage 2: user space framework (msm_dp_display_enable()) to enable pixel clock and transfer main link to video ready state. At current implementation, when dongle unplugged dp_hdp_unplug_handle() has to wait until stage 2 completed before it can send link down uevent to user space framework to disable pixel clock followed by tearing down main link. This introduce unnecessary latency if dongle unplugged happen after stage 1 and before stage 2. It also has possibility leave main link stay at ready state after dongle unplugged if framework does not response to link down uevent notification. This will prevent next dongle plug in from working. This scenario could possibly happen when dongle unplug while system in the middle of suspending. This patch allow unplug handle to tear down main link and notify framework link down immediately if dongle unplugged happen after stage 1 and before stage 2. With this approach, dp driver is much more resilient to any different scenarios. Also redundant both dp_connect_pending_timeout() and dp_disconnect_pending_timeout() are removed to reduce logic complexity. Changes in V2: -- return -EINVAL at msm_dp_display_enable() if not in correct state -- replace ST_CONNECT_PENDING with ST_MAINLINK_READY Fixes: 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/483391/ Link: https://lore.kernel.org/r/1650927382-22461-1-git-send-email-quic_khsieh@quicinc.com [DB: fixed return values due to conversion to function merge] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/dp: fix error check return value of irq_of_parse_and_map()Lv Ruyi1-4/+3
The irq_of_parse_and_map() function returns 0 on failure, and does not return an negative value. Fixes: 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets") Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/483176/ Link: https://lore.kernel.org/r/20220424032418.3173632-1-lv.ruyi@zte.com.cn Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/dp: stop event kernel thread when DP unbindKuogee Hsieh1-8/+31
Current DP driver implementation, event thread is kept running after DP display is unbind. This patch fix this problem by disabling DP irq and stop event thread to exit gracefully at dp_display_unbind(). Changes in v2: -- start event thread at dp_display_bind() Changes in v3: -- disable all HDP interrupts at unbind -- replace dp_hpd_event_setup() with dp_hpd_event_thread_start() -- replace dp_hpd_event_stop() with dp_hpd_event_thread_stop() -- move init_waitqueue_head(&dp->event_q) to probe() -- move spin_lock_init(&dp->event_lock) to probe() Changes in v4: -- relocate both dp_display_bind() and dp_display_unbind() to bottom of file Changes in v5: -- cancel relocation of both dp_display_bind() and dp_display_unbind() Changes in v6: -- move empty event q to dp_event_thread_start() Changes in v7: -- call ktheread_stop() directly instead of dp_hpd_event_thread_stop() function Changes in v8: -- return error immediately if audio registration failed. Changes in v9: -- return error immediately if event thread create failed. Changes in v10: -- delete extra DRM_ERROR("failed to create DP event thread\n"); Fixes: 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/482399/ Link: https://lore.kernel.org/r/1650318988-17580-1-git-send-email-quic_khsieh@quicinc.com [DB: fixed Fixes tag] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/dp: remove max_pclk_khz field from dp_panel/dp_displayDmitry Baryshkov4-9/+1
Since the last commit, the max_pclk_khz became constant, it's set to DP_MAX_PIXEL_CLK_KHZ and never changed afterwards. Remove it completely and use DP_MAX_PIXEL_CLK_KHZ directly. Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/480139/ Link: https://lore.kernel.org/r/20220330223008.649274-4-dmitry.baryshkov@linaro.org [DB: applied a fix to follow connector->bridge conversion] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/dp: simplify dp_connector_get_modes()Dmitry Baryshkov3-37/+4
Since dp_panel_get_modes() handling for dp_mode was removed, dp_display_get_modes also doesn't change the passed dp_mode, drop the unused dp_mode variable being allocated unused and then freed. Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/480137/ Link: https://lore.kernel.org/r/20220330223008.649274-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/dp: drop dp_mode argument from dp_panel_get_modes()Dmitry Baryshkov3-3/+3
Since the commit ab205927592b ("drm/msm/dp: remove mode hard-coding in case of DP CTS") the function dp_panel_get_modes() doesn't use (or fill) the dp_mode argument. Drop it completely. Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/480138/ Link: https://lore.kernel.org/r/20220330223008.649274-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/dp: replace DRM_DEBUG_DP marco with drm_dbg_dpKuogee Hsieh9-183/+265
Since DRM_DEBUG_DP is deprecated in favor of drm_dbg_dp(NULL, ...), this patch replace all DRM_DEBUG_DP with drm_dbg_dp(). Changes in v4: -- replace (strucr drm_dev *)NULL with drm_dev Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/474870/ Link: https://lore.kernel.org/r/1645122930-23863-4-git-send-email-quic_khsieh@quicinc.com [DB: fixed compilation of dp_bridge_detect() caused by previous patch] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/dp: remove extra wrappers and public functionsDmitry Baryshkov4-89/+60
dp_bridge's functions are thin wrappers around the msm_dp_display_* family. Squash dp_bridge callbacks into respective msm_dp_display functions, removing the latter functions from public space. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/473858/ Link: https://lore.kernel.org/r/20220211224006.1797846-6-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/dp: replace dp_connector with drm_bridge_connectorDmitry Baryshkov2-83/+52
There is little point in having both connector and root bridge implementation in the same driver. Move connector's functionality to the bridge to let next bridge in chain to override it. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/473854/ Link: https://lore.kernel.org/r/20220211224006.1797846-5-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-27drm/msm/dp: remove fail safe mode related codeKuogee Hsieh3-18/+0
Current DP driver implementation has adding safe mode done at dp_hpd_plug_handle() which is expected to be executed under event thread context. However there is possible circular locking happen (see blow stack trace) after edp driver call dp_hpd_plug_handle() from dp_bridge_enable() which is executed under drm_thread context. After review all possibilities methods and as discussed on https://patchwork.freedesktop.org/patch/483155/, supporting EDID compliance tests in the driver is quite hacky. As seen with other vendor drivers, supporting these will be much easier with IGT. Hence removing all the related fail safe code for it so that no possibility of circular lock will happen. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> ====================================================== WARNING: possible circular locking dependency detected 5.15.35-lockdep #6 Tainted: G W ------------------------------------------------------ frecon/429 is trying to acquire lock: ffffff808dc3c4e8 (&dev->mode_config.mutex){+.+.}-{3:3}, at: dp_panel_add_fail_safe_mode+0x4c/0xa0 but task is already holding lock: ffffff808dc441e0 (&kms->commit_lock[i]){+.+.}-{3:3}, at: lock_crtcs+0xb4/0x124 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&kms->commit_lock[i]){+.+.}-{3:3}: __mutex_lock_common+0x174/0x1a64 mutex_lock_nested+0x98/0xac lock_crtcs+0xb4/0x124 msm_atomic_commit_tail+0x330/0x748 commit_tail+0x19c/0x278 drm_atomic_helper_commit+0x1dc/0x1f0 drm_atomic_commit+0xc0/0xd8 drm_atomic_helper_set_config+0xb4/0x134 drm_mode_setcrtc+0x688/0x1248 drm_ioctl_kernel+0x1e4/0x338 drm_ioctl+0x3a4/0x684 __arm64_sys_ioctl+0x118/0x154 invoke_syscall+0x78/0x224 el0_svc_common+0x178/0x200 do_el0_svc+0x94/0x13c el0_svc+0x5c/0xec el0t_64_sync_handler+0x78/0x108 el0t_64_sync+0x1a4/0x1a8 -> #2 (crtc_ww_class_mutex){+.+.}-{3:3}: __mutex_lock_common+0x174/0x1a64 ww_mutex_lock+0xb8/0x278 modeset_lock+0x304/0x4ac drm_modeset_lock+0x4c/0x7c drmm_mode_config_init+0x4a8/0xc50 msm_drm_init+0x274/0xac0 msm_drm_bind+0x20/0x2c try_to_bring_up_master+0x3dc/0x470 __component_add+0x18c/0x3c0 component_add+0x1c/0x28 dp_display_probe+0x954/0xa98 platform_probe+0x124/0x15c really_probe+0x1b0/0x5f8 __driver_probe_device+0x174/0x20c driver_probe_device+0x70/0x134 __device_attach_driver+0x130/0x1d0 bus_for_each_drv+0xfc/0x14c __device_attach+0x1bc/0x2bc device_initial_probe+0x1c/0x28 bus_probe_device+0x94/0x178 deferred_probe_work_func+0x1a4/0x1f0 process_one_work+0x5d4/0x9dc worker_thread+0x898/0xccc kthread+0x2d4/0x3d4 ret_from_fork+0x10/0x20 -> #1 (crtc_ww_class_acquire){+.+.}-{0:0}: ww_acquire_init+0x1c4/0x2c8 drm_modeset_acquire_init+0x44/0xc8 drm_helper_probe_single_connector_modes+0xb0/0x12dc drm_mode_getconnector+0x5dc/0xfe8 drm_ioctl_kernel+0x1e4/0x338 drm_ioctl+0x3a4/0x684 __arm64_sys_ioctl+0x118/0x154 invoke_syscall+0x78/0x224 el0_svc_common+0x178/0x200 do_el0_svc+0x94/0x13c el0_svc+0x5c/0xec el0t_64_sync_handler+0x78/0x108 el0t_64_sync+0x1a4/0x1a8 -> #0 (&dev->mode_config.mutex){+.+.}-{3:3}: __lock_acquire+0x2650/0x672c lock_acquire+0x1b4/0x4ac __mutex_lock_common+0x174/0x1a64 mutex_lock_nested+0x98/0xac dp_panel_add_fail_safe_mode+0x4c/0xa0 dp_hpd_plug_handle+0x1f0/0x280 dp_bridge_enable+0x94/0x2b8 drm_atomic_bridge_chain_enable+0x11c/0x168 drm_atomic_helper_commit_modeset_enables+0x500/0x740 msm_atomic_commit_tail+0x3e4/0x748 commit_tail+0x19c/0x278 drm_atomic_helper_commit+0x1dc/0x1f0 drm_atomic_commit+0xc0/0xd8 drm_atomic_helper_set_config+0xb4/0x134 drm_mode_setcrtc+0x688/0x1248 drm_ioctl_kernel+0x1e4/0x338 drm_ioctl+0x3a4/0x684 __arm64_sys_ioctl+0x118/0x154 invoke_syscall+0x78/0x224 el0_svc_common+0x178/0x200 do_el0_svc+0x94/0x13c el0_svc+0x5c/0xec el0t_64_sync_handler+0x78/0x108 el0t_64_sync+0x1a4/0x1a8 Changes in v2: -- re text commit title -- remove all fail safe mode Changes in v3: -- remove dp_panel_add_fail_safe_mode() from dp_panel.h -- add Fixes Changes in v5: -- to=dianders@chromium.org Changes in v6: -- fix Fixes commit ID Fixes: 8b2c181e3dcf ("drm/msm/dp: add fail safe mode outside of event_mutex context") Reported-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Link: https://lore.kernel.org/r/1651007534-31842-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Rob Clark <robdclark@chromium.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 07:38:59 +0000