summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/msm/disp/dpu1
AgeCommit message (Collapse)AuthorFilesLines
2018-12-03drm/msm/dpu: Ignore alpha for XBGR8888 formatJayant Shekhar1-1/+1
Alpha enable in the pixel format will help in selecting the blend rule. By keeping alpha enable to true we are allowing foreground alpha to blend with the layer. If alpha is don't care, then we should not allow pixel alpha to be part of blend equation. Signed-off-by: Jayant Shekhar <jshekhar@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-12-03drm/msm: dpu: Fix "WARNING: invalid free of devm_ allocated data"YueHaibing1-2/+0
'dpu_enc' is a member of 'drm_enc' And 'drm_enc' got allocated with devm_kzalloc in dpu_encoder_init. This gives this error message: ./drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:459:1-6: WARNING: invalid free of devm_ allocated data Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-12-03drm/msm: dpu: Don't set legacy plane->crtc pointerSean Paul1-1/+0
It causes a WARN in drm_atomic_get_plane_state(), and is not used by atomic (or dpu). Signed-off-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-28Merge tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drmLinus Torvalds31-2675/+480
Pull drm updates from Dave Airlie: "This is going to rebuild more than drm as it adds a new helper to list.h for doing bulk updates. Seemed like a reasonable addition to me. Otherwise the usual merge window stuff lots of i915 and amdgpu, not so much nouveau, and piles of everything else. Core: - Adds a new list.h helper for doing bulk list updates for TTM. - Don't leak fb address in smem_start to userspace (comes with EXPORT workaround for people using mali out of tree hacks) - udmabuf device to turn memfd regions into dma-buf - Per-plane blend mode property - ref/unref replacements with get/put - fbdev conflicting framebuffers code cleaned up - host-endian format variants - panel orientation quirk for Acer One 10 bridge: - TI SN65DSI86 chip support vkms: - GEM support. - Cursor support amdgpu: - Merge amdkfd and amdgpu into one module - CEC over DP AUX support - Picasso APU support + VCN dynamic powergating - Raven2 APU support - Vega20 enablement + kfd support - ACP powergating improvements - ABGR/XBGR display support - VCN jpeg support - xGMI support - DC i2c/aux cleanup - Ycbcr 4:2:0 support - GPUVM improvements - Powerplay and powerplay endian fixes - Display underflow fixes vmwgfx: - Move vmwgfx specific TTM code to vmwgfx - Split out vmwgfx buffer/resource validation code - Atomic operation rework bochs: - use more helpers - format/byteorder improvements qxl: - use more helpers i915: - GGTT coherency getparam - Turn off resource streamer API - More Icelake enablement + DMC firmware - Full PPGTT for Ivybridge, Haswell and Valleyview - DDB distribution based on resolution - Limited range DP display support nouveau: - CEC over DP AUX support - Initial HDMI 2.0 support virtio-gpu: - vmap support for PRIME objects tegra: - Initial Tegra194 support - DMA/IOMMU integration fixes msm: - a6xx perf improvements + clock prefix - GPU preemption optimisations - a6xx devfreq support - cursor support rockchip: - PX30 support - rgb output interface support mediatek: - HDMI output support on mt2701 and mt7623 rcar-du: - Interlaced modes on Gen3 - LVDS on R8A77980 - D3 and E3 SoC support hisilicon: - misc fixes mxsfb: - runtime pm support sun4i: - R40 TCON support - Allwinner A64 support - R40 HDMI support omapdrm: - Driver rework changing display pipeline ordering to use common code - DMM memory barrier and irq fixes - Errata workarounds exynos: - out-bridge support for LVDS bridge driver - Samsung 16x16 tiled format support - Plane alpha and pixel blend mode support tilcdc: - suspend/resume update mali-dp: - misc updates" * tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm: (1382 commits) firmware/dmc/icl: Add missing MODULE_FIRMWARE() for Icelake. drm/i915/icl: Fix signal_levels drm/i915/icl: Fix DDI/TC port clk_off bits drm/i915/icl: create function to identify combophy port drm/i915/gen9+: Fix initial readout for Y tiled framebuffers drm/i915: Large page offsets for pread/pwrite drm/i915/selftests: Disable shrinker across mmap-exhaustion drm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit panel's native mode drm/i915: Fix intel_dp_mst_best_encoder() drm/i915: Skip vcpi allocation for MSTB ports that are gone drm/i915: Don't unset intel_connector->mst_port drm/i915: Only reset seqno if actually idle drm/i915: Use the correct crtc when sanitizing plane mapping drm/i915: Restore vblank interrupts earlier drm/i915: Check fb stride against plane max stride drm/amdgpu/vcn:Fix uninitialized symbol error drm: panel-orientation-quirks: Add quirk for Acer One 10 (S1003) drm/amd/amdgpu: Fix debugfs error handling drm/amdgpu: Update gc_9_0 golden settings. drm/amd/powerplay: update PPtable with DC BTC and Tvr SocLimit fields ...
2018-10-07drm/msm: dpu: Fix memory leak caused by dropped referenceSean Paul1-3/+1
We are currently leaking a drm_crtc_commit struct for every atomic commit containing plane state. The dpu plane destroy function cleans up the fb reference manually, but fails to release the commit ref. As a result, we just keep allocating drm_crtc_commits without ever freeing them. Fortunately there's a helper function which will clean up all of our mess at once, so use that. Thanks to Doug Anderson for reporting the memory leak (and leaving breadcrumbs from kmemleak!). Reported-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-05treewide: Replace more open-coded allocation size multiplicationsKees Cook1-2/+2
As done treewide earlier, this catches several more open-coded allocation size calculations that were added to the kernel during the merge window. This performs the following mechanical transformations using Coccinelle: kvmalloc(a * b, ...) -> kvmalloc_array(a, b, ...) kvzalloc(a * b, ...) -> kvcalloc(a, b, ...) devm_kzalloc(..., a * b, ...) -> devm_kcalloc(..., a, b, ...) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-10-03drm/msm: fix unsigned comparison with less than zeroColin Ian King1-1/+1
The return from the call to _mixer_stages can be a negative error code however this is being assigned to an unsigned variable 'stages' hence the check is always false. Fix this by making 'stages' an int. Detected by Coccinelle ("Unsigned expression compared with zero: stages < 0") Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm: dpu: Don't reset dpu_enc->cur_master on .disable()Sean Paul1-2/+2
cur_master in dpu_encoder is assigned at modeset and cleared on .disable(). Unfortunately dpms (or enable/disable) does not guarantee a modeset, so cur_master is NULL when we try to re-enable it. This patch moves the NULL assignment to setup_display where it will be re-assigned later in the function. Tested-by: Bruce Wang <bzwang@chromium.org> Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: Revise _dpu_plane_get_aspaceBruce Wang1-29/+6
Remove unneeded checks from _dpu_plane_get_aspace. v3: change _dpu_plane_get_aspace to return a struct *msm_gem_address_space instead passing in a pointer of the same type to edit. Remove uneeded arguments. Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Bruce Wang <bzwang@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: Make dpu_plane_danger_signal_ctrl voidBruce Wang1-22/+4
Removed all impossible checks from the function, which eliminates the need for a return value. This function is also never used outside of dpu_plane.c, so the function is made static. v3: Using helper function _dpu_plane_get_kms() instead of doing it locally. Signed-off-by: Bruce Wang <bzwang@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: Change _dpu_crtc_vblank_enable_no_lock to voidBruce Wang1-35/+7
Removes redundant tests for _dpu_crtc_vblank_enable_no_lock. Function return type is now void and all function calls have been changed accordingly. Signed-off-by: Bruce Wang <bzwang@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: Remove _dpu_crtc_power_enableBruce Wang1-39/+2
All checks for _dpu_crtc_power_enable are not true, so the function can never return an error code. This removes the need for the function as pm_runtime functions can be used instead. v3: Separated _dpu_crtc_power_enable into _dpu_crtc_power_enable and _dpu_crtc_power_disable for clarity. v4: Removed both _dpu_crtc_power_enable and _dpu_crtc_power_disable and called pm_runtime_get_sync and pm_runtime_put_sync from all call points Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Bruce Wang <bzwang@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: Remove unneeded checks in dpu_crtc.cBruce Wang1-145/+22
Removes impossible checks in dpu_crtc.c. Variable assignments are moved up to be initializations where possible. Some variables are no longer used, these are removed. v3: reverted back to original patch Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Bruce Wang <bzwang@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: Clean up plane atomic disable/updateBruce Wang1-24/+7
Removes unnecessary checks from dpu_plane_atomic_disable, old_state argument for both dpu_plane_atomic_disable and dpu_plane_sspp_atomic_update is removed as it is no longer used. Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Bruce Wang <bzwang@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: Remove unneeded checks in dpu_plane.cBruce Wang1-188/+16
Removes some checks from dpu_plane.c that will never result in an error. Subsequent variable assignments become part of the initialization wherever possible. Unused variables are removed. v3: removed additional impossible checks and called helper function _dpu_plane_get_kms() where possible. Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Bruce Wang <bzwang@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm: dpu: Don't store/deref pointers in trace ringbufferSean Paul1-43/+55
TP_printk is not synchronous, so storing pointers and then later dereferencing them is a Bad Idea. This patch stores everything locally to avoid display stomped memory. Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> [seanpaul fixed up commit msg typo on apply] Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm: dpu: Add extra_flush_bits to trigger_flush traceSean Paul2-6/+11
It's useful to know which bits of the flush come from extra_flush_bits Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm: dpu: Clear frame_busy_mask bit after traceSean Paul1-1/+1
We're printing the frame_busy_mask in a trace, but after it's been cleared. This, as it turns out, is pretty pointless. Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm: dpu: Don't continue after error in atomic_checkSean Paul1-6/+6
There's no benefit in falling out of the if, just return directly. Changes in v2: - None Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm: dpu: Make dpu_plane_sspp_atomic_update() voidSean Paul1-57/+14
All of the checks in dpu_plane_sspp_atomic_update() are impossible, so remove them and make the function void. This removes the need to error check in dpu_plane_atomic_update(). Additionally, remove impossible checks in dpu_plane_atomic_update(). Changes in v2: - None Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm: dpu: Remove dpu_plane_enabled()Sean Paul1-7/+2
plane->state->visible encompasses all of these checks and more, so we can just check visible. Changes in v2: - None Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm: dpu: Remove dpu_plane_sspp_enabled()Sean Paul1-6/+1
It's doing the same thing dpu_plane_enabled() is. Changes in v2: - None Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm: dpu: Consolidate atomic_check functions()Sean Paul1-13/+2
dpu_plane_atomic_check() is a very thin wrapper around dpu_plane_sspp_atomic_check(). All it does is a NULL-check of state->fb, which is already done by drm_atomic_helper_check_plane_state(). Further, the helper sets state->visible = false when this is true. So remove dpu_plane_atomic_check() and just use dpu_plane_sspp_atomic_check() directly. Changes in v2: - Fix spelling mistake in Subject (Jeykumar) Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm: dpu: Move atomic_check_plane_state() call to atomic_checkSean Paul1-40/+17
src/dst rects are checked in both atomic_check and atomic_update, with the more comprehensive check occurring in atomic_update, which is backwards. So consolodate the checks in atomic_check. Changes in v2: - Use the correct crtc state (Jeykumar) Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm: dpu: Remove impossible checksSean Paul1-18/+1
This patch removes some checks which are impossible to hit. As a result, we can move some of the local var assignments into the declarations. Changes in v2: - None Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: Remove an unused enumJordan Crouse1-6/+0
enum dpu_ad isn't used and can be safely removed. Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: remove RM topology definitionJeykumar Sankaran7-124/+52
RM maintained a redundant definition for display topology to identify the no. of hw blocks needed for a display and their hardware dependencies. This information can be implicitly deduced from the msm_display_topology structure available in RM reserve request. In addition to getting rid of the redundant topology, this change also removes the topology name enums and their usages. changes in v4: - remove the topology name enum entirely (Sean) changes in v5: - remove RM topology definition and their references (Sean) - Implement helper for dual mixer CRTC (Sean) changes in v6: - avoid heap memory for topology (Sean) Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: relax parameter validation in encodersJeykumar Sankaran3-26/+0
DPU, being over protective, validates every parameter of a module. This change traces the call stack for some of encoder functions affected by previous set of clean up patches and cleans up unwanted validations. changes in v5: - Introduced in the series changes in v6: - none Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: remove RM dependency on connector stateJeykumar Sankaran7-71/+26
Connector states were passed around RM to update the custom topology connector property with chosen topology data. Now that we got rid of both custom properties and topology names, this change cleans up the mechanism to pass connector states across RM helpers and encoder functions. changes in v5: - Introduced in the series changes in v6: - remove parameter checking in rm reserve (Jordan) Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: remove display H_TILE from encoderJeykumar Sankaran3-9/+0
Encoder H_TILE values are not used for allocating the hw blocks. no. of hw_intf blocks provides the info. changes in v4: - remove irrelevant changes (Sean) - retain log macros (Sean) changes in v5: - none Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: remove LOCK/CLEAR support in RMJeykumar Sankaran2-39/+2
DPU had the support to LOCK the hw resources in atomic check and CLEAR the locked resources explicitly through custom property values. Now that DPU is stripped off of all the custom properties, the RM handlers for this feature will be no-op's. This change gets rid of all its references. changes in v5: - Introduced in the series. Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: remove cdm block support from resource managerJeykumar Sankaran13-639/+11
Support for CDM block is not present in DPU. Remove CDM handlers from resource manager. changes in v4: - Introduced in the series changes in v5: - Remove catalog references to CDM (Sean) Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: clean up destination scaler residueJeykumar Sankaran5-94/+7
Destination scaling(DS) is a Snapdragon hardware feature to scale up the display ROI after layer blending. DPU driver doesn't support programming of DS blocks yet. This change cleans up the residual code present in catalog and RM for DS block handling. Support for the same can be added back when the feature is formally implemented. changes in v5: - introduced in the series Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: rename hw_ctl to lm_ctlJeykumar Sankaran2-15/+15
Rename hw_ctl to lm_ctl to mean the ctl associated with the hw layer mixer block. sed -i 's/\([*@.>]\)hw_ctl\([^s]\)/\1lm_ctl\2/g' dpu_crtc.c dpu_crtc.h changes in v4: - Specifiy shell command used for renaming (Sean) changes in v5: - none Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: move hw resource tracking to crtc stateJeykumar Sankaran2-42/+39
Prep changes for state based resource management. Moves all the hw block tracking for the crtc to the state object. changes in v4: - Serialize crtc state access in debugfs handlers (Sean) - Split the crtc width query as a separate change (Sean) changes in v5: - mode set lock all before crtc state access (Sean) - remove unwanted memset for hw mixer cache (Sean) Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: make crtc get_mixer_width helper staticJeykumar Sankaran2-21/+9
Mark CRTC get_mixer_width helper API static as it is not used outside the file. changes in v4: - Patch introduced in the series changes in v5: - Simplify the inline function (Sean) Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: avoid querying for hw intf before assignmentJeykumar Sankaran1-37/+16
Resource manager assigns hw_intf blocks for the encoder only on modeset. If queried for hw_intf objects during init, it will be NULL. Since hw_intf objects are needed only after encoder enable, defer the query to encoder enable which will be triggered after modeset. changes in v4: - Add details on commit text on why the change is needed (Sean) changes in v5: - Reword commit text on the usage of hw_intf objects (Sean) Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: iterate for assigned hw ctl in virtual encoderJeykumar Sankaran3-41/+20
In virtual encoder modeset, DPU makes RM request to assign hw blocks for the display. It is also expected in modeset to iterate and associate the physical encoders with their relevant hw blocks. Ping pong blocks are already handled here but hw ctl blocks are not. This change moves the hw_ctl iteration and mapping from physical encoder to virtual encoder. changes in v4: - Fix hw_ctl initialization (Sean) changes in v5: - Update commit text with details on why the change is needed (Sean) Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: use kms stored hw mdp blockJeykumar Sankaran2-19/+2
Avoid querying RM for hw mdp block. Use the one stored in KMS during initialization. changes in v4: - none changes in v5: - none Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: enable master-slave encoders explicitlyJeykumar Sankaran1-31/+12
Identify slave-master encoders during initialization and enable the encoders explicitly as the current logic has redundant and ambiguous loops. changes in v4: - identify master/slave encoder while adding adding physical encoders(Sean) changes in v5: - get rid of temporary variable for phys enc(Sean) Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: remove ping pong split topology variablesJeykumar Sankaran1-3/+0
removes left out variables of previous ping pong split topology cleanup. changes in v4: - none changes in v5: - none Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: remove resource pool managerJeykumar Sankaran2-261/+0
resource pool manager utility was introduced to manage rotator sessions. Removing the support as the rotator feature doesn't exist. changes in v4: - none changes in v5: - none Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: remove scalar config definitionsJeykumar Sankaran2-12/+0
cleans up left out scalar config definitions from headers changes in v4: - none changes in v5: - none Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: squash power handle event typesJeykumar Sankaran4-50/+15
DPU power handler maintained PRE/POST versions of power ENABLE/DISABLE events to accommodate tasks which need be handled before/after data bus voting. But since the bus voting API's are deprecated and removed from the driver, squash the events and their clients respective event handlers to handle only ENABLE/DISABLE events. changes in v5: - introduced in the series Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> [seanpaul converted #defines to BIT(x) in dpu_power_handle.h] Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: remove debugfs support for misrJeykumar Sankaran11-387/+0
MISR support is the debug feature present in Snapdragon chipsets. At the layer mixer and interfaces, MISR algorithm can generate CRC signatures of the pixel data which can be used for validating the frames generated. Since there are no clients for this feature, strip down the support from the driver. changes in v4: - changed introduced in the series changes in v5: - update commit text with the need for the change(Sean) Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: Remove dpu_mdss_isr when dpu_mdss_destroy is calledJordan Crouse1-1/+3
The MDSS device is created before the MSM driver attempts to bind the sub components. If any of the components return -EPROBE_DEFER the MDSS device is destroyed and tried again later. If this happens the dpu_mdss_isr interrupt created from the DPU MDSS is not freed when the MDSS device is destroyed and has a risk of triggering later and hitting a fault by accessing a mmio region that no longer exists. Even if the interrupt isn't triggered by accident when the device attempts to reprobe it would error out when it tries to re-register the interrupt so unconditionally removing it in the destroy is the right move. Switch the device managed dpu_mdss_isr to be unmanaged and add a free_irq() in the mdss destroy function. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm: dpu: Allow planes to extend past active displaySean Paul2-15/+22
The atomic_check is a bit too aggressive with respect to planes which leave the active area. This caused a bunch of log spew when the cursor got to the edge of the screen and stopped it from going all the way. This patch removes the conservative bounds checks from atomic and clips the dst rect such that we properly display planes which go off the screen. Changes in v2: - Apply the clip to src as well (taking into account scaling) Changes in v3: - Use drm_atomic_helper_check_plane_state() to clip src/dst Cc: Sravanthi Kollukuduru <skolluku@codeaurora.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: use encoder type to identify display typeJeykumar Sankaran1-4/+4
With patch [1], DPU is broken since it continues to use incorrect connector_type to identify the display type. Update DPU to use the encoder type to get the info. [1] https://patchwork.kernel.org/patch/10568269/ Acked-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: remove unwanted encoder type mappingJeykumar Sankaran1-14/+6
This change gets rid of unwanted connector-encoder type mapping used for dsi-staging driver. Now that DPU will be using upstream DSI driver, remove the stale code. Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-10-03drm/msm/dpu: remove stale display port programmingJeykumar Sankaran1-6/+0
Remove stale display port programming. It can be added back with DPU support for display port. Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-27 23:01:20 +0000