| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
intel_psr2_config_valid() fails
If any of the PSR2 checks after intel_psr2_sel_fetch_config_valid()
fails, enable_psr2_sel_fetch will be kept enabled causing problems
in the functions that only checks for it and not for has_psr2.
So here moving the check that do not depend on enable_psr2_sel_fetch
and for the remaning ones jumping to a section that unset
enable_psr2_sel_fetch in case of failure to support PSR2.
Fixes: 6e43e276b8c9 ("drm/i915: Initial implementation of PSR2 selective fetch")
Cc: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414151118.21980-1-jose.souza@intel.com
(cherry picked from commit 554ae8dce1268789e72767a67f0635cb743b3cea)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
With some VRR panels, user can turn VRR ON/OFF on the fly from the panel settings.
When VRR is turned OFF ,sends a long HPD to the driver clearing the Ignore MSA bit
in the DPCD. Currently the driver parses that onevery HPD but fails to reset
the corresponding VRR Capable Connector property.
Hence the userspace still sees this as VRR Capable panel which is incorrect.
Fix this by explicitly resetting the connector property.
v2: Reset vrr capable if status == connector_disconnected
v3: Use i915 and use bool vrr_capable (Jani Nikula)
v4: Move vrr_capable to after update modes call (Jani N)
Remove the redundant comment (Jan N)
v5: Fixes the regression on older platforms by resetting the VRR
only if HAS_VRR
v6: Remove the checks from driver, add in drm core before
setting VRR prop (Ville)
v7: Move VRR set/reset to set/unset_edid (Ville)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 9bc34b4d0f3c ("drm/i915/display/vrr: Reset VRR capable property on a long hpd")
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303233222.4698-1-manasi.d.navare@intel.com
(cherry picked from commit d999ad1079f574be06a8f1701cd24a5dc0ada48c)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
The intent of the version check in the mmap ioctl was to maintain
support for existing platforms (i.e., ADL/RPL and earlier), but drop
support on all future igpu platforms. As we've seen on the dgpu side,
the hardware teams are using a more fine-grained numbering system for IP
version numbers these days, so it's possible the version number
associated with our next igpu could be some form of "12.xx" rather than
13 or higher. Comparing against the full ver.release number will ensure
the intent of the check is maintained no matter what numbering the
hardware teams settle on.
Fixes: d3f3baa3562a ("drm/i915: Reinstate the mmap ioctl for some platforms")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407161839.1073443-1-matthew.d.roper@intel.com
(cherry picked from commit 8e7e5c077cd57ee9a36d58c65f07257dc49a88d5)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Pull drm fixes from Dave Airlie:
"Some fixes were queued up in and in light of the fbdev regressions,
I've pulled those in as well.
core:
- Make audio and color plane support checking only happen when a CEA
extension block is found.
- Small selftest fix.
fbdev:
- two regressions fixes from speedup patches.
ttm:
- Fix a small regression from ttm_resource_fini()
i915:
- Reject unsupported TMDS rates on ICL+
- Treat SAGV block time 0 as SAGV disabled
- Fix PSF GV point mask when SAGV is not possible
- Fix renamed INTEL_INFO->media.arch/ver field"
* tag 'drm-next-2022-03-25' of git://anongit.freedesktop.org/drm/drm:
fbdev: Fix cfb_imageblit() for arbitrary image widths
fbdev: Fix sys_imageblit() for arbitrary image widths
drm/edid: fix CEA extension byte #3 parsing
drm/edid: check basic audio support on CEA extension block
drm/i915: Fix renamed struct field
drm/i915: Fix PSF GV point mask when SAGV is not possible
drm/i915: Treat SAGV block time 0 as SAGV disabled
drm/i915: Reject unsupported TMDS rates on ICL+
drm/selftest: plane_helper: Put test structures in static storage
drm/ttm: Fix a kernel oops due to an invalid read
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild update for C11 language base from Masahiro Yamada:
"Kbuild -std=gnu11 updates for v5.18
Linus pointed out the benefits of C99 some years ago, especially
variable declarations in loops [1]. At that time, we were not ready
for the migration due to old compilers.
Recently, Jakob Koschel reported a bug in list_for_each_entry(), which
leaks the invalid pointer out of the loop [2]. In the discussion, we
agreed that the time had come. Now that GCC 5.1 is the minimum
compiler version, there is nothing to prevent us from going to
-std=gnu99, or even straight to -std=gnu11.
Discussions for a better list iterator implementation are ongoing, but
this patch set must land first"
[1] https://lore.kernel.org/all/CAHk-=wgr12JkKmRd21qh-se-_Gs69kbPgR9x4C+Es-yJV2GLkA@mail.gmail.com/
[2] https://lore.kernel.org/lkml/86C4CE7D-6D93-456B-AA82-F8ADEACA40B7@gmail.com/
* tag 'kbuild-gnu11-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Kbuild: use -std=gnu11 for KBUILD_USERCFLAGS
Kbuild: move to -std=gnu11
Kbuild: use -Wdeclaration-after-statement
Kbuild: add -Wno-shift-negative-value where -Wextra is used
|
|
Pull drm updates from Dave Airlie:
"Lots of work all over, Intel improving DG2 support, amdkfd CRIU
support, msm new hw support, and faster fbdev support.
dma-buf:
- rename dma-buf-map to iosys-map
core:
- move buddy allocator to core
- add pci/platform init macros
- improve EDID parser deep color handling
- EDID timing type 7 support
- add GPD Win Max quirk
- add yes/no helpers to string_helpers
- flatten syncobj chains
- add nomodeset support to lots of drivers
- improve fb-helper clipping support
- add default property value interface
fbdev:
- improve fbdev ops speed
ttm:
- add a backpointer from ttm bo->ttm resource
dp:
- move displayport headers
- add a dp helper module
bridge:
- anx7625 atomic support, HDCP support
panel:
- split out panel-lvds and lvds bindings
- find panels in OF subnodes
privacy:
- add chromeos privacy screen support
fb:
- hot unplug fw fb on forced removal
simpledrm:
- request region instead of marking ioresource busy
- add panel oreintation property
udmabuf:
- fix oops with 0 pages
amdgpu:
- power management code cleanup
- Enable freesync video mode by default
- RAS code cleanup
- Improve VRAM access for debug using SDMA
- SR-IOV rework special register access and fixes
- profiling power state request ioctl
- expose IP discovery via sysfs
- Cyan skillfish updates
- GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates
- expose benchmark tests via debugfs
- add module param to disable XGMI for testing
- GPU reset debugfs register dumping support
amdkfd:
- CRIU support
- SDMA queue fixes
radeon:
- UVD suspend fix
- iMac backlight fix
i915:
- minimal parallel submission for execlists
- DG2-G12 subplatform added
- DG2 programming workarounds
- DG2 accelerated migration support
- flat CCS and CCS engine support for XeHP
- initial small BAR support
- drop fake LMEM support
- ADL-N PCH support
- bigjoiner updates
- introduce VMA resources and async unbinding
- register definitions cleanups
- multi-FBC refactoring
- DG1 OPROM over SPI support
- ADL-N platform enabling
- opregion mailbox #5 support
- DP MST ESI improvements
- drm device based logging
- async flip optimisation for DG2
- CPU arch abstraction fixes
- improve GuC ADS init to work on aarch64
- tweak TTM LRU priority hint
- GuC 69.0.3 support
- remove short term execbuf pins
nouveau:
- higher DP/eDP bitrates
- backlight fixes
msm:
- dpu + dp support for sc8180x
- dp support for sm8350
- dpu + dsi support for qcm2290
- 10nm dsi phy tuning support
- bridge support for dp encoder
- gpu support for additional 7c3 SKUs
ingenic:
- HDMI support for JZ4780
- aux channel EDID support
ast:
- AST2600 support
- add wide screen support
- create DP/DVI connectors
omapdrm:
- fix implicit dma_buf fencing
vc4:
- add CSC + full range support
- better display firmware handoff
panfrost:
- add initial dual-core GPU support
stm:
- new revision support
- fb handover support
mediatek:
- transfer display binding document to yaml format.
- add mt8195 display device binding.
- allow commands to be sent during video mode.
- add wait_for_event for crtc disable by cmdq.
tegra:
- YUV format support
rcar-du:
- LVDS support for M3-W+ (R8A77961)
exynos:
- BGR pixel format for FIMD device"
* tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm: (1529 commits)
drm/i915/display: Do not re-enable PSR after it was marked as not reliable
drm/i915/display: Fix HPD short pulse handling for eDP
drm/amdgpu: Use drm_mode_copy()
drm/radeon: Use drm_mode_copy()
drm/amdgpu: Use ternary operator in `vcn_v1_0_start()`
drm/amdgpu: Remove pointless on stack mode copies
drm/amd/pm: fix indenting in __smu_cmn_reg_print_error()
drm/amdgpu/dc: fix typos in comments
drm/amdgpu: fix typos in comments
drm/amd/pm: fix typos in comments
drm/amdgpu: Add stolen reserved memory for MI25 SRIOV.
drm/amdgpu: Merge get_reserved_allocation to get_vbios_allocations.
drm/amdkfd: evict svm bo worker handle error
drm/amdgpu/vcn: fix vcn ring test failure in igt reload test
drm/amdgpu: only allow secure submission on rings which support that
drm/amdgpu: fixed the warnings reported by kernel test robot
drm/amd/display: 3.2.177
drm/amd/display: [FW Promotion] Release 0.0.108.0
drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2
drm/amd/display: Wait for hubp read line for Pollock
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull flexible-array transformations from Gustavo Silva:
"Treewide patch that replaces zero-length arrays with flexible-array
members.
This has been baking in linux-next for a whole development cycle"
* tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
treewide: Replace zero-length arrays with flexible-array members
|
|
Earlier versions of commit a5b7ef27da60 ("drm/i915: Add struct to hold
IP version") named "ver" as "arch" and then when it was renamed it
missed the rename on MEDIA_VER_FULL() since it it's currently not used.
Fixes: a5b7ef27da60 ("drm/i915: Add struct to hold IP version")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220316234538.434357-1-lucas.demarchi@intel.com
(cherry picked from commit b4ac33b973233dc08a56c8ef9d3c2edeab7a4370)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
Don't just mask off all the PSF GV points when SAGV gets disabled.
This should in fact cause the Pcode to reject the request since
at least one PSF point must remain enabled at all times.
Cc: stable@vger.kernel.org
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: 192fbfb76744 ("drm/i915: Implement PSF GV point support")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220309164948.10671-7-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit 0fed4ddd18f064d2359b430c6e83ee60dd1f49b1)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
For modern platforms the spec explicitly states that a
SAGV block time of zero means that SAGV is not supported.
Let's extend that to all platforms. Supposedly there should
be no systems where this isn't true, and it'll allow us to:
- use the same code regardless of older vs. newer platform
- wm latencies already treat 0 as disabled, so this fits well
with other related code
- make it a bit more clear when SAGV is used vs. not
- avoid overflows from adding U32_MAX with a u16 wm0 latency value
which could cause us to miscalculate the SAGV watermarks on tgl+
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220309164948.10671-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit d8f5855b31c0523ea3b171db8dfb998830e8735d)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
ICL+ PLLs can't genenerate certain frequencies. Running the PLL
algorithms through for all frequencies 25-594MHz we see a gap just
above 500 MHz. Specifically 500-522.8MHZ for TC PLLs, and 500-533.2
MHz for combo PHY PLLs. Reject those frequencies hdmi_port_clock_valid()
so that we properly filter out unsupported modes and/or color depths
for HDMI.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5247
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311212845.32358-1-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
(cherry picked from commit e5086cb3f3d3f94091be29eec38cf13f8a75a778)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
If a error happens and sink_not_reliable is set, PSR should be disabled
for good but that is not happening.
It would be disabled by the function handling the PSR error but then
on the next fastset it would be enabled again in
_intel_psr_post_plane_update().
It would only be disabled for good in the next modeset where has_psr
will be set false.
v2:
- release psr lock before continue
Fixes: 9ce5884e5139 ("drm/i915/display: Only keep PSR enabled if there is active planes")
Reported-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reported-by: Charlton Lin <charlton.lin@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311185149.110527-2-jose.souza@intel.com
(cherry picked from commit 15f26bdc81f7f03561aaea5a10d87bd6638e1459)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Commit 13ea6db2cf24 ("drm/i915/edp: Ignore short pulse when panel
powered off") completely broke short pulse handling for eDP as it is
usually generated by sink when it is displaying image and there is
some error or status that source needs to handle.
When power panel is enabled, this state is enough to power aux
transactions and VDD override is disabled, so intel_pps_have_power()
is always returning false causing short pulses to be ignored.
So here better naming this function that intends to check if aux
lines are powered to avoid the endless cycle mentioned in the commit
being fixed and fixing the check for what it is intended.
v2:
- renamed to intel_pps_have_panel_power_or_vdd()
- fixed indentation
Fixes: 13ea6db2cf24 ("drm/i915/edp: Ignore short pulse when panel powered off")
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311185149.110527-1-jose.souza@intel.com
(cherry picked from commit 8f0c1c0949b609acfad62b8d5f742a3b5e7b05ab)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
A missing bounds check in vm_access() can lead to an out-of-bounds read
or write in the adjacent memory area, since the len attribute is not
validated before the memcpy later in the function, potentially hitting:
[ 183.637831] BUG: unable to handle page fault for address: ffffc90000c86000
[ 183.637934] #PF: supervisor read access in kernel mode
[ 183.637997] #PF: error_code(0x0000) - not-present page
[ 183.638059] PGD 100000067 P4D 100000067 PUD 100258067 PMD 106341067 PTE 0
[ 183.638144] Oops: 0000 [#2] PREEMPT SMP NOPTI
[ 183.638201] CPU: 3 PID: 1790 Comm: poc Tainted: G D 5.17.0-rc6-ci-drm-11296+ #1
[ 183.638298] Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake H DDR4 RVP, BIOS CNLSFWR1.R00.X208.B00.1905301319 05/30/2019
[ 183.638430] RIP: 0010:memcpy_erms+0x6/0x10
[ 183.640213] RSP: 0018:ffffc90001763d48 EFLAGS: 00010246
[ 183.641117] RAX: ffff888109c14000 RBX: ffff888111bece40 RCX: 0000000000000ffc
[ 183.642029] RDX: 0000000000001000 RSI: ffffc90000c86000 RDI: ffff888109c14004
[ 183.642946] RBP: 0000000000000ffc R08: 800000000000016b R09: 0000000000000000
[ 183.643848] R10: ffffc90000c85000 R11: 0000000000000048 R12: 0000000000001000
[ 183.644742] R13: ffff888111bed190 R14: ffff888109c14000 R15: 0000000000001000
[ 183.645653] FS: 00007fe5ef807540(0000) GS:ffff88845b380000(0000) knlGS:0000000000000000
[ 183.646570] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 183.647481] CR2: ffffc90000c86000 CR3: 000000010ff02006 CR4: 00000000003706e0
[ 183.648384] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 183.649271] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 183.650142] Call Trace:
[ 183.650988] <TASK>
[ 183.651793] vm_access+0x1f0/0x2a0 [i915]
[ 183.652726] __access_remote_vm+0x224/0x380
[ 183.653561] mem_rw.isra.0+0xf9/0x190
[ 183.654402] vfs_read+0x9d/0x1b0
[ 183.655238] ksys_read+0x63/0xe0
[ 183.656065] do_syscall_64+0x38/0xc0
[ 183.656882] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 183.657663] RIP: 0033:0x7fe5ef725142
[ 183.659351] RSP: 002b:00007ffe1e81c7e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[ 183.660227] RAX: ffffffffffffffda RBX: 0000557055dfb780 RCX: 00007fe5ef725142
[ 183.661104] RDX: 0000000000001000 RSI: 00007ffe1e81d880 RDI: 0000000000000005
[ 183.661972] RBP: 00007ffe1e81e890 R08: 0000000000000030 R09: 0000000000000046
[ 183.662832] R10: 0000557055dfc2e0 R11: 0000000000000246 R12: 0000557055dfb1c0
[ 183.663691] R13: 00007ffe1e81e980 R14: 0000000000000000 R15: 0000000000000000
Changes since v1:
- Updated if condition with range_overflows_t [Chris Wilson]
Fixes: 9f909e215fea ("drm/i915: Implement vm_ops->access for gdb access into mmaps")
Signed-off-by: Mastan Katragadda <mastanx.katragadda@intel.com>
Suggested-by: Adam Zabrocki <adamza@microsoft.com>
Reported-by: Jackson Cody <cody.jackson@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
[mauld: tidy up the commit message and add Cc: stable]
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303060428.1668844-1-mastanx.katragadda@intel.com
(cherry picked from commit 661412e301e2ca86799aa4f400d1cf0bd38c57c6)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
As a preparation for moving to -std=gnu11, turn off the
-Wshift-negative-value option. This warning is enabled by gcc when
building with -Wextra for c99 or higher, but not for c89. Since
the kernel already relies on well-defined overflow behavior,
the warning is not helpful and can simply be disabled in
all locations that use -Wextra.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 (x86-64)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Currently this will enforce both 2M alignment and padding for any LMEM
pages inserted into the GGTT. However, this was only meant to be applied
to the compact-pt layout with the ppGTT. For the GGTT we can reduce the
alignment and padding to 64K.
Bspec: 45015
Fixes: 87bd701ee268 ("drm/i915: enforce min GTT alignment for discrete cards")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Robert Beckett <bob.beckett@collabora.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303100229.839282-1-matthew.auld@intel.com
(cherry picked from commit c64fa77dd4609cb8cd53fbb73b02434ae8212c7a)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
drm-intel-next-fixes
- add the missing attribute "name" in VFIO mdev hierarchy.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: "Wang, Zhi A" <zhi.a.wang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e38f0725-6b22-8e49-b8f6-41986b0ece06@intel.com
|
|
The current implementation of the async flip wm0/ddb optimization
does not work at all. The biggest problem is that we skip the
whole intel_pipe_update_{start,end}() dance and thus never actually
complete the commit that is trying to do the wm/ddb change.
To fix this we need to move the do_async_flip flag to the crtc
state since we handle commits per-pipe, not per-plane.
Also since all planes can now be included in the first/last
"async flip" (which gets converted to a sync flip to do the
wm/ddb mangling) we need to be more careful when checking if
the plane state is async flip comptatible. Only planes doing
the async flip should be checked and other planes are perfectly
fine not adhereing to any async flip related limitations.
However for subsequent commits which are actually going do the
async flip in hardware we want to make sure no other planes
are in the state. That should never happen assuming we did our
job correctly, so we'll toss in a WARN to make sure we catch
any bugs here.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: c3639f3be480 ("drm/i915: Use wm0 only during async flips for DG2")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214105532.13049-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit 2e08437160d1e8f2cd3f0d56d59e74423602116e)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Since the async flip state check is done very late and
thus it can see potentially all the planes in the state
(due to the wm/ddb optimization) we need to move the
"can the requested plane do async flips at all?" check
much earlier. For this purpose we introduce
intel_async_flip_check_uapi() that gets called early during
the atomic check.
And for good measure we'll throw in a couple of basic checks:
- is the crtc active?
- was a modeset flagged?
- is+was the plane enabled?
Though atm all of those should be guaranteed by the fact
that the async flip can only be requested through the legacy
page flip ioctl.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: c3639f3be480 ("drm/i915: Use wm0 only during async flips for DG2")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214105532.13049-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit b0b2bed2a1305c8f977c6b7d5fa162773693a212)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
data_rate==0 no longer means a plane is disabled, it could
also mean we want to use the minimum ddb allocation for it.
Hence we can't bail out early during ddb allocation or
else we'll simply forget to allocate any ddb for such planes.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: 6a4d8cc6bbbf ("drm/i915: Don't allocate extra ddb during async flip for DG2")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214105532.13049-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit 6475e106821babc0dc478a9cb3fc3973739c43fb)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
bigjoiner_pipes==0 leads bigjoiner_master_pipe() to
do BIT(ffs(0)-1) which is undefined behaviour. The code should
actually still work fine since the only place we provoke
that is intel_crtc_bigjoiner_slave_pipes() and it'll bitwise
AND the result with 0, so doesn't really matter what we get
out of bigjoiner_master_pipe(). But best not provoke undefined
behaviour anyway.
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: a6e7a006f5d5 ("drm/i915: Change bigjoiner state tracking to use the pipe bitmask")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223131315.18016-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
(cherry picked from commit cccc71b552a1040ad3d738d7ec95570801fb0bf6)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
The mdev attribute "name" is required by some middle software, e.g.
KubeVirt, an open source SW that manages VM on Kubernetes cluster uses
the mdev sysfs directory/file structure to discover mediated device in
nodes in the cluster.
v2:
- Fix the missing defination in gvt_type_attrs. (Zhenyu)
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Hui Chun Ong <hui.chun.ong@intel.com>
Cc: Terrence Xu <terrence.xu@intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhi Wang <zhi.wang.linux@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220222150532.9090-1-zhi.a.wang@intel.com
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Currently we are observing occasional screen flickering when
PSR2 selective fetch is enabled. More specifically glitch seems
to happen on full frame update when cursor moves to coords
x = -1 or y = -1.
According to Bspec SF Single full frame should not be set if
SF Partial Frame Enable is not set. This happened to be true for
ADLP as PSR2_MAN_TRK_CTL_ENABLE is always set and for ADL_P it's
actually "SF Partial Frame Enable" (Bit 31).
Setting "SF Partial Frame Enable" bit also on full update seems to
fix screen flickering.
Also make code more clear by setting PSR2_MAN_TRK_CTL_ENABLE
only if not on ADL_P. Bit 31 has different meaning in ADL_P.
Bspec: 49274
v2: Fix Mihai Harpau email address
v3: Modify commit message and remove unnecessary comment
Tested-by: Lyude Paul <lyude@redhat.com>
Fixes: 7f6002e58025 ("drm/i915/display: Enable PSR2 selective fetch by default")
Reported-by: Lyude Paul <lyude@redhat.com>
Cc: Mihai Harpau <mharpau@gmail.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/5077
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225070228.855138-1-jouni.hogander@intel.com
(cherry picked from commit 8d5516d18b323cf7274d1cf5fe76f4a691f879c6)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
Cross-subsystem Changes:
- drm-next backmerge for buddy allocator changes
Driver Changes:
- Skip i915_perf init for DG2 as it is not yet enabled (Ram)
- Add missing workarounds for DG2 (Clint)
- Add 64K page/align support for platforms like DG2 that require it (Matt A, Ram, Bob)
- Add accelerated migration support for DG2 (Matt A)
- Add flat CCS support for XeHP SDV (Abdiel, Ram)
- Add Compute Command Streamer (CCS) engine support for XeHP SDV (Michel,
Daniele, Aravind, Matt R)
- Don't support parallel submission on compute / render (Matt B, Matt R)
- Disable i915 build on PREEMPT_RT until RT behaviour fixed (Sebastian)
- Remove RPS interrupt support for TGL+ (Jose)
- Fix S/R with PM_EARLY for non-GTT mappable objects on DG2 (Matt, Lucas)
- Skip stolen memory init if it is fully reserved (Jose)
- Use iosys_map for GuC data structures that may be in LMEM BAR or SMEM (Lucas)
- Do not complain about stale GuC reset notifications for banned contexts (John)
- Move context descriptor fields to intel_lrc.h
- Start adding support for small BAR (Matt A)
- Clarify vma lifetime (Thomas)
- Simplify subplatform detection on TGL (Jose)
- Correct the param count for unset GuC SLPC param (Vinay, Umesh)
- Read RP_STATE_CAP correctly on Gen12 with GuC SLPC (Vinay)
- Initialize GuC submission locks and queues early (Daniele)
- Fix GuC flag query helper function to not modify state (John)
- Drop fake lmem support now we have real hardware available (Lucas)
- Move misplaced W/A to their correct locations (Srinivasan)
- Use get_reset_domain() helper (Tejas)
- Move context descriptor fields to intel_lrc.h (Matt R)
- Selftest improvements (Matt A)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YiBzY1dM7bKwMQ3H@jlahtine-mobl.ger.corp.intel.com
|
|
Registers that exist in the shared render/compute reset domain need to
be placed on an engine workaround list to ensure that they are properly
re-applied whenever an RCS or CCS engine is reset. We have a number of
workarounds (updating registers MLTICTXCTL, L3SQCREG1_CCS0,
GEN12_MERT_MOD_CTRL, and GEN12_GAMCNTRL_CTRL) that are incorrectly
implemented on the 'gt' workaround list and need to be moved
accordingly.
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.s@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-14-matthew.d.roper@intel.com
|
|
Additional workarounds are required once we start exposing CCS engines.
Note that we have a number of workarounds that update registers in the
shared render/compute reset domain. Historically we've just added such
registers to the RCS engine's workaround list. But going forward we
should be more careful to place such workarounds on a wa_list for an
engine that definitely exists and is not fused off (e.g., a platform
with no RCS would never apply the RCS wa_list). We'll keep
rcs_engine_wa_init() focused on RCS-specific workarounds that only need
to be applied if the RCS engine is present. A separate
general_render_compute_wa_init() function will be used to define
workarounds that touch registers in the shared render/compute reset
domain and that we need to apply regardless of what render and/or
compute engines actually exist. Any workarounds defined in this new
function will internally be added to the first present RCS or CCS
engine's workaround list to ensure they get applied (and only get
applied once rather than being needlessly re-applied several times).
Co-author: Srinivasan Shanmugam
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-13-matthew.d.roper@intel.com
|
|
HW resources are divided across the active CCS engines at the compute
slice level, with each CCS having priority on one of the cslices.
If a compute slice has no enabled DSS, its paired compute engine is not
usable in full parallel execution because the other ones already fully
saturate the HW, so consider it fused off.
v2 (José):
- moved it to its own function
- fixed definition of ccs_mask
v3 (Matt):
- Replace fls() condition with a simple IP version test
v4 (Matt):
- Don't try to calculate a ccs_mask using
intel_slicemask_from_dssmask() until we've determined that we're
running on an Xe_HP platform where the logic makes sense (and won't
overflow).
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302052008.1884985-1-matthew.d.roper@intel.com
|
|
A different emit breadcrumbs ring programming is required for compute /
render and we don't have UMD user so just reject parallel submission for
these engine classes.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-11-matthew.d.roper@intel.com
|
|
Tell GuC that CCS is enabled by setting the CCS mask in its ADS.
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Original-author: Michel Thierry
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-10-matthew.d.roper@intel.com
|
|
We have to specify in the Render Control Unit Mode register
when CCS is enabled.
v2:
- Move RCU_MODE programming to a helper function. (Tvrtko)
- Clean up and clarify comments. (Tvrtko)
- Add RCU_MODE to the GuC save/restore list. (Daniele)
v3:
- Move this patch before the GuC ADS update to enable compute engines;
the definition of RCU_MODE and its insertion into the save/restore
list moves to this patch. (Daniele)
v4:
- Call xehp_enable_ccs_engines() directly in guc_resume() and
execlists_resume() rather than adding an extra layer of wrapping to
the engine->resume() vfunc. (Umesh)
Bspec: 46034
Original-author: Michel Thierry
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302001554.1836066-1-matthew.d.roper@intel.com
|
|
In Dual Context mode the EUs are shared between render and compute
command streamers. The hardware provides a field in the lrc descriptor
to indicate the prioritization of the thread dispatch associated to the
corresponding context.
The context priority is set to 'low' at creation time and relies on the
existing context priority to set it to low/normal/high.
Bspec: 46145, 46260
Original-author: Michel Thierry
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Prasad Nallani <prasad.nallani@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-8-matthew.d.roper@intel.com
|
|
This is a more appropriate header for these definitions.
v2:
- Cleanup whitespace. (Lucas)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-7-matthew.d.roper@intel.com
|
|
The compute engine handles the same commands the render engine can
(except 3D pipeline), so it makes sense that CCS is more similar to RCS
than non-render engines.
The CCS context state (lrc) is also similar to the render one, so reuse
it. Note that the compute engine has its own CTX_R_PWR_CLK_STATE
register.
In order to avoid having multiple RCS && CCS checks, add the following
engine flag:
- I915_ENGINE_HAS_RCS_REG_STATE - use the render (larger) reg state ctx.
BSpec: 46260
Original-author: Michel Thierry
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-6-matthew.d.roper@intel.com
|
|
CCS will reuse the RCS functions for breadcrumb and flush emission.
However, CCS pipe_control has additional programming restrictions:
- Command Streamer Stall Enable must be always set
- Post Sync Operations must not be set to Write PS Depth Count
- 3D-related bits must not be set
v2:
- Drop unwanted blank line. (Lucas)
Bspec: 47112
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-5-matthew.d.roper@intel.com
|
|
Add execlists and GuC interrupts for compute CS into existing IRQ handlers.
All compute command streamers belong to the same compute class, so the
only change needed to enable their interrupts is to program their GT engine
interrupt mask registers.
CCS0 shares the register with CCS1, while CCS2 and CCS3 are in a new one.
BSpec: 50844, 54029, 54030, 53223, 53224.
Original-author: Michel Thierry
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-4-matthew.d.roper@intel.com
|
|
The reset domain is shared between render and all compute engines,
so resetting one will affect the others.
Note: Before performing a reset on an RCS or CCS engine, the GuC will
attempt to preempt-to-idle the other non-hung RCS/CCS engines to avoid
impacting other clients (since some shared modules will be reset). If
other engines are executing non-preemptable workloads, the impact is
unavoidable and some work may be lost.
Bspec: 52549
Original-author: Michel Thierry
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-3-matthew.d.roper@intel.com
|
|
Introduce a Compute Command Streamer (CCS), which has access to
the media and GPGPU pipelines (but not the 3D pipeline).
To begin with, define the compute class/engine common functions, based
on the existing render ones.
v2:
- Add kerneldoc for drm_i915_gem_engine_class since we're adding a new
element to it. (Daniel)
- Make engine class <-> guc class converters use lookup tables to make
it more clear/explicit how the IDs map. (Tvrtko)
v3:
- Don't update uapi for now; we'll just include the driver-internal
changes for the time being.
Bspec: 46167, 45544
Original-author: Michel Thierry
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-2-matthew.d.roper@intel.com
|
|
There are a few sections in the driver which are not compatible with
PREEMPT_RT. They trigger warnings and can lead to deadlocks at runtime.
Disable the i915 driver on a PREEMPT_RT enabled kernel. This way
PREEMPT_RT itself can be enabled without needing to address the i915
issues first. The RT related patches are still in RT queue and will be
handled later.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YgqmfKhwU5spS069@linutronix.de
|
|
It is possible for reset notifications to arrive for a context that is
in the process of being banned. So don't flag these as an error, just
report it as informational (because it is still useful to know that
resets are happening even if they are being ignored).
v2: Better wording for the message (review feedback from Tvrtko).
v3: Fix rebase issue (review feedback from Daniele).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225015232.1939497-1-John.C.Harrison@Intel.com
|
|
Move initialization of submission-related spinlock, lists and workers to
init_early. This fixes an issue where if the GuC init fails we might
still try to get the lock in the context cleanup code. Note that it is
safe to call the GuC context cleanup code even if the init failed
because all contexts are initialized with an invalid GuC ID, which will
cause the GuC side of the cleanup to be skipped, so it is easier to just
make sure the variables are initialized than to special case the cleanup
to handle the case when they're not.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/4932
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215011123.734572-1-daniele.ceraolospurio@intel.com
|
|
A flag query helper was actually writing to the flags word rather than
just reading. Fix that. Also update the function's comment as it was
out of date.
NB: No need for a 'Fixes' tag. The test was only ever used inside a
BUG_ON during context registration. Rather than asserting that the
condition was true, it was making the condition true. So, in theory,
there was no consequence because we should never have hit a BUG_ON
anyway. Which means the write should always have been a no-op.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217212942.629922-1-John.C.Harrison@Intel.com
|
|
Exercise each of the migration scenarios, verifying that the final
placement and buffer contents match our expectations.
v2(Thomas): Replace for_i915_gem_ww() block with simpler object_lock()
v3:
- For testing purposes allow forcing the io_size such that we can
exercise the allocation + migration path on devices that don't have the
small BAR limit.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220228123607.580432-4-matthew.auld@intel.com
|
|
If we have to contend with non-mappable LMEM, then we need to ensure the
object fits within the mappable portion, like in the selftests, where we
later try to CPU access the pages. However if it can't then we need to
gracefully handle this, without throwing an error.
Also it looks like TTM will return -ENOMEM, in ttm_bo_mem_space() after
exhausting all possible placements.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220228123607.580432-3-matthew.auld@intel.com
|
|
The end goal is to have userspace tell the kernel what buffers will
require CPU access, however if we ever reach the CPU fault handler, and
the current resource is not mappable, then we should attempt to migrate
the buffer to the mappable portion of LMEM, or even system memory, if the
allowable placements permit it.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220228123607.580432-2-matthew.auld@intel.com
|
|
If we need to make room for some mappable object, then we should
only victimize objects that have one or pages that occupy the visible
portion of LMEM. Let's also create a new priority hint for objects that
are placed in mappable memory, where we know that CPU access was
requested, that way we hopefully victimize these last.
v2(Thomas): s/TTM_PL_PRIV/I915_PL_LMEM0/
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220228123607.580432-1-matthew.auld@intel.com
|
|
It's unclear what reference the initial vma kref reference refers to.
A vma can have multiple weak references, the object vma list,
the vm's bound list and the GT's closed_list, and the initial vma
reference can be put from lookups of all these lists.
With the current implementation this means
that any holder of yet another vma refcount (currently only
i915_gem_object_unbind()) needs to be holding two of either
*) An object refcount,
*) A vm open count
*) A vma open count
in order for us to not risk leaking a reference by having the
initial vma reference being put twice.
Address this by re-introducing i915_vma_destroy() which removes all
weak references of the vma and *then* puts the initial vma refcount.
This makes a strong vma reference hold on to the vma unconditionally.
Perhaps a better name would be i915_vma_revoke() or i915_vma_zombify(),
since other callers may still hold a refcount, but with the prospect of
being able to replace the vma refcount with the object lock in the near
future, let's stick with i915_vma_destroy().
Finally this commit fixes a race in that previously i915_vma_release() and
now i915_vma_destroy() could destroy a vma without taking the vm->mutex
after an advisory check that the vma mm_node was not allocated.
This would race with the ungrab_vma() function creating a trace similar
to the below one. This was fixed in one of the __i915_vma_put() callsites
in
commit bc1922e5d349 ("drm/i915: Fix a race between vma / object destruction and unbinding")
but although not seemingly triggered by CI, that
is not sufficient. This patch is needed to fix that properly.
[823.012188] Console: switching to colour dummy device 80x25
[823.012422] [IGT] gem_ppgtt: executing
[823.016667] [IGT] gem_ppgtt: starting subtest blt-vs-render-ctx0
[852.436465] stack segment: 0000 [#1] PREEMPT SMP NOPTI
[852.436480] CPU: 0 PID: 3200 Comm: gem_ppgtt Not tainted 5.16.0-CI-CI_DRM_11115+ #1
[852.436489] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR5 RVP, BIOS ADLPFWI1.R00.2422.A00.2110131104 10/13/2021
[852.436499] RIP: 0010:ungrab_vma+0x9/0x80 [i915]
[852.436711] Code: ef e8 4b 85 cf e0 e8 36 a3 d6 e0 8b 83 f8 9c 00 00 85 c0 75 e1 5b 5d 41 5c 41 5d c3 e9 d6 fd 14 00 55 53 48 8b af c0 00 00 00 <8b> 45 00 85 c0 75 03 5b 5d c3 48 8b 85 a0 02 00 00 48 89 fb 48 8b
[852.436727] RSP: 0018:ffffc90006db7880 EFLAGS: 00010246
[852.436734] RAX: 0000000000000000 RBX: ffffc90006db7598 RCX: 0000000000000000
[852.436742] RDX: ffff88815349e898 RSI: ffff88815349e858 RDI: ffff88810a284140
[852.436748] RBP: 6b6b6b6b6b6b6b6b R08: ffff88815349e898 R09: ffff88815349e8e8
[852.436754] R10: 0000000000000001 R11: 0000000051ef1141 R12: ffff88810a284140
[852.436762] R13: 0000000000000000 R14: ffff88815349e868 R15: ffff88810a284458
[852.436770] FS: 00007f5c04b04e40(0000) GS:ffff88849f000000(0000) knlGS:0000000000000000
[852.436781] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[852.436788] CR2: 00007f5c04b38fe0 CR3: 000000010a6e8001 CR4: 0000000000770ef0
[852.436797] PKRU: 55555554
[852.436801] Call Trace:
[852.436806] <TASK>
[852.436811] i915_gem_evict_for_node+0x33c/0x3c0 [i915]
[852.437014] i915_gem_gtt_reserve+0x106/0x130 [i915]
[852.437211] i915_vma_pin_ww+0x8f4/0xb60 [i915]
[852.437412] eb_validate_vmas+0x688/0x860 [i915]
[852.437596] i915_gem_do_execbuffer+0xc0e/0x25b0 [i915]
[852.437770] ? deactivate_slab+0x5f2/0x7d0
[852.437778] ? _raw_spin_unlock_irqrestore+0x50/0x60
[852.437789] ? i915_gem_execbuffer2_ioctl+0xc6/0x2c0 [i915]
[852.437944] ? init_object+0x49/0x80
[852.437950] ? __lock_acquire+0x5e6/0x2580
[852.437963] i915_gem_execbuffer2_ioctl+0x116/0x2c0 [i915]
[852.438129] ? i915_gem_do_execbuffer+0x25b0/0x25b0 [i915]
[852.438300] drm_ioctl_kernel+0xac/0x140
[852.438310] drm_ioctl+0x201/0x3d0
[852.438316] ? i915_gem_do_execbuffer+0x25b0/0x25b0 [i915]
[852.438490] __x64_sys_ioctl+0x6a/0xa0
[852.438498] do_syscall_64+0x37/0xb0
[852.438507] entry_SYSCALL_64_after_hwframe+0x44/0xae
[852.438515] RIP: 0033:0x7f5c0415b317
[852.438523] Code: b3 66 90 48 8b 05 71 4b 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 41 4b 2d 00 f7 d8 64 89 01 48
[852.438542] RSP: 002b:00007ffd765039a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[852.438553] RAX: ffffffffffffffda RBX: 000055e4d7829dd0 RCX: 00007f5c0415b317
[852.438562] RDX: 00007ffd76503a00 RSI: 00000000c0406469 RDI: 0000000000000017
[852.438571] RBP: 00007ffd76503a00 R08: 0000000000000000 R09: 0000000000000081
[852.438579] R10: 00000000ffffff7f R11: 0000000000000246 R12: 00000000c0406469
[852.438587] R13: 0000000000000017 R14: 00007ffd76503a00 R15: 0000000000000000
[852.438598] </TASK>
[852.438602] Modules linked in: snd_hda_codec_hdmi i915 mei_hdcp x86_pkg_temp_thermal snd_hda_intel snd_intel_dspcfg drm_buddy coretemp crct10dif_pclmul crc32_pclmul snd_hda_codec ttm ghash_clmulni_intel snd_hwdep snd_hda_core e1000e drm_dp_helper ptp snd_pcm mei_me drm_kms_helper pps_core mei syscopyarea sysfillrect sysimgblt fb_sys_fops prime_numbers intel_lpss_pci smsc75xx usbnet mii
[852.440310] ---[ end trace e52cdd2fe4fd911c ]---
v2: Fix typos in the commit message.
Fixes: 7e00897be8bf ("drm/i915: Add object locking to i915_gem_evict_for_node and i915_gem_evict_something, v2.")
Fixes: bc1922e5d349 ("drm/i915: Fix a race between vma / object destruction and unbinding")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222133209.587978-1-thomas.hellstrom@linux.intel.com
|
|
This JSP2 PCH actually seems to be some special Apple
specific ICP variant rather than a JSP. Make it so. Or at
least all the references to it seem to be some Apple ICL
machines. Didn't manage to find these PCI IDs in any
public chipset docs unfortunately.
The only thing we're losing here with this JSP->ICP change
is Wa_14011294188, but based on the HSD that isn't actually
needed on any ICP based design (including JSP), only TGP
based stuff (including MCC) really need it. The documented
w/a just never made that distinction because Windows didn't
want to differentiate between JSP and MCC (not sure how
they handle hpd/ddc/etc. then though...).
Cc: stable@vger.kernel.org
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4226
Fixes: 943682e3bd19 ("drm/i915: Introduce Jasper Lake PCH")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220224132142.12927-1-ville.syrjala@linux.intel.com
Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Tested-by: Tomas Bzatek <bugs@bzatek.net>
(cherry picked from commit 53581504a8e216d435f114a4f2596ad0dfd902fc)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
SLPC unset param H2G only needs one parameter - the id of the
param.
Fixes: 025cb07bebfa ("drm/i915/guc/slpc: Cache platform frequency limits")
Suggested-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216181504.7155-1-vinay.belgaumkar@intel.com
(cherry picked from commit 9648f1c3739505557d94ff749a4f32192ea81fe3)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
Check that mappable vs non-mappable matches our expectations.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225145502.331818-7-matthew.auld@intel.com
|
|
Otherwise we get -EINVAL, instead of the more useful -E2BIG if the
allocation doesn't fit within the pfn range, like with mappable lmem.
The hugepages selftest, for example, needs this to know if a smaller
size is needed.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225145502.331818-6-matthew.auld@intel.com
|
