summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/i915/intel_bios.h
AgeCommit message (Collapse)AuthorFilesLines
2016-12-20drm/i915/dsi: Fix swapping of MIPI_SEQ_DEASSERT_RESET / MIPI_SEQ_ASSERT_RESETHans de Goede1-3/+9
Looking at the ADF code from the Android kernel sources for a cherrytrail tablet I noticed that it is calling the MIPI_SEQ_ASSERT_RESET sequence from the panel prepare hook. Until commit b1cb1bd29189 ("drm/i915/dsi: update reset and power sequences in panel prepare/unprepare hooks") the mainline i915 code was doing the same. That commits effectively swaps the calling of MIPI_SEQ_ASSERT_RESET / MIPI_SEQ_DEASSERT_RESET. Looking at the naming of the sequences that is the right thing to do, but the problem is, that the old mainline code and the ADF code was actually calling the right sequence (tested on a cube iwork8 air tablet), and the swapping of the calling breaks things. This breakage was likely not noticed in testing because on cherrytrail, currently chv_exec_gpio ends up disabling the gpio pins rather then setting them (this is fixed in the next patch in this patch-set). This commit fixes the swapping by fixing MIPI_SEQ_ASSERT/DEASSERT_RESET's places in the enum defining them, so that their (new) names match their actual use. Changes in v2: -Add a comment to the enum explaining that the assert/reassert names are swapped in the spec Fixes: b1cb1bd29189 ("drm/i915/dsi: update reset and power sequences...") Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161202150128.29871-1-hdegoede@redhat.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit 2b8208ac93be2783edc627fc02d9ca50cc479923) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-02drm/i915: Parse LFP brightness control field in VBTDeepak M1-0/+8
These fields in VBT indicates the PWM source which is used and also the controller number. v2 by Jani: check for out of bounds access, some renames, change default type, etc. v3 by Jani: s/INTEL_BACKLIGHT_CABC/INTEL_BACKLIGHT_DSI_DCS/ Signed-off-by: Deepak M <m.deepak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/eee2f7b683a081f006a7df1ddad9b20fbf53c48c.1461676337.git.jani.nikula@intel.com
2016-04-26drm/i915: Parsing the PWM cntrl and CABC ON/OFF fields in VBTDeepak M1-1/+7
For dual link panel scenarios there are new fields added in the VBT which indicate on which port the PWM cntrl and CABC ON/OFF commands needs to be sent. v2: Moving the comment to intel_dsi.h(Jani) v3: Renaming the field names (Jani) v4 by Jani: make this patch only about VBT Cc: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Yetunde Adebisi <yetundex.adebisi@intel.com> Signed-off-by: Deepak M <m.deepak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1459346623-30752-2-git-send-email-jani.nikula@intel.com
2016-03-17drm/i915: hide away VBT private data in a separate headerJani Nikula1-826/+35
We've been accumulating code across the driver that depends on the VBT specific structures and defines. The VBT is an uncontrollable beast. Encourage encapsulation of the VBT data by hiding the structures and defines in a private header only to be included from intel_bios.c. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1458125015-7931-7-git-send-email-jani.nikula@intel.com
2016-01-11drm/i915/bios: add defines for v3 sequence blockJani Nikula1-0/+5
New sequences, new operations within sequences. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/96335b9fb875f79882d694360bff060251bd2f17.1450702954.git.jani.nikula@intel.com
2016-01-11drm/i915/bios: add sequences for MIPI sequence block v2Jani Nikula1-0/+3
Properly parse the new sequences added in MIPI sequence block v2. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/cc1551bdfc4392d02413b78179f3a65c786c75ab.1450702954.git.jani.nikula@intel.com
2016-01-11drm/i915/bios: interpret the i2c elementJani Nikula1-1/+1
Add parsing of the i2c element, defined in MIPI sequence block v2. Drop the status operation byte while at it, that does not exist. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/d8a2998977feee2f5b5ad609aaca787adfb41479.1450702954.git.jani.nikula@intel.com
2016-01-05drm/i915/bios: rewrite sequence block parsingJani Nikula1-2/+2
Make everything a bit more readable and clear. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/e8f2a62d78d90981a6b49fdf9ab3594f60a46033.1450702954.git.jani.nikula@intel.com
2016-01-05drm/i915/bios: fix header define name for intel_bios.hJani Nikula1-3/+3
Just for OCD. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/730e41760133dbaa1e3ab1b91631ada18676810c.1450702954.git.jani.nikula@intel.com
2015-12-22drm/i915/bios: add proper documentation for the Video BIOS Table (VBT)Jani Nikula1-10/+28
Add an overview and documentation for the VBT/BDB header structures. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/3d826d4600688ca3518713776ab5bd8a8fc9f20f.1450702954.git.jani.nikula@intel.com
2015-12-16drm/i915: move drmP.h include to i915_drv.hJani Nikula1-2/+0
The intel_bios.h header doesn't even need it, but other headers included from i915_drv.h do. Let's untangle the mess a bit. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1450271061-32646-1-git-send-email-jani.nikula@intel.com
2015-12-16drm/i915/bios: rename intel_parse_bios to intel_bios_initJani Nikula1-2/+0
While at it, move the declaration to where everything else is declared. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/7d9d879603038889f0128cf7cbbd9f591edc11dd.1450089383.git.jani.nikula@intel.com
2015-09-23drm/i915: Ignore "digital output" and "not HDMI output" bits for eDP detectionVille Syrjälä1-2/+0
Ignore DEVICE_TYPE_NOT_HDMI_OUTPUT and DEVICE_TYPE_DIGITAL_OUTPUT when trying to determine the presence of eDP based on the VBT child device type. Apparently a significant portion of VLV systems have these bits set incorrectly, and so we currently fail to detect eDP on said systems. This is based on an earlier patch [1] from Andreas Lampersperger. Instead of ignoring the bits just on VLV as was done in the orignal patch, we now ignore them for all platforms. We should still have enough bits in there to avoid false positives (unless the VBT is totally bonkers). Quoting the orignal patch: > When the i915.ko identify an eDP output on a valleyview > board, it should be more slackly. The reason for that is, > that BIOS DATA TABLES generated with intel BMP (Binary > Modification Program) do not set bits for NOT_HDMI or > DIGITAL_OUTPUT on the device type. Due to Adolfo > Sanchez from Intel EMGD, this is not possible. > To solve this problem and enable i915.ko on embedded > vlv boards with eDP, we ignore this two bits. [1] http://lists.freedesktop.org/archives/intel-gfx/2015-June/069416.html Cc: Andreas Lampersperger <lampersperger.andreas@heidenhain.de> Cc: "Sanchez, AdolfoX" <adolfox.sanchez@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-04drm/i915: access the PP_ON_DELAYS/PP_OFF_DELAYS regs only pre GEN5Imre Deak1-1/+0
These registers exist only before GEN5, so currently we may access undefined registers on VLV/CHV and BXT. Apply the workaround only pre GEN5. Since the workaround is relevant only when LVDS is present, for clarity apply it only if this is the case. This triggered an unclaimed register access warning on BXT. v2: (Ville) - move the workaround to the LVDS init code - print a debug note about the workaround Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-31drm/i915: eDP can be present on DDI-ERodrigo Vivi1-5/+0
Enable eDP on DDI-E. Also let's remove duplicated definitions to avoid later confusion. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-31drm/i915/skl: Enable DDI-ERodrigo Vivi1-0/+2
There are OEMs using DDI-E out there, so let's enable it. Unfortunately there is no detection bit for DDI-E So we need to rely on VBT for that. I also need to give credits to Xiong since before seing his approach to check info->support_* I was creating an ugly vbt->ddie_sfuse_strap in order to propagate the ddi presence info v2: Rebased as last patch in the series. since all other patches in this series are needed for anything working propperly on DDI-E. Credits-to: "Zhang, Xiong Y" <xiong.y.zhang@intel.com> Cc: "Zhang, Xiong Y" <xiong.y.zhang@intel.com> Reviewed-by: Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-24drm/i915: Allow parsing of variable size child device entries from VBTDavid Weinehall1-2/+4
VBT version 196 increased the size of common_child_dev_config. The parser code assumed that the size of this structure would not change. The modified code now copies the amount needed based on the VBT version, and emits a debug message if the VBT version is unknown (too new); since the struct config block won't shrink in newer versions it should be harmless to copy the maximum known size in such cases, so that's what we do, but emitting the warning is probably sensible anyway. In the longer run it might make sense to modify the parser code to use a version/feature mapping, rather than hardcoding things like this, but for now the variants are fairly manageable. This fixes a regression introduced in commit 75067ddecf21271631bc018d2fb23ddd09b66aae Author: Antti Koskipaa <antti.koskipaa@linux.intel.com> Date: Fri Jul 10 14:10:55 2015 +0300 drm/i915: Per-DDI I_boost override since that commit changed the child device config size without updating the checks and memcpy. v2: Stricter size checks v3 by Jani: - Keep the checks strict, and warnigns verbose, but keep going anyway. - Take care to copy the max amount of child device config we can. - Fix the messages. Signed-off-by: David Weinehall <david.weinehall@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-14drm/i915: Per-DDI I_boost overrideAntti Koskipaa1-0/+9
An OEM may request increased I_boost beyond the recommended values by specifying an I_boost value to be applied to all swing entries for a port. These override values are specified in VBT. v2: rebase and remove unused iboost_bit variable Issue: VIZ-5676 Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-21drm/i915: Use the CRC gpio for panel enable/disableShobhit Kumar1-0/+7
The CRC (Crystal Cove) PMIC, controls the panel enable and disable signals for BYT for dsi panels. This is indicated in the VBT fields. Use that to initialize and use GPIO based control for these signals. v2: Use the newer gpiod interface(Alexandre) v3: Remove the redundant checks and unused code (Ville) v4: Moved PWM vs SoC backlight #defines to intel_bios.h (Jani) CC: Samuel Ortiz <sameo@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-10drm/i915: Fix the VBT child device parsing for BSWVille Syrjälä1-2/+2
Recent BSW VBT has a VBT child device size 37 bytes instead of the 33 bytes our code assumes. This means we fail to parse the VBT and thus fail to detect eDP ports properly and just register them as DP ports instead. Fix it up by using the reported child device size from the VBT instead of assuming it matches out struct defintions. The latest spec I have shows that the child device size should be 36 bytes for rev >= 195, however on my BSW the size is actually 37 bytes. And our current struct definition is 33 bytes. Feels like the entire VBT parses would need to be rewritten to handle changes in the layout better, but for now I've decided to do just the bare minimum to get my eDP port back. Cc: Vijay Purushothaman <vijay.a.purushothaman@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25drm/i915/skl: Support for edp low_vswing param in vbtSonika Jindal1-0/+1
v2: Adding VBT version check for low_vswing field, and correcting parsing v3: (Damien) - Restrain the scope of the 'vswing' variable - Use the more idiomatic "ev_priv->vbt.edp_low_vswing = vswing == 0;" instead of if (foo) var = true; else var = false; - Shorten edp_vswing_premph_setting to edp_vswing_premph to fit in 80 chars - Add the version from which the edp_vswing_premph field is valid in the struct definition Reviewed-by: Satheeshakrishna M <satheeshakrishna.m@intel.com> (v2) Signed-off-by: Sonika Jindal <sonika.jindal@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-07Revert "drm/i915: Parsing LFP brightness control from VBT"Rodrigo Vivi1-11/+0
This reverts commit 371abae844ede392066bfc21202b2e40f4a654d1. This data seems unreliable and causing many issues and blocking other teams and feature implementation. Safest way is to revert that for now. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88081 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88039 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87671 Cc: Vandana Kannan <vandana.kannan@intel.com> Cc: Deepak M <m.deepak@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Kristian Høgsberg <hoegsberg@gmail.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-15drm/i915: Parsing LFP brightness control from VBTDeepak M1-0/+11
LFP brighness control from the VBT block 43 indicates which controller is used for brightness. LFP1 brightness control method: Bit 7-4 = This field controller number of the brightnes controller. 0 = Controller 0 1 = Controller 1 2 = Controller 2 3 = Controller 3 Others = Reserved Bits 3-0 = This field specifies the brightness control pin to be used on the platform. 0 = PMIC pin is used for brightness control 1 = LPSS PWM is used for brightness control 2 = Display DDI is used for brightness control 3 = CABC method to control brightness Others = Reserved Adding the above fields in dev_priv->vbt and corresponding changes in parse_backlight() v2: Jani's review comments addressed - Move PWM definitions to intel_bios.h - Moving vbt_version to intel_vbt_data - Rename brightness to bl_ctrl_data - Logging just control_pin instead of string - Avoid adding vbt_version in dev_priv - Since only DDI option is available as of now, let control pin DDI affect dev_priv->vbt.backlight.present v3: Jani's review comments addressed - Drop control_pin - Use bdb->version - set controller to 0 instead of using control pin define - check controller bounds - remove superfluous changes in intel_parse_bios Signed-off-by: Deepak M <m.deepak@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-05drm/i915: Pixel Clock changes for DSI dual linkGaurav K Singh1-1/+2
For dual link MIPI Panels, each port needs half of pixel clock. Pixel overlap can be enabled if needed by panel, then in that case, pixel clock will be increased for extra pixels. v2 : Address review comments by Jani - Removed the bit mask used for ->dual_link - Used DSI instead of MIPI for #define variables v3: Added the VLV_DISPLAY_BASE to VLV_CHICKEN_3 register Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com> Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-03drm/i915: Parse VBT PSR block.Rodrigo Vivi1-1/+21
PSR (aka SRD) block is defined at VBT and currently being used. Mainly/At-least to configure the amount of idle_frames require to get back to PSR Entry. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-19drm/i915/bios: add missing __packed to structs used for reading vbtJani Nikula1-5/+5
This does not seem to make a difference for the structs in question, but document the intent. v2: also pack union child_device_config (Daniel) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-08-08drm/i915: Add support for Video Burst Mode for MIPI DSIShobhit Kumar1-1/+2
v2: Updated the error log as suggested by Imre Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-05drm/i915: Detect if MIPI panel based on VBT and initialize only if presentShobhit Kumar1-0/+4
It seems by default the VBT has MIPI configuration block as well. The Generic driver will assume always MIPI if MIPI configuration block is found. This is causing probelm when actually there is eDP. Fix this by looking into general definition block which will have device configurations. From here we can figure out what is the LFP type and initialize MIPI only if MIPI is found. v2: Addressed review comments by Damien - Moved PORT definitions to intel_bios.h and renamed as DVO_PORT_MIPIA - renamed is_mipi to has_mipi and moved definition as suggested - Check has_mipi inside parse_mipi and intel_dsi_init insted of outside v3: Make has_mipi as a bitfield as suggested Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: fold in conditions to pack everything neatly below 80 chars.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-01Merge tag 'drm-intel-next-2014-04-16' of ↵Dave Airlie1-0/+60
git://anongit.freedesktop.org/drm-intel into drm-next drm-intel-next-2014-04-16: - vlv infoframe fixes from Jesse - dsi/mipi fixes from Shobhit - gen8 pageflip fixes for LRI/SRM from Damien - cmd parser fixes from Brad Volkin - some prep patches for CHV, DRRS, ... - and tons of little things all over drm-intel-next-2014-04-04: - cmd parser for gen7 but only in enforcing and not yet granting mode - the batch copying stuff is still missing. Also performance is a bit ... rough (Brad Volkin + OACONTROL fix from Ken). - deprecate UMS harder (i.e. CONFIG_BROKEN) - interrupt rework from Paulo Zanoni - runtime PM support for bdw and snb, again from Paulo - a pile of refactorings from various people all over the place to prep for new stuff (irq reworks, power domain polish, ...) drm-intel-next-2014-04-04: - cmd parser for gen7 but only in enforcing and not yet granting mode - the batch copying stuff is still missing. Also performance is a bit ... rough (Brad Volkin + OACONTROL fix from Ken). - deprecate UMS harder (i.e. CONFIG_BROKEN) - interrupt rework from Paulo Zanoni - runtime PM support for bdw and snb, again from Paulo - a pile of refactorings from various people all over the place to prep for new stuff (irq reworks, power domain polish, ...) Conflicts: drivers/gpu/drm/i915/i915_gem_context.c
2014-04-14drm/i915: Add parsing support for new MIPI blocks in VBTShobhit Kumar1-0/+31
The parser extracts the config block(#52) and sequence(#53) data and store in private data structures. v2: Address review comments by Jani - adjust code for the structure changes for bdb_mipi_config - add boundry and buffer overflow checks as suggested - use kmemdup instead of kmalloc and memcpy v3: More strict check while parsing VBT - Ensure that at anytime we do not go beyond sequence block while parsing - On unknown element fail the whole parsing v4: Style changes and spell check mostly as suggested by Jani Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-11drm/i915: check VBT for supported backlight typeJani Nikula1-0/+3
The only supported types are none and PWM. Other values are obsolete or reserved, don't add them. Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Martin <bugs@mrvanes.com> Tested-by: jrg.otte@gmail.com Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-04-01drm/i915: Adding VBT fields to support eDP DRRS featurePradeep Bhat1-0/+29
This patch reads the DRRS support and Mode type from VBT fields. The read information will be stored in VBT struct during BIOS parsing. The above functionality is needed for decision making whether DRRS feature is supported in i915 driver for eDP panels. This information helps us decide if seamless DRRS can be done at runtime to support certain power saving features. This patch was tested by setting necessary bit in VBT struct and merging the new VBT with system BIOS so that we can read the value. v2: Incorporated review comments from Chris Wilson Removed "intel_" as a prefix for DRRS specific declarations. v3: Incorporated Jani's review comments Removed function which deducts drrs mode from panel_type. Modified some print statements. Made changes to use DRRS_NOT_SUPPORTED as 0 instead of -1. v4: Incorporated Jani's review comments. Modifications around setting vbt drrs_type. Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> [danvet: Drop the misleading/redundant comment about the added drrs field in the vbt struct as discussed with Jani on irc.] Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-05drm/i915: Update VBT data structures to have MIPI block enhancementsShobhit Kumar1-29/+145
MIPI Block #52 which provides configuration details for the MIPI panel including dphy settings as per panel and tcon specs Block #53 gives information on panel enable sequences v2: Address review comemnts from Jani - Move panel ids from intel_dsi.h to intel_bios.h - bdb_mipi_config structure improvements for cleaner code - Adding units for the pps delays, all in ms - change data structure to be more cleaner and simple v3: Corrected the unit for pps delays as 100us Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-16drm/i915: parse backlight modulation frequency from the BIOS VBTJani Nikula1-0/+16
We don't actually do anything with the information yet, but parse and log what's in the VBT. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-03drm/i915: use __packed instead of __attribute__((packed))Jani Nikula1-24/+24
Checkpatch tells me WARNING: __packed is preferred over __attribute__((packed)) so switch over to __packed across the driver before adding new packed structs. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-11-05drm/i915: Make intel_dp_is_edp() less specificVille Syrjälä1-0/+18
All the bits in the VBT child device type have some speciifc meaning, so looking for an exact match isn't always the right thing. On some VLVs for example the device type for eDP panels is 0x1806. If we mask out the bits that could concievably change between different eDP panels, we are left with the set of bits that should still tell us if the port is eDP or not. v2: Use the named bits for VBT child device type Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71051 Tested-by: Robert Hooker <robert.hooker@canonical.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-11-05drm/i915: Give names to the VBT child device type bitsVille Syrjälä1-0/+16
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: use the HDMI DDI buffer translations from VBTPaulo Zanoni1-0/+13
We currently use the recommended values from BSpec, but the VBT specifies the correct value to use for the hardware we have, so use it. We also fall back to the recommended value in case we can't find the VBT. In addition, this code also provides some infrastructure to parse more information about the DDI ports. There's a lot more information we could extract and use in the future. v2: - Move some code to init_vbt_defaults. v3: - Rebase - Clarify the "DVO Port" matching code v4: - Use I915_MAX_PORTS - Change the HAS_DDI checks - Replace DRM_ERROR with DRM_DEBUG_KMS Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: VBT's child_device_config changes over timePaulo Zanoni1-2/+31
We currently treat the child_device_config as a simple struct, but this is not correct: new BDB versions change the meaning of some offsets, so the struct needs to be adjusted for each version. Since there are too many changes (today we're in version 170!), making a big versioned union would be too complicated, so child_device_config is now a union of 3 things: (i) a "raw" byte array that's safe to use anywhere; (ii) an "old" structure that's the one we've been using and should be safe to keep in the SDVO and TV code; and (iii) a "common" structure that should contain only fields that are common for all the known VBT versions. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-04drm/i915: Parse the MIPI related VBT Block and store relevant infoShobhit Kumar1-0/+41
Initial parsing of the VBT MIPI block. For now, just store the panel id if found. Note: Again there seems to be no documentation for this piece of lore. The doc situation for byt+ is just a bad joke :( Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-18drm/i915: set CPT FDI RX polarity bits based on VBTPaulo Zanoni1-1/+3
Check the VBT to see if the machine has inverted FDI RX polarity on CPT. Based on this bit, set the appropriate bit on the TRANS_CHICKEN2 registers. This should fix some machines that were showing black screens on all outputs. Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=60029 Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-02UAPI: (Scripted) Convert #include "..." to #include <path/...> in drivers/gpu/David Howells1-1/+1
Convert #include "..." to #include <path/...> in drivers/gpu/. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Dave Airlie <airlied@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
2012-06-27drm/i915/bios: cleanup return type of intel_parse_bios()Dan Carpenter1-1/+1
These are unintuitive. These are type bool and return -1 casted to true on failure. Let's just make it return an int. The callers don't care, but let's change this as a cleanup. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-13drm/i915: VBT Parser cleanup for eDP blockRohit Jain1-1/+5
Support for parsing parameters for S3D support and T3 optimization support is implemented. The order for the bdb_edp struct was also made similar to that indicated in spec. Signed-off-by: Rohit Jain <rohit.jain@intel.com> Reviewed-by: Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by: Vijay A. Purushothaman <vijay.a.purushothaman@intel.com> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Acked-by: Jesse Barnes <jesse.barnes@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-20drm/i915: Remove "i2c_speed" nonsense from child device tableAdam Jackson1-2/+1
I have no evidence for this byte being used this way, and lots of counterexamples. Restore the struct to its empirical definition and patch up gmbus setup to match. Signed-off-by: Adam Jackson <ajax@redhat.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-20Merge branch 'fix-pch-refclk' into fooKeith Packard1-2/+7
2011-10-20Merge branch 'edp-training-fixes' into drm-intel-nextKeith Packard1-4/+4
Conflicts: drivers/gpu/drm/i915/intel_dp.c Just whitespace change conflicts
2011-10-06drm/i915: Correct eDP panel power sequencing delay computationsKeith Packard1-4/+4
Store the panel power sequencing delays in the dp private structure, rather than the global device structure. Who knows, maybe we'll get more than one eDP device in the future. From the eDP spec, we need the following numbers: T1 + T3 Power on to Aux Channel operation (panel_power_up_delay) This marks how long it takes the panel to boot up and get ready to receive aux channel communications. T8 Video signal to backlight on (backlight_on_delay) Once a valid video signal is being sent to the device, it can take a while before the panel is actuall showing useful data. This delay allows the panel to get something reasonable up before the backlight is turned on. T9 Backlight off to video off (backlight_off_delay) Turning the backlight off can take a moment, so this delay makes sure there is still valid video data on the screen. T10 Video off to power off (panel_power_down_delay) Presumably this delay allows the panel to perform an orderly shutdown of the display. T11 + T12 Power off to power on (panel_power_cycle_delay) So, once you turn the panel off, you have to wait a while before you can turn it back on. This delay is usually the longest in the entire sequence. Neither the VBIOS source code nor the hardware documentation has a clear mapping between the delay values they provide and those required by the eDP spec. The VBIOS code actually uses two different labels for the delay values in the five words of the relevant VBT table. **** MORE LATER *** Look at both the current hardware register settings and the VBT specified panel power sequencing timings. Use the maximum of the two delays, to make sure things work reliably. If there is no VBT data, then those values will be initialized to zero, so we'll just use the values as programmed in the hardware. Note that the BIOS just fetches delays from the VBT table to place in the hardware registers, so we should get the same values from both places, except for rounding. VBT doesn't provide any values for T1 or T2, so we'll always just use the hardware value for that. The panel power up delay is thus T1 + T2 + T3, which should be sufficient in all cases. The panel power down delay is T1 + T2 + T12, using T1+T2 as a proxy for T11, which isn't available anywhere. For the backlight delays, the eDP spec says T6 + T8 is the delay from the end of link training to backlight on and T9 is the delay from backlight off until video off. The hardware provides a 'backlight on' delay, which I'm taking to be T6 + T8 while the VBT provides something called 'T7', which I'm assuming is s On the macbook air I'm testing with, this yields a power-up delay of over 200ms and a power-down delay of over 600ms. It all works now, but we're frobbing these power controls several times during mode setting, making the whole process take an awfully long time. Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-27drm/i915: Document a few more BDB_GENERAL_FEATURES bits from PCH BIOSKeith Packard1-1/+4
This includes whether an eDP panel is present, and whether that should use SSC (and at what frequency) Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-27drv/i915: Pull display_clock_mode out of VBT tableKeith Packard1-1/+3
This tells the driver whether a CK505 clock source is available on pre-PCH hardware. If so, it should be used as the non-SSC source, leaving the internal clock for use as the SSC source. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Chris Wison <chris@chris-wilson.co.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 20:22:55 +0000