summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/i915/i915_irq.c
AgeCommit message (Collapse)AuthorFilesLines
2021-02-22drm/i915/display: Rename for_each_intel_encoder.*_can_psr to ↵José Roberto de Souza1-2/+2
for_each_intel_encoder.*_with_psr for_each_intel_encoder.*_"can_psr" sounds strange, in my opinion "with_psr" is better. Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209181439.215104-1-jose.souza@intel.com
2021-02-05drm/i915/display: Support PSR Multiple InstancesGwan-gyeong Mun1-12/+30
It is a preliminary work for supporting multiple EDP PSR and DP PanelReplay. And it refactors singleton PSR to Multi Transcoder supportable PSR. And this moves and renames the i915_psr structure of drm_i915_private's to intel_dp's intel_psr structure. It also causes changes in PSR interrupt handling routine for supporting multiple transcoders. But it does not change the scenario and timing of enabling and disabling PSR. And it not support multiple pipes with a single transcoder PSR case yet. v2: Fix indentation and add comments v3: Remove Blank line v4: Rebased v5: Rebased and Addressed Anshuman's review comment. - Move calling of intel_psr_init() to intel_dp_init_connector() v6: Address Anshuman's review comments - Remove wrong comments and add comments for a limit of supporting of a single pipe PSR v7: Update intel_psr_compute_config() for supporting multiple transcoder PSR on BDW+ v8: Address Anshuman's review comments - Replace DRM_DEBUG_KMS with drm_dbg_kms() / DRM_WARN with drm_warn() v9: Fix commit message v10: Rebased v11: Address Jose's review comment. - Reorder calling order of intel_psr2_program_trans_man_trk_ctl(). - In order to reduce changes keep the old name for drm_i915_private. - Change restrictions of multiple instances of PSR. v12: Address Jose's review comment. - Change the calling of intel_psr2_program_trans_man_trk_ctl() into commit_pipe_config(). - Change a checking order of CAN_PSR() and connector_status to original on i915_psr_sink_status_show(). - Drop unneeded intel_dp_update_pipe() function. - In order to wait a specific encoder which belong to crtc_state on intel_psr_wait_for_idle(), add checking of encoder. - Add an whitespace to comments. v13: Rebased and Address Jose's review comment. - Add and use for_each_intel_psr_enabled_encoder() macro. - In order to use correct frontbuffer_bit for each pipe, fix intel_psr_invalidate() and intel_psr_flush(). - Remove redundant or unneeded codes. - Update comments. v14: Address Jose's review comment - Add and use for_each_intel_encoder_can_psr() macro and for_each_intel_encoder_mask_can_psr() macro. - Add source_support member variable into intel_psr structure. - Update CAN_PSR() macro that checks source_support. - Move encoder's PSR availity check to psr_init() from psr_compute_config(). - Remove redundant or unneeded codes. v15: Remove wrong mutex lock/unlock of PSR from intel_psr2_program_trans_man_trk_ctl() Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Cc: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210204134015.419036-1-gwan-gyeong.mun@intel.com
2021-02-02Merge tag 'topic/drm-device-pdev-2021-02-02' of ↵Jani Nikula1-3/+3
git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next Driver Changes: - drm/i915: Remove references to struct drm_device.pdev Signed-off-by: Jani Nikula <jani.nikula@intel.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87y2g6fxxv.fsf@intel.com
2021-02-02drm/i915: Remove references to struct drm_device.pdevThomas Zimmermann1-3/+3
Using struct drm_device.pdev is deprecated. Convert i915 to struct drm_device.dev. No functional changes. v6: * also remove assignment in selftests/ in a later patch (Chris) v5: * remove assignment in later patch (Chris) v3: * rebased v2: * move gt/ and gvt/ changes into separate patches Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210128133127.2311-2-tzimmermann@suse.de
2021-02-02Merge tag 'topic/adl-s-enabling-2021-02-01-1' of ↵Jani Nikula1-3/+2
git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next Driver Changes: - Add basic support for Alder Lake S, to be shared between drm-intel-next and drm-intel-gt-next Signed-off-by: Jani Nikula <jani.nikula@intel.com> # Conflicts: # drivers/gpu/drm/i915/i915_drv.h From: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210202025620.2212559-1-lucas.demarchi@intel.com
2021-02-01drm/i915/display: Add HAS_D12_PLANE_MINIMIZATIONJosé Roberto de Souza1-1/+1
- As RKL and ADL-S only have 5 planes, primary and 4 sprites and the cursor plane, let's group the handling together under HAS_D12_PLANE_MINIMIZATION. - Also use macro to select pipe irq fault error mask. BSpec: 49251 Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Aditya Swarup <aditya.swarup@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-5-aditya.swarup@intel.com
2021-01-29drm/i915: Implement async flips for vlv/chvVille Syrjälä1-0/+3
Add support for async flips on vlv/chv. Unlike all the other platforms vlv/chv do not use the async flip bit in DSPCNTR and instead we select between async vs. sync flips based on the surface address register. The normal DSPSURF generates sync flips DSPADDR_VLV generates async flips. And as usual the interrupt bits are different from the other platforms. Cc: Karthik B S <karthik.b.s@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-12-ville.syrjala@linux.intel.com Reviewed-by: Karthik B S <karthik.b.s@intel.com>
2021-01-29drm/i915: Implement async flip for ilk/snbVille Syrjälä1-0/+5
Add support for async flips on ivb/hsw. Again no need for any workarounds and just have to deal with the interrupt bits being shuffled around a bit. Cc: Karthik B S <karthik.b.s@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-11-ville.syrjala@linux.intel.com Reviewed-by: Karthik B S <karthik.b.s@intel.com>
2021-01-29drm/i915: Implement async flip for ivb/hswVille Syrjälä1-0/+6
Add support for async flips on ivb/hsw. Unlike bdw+ we don't need any workarounds to disable async flips. Apart from that the only real difference from the bdw implementation is the location of the flip_done interrupt bits. Cc: Karthik B S <karthik.b.s@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-10-ville.syrjala@linux.intel.com Reviewed-by: Karthik B S <karthik.b.s@intel.com>
2021-01-29drm/i915: Implement async flips for bdwVille Syrjälä1-11/+14
Implement async flip support for BDW. The implementation is similar to the skl+ code. And just like skl/bxt/glk bdw also needs the disable w/a, thus we need to plumb the desired state of the async flip all the way down to i9xx_plane_ctl_crtc(). According to the spec we do need to bump the surface alignment to 256KiB for this. Async flips require an X-tiled buffer so we don't have to worry about linear. Cc: Karthik B S <karthik.b.s@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-9-ville.syrjala@linux.intel.com Reviewed-by: Karthik B S <karthik.b.s@intel.com>
2021-01-26drm/i915/adl_s: Add Interrupt SupportAnusha Srivatsa1-2/+1
ADLS follows ICP/TGP like interrupts. v2: Use "INTEL_PCH_TYPE(dev_priv) >= PCH_ICP" of hpd_icp (Lucas) Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Aditya Swarup <aditya.swarup@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210125140753.347998-4-aditya.swarup@intel.com
2021-01-25drm/i915: Fix vblank timestamps with VRRVille Syrjälä1-1/+14
To get sensible vblank timestamping behaviour we need to feed the vmax based timings to the vblank code, otherwise it'll chop off the scanline counter when it exceeds the minumum vtotal. Additionally with VRR we have three cases to consider when we generate the vblank timestamp: 1) we are in vertical active -> nothing special needs to be done, just return the current scanout position and the core will calculate the timestamp corresponding to the past time when the current vertical active started 2) we are in vertical blank and no push has been sent -> the hardware will keep extending the vblank presumably to its maximum length, so we make the timestmap match the expected time when the max length vblank will end. Since the timings used for this are now based on vmax nothing special actually needs to be done 3) we are in vblank and a push has been sent so the vblank is about to terminate -> presumably we want the timestmap to accurately reflect when the vblank will terminate, so we use the sampled frame timestamp vs. current timestamp to guesstimate how far along the vblank exit we are, and then we adjust the reported scanout position accordingly so that the core will see that the vblank is close to ending. v2: * Fix the else if (use_scanline_Counter) (Manasi) Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-17-manasi.d.navare@intel.com
2021-01-25drm/i915: Extract intel_crtc_scanlines_since_frame_timestamp()Ville Syrjälä1-14/+24
Extract intel_crtc_scanlines_since_frame_timestamp() from __intel_get_crtc_scanline_from_timestamp(). We'll reuse this for VRR vblank timestamps. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-5-manasi.d.navare@intel.com
2021-01-19drm/i915: Add plane vfuncs to enable/disable flip_done interruptVille Syrjälä1-26/+0
Prepare for more platforms with async flip support by turning the flip_done interrupt enable/disable into plane vfuncs. Cc: Karthik B S <karthik.b.s@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-6-ville.syrjala@linux.intel.com Reviewed-by: Karthik B S <karthik.b.s@intel.com>
2021-01-19drm/i915: Drop redundant parensVille Syrjälä1-1/+1
Drop the pointless extra parens. Cc: Karthik B S <karthik.b.s@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-4-ville.syrjala@linux.intel.com Reviewed-by: Karthik B S <karthik.b.s@intel.com>
2021-01-07Merge tag 'drm-intel-next-2021-01-04' of ↵Daniel Vetter1-184/+171
git://anongit.freedesktop.org/drm/drm-intel into drm-next - Display hotplug fix for gen2/gen3 (Chris) - Remove trailing semicolon (Tom) - Suppress display warnings for old ifwi presend on our CI (Chris) - OA/Perf related workaround (Lionel) - Replace I915_READ/WRITE per new uncore and display read/write functions (Jani) - PSR improvements (Jose) - HDR and other color changes on LSPCON (Uma, Ville) - FBC fixes for TGL (Uma) - Record plane update times for debugging (Chris) - Refactor panel backlight control functions (Dave) - Display power improvements (Imre) - Add VRR register definition (Manasi) - Atomic modeset improvements for bigjoiner pipes (Ville) - Switch off the scanout during driver unregister (Chris) - Clean-up DP's FEW enable (Manasi) - Fix VDSCP slice count (Manasi) - Fix and clean up around rc_model_size for DSC (Jani) - Remove Type-C noisy debug warn message (Sean) - Display HPD code clean-up (Ville) - Refactor Intel Display (Dave) - Start adding support for Intel's eDP backlight controls (Lyude) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210104211018.GA1094707@intel.com
2020-12-24Merge tag 'irq-core-2020-12-23' of ↵Linus Torvalds1-0/+34
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "This is the second attempt after the first one failed miserably and got zapped to unblock the rest of the interrupt related patches. A treewide cleanup of interrupt descriptor (ab)use with all sorts of racy accesses, inefficient and disfunctional code. The goal is to remove the export of irq_to_desc() to prevent these things from creeping up again" * tag 'irq-core-2020-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits) genirq: Restrict export of irq_to_desc() xen/events: Implement irq distribution xen/events: Reduce irq_info:: Spurious_cnt storage size xen/events: Only force affinity mask for percpu interrupts xen/events: Use immediate affinity setting xen/events: Remove disfunct affinity spreading xen/events: Remove unused bind_evtchn_to_irq_lateeoi() net/mlx5: Use effective interrupt affinity net/mlx5: Replace irq_to_desc() abuse net/mlx4: Use effective interrupt affinity net/mlx4: Replace irq_to_desc() abuse PCI: mobiveil: Use irq_data_get_irq_chip_data() PCI: xilinx-nwl: Use irq_data_get_irq_chip_data() NTB/msi: Use irq_has_action() mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc pinctrl: nomadik: Use irq_has_action() drm/i915/pmu: Replace open coded kstat_irqs() copy drm/i915/lpe_audio: Remove pointless irq_to_desc() usage s390/irq: Use irq_desc_kstat_cpu() in show_msi_interrupt() parisc/irq: Use irq_desc_kstat_cpu() in show_interrupts() ...
2020-12-18Revert "drm/i915: re-order if/else ladder for hpd_irq_setup"Chris Wilson1-12/+15
We now use ilk_hpd_irq_setup for all GMCH platforms that do not have hotplug. These are early gen3 and gen2 devices that now explode on boot as they try to access non-existent registers. Fixes: 794d61a19090 ("drm/i915: re-order if/else ladder for hpd_irq_setup") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201127145748.29491-1-chris@chris-wilson.co.uk (cherry picked from commit e5346a1ff38a405c14ce8e595269e9b7dcfbb2e9) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-12-15drm/i915: Reduce duplicated switch cases in hpd codeVille Syrjälä1-16/+3
With GEN11_HOTPLUG_CTL_LONG_DETECT(), SHOTPLUG_CTL_DDI_HPD_LONG_DETECT() and ICP_TC_HPD_LONG_DETECT() taking the hpd_pin as their argument we can remove some duplication in the long_detect() switch statements. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201204182309.14213-1-ville.syrjala@linux.intel.com Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
2020-12-15drm/i915/pmu: Replace open coded kstat_irqs() copyThomas Gleixner1-0/+34
Driver code has no business with the internals of the irq descriptor. Aside of that the count is per interrupt line and therefore takes interrupts from other devices into account which share the interrupt line and are not handled by the graphics driver. Replace it with a pmu private count which only counts interrupts which originate from the graphics card. To avoid atomics or heuristics of some sort make the counter field 'unsigned long'. That limits the count to 4e9 on 32bit which is a lot and postprocessing can easily deal with the occasional wraparound. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Jani Nikula <jani.nikula@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: https://lore.kernel.org/r/20201210194043.957046529@linutronix.de
2020-12-01drm/i915/irq: replace I915_READ()/WRITE() with intel_uncore_read()/write()Jani Nikula1-168/+168
Arguably some of these should use intel_de_read() or intel_de_write(), however not all. Prioritize I915_READ() and I915_WRITE() removal in general over migrating to the pedantically correct replacements right away. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201130111601.2817-8-jani.nikula@intel.com
2020-11-27Revert "drm/i915: re-order if/else ladder for hpd_irq_setup"Chris Wilson1-12/+15
We now use ilk_hpd_irq_setup for all GMCH platforms that do not have hotplug. These are early gen3 and gen2 devices that now explode on boot as they try to access non-existent registers. Fixes: 794d61a19090 ("drm/i915: re-order if/else ladder for hpd_irq_setup") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201127145748.29491-1-chris@chris-wilson.co.uk
2020-11-17drm/i915: Tweaked Wa_14010685332 for PCHs used on gen11 platformsBob Paauwe1-2/+4
The WA specifies that we need to toggle a SDE chicken bit on and then off as the final step in preparation for s0ix entry. Bspec: 33450 Bspec: 8402 However, something is happening after we toggle the bit that causes the WA to be invalidated. This makes dispcnlunit1_cp_xosc_clkreq active being already in s0ix state i.e SLP_S0 counter incremented. Tweaking the Wa_14010685332 by setting the bit on suspend and clearing it on resume turns down the dispcnlunit1_cp_xosc_clkreq. B.Spec has Documented this tweaked sequence of WA as an alternative. Let keep this tweaked WA for Gen11 platforms and keep untweaked WA for other platforms which never observed this issue. v2 (MattR): - Change the comment on the workaround to give PCH names rather than platform names. Although the bspec is setup to list workarounds by platform, the hardware team has confirmed that the actual issue being worked around here is something that was introduced back in the Cannon Lake PCH and carried forward to subsequent PCH's. - Extend the untweaked version of the workaround to include PCH_CNP as well. Note that since PCH_CNP is used to represent CMP, this will apply on CML and some variants of RKL too. - Cap the untweaked version of the workaround so that it won't apply to "fake" PCH's (i.e., DG1). The issue we're working around really is an issue in the PCH itself, not the South Display, so it shouldn't apply when there isn't a real PCH. v3: - use intel_de_rmw(). [Rodrigo] Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201110121700.4338-1-anshuman.gupta@intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-11-11drm/i915: Do not setup hpd without displayLucas De Marchi1-0/+3
Now that hpd/display related calls are split from the rest in intel_irq_init(), skip all of that in case we don't have display. Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201106225531.920641-8-lucas.demarchi@intel.com
2020-11-11drm/i915: move display-related to the end of intel_irq_init()Lucas De Marchi1-4/+4
In intel_irq_init() move what's display/hpd related after what is gt and guc. This makes it easier to support !HAS_DISPLAY() in future. Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201106225531.920641-7-lucas.demarchi@intel.com
2020-11-11drm/i915: re-order if/else ladder for hpd_irq_setupLucas De Marchi1-15/+12
Use the convention of new platforms first. No need to special case HAS_GMCH() since that stopped being true at the lattest on gen8 (for cherryview). Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201106225531.920641-6-lucas.demarchi@intel.com
2020-10-30drm/i915: Get rid of ibx_irq_pre_postinstall()Ville Syrjälä1-27/+15
ibx_irq_pre_postinstall() looks totally pointless. We can just init both SDEIMR and SDEIER at the same time before enabling the master interrupt. It's equally racy as the other order due to doing all of this from the postinstall stage with the interrupt handler already in place. That is, safe with MSI but racy with shared legacy interrupts. Fortunately we should have MSI on all ilk+. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-20-ville.syrjala@linux.intel.com Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
2020-10-30drm/i915: Use GEN3_IRQ_INIT() to init south interrupts in icp+Ville Syrjälä1-6/+2
No reason not to use GEN3_IRQ_INIT() on icp+. Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-19-ville.syrjala@linux.intel.com
2020-10-30drm/i915: Enable hpd logic only for ports that are presentVille Syrjälä1-96/+206
Let's enable the hardware hpd logic only for the ports we can actually use. In theory this may save some miniscule amounts of power, and more importantly it eliminates a lot if platform specific codepaths since the generic thing can now deal with any combination of ports being present on each SKU. v2: Deal with DG1 v3: Deal with DG1 some more Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-18-ville.syrjala@linux.intel.com Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
2020-10-30drm/i915: Remove per-platform IIR HPD maskingVille Syrjälä1-22/+2
We no longer unmask all HPD irqs, so we can drop the ugly per-platform HPD IIR masking. IMR will prevent unsupported bits from appearing in IIR. v2: Deal with DG1 Include "HOTPLUG" in the mask names (Lucas) v3: Fix typos in subject Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-17-ville.syrjala@linux.intel.com
2020-10-30drm/i915: Rename 'tmp_mask'Ville Syrjälä1-10/+12
Replace this silly tmp_mask with hotplug_trigger/te_trigger where appropriate. Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-16-ville.syrjala@linux.intel.com
2020-10-30drm/i915: Don't enable hpd detection logic from irq_postinstall()Ville Syrjälä1-37/+3
No reason that I can see why we should enable the hpd detection logic already during irq postinstall phase. We don't even do this on all the platforms. We just need it before we actually enable the hotplug interrupts in .hpd_irq_setup(), and in fact we already do it there as well. Let's just eliminate the redundant early setup. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-15-ville.syrjala@linux.intel.com Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
2020-10-30drm/i915: Split gen11_hpd_detection_setup() into tc vs. tbt variantsVille Syrjälä1-3/+10
No reason to stuff both type-c and tbt into the same function. Let's split this so we may more easily handle platforms that lack the tbt spefific bits. Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-14-ville.syrjala@linux.intel.com
2020-10-30drm/i915: Relocate intel_hpd_{enabled,hotplug}_irqs()Ville Syrjälä1-25/+25
Move intel_hpd_{enabled,hotplug}_irqs() closes to the beginning of the file so we can use them in more places. No functional changes. Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-13-ville.syrjala@linux.intel.com
2020-10-30drm/i915: s/tc_port/hpd_pin/ in icp+ TC hotplug bitsVille Syrjälä1-15/+15
Parametrize the icp+ TC HPD bits using hpd_pin rather than tc_port so it's clear what kind of an animal we're dealing with. Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-12-ville.syrjala@linux.intel.com
2020-10-30drm/i915: s/tc_port/hpd_pin/ in GEN11_{TC,TBT}_HOTPLUG()Ville Syrjälä1-24/+24
Use hpd_pin instead of tc_port in the GEN11_{TC,TBT}_HOTPLUG() to make it clear what they refer to. Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-11-ville.syrjala@linux.intel.com
2020-10-30drm/i915: s/port/hpd_pin/ for icp+ ddi hpd bitsVille Syrjälä1-11/+11
Use hpd_pin instead of port in the parametrized ICP+ DDI HPD macros. Makes it clear what these refer to. v2: Handle DG1 Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-10-ville.syrjala@linux.intel.com
2020-10-30drm/i915: Introduce GEN8_DE_PORT_HOTPLUG()Ville Syrjälä1-9/+9
Unify the BDW/BXT hotplug bits. BDW only has port A, but that matches BXT port A so we can shar the same macro for both. v2: Remember the gvt Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-9-ville.syrjala@linux.intel.com
2020-10-30drm/i915: Parametrize BXT_DE_PORT_HP_DDI with hpd_pinVille Syrjälä1-6/+6
Use hpd_pin to parametrize BXT_DE_PORT_HP_DDI() to make it clear these have nothing to do with DDI ports or PHYs as such. The only thing that matters is the HPD pin assignment. v2: Remember the gvt Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-8-ville.syrjala@linux.intel.com
2020-10-30drm/i915: s/PORT_TC/TC_PORT_/Ville Syrjälä1-39/+39
Make the namespacing for enum tc_port better by adding the TC_ to the actual enum values. v2: Drop the extra TC (Lucas) Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-2-ville.syrjala@linux.intel.com
2020-10-23drm/i915/dg1: invert HPD pinsClinton A Taylor1-0/+9
HPD pins are inverted for DG1 platform. Bspec: 49956 Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Clinton A Taylor <clinton.a.taylor@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201021082034.3170478-3-lucas.demarchi@intel.com
2020-10-23drm/i915/dg1: add hpd interrupt handlingLucas De Marchi1-6/+31
DG1 has one more combo phy port, no TC and all irq handling goes through SDE, like for MCC. v2: Also change intel_hpd_pin_default() to include DG1 mapping v3, v4: Rebase on hpd refactor Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Anshuman Gupta <anshuman.gupta@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201021082034.3170478-2-lucas.demarchi@intel.com
2020-10-22drm/i915: Reset the interrupt mask on disabling interruptsChris Wilson1-5/+7
As we disable the interrupt during suspend, also reset the irq_mask to short-circuit subsystems that later try to turn off their interrupt source. <4>[ 101.816730] i915 0000:00:02.0: drm_WARN_ON(!intel_irqs_enabled(dev_priv)) <4>[ 101.816853] WARNING: CPU: 3 PID: 4241 at drivers/gpu/drm/i915/i915_irq.c:343 ilk_update_display_irq+0xb3/0x130 [i915] v2: Reset irq_mask for i8xx_irq_reset as well, and split patch to focus on only i915->irq_mask Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201022114246.28566-1-chris@chris-wilson.co.uk
2020-10-21drm/i915: Clean up the irq enable/disable for ilk rpsVille Syrjälä1-12/+4
Let's unmask the PCU event irq _after_ we've set up the hardware and software to deal with the fallout. We can also drop the PCU event bit from DEIER except when we need it for rps. And on the disable side we replace the hand rolled (and unlocked) DEIER/IIR/IMR frobbing with ilk_disable_display_irq(). Ocd does require me to reorder it to be symmetric with the enable path however. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201021131443.25616-5-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2020-10-21drm/i915: Do gen5_gt_irq_postinstall() before enabling the master interruptVille Syrjälä1-2/+2
Let's make sure the lower level interrupt bits are all lined up before we flip on the master interrupt. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201021131443.25616-4-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2020-09-28drm/i915/dsi: Enable software vblank counterVandita Kulkarni1-0/+4
In case of DSI cmd mode, we get hw vblank counter updated after the TE comes in, if we try to read the hw vblank counter in te handler we wouldnt have the udpated vblank counter yet. This will lead to a state where we would send the vblank event to the user space in the next te, though the frame update would have completed in the first TE duration itself. Hence switch to using software timestamp based vblank counter. v2: Use mode_flags from crtc_state (Ville) Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200924124209.17916-6-vandita.kulkarni@intel.com
2020-09-28drm/i915/dsi: Add TE handler for dsi cmd mode.Vandita Kulkarni1-0/+65
In case of dual link, we get the TE on slave. So clear the TE on slave DSI IIR. If we are operating in TE_GATE mode, after we do a frame update, the transcoder will send the frame data to the panel, after it receives a TE. Whereas if we are operating in NO_GATE mode then the transcoder will immediately send the frame data to the panel. We are not dealing with the periodic command mode here. v2: Pass only relevant masked bits to the handler (Jani) v3: Fix the check for cmd mode in TE handler function. v4: Use intel_handle_vblank instead of drm_handle_vblank (Jani) v3: Use static on handler func (Jani) Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200924124209.17916-4-vandita.kulkarni@intel.com
2020-09-28i915/dsi: Configure TE interrupt for cmd modeVandita Kulkarni1-2/+48
Configure TE interrupt as part of the vblank enable call flow. v2: Hide the private flags check inside configure_te (Jani) v3: Fix the position of masking de_port_masked for DSI_TE. v4: Simplify the caller of configure_te (Jani) v5: Clear IIR, remove the usage of private_flags v6: including icl_dsi header is not needed Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200924124209.17916-3-vandita.kulkarni@intel.com
2020-09-28drm/i915: Add enable/disable flip done and flip done handlerKarthik B S1-0/+52
Add enable/disable flip done functions and the flip done handler function which handles the flip done interrupt. Enable the flip done interrupt in IER. Enable flip done function is called before writing the surface address register as the write to this register triggers the flip done interrupt Flip done handler is used to send the page flip event as soon as the surface address is written as per the requirement of async flips. The interrupt is disabled after the event is sent. v2: -Change function name from icl_* to skl_* (Paulo) -Move flip handler to this patch (Paulo) -Remove vblank_put() (Paulo) -Enable flip done interrupt for gen9+ only (Paulo) -Enable flip done interrupt in power_well_post_enable hook (Paulo) -Removed the event check in flip done handler to handle async flips without pageflip events. v3: -Move skl_disable_flip_done out of interrupt handler (Paulo) -Make the pending vblank event NULL in the beginning of flip_done_handler to remove sporadic WARN_ON that is seen. v4: -Calculate timestamps using flip done time stamp and current timestamp for async flips (Ville) v5: -Fix the sparse warning by making the function 'g4x_get_flip_counter' static.(Reported-by: kernel test robot <lkp@intel.com>) -Fix the typo in commit message. v6: -Revert back to old time stamping code. -Remove the break while calling skl_enable_flip_done. (Paulo) v7: -Rebased. v8: -Rebased. v9: -Use struct drm_i915_private *i915 in new code. (Ville) -Use intel_crtc instead of drm_crtc. (Ville) -Do not mix the flip done and vblank hooks. (Ville) v10: -Rebased. Signed-off-by: Karthik B S <karthik.b.s@intel.com> Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200921110210.21182-2-karthik.b.s@intel.com
2020-09-15drm/i915: Introduce intel_hpd_hotplug_irqs()Ville Syrjälä1-27/+23
Introduce intel_hpd_hotplug_irqs() as a partner to intel_hpd_enabled_irqs(). There's no need to care about the encoders which we're not exposing, so we can avoid hardcoding the masks in various places. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200630215601.28557-12-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-11 09:19:19 +0000