summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/i915/i915_gem_execbuffer.c
AgeCommit message (Collapse)AuthorFilesLines
2019-02-07drm/i915: Hack and slash, throttle execbuffer hogsChris Wilson1-0/+67
Apply backpressure to hogs that emit requests faster than the GPU can process them by waiting for their ring to be less than half-full before proceeding with taking the struct_mutex. This is a gross hack to apply throttling backpressure, the long term goal is to remove the struct_mutex contention so that each client naturally waits, preferably in an asynchronous, nonblocking fashion (pipelined operations for the win), for their own resources and never blocks another client within the driver at least. (Realtime priority goals would extend to ensuring that resource contention favours high priority clients as well.) This patch only limits excessive request production and does not attempt to throttle clients that block waiting for eviction (either global GTT or system memory) or any other global resources, see above for the long term goal. No microbenchmarks are harmed (to the best of my knowledge). Testcase: igt/gem_exec_schedule/pi-ringfull-* Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190207071829.5574-1-chris@chris-wilson.co.uk
2019-01-29drm/i915: Identify active requestsChris Wilson1-0/+12
To allow requests to forgo a common execution timeline, one question we need to be able to answer is "is this request running?". To track whether a request has started on HW, we can emit a breadcrumb at the beginning of the request and check its timeline's HWSP to see if the breadcrumb has advanced past the start of this request. (This is in contrast to the global timeline where we need only ask if we are on the global timeline and if the timeline has advanced past the end of the previous request.) There is still confusion from a preempted request, which has already started but relinquished the HW to a high priority request. For the common case, this discrepancy should be negligible. However, for identification of hung requests, knowing which one was running at the time of the hang will be much more important. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190129185452.20989-2-chris@chris-wilson.co.uk
2019-01-14drm/i915/gem: Track the rpm wakerefsChris Wilson1-2/+3
Keep track of the temporary rpm wakerefs used for user access to the device, so that we can cancel them upon release and clearly identify any leaks. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-10-chris@chris-wilson.co.uk
2019-01-14drm/i915: Markup paired operations on wakerefsChris Wilson1-1/+1
The majority of runtime-pm operations are bounded and scoped within a function; these are easy to verify that the wakeref are handled correctly. We can employ the compiler to help us, and reduce the number of wakerefs tracked when debugging, by passing around cookies provided by the various rpm_get functions to their rpm_put counterpart. This makes the pairing explicit, and given the required wakeref cookie the compiler can verify that we pass an initialised value to the rpm_put (quite handy for double checking error paths). For regular builds, the compiler should be able to eliminate the unused local variables and the program growth should be minimal. Fwiw, it came out as a net improvement as gcc was able to refactor rpm_get and rpm_get_if_in_use together, v2: Just s/rpm_put/rpm_put_unchecked/ everywhere, leaving the manual mark up for smaller more targeted patches. v3: Mention the cookie in Returns Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-2-chris@chris-wilson.co.uk
2019-01-09drm/i915: drop all drmP.h includesJani Nikula1-1/+0
Needs just a few additional includes here and there. Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190108082709.3748-1-jani.nikula@intel.com
2019-01-08Merge drm/drm-next into drm-intel-next-queuedJani Nikula1-8/+20
Generally catch up with 5.0-rc1, and specifically get the changes: 96d4f267e40f ("Remove 'type' argument from access_ok() function") 0b2c8f8b6b0c ("i915: fix missing user_access_end() in page fault exception case") 594cc251fdd0 ("make 'user_access_begin()' do 'access_ok()'") Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-01-04make 'user_access_begin()' do 'access_ok()'Linus Torvalds1-2/+13
Originally, the rule used to be that you'd have to do access_ok() separately, and then user_access_begin() before actually doing the direct (optimized) user access. But experience has shown that people then decide not to do access_ok() at all, and instead rely on it being implied by other operations or similar. Which makes it very hard to verify that the access has actually been range-checked. If you use the unsafe direct user accesses, hardware features (either SMAP - Supervisor Mode Access Protection - on x86, or PAN - Privileged Access Never - on ARM) do force you to use user_access_begin(). But nothing really forces the range check. By putting the range check into user_access_begin(), we actually force people to do the right thing (tm), and the range check vill be visible near the actual accesses. We have way too long a history of people trying to avoid them. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04i915: fix missing user_access_end() in page fault exception caseLinus Torvalds1-0/+1
When commit fddcd00a49e9 ("drm/i915: Force the slow path after a user-write error") unified the error handling for various user access problems, it didn't do the user_access_end() that is needed for the unsafe_put_user() case. It's not a huge deal: a missed user_access_end() will only mean that SMAP protection isn't active afterwards, and for the error case we'll be returning to user mode soon enough anyway. But it's wrong, and adding the proper user_access_end() is trivial enough (and doing it for the other error cases where it isn't needed doesn't hurt). I noticed it while doing the same prep-work for changing user_access_begin() that precipitated the access_ok() changes in commit 96d4f267e40f ("Remove 'type' argument from access_ok() function"). Fixes: fddcd00a49e9 ("drm/i915: Force the slow path after a user-write error") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: stable@kernel.org # v4.20 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03Remove 'type' argument from access_ok() functionLinus Torvalds1-3/+3
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-01Merge tag 'iommu-updates-v4.21' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - Page table code for AMD IOMMU now supports large pages where smaller page-sizes were mapped before. VFIO had to work around that in the past and I included a patch to remove it (acked by Alex Williamson) - Patches to unmodularize a couple of IOMMU drivers that would never work as modules anyway. - Work to unify the the iommu-related pointers in 'struct device' into one pointer. This work is not finished yet, but will probably be in the next cycle. - NUMA aware allocation in iommu-dma code - Support for r8a774a1 and r8a774c0 in the Renesas IOMMU driver - Scalable mode support for the Intel VT-d driver - PM runtime improvements for the ARM-SMMU driver - Support for the QCOM-SMMUv2 IOMMU hardware from Qualcom - Various smaller fixes and improvements * tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (78 commits) iommu: Check for iommu_ops == NULL in iommu_probe_device() ACPI/IORT: Don't call iommu_ops->add_device directly iommu/of: Don't call iommu_ops->add_device directly iommu: Consolitate ->add/remove_device() calls iommu/sysfs: Rename iommu_release_device() dmaengine: sh: rcar-dmac: Use device_iommu_mapped() xhci: Use device_iommu_mapped() powerpc/iommu: Use device_iommu_mapped() ACPI/IORT: Use device_iommu_mapped() iommu/of: Use device_iommu_mapped() driver core: Introduce device_iommu_mapped() function iommu/tegra: Use helper functions to access dev->iommu_fwspec iommu/qcom: Use helper functions to access dev->iommu_fwspec iommu/of: Use helper functions to access dev->iommu_fwspec iommu/mediatek: Use helper functions to access dev->iommu_fwspec iommu/ipmmu-vmsa: Use helper functions to access dev->iommu_fwspec iommu/dma: Use helper functions to access dev->iommu_fwspec iommu/arm-smmu: Use helper functions to access dev->iommu_fwspec ACPI/IORT: Use helper functions to access dev->iommu_fwspec iommu: Introduce wrappers around dev->iommu_fwspec ...
2018-12-25Merge tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-1/+1
Pull drm updates from Dave Airlie: "Core: - shared fencing staging removal - drop transactional atomic helpers and move helpers to new location - DP/MST atomic cleanup - Leasing cleanups and drop EXPORT_SYMBOL - Convert drivers to atomic helpers and generic fbdev. - removed deprecated obj_ref/unref in favour of get/put - Improve dumb callback documentation - MODESET_LOCK_BEGIN/END helpers panels: - CDTech panels, Banana Pi Panel, DLC1010GIG, - Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA, - Himax HX8357D, simulated RTSM AEMv8. - GPD Win2 panel - AUO G101EVN010 vgem: - render node support ttm: - move global init out of drivers - fix LRU handling for ghost objects - Support for simultaneous submissions to multiple engines scheduler: - timeout/fault handling changes to help GPU recovery - helpers for hw with preemption support i915: - Scaler/Watermark fixes - DP MST + powerwell fixes - PSR fixes - Break long get/put shmemfs pages - Icelake fixes - Icelake DSI video mode enablement - Engine workaround improvements amdgpu: - freesync support - GPU reset enabled on CI, VI, SOC15 dGPUs - ABM support in DC - KFD support for vega12/polaris12 - SDMA paging queue on vega - More amdkfd code sharing - DCC scanout on GFX9 - DC kerneldoc - Updated SMU firmware for GFX8 chips - XGMI PSP + hive reset support - GPU reset - DC trace support - Powerplay updates for newer Polaris - Cursor plane update fast path - kfd dma-buf support virtio-gpu: - add EDID support vmwgfx: - pageflip with damage support nouveau: - Initial Turing TU104/TU106 modesetting support msm: - a2xx gpu support for apq8060 and imx5 - a2xx gpummu support - mdp4 display support for apq8060 - DPU fixes and cleanups - enhanced profiling support - debug object naming interface - get_iova/page pinning decoupling tegra: - Tegra194 host1x, VIC and display support enabled - Audio over HDMI for Tegra186 and Tegra194 exynos: - DMA/IOMMU refactoring - plane alpha + blend mode support - Color format fixes for mixer driver rcar-du: - R8A7744 and R8A77470 support - R8A77965 LVDS support imx: - fbdev emulation fix - multi-tiled scalling fixes - SPDX identifiers rockchip - dw_hdmi support - dw-mipi-dsi + dual dsi support - mailbox read size fix qxl: - fix cursor pinning vc4: - YUV support (scaling + cursor) v3d: - enable TFU (Texture Formatting Unit) mali-dp: - add support for linear tiled formats sun4i: - Display Engine 3 support - H6 DE3 mixer 0 support - H6 display engine support - dw-hdmi support - H6 HDMI phy support - implicit fence waiting - BGRX8888 support meson: - Overlay plane support - implicit fence waiting - HDMI 1.4 4k modes bridge: - i2c fixes for sii902x" * tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drm: (1403 commits) drm/amd/display: Add fast path for cursor plane updates drm/amdgpu: Enable GPU recovery by default for CI drm/amd/display: Fix duplicating scaling/underscan connector state drm/amd/display: Fix unintialized max_bpc state values Revert "drm/amd/display: Set RMX_ASPECT as default" drm/amdgpu: Fix stub function name drm/msm/dpu: Fix clock issue after bind failure drm/msm/dpu: Clean up dpu_media_info.h static inline functions drm/msm/dpu: Further cleanups for static inline functions drm/msm/dpu: Cleanup the debugfs functions drm/msm/dpu: Remove dpu_irq and unused functions drm/msm: Make irq_postinstall optional drm/msm/dpu: Cleanup callers of dpu_hw_blk_init drm/msm/dpu: Remove unused functions drm/msm/dpu: Remove dpu_crtc_is_enabled() drm/msm/dpu: Remove dpu_crtc_get_mixer_height drm/msm/dpu: Remove dpu_dbg drm/msm: dpu: Remove crtc_lock drm/msm: dpu: Remove vblank_requested flag from dpu_crtc drm/msm: dpu: Separate crtc assignment from vblank enable ...
2018-12-12drm/i915: replace IS_GEN<N> with IS_GEN(..., N)Lucas De Marchi1-2/+2
Define IS_GEN() similarly to our IS_GEN_RANGE(). but use gen instead of gen_mask to do the comparison. Now callers can pass then gen as a parameter, so we don't require one macro for each gen. The following spatch was used to convert the users of these macros: @@ expression e; @@ ( - IS_GEN2(e) + IS_GEN(e, 2) | - IS_GEN3(e) + IS_GEN(e, 3) | - IS_GEN4(e) + IS_GEN(e, 4) | - IS_GEN5(e) + IS_GEN(e, 5) | - IS_GEN6(e) + IS_GEN(e, 6) | - IS_GEN7(e) + IS_GEN(e, 7) | - IS_GEN8(e) + IS_GEN(e, 8) | - IS_GEN9(e) + IS_GEN(e, 9) | - IS_GEN10(e) + IS_GEN(e, 10) | - IS_GEN11(e) + IS_GEN(e, 11) ) v2: use IS_GEN rather than GT_GEN and compare to info.gen rather than using the bitmask Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181212181044.15886-2-lucas.demarchi@intel.com
2018-12-12drm/i915: Flush GPU relocs harder for gen3Chris Wilson1-6/+1
Adding an extra MI_STORE_DWORD_IMM to the gpu relocation path for gen3 was good, but still not good enough. To survive 24+ hours under test we needed to perform not one, not two but three extra store-dw. Doing so for each GPU relocation was a little unsightly and since we need to worry about userspace hitting the same issues, we should apply the dummy store-dw into the EMIT_FLUSH. Fixes: 7dd4f6729f92 ("drm/i915: Async GPU relocation processing") References: 7fa28e146994 ("drm/i915: Write GPU relocs harder with gen3") Testcase: igt/gem_tiled_fence_blits # blb/pnv Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181207134037.11848-1-chris@chris-wilson.co.uk (cherry picked from commit a889580c087a9cf91fddb3832ece284174214183) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-12-07drm/i915: Flush GPU relocs harder for gen3Chris Wilson1-6/+1
Adding an extra MI_STORE_DWORD_IMM to the gpu relocation path for gen3 was good, but still not good enough. To survive 24+ hours under test we needed to perform not one, not two but three extra store-dw. Doing so for each GPU relocation was a little unsightly and since we need to worry about userspace hitting the same issues, we should apply the dummy store-dw into the EMIT_FLUSH. Fixes: 7dd4f6729f92 ("drm/i915: Async GPU relocation processing") References: 7fa28e146994 ("drm/i915: Write GPU relocs harder with gen3") Testcase: igt/gem_tiled_fence_blits # blb/pnv Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181207134037.11848-1-chris@chris-wilson.co.uk
2018-12-05drm: revert "expand replace_fence to support timeline point v2"Christian König1-1/+1
This reverts commit 9a09a42369a4a37a959c051d8e1a1f948c1529a4. The whole interface isn't thought through. Since this function can't fail we actually can't allocate an object to store the sync point. Sorry, I should have taken the lead on this from the very beginning and reviewed it more thoughtfully. Going to propose a new interface as a follow up change. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Link: https://patchwork.freedesktop.org/patch/265580/
2018-11-29Merge tag 'drm-intel-next-2018-11-22' of ↵Dave Airlie1-1/+6
git://anongit.freedesktop.org/drm/drm-intel into drm-next Changes outside i915: - Connector property to limit max bpc (Radhakrishna) - Fix LPE audio runtime PM and deinit (Ville) - DP FEC prep work (Anusha) - Mark pinned shmemfs pages as unevictable (Kuo-Hsin) - Backmerge drm-next (Jani) Inside i915: - Revert OA UAPI change that lacks userspace (Joonas) - Register macro cleanup (Jani) - 32-bit build fixes on pin flags (Chris) - Fix MG DP mode and PHY gating for HDMI (Imre) - DP MST race, hpd and irq fixes (Lyude) - Combo PHY fixes and cleanup (Imre, Lucas) - Move display init and cleanup under modeset init and cleanup (José) - PSR fixes (José) - Subslice size fixes (Daniele) - Abstract and clean up fixed point helpers (Jani) - Plane input CSC for YUV to RGB conversion (Uma) - Break long iterations for get/put shmemfs pages (Chris) - Improve DDI encoder hw state readout sanity checks (Imre) - Fix power well leaks for MST (José) - Scaler fixes (Ville) - Watermark fixes (Ville) - Fix VLV/CHV DSI panel orientation readout (Ville) - ICL rawclock fixes (Paulo) - Workaround DMC power well request issues (Imre) - Plane allocation fix (Maarten) - Transcoder enum value/ordering robustness fixes (Imre) - UTS_RELEASE build dependency fix (Hans Holmberg) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87k1l4cesj.fsf@intel.com
2018-11-22Merge tag 'drm-misc-next-2018-11-21' of ↵Dave Airlie1-1/+1
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v4.21, part 2: UAPI Changes: - Remove syncobj timeline support from drm. Cross-subsystem Changes: - Document canvas provider node in the DT bindings. - Improve documentation for TPO TPG110 DT bindings. Core Changes: - Use explicit state in drm atomic functions. - Add panel quirk for new GPD Win2 firmware. - Add DRM_FORMAT_XYUV8888. - Set the default import/export function in prime to drm_gem_prime_import/export. - Add a separate drm_gem_object_funcs, to stop relying on dev->driver->*gem* functions. - Make sure that tinydrm sets the virtual address also on imported buffers. Driver Changes: - Support active-low data enable signal in sun4i. - Fix scaling in vc4. - Use canvas provider node in meson. - Remove unused variables in sti and qxl and cirrus. - Add overlay plane support and primary plane scaling to meson. - i2c fixes in drm/bridge/sii902x - Fix mailbox read size in rockchip. - Spelling fix in panel/s6d16d0. - Remove unnecessary null check from qxl_bo_unref. - Remove unused arguments from qxl_bo_pin. - Fix qxl cursor pinning. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/9c0409e3-a85f-d2af-b4eb-baf1eb8bbae4@linux.intel.com
2018-11-21drm/i915: Write GPU relocs harder with gen3Chris Wilson1-1/+6
Under moderate amounts of GPU stress, we can observe on Bearlake and Pineview (later gen3 models) that we execute the following batch buffer before the write into the batch is coherent. Adding extra (tested with upto 32x) MI_FLUSH to either the invalidation, flush or both phases does not solve the incoherency issue with the relocations, but emitting the MI_STORE_DWORD_IMM twice does. So be it. Fixes: 7dd4f6729f92 ("drm/i915: Async GPU relocation processing") Testcase: igt/gem_tiled_fence_blits # blb/pnv Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181119154153.15327-1-chris@chris-wilson.co.uk (cherry picked from commit 7fa28e146994da1e8a4124623d7da97b798ea520) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-20Merge drm/drm-next into drm-intel-next-queuedJani Nikula1-1/+1
Pull in v4.20-rc3 via drm-next. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-11-20drm/i915: Write GPU relocs harder with gen3Chris Wilson1-1/+6
Under moderate amounts of GPU stress, we can observe on Bearlake and Pineview (later gen3 models) that we execute the following batch buffer before the write into the batch is coherent. Adding extra (tested with upto 32x) MI_FLUSH to either the invalidation, flush or both phases does not solve the incoherency issue with the relocations, but emitting the MI_STORE_DWORD_IMM twice does. So be it. Fixes: 7dd4f6729f92 ("drm/i915: Async GPU relocation processing") Testcase: igt/gem_tiled_fence_blits # blb/pnv Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181119154153.15327-1-chris@chris-wilson.co.uk
2018-11-19Merge tag 'drm-misc-next-2018-11-07' of ↵Dave Airlie1-1/+1
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v4.21, part 1: UAPI Changes: - Add syncobj timeline support to drm. Cross-subsystem Changes: - Remove shared fence staging in dma-buf's fence object, and allow reserving more than 1 fence and add more paranoia when debugging. - Constify infoframe functions in video/hdmi. Core Changes: - Add vkms todo, and a lot of assorted doc fixes. - Drop transitional helpers and convert drivers to use drm_atomic_helper_shutdown(). - Move atomic state helper functions to drm_atomic_state_helper.[ch] - Refactor drm selftests, and add new tests. - DP MST atomic state cleanups. - Drop EXPORT_SYMBOL from drm leases. - Lease cleanups and fixes. - Create render node for vgem. Driver Changes: - Fix build failure in imx without fbdev emulation. - Add rotation quirk for GPD win2 panel. - Add support for various CDTech panels, Banana Pi Panel, DLC1010GIG, Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA, Himax HX8357D, simulated RTSM AEMv8. - Add dw_hdmi support to rockchip driver. - Fix YUV support in vc4. - Fix resource id handling in virtio. - Make rockchip use dw-mipi-dsi bridge driver, and add dual dsi support. - Advertise that tinydrm only supports DRM_FORMAT_MOD_LINEAR. - Convert many drivers to use atomic helpers, and drm_fbdev_generic_setup(). - Add Mali linear tiled formats, and enable them in the Mali-DP driver. - Add support for H6 DE3 mixer 0, DW HDMI, HDMI PHY and TCON TOP. - Assorted driver cleanups and fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/be7ebd91-edd9-8fa4-4286-1c57e3165113@linux.intel.com
2018-11-12drm/syncobj: Fix compilation following partial revertChris Wilson1-1/+1
We need to include the revert of commit 783195ec1cad ("drm/syncobj: disable the timeline UAPI for now v2") along with undoing the change to drm/i915. Fixes: 131280a162e7 ("drm: Revert syncobj timeline changes.") Cc: Christian König <christian.koenig@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Chunming Zhou <david1.zhou@amd.com> Cc: Eric Anholt <eric@anholt.net> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181112152130.12275-1-chris@chris-wilson.co.uk
2018-11-12iommu/vtd: Cleanup dma_remapping.h headerLu Baolu1-1/+1
Commit e61d98d8dad00 ("x64, x2apic/intr-remap: Intel vt-d, IOMMU code reorganization") moved dma_remapping.h from drivers/pci/ to current place. It is entirely VT-d specific, but uses a generic name. This merges dma_remapping.h with include/linux/intel-iommu.h and removes dma_remapping.h as the result. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Sohil Mehta <sohil.mehta@intel.com> Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Liu, Yi L <yi.l.liu@intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-11-06drm/i915: Compare user's 64b GTT offset even on 32bChris Wilson1-1/+1
Beware mixing unsigned long constants and 64b values, as on 32b the constant will be zero extended and discard the high 32b when used as a mask! Reported-by: Sergii Romantsov <sergii.romantsov@globallogic.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108282 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181025091823.20571-2-chris@chris-wilson.co.uk (cherry picked from commit 6fc4e48f9ed46e9adff236a0c350074aafa3b7fa) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-10-26drm/i915: Compare user's 64b GTT offset even on 32bChris Wilson1-1/+1
Beware mixing unsigned long constants and 64b values, as on 32b the constant will be zero extended and discard the high 32b when used as a mask! Reported-by: Sergii Romantsov <sergii.romantsov@globallogic.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108282 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181025091823.20571-2-chris@chris-wilson.co.uk
2018-10-24Merge drm/drm-next into drm-misc-nextSean Paul1-1/+6
4.19 is out, Lyude asked for a backmerge, and it's been a while. All very good reasons on their own :-) Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-10-18drm: add syncobj timeline support v9Chunming Zhou1-1/+1
This patch is for VK_KHR_timeline_semaphore extension, semaphore is called syncobj in kernel side: This extension introduces a new type of syncobj that has an integer payload identifying a point in a timeline. Such timeline syncobjs support the following operations: * CPU query - A host operation that allows querying the payload of the timeline syncobj. * CPU wait - A host operation that allows a blocking wait for a timeline syncobj to reach a specified value. * Device wait - A device operation that allows waiting for a timeline syncobj to reach a specified value. * Device signal - A device operation that allows advancing the timeline syncobj to a specified value. v1: Since it's a timeline, that means the front time point(PT) always is signaled before the late PT. a. signal PT design: Signal PT fence N depends on PT[N-1] fence and signal opertion fence, when PT[N] fence is signaled, the timeline will increase to value of PT[N]. b. wait PT design: Wait PT fence is signaled by reaching timeline point value, when timeline is increasing, will compare wait PTs value with new timeline value, if PT value is lower than timeline value, then wait PT will be signaled, otherwise keep in list. syncobj wait operation can wait on any point of timeline, so need a RB tree to order them. And wait PT could ahead of signal PT, we need a sumission fence to perform that. v2: 1. remove unused DRM_SYNCOBJ_CREATE_TYPE_NORMAL. (Christian) 2. move unexposed denitions to .c file. (Daniel Vetter) 3. split up the change to drm_syncobj_find_fence() in a separate patch. (Christian) 4. split up the change to drm_syncobj_replace_fence() in a separate patch. 5. drop the submission_fence implementation and instead use wait_event() for that. (Christian) 6. WARN_ON(point != 0) for NORMAL type syncobj case. (Daniel Vetter) v3: 1. replace normal syncobj with timeline implemenation. (Vetter and Christian) a. normal syncobj signal op will create a signal PT to tail of signal pt list. b. normal syncobj wait op will create a wait pt with last signal point, and this wait PT is only signaled by related signal point PT. 2. many bug fix and clean up 3. stub fence moving is moved to other patch. v4： 1. fix RB tree loop with while(node=rb_first(...)). (Christian) 2. fix syncobj lifecycle. (Christian) 3. only enable_signaling when there is wait_pt. (Christian) 4. fix timeline path issues. 5. write a timeline test in libdrm v5: (Christian) 1. semaphore is called syncobj in kernel side. 2. don't need 'timeline' characters in some function name. 3. keep syncobj cb. v6: (Christian) 1. merge syncobj_timeline to syncobj structure. 2. simplify some check sentences. 3. some misc change. 4. fix CTS failed issue. v7: (Christian) 1. error handling when creating signal pt. 2. remove timeline naming in func. 3. export flags in find_fence. 4. allow reset timeline. v8: 1. use wait_event_interruptible without timeout 2. rename _TYPE_INDIVIDUAL to _TYPE_BINARY v9: 1. rename signal_pt->base to signal_pt->fence_array to avoid misleading 2. improve kerneldoc individual syncobj is tested by ./deqp-vk -n dEQP-VK*semaphore* timeline syncobj is tested by ./amdgpu_test -s 9 Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Cc: Christian Konig <christian.koenig@amd.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Daniel Rakos <Daniel.Rakos@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Cc: Jason Ekstrand <jason@jlekstrand.net> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/257258/
2018-09-28Merge tag 'drm-intel-next-2018-09-21' of ↵Dave Airlie1-1/+6
git://anongit.freedesktop.org/drm/drm-intel into drm-next Driver Changes: - Bugzilla 107600: Fix stuttering video playback on MythTV on old hardware (Chris) - Avoid black screen when using CSC coefficient matrix (Raviraj) - Hammer PDs on Baytrail to make sure they reload (Chris) - Capture some objects if unable to capture all, on error (Chris) - Add W/A for 16 GB DIMMs on SKL+ (Mahesh) - Only enable IPC for symmetric memory configurations on KBL+ (Mahesh) - Assume pipe A to have maximum stride limits (Ville) - Always update update OA contexts via context image (Tvrtko) - Icelake enabling patches (Madhav, Dhinakaran) - Add Icelake DMC firmware (Anusha) - Fixes for CI found corner cases (Chris) - Limit the backpressure for request allocation (Chris) - Park GPU on module load so usage starts from known state (Chris) - Flush tasklet when checking for idle (Chris) - Use coherent write into the context image on BSW+ (Chris) - Fix possible integer overflow for framebuffers that get aligned past 4GiB (Ville) - Downgrade fence timeout from warn to notice and add debug hint (Chris) - Fixes to multi function encoder code (Ville) - Fix sprite plane check logic (Dan, Ville) - PAGE_SIZE vs. I915_GTT_PAGE_SIZE fixes (Ville) - Decode memory bandwidth and parameters for BXT and SKL+ (Mahesh) - Overwrite BIOS set IPC value from KMS (Mahesh) - Multiple pipe handling code cleanups/restructurings/optimizations (Ville) - Spare low 4G address for non-48bit objects (Chris) - Free context_setparam of struct_mutex (Chris) - Delay updating ring register state on resume (Chris) - Avoid unnecessarily copying overlay IOCTL parameters (Chris) - Update GuC power domain states even without submission (Michal) - Restore GuC preempt-context across S3/S4 (Chris) - Add kernel selftest for rapid context switching (Chris) - Keep runtime power management ref for live selftests (Chris) - GEM code cleanups (Matt) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180927095933.GA11458@jlahtine-desk.ger.corp.intel.com
2018-09-26Merge drm/drm-next into drm-intel-next-queuedJani Nikula1-1/+1
Catch up in general, and get DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT specifically. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-09-14Merge tag 'drm-misc-next-2018-09-13' of ↵Dave Airlie1-1/+1
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 4.20: UAPI Changes: - Add host endian variants for the most common formats (Gerd) - Fail ADDFB2 for big-endian drivers that don't advertise BE quirk (Gerd) - clear smem_start in fbdev for drm drivers to avoid leaking fb addr (Daniel) Cross-subsystem Changes: Core Changes: - fix drm_mode_addfb() on big endian machines (Gerd) - add timeline point to syncobj find+replace (Chunming) - more drmP.h removal effort (Daniel) - split uapi portions of drm_atomic.c into drm_atomic_uapi.c (Daniel) Driver Changes: - bochs: Convert open-coded portions to use helpers (Peter) - vkms: Add cursor support (Haneen) - udmabuf: Lots of fixups (mostly cosmetic afaict) (Gerd) - qxl: Convert to use fbdev helper (Peter) Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Chunming Zhou <david1.zhou@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Peter Wu <peter@lekensteyn.nl> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20180913130254.GA156437@art_vandelay
2018-09-12drm/i915: Reorder execobject[] to insert non-48b objects into the low 4GChris Wilson1-0/+5
If the caller supplies more than 4G of objects and than one that has to be in the low 4G, it is possible for the low 4G to be full before we attempt to find room for the last object that must be there. As we don't reorder the two types, every pass hits the same problem and we fail with ENOSPC. However, if we impose a little bit of ordering between the two classes of objects, on the second pass we will be able to fit the special object as we do it first. For setups that only use !48b objects, we now reverse the order between passes, hopefully making the subsequent passes more likely to succeed given that we are trying a different order (rather than repeating the previous pass!) v2: Quick one line explanation for the relative priorities given to reservations. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180912101133.31377-1-chris@chris-wilson.co.uk
2018-09-11drm/i915: Nuke struct_mutex from context_setparamChris Wilson1-1/+1
Userspace should be free to race against itself and shoot itself in the foot if it so desires to adjust a parameter at the same time as submitting a batch to that context. As such, the struct_mutex in context setparam is only being used to serialise userspace against itself and not for any protection of internal structs and so is superfluous. v2: Separate user_flags from internal flags to reduce chance of interference; and use locked bit ops for user updates. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180911132206.23032-1-chris@chris-wilson.co.uk
2018-09-06drm: expand replace_fence to support timeline point v2Chunming Zhou1-1/+1
we can place a fence to a timeline point after expanded. v2: change func parameter order Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/246543/
2018-09-03drm/i915: Fix up FORCE_GPU_RELOC (debug) to flush CPU write domainsChris Wilson1-0/+7
We currently assert that if the target is in a CPU write domain, we use a CPU reloc path rather than the GPU reloc path. However, we have a debug override to force the GPU path and that unfortunately hits the assert. Include the async clflush under the debug option to ensure correct behaviour even when debugging, and strict when not. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180903150216.19965-1-chris@chris-wilson.co.uk
2018-09-03drm/i915: Force the slow path after a user-write errorChris Wilson1-4/+5
If we fail to write the user relocation back when it is changed, force ourselves to take the slow relocation path where we can handle faults in the write path. There is still an element of dubiousness as having patched up the batch to use the correct offset, it no longer matches the presumed_offset in the relocation, so a second pass may miss any changes in layout. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180903083337.13134-3-chris@chris-wilson.co.uk
2018-09-03drm/i915: Determine uses-full-ppgtt from context for execbufChris Wilson1-3/+6
Rather than inspect the global module parameter for whether full-ppgtt maybe enabled, we can inspect the context directly as to whether it has its own vm. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Bob Paauwe <bob.j.paauwe@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180901092451.7233-1-chris@chris-wilson.co.uk
2018-08-06drm/i915: kill resource streamer supportLucas De Marchi1-15/+3
After disabling resource streamer on ICL (due to it actually not existing there), I got feedback that there have been some experimental patches for mesa to use RS years ago, but nothing ever landed or shipped because there was no performance improvement. This removes it from kernel keeping the uapi defines around for compatibility. v2: - re-add the inadvertent removal of CTX_CTRL_INHIBIT_SYN_CTX_SWITCH - don't bother trying to document removed params on uapi header: applications should know that from the query. (from Chris) v3: - disable CTX_CTRL_RS_CTX_ENABLE istead of removing it - reword commit message after Daniele confirmed no performance regression on his machine - reword commit message to make clear RS is being removed due to never been used v4: - move I915_EXEC_RESOURCE_STREAMER to __I915_EXEC_ILLEGAL_FLAGS so the check on ioctl() is made much earlier by i915_gem_check_execbuffer() (suggested by Tvrtko) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180803232443.17193-1-lucas.demarchi@intel.com
2018-08-06drm/i915/icl: move has_resource_streamer to GEN11_FEATURESLucas De Marchi1-1/+1
Resource streamer has been removed on GEN11 so move it to the FEATURES macro. Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180719170557.10729-1-lucas.demarchi@intel.com
2018-07-06drm/i915: Move i915_vma_move_to_active() to i915_vma.cChris Wilson1-61/+0
i915_vma_move_to_active() has grown beyond its execbuf origins, and should take its rightful place in i915_vma.c as a method for i915_vma! Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180706103947.15919-4-chris@chris-wilson.co.uk
2018-07-06drm/i915: Start returning an error from i915_vma_move_to_active()Chris Wilson1-7/+18
Handling such a late error in request construction is tricky, but to accommodate future patches which may allocate here, we potentially could err. To handle the error after already adjusting global state to track the new request, we must finish and submit the request. But we don't want to use the request as not everything is being tracked by it, so we opt to cancel the commands inside the request. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180706103947.15919-3-chris@chris-wilson.co.uk
2018-07-06drm/i915: Refactor export_fence() after i915_vma_move_to_active()Chris Wilson1-26/+21
Currently all callers are responsible for adding the vma to the active timeline and then exporting its fence. Combine the two operations into i915_vma_move_to_active() to move all the extra handling from the callers to the single site. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180706103947.15919-1-chris@chris-wilson.co.uk
2018-06-21drm/i915: Redefine EINVAL for debuggingChris Wilson1-0/+9
To aide debugging spurious EINVALs, include a debug message every time we emit one from execbuf. References: https://bugs.freedesktop.org/show_bug.cgi?id=106744 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180621080150.8110-1-chris@chris-wilson.co.uk
2018-06-21drm/i915: Ignore applying the self-relocation BIAS if no relocationsChris Wilson1-1/+2
We only need to apply the BIAS for self-relocations into the batchbuffer iff the execobject has any relocations. This suppresses some warnings we may get with a full gtt (so the batch object has wound up at 0 from a previous invocation), but doesn't fix the underlying problem of how we tried to move a pinned batch vma (how we have a pinned user vma outside of execbuf, I do not know, though this being on an aliasing ppgtt means it could be a spurious pinning via the global gtt). One step at a time... References: https://bugs.freedesktop.org/show_bug.cgi?id=106744#c1 Testcase: igt/gem_exec_gttfill # byt (sporadic) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180621073205.26701-1-chris@chris-wilson.co.uk
2018-06-14drm/i915: Make closing request flush mandatoryChris Wilson1-2/+2
For symmetry, simplicity and ensuring the request is always truly idle upon its completion, always emit the closing flush prior to emitting the request breadcrumb. Previously, we would only emit the flush if we had started a user batch, but this just leaves all the other paths open to speculation (do they affect the GPU caches or not?) With mm switching, a key requirement is that the GPU is flushed and invalidated before hand, so for absolute safety, we want that closing flush be mandatory. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180612105135.4459-1-chris@chris-wilson.co.uk
2018-06-11drm/i915: Apply batch location restrictions before pinningChris Wilson1-22/+27
We special case the position of the batch within the GTT to prevent negative self-relocation deltas from underflowing. However, that restriction is being applied after a trial pin of the batch in its current position. Thus we are not rejecting an invalid location if the batch has been used before, leading to an assertion if we happen to need to rearrange the entire payload. In the worst case, this may cause a GPU hang on gen7 or perhaps missing state. References: https://bugs.freedesktop.org/show_bug.cgi?id=105720 Fixes: 2889caa92321 ("drm/i915: Eliminate lots of iterations over the execobjects array") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Martin Peres <martin.peres@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180610194325.13467-2-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-06-05drm/i915/gtt: Rename i915_hw_ppgtt base memberChris Wilson1-8/+8
In the near future, I want to subclass gen6_hw_ppgtt as it contains a few specialised members and I wish to add more. To avoid the ugliness of using ppgtt->base.base, rename the i915_hw_ppgtt base member (i915_address_space) as vm, which is our common shorthand for an i915_address_space local. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180605153758.18422-1-chris@chris-wilson.co.uk
2018-05-04drm/i915: Lazily unbind vma on closeChris Wilson1-1/+2
When userspace is passing around swapbuffers using DRI, we frequently have to open and close the same object in the foreign address space. This shows itself as the same object being rebound at roughly 30fps (with a second object also being rebound at 30fps), which involves us having to rewrite the page tables and maintain the drm_mm range manager every time. However, since the object still exists and it is only the local handle that disappears, if we are lazy and do not unbind the VMA immediately when the local user closes the object but defer it until the GPU is idle, then we can reuse the same VMA binding. We still have to be careful to mark the handle and lookup tables as closed to maintain the uABI, just allowing the underlying VMA to be resurrected if the user is able to access the same object from the same context again. If the object itself is destroyed (neither userspace keeping a handle to it), the VMA will be reaped immediately as usual. In the future, this will be even more useful as instantiating a new VMA for use on the GPU will become heavier. A nuisance indeed, so nip it in the bud. v2: s/__i915_vma_final_close/i915_vma_destroy/ etc. v3: Leave a hint as to why we deferred the unbind on close. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180503195115.22309-1-chris@chris-wilson.co.uk
2018-04-06drm/i915: Describe the bottom of stack in processing a batchbufferKevin Rogovin1-0/+29
Now that "DOC: User command execution" of i915_gem_execbuffer.c is included in the i915.rst, it is benecifial (for new developers) to read what happens at the bottom of the driver stack (in terms of bytes written to be read by the GPU) when processing a user-space batchbuffer. v5: Typo correction of lacking double tick. Signed-off-by: Kevin Rogovin <kevin.rogovin@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> [Joonas: correcting the patch title] Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1523001957-6427-4-git-send-email-kevin.rogovin@intel.com
2018-04-04drm/i915: Do no use kfree() to free a kmem_cache_alloc() return valueXidong Wang1-1/+1
Along the eb_lookup_vmas() error path, the return value from kmem_cache_alloc() was freed using kfree(). Fix it to use the proper kmem_cache_free() instead. Fixes: d1b48c1e7184 ("drm/i915: Replace execbuf vma ht with an idr") Signed-off-by: Xidong Wang <wangxidong_97@163.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: <stable@vger.kernel.org> # v4.14+ Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180404093824.9313-1-chris@chris-wilson.co.uk
2018-02-21drm/i915: Rename drm_i915_gem_request to i915_requestChris Wilson1-30/+30
We want to de-emphasize the link between the request (dependency, execution and fence tracking) from GEM and so rename the struct from drm_i915_gem_request to i915_request. That is we may implement the GEM user interface on top of requests, but they are an abstraction for tracking execution rather than an implementation detail of GEM. (Since they are not tied to HW, we keep the i915 prefix as opposed to intel.) In short, the spatch: @@ @@ - struct drm_i915_gem_request + struct i915_request A corollary to contracting the type name, we also harmonise on using 'rq' shorthand for local variables where space if of the essence and repetition makes 'request' unwieldy. For globals and struct members, 'request' is still much preferred for its clarity. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180221095636.6649-1-chris@chris-wilson.co.uk Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-20 15:49:40 +0000