Age | Commit message (Collapse) | Author | Files | Lines |
|
As different OSes might handling GVT PPGTT creation/destroy notification
differently during a vGPU reset. A better approach is invalidating all
vGPU PPGTT mm objects during vGPU reset.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
This patch provide generic page_track infrastructure for write-protected
guest page. The old page_track logic gets rewrote and now stays in a new
standalone page_track.c. This page track infrastructure can be both used
by vGUC and GTT shadowing.
The important change is that it uses radix tree instead of hash table.
We don't have a predictable number of pages that will be tracked.
Here is some performance data (duration in us) of looking up a element:
Before: (aka. intel_vgpu_find_tracked_page)
0.091 0.089 0.090 ... 0.093 0.091 0.087 ... 0.292 0.285 0.292 0.291
After: (aka. intel_vgpu_find_page_track)
0.104 0.105 0.100 0.102 0.102 0.100 ... 0.101 0.101 0.105 0.105
The hash table has good performance at beginning, but turns bad with
more pages being tracked even no 3D applications are running. As
expected, radix tree has stable duration and very quick.
The overall benchmark (tested with Heaven Benchmark) marginally improved
since this is not the bottleneck. What we benefit more from this change
is scalability.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Using per engine ops will be more flexible, here refine sub-ops(init,
clean) as per engine operation align with reset operation. This change also
will be used in next fix patch for VM engine reset.
Cc: Fred Gao <fred.gao@intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Stop irq timer for virtual vblank timer emulation if no vGPU exists,
otherwise it will keep gvt service thread busy to handle virtual vblank
but no use.
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We had previous hack that tried to accept either i915_reg_t or offset
value to access vGPU virtual/shadow regs which broke that purpose to
be type safe in context. This one trys to explicitly separate the usage
of typed mmio reg with real offset.
Old vgpu_vreg(offset) helper is used only for offset now with new
vgpu_vreg_t(reg) is used for i915_reg_t only. Convert left usage
of that to new helper.
Also fixed left KASAN warning issues caused by previous hack.
v2: rebase, fixup against recent mmio switch change
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
This patch introduces a guest's framebuffer sharing mechanism based on
dma-buf subsystem. With this sharing mechanism, guest's framebuffer can
be shared between guest VM and host.
v17:
- modify VFIO_DEVICE_GET_GFX_DMABUF interface. (Alex)
v16:
- add x_hot and y_hot. (Gerd)
- add flag validation for VFIO_DEVICE_GET_GFX_DMABUF. (Alex)
- rebase 4.14.0-rc6.
v15:
- add VFIO_DEVICE_GET_GFX_DMABUF ABI. (Gerd)
- add intel_vgpu_dmabuf_cleanup() to clean up the vGPU's dmabuf. (Gerd)
v14:
- add PROBE, DMABUF and REGION flags. (Alex)
v12:
- refine the lifecycle of dmabuf.
v9:
- remove dma-buf management. (Alex)
- track the dma-buf create and release in kernel mode. (Gerd) (Daniel)
v8:
- refine the dma-buf ioctl definition.(Alex)
- add a lock to protect the dmabuf list. (Alex)
v7:
- release dma-buf related allocations in dma-buf's associated release
function. (Alex)
- refine ioctl interface for querying plane info or create dma-buf.
(Alex)
v6:
- align the dma-buf life cycle with the vfio device. (Alex)
- add the dma-buf related operations in a separate patch. (Gerd)
- i915 related changes. (Chris)
v5:
- fix bug while checking whether the gem obj is gvt's dma-buf when user
change caching mode or domains. Add a helper function to do it.
(Xiaoguang)
- add definition for the query plane and create dma-buf. (Xiaoguang)
v4:
- fix bug while checking whether the gem obj is gvt's dma-buf when set
caching mode or doamins. (Xiaoguang)
v3:
- declare a new flag I915_GEM_OBJECT_IS_GVT_DMABUF in drm_i915_gem_object
to represent the gem obj for gvt's dma-buf. The tiling mode, caching
mode and domains can not be changed for this kind of gem object. (Alex)
- change dma-buf related information to be more generic. So other vendor
can use the same interface. (Alex)
v2:
- create a management fd for dma-buf operations. (Alex)
- alloc gem object's backing storage in gem obj's get_pages() callback.
(Chris)
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Windows guest driver needs vbt in opregion, to configure the setting
for display. Without opregion support, the display registers won't
be set and this blocks display model to get the correct information
of the guest display plane.
This patch is to provide a virtual opregion for guest. The original
author of this patch is Xiaoguang Chen.
This patch is split from the "Dma-buf support for GVT-g" patch set,
with being rebased to the latest gvt-staging branch.
v3:
- add checking region index during intel_vgpu_rw. (Xiong)
v2:
- refine intel_vgpu_reg_release_opregion. (Xiong)
Here are the previous version comments:
v18:
- unmap vgpu's opregion when destroying vgpu.
v16:
- rebase to 4.14.0-rc6.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Tested-by: Xiong Zhang <xiong.y.zhang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Currently guest opregion is allocated and initialised when guest
write opregion base register. This is too late for kvmgt, so
move it to vgpu_create time.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Tested-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
The engine provides a mirror of the CSB and CSB write pointer in the HWSP.
Read these status from virtual HWSP in VM can reduce CPU utilization while
applications have much more short GPU workloads. Here we update the
corresponding data in virtual HWSP as it in virtual MMIO.
Before read these status from HWSP in GVT-g VM, please ensure the host
support it by checking the BIT(3) of caps in PVINFO.
Virtual HWSP only support GEN8+ platform, since the HWSP MMIO may change
follow the platform update, please add the corresponding MMIO emulation
when enable new platforms in GVT-g.
v3 : Add address audit in HWSP address update.
v4 :
Separate this patch with enalbe virtual HWSP in VM.
Use intel_gvt_render_mmio_to_ring_id() to determine ring_id by offset.
v5 : Remove unnessary check about Gen8, GVT-g only support Gen8+.
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
We need debugfs entry to expose some debug information of gvt and vGPUs.
The first tool will be added is mmio-diff, which help to find the
difference values of host and vGPU mmio. It's useful for platform
enabling.
This patch just add a basic debugfs infrastructure, each vGPU has its own
sub-folder. Two simple attributes are created as a template.
.
├── num_tracked_mmio
├── vgpu1
| └── active
└── vgpu2
└── active
Signed-off-by: Changbin Du <changbin.du@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
|
|
Introduce an generic API to reset vGPU virtual submission interface.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
|
|
Introduce vGPU submission ops to support easy switching submission mode
of one vGPU between different OSes.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
|
|
Move tlb_handle_pending into intel_vgpu_submssion since it belongs to a
part of vGPU submission stuffs
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
|
|
Introduce intel_vgpu_submission to hold all members related to submission
in struct intel_vgpu before.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
|
|
To move workload related functions into scheduler.c, an expected way is
to collect all the init/clean functions related to vGPU workload
submission into fewer functions.
Rename intel_vgpu_{init, clean}_gvt_context() for above usage in future.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
|
|
git://anongit.freedesktop.org/git/drm-intel into drm-next
Final pile of features for 4.14
- New ioctl to change NOA configurations, plus prep (Lionel)
- CCS (color compression) scanout support, based on the fancy new
modifier additions (Ville&Ben)
- Document i915 register macro style (Jani)
- Many more gen10/cnl patches (Rodrigo, Pualo, ...)
- More gpu reset vs. modeset duct-tape to restore the old way.
- prep work for cnl: hpd_pin reorg (Rodrigo), support for more power
wells (Imre), i2c pin reorg (Anusha)
- drm_syncobj support (Jason Ekstrand)
- forcewake vs gpu reset fix (Chris)
- execbuf speedup for the no-relocs fastpath, anv/vk low-overhead ftw (Chris)
- switch to idr/radixtree instead of the resizing ht for execbuf id->vma
lookups (Chris)
gvt:
- MMIO save/restore optimization (Changbin)
- Split workload scan vs. dispatch for more parallel exec (Ping)
- vGPU full 48bit ppgtt support (Joonas, Tina)
- vGPU hw id expose for perf (Zhenyu)
Bunch of work all over to make the igt CI runs more complete/stable.
Watch https://intel-gfx-ci.01.org/tree/drm-tip/shards-all.html for
progress in getting this ready. Next week we're going into production
mode (i.e. will send results to intel-gfx) on hsw, more platforms to
come.
Also, a new maintainer tram, I'm stepping out. Huge thanks to Jani for
being an awesome co-maintainer the past few years, and all the best
for Jani, Joonas&Rodrigo as the new maintainers!
* tag 'drm-intel-next-2017-08-18' of git://anongit.freedesktop.org/git/drm-intel: (179 commits)
drm/i915: Update DRIVER_DATE to 20170818
drm/i915/bxt: use NULL for GPIO connection ID
drm/i915: Mark the GT as busy before idling the previous request
drm/i915: Trivial grammar fix s/opt of/opt out of/ in comment
drm/i915: Replace execbuf vma ht with an idr
drm/i915: Simplify eb_lookup_vmas()
drm/i915: Convert execbuf to use struct-of-array packing for critical fields
drm/i915: Check context status before looking up our obj/vma
drm/i915: Don't use MI_STORE_DWORD_IMM on Sandybridge/vcs
drm/i915: Stop touching forcewake following a gen6+ engine reset
MAINTAINERS: drm/i915 has a new maintainer team
drm/i915: Split pin mapping into per platform functions
drm/i915/opregion: let user specify override VBT via firmware load
drm/i915/cnl: Reuse skl_wm_get_hw_state on Cannonlake.
drm/i915/gen10: implement gen 10 watermarks calculations
drm/i915/cnl: Fix LSPCON support.
drm/i915/vbt: ignore extraneous child devices for a port
drm/i915/cnl: Setup PAT Index.
drm/i915/edp: Allow alternate fixed mode for eDP if available.
drm/i915: Add support for drm syncobjs
...
|
|
Guest i915 full ppgtt functionality was blocking by an issue, which would
lead to gpu hardware hang. Guest i915 driver may update the ppgtt table
just before this workload is going to be submitted to the hardware by
device model. This case wasn't handled well by device model before, due
to the small time window between removing old ppgtt entry and adding the
new one. Errors occur when the workload is executed by hardware during
that small time window. This patch is to remove this time window by adding
the new ppgtt entry first and then remove the old one.
Changes in v2:
- Move VGT_CAPS_FULL_PPGTT introduction to patch 2/4. (Joonas)
Changes since v2:
- Divide the whole patch set into two separate patch series, with one
patch in i915 side to check guest i915 full ppgtt capability and enable
it when this capability is supported by the device model, and the other
one in gvt side which fixs the blocking issue and enables the device
model to provide the capability to guest. And this patch focuses on gvt
side. (Joonas)
- Change the title from "reorder the shadow ppgtt update process by adding
entry first" to "Fix guest i915 full ppgtt blocking issue". (Tina)
Changes since v3:
- Rebase to the latest branch.
Changes since v4:
- Tested by Tina Zhang.
Changes since v5:
- Rebase to the latest branch.
v6:
- Update full 48bit ppgtt definition
Cc: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
When doing the VGPU reset, we don't need to do the gtt/ppgtt reset.
This will make the GVT to do the ppgtt shadow every time for
a workload and caused really bad performance after a VGPU reset.
This patch will make sure ppgtt clean only happen at device module
level reset to fix this.
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Use resetting_eng to identify which engine is resetting
so the rest ones' workload won't be impacted
v2:
- use ENGINE_MASK(ring_id) instead of (1 << ring_id). (Zhenyu)
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
during the emulation of virtual reset:
1. only reset the engine related mmio ending with MMIO
offset Master_IRQ, not include display stuff.
2. fences are not required to set default
value as well to prevent screen flicking.
this will fix the issue of Guest screen hang while running
Force tdr in Linux guest.
v2:
- only reset the engine related mmio. (Zhenyu & Zhiyuan)
v3:
- IMR/Ring mode registers are not save/restored. (Changbin)
v4:
- redefine the MMIO reset offset for easy understanding. (Zhenyu)
- pvinfo can be reset. (Zhenyu)
v5:
- add more comments for mmio reset. (Zhenyu)
Cc: Changbin Du <changbin.du@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Lv zhiyuan <zhiyuan.lv@intel.com>
Cc: Zhang Yulei <yulei.zhang@intel.com>
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Backmerge Linux 4.11-rc7 from Linus tree, to fix some
conflicts that were causing problems with the rerere cache
in drm-tip.
|
|
drm-intel-fixes
gvt-fixes-2017-04-01
- Fix cfg space in failsafe (Changbin)
- Fix a race for irq inject with vgpu release (Zhi)
- Fix golden state firmware load (Zhi)
Link: http://patchwork.freedesktop.org/patch/msgid/20170401080650.6cvqon7nsbziwnyc@zhen-hp.sh.intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
From commit d1a513be1f0a ("drm/i915/gvt: add resolution definition for vGPU
type"), small type has been restricted to small resolution, so not
require larger high GM size any more. Change to smaller 384M for more
VM creation with vGPU enabled which still perform reasonable workload.
Fixes: d1a513be1f0a ("drm/i915/gvt: add resolution definition for vGPU type")
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
(cherry picked from commit bf39ec335eb8cc51b4e1c9303ef92b380d204bb1)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
This patch introduces two functions for activating/de-activating vGPU in
mdev ops.
A racing condition was found between virtual vblank emulation and KVGMT
mdev release path. V-blank emulation will emulate and inject V-blank
interrupt for every active vGPU with holding gvt->lock, while in mdev
release path, it will directly release hypervisor handle without changing
vGPU status or taking gvt->lock, so a kernel oops is encountered when
vblank emulation is injecting a interrupt with a invalid hypervisor
handle. (Reported by Terrence)
To solve this problem, we factor out vGPU activation/de-activation from
vGPU creation/destruction path and let KVMGT mdev release ops de-activate
the vGPU before release hypervisor handle. Once a vGPU is de-activated,
GVT-g will not emulate v-blank for it or touch the hypervisor handle.
Fixes: 659643f ("drm/i915/gvt/kvmgt: add vfio/mdev support to KVMGT")
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
vGPU resource is allocated by scheduler. To account for non-allocated
free cycles, we create an idle vGPU as the placeholder similar to idle task
concept, which is useful to handle some corner cases in scheduling policy.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
The weight defines proportional control of physical GPU resource
shared between vGPUs. So far the weight is tied to a specific vGPU
type, i.e when creating multiple vGPUs with different types, they
will inherit different weights.
e.g. The weight of type GVTg_V5_2 is 8, the weight of type GVTg_V5_4
is 4, so vGPU of type GVTg_V5_2 has double vGPU resource of vGPU type
GVTg_V5_4.
TODO: allow user control the weight setting in the future.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
From commit d1a513be1f0a ("drm/i915/gvt: add resolution definition for vGPU
type"), small type has been restricted to small resolution, so not
require larger high GM size any more. Change to smaller 384M for more
VM creation with vGPU enabled which still perform reasonable workload.
Fixes: d1a513be1f0a ("drm/i915/gvt: add resolution definition for vGPU type")
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
This assigns resolution definition for each vGPU type. For smaller
resource type we should limit max resolution, so e.g limit to 1024x768
for 64M type, others are still default to 1920x1200.
v2: Fix for actual 1920x1200 resolution
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Previous vGPU type create tried to determine vGPU type name e.g _1, _2
based on the number of mdev devices can be created, but different type
might have very different resource size depending on physical device.
We need to split type name vs. actual mdev resource and create fixed
vGPU type with determined size for consistence.
With this we'd like to fix vGPU types for _1, _2, _4 and _8 now, each
type has fixed defined resource size. Available mdev instances that could
be created is determined by physical resource, and user should query
for that before creating.
Cc: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
New failsafe mode is introduced, when we detect guest not supporting
GVT-g.
In failsafe mode, we will ignore all the MMIO and cfg space read/write
from guest.
This patch can fix the issue that when guest kernel or graphics driver
version is too low, there will be a lot of kernel traces in host.
V5: rebased onto latest gvt-staging
V4: changed coding style by Zhenyu and Ping's advice
V3: modified coding style and error messages according to Zhenyu's comment
V2: 1) implemented MMIO/GTT/WP pages read/write logic; 2) used a unified
function to enter failsafe mode
Signed-off-by: Min He <min.he@intel.com>
Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
We also need reset vGPU virtual display emulation. Since all vreg has
been cleared, we need reset display related vreg to reflect our display
setting.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Cc: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
As now gvt init after knowing hw resource info, we can determine vGPU
type from machine size instead of pre-defined value.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Our function tests found several issues related to reusing vGPU
instance. They are qemu reboot failure, guest tdr after reboot, host
hang when reboot guest. All these issues are caused by dirty status
inherited from last VM.
This patch fix all these issues by resetting a virtual GPU before VM
use it. The reset logical is put into a low level function
_intel_gvt_reset_vgpu(), which supports Device Model Level Reset, Full
GT Reset and Per-Engine Reset.
vGPU Device Model Level Reset (DMLR) simulates the PCI reset to reset
the whole vGPU to default state as when it is created, including GTT,
execlist, scratch pages, cfg space, mmio space, pvinfo page, scheduler
and fence registers. The ultimate goal of vGPU DMLR is that reuse a
vGPU instance by different virtual machines. When we reassign a vGPU
to a virtual machine we must issue such reset first.
Full GT Reset and Per-Engine GT Reset are soft reset flow for GPU engines
(Render, Blitter, Video, Video Enhancement). It is defined by GPU Spec.
Unlike the FLR, GT reset only reset particular resource of a vGPU per
the reset request. Guest driver can issue a GT reset by programming
the virtual GDRST register to reset specific virtual GPU engine or all
engines.
Since vGPU DMLR and GT reset can share some code so we implement both
these two into one single function intel_gvt_reset_vgpu_locked(). The
parameter dmlr is to identify if we will do FLR or GT reset. The
parameter engine_mask is to specific the engines that need to be
resetted. If value ALL_ENGINES is given for engine_mask, it means
the caller requests a full gt reset that we will reset all virtual
GPU engines.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Reviewed-by: Jike Song <jike.song@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Move the mmio space inititation function setup_vgpu_mmio()
and cleanup function clean_vgpu_mmio() in vgpu.c to dedicated
source file mmio.c, and rename them as intel_vgpu_init_mmio()
and intel_vgpu_clean_mmio() respectively.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Move the configuration space inititation function setup_vgpu_cfg_space()
in vgpu.c to dedicated source file cfg_space.c, and rename the function
as intel_vgpu_init_cfg_space().
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Once idr_alloc gets called data is allocated within the idr list, if
any error occurs afterwards, we should undo that by idr_remove on the
error path.
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Previous high mem size initialized for vGPU type was too small which caused
failure for some VMs. This trys to take minimal value of 384MB for each VM and
enlarge default high mem size to make guest driver happy.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Initiate param.primary to 1. We should be primary currently.
Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Since there's no opregion in vgpu so clear the opregion bits in case
guest access it.
Signed-off-by: Xiaoguang Chen <xiaoguang.chen@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Gvt gdrst handler handle_device_reset() invoke function
setup_vgpu_mmio() to reset mmio status. In this case,
the virtual mmio memory has been allocated already. The
new allocation just cause old mmio memory leakage.
Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
There are currently 4 methods in intel_gvt_io_emulation_ops
to emulate CFG/MMIO reading/writing for intel vGPU. A possibly
better scope is: add 3 more methods for vgpu create/destroy/reset
respectively, and rename the ops to 'intel_gvt_ops', then pass
it to the MPT module (say the future kvmgt) to use: they are
all methods for external usage.
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Current GVT contains some obsolete logic originally cooked to
support the old, non-vfio kvmgt, which is actually workarounds.
We don't support that anymore, so it's safe to remove it and
make a better framework.
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
By providing predefined vGPU types, users can choose which type a vgpu
to create and use, without specifying detailed parameters.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Jike Song <jike.song@intel.com>
|
|
Full vGPU reset need to release all the shadow PPGGT pages to avoid
unnecessary write-protect and also should re-initialize pvinfo after
resetting vregs to keep pvinfo correct.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
i915 core should only call functions and structures exposed through
intel_gvt.h. Remove internal gvt.h and i915_pvinfo.h.
Change for internal intel_gvt structure as private handler which
not requires to expose gvt internal structure for i915 core.
v2: Fix per Chris's comment
- carefully handle dev_priv->gvt assignment
- add necessary bracket for macro helper
- forward declartion struct intel_gvt
- keep free operation within same file handling alloc
v3: fix use after free and remove intel_gvt.initialized
v4: change to_gvt() to an inline
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
As different VM may configure different render MMIOs when executing
workload, to schedule workloads between different VM, the render MMIOs
have to be switched.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
This patch introduces a vGPU schedule policy framework, with a timer based
schedule policy module for now
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
This patch introduces the vGPU workload scheduler routines.
GVT workload scheduler is responsible for picking and executing GVT workload
from current scheduled vGPU. Before the workload is submitted to host i915,
the guest execlist context will be shadowed in the host GVT shadow context.
the instructions in guest ring buffer will be copied into GVT shadow ring
buffer. Then GVT-g workload scheduler will scan the instructions in guest
ring buffer and submit it to host i915.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
This patch introduces the vGPU workload submission logics.
Under virtualization environment, guest will submit workload through
virtual execlist submit port. The submitted workload load will be wrapped
into an gvt workload which will be picked by GVT workload scheduler and
executed on host i915 later.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
This patch introduces the vGPU execlist virtualization.
Under virtulization environment, HW execlist interface are fully emulated
including virtual CSB emulation, virtual execlist emulation. The framework
will emulate the virtual CSB according to the guest workload running status
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|