summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/i915/gt/intel_engine_cs.c
AgeCommit message (Collapse)AuthorFilesLines
2019-10-09drm/i915/gt: execlists->active is serialised by the taskletChris Wilson1-9/+7
The active/pending execlists is no longer protected by the engine->active.lock, but is serialised by the tasklet instead. Update the locking around the debug and stats to follow suit. v2: local_bh_disable() to prevent recursing into the tasklet in case we trigger a softirq (Tvrtko) Fixes: df403069029d ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191009160906.16195-1-chris@chris-wilson.co.uk (cherry picked from commit c36eebd9ba5d70b84e1e7408ccc7632566f285c4) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-08-20drm/i915/tgl: Gen12 render context sizeDaniele Ceraolo Spurio1-0/+1
Re-use Gen11 context size for now. [ Lucas: this is a temporary enabling patch that needs to be confirmed: we need to check BSpec 46255 and recompute ] Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190817093902.2171-27-lucas.demarchi@intel.com
2019-08-16drm/i915/execlists: Lift process_csb() out of the irq-off spinlockChris Wilson1-1/+1
If we only call process_csb() from the tasklet, though we lose the ability to bypass ksoftirqd interrupt processing on direct submission paths, we can push it out of the irq-off spinlock. The penalty is that we then allow schedule_out to be called concurrently with schedule_in requiring us to handle the usage count (baked into the pointer itself) atomically. As we do kick the tasklets (via local_bh_enable()) after our submission, there is a possibility there to see if we can pull the local softirq processing back from the ksoftirqd. v2: Store the 'switch_priority_hint' on submission, so that we can safely check during process_csb(). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190816171608.11760-1-chris@chris-wilson.co.uk
2019-08-15drm/i915: Protect request retirement with timeline->mutexChris Wilson1-1/+0
Forgo the struct_mutex requirement for request retirement as we have been transitioning over to only using the timeline->mutex for controlling the lifetime of a request on that timeline. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190815205709.24285-4-chris@chris-wilson.co.uk
2019-08-14drm/i915: Print CCID for all renderCSStuart Summers1-1/+1
Use render class instead of RCS0 when printing CCID. Signed-off-by: Stuart Summers <stuart.summers@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190813174121.129593-2-stuart.summers@intel.com
2019-08-14drm/i915: Include engine->mmio_base in the debug dumpChris Wilson1-0/+1
Some IGT would like to know the mmio address of each engine so make it available. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Stuart Summers <stuart.summers@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190813215707.14703-1-chris@chris-wilson.co.uk
2019-08-12drm/i915/gt: Use the local engine wakeref when checking RING registersChris Wilson1-7/+3
Now that we can atomically acquire the engine wakeref, make use of it when check whether the RING registers are idle. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190812091045.29587-7-chris@chris-wilson.co.uk
2019-08-09drm/i915: Lift timeline into intel_contextChris Wilson1-1/+0
Move the timeline from being inside the intel_ring to intel_context itself. This saves much pointer dancing and makes the relations of the context to its timeline much clearer. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190809182518.20486-4-chris@chris-wilson.co.uk
2019-08-09drm/i915: Push the ring creation flags to the backendChris Wilson1-0/+2
Push the ring creation flags from the outer GEM context to the inner intel_context to avoid an unsightly back-reference from inside the backend. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190809182518.20486-3-chris@chris-wilson.co.uk
2019-08-08drm/i915: Defer final intel_wakeref_put to process contextChris Wilson1-0/+1
As we need to acquire a mutex to serialise the final intel_wakeref_put, we need to ensure that we are in process context at that time. However, we want to allow operation on the intel_wakeref from inside timer and other hardirq context, which means that need to defer that final put to a workqueue. Inside the final wakeref puts, we are safe to operate in any context, as we are simply marking up the HW and state tracking for the potential sleep. It's only the serialisation with the potential sleeping getting that requires careful wait avoidance. This allows us to retain the immediate processing as before (we only need to sleep over the same races as the current mutex_lock). v2: Add a selftest to ensure we exercise the code while lockdep watches. v3: That test was extremely loud and complained about many things! v4: Not a whale! Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111295 References: https://bugs.freedesktop.org/show_bug.cgi?id=111245 References: https://bugs.freedesktop.org/show_bug.cgi?id=111256 Fixes: 18398904ca9e ("drm/i915: Only recover active engines") Fixes: 51fbd8de87dc ("drm/i915/pmu: Atomically acquire the gt_pm wakeref") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190808202758.10453-1-chris@chris-wilson.co.uk
2019-08-08drm/i915: Allocate kernel_contexts directlyChris Wilson1-27/+31
Ignore the central i915->kernel_context for allocating an engine, as that GEM context is being phased out. For internal clients, we just need the per-engine logical state, so allocate it at the point of use. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190808110612.23539-1-chris@chris-wilson.co.uk
2019-08-07drm/i915: Rename engines to match their user interfaceChris Wilson1-31/+11
During engine setup, we may find that some engines are fused off causing a misalignment between internal names and the instances seen by users, e.g. (I915_ENGINE_CLASS_VIDEO_DECODE, 1) may be vcs2 in hardware. Normally this is invisible to the user, but a few debug interfaces (and our own internal tracing) use the original HW name not the name the user would expect as formed from their class:instance tuple. Replace our internal name with the uabi name for consistency with, for example, error states. v2: Keep the pretty printing of class name in the selftest Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111311 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190807110431.8130-1-chris@chris-wilson.co.uk
2019-08-06drm/i915/gt: Move the [class][inst] lookup for engines onto the GTChris Wilson1-94/+15
To maintain a fast lookup from a GT centric irq handler, we want the engine lookup tables on the intel_gt. To avoid having multiple copies of the same multi-dimension lookup table, move the generic user engine lookup into an rbtree (for fast and flexible indexing). v2: Split uabi_instance cf uabi_class v3: Set uabi_class/uabi_instance after collating all engines to provide a stable uabi across parallel unordered construction. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> #v2 Link: https://patchwork.freedesktop.org/patch/msgid/20190806124300.24945-2-chris@chris-wilson.co.uk
2019-08-04drm/i915: Replace struct_mutex for batch pool serialisationChris Wilson1-7/+4
Switch to tracking activity via i915_active on individual nodes, only keeping a list of retired objects in the cache, and reaping the cache when the engine itself idles. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190804124826.30272-2-chris@chris-wilson.co.uk
2019-08-02drm/i915: Add i915 to i915_inject_probe_failureMichal Wajdeczko1-1/+1
With i915 added to i915_inject_probe_failure we can use dedicated printk when injecting artificial load failure. Also make this function look like other i915 functions that return error code and make it more flexible to return any provided error code instead of previously assumed -ENODEV. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190802184055.31988-2-michal.wajdeczko@intel.com
2019-07-19drm/i915: Fix and improve MCR selection logicTvrtko Ursulin1-24/+0
A couple issues were present in this code: 1. fls() usage was incorrect causing off by one in subslice mask lookup, which in other words means subslice mask of all zeroes is always used (subslice mask of a slice which is not present, or even out of bounds array access), rendering the checks in wa_init_mcr either futile or random. 2. Condition in WARN_ON was not correct. It is doing a bitwise and operation between a positive (present subslices) and negative mask (disabled L3 banks). This means that with corrected fls() usage the assert would always incorrectly fail. We could fix this by inverting the fuse bits in the check, but instead do one better and improve the code so it not only asserts, but finds the first common index between the two masks and only warns if no such index can be found. v2: * Simplify check for logic and redability. * Improve commentary explaining what is really happening ie. what the assert is really trying to check and why. v3: * Find first common index instead of just asserting. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: fe864b76c2ab ("drm/i915: Implement WaProgramMgsrForL3BankSpecificMmioReads") Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> # v1 Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Stuart Summers <stuart.summers@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190717180624.20354-4-tvrtko.ursulin@linux.intel.com
2019-07-19drm/i915: Trust programmed MCR in read_subslice_regTvrtko Ursulin1-25/+12
Instead of re-calculating the MCR selector in read_subslice_reg do the rwm on its existing value and restore it when done. This consolidates MCR programming to one place for cnl+, and avoids re-calculating its default value on older platforms during hangcheck. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190717180624.20354-3-tvrtko.ursulin@linux.intel.com
2019-07-19drm/i915: Fix GEN8_MCR_SELECTOR programmingTvrtko Ursulin1-2/+7
fls returns bit positions starting from one for the lsb and the MCR register expects zero based (sub)slice addressing. Incorrent MCR programming can have the effect of directing MMIO reads of registers in the 0xb100-0xb3ff range to invalid subslice returning zeroes instead of actual content. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 1e40d4aea57b ("drm/i915/cnl: Implement WaProgramMgsrForCorrectSliceSpecificMmioReads") Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190717180624.20354-2-tvrtko.ursulin@linux.intel.com
2019-07-16drm/i915/execlists: Disable preemption under GVTChris Wilson1-2/+2
Preempt-to-busy uses a GPU semaphore to enforce an idle-barrier across preemption, but mediated gvt does not fully support semaphores. v2: Fiddle around with the flags and settle on using has-semaphores for the core bits so that we retain the ability to preempt our own semaphores. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Xiaolin Zhang <xiaolin.zhang@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190709091233.8573-1-chris@chris-wilson.co.uk
2019-07-16drm/i915: Lock the engine while dumping the active requestChris Wilson1-7/+4
We cannot let the request be retired and freed while we are trying to dump it during error capture. It is not sufficient just to grab a reference to the request, as during retirement we may free the ring which we are also dumping. So take the engine lock to prevent retiring and freeing of the request. Reported-by: Alex Shumsky <alexthreed@gmail.com> Fixes: 83c317832eb1 ("drm/i915: Dump the ringbuffer of the active request for debugging") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Alex Shumsky <alexthreed@gmail.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190715080946.15593-6-chris@chris-wilson.co.uk
2019-07-12drm/i915/gt: Use intel_gt as the primary object for handling resetsChris Wilson1-8/+8
Having taken the first step in encapsulating the functionality by moving the related files under gt/, the next step is to start encapsulating by passing around the relevant structs rather than the global drm_i915_private. In this step, we pass intel_gt to intel_reset.c Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190712192953.9187-1-chris@chris-wilson.co.uk
2019-07-12drm/i915: Replace "_load" with "_probe" consequentlyJanusz Krzysztofik1-1/+1
Use the "_probe" nomenclature not only in i915_driver_probe() helper name but also in other related function / variable names for consistency. Only the userspace exposed name of a related module parameter is left untouched. Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190712112429.740-4-janusz.krzysztofik@linux.intel.com
2019-07-11drm/i915/guc: Remove preemption support for current fwChris Wilson1-13/+0
Preemption via GuC submission is not being supported with its current legacy incarnation. The current FW does support a similar pre-emption flow via H2G, but it is class-based instead of being instance-based, which doesn't fit well with the i915 tracking. To fix this, the firmware is being updated to better support our needs with a new flow, so we can safely remove the old code. v2 (Daniele): resurrect & rebase, reword commit message, remove preempt_context as well Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Acked-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190710005437.3496-2-daniele.ceraolospurio@intel.com
2019-07-09drm/i915/gt: Remove presumption of RCS0Chris Wilson1-6/+0
We now track features correctly instead of probing i915->engine[RCS0] which is much more flexible and avoids any nasty surprises. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190705124325.14270-2-chris@chris-wilson.co.uk
2019-07-04drm/i915/gt: Pull engine w/a initialisation into commonChris Wilson1-0/+4
We need to setup the workarounds on all engines, with the knowledge about which platforms each workaround applies to kept together in the workaround list. As such, we can pull the w/a initialisation into the common setup and try to avoid duplicating knowledge about when to setup the workarounds. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190703135805.7310-2-chris@chris-wilson.co.uk
2019-07-04drm/i915: Show support for accurate sw PMU busyness trackingChris Wilson1-3/+4
Expose whether or not we support the PMU software tracking in our scheduler capabilities, so userspace can query at runtime. v2: Use I915_SCHEDULER_CAP_ENGINE_BUSY_STATS for a less ambiguous capability name. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190703143702.11339-1-chris@chris-wilson.co.uk
2019-07-03drm/i915: synchronize_irq() against the actual irqVille Syrjälä1-1/+1
When eliminating our use of drm_irq_install() I failed to convert all our synchronize_irq() calls to consult pdev->irq instead of dev_priv->drm.irq. As we no longer populate dev_priv->drm.irq we're no longer synchronizing against anything. v2: Add intel_syncrhonize_irq() (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Reported-by: Imre Deak <imre.deak@intel.com> Fixes: b318b82455bd ("drm/i915: Nuke drm_driver irq vfuncs") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111012 Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190702151723.29739-1-ville.syrjala@linux.intel.com
2019-06-25drm/i915: Rename intel_wakeref_[is]_activeChris Wilson1-1/+1
Our general rule is to use is/has as the verb for boolean functions, rename intel_wakeref_active to intel_wakeref_is_active so the question being asked is clear. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190625130128.11009-6-chris@chris-wilson.co.uk
2019-06-21drm/i915: Eliminate dual personality of i915_scratch_offsetTvrtko Ursulin1-1/+1
Scratch vma lives under gt but the API used to work on i915. Make this consistent by renaming the function to intel_gt_scratch_offset and make it take struct intel_gt. v2: * Move to intel_gt. (Chris) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-33-tvrtko.ursulin@linux.intel.com
2019-06-21drm/i915: Rename i915_timeline to intel_timeline and move under gtTvrtko Ursulin1-7/+7
Move all timeline code under gt and rename to intel_gt prefix. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-32-tvrtko.ursulin@linux.intel.com
2019-06-21drm/i915: Make timelines gt centricTvrtko Ursulin1-2/+2
Our timelines are stored inside intel_gt so we can convert the interface to take exactly that and not i915. At the same time re-order the params to our more typical layout and replace the backpointer to the new containing structure. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-31-tvrtko.ursulin@linux.intel.com
2019-06-21drm/i915: Save trip via top-level i915 in a few more placesTvrtko Ursulin1-1/+1
For gt related operations it makes more logical sense to stay in the realm of gt instead of dereferencing via driver i915. This patch handles a few of the easy ones with work requiring more refactoring still outstanding. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-30-tvrtko.ursulin@linux.intel.com
2019-06-21drm/i915: Store backpointer to intel_gt in the engineTvrtko Ursulin1-0/+1
It will come useful in the next patch. v2: * Do mock_engine as well. v3: * And the virtual engine... Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-11-tvrtko.ursulin@linux.intel.com
2019-06-21drm/i915: Make i915_check_and_clear_faults take intel_gtTvrtko Ursulin1-1/+3
Continuing the conversion and elimination of implicit dev_priv. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-6-tvrtko.ursulin@linux.intel.com
2019-06-20drm/i915/execlists: Preempt-to-busyChris Wilson1-24/+39
When using a global seqno, we required a precise stop-the-workd event to handle preemption and unwind the global seqno counter. To accomplish this, we would preempt to a special out-of-band context and wait for the machine to report that it was idle. Given an idle machine, we could very precisely see which requests had completed and which we needed to feed back into the run queue. However, now that we have scrapped the global seqno, we no longer need to precisely unwind the global counter and only track requests by their per-context seqno. This allows us to loosely unwind inflight requests while scheduling a preemption, with the enormous caveat that the requests we put back on the run queue are still _inflight_ (until the preemption request is complete). This makes request tracking much more messy, as at any point then we can see a completed request that we believe is not currently scheduled for execution. We also have to be careful not to rewind RING_TAIL past RING_HEAD on preempting to the running context, and for this we use a semaphore to prevent completion of the request before continuing. To accomplish this feat, we change how we track requests scheduled to the HW. Instead of appending our requests onto a single list as we submit, we track each submission to ELSP as its own block. Then upon receiving the CS preemption event, we promote the pending block to the inflight block (discarding what was previously being tracked). As normal CS completion events arrive, we then remove stale entries from the inflight tracker. v2: Be a tinge paranoid and ensure we flush the write into the HWS page for the GPU semaphore to pick in a timely fashion. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190620142052.19311-1-chris@chris-wilson.co.uk
2019-06-18drm/i915: Don't dereference request if it may have been retired when printingChris Wilson1-7/+9
This has caught me out on countless occasions, when we retrieve a pointer from the submission/execlists backend, it does not carry a reference to the context or ring. Those are only pinned while the request is active, so if we see the request is already completed, it may be in the process of being retired and those pointers defunct. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110938 Fixes: 3a068721a973 ("drm/i915: Show ring->start for the ELSP context/request queue") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190618161951.28820-2-chris@chris-wilson.co.uk
2019-06-14drm/i915: Replace engine->timeline with a plain listChris Wilson1-31/+31
To continue the onslaught of removing the assumption of a global execution ordering, another casualty is the engine->timeline. Without an actual timeline to track, it is overkill and we can replace it with a much less grand plain list. We still need a list of requests inflight, for the simple purpose of finding inflight requests (for retiring, resetting, preemption etc). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190614164606.15633-3-chris@chris-wilson.co.uk
2019-06-14drm/i915: Keep contexts pinned until after the next kernel context switchChris Wilson1-20/+3
We need to keep the context image pinned in memory until after the GPU has finished writing into it. Since it continues to write as we signal the final breadcrumb, we need to keep it pinned until the request after it is complete. Currently we know the order in which requests execute on each engine, and so to remove that presumption we need to identify a request/context-switch we know must occur after our completion. Any request queued after the signal must imply a context switch, for simplicity we use a fresh request from the kernel context. The sequence of operations for keeping the context pinned until saved is: - On context activation, we preallocate a node for each physical engine the context may operate on. This is to avoid allocations during unpinning, which may be from inside FS_RECLAIM context (aka the shrinker) - On context deactivation on retirement of the last active request (which is before we know the context has been saved), we add the preallocated node onto a barrier list on each engine - On engine idling, we emit a switch to kernel context. When this switch completes, we know that all previous contexts must have been saved, and so on retiring this request we can finally unpin all the contexts that were marked as deactivated prior to the switch. We can enhance this in future by flushing all the idle contexts on a regular heartbeat pulse of a switch to kernel context, which will also be used to check for hung engines. v2: intel_context_active_acquire/_release Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190614164606.15633-1-chris@chris-wilson.co.uk
2019-06-14drm/i915: update rpm_get/put to use the rpm structureDaniele Ceraolo Spurio1-4/+4
The functions where internally already only using the structure, so we need to just flip the interface. v2: rebase Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-7-daniele.ceraolospurio@intel.com
2019-06-10drm/i915: Make read_subslice_reg take engineTvrtko Ursulin1-11/+12
The function operates on the render engine so make the input reflect it. v2: * Pass engine to read_subslice_reg. (Chris) * Drop inline from read_subslice_reg. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190610125706.26110-1-tvrtko.ursulin@linux.intel.com
2019-05-29Revert "drm/i915: Expand subslice mask"Jani Nikula1-22/+2
This reverts commit 1ac159e23c2c ("drm/i915: Expand subslice mask"), which kills ICL due to GEM_BUG_ON() sanity checks before CI even gets a chance to do anything. The commit exposes an issue in commit 1e40d4aea57b ("drm/i915/cnl: Implement WaProgramMgsrForCorrectSliceSpecificMmioReads"), which will also need to be addressed. There's a proposed fix [1], but considering the seeming uncertainty with the fix as well as the size of the regressing commit (in this context, the one that actually brings down ICL), this warrants a revert to get ICL working, and gives us time to get all of this right without rushing. Even if this means shooting the messenger. <3>[ 9.426327] intel_sseu_get_subslices:46 GEM_BUG_ON(slice >= sseu->max_slices) <4>[ 9.426355] ------------[ cut here ]------------ <2>[ 9.426357] kernel BUG at drivers/gpu/drm/i915/gt/intel_sseu.c:46! <4>[ 9.426371] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI <4>[ 9.426377] CPU: 1 PID: 364 Comm: systemd-udevd Not tainted 5.2.0-rc2-CI-CI_DRM_6159+ #1 <4>[ 9.426385] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3183.A00.1905020411 05/02/2019 <4>[ 9.426444] RIP: 0010:intel_sseu_get_subslices+0x8a/0xe0 [i915] <4>[ 9.426452] Code: d5 76 b7 e0 48 8b 35 9d 24 21 00 49 c7 c0 07 f0 72 a0 b9 2e 00 00 00 48 c7 c2 00 8e 6d a0 48 c7 c7 a5 14 5b a0 e8 36 3c be e0 <0f> 0b 48 c7 c1 80 d5 6f a0 ba 30 00 00 00 48 c7 c6 00 8e 6d a0 48 <4>[ 9.426468] RSP: 0018:ffffc9000037b9c8 EFLAGS: 00010282 <4>[ 9.426475] RAX: 000000000000000f RBX: 0000000000000000 RCX: 0000000000000000 <4>[ 9.426482] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88849e346f98 <4>[ 9.426490] RBP: ffff88848a200000 R08: 0000000000000004 R09: ffff88849d50b000 <4>[ 9.426497] R10: 0000000000000000 R11: ffff88849e346f98 R12: ffff88848a209e78 <4>[ 9.426505] R13: 0000000003000000 R14: ffff88848a20b1a8 R15: 0000000000000000 <4>[ 9.426513] FS: 00007f73d5ae8680(0000) GS:ffff88849fc80000(0000) knlGS:0000000000000000 <4>[ 9.426521] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 9.426527] CR2: 0000561417b01260 CR3: 0000000494764003 CR4: 0000000000760ee0 <4>[ 9.426535] PKRU: 55555554 <4>[ 9.426538] Call Trace: <4>[ 9.426585] wa_init_mcr+0xd5/0x110 [i915] <4>[ 9.426597] ? lock_acquire+0xa6/0x1c0 <4>[ 9.426645] icl_gt_workarounds_init+0x21/0x1a0 [i915] <4>[ 9.426694] ? i915_driver_load+0xfcf/0x18a0 [i915] <4>[ 9.426739] gt_init_workarounds+0x14c/0x230 [i915] <4>[ 9.426748] ? _raw_spin_unlock_irq+0x24/0x50 <4>[ 9.426789] intel_gt_init_workarounds+0x1b/0x30 [i915] <4>[ 9.426835] i915_driver_load+0xfd7/0x18a0 [i915] <4>[ 9.426843] ? lock_acquire+0xa6/0x1c0 <4>[ 9.426850] ? __pm_runtime_resume+0x4f/0x80 <4>[ 9.426857] ? _raw_spin_unlock_irqrestore+0x4c/0x60 <4>[ 9.426863] ? _raw_spin_unlock_irqrestore+0x4c/0x60 <4>[ 9.426870] ? lockdep_hardirqs_on+0xe3/0x1b0 <4>[ 9.426915] i915_pci_probe+0x29/0xa0 [i915] <4>[ 9.426923] pci_device_probe+0x9e/0x120 <4>[ 9.426930] really_probe+0xea/0x3c0 <4>[ 9.426936] driver_probe_device+0x10b/0x120 <4>[ 9.426942] device_driver_attach+0x4a/0x50 <4>[ 9.426948] __driver_attach+0x97/0x130 <4>[ 9.426954] ? device_driver_attach+0x50/0x50 <4>[ 9.426960] bus_for_each_dev+0x74/0xc0 <4>[ 9.426966] bus_add_driver+0x13f/0x210 <4>[ 9.426971] ? 0xffffffffa083b000 <4>[ 9.426976] driver_register+0x56/0xe0 <4>[ 9.426982] ? 0xffffffffa083b000 <4>[ 9.426987] do_one_initcall+0x58/0x300 <4>[ 9.426994] ? do_init_module+0x1d/0x1f6 <4>[ 9.427001] ? rcu_read_lock_sched_held+0x6f/0x80 <4>[ 9.427007] ? kmem_cache_alloc_trace+0x261/0x290 <4>[ 9.427014] do_init_module+0x56/0x1f6 <4>[ 9.427020] load_module+0x24d1/0x2990 <4>[ 9.427032] ? __se_sys_finit_module+0xd3/0xf0 <4>[ 9.427037] __se_sys_finit_module+0xd3/0xf0 <4>[ 9.427047] do_syscall_64+0x55/0x1c0 <4>[ 9.427053] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4>[ 9.427059] RIP: 0033:0x7f73d5609839 <4>[ 9.427064] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48 <4>[ 9.427082] RSP: 002b:00007ffdf34477b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 <4>[ 9.427091] RAX: ffffffffffffffda RBX: 00005559fd5d7b40 RCX: 00007f73d5609839 <4>[ 9.427099] RDX: 0000000000000000 RSI: 00007f73d52e8145 RDI: 000000000000000f <4>[ 9.427106] RBP: 00007f73d52e8145 R08: 0000000000000000 R09: 00007ffdf34478d0 <4>[ 9.427114] R10: 000000000000000f R11: 0000000000000246 R12: 0000000000000000 <4>[ 9.427121] R13: 00005559fd5c90f0 R14: 0000000000020000 R15: 00005559fd5d7b40 <4>[ 9.427131] Modules linked in: i915(+) mei_hdcp x86_pkg_temp_thermal coretemp snd_hda_intel crct10dif_pclmul crc32_pclmul snd_hda_codec snd_hwdep e1000e snd_hda_core ghash_clmulni_intel ptp snd_pcm cdc_ether usbnet mii pps_core mei_me mei prime_numbers btusb btrtl btbcm btintel bluetooth ecdh_generic ecc <4>[ 9.427254] ---[ end trace af3eeb543bd66e66 ]--- [1] http://patchwork.freedesktop.org/patch/msgid/20190528200655.11605-1-chris@chris-wilson.co.uk References: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6159/fi-icl-u2/pstore0-1517155098_Oops_1.log References: 1e40d4aea57b ("drm/i915/cnl: Implement WaProgramMgsrForCorrectSliceSpecificMmioReads") Fixes: 1ac159e23c2c ("drm/i915: Expand subslice mask") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Stuart Summers <stuart.summers@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Yunwei Zhang <yunwei.zhang@intel.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190529082150.31526-1-jani.nikula@intel.com
2019-05-28drm/i915: Expand subslice maskStuart Summers1-2/+22
Currently, the subslice_mask runtime parameter is stored as an array of subslices per slice. Expand the subslice mask array to better match what is presented to userspace through the I915_QUERY_TOPOLOGY_INFO ioctl. The index into this array is then calculated: slice * subslice stride + subslice index / 8 v2: fix spacing in set_sseu_info args use set_sseu_info to initialize sseu data when building device status in debugfs rename variables in intel_engine_types.h to avoid checkpatch warnings v3: update headers in intel_sseu.h v4: add const to some sseu_dev_info variables use sseu->eu_stride for EU stride calculations v5: address review comments from Tvrtko and Daniele v6: remove extra space in intel_sseu_get_subslices return the correct subslice enable in for_each_instdone add GEM_BUG_ON to ensure user doesn't pass invalid ss_mask size use printk formatted string for subslice mask v7: remove string.h header and rebase Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Stuart Summers <stuart.summers@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190524154022.13575-6-stuart.summers@intel.com
2019-05-28drm/i915: Drop the deferred active referenceChris Wilson1-1/+1
An old optimisation to reduce the number of atomics per batch sadly relies on struct_mutex for coordination. In order to remove struct_mutex from serialising object/context closing, always taking and releasing an active reference on first use / last use greatly simplifies the locking. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528092956.14910-15-chris@chris-wilson.co.uk
2019-05-28drm/i915: Move more GEM objects under gem/Chris Wilson1-0/+3
Continuing the theme of separating out the GEM clutter. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528092956.14910-8-chris@chris-wilson.co.uk
2019-05-28drm/i915/guc: Updates for GuC 32.0.3 firmwareMichal Wajdeczko1-5/+4
New GuC 32.0.3 firmware made many changes around its ABI that require driver updates: * FW release version numbering schema now includes patch number * FW release version encoding in CSS header * Boot parameters * Suspend/resume protocol * Sample-forcewake command * Additional Data Structures (ADS) This commit is a squash of patches 3-8 from series [1]. [1] https://patchwork.freedesktop.org/series/58760/ Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Jeff Mcgee <jeff.mcgee@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # numbering schema Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ccs heaser Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # boot params Acked-by: John Spotswood <john.a.spotswood@intel.com> # suspend/resume Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # sample-forcewake Acked-by: John Spotswood <john.a.spotswood@intel.com> # sample-forcewake Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ADS Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-4-michal.wajdeczko@intel.com
2019-05-22drm/i915: Engine discovery queryTvrtko Ursulin1-0/+41
Engine discovery query allows userspace to enumerate engines, probe their configuration features, all without needing to maintain the internal PCI ID based database. A new query for the generic i915 query ioctl is added named DRM_I915_QUERY_ENGINE_INFO, together with accompanying structure drm_i915_query_engine_info. The address of latter should be passed to the kernel in the query.data_ptr field, and should be large enough for the kernel to fill out all known engines as struct drm_i915_engine_info elements trailing the query. As with other queries, setting the item query length to zero allows userspace to query minimum required buffer size. Enumerated engines have common type mask which can be used to query all hardware engines, versus engines userspace can submit to using the execbuf uAPI. Engines also have capabilities which are per engine class namespace of bits describing features not present on all engine instances. v2: * Fixed HEVC assignment. * Reorder some fields, rename type to flags, increase width. (Lionel) * No need to allocate temporary storage if we do it engine by engine. (Lionel) v3: * Describe engine flags and mark mbz fields. (Lionel) * HEVC only applies to VCS. v4: * Squash SFC flag into main patch. * Tidy some comments. v5: * Add uabi_ prefix to engine capabilities. (Chris Wilson) * Report exact size of engine info array. (Chris Wilson) * Drop the engine flags. (Joonas Lahtinen) * Added some more reserved fields. * Move flags after class/instance. v6: * Do not check engine info array was zeroed by userspace but zero the unused fields for them instead. v7: * Simplify length calculation loop. (Lionel Landwerlin) v8: * Remove MBZ comments where not applicable. * Rename ABI flags to match engine class define naming. * Rename SFC ABI flag to reflect it applies to VCS and VECS. * SFC is wired to even _logical_ engine instances. * SFC applies to VCS and VECS. * HEVC is present on all instances on Gen11. (Tony) * Simplify length calculation even more. (Chris Wilson) * Move info_ptr assigment closer to loop for clarity. (Chris Wilson) * Use vdbox_sfc_access from runtime info. * Rebase for RUNTIME_INFO. * Refactor for lower indentation. * Rename uAPI class/instance to engine_class/instance to avoid C++ keyword. v9: * Rebase for s/num_rings/num_engines/ in RUNTIME_INFO. v10: * Use new copy_query_item. v11: * Consolidate with struct i915_engine_class_instnace. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tony Ye <tony.ye@intel.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> # v7 Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190522090054.6007-1-tvrtko.ursulin@linux.intel.com
2019-05-08drm/i915/hangcheck: Replace hangcheck.seqno with RING_HEADChris Wilson1-3/+2
After realising we need to sample RING_START to detect context switches from preemption events that do not allow for the seqno to advance, we can also realise that the seqno itself is just a distance along the ring and so can be replaced by sampling RING_HEAD. v2: Bonus comment for the mystery separate CS_STALL before MI_USER_INTERRUPT Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190508080704.24223-1-chris@chris-wilson.co.uk
2019-05-07drm/i915: Assert the local engine->wakeref is activeChris Wilson1-0/+3
Due to the asynchronous tasklet and recursive GT wakeref, it may happen that we submit to the engine (underneath it's own wakeref) prior to the central wakeref being marked as taken. Switch to checking the local wakeref for greater consistency. Fixes: 79ffac8599c4 ("drm/i915: Invert the GEM wakeref hierarchy") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190503115225.30831-3-chris@chris-wilson.co.uk
2019-05-03drm/i915/execlists: Flush the tasklet on parkingChris Wilson1-0/+2
Tidy up the cleanup sequence by always ensure that the tasklet is flushed on parking (before we cleanup). The parking provides a convenient point to ensure that the backend is truly idle. v2: Do the full check for idleness before parking, to be sure we flush any residual interrupt. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190503080942.30151-1-chris@chris-wilson.co.uk
2019-05-02drm/i915: Include fence signaled bit in print_request()Chris Wilson1-1/+4
Show the fence flags view of request completion in addition to the normal hwsp check and whether signaling is enabled. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190501114541.10077-2-chris@chris-wilson.co.uk
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-16 06:52:00 +0000