| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
With the introduction of the delayed disable-sched behavior,
we use the GuC's xarray of valid guc-id's as a way to
identify if new requests had been added to a context
when the said context is being checked for closure.
Additionally that prior change also closes the race for when
a new incoming request fails to cancel the pending
delayed disable-sched worker.
With these two complementary checks, we see no more
use for intel_context:guc_state:number_committed_requests.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006225121.826257-3-alan.previn.teres.alexis@intel.com
|
|
Add a delay, configurable via debugfs (default 34ms), to disable
scheduling of a context after the pin count goes to zero. Disable
scheduling is a costly operation as it requires synchronizing with
the GuC. So the idea is that a delay allows the user to resubmit
something before doing this operation. This delay is only done if
the context isn't closed and less than a given threshold
(default is 3/4) of the guc_ids are in use.
Alan Previn: Matt Brost first introduced this patch back in Oct 2021.
However no real world workload with measured performance impact was
available to prove the intended results. Today, this series is being
republished in response to a real world workload that benefited greatly
from it along with measured performance improvement.
Workload description: 36 containers were created on a DG2 device where
each container was performing a combination of 720p 3d game rendering
and 30fps video encoding. The workload density was configured in a way
that guaranteed each container to ALWAYS be able to render and
encode no less than 30fps with a predefined maximum render + encode
latency time. That means the totality of all 36 containers and their
workloads were not saturating the engines to their max (in order to
maintain just enough headrooom to meet the min fps and max latencies
of incoming container submissions).
Problem statement: It was observed that the CPU core processing the i915
soft IRQ work was experiencing severe load. Using tracelogs and an
instrumentation patch to count specific i915 IRQ events, it was confirmed
that the majority of the CPU cycles were caused by the
gen11_other_irq_handler() -> guc_irq_handler() code path. The vast
majority of the cycles was determined to be processing a specific G2H
IRQ: i.e. INTEL_GUC_ACTION_SCHED_CONTEXT_MODE_DONE. These IRQs are sent
by GuC in response to i915 KMD sending H2G requests:
INTEL_GUC_ACTION_SCHED_CONTEXT_MODE_SET. Those H2G requests are sent
whenever a context goes idle so that we can unpin the context from GuC.
The high CPU utilization % symptom was limiting density scaling.
Root Cause Analysis: Because the incoming execution buffers were spread
across 36 different containers (each with multiple contexts) but the
system in totality was NOT saturated to the max, it was assumed that each
context was constantly idling between submissions. This was causing
a thrashing of unpinning contexts from GuC at one moment, followed quickly
by repinning them due to incoming workload the very next moment. These
event-pairs were being triggered across multiple contexts per container,
across all containers at the rate of > 30 times per sec per context.
Metrics: When running this workload without this patch, we measured an
average of ~69K INTEL_GUC_ACTION_SCHED_CONTEXT_MODE_DONE events every 10
seconds or ~10 million times over ~25+ mins. With this patch, the count
reduced to ~480 every 10 seconds or about ~28K over ~10 mins. The
improvement observed is ~99% for the average counts per 10 seconds.
Design awareness: Selftest impact.
As temporary WA disable this feature for the selftests. Selftests are
very timing sensitive and any change in timing can cause failure. A
follow up patch will fixup the selftests to understand this delay.
Design awareness: Race between guc_request_alloc and guc_context_close.
If a context close is issued while there is a request submission in
flight and a delayed schedule disable is pending, guc_context_close
and guc_request_alloc will race to cancel the delayed disable.
To close the race, make sure that guc_request_alloc waits for
guc_context_close to finish running before checking any state.
Design awareness: GT Reset event.
If a gt reset is triggered, as preparation steps, add an additional step
to ensure all contexts that have a pending delay-disable-schedule task
be flushed of it. Move them directly into the closed state after cancelling
the worker. This is okay because the existing flow flushes all
yet-to-arrive G2H's dropping them anyway.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006225121.826257-2-alan.previn.teres.alexis@intel.com
|
|
to zero"
This reverts commit 6a079903847cce1dd06345127d2a32f26d2cd9c6.
Everything in CI using GuC is now timing out[1], and killing the machine
with this change (perhaps a deadlock?). CI was recently on fire due to
some changes coming in from -rc1, so likely the pre-merge CI results for
this series were invalid? For now just revert, unless GuC experts
already have a fix in mind.
[1] https://intel-gfx-ci.01.org/tree/drm-tip/index.html?
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220819123904.913750-1-matthew.auld@intel.com
|
|
Add a delay, configurable via debugfs (default 34ms), to disable
scheduling of a context after the pin count goes to zero. Disable
scheduling is a costly operation as it requires synchronizing with
the GuC. So the idea is that a delay allows the user to resubmit
something before doing this operation. This delay is only done if
the context isn't closed and less than a given threshold
(default is 3/4) of the guc_ids are in use.
As temporary WA disable this feature for the selftests. Selftests are
very timing sensitive and any change in timing can cause failure. A
follow up patch will fixup the selftests to understand this delay.
Alan Previn: Matt Brost first introduced this series back in Oct 2021.
However no real world workload with measured performance impact was
available to prove the intended results. Today, this series is being
republished in response to a real world workload that benefited greatly
from it along with measured performance improvement.
Workload description: 36 containers were created on a DG2 device where
each container was performing a combination of 720p 3d game rendering
and 30fps video encoding. The workload density was configured in a way
that guaranteed each container to ALWAYS be able to render and
encode no less than 30fps with a predefined maximum render + encode
latency time. That means the totality of all 36 containers and their
workloads were not saturating the engines to their max (in order to
maintain just enough headrooom to meet the min fps and max latencies
of incoming container submissions).
Problem statement: It was observed that the CPU core processing the i915
soft IRQ work was experiencing severe load. Using tracelogs and an
instrumentation patch to count specific i915 IRQ events, it was confirmed
that the majority of the CPU cycles were caused by the
gen11_other_irq_handler() -> guc_irq_handler() code path. The vast
majority of the cycles was determined to be processing a specific G2H
IRQ: i.e. INTEL_GUC_ACTION_SCHED_CONTEXT_MODE_DONE. These IRQs are sent
by GuC in response to i915 KMD sending H2G requests:
INTEL_GUC_ACTION_SCHED_CONTEXT_MODE_SET. Those H2G requests are sent
whenever a context goes idle so that we can unpin the context from GuC.
The high CPU utilization % symptom was limiting density scaling.
Root Cause Analysis: Because the incoming execution buffers were spread
across 36 different containers (each with multiple contexts) but the
system in totality was NOT saturated to the max, it was assumed that each
context was constantly idling between submissions. This was causing
a thrashing of unpinning contexts from GuC at one moment, followed quickly
by repinning them due to incoming workload the very next moment. These
event-pairs were being triggered across multiple contexts per container,
across all containers at the rate of > 30 times per sec per context.
Metrics: When running this workload without this patch, we measured an
average of ~69K INTEL_GUC_ACTION_SCHED_CONTEXT_MODE_DONE events every 10
seconds or ~10 million times over ~25+ mins. With this patch, the count
reduced to ~480 every 10 seconds or about ~28K over ~10 mins. The
improvement observed is ~99% for the average counts per 10 seconds.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817020511.2180747-3-alan.previn.teres.alexis@intel.com
|
|
This patch re-introduces support for GuC v69 in parallel to v70. As this
is a quick fix, v69 has been re-introduced as the single "fallback" guc
version in case v70 is not available on disk and only for platforms that
are out of force_probe and require the GuC by default. All v69 specific
code has been labeled as such for easy identification, and the same was
done for all v70 functions for which there is a separate v69 version,
to avoid accidentally calling the wrong version via the unlabeled name.
When the fallback mode kicks in, a drm_notice message is printed in
dmesg to inform the user of the required update. The existing
logging of the fetch function has also been updated so that we no
longer complain immediately if we can't find a fw and we only throw an
error if the fetch of both the base and fallback blobs fails.
The plan is to follow this up with a more complex rework to allow for
multiple different GuC versions to be supported at the same time.
v2: reduce the fallback to platform that require it, switch to
firmware_request_nowarn(), improve logs.
Fixes: 2584b3549f4c ("drm/i915/guc: Update to GuC version 70.1.1")
Link: https://lists.freedesktop.org/archives/intel-gfx/2022-July/301640.html
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220718230732.1409641-1-daniele.ceraolospurio@intel.com
|
|
We have long standing customer complaints that pressing Ctrl-C (or to the
effect of) causes engine resets with otherwise well behaving programs.
Not only is logging engine resets during normal operation not desirable
since it creates support incidents, but more fundamentally we should avoid
going the engine reset path when we can since any engine reset introduces
a chance of harming an innocent context.
Reason for this undesirable behaviour is that the driver currently does
not distinguish between banned contexts and non-persistent contexts which
have been closed.
To fix this we add the distinction between the two reasons for revoking
contexts, which then allows the strict timeout only be applied to banned,
while innocent contexts (well behaving) can preempt cleanly and exit
without triggering the engine reset path.
Note that the added context exiting category applies both to closed non-
persistent context, and any exiting context when hangcheck has been
disabled by the user.
At the same time we rename the backend operation from 'ban' to 'revoke'
which more accurately describes the actual semantics. (There is no ban at
the backend level since banning is a concept driven by the scheduling
frontend. Backends are simply able to revoke a running context so that
is the more appropriate name chosen.)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220527072452.2225610-1-tvrtko.ursulin@linux.intel.com
|
|
Track context active (on hardware) status together with the start
timestamp.
This will be used to provide better granularity of context
runtime reporting in conjunction with already tracked pphwsp accumulated
runtime.
The latter is only updated on context save so does not give us visibility
to any currently executing work.
As part of the patch the existing runtime tracking data is moved under the
new ce->stats member and updated under the seqlock. This provides the
ability to atomically read out accumulated plus active runtime.
v2:
* Rename and make __intel_context_get_active_time unlocked.
v3:
* Use GRAPHICS_VER.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com> # v1
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220401142205.3123159-6-tvrtko.ursulin@linux.intel.com
|
|
__timeline_mark_lock().
This is a revert of commits
d67739268cf0e ("drm/i915/gt: Mark up the nested engine-pm timeline lock as irqsafe")
6c69a45445af9 ("drm/i915/gt: Mark context->active_count as protected by timeline->mutex")
6dcb85a0ad990 ("drm/i915: Hold irq-off for the entire fake lock period")
The existing code leads to a different behaviour depending on whether
lockdep is enabled or not. Any following lock that is acquired without
disabling interrupts (but needs to) will not be noticed by lockdep.
This it not just a lockdep annotation but is used but an actual mutex_t
that is properly used as a lock but in case of __timeline_mark_lock()
lockdep is only told that it is acquired but no lock has been acquired.
It appears that its purpose is just satisfy the lockdep_assert_held()
check in intel_context_mark_active(). The other problem with disabling
interrupts is that on PREEMPT_RT interrupts are also disabled which
leads to problems for instance later during memory allocation.
Add a CONTEXT_IS_PARKING bit to intel_engine_cs and set_bit/clear_bit it
instead of mutex_acquire/mutex_release. Use test_bit in the two
identified spots which relied on the lockdep annotation.
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YbO8Ie1Nj7XcQPNQ@linutronix.de
|
|
Allow multiple batch buffers to be submitted in a single execbuf IOCTL
after a context has been configured with the 'set_parallel' extension.
The number batches is implicit based on the contexts configuration.
This is implemented with a series of loops. First a loop is used to find
all the batches, a loop to pin all the HW contexts, a loop to create all
the requests, a loop to submit (emit BB start, etc...) all the requests,
a loop to tie the requests to the VMAs they touch, and finally a loop to
commit the requests to the backend.
A composite fence is also created for the generated requests to return
to the user and to stick in dma resv slots.
No behavior from the existing IOCTL should be changed aside from when
throttling because the ring for a context is full. In this situation,
i915 will now wait while holding the object locks. This change was done
because the code is much simpler to wait while holding the locks and we
believe there isn't a huge benefit of dropping these locks. If this
proves false we can restructure the code to drop the locks during the
wait.
IGT: https://patchwork.freedesktop.org/patch/447008/?series=93071&rev=1
media UMD: https://github.com/intel/media-driver/pull/1252
v2:
(Matthew Brost)
- Return proper error value if i915_request_create fails
v3:
(John Harrison)
- Add comment explaining create / add order loops + locking
- Update commit message explaining different in IOCTL behavior
- Line wrap some comments
- eb_add_request returns void
- Return -EINVAL rather triggering BUG_ON if cmd parser used
(Checkpatch)
- Check eb->batch_len[*current_batch]
v4:
(CI)
- Set batch len if passed if via execbuf args
- Call __i915_request_skip after __i915_request_commit
(Kernel test robot)
- Initialize rq to NULL in eb_pin_timeline
v5:
(John Harrison)
- Fix typo in comments near bb order loops
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-21-matthew.brost@intel.com
|
|
For some users of multi-lrc, e.g. split frame, it isn't safe to preempt
mid BB. To safely enable preemption at the BB boundary, a handshake
between parent and child is needed, syncing the set of BBs at the
beginning and end of each batch. This is implemented via custom
emit_bb_start & emit_fini_breadcrumb functions and enabled by default if
a context is configured by set parallel extension.
Lastly, this patch updates the process descriptor to the correct size as
the memory used in the handshake is directly after the process
descriptor.
v2:
(John Harrison)
- Fix a few comments wording
- Add struture for parent page layout
v3:
(John Harrison)
- A structure for sync semaphore
- Use offsetof to calc address
- Update commit message
v4:
(John Harrison)
- Fix typos in comment explaining memory map of scratch page
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-20-matthew.brost@intel.com
|
|
Introduce 'set parallel submit' extension to connect UAPI to GuC
multi-lrc interface. Kernel doc in new uAPI should explain it all.
IGT: https://patchwork.freedesktop.org/patch/447008/?series=93071&rev=1
media UMD: https://github.com/intel/media-driver/pull/1252
v2:
(Daniel Vetter)
- Add IGT link and placeholder for media UMD link
v3:
(Kernel test robot)
- Fix warning in unpin engines call
(John Harrison)
- Reword a bunch of the kernel doc
v4:
(John Harrison)
- Add comment why perma-pin is done after setting gem context
- Update some comments / docs for proto contexts
v5:
(John Harrison)
- Rework perma-pin comment
- Add BUG_IN if context is pinned when setting gem context
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-17-matthew.brost@intel.com
|
|
The GuC must receive requests in the order submitted for contexts in a
parent-child relationship to function correctly. To ensure this, insert
a submit fence between the current request and last request submitted
for requests / contexts in a parent child relationship. This is
conceptually similar to a single timeline.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-14-matthew.brost@intel.com
|
|
Add multi-lrc context registration H2G. In addition a workqueue and
process descriptor are setup during multi-lrc context registration as
these data structures are needed for multi-lrc submission.
v2:
(John Harrison)
- Move GuC specific fields into sub-struct
- Clean up WQ defines
- Add comment explaining math to derive WQ / PD address
v3:
(John Harrison)
- Add PARENT_SCRATCH_SIZE define
- Update comment explaining multi-lrc register
v4:
(John Harrison)
- Move PARENT_SCRATCH_SIZE to common file
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-9-matthew.brost@intel.com
|
|
Introduce context parent-child relationship. Once this relationship is
created all pinning / unpinning operations are directed to the parent
context. The parent context is responsible for pinning all of its
children and itself.
This is a precursor to the full GuC multi-lrc implementation but aligns
to how GuC mutli-lrc interface is defined - a single H2G is used
register / deregister all of the contexts simultaneously.
Subsequent patches in the series will implement the pinning / unpinning
operations for parent / child contexts.
v2:
(Daniel Vetter)
- Add kernel doc, add wrapper to access parent to ensure safety
v3:
(John Harrison)
- Fix comment explaing GEM_BUG_ON in to_parent()
- Make variable names generic (non-GuC specific)
v4:
(John Harrison)
- s/its'/its/g
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-8-matthew.brost@intel.com
|
|
Taking a PM reference to prevent intel_gt_wait_for_idle from short
circuiting while a deregister context H2G is in flight. To do this must
issue the deregister H2G from a worker as context can be destroyed from
an atomic context and taking GT PM ref blows up. Previously we took a
runtime PM from this atomic context which worked but will stop working
once runtime pm autosuspend in enabled.
So this patch is two fold, stop intel_gt_wait_for_idle from short
circuting and fix runtime pm autosuspend.
v2:
(John Harrison)
- Split structure changes out in different patch
(Tvrtko)
- Don't drop lock in deregister_destroyed_contexts
v3:
(John Harrison)
- Flush destroyed contexts before destroying context reg pool
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-3-matthew.brost@intel.com
|
|
Move guc_id allocation under submission state sub-struct as a future
patch will reuse the spin lock as a global submission state lock. Moving
this into sub-struct makes ownership of fields / lock clear.
v2:
(Docs)
- Add comment for submission_state sub-structure
v3:
(John Harrison)
- Fixup a few comments
v4:
(John Harrison)
- Fix typo
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-2-matthew.brost@intel.com
|
|
Pinned contexts, like the migrate contexts need reset after resume
since their context image may have been lost. Also the GuC needs to
register pinned contexts.
Add a list to struct intel_engine_cs where we add all pinned contexts on
creation, and traverse that list at resume time to reset the pinned
contexts.
This fixes the kms_pipe_crc_basic@suspend-read-crc-pipe-a selftest for now,
but proper LMEM backup / restore is needed for full suspend functionality.
However, note that even with full LMEM backup / restore it may be
desirable to keep the reset since backing up the migrate context images
must happen using memcpy() after the migrate context has become inactive,
and for performance- and other reasons we want to avoid memcpy() from
LMEM.
Also traverse the list at guc_init_lrc_mapping() calling
guc_kernel_context_pin() for the pinned contexts, like is already done
for the kernel context.
v2:
- Don't reset the contexts on each __engine_unpark() but rather at
resume time (Chris Wilson).
v3:
- Reset contexts in the engine sanitize callback. (Chris Wilson)
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Brost Matthew <matthew.brost@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922062527.865433-6-thomas.hellstrom@linux.intel.com
|
|
Add GuC kernel doc for all structures added thus far for GuC submission
and update the main GuC submission section with the new interface
details.
v2:
- Drop guc_active.lock DOC
v3:
- Fixup a few kernel doc comments (Daniele)
v4 (Daniele):
- Implement doc suggestions from John
- Add kerneldoc for all members of the GuC structure and pull the file
in i915.rst
v5 (Daniele):
- Implement new doc suggestions from John
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-24-matthew.brost@intel.com
|
|
Now that we have locking hierarchy of sched_engine->lock ->
ce->guc_state everything from guc_active can be moved into guc_state and
protected the guc_state.lock.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-23-matthew.brost@intel.com
|
|
To make ownership of locking clear move fields (guc_id, guc_id_ref,
guc_id_link) to sub structure guc_id in intel_context.
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-22-matthew.brost@intel.com
|
|
Move GuC management fields in context under guc_active struct as this is
where the lock that protects theses fields lives. Also only set guc_prio
field once during context init.
v2:
(Daniele)
- set CONTEXT_SET_INIT
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-21-matthew.brost@intel.com
|
|
Drop pin count check trick between a sched_disable and re-pin, now rely
on the lock and counter of the number of committed requests to determine
if scheduling should be disabled on the context.
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-20-matthew.brost@intel.com
|
|
Rework and simplify the locking with GuC subission. Drop
sched_state_no_lock and move all fields under the guc_state.sched_state
and protect all these fields with guc_state.lock . This requires
changing the locking hierarchy from guc_state.lock -> sched_engine.lock
to sched_engine.lock -> guc_state.lock.
v2:
(Daniele)
- Don't check fields outside of lock during sched disable, check less
fields within lock as some of the outside are no longer needed
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-18-matthew.brost@intel.com
|
|
Move guc_blocked fence to struct guc_state as the lock which protects
the fence lives there.
s/ce->guc_blocked/ce->guc_state.blocked/g
v2:
(Daniele)
- s/blocked_fence/blocked/g
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-17-matthew.brost@intel.com
|
|
While debugging an issue with full GT resets I went down a rabbit hole
thinking the scrubbing of lost G2H wasn't working correctly. This proved
to be incorrect as this was working just fine but this chase inspired me
to write a selftest to prove that this works. This simple selftest
injects errors dropping various G2H and then issues a full GT reset
proving that the scrubbing of these G2H doesn't blow up.
v2:
(Daniel Vetter)
- Use ifdef instead of macros for selftests
v3:
(Checkpatch)
- A space after 'switch' statement
v4:
(Daniele)
- A comment saying GT won't idle if G2H are lost
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-12-matthew.brost@intel.com
|
|
Implement a simple static mapping algorithm of the i915 priority levels
(int, -1k to 1k exposed to user) to the 4 GuC levels. Mapping is as
follows:
i915 level < 0 -> GuC low level (3)
i915 level == 0 -> GuC normal level (2)
i915 level < INT_MAX -> GuC high level (1)
i915 level == INT_MAX -> GuC highest level (0)
We believe this mapping should cover the UMD use cases (3 distinct user
levels + 1 kernel level).
In addition to static mapping, a simple counter system is attached to
each context tracking the number of requests inflight on the context at
each level. This is needed as the GuC levels are per context while in
the i915 levels are per request.
v2:
(Daniele)
- Add BUILD_BUG_ON to enforce ordering of priority levels
- Add missing lockdep to guc_prio_fini
- Check for return before setting context registered flag
- Map DISPLAY priority or higher to highest guc prio
- Update comment for guc_prio
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-33-matthew.brost@intel.com
|
|
This adds GuC backend support for i915_request_cancel(), which in turn
makes CONFIG_DRM_I915_REQUEST_TIMEOUT work.
This implementation makes use of fence while there are likely simplier
options. A fence was chosen because of another feature coming soon
which requires a user to block on a context until scheduling is
disabled. In that case we return the fence to the user and the user can
wait on that fence.
v2:
(Daniele)
- A comment about locking the blocked incr / decr
- A comments about the use of the fence
- Update commit message explaining why fence
- Delete redundant check blocked count in unblock function
- Ring buffer implementation
- Comment about blocked in submission path
- Shorter rpm path
v3:
(Checkpatch)
- Fix typos in commit message
(Daniel)
- Rework to simplier locking structure in guc_context_block / unblock
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-26-matthew.brost@intel.com
|
|
When using GuC submission, if a context gets banned disable scheduling
and mark all inflight requests as complete.
Cc: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-25-matthew.brost@intel.com
|
|
Move active request tracking to a backend vfunc rather than assuming all
backends want to do this in the manner. In the of case execlists /
ring submission the tracking is on the physical engine while with GuC
submission it is on the context.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-8-matthew.brost@intel.com
|
|
Implement GuC virtual engines. Rather simple implementation, basically
just allocate an engine, setup context enter / exit function to virtual
engine specific functions, set all other variables / functions to guc
versions, and set the engine mask to that of all the siblings.
v2: Update to work with proto-ctx
v3:
(Daniele)
- Drop include, add comment to intel_virtual_engine_has_heartbeat
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-2-matthew.brost@intel.com
|
|
With GuC scheduling, it isn't safe to unpin a context while scheduling
is enabled for that context as the GuC may touch some of the pinned
state (e.g. LRC). To ensure scheduling isn't enabled when an unpin is
done, a call back is added to intel_context_unpin when pin count == 1
to disable scheduling for that context. When the response CTB is
received it is safe to do the final unpin.
Future patches may add a heuristic / delay to schedule the disable
call back to avoid thrashing on schedule enable / disable.
v2:
(John H)
- s/drm_dbg/drm_err
(Daneiel)
- Clean up sched state function
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-9-matthew.brost@intel.com
|
|
Sometimes during context pinning a context with the same guc_id is
registered with the GuC. In this a case deregister must be done before
the context can be registered. A fence is inserted on all requests while
the deregister is in flight. Once the G2H is received indicating the
deregistration is complete the context is registered and the fence is
released.
v2:
(John H)
- Fix commit message
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <john.c.harrison@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-8-matthew.brost@intel.com
|
|
Implement GuC context operations which includes GuC specific operations
alloc, pin, unpin, and destroy.
v2:
(Daniel Vetter)
- Use msleep_interruptible rather than cond_resched in busy loop
(Michal)
- Remove C++ style comment
v3:
(Matthew Brost)
- Drop GUC_ID_START
(John Harrison)
- Fix a bunch of typos
- Use drm_err rather than drm_dbg for G2H errors
(Daniele)
- Fix ;; typo
- Clean up sched state functions
- Add lockdep for guc_id functions
- Don't call __release_guc_id when guc_id is invalid
- Use MISSING_CASE
- Add comment in guc_context_pin
- Use shorter path to rpm
(Daniele / CI)
- Don't call release_guc_id on an invalid guc_id in destroy
v4:
(Daniel Vetter)
- Add FIXME comment
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-7-matthew.brost@intel.com
|
|
Implement GuC submission tasklet for new interface. The new GuC
interface uses H2G to submit contexts to the GuC. Since H2G use a single
channel, a single tasklet is used for the submission path.
Also the per engine interrupt handler has been updated to disable the
rescheduling of the physical engine tasklet, when using GuC scheduling,
as the physical engine tasklet is no longer used.
In this patch the field, guc_id, has been added to intel_context and is
not assigned. Patches later in the series will assign this value.
v2:
(John Harrison)
- Clean up some comments
v3:
(John Harrison)
- More comment cleanups
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-5-matthew.brost@intel.com
|
|
Previously, we were storing the ring size in the ring pointer before it
was actually allocated. We would then guard setting the ring size on
checking for CONTEXT_ALLOC_BIT. This is error-prone at best and really
only saves us a few bytes on something that already burns at least 4K.
Instead, this patch adds a new ring_size field and makes everything use
that.
v2 (Daniel Vetter):
- Replace 512 * SZ_4K with SZ_2M
v2 (Jason Ekstrand):
- Rebase on top of page migration code
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-3-jason@jlekstrand.net
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
Driver Changes:
- Prepare for local/device memory support on DG1 by starting
to use it for kernel internal allocations: context, ring
and engine scratch (Matt A, CQ, Abdiel, Imre)
- Sandybridge fix to avoid hard hang on ring resume (Chris)
- Limit imported dma-buf size to int32 (Matt A)
- Double check heartbeat timeout before resetting (Chris)
- Use new tasklet API for execution list (Emil)
- Fix SPDX checkpats warnings (Chris)
- Fixes for various checkpatch warnings (Chris)
- Selftest improvements (Chris)
- Move the defer_request waiter active assertion to correct spot (Chris)
- Make local-memory probing a GT operation (Matt, Tvrtko)
- Protect against request freeing during cancellation on wedging (Chris)
- Retire unexpected starting state error dumping (Chris)
- Distinction of memory regions in debugging (Zbigniew)
- Always flush the submission queue on checking for idle (Chris)
- Consolidate 2big error check to helper (Matt)
- Decrease number of subplatform bits (Tvrtko)
- Remove unused internal request priority levels (Chris)
- Document the unused internal header bits in buddy allocator (Matt)
- Cleanup the region class/instance encoding (Matt)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YGxksaZGXHnFxlwg@jlahtine-mobl.ger.corp.intel.com
|
|
Prepares the plumbing for setting request/fence expiration time. All code
is put in place but is never activated due yet missing ability to actually
configure the timer.
Outline of the basic operation:
A timer is started when request is ready for execution. If the request
completes (retires) before the timer fires, timer is cancelled and nothing
further happens.
If the timer fires request is added to a lockless list and worker queued.
Purpose of this is twofold: a) It allows request cancellation from a more
friendly context and b) coalesces multiple expirations into a single event
of consuming the list.
Worker locklessly consumes the list of expired requests and cancels them
all using previous added i915_request_cancel().
Associated timeout value is stored in rq->context.watchdog.timeout_us.
v2:
* Log expiration.
v3:
* Include more information about user timeline in the log message.
v4:
* Remove obsolete comment and fix formatting. (Matt)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324121335.2307063-6-tvrtko.ursulin@linux.intel.com
|
|
Clean up the SPDX licence declarations to comply with checkpatch.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122192913.4518-1-chris@chris-wilson.co.uk
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This allows us to remove pin_map from state allocation, which saves
us a few retry loops. We won't need this until first pin, anyway.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201231170405.22843-1-chris@chris-wilson.co.uk
|
|
If supported by the backend, we can quickly look at the context's
inflight engine rather than search along the active list to confirm.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201229144114.31686-1-chris@chris-wilson.co.uk
|
|
Inside schedule_out, we do extra work upon idling the context, such as
updating the runtime, kicking off retires, kicking virtual engines.
However, if we are in a series of processing single requests per
contexts, we may find ourselves scheduling out the context, only to
immediately schedule it back in during dequeue. This is just extra work
that we can avoid if we keep the context marked as inflight across the
dequeue. This becomes more significant later on for minimising virtual
engine misses.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201224135544.1713-4-chris@chris-wilson.co.uk
|
|
As we funnel more and more contexts into the breadcrumbs on an engine,
the hold time of b->irq_lock grows. As we may then contend with the
b->irq_lock during request submission, this increases the burden upon
the engine->active.lock and so directly impacts both our execution
latency and client latency. If we split the b->irq_lock by introducing a
per-context spinlock to manage the signalers within a context, we then
only need the b->irq_lock for enabling/disabling the interrupt and can
avoid taking the lock for walking the list of contexts within the signal
worker. Even with the current setup, this greatly reduces the number of
times we have to take and fight for b->irq_lock.
Furthermore, this closes the race between enabling the signaling context
while it is in the process of being signaled and removed:
<4>[ 416.208555] list_add corruption. prev->next should be next (ffff8881951d5910), but was dead000000000100. (prev=ffff8882781bb870).
<4>[ 416.208573] WARNING: CPU: 7 PID: 0 at lib/list_debug.c:28 __list_add_valid+0x4d/0x70
<4>[ 416.208575] Modules linked in: i915(+) vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio mei_hdcp x86_pkg_temp_thermal coretemp ax88179_178a usbnet mii crct10dif_pclmul snd_intel_dspcfg crc32_pclmul snd_hda_codec snd_hwdep ghash_clmulni_intel snd_hda_core e1000e snd_pcm ptp pps_core mei_me mei prime_numbers intel_lpss_pci [last unloaded: i915]
<4>[ 416.208611] CPU: 7 PID: 0 Comm: swapper/7 Tainted: G U 5.8.0-CI-CI_DRM_8852+ #1
<4>[ 416.208614] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake Y LPDDR4x T4 RVP TLC, BIOS ICLSFWR1.R00.3212.A00.1905212112 05/21/2019
<4>[ 416.208627] RIP: 0010:__list_add_valid+0x4d/0x70
<4>[ 416.208631] Code: c3 48 89 d1 48 c7 c7 60 18 33 82 48 89 c2 e8 ea e0 b6 ff 0f 0b 31 c0 c3 48 89 c1 4c 89 c6 48 c7 c7 b0 18 33 82 e8 d3 e0 b6 ff <0f> 0b 31 c0 c3 48 89 f2 4c 89 c1 48 89 fe 48 c7 c7 00 19 33 82 e8
<4>[ 416.208633] RSP: 0018:ffffc90000280e18 EFLAGS: 00010086
<4>[ 416.208636] RAX: 0000000000000000 RBX: ffff888250a44880 RCX: 0000000000000105
<4>[ 416.208639] RDX: 0000000000000105 RSI: ffffffff82320c5b RDI: 00000000ffffffff
<4>[ 416.208641] RBP: ffff8882781bb870 R08: 0000000000000000 R09: 0000000000000001
<4>[ 416.208643] R10: 00000000054d2957 R11: 000000006abbd991 R12: ffff8881951d58c8
<4>[ 416.208646] R13: ffff888286073880 R14: ffff888286073848 R15: ffff8881951d5910
<4>[ 416.208669] FS: 0000000000000000(0000) GS:ffff88829c180000(0000) knlGS:0000000000000000
<4>[ 416.208671] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 416.208673] CR2: 0000556231326c48 CR3: 0000000005610001 CR4: 0000000000760ee0
<4>[ 416.208675] PKRU: 55555554
<4>[ 416.208677] Call Trace:
<4>[ 416.208679] <IRQ>
<4>[ 416.208751] i915_request_enable_breadcrumb+0x278/0x400 [i915]
<4>[ 416.208839] __i915_request_submit+0xca/0x2a0 [i915]
<4>[ 416.208892] __execlists_submission_tasklet+0x480/0x1830 [i915]
<4>[ 416.208942] execlists_submission_tasklet+0xc4/0x130 [i915]
<4>[ 416.208947] tasklet_action_common.isra.17+0x6c/0x1c0
<4>[ 416.208954] __do_softirq+0xdf/0x498
<4>[ 416.208960] ? handle_fasteoi_irq+0x150/0x150
<4>[ 416.208964] asm_call_on_stack+0xf/0x20
<4>[ 416.208966] </IRQ>
<4>[ 416.208969] do_softirq_own_stack+0xa1/0xc0
<4>[ 416.208972] irq_exit_rcu+0xb5/0xc0
<4>[ 416.208976] common_interrupt+0xf7/0x260
<4>[ 416.208980] asm_common_interrupt+0x1e/0x40
<4>[ 416.208985] RIP: 0010:cpuidle_enter_state+0xb6/0x410
<4>[ 416.208987] Code: 00 31 ff e8 9c 3e 89 ff 80 7c 24 0b 00 74 12 9c 58 f6 c4 02 0f 85 31 03 00 00 31 ff e8 e3 6c 90 ff e8 fe a4 94 ff fb 45 85 ed <0f> 88 c7 02 00 00 49 63 c5 4c 2b 24 24 48 8d 14 40 48 8d 14 90 48
<4>[ 416.208989] RSP: 0018:ffffc90000143e70 EFLAGS: 00000206
<4>[ 416.208991] RAX: 0000000000000007 RBX: ffffe8ffffda8070 RCX: 0000000000000000
<4>[ 416.208993] RDX: 0000000000000000 RSI: ffffffff8238b4ee RDI: ffffffff8233184f
<4>[ 416.208995] RBP: ffffffff826b4e00 R08: 0000000000000000 R09: 0000000000000000
<4>[ 416.208997] R10: 0000000000000001 R11: 0000000000000000 R12: 00000060e7f24a8f
<4>[ 416.208998] R13: 0000000000000003 R14: 0000000000000003 R15: 0000000000000003
<4>[ 416.209012] cpuidle_enter+0x24/0x40
<4>[ 416.209016] do_idle+0x22f/0x2d0
<4>[ 416.209022] cpu_startup_entry+0x14/0x20
<4>[ 416.209025] start_secondary+0x158/0x1a0
<4>[ 416.209030] secondary_startup_64+0xa4/0xb0
<4>[ 416.209039] irq event stamp: 10186977
<4>[ 416.209042] hardirqs last enabled at (10186976): [<ffffffff810b9363>] tasklet_action_common.isra.17+0xe3/0x1c0
<4>[ 416.209044] hardirqs last disabled at (10186977): [<ffffffff81a5e5ed>] _raw_spin_lock_irqsave+0xd/0x50
<4>[ 416.209047] softirqs last enabled at (10186968): [<ffffffff810b9a1a>] irq_enter_rcu+0x6a/0x70
<4>[ 416.209049] softirqs last disabled at (10186969): [<ffffffff81c00f4f>] asm_call_on_stack+0xf/0x20
<4>[ 416.209317] list_del corruption, ffff8882781bb870->next is LIST_POISON1 (dead000000000100)
<4>[ 416.209317] WARNING: CPU: 7 PID: 46 at lib/list_debug.c:47 __list_del_entry_valid+0x4e/0x90
<4>[ 416.209317] Modules linked in: i915(+) vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio mei_hdcp x86_pkg_temp_thermal coretemp ax88179_178a usbnet mii crct10dif_pclmul snd_intel_dspcfg crc32_pclmul snd_hda_codec snd_hwdep ghash_clmulni_intel snd_hda_core e1000e snd_pcm ptp pps_core mei_me mei prime_numbers intel_lpss_pci [last unloaded: i915]
<4>[ 416.209317] CPU: 7 PID: 46 Comm: ksoftirqd/7 Tainted: G U W 5.8.0-CI-CI_DRM_8852+ #1
<4>[ 416.209317] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake Y LPDDR4x T4 RVP TLC, BIOS ICLSFWR1.R00.3212.A00.1905212112 05/21/2019
<4>[ 416.209317] RIP: 0010:__list_del_entry_valid+0x4e/0x90
<4>[ 416.209317] Code: 2e 48 8b 32 48 39 fe 75 3a 48 8b 50 08 48 39 f2 75 48 b8 01 00 00 00 c3 48 89 fe 48 89 c2 48 c7 c7 38 19 33 82 e8 62 e0 b6 ff <0f> 0b 31 c0 c3 48 89 fe 48 c7 c7 70 19 33 82 e8 4e e0 b6 ff 0f 0b
<4>[ 416.209317] RSP: 0018:ffffc90000280de8 EFLAGS: 00010086
<4>[ 416.209317] RAX: 0000000000000000 RBX: ffff8882781bb848 RCX: 0000000000010104
<4>[ 416.209317] RDX: 0000000000010104 RSI: ffffffff8238b4ee RDI: 00000000ffffffff
<4>[ 416.209317] RBP: ffff8882781bb880 R08: 0000000000000000 R09: 0000000000000001
<4>[ 416.209317] R10: 000000009fb6666e R11: 00000000feca9427 R12: ffffc90000280e18
<4>[ 416.209317] R13: ffff8881951d5930 R14: dead0000000000d8 R15: ffff8882781bb880
<4>[ 416.209317] FS: 0000000000000000(0000) GS:ffff88829c180000(0000) knlGS:0000000000000000
<4>[ 416.209317] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 416.209317] CR2: 0000556231326c48 CR3: 0000000005610001 CR4: 0000000000760ee0
<4>[ 416.209317] PKRU: 55555554
<4>[ 416.209317] Call Trace:
<4>[ 416.209317] <IRQ>
<4>[ 416.209317] remove_signaling_context.isra.13+0xd/0x70 [i915]
<4>[ 416.209513] signal_irq_work+0x1f7/0x4b0 [i915]
This is caused by virtual engines where although we take the breadcrumb
lock on each of the active engines, they may be different engines on
different requests, It turns out that the b->irq_lock was not a
sufficient proxy for the engine->active.lock in the case of more than
one request, so introduce an explicit lock around ce->signals.
v2: ce->signal_lock is acquired with only RCU protection and so must be
treated carefully and not cleared during reallocation. We also then need
to confirm that the ce we lock is the same as we found in the breadcrumb
list.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2276
Fixes: c18636f76344 ("drm/i915: Remove requirement for holding i915_request.lock for breadcrumbs")
Fixes: 2854d866327a ("drm/i915/gt: Replace intel_engine_transfer_stale_breadcrumbs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201126140407.31952-4-chris@chris-wilson.co.uk
|
|
Allow a brief period for continued access to a dead intel_context by
deferring the release of the struct until after an RCU grace period.
As we are using a dedicated slab cache for the contexts, we can defer
the release of the slab pages via RCU, with the caveat that individual
structs may be reused from the freelist within an RCU grace period. To
handle that, we have to avoid clearing members of the zombie struct.
This is required for a later patch to handle locking around virtual
requests in the signaler, as those requests may want to move between
engines and be destroyed while we are holding b->irq_lock on a physical
engine.
v2: Drop mutex_reinit(), if we never mark the mutex as destroyed we
don't need to reset the debug code, at the loss of having the mutex
debug code spot us attempting to destroy a locked mutex.
v3: As the intended use will remain strongly referenced counted, with
very little inflight access across reuse, drop the ctor.
v4: Drop the unrequired change to remove the temporary reference around
dropping the active context, and add back some more missing ctor
operations.
v5: The ctor is back. Tvrtko spotted that ce->signal_lock [introduced
later] maybe accessed under RCU and so needs special care not to be
reinitialised.
v6: Don't mix SLAB_TYPESAFE_BY_RCU and RCU list iteration.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201126140407.31952-3-chris@chris-wilson.co.uk
|
|
As a preparation step for full object locking and wait/wound handling
during pin and object mapping, ensure that we always pass the ww context
in i915_gem_execbuffer.c to i915_vma_pin, use lockdep to ensure this
happens.
This also requires changing the order of eb_parse slightly, to ensure
we pass ww at a point where we could still handle -EDEADLK safely.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-15-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Instead of doing everything inside of pin_mutex, we move all pinning
outside. Because i915_active has its own reference counting and
pinning is also having the same issues vs mutexes, we make sure
everything is pinned first, so the pinning in i915_active only needs
to bump refcounts. This allows us to take pin refcounts correctly
all the time.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-14-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
The bspec is confusing on the nature of the upper 32bits of the LRC
descriptor. Once upon a time, it said that it uses the upper 32b to
decide if it should perform a lite-restore, and so we must ensure that
each unique context submitted to HW is given a unique CCID [for the
duration of it being on the HW]. Currently, this is achieved by using
a small circular tag, and assigning every context submitted to HW a
new id. However, this tag is being cleared on repinning an inflight
context such that we end up re-using the 0 tag for multiple contexts.
To avoid accidentally clearing the CCID in the upper 32bits of the LRC
descriptor, split the descriptor into two dwords so we can update the
GGTT address separately from the CCID.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1796
Fixes: 2935ed5339c4 ("drm/i915: Remove logical HW ID")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428184751.11257-1-chris@chris-wilson.co.uk
|
|
Restoration of a previous timestamp can collide
with updating the timestamp, causing a value corruption.
Combat this issue by using indirect ctx bb to
modify the context image during restoring process.
We can preload value into scratch register. From which
we then do the actual write with LRR. LRR is faster and
thus less error prone as probability of race drops.
v2: tidying (Chris)
v3: lrr for all engines
v4: grp
v5: reg bit
v6: wa_bb_offset, virtual engines (Chris)
References: HSDES#16010904313
Testcase: igt/i915_selftest/gt_lrc
Suggested-by: Joseph Koston <joseph.koston@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424230546.30271-1-mika.kuoppala@linux.intel.com
|
|
I need to keep the GEM context around a bit longer so adding an explicit
flag for syncing execbuf with closed/abandonded contexts.
v2:
* Use already available context flags. (Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200319170707.8262-1-chris@chris-wilson.co.uk
|
|
When being used across multiple real engines inside a virtual engine,
the intel_context.inflight is updated atomically, and so we must
annotate the racy read from outside the owning context.
[11142.482846] BUG: KCSAN: data-race in __execlists_submission_tasklet [i915] / __execlists_submission_tasklet [i915]
[11142.482867]
[11142.482878] write (marked) to 0xffff8881f257b5e0 of 8 bytes by interrupt on cpu 2:
[11142.483107] __execlists_submission_tasklet+0x1d33/0x2120 [i915]
[11142.483336] execlists_submission_tasklet+0xd3/0x170 [i915]
[11142.483355] tasklet_action_common.isra.0+0x42/0xa0
[11142.483371] __do_softirq+0xd7/0x2cd
[11142.483384] irq_exit+0xbe/0xe0
[11142.483401] do_IRQ+0x51/0x100
[11142.483424] ret_from_intr+0x0/0x1c
[11142.483446] do_idle+0x133/0x1f0
[11142.483465] cpu_startup_entry+0x14/0x16
[11142.483483] start_secondary+0x120/0x180
[11142.483498] secondary_startup_64+0xa4/0xb0
[11142.483512]
[11142.483528] read to 0xffff8881f257b5e0 of 8 bytes by interrupt on cpu 1:
[11142.483755] __execlists_submission_tasklet+0x14e/0x2120 [i915]
[11142.483981] execlists_submission_tasklet+0xd3/0x170 [i915]
[11142.483999] tasklet_action_common.isra.0+0x42/0xa0
[11142.484014] __do_softirq+0xd7/0x2cd
[11142.484028] do_softirq_own_stack+0x2a/0x40
[11142.484046] do_softirq.part.0+0x26/0x30
[11142.484071] __local_bh_enable_ip+0x46/0x50
[11142.484299] i915_gem_do_execbuffer+0x39c1/0x4e50 [i915]
[11142.484528] i915_gem_execbuffer2_ioctl+0x2c3/0x580 [i915]
[11142.484546] drm_ioctl_kernel+0xe4/0x120
[11142.484559] drm_ioctl+0x297/0x4c7
[11142.484572] ksys_ioctl+0x89/0xb0
[11142.484586] __x64_sys_ioctl+0x42/0x60
[11142.484610] do_syscall_64+0x6e/0x2c0
[11142.484627] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310141320.24149-1-chris@chris-wilson.co.uk
|
|
GPU saves accumulated context runtime (in CS timestamp units) in PPHWSP
which will be useful for us in cases when we are not able to track context
busyness ourselves (like with GuC). Keep a copy of this in struct
intel_context from where it can be easily read even if the context is not
pinned.
v2:
(Chris)
* Do not store pphwsp address in intel_context.
* Log CS wrap-around.
* Simplify calculation by relying on integer wraparound.
v3:
* Include total/avg in traces and error state for debugging
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200216133620.394962-1-chris@chris-wilson.co.uk
|
