summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/gma500/power.c
AgeCommit message (Collapse)AuthorFilesLines
2022-09-17drm/gma500: Remove unnecessary suspend/resume wrappersHans de Goede1-25/+0
The psb_runtime_suspend/resume/thaw/freeze/restore functions are all just 1:1 wrappers around gma_power_suspend/_resume. Drop these wrappers and use the DEFINE_RUNTIME_DEV_PM_OPS() macro to define the dev_pm_ops struct. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220909115646.99920-7-hdegoede@redhat.com
2022-09-17drm/gma500: Rewrite power management codeHans de Goede1-103/+30
Rewrite the power.c code. For some reason this was doing locking + refcounting + state (suspended or not) bookkeeping all by itself. But there is no reason for this, this is all taken care of by the runtime-pm core, through pm_runtime_get()/_put(). Besides this not being necessary the DIY code is also quite weird/ buggy in some places. E.g. power_begin() would manually do a resume when not resumed already and force_on=true, followed by a pm_runtime_get(), which will cause a call to gma_power_resume() to get scheduled which would redo the entire resume again. Which can all be replaced by a single pm_runtime_get_sync() call. Note that this is just a cleanup, this does not actually fix the (disabled through #if 0) runtime-pm support. It does now call pm_runtime_enable(), but only after doing a pm_runtime_get() at probe-time, so the device is never runtime suspended. Doing this permanent get() + enable() instead of not calling enable() at all is necessary for the pm_runtime_get_if_in_use() call in gma_power_begin() to work properly. Note this also removes the gma_power_is_on() call a check like this without actually holding a reference is always racy, so it is a bad idea (and therefor has no pm_runtime_foo() equivalent). The 2 code paths which were using gma_power_is_on() are actually both guaranteed to only run when the device is powered-on so the 2 checks can simply be dropped. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220909115646.99920-6-hdegoede@redhat.com
2022-09-17drm/gma500: Fix (vblank) IRQs not working after suspend/resumeHans de Goede1-7/+1
Fix gnome-shell (and other page-flip users) hanging after suspend/resume because of the gma500's IRQs not working. This fixes 2 problems with the IRQ handling: 1. gma_power_off() calls gma_irq_uninstall() which does a free_irq(), but gma_power_on() called gma_irq_preinstall() + gma_irq_postinstall() which do not call request_irq. Replace the pre- + post-install calls with gma_irq_install() which does prep + request + post. 2. After fixing 1. IRQs still do not work on a Packard Bell Dot SC (Intel Atom N2600, cedarview) netbook. Cederview uses MSI interrupts and it seems that the BIOS re-configures things back to normal APIC based interrupts during S3 suspend. There is some MSI PCI-config registers save/restore code which tries to deal with this, but on the Packard Bell Dot SC this is not sufficient to restore MSI IRQ functionality after a suspend/resume. Replace the PCI-config registers save/restore with pci_disable_msi() on suspend + pci_enable_msi() on resume. Fixing e.g. gnome-shell hanging. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220906203852.527663-4-hdegoede@redhat.com (cherry picked from commit 235fdbc32d559db21e580f85035c59372704f09e)
2022-03-17drm/gma500: Cosmetic cleanup of irq codePatrik Jakobsson1-5/+5
Use the gma_ prefix instead of psb_ since the code is common for all chips. Various coding style fixes. Removal of unused code. Removal of duplicate function declarations. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220317092555.17882-4-patrik.r.jakobsson@gmail.com
2022-03-16drm/gma500: Move GEM memory management functions to gem.cThomas Zimmermann1-0/+1
Move GEM functions from gtt.c to gem.c. Adapt some names. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220308195222.13471-11-tzimmermann@suse.de
2022-03-16drm/gma500: Inline psb_gtt_restore()Thomas Zimmermann1-1/+3
Inline psb_gtt_restore() into its only caller in power.c. Perform the GTT restoration in psb_gem_mm_resume(). The restoration step is part of GEM anyway and will be moved over at some point. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220308195222.13471-10-tzimmermann@suse.de
2021-09-23drm/gma500: Replace references to dev_private with helper functionThomas Zimmermann1-10/+10
Replace most references to struct drm_device.dev_private with the new helper function to_drm_psb_private(). The only references left are in assignments and the helper itself. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210920141051.30988-2-tzimmermann@suse.de
2021-08-10drm/gma500: Convert to Linux IRQ interfacesThomas Zimmermann1-0/+1
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers don't benefit from using it. DRM IRQ callbacks are now being called directly or inlined. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-6-tzimmermann@suse.de
2021-04-08gma500: Use DEFINE_SPINLOCK() for spinlockGuobin Huang1-2/+1
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Guobin Huang <huangguobin4@huawei.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1617710114-48071-1-git-send-email-huangguobin4@huawei.com
2021-01-18drm/gma500/power: Remove excess param description 'state'Lee Jones1-1/+0
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/gma500/power.c:190: warning: Excess function parameter 'state' description in 'gma_power_suspend' Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Benjamin Defnet <benjamin.r.defnet@intel.com> Cc: Rajesh Poornachandran <rajesh.poornachandran@intel.com> Cc: Alan Cox <alan@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-39-lee.jones@linaro.org
2021-01-18drm/gma500/power: Fix a bunch of *dev documentation issuesLee Jones1-3/+4
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/gma500/power.c:101: warning: Function parameter or member 'pdev' not described in 'gma_resume_display' drivers/gpu/drm/gma500/power.c:155: warning: Function parameter or member 'pdev' not described in 'gma_resume_pci' drivers/gpu/drm/gma500/power.c:155: warning: Excess function parameter 'dev' description in 'gma_resume_pci' drivers/gpu/drm/gma500/power.c:189: warning: Function parameter or member '_dev' not described in 'gma_power_suspend' drivers/gpu/drm/gma500/power.c:189: warning: Excess function parameter 'pdev' description in 'gma_power_suspend' drivers/gpu/drm/gma500/power.c:189: warning: Excess function parameter 'state' description in 'gma_power_suspend' drivers/gpu/drm/gma500/power.c:216: warning: Function parameter or member '_dev' not described in 'gma_power_resume' drivers/gpu/drm/gma500/power.c:216: warning: Excess function parameter 'pdev' description in 'gma_power_resume' Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Benjamin Defnet <benjamin.r.defnet@intel.com> Cc: Rajesh Poornachandran <rajesh.poornachandran@intel.com> Cc: Alan Cox <alan@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-20-lee.jones@linaro.org
2021-01-06drm/gma500: Remove references to struct drm_device.pdevThomas Zimmermann1-6/+7
Using struct drm_device.pdev is deprecated. Convert gma500 to struct drm_device.dev. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201201103542.2182-8-tzimmermann@suse.de
2016-01-04drm/gma500: use to_pci_dev()Geliang Tang1-2/+2
Use to_pci_dev() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-07drm/gma500: Add hooks for hibernationPatrik Jakobsson1-0/+15
Currently we do whatever is done during suspend/resume but we might need some more work for hibernation so keep them in separate functions. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-04-07drm/gma500: Activate the gtt rebuild on suspend/resumePatrik Jakobsson1-0/+2
This patch activates the rebuilding of the gtt. Currently we reinitialize the gtt by inserting the stolen pages again and map the rest to our scratch page. Then we go about restoring the needed ranges. This is a bit overkill but right now we don't have that much to restore so better safe than sorry. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2012-03-15gma500: suspend/resume support for CedartrailAlan Cox1-1/+2
Update our tree to match the current driver head. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-15gma500: Fix resume pathsAlan Cox1-3/+0
We fall apart somewhat on resume because we don't invoke all the resume methods as we should. Fix the silly error in the logic. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-10gma500: make init_pm callback in struct psb_op optionalKirill A. Shutemov1-1/+2
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-10gma500: now move the Oaktrail save state into its own structureAlan Cox1-4/+4
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-06gma500: Fix backlight crashAlan Cox1-1/+1
Initial changes to get backlight behaviour we want and to fix backlight crashes on suspend/resume paths. [Note: on some boxes this will now produce a warning about the backlight, this isn't a regression it's an unfixed but non harmful case I still need to nail] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-16gma500: Add device frameworkAlan Cox1-0/+316
The devices have various internal differences so we have some abstractions to hide the ugly differences and we then wrap them up in standard interfaces. Add these bits Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-13 01:24:11 +0000