summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/gma500/oaktrail_crtc.c
AgeCommit message (Collapse)AuthorFilesLines
2013-11-08drm/gma500/mrst: Replace WMs and chickenbits with values from EMGDPatrik Jakobsson1-7/+6
For the minnowboard to work the values found in EMGD are required. This might break Oaktrail but without hardware to test with I cannot really tell (and do not really care). Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-11-08drm/gma500/mrst: Properly route oaktrail hdmi hooksPatrik Jakobsson1-2/+2
Since we can have SDVO on Pipe B we better check the output type instead of pipe number for Oaktrail HDMI. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-11-08drm/gma500/mrst: Add aux register writes when programming pipePatrik Jakobsson1-106/+135
On SDVO pipes (always Pipe B on mrst) we have to sequentially write the aux vdc. We might be able to skip programming the primary vdc in some/most places but we don't care about that now. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-11-08drm/gma500/mrst: Add SDVO clock calculationPatrik Jakobsson1-49/+126
We start off by adding SDVO limits and converting all limits to the generic gma_limit_t stuct. Then we separate clock calculations for LVDS and SDVO. This will be cleaned up later but keep it simple for now. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-07-24drm/gma500: Rename psb_intel_encoder to gma_encoderPatrik Jakobsson1-4/+4
The psb_intel_encoder is generic and should be named appropriately Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-07-24drm/gma500: Rename psb_intel_crtc to gma_crtcPatrik Jakobsson1-8/+8
The psb_intel_crtc is generic and should be named appropriately Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-07-24drm/gma500: Convert to generic encoder funcsPatrik Jakobsson1-1/+1
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-07-24drm/gma500/oak: Use identical generic crtc funcsPatrik Jakobsson1-22/+3
Use the generic gma functions instead of the oaktrail functions where they are identical. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-07-24drm/gma500: Convert to generic gamma funcsPatrik Jakobsson1-1/+1
This takes care of the remaining chips using the old generic code. We don't check if the pipe number is valid but the old code peeked in the register map before checking anyways so just ignore it. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-07-24drm/gma500: Make all chips use gma_wait_for_vblankPatrik Jakobsson1-3/+3
Also remove the duplicated oaktrail function. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-07-24drm/gma500: Make use of gma_pipe_has_type()Patrik Jakobsson1-3/+3
Replace any use of xxx_intel_pipe_has_type() with the generic gma_pipe_has_type() function. Poulsbo still use it but that will be removed when we rip out psb_intel_pipe_has_type(). Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2012-11-30drm/gma500: drm_connector_property -> drm_object_propertyRob Clark1-1/+1
Signed-off-by: Rob Clark <rob@ti.com>
2012-11-07gma600: Enable HDMI supportAlan Cox1-0/+8
There are still some mysteries left, in particular how (and in fact if) the EDID is supposed to work on the HDMI port. However the basic stuff now works and I can plug my Q550 into an HDMI display and get the expected results. [v2: cleans up space/tab and other formatting as per Dave's request] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-07-19drm: Make the .mode_fixup() operations mode argument a const pointerLaurent Pinchart1-1/+1
The passed mode must not be modified by the operation, make it const. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-11gma500: use the register map to clean upAlan Cox1-74/+60
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-10gma500: oaktrail_crtc: drop unused variablesKirill A. Shutemov1-10/+1
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-10gma500: oaktrail_crtc: mark few functions as staticKirill A. Shutemov1-2/+2
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-10gma500: clean up some of the struct fields we no longer useAlan Cox1-3/+0
Some this is Medfield stuff that may reappear in some form later, other bits are just dead stuff Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20gma500: Convert Oaktrail to work with new output handlingPatrik Jakobsson1-9/+9
Replace psb_intel_output with psb_intel_encoder and psb_intel_connector Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> [Changed Moorestown reference to Oaktrail] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20drm: Replace pitch with pitches[] in drm_framebufferVille Syrjälä1-2/+2
Otherwise each driver would need to keep the information inside their own framebuffer object structure. Also add offsets[]. BOs on the other hand are driver specific, so those can be kept in driver specific structures. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-06gma500: do a pass over the FIXME tagsAlan Cox1-11/+5
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-16gma500: Add Oaktrail supportAlan Cox1-0/+610
Oaktrail (GMA600) is found on some tablet/slate PC type systems. It's a bit different to the GMA500 but similar enough it makes sense to plug it into the same driver. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-18 00:29:05 +0000