summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/exynos
AgeCommit message (Collapse)AuthorFilesLines
2016-10-25Merge tag 'topic/drm-misc-2016-10-24' of ↵Dave Airlie1-1/+2
git://anongit.freedesktop.org/drm-intel into drm-next First -misc pull for 4.10: - drm_format rework from Laurent - reservation patches from Chris that missed 4.9. - aspect ratio support in infoframe helpers and drm mode/edid code (Shashank Sharma) - rotation rework from Ville (first parts at least) - another attempt at the CRC debugfs interface from Tomeu - piles and piles of misc patches all over * tag 'topic/drm-misc-2016-10-24' of git://anongit.freedesktop.org/drm-intel: (55 commits) drm: Use u64 for intermediate dotclock calculations drm/i915: Use the per-plane rotation property drm/omap: Use per-plane rotation property drm/omap: Set rotation property initial value to BIT(DRM_ROTATE_0) insted of 0 drm/atmel-hlcdc: Use per-plane rotation property drm/arm: Use per-plane rotation property drm: Add support for optional per-plane rotation property drm/atomic: Reject attempts to use multiple rotation angles at once drm: Add drm_rotation_90_or_270() dma-buf/sync_file: hold reference to fence when creating sync_file drm/virtio: kconfig: Fixup white space. drm/fence: release fence reference when canceling event drm/i915: Handle early failure during intel_get_load_detect_pipe drm/fb_cma_helper: do not free fbdev if there is none drm: fix sparse warnings on undeclared symbols in crc debugfs gpu: Remove depends on RESET_CONTROLLER when not a provider i915: don't call drm_atomic_state_put on invalid pointer drm: Don't export the drm_fb_get_bpp_depth() function drm/arm: mali-dp: Replace drm_fb_get_bpp_depth() with drm_format_plane_cpp() drm: vmwgfx: Replace drm_fb_get_bpp_depth() with drm_format_info() ...
2016-10-19mm: replace get_vaddr_frames() write/force parameters with gup_flagsLorenzo Stoakes1-1/+2
This removes the 'write' and 'force' from get_vaddr_frames() and replaces them with 'gup_flags' to make the use of FOLL_FORCE explicit in callers as use of this flag can result in surprising behaviour (and hence bugs) within the mm subsystem. Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-17drm: Add reference counting to drm_atomic_stateChris Wilson1-1/+2
drm_atomic_state has a complicated single owner model that tracks the single reference from allocation through to destruction on another thread - or perhaps on a local error path. We can simplify this tracking by using reference counting (at a cost of a few more atomics). This is even more beneficial when the lifetime of the state becomes more convoluted than being passed to a single worker thread for the commit. v2: Double check !intel atomic_commit functions for missing gets v3: Update kerneldocs Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161014121833.439-27-chris@chris-wilson.co.uk
2016-10-11Merge tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds12-327/+353
Pull drm updates from Dave Airlie: "Core: - Fence destaging work - DRIVER_LEGACY to split off legacy drm drivers - drm_mm refactoring - Splitting drm_crtc.c into chunks and documenting better - Display info fixes - rbtree support for prime buffer lookup - Simple VGA DAC driver Panel: - Add Nexus 7 panel - More simple panels i915: - Refactoring GEM naming - Refactored vma/active tracking - Lockless request lookups - Better stolen memory support - FBC fixes - SKL watermark fixes - VGPU improvements - dma-buf fencing support - Better DP dongle support amdgpu: - Powerplay for Iceland asics - Improved GPU reset support - UVD/VEC powergating support for CZ/ST - Preinitialised VRAM buffer support - Virtual display support - Initial SI support - GTT rework - PCI shutdown callback support - HPD IRQ storm fixes amdkfd: - bugfixes tilcdc: - Atomic modesetting support mediatek: - AAL + GAMMA engine support - Hook up gamma LUT - Temporal dithering support imx: - Pixel clock from devicetree - drm bridge support for LVDS bridges - active plane reconfiguration - VDIC deinterlacer support - Frame synchronisation unit support - Color space conversion support analogix: - PSR support - Better panel on/off support rockchip: - rk3399 vop/crtc support - PSR support vc4: - Interlaced vblank timing - 3D rendering CPU overhead reduction - HDMI output fixes tda998x: - HDMI audio ASoC support sunxi: - Allwinner A33 support - better TCON support msm: - DT binding cleanups - Explicit fence-fd support sti: - remove sti415/416 support etnaviv: - MMUv2 refactoring - GC3000 support exynos: - Refactoring HDMI DCC/PHY - G2D pm regression fix - Page fault issues with wait for vblank There is no nouveau work in this tree, as Ben didn't get a pull request in, and he was fighting moving to atomic and adding mst support, so maybe best it waits for a cycle" * tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linux: (1412 commits) drm/crtc: constify drm_crtc_index parameter drm/i915: Fix conflict resolution from backmerge of v4.8-rc8 to drm-next drm/i915/guc: Unwind GuC workqueue reservation if request construction fails drm/i915: Reset the breadcrumbs IRQ more carefully drm/i915: Force relocations via cpu if we run out of idle aperture drm/i915: Distinguish last emitted request from last submitted request drm/i915: Allow DP to work w/o EDID drm/i915: Move long hpd handling into the hotplug work drm/i915/execlists: Reinitialise context image after GPU hang drm/i915: Use correct index for backtracking HUNG semaphores drm/i915: Unalias obj->phys_handle and obj->userptr drm/i915: Just clear the mmiodebug before a register access drm/i915/gen9: only add the planes actually affected by ddb changes drm/i915: Allow PCH DPLL sharing regardless of DPLL_SDVO_HIGH_SPEED drm/i915/bxt: Fix HDMI DPLL configuration drm/i915/gen9: fix the watermark res_blocks value drm/i915/gen9: fix plane_blocks_per_line on watermarks calculations drm/i915/gen9: minimum scanlines for Y tile is not always 4 drm/i915/gen9: fix the WaWmMemoryReadLatency implementation drm/i915/kbl: KBL also needs to run the SAGV code ...
2016-10-11Merge tag 'media/v4.9-1' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Documentation improvements: conversion of all non-DocBook documents to Sphinx and lots of fixes to the uAPI media book - New PCI driver for Techwell TW5864 media grabber boards - New SoC driver for ATMEL Image Sensor Controller - Removal of some obsolete SoC drivers (s5p-tv driver and soc_camera drivers) - Addition of ST CEC driver - Lots of drivers fixes, improvements and additions * tag 'media/v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (464 commits) [media] ttusb_dec: avoid the risk of go past buffer [media] cx23885: Fix some smatch warnings [media] si2165: switch to regmap [media] si2165: use i2c_client->dev instead of i2c_adapter->dev for logging [media] si2165: Remove legacy attach [media] cx231xx: attach si2165 driver via i2c_client [media] cx231xx: Prepare for attaching new style i2c_client DVB demod drivers [media] cx23885: attach si2165 driver via i2c_client [media] si2165: support i2c_client attach [media] si2165: avoid division by zero [media] rcar-vin: add R-Car gen2 fallback compatibility string [media] lgdt3306a: remove 20*50 msec unnecessary timeout [media] cx25821: Remove deprecated create_singlethread_workqueue [media] cx25821: Drop Freeing of Workqueue [media] cxd2841er: force 8MHz bandwidth for DVB-C if specified bw not supported [media] redrat3: hardware-specific parameters [media] redrat3: remove hw_timeout member [media] cxd2841er: BER and SNR reading for ISDB-T [media] dvb-usb: avoid link error with dib3000m{b,c| [media] dvb-usb: split out common parts of dibusb ...
2016-10-11Merge tag 'iommu-updates-v4.9' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - support for interrupt virtualization in the AMD IOMMU driver. These patches were shared with the KVM tree and are already merged through that tree. - generic DT-binding support for the ARM-SMMU driver. With this the driver now makes use of the generic DMA-API code. This also required some changes outside of the IOMMU code, but these are acked by the respective maintainers. - more cleanups and fixes all over the place. * tag 'iommu-updates-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (40 commits) iommu/amd: No need to wait iommu completion if no dte irq entry change iommu/amd: Free domain id when free a domain of struct dma_ops_domain iommu/amd: Use standard bitmap operation to set bitmap iommu/amd: Clean up the cmpxchg64 invocation iommu/io-pgtable-arm: Check for v7s-incapable systems iommu/dma: Avoid PCI host bridge windows iommu/dma: Add support for mapping MSIs iommu/arm-smmu: Set domain geometry iommu/arm-smmu: Wire up generic configuration support Docs: dt: document ARM SMMU generic binding usage iommu/arm-smmu: Convert to iommu_fwspec iommu/arm-smmu: Intelligent SMR allocation iommu/arm-smmu: Add a stream map entry iterator iommu/arm-smmu: Streamline SMMU data lookups iommu/arm-smmu: Refactor mmu-masters handling iommu/arm-smmu: Keep track of S2CR state iommu/arm-smmu: Consolidate stream map entry state iommu/arm-smmu: Handle stream IDs more dynamically iommu/arm-smmu: Set PRIVCFG in stage 1 STEs iommu/arm-smmu: Support non-PCI devices with SMMUv3 ...
2016-10-05Merge tag 'v4.8' into patchworkMauro Carvalho Chehab5-107/+18
Linux 4.8 * tag 'v4.8': (1761 commits) Linux 4.8 ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7 MIPS: CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systems include/linux/property.h: fix typo/compile error ocfs2: fix deadlock on mmapped page in ocfs2_write_begin_nolock() mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page() MAINTAINERS: Switch to kernel.org email address for Javi Merino x86/entry/64: Fix context tracking state warning when load_gs_index fails x86/boot: Initialize FPU and X86_FEATURE_ALWAYS even if we don't have CPUID x86/vdso: Fix building on big endian host x86/boot: Fix another __read_cr4() case on 486 sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock sctp: change to check peer prsctp_capable when using prsctp polices sctp: remove prsctp_param from sctp_chunk sctp: move sent_count to the memory hole in sctp_chunk tg3: Avoid NULL pointer dereference in tg3_io_error_detected() x86/init: Fix cr4_init_shadow() on CR4-less machines MIPS: Fix detection of unsupported highmem with cache aliases MIPS: Malta: Fix IOCU disable switch read for MIPS64 MIPS: Fix BUILD_ROLLBACK_PROLOGUE for microMIPS ...
2016-10-01drm/exynos: g2d: simplify g2d_free_runqueue_node()Tobias Jakobi1-3/+0
The function is never called with zero 'runqueue_node'. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-10-01drm/exynos: g2d: use autosuspend mode for PM runtimeTobias Jakobi1-2/+7
The runqueue worker currently issues a get() when a new node is processed, and a put() once a node is completed. The corresponding suspend and resume calls currently only do clock gating, but with the upcoming introduction of IOMMU runpm also the corresponding IOMMU domain gets enabled (for get()) and disabled (for put()). This introduces performance regressions with we mitigate here. Switch PM runtime to autosuspend, such that clock gating and IOMMU control only happens when the engine is idle for a 'long' time. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-10-01drm/exynos: g2d: wait for engine to finishTobias Jakobi1-7/+77
While the engine works on a runqueue node it does memory access to the buffers associated with that node. Make sure that the engine is idle when g2d_close() and/or g2d_remove() are called, i.e. buffer associated with the process (for g2d_close()), or all buffers (for g2d_remove()) can be safely be unmapped. We have to take into account that the engine might be in an undefined state, i.e. it hangs and doesn't become idle. In this case, we issue a hardware reset to return the hardware and the driver context into a proper state. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-10-01drm/exynos: g2d: remove runqueue nodes in g2d_{close,remove}()Tobias Jakobi1-15/+33
The driver might be closed (and/or removed) while there are still nodes queued for processing. Make sure to remove these nodes, which means all of them in the case of g2d_remove() and only those belonging to the corresponding process in g2d_close(). Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-10-01drm/exynos: g2d: move PM management to runqueue workerTobias Jakobi1-22/+56
Do all pm_runtime_{get,put}() calls in the runqueue worker. Also keep track of the engine's idle/busy state. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-10-01Revert "drm/exynos: g2d: fix system and runtime pm integration"Tobias Jakobi1-7/+22
This reverts commit b05984e21a7e000bf5074ace00d7a574944b2c16. The change, i.e. merging the sleep and runpm operations, produces a deadlock situation: (1) exynos_g2d_exec_ioctl() prepares a runqueue node and calls g2d_exec_runqueue() (2) g2d_exec_runqueue() calls g2d_dma_start() which gets runtime PM sync (3) runtime PM core calls g2d_runtime_resume() (4) g2d_runtime_resume() calls g2d_exec_runqueue(), which loops back to (2) Due to mutexes that are in place, a deadlock situation is created. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-10-01drm/exynos: use drm core to handle page-flip eventAndrzej Hajda8-78/+21
Exynos DRM framework handled page-flip event with custom code. The patch replaces it with drm-core vblank queue. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-10-01drm/exynos: mark exynos_dp_crtc_clock_enable() staticBaoyou Xie1-1/+1
We get 1 warning when building kernel with W=1: drivers/gpu/drm/exynos/exynos_dp.c:46:5: warning: no previous prototype for 'exynos_dp_crtc_clock_enable' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. So this patch marks it 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-10-01drm/exynos/fimd: add clock rate checkingAndrzej Hajda1-11/+28
In case of some platforms fimd clocks can be configured to very low values, as a result refresh rate can be very low and driver/drm-core will timeout waiting for vblanks, it will result in premature removal of framebuffers and will cause oopses. The patch adds atomic_check callback to fimd to prevent setting such modes. Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-10-01drm/exynos: fix pending update handlingAndrzej Hajda3-60/+2
Exynos DRM devices update their registers at vblank time. Exynos-DRM uses custom mechanism to wait for vblank. This mechanism is error prone - variables are not updated atomically. As a result in certain circumstances user space can try to free buffers which are still in use by hardware, in such cases IOMMU can throw OOPS. The patch instead of fixing the mechanism replaces it with drm core helper. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-10-01drm/exynos/vidi: use timer for vblanks instead of sleeping workerAndrzej Hajda1-46/+20
VIDI driver uses fake vblank handler to generate vblank events. It was implemented using worker which slept for vblank time, additionally it did not work if there were no page flips. The patch replaces it with timer, uses drm_crtc_vblank_(on|off) helpers to manage it and fixes behavior for non-page-flip cases. This change allows further improvements of vblank in exynos-drm framework. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-10-01drm/exynos: g2d: beautify probing messageTobias Jakobi1-1/+1
Apply some 'make-up' in g2d_probe(). Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-10-01drm/exynos: mixer: simplify loop in vp_win_reset()Tobias Jakobi1-2/+2
A simple while loop should do the same here. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-10-01drm/exynos: mixer: convert booleans to flags in mixer contextTobias Jakobi1-25/+30
The mixer context struct already has a 'flags' field, so we can use it to store the 'interlace', 'vp_enabled' and 'has_sclk' booleans. We use the non-atomic helper functions to access these bits. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-10-01gpu: drm: exynos_hdmi: Remove duplicate initialization of regulator bulk ↵Milo Kim1-3/+2
consumer The helper, devm_regulator_bulk_get() initializes the consumer as NULL, so this code can be ignored. Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-10-01gpu: drm: exynos_hdmi: Move PHY logic into single functionMilo Kim1-30/+33
Paring DT properties and getting PHY IO (memory mapped or I2C) in one function. Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-10-01gpu: drm: exynos_hdmi: Move DDC logic into single functionMilo Kim1-21/+25
Paring DT properties and getting the I2C adapter in one function. Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-09-28Merge tag 'v4.8-rc8' into drm-nextDave Airlie5-107/+18
Linux 4.8-rc8 There was a lot of fallout in the imx/amdgpu/i915 drivers, so backmerge it now to avoid troubles. * tag 'v4.8-rc8': (1442 commits) Linux 4.8-rc8 fault_in_multipages_readable() throws set-but-unused error mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing radix tree: fix sibling entry handling in radix_tree_descend() radix tree test suite: Test radix_tree_replace_slot() for multiorder entries fix memory leaks in tracing_buffers_splice_read() tracing: Move mutex to protect against resetting of seq data MIPS: Fix delay slot emulation count in debugfs MIPS: SMP: Fix possibility of deadlock when bringing CPUs online mm: delete unnecessary and unsafe init_tlb_ubc() huge tmpfs: fix Committed_AS leak shmem: fix tmpfs to handle the huge= option properly blk-mq: skip unmapped queues in blk_mq_alloc_request_hctx MIPS: Fix pre-r6 emulation FPU initialisation arm64: kgdb: handle read-only text / modules arm64: Call numa_store_cpu_info() earlier. locking/hung_task: Fix typo in CONFIG_DETECT_HUNG_TASK help text nvme-rdma: only clear queue flags after successful connect i2c: qup: skip qup_i2c_suspend if the device is already runtime suspended perf/core: Limit matching exclusive events to one PMU ...
2016-09-19Subject: [PATCH, RESEND] drm: exynos: avoid unused function warningArnd Bergmann1-4/+2
When CONFIG_PM is not set, we get a warning about an unused function: drivers/gpu/drm/exynos/exynos_drm_gsc.c:1219:12: error: 'gsc_clk_ctrl' defined but not used [-Werror=unused-function] static int gsc_clk_ctrl(struct gsc_context *ctx, bool enable) ^~~~~~~~~~~~ This removes the two #ifdef checks in this file and instead marks the functions as __maybe_unused, which is a more reliable way of doing the same, allowing better build coverage and avoiding the warning above. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-09-18drm/exynos: g2d: fix system and runtime pm integrationMarek Szyprowski1-22/+7
Move code from system sleep pm to runtime pm callbacks to ensure proper driver state preservation when device is under power domain. Then, use generic helpers for using runtime pm for system sleep pm. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-09-18drm/exynos: rotator: fix system and runtime pm integrationMarek Szyprowski1-24/+2
Use generic helpers instead of open-coding usage of runtime pm for system sleep pm, which was potentially broken for some corner cases. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-09-18drm/exynos: gsc: fix system and runtime pm integrationMarek Szyprowski1-27/+2
Use generic helpers instead of open-coding usage of runtime pm for system sleep pm, which was potentially broken for some corner cases. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-09-18drm/exynos: fimc: fix system and runtime pm integrationMarek Szyprowski1-27/+2
Use generic helpers instead of open-coding usage of runtime pm for system sleep pm, which was potentially broken for some corner cases. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-09-18exynos-drm: Fix unsupported GEM memory type error message to be clearShuah Khan1-3/+3
Fix unsupported GEM memory type error message to include the memory type information. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-09-16iommu/dma: Avoid PCI host bridge windowsRobin Murphy1-1/+1
With our DMA ops enabled for PCI devices, we should avoid allocating IOVAs which a host bridge might misinterpret as peer-to-peer DMA and lead to faults, corruption or other badness. To be safe, punch out holes for all of the relevant host bridge's windows when initialising a DMA domain for a PCI device. CC: Marek Szyprowski <m.szyprowski@samsung.com> CC: Inki Dae <inki.dae@samsung.com> Reported-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-08-29drm/atomic-helper: Add NO_DISABLE_AFTER_MODESET flag support for plane commitLiu Ying1-1/+1
Drivers may set the NO_DISABLE_AFTER_MODESET flag in the 'flags' parameter of the helper drm_atomic_helper_commit_planes() if the relevant display controllers(e.g., IPUv3 for imx-drm) require to disable a CRTC's planes when the CRTC is disabled. The helper would skip the ->atomic_disable call for a plane if the CRTC of the old plane state needs a modesetting operation. Of course, the drivers need to disable the planes in their CRTC disable callbacks since no one else would do that. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Russell King <linux@armlinux.org.uk> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Liu Ying <gnuiyl@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1472461923-14364-1-git-send-email-gnuiyl@gmail.com
2016-08-24[media] s5p-tv: remove obsolete driverHans Verkuil1-2/+1
The s5p-tv driver has been replaced by the exynos drm driver for quite a long time now. Remove this driver to avoid having duplicate drivers, of which this one is considered dead code by Samsung. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-08-07Merge tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds3-62/+13
Pull drm zpos property support from Dave Airlie: "This tree was waiting on some media stuff I hadn't had time to get a stable branchpoint off, so I just waited until it was all in your tree first. It's been around a bit on the list and shouldn't affect anything outside adding the generic API and moving some ARM drivers to using it" * tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linux: drm: rcar: use generic code for managing zpos plane property drm/exynos: use generic code for managing zpos plane property drm: sti: use generic zpos for plane drm: add generic zpos property
2016-08-04dma-mapping: use unsigned long for dma_attrsKrzysztof Kozlowski4-19/+17
The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29drm/exynos: use generic code for managing zpos plane propertyMarek Szyprowski3-62/+13
This patch replaces zpos property handling custom code in Exynos DRM driver with calls to generic DRM code. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Inki Dae <inki.dae@samsung.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: vincent.abriou@st.com Cc: fabien.dessenne@st.com Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2016-07-21GPU-DRM-Exynos: Delete an unnecessary check before the function call "vunmap"Markus Elfring1-2/+1
The vunmap() function performs also input parameter validation. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/a5a79711-10a3-e304-a897-892ebdf2ff9f@users.sourceforge.net
2016-07-19Merge remote-tracking branch 'airlied/drm-next' into topic/drm-miscDaniel Vetter10-69/+136
Backmerge drm-next to be able to apply Chris' connector_unregister_all cleanup (need latest i915 and sun4i state for that). Also there's a trivial conflict in ttm_bo.c that git rerere fails to remember. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-07-16Merge branch 'upstream/analogix-dp-20160705' of ↵Dave Airlie1-2/+2
git://github.com/yakir-Yang/linux into drm-next Please consider merging this tag, which contains the v4 misc fixes and add RK3399 eDP support patches[0] I sent on 2016-06-29, rebased onto v4.7-rc5. * 'upstream/analogix-dp-20160705' of git://github.com/yakir-Yang/linux: dt-bindings: analogix_dp: rockchip: correct the wrong compatible name drm/rockchip: analogix_dp: introduce the pclk for grf drm/bridge: analogix_dp: fix no drm hpd event when panel plug in drm/rockchip: analogix_dp: update the comments about why need to hardcode VOP output mode drm/rockchip: analogix_dp: correct the connector display color format and bpc drm/bridge: analogix_dp: passing the connector as an argument in .get_modes() drm/rockchip: analogix_dp: make panel detect to an optional action drm/rockchip: analogix_dp: add rk3399 eDP support drm/bridge: analogix_dp: some rockchip chips need to flip REF_CLK bit setting drm/bridge: analogix_dp: correct the register bit define error in ANALOGIX_DP_PLL_REG_1 drm/rockchip: analogix_dp: split the lcdc select setting into device data
2016-07-15gpu: drm: exynos_hdmi: add missing of_node_put after calling of_parse_phandlePeter Chen1-0/+2
of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2016-07-15Merge branch 'exynos-drm-next' of ↵Dave Airlie5-53/+126
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next This pull request adds to the rework patch series for IOMMU integration to support ARM64bit architecture with DMA-IOMMU glue code. With this patch series, Exynos DRM works well on Exynos5433 SoC with IOMMU enabled. * 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: iommu: add support for ARM64 specific code for IOMMU glue drm/exynos: iommu: move ARM specific code to exynos_drm_iommu.h drm/exynos: iommu: remove unused entries from exynos_drm_private strcuture drm/exynos: iommu: add a check if all sub-devices have iommu controller drm/exynos: iommu: move dma_params configuration code to separate functions
2016-07-15Merge tag 'topic/drm-misc-2016-07-14' of ↵Dave Airlie1-4/+0
git://anongit.freedesktop.org/drm-intel into drm-next I recovered dri-devel backlog from my vacation, more misc stuff: - of_put_node fixes from Peter Chen (not all yet) - more patches from Gustavo to use kms-native drm_crtc_vblank_* funcs - docs sphinxification from Lukas Wunner - bunch of fixes all over from Dan Carpenter - more follow up work from Chris register/unregister rework in various places - vgem dma-buf export (for writing testcases) - small things all over from tons of different people * tag 'topic/drm-misc-2016-07-14' of git://anongit.freedesktop.org/drm-intel: (52 commits) drm: Don't overwrite user ioctl arg unless requested dma-buf/sync_file: improve Kconfig description for Sync Files MAINTAINERS: add entry for the Sync File Framework drm: Resurrect atomic rmfb code drm/vgem: Use PAGE_KERNEL in place of x86-specific PAGE_KERNEL_IO qxl: silence uninitialized variable warning qxl: check for kmap failures vga_switcheroo: Sphinxify docs drm: Restore double clflush on the last partial cacheline gpu: drm: rockchip_drm_drv: add missing of_node_put after calling of_parse_phandle gpu: drm: sti_vtg: add missing of_node_put after calling of_parse_phandle gpu: drm: sti_hqvdp: add missing of_node_put after calling of_parse_phandle gpu: drm: sti_vdo: add missing of_node_put after calling of_parse_phandle gpu: drm: sti_compositor: add missing of_node_put after calling of_parse_phandle drm/tilcdc: use drm_crtc_handle_vblank() drm/rcar-du: use drm_crtc_handle_vblank() drm/nouveau: use drm_crtc_handle_vblank() drm/atmel: use drm_crtc_handle_vblank() drm/armada: use drm_crtc_handle_vblank() drm: make drm_vblank_count_and_time() static ...
2016-07-13drm/exynos: iommu: add support for ARM64 specific code for IOMMU glueMarek Szyprowski3-7/+57
This patch adds support for ARM 64bit architecture with IOMMU-DMA glue code, so Exynos DRM can be now used on Exynos 5433 with IOMMU enabled. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-07-13drm/exynos: iommu: move ARM specific code to exynos_drm_iommu.hMarek Szyprowski2-33/+42
This patch moves all ARM 32bit DMA-mapping/IOMMU dependant code from exynos_drm_iommu.c to .h, to let it compile conditionally and prepare for adding support for other architectures/IOMMU glue code (like ARM 64bit with IOMMU-DMA glue). Later, when ARM 32bit and 64bit will be unified, this code can be removed. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-07-13drm/exynos: iommu: remove unused entries from exynos_drm_private strcutureMarek Szyprowski2-9/+2
This patch removes unused entries from exynos_drm_private strcuture. da_start/da_space_size were only used in drm_create_iommu_mapping() function and never set to other value than the defaults. Instead use default values directly in arm_iommu_create_mapping() call. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-07-13drm/exynos: iommu: add a check if all sub-devices have iommu controllerMarek Szyprowski1-0/+5
This patch adds a check if all devices belonging to Exynos DRM have the same dma_map_ops set. This is required to enable operation with IOMMU enabled. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-07-13drm/exynos: iommu: move dma_params configuration code to separate functionsMarek Szyprowski1-6/+22
Move code for managing DMA max segment size parameter to separate functions. This patch also replaces devm_kzalloc() with kzalloc() and adds proper kfree call. devm_kzalloc() cannot be used for dma_params structure, because it will be freed on driver remove not on device release. This means in case of Exynos DRM being compiled as module and loaded 2 times, a user-after-free issue will happen. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-07-12drm/exynos: make fbdev support really optionalTobias Jakobi1-4/+0
Currently enabling Exynos DRM support automatically pulls in lots of fbdev dependencies. However these deps are unnecessary since DRM core already enables them when needed. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1466769168-31602-1-git-send-email-tjakobi@math.uni-bielefeld.de
2016-07-05drm/bridge: analogix_dp: passing the connector as an argument in .get_modes()Yakir Yang1-2/+2
It's better to pass the connector to platform driver in .get_modes() callback, just like what the .get_modes() helper function designed. Signed-off-by: Yakir Yang <ykk@rock-chips.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Tomasz Figa <tomasz.figa@chromium.com>