summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/drm_probe_helper.c
AgeCommit message (Collapse)AuthorFilesLines
2016-12-18drm: Convert all helpers to drm_connector_list_iterDaniel Vetter1-6/+12
Mostly nothing special (except making sure that really all error paths and friends call iter_put). v2: Don't forget the raw connector_list walking in drm_helper_move_panel_connectors_to_head. That one unfortunately can't be converted to the iterator helpers, but since it's just some list splicing best to just wrap the entire thing up in one critical section. v3: Bail out after iter_put (Harry). Cc: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161215155843.13408-1-daniel.vetter@ffwll.ch
2016-12-06drm: Don't block the kworker waiting for mode_config.mutex in output_poll()Chris Wilson1-1/+5
If we cannot acquire the mode_config.mutex immediately, just back off and queue a new attempt after the poll interval. This is mostly to stop the hung task spam when the system is deadlocked, but it will also lessen the load (in such extreme cases). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> [danvet:s/lock/mutex/ per Eric's comment.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161206113715.30382-1-chris@chris-wilson.co.uk
2016-12-01drm: Make the connector .detect() callback optionalLaurent Pinchart1-3/+11
Many drivers (21 to be exact) create connectors that are always connected (for instance to an LVDS or DSI panel). Instead of forcing them to implement a dummy .detect() handler, make the callback optional and consider the connector as always connected in that case. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Jyri Sarha <jsarha@ti.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Vincent Abriou <vincent.abriou@st.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> [seanpaul fixed small conflict in rcar-du/rcar_du_lvdscon.c] Signed-off-by: Sean Paul <seanpaul@chromium.org>
2016-08-31drm: drm_probe_helper: Fix output_poll_work schedulingPeter Ujfalusi1-1/+7
drm_kms_helper_poll_enable_locked() should check if we have delayed event pending and if we have, schedule the work to run without delay. Currently the output_poll_work is only scheduled if any of the connectors have DRM_CONNECTOR_POLL_CONNECT or DRM_CONNECTOR_POLL_DISCONNECT with DRM_OUTPUT_POLL_PERIOD delay. It does not matter if we have delayed event already registered to be handled. The detection will be delayd by DRM_OUTPUT_POLL_PERIOD in any case. Furthermore if none of the connectors are marked as POLL_CONNECT or POLL_DISCONNECT because all connectors are either POLL_HPD or they are always connected: the output_poll_work will not run at all even if we have delayed event marked. When none of the connectors require polling, their initial status change from unknown to connected/disconnected is not going to be handled until the first kms application starts or if we have fb console enabled. Note that in general the output poll work should be enabled already when this happens, but at driver load usually the first probe happens before the output polling is enabled. This patch fixes this case. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> [danvet: Note when exactly this is an issue, since the probe code schedules the poll work itself already.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20160831110905.31289-1-peter.ujfalusi@ti.com
2016-06-02drm: Only create a cmdline mode if no probed modes matchChris Wilson1-2/+19
The intention of using video=<connector>:<mode> is primarily to select the user's preferred resolution at startup. Currently we always create a new mode irrespective of whether the monitor has a native mode at the desired resolution. This has the issue that we may then select the fake mode rather the native mode during fb_helper->inital_config() and so if the fake mode is invalid we then end up with a loss of signal. Oops. This invalid fake mode would also be exported to userspace, who potentially may make the same mistake. To avoid this issue, we filter out the added command line mode if we detect the desired resolution (and clock if specified) amongst the probed modes. This fixes the immediate problem of adding a duplicate mode, but perhaps more generically we should avoid adding a GTF mode if the monitor has an EDID that is not GTF-compatible, or similarly for CVT. Was meant to fix a regression from commit eaf99c749d43ae74ac7ffece5512f3c73f01dfd2 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 6 10:08:32 2014 +0200 drm: Perform cmdline mode parsing during connector initialisation but Radek explained that the original bug is no longer reproducible on latest kernels. v2: Explicitly delete our earlier cmdline mode v3: Mode pruning should now be sufficient to delete stale cmdline modes v4: Compute the vrefresh for the probed mode Reported-by: Radek Dostál <rd@radekdostal.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Radek Dostál <rd@radekdostal.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: Julia Lemire <jlemire@matrox.com> Cc: Dave Airlie <airlied@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [danvet: Drop cc: stable since no longer a pressing bugfix, just nice-to-have.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1464774651-20376-1-git-send-email-chris@chris-wilson.co.uk
2016-04-20drm: probe_helper: Hide ugly ifdefEzequiel Garcia1-2/+0
Push the ifdef to the drm_edid.h and create a stub, for the DRM_LOAD_EDID_FIRMWARE=n case. This removes some clutter in the code, making it more readable. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1461087638-16959-1-git-send-email-ezequiel@vanguardiasur.com.ar
2015-12-11drm: Expand the drm_helper_probe_single_connector_modes() docsVille Syrjälä1-12/+37
Describe the procedure that drm_helper_probe_single_connector_modes() uses to do it's work in the kernel-doc comment. Caveat: Looks like crap and trying to reverse engineer the documentation tools is not something I want to do. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449782037-19722-3-git-send-email-ville.syrjala@linux.intel.com
2015-12-11drm: Allow override_edid to override the firmware EDIDVille Syrjälä1-9/+8
IMO the override_edid should override any default EDID for the connector, whether that came in via the connector helper ->get_modes() vfunc or via the firmware EDID mechanism. Cc: Thomas Wood <thomas.wood@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449782037-19722-2-git-send-email-ville.syrjala@linux.intel.com
2015-12-11drm: Drop drm_helper_probe_single_connector_modes_nomerge()Ville Syrjälä1-60/+34
Now that the mode type bit merge logic is fixed to only merge between new probed modes, hopefully we can eliminat the special case for qxl and virtio. That is make the merge the mode type bits from all matching new probed modes, just like every other driver. qxl and virtio got excluded from the merging in commit 3fbd6439e463 ("drm: copy mode type in drm_mode_connector_list_update()") commit abce1ec9b08a ("Revert "drm: copy mode type in drm_mode_connector_list_update()"") commit b87577b7c768 ("drm: try harder to avoid regression when merging mode bits") Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Adam Jackson <ajax@redhat.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [danvet: Resolve conflicts with doc updates.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-11drm: Rename MODE_UNVERIFIED to MODE_STALEVille Syrjälä1-2/+2
MODE_UNVERIFIED actually means that the mode came from a previous probe, and if the new probe doesn't produce a matching mode it will get pruned from the list. Rename the flag to MODE_STALE to better convey the meaning. v2: Rebased due to conflicts with Daniel's doc stuff Cc: Adam Jackson <ajax@redhat.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449779948-10906-1-git-send-email-ville.syrjala@linux.intel.com
2015-12-11drm: Don't overwrite UNVERFIED mode status to OKVille Syrjälä1-1/+2
The way the mode probing works is this: 1. All modes currently on the mode list are marked as UNVERIFIED 2. New modes are on the probed_modes list (they start with status OK) 3. Modes are moved from the probed_modes list to the actual mode list. If a mode already on the mode list is deemed to match one of the probed modes, the duplicate is dropped and the mode status updated to OK. After this the probed_modes list will be empty. 4. All modes on the mode list are verified to not violate any constraints. Any that do are marked as such. 5. Any mode left with a non-OK status is pruned from the list, with an appropriate debug message. What all this means is that any mode on the original list that didn't have a duplicate on the probed_modes list, should be left with status UNVERFIED (or previously could have been left with some other status, but never OK). I broke that in commit 05acaec334fc ("drm: Reorganize probed mode validation") by always assigning something to the mode->status during the validation step. So any mode from the old list that still passed the validation would be left on the list with status OK in the end. Fix this by not doing the basic mode validation unless the mode already has status OK (meaning it came from the probed_modes list, or at least a duplicate of it was on that list). This way we will correctly prune away any mode from the old mode list that didn't appear on the probed_modes list. Cc: stable@vger.kernel.org Cc: Adam Jackson <ajax@redhat.com> Fixes: 05acaec334fc ("drm: Reorganize probed mode validation") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449177255-9515-2-git-send-email-ville.syrjala@linux.intel.com Testcase: igt/kms_force_connector_basic/prune-stale-modes Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93332 [danvet: Also applying to drm-misc to avoid too much conflict hell - there's a big pile of patches from Ville on top of this one.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-08drm: Merge helper docbook into kerneldoc commentsDaniel Vetter1-7/+23
Duplication is bad, luckily both help texts highlighted different issues so the kerneldoc gained quite a bit! While at it also sprinkle more references to the vtable structs around and make it clear that legacy CRTC helpers are deprecated and which functions to use instead. v2: Spelling fixes and polish (Thierry). Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449218769-16577-6-git-send-email-daniel.vetter@ffwll.ch Reviewed-by: Thierry Reding <treding@nvidia.com>
2015-12-08drm: Reorganize helper vtables and their docsDaniel Vetter1-0/+3
Currently we have 4 helper libraries (probe, crtc, plane & atomic) that all use the same helper vtables. And that's by necessity since we don't want to litter the core structs with one ops pointer per helper library. Also often the reuse the same hooks (like atomic does, to facilite conversion from existing drivers using crtc and plane helpers). Given all that it doesn't make sense to put the docs for these next to specific helpers. Instead extract them into a new header file and section in the docbook, and add references to them everywhere. Unfortunately kernel-doc complains when an include directive doesn't find anything (and it does by dumping crap into the output file). We have to remove the now empty includes to avoid that, instead of leaving them in for future proofing. v2: More OCD in ordering functions. v3: Spelling plus collate copyright headers properly. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449218769-16577-4-git-send-email-daniel.vetter@ffwll.ch Reviewed-by: Thierry Reding <treding@nvidia.com>
2015-12-04drm: keep connector status change logging human readableJani Nikula1-2/+3
We've had human readable connector status change debug logging since commit ed7951dc13aad4a14695ec8122e9f0e2ef25d39e Author: Lespiau, Damien <damien.lespiau@intel.com> Date: Fri May 10 12:36:42 2013 +0000 drm: Make the HPD status updates debug logs more readable but commit 162b6a57ac50eec236530a16c071ffa50e87362a Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Jan 21 08:45:21 2015 +0100 drm/probe-helper: don't lose hotplug event added a new one with just the numbers. Fix it. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449144003-2877-1-git-send-email-jani.nikula@intel.com
2015-11-24drm/sysfs: Send out uevent when connector->force changesDaniel Vetter1-23/+23
To avoid even more code duplication punt this all to the probe worker, which needs some slight adjustment to also generate a uevent when the status has changed to due connector->force. v2: Instead of running the output_poll_work (which is kinda the wrong thing and a layering violation since it's an internal of the probe helpers), or calling ->detect (which is again a layering violation since it's used only by probe helpers) just call the official ->fill_modes function, like a GET_CONNECTOR ioctl call. v3: Restore the accidentally removed forced-probe for echo "detect" > force. Cc: Chris Wilson <chris@chris-wilson.co.uk> Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1447951610-12622-22-git-send-email-daniel.vetter@ffwll.ch Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm: Add a non-locking version of drm_kms_helper_poll_enable(), v2Egbert Eich1-3/+16
drm_kms_helper_poll_enable() was converted to lock the mode_config mutex in commit 8c4ccc4ab6f64e859d4ff8d7c02c2ed2e956e07f ("drm/probe-helper: Grab mode_config.mutex in poll_init/enable"). This disregarded the cases where this function is called from a context where this mutex is already locked. Add a non-locking version as well. Changes since v1: - use function name suffix '_locked' for the function that is to be called from a locked context. Signed-off-by: Egbert Eich <eich@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-07-22drm/probe-helper: Grab mode_config.mutex in poll_init/enableDaniel Vetter1-16/+25
So on first looks this seems superflous since drivers should ensure correct ordering to not make this a problem. Otoh ordering constraints between hdp, fbdev load and enabling polling are already tricky on some hardware and it helps to be more robust. But the real goal is to just shut up a locking WARN_ON I'd like to add, which means init code gets some additional locks just for uniformity. v2: Also grab the lock for the public poll_enable, not just poll_init which is used for resume, with the same justification. Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-07-22drm: Add modeset object iteratorsDaniel Vetter1-3/+3
And roll them out across drm_* files. The point here isn't code prettification (it helps with that too) but that some of these lists aren't static any more. And having macros will gives us a convenient place to put locking checks into. I didn't add an iterator for props since that's only used by a list_for_each_entry_safe in the driver teardown code. Search&replace was done with the below cocci spatch. Note that there's a bunch more places that didn't match and which would need some manual changes, but I've intentially left these out for this mostly automated patch. iterator name drm_for_each_crtc; struct drm_crtc *crtc; struct drm_device *dev; expression head; @@ - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + drm_for_each_crtc (crtc, dev) { ... } @@ iterator name drm_for_each_encoder; struct drm_encoder *encoder; struct drm_device *dev; expression head; @@ - list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + drm_for_each_encoder (encoder, dev) { ... } @@ iterator name drm_for_each_fb; struct drm_framebuffer *fb; struct drm_device *dev; expression head; @@ - list_for_each_entry(fb, &dev->mode_config.fb_list, head) { + drm_for_each_fb (fb, dev) { ... } @@ iterator name drm_for_each_connector; struct drm_connector *connector; struct drm_device *dev; expression head; @@ - list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + drm_for_each_connector (connector, dev) { ... } Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-05-07Merge tag 'topic/drm-misc-2015-05-06' of ↵Dave Airlie1-2/+2
git://anongit.freedesktop.org/drm-intel into drm-next misc drm core patches. * tag 'topic/drm-misc-2015-05-06' of git://anongit.freedesktop.org/drm-intel: drm: simplify master cleanup drm: simplify authentication management drm: drop unused 'magicfree' list drm: fix a memleak on mutex failure path drm/atomic-helper: Really recover pre-atomic plane/cursor behavior drm/qxl: Fix qxl_noop_get_vblank_counter() drm: Zero out invalid vblank timestamp in drm_update_vblank_count. (v2) drm: Prevent invalid use of vblank_disable_immediate. (v2) drm/vblank: Fixup and document timestamp update/read barriers DRM: Don't re-poll connector for disconnect drm: Fix for DP CTS test 4.2.2.5 - I2C DEFER handling drm: Fix the 'native defer' message in drm_dp_i2c_do_msg() drm/atomic-helper: Don't call atomic_update_plane when it stays off
2015-04-20DRM: Don't re-poll connector for disconnectJosef Holzmayr1-2/+2
DRM probe should not repoll a connector if it is already connected and the DRM_CONNECTOR_POLL_DISCONNECT flag is not set. Signed-off-by: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-16Merge tag 'topic/drm-misc-2015-04-15' of ↵Dave Airlie1-1/+1
git://anongit.freedesktop.org/drm-intel into drm-next One more drm-misch pull for 4.1 with mostly simple stuff and boring refactoring. Even the cursor fix from Matt is just to make a really anal igt happy. * tag 'topic/drm-misc-2015-04-15' of git://anongit.freedesktop.org/drm-intel: drm: fix trivial typo mistake drm: Make integer overflow checking cover universal cursor updates (v2) drm: make crtc/encoder/connector/plane helper_private a const pointer drm/armada: constify struct drm_encoder_helper_funcs pointer drm/radeon: constify more struct drm_*_helper funcs pointers drm/edid: add #defines for ELD versions drm/atomic: Add for_each_{connector,crtc,plane}_in_state helper macros drm: Use kref_put_mutex in drm_gem_object_unreference_unlocked drm/drm: constify all struct drm_*_helper funcs pointers drm/qxl: constify all struct drm_*_helper funcs pointers drm/nouveau: constify all struct drm_*_helper funcs pointers drm/radeon: constify all struct drm_*_helper funcs pointers drm/gma500: constify all struct drm_*_helper funcs pointers drm/mgag200: constify all struct drm_*_helper funcs pointers drm/exynos: constify all struct drm_*_helper funcs pointers drm: Fix some typos
2015-04-07drm/drm: constify all struct drm_*_helper funcs pointersJani Nikula1-1/+1
They are not to be modified. Generated using the semantic patch: @@ @@ ( const struct drm_crtc_helper_funcs * | - struct drm_crtc_helper_funcs * + const struct drm_crtc_helper_funcs * ) @@ @@ ( const struct drm_encoder_helper_funcs * | - struct drm_encoder_helper_funcs * + const struct drm_encoder_helper_funcs * ) @@ @@ ( const struct drm_connector_helper_funcs * | - struct drm_connector_helper_funcs * + const struct drm_connector_helper_funcs * ) @@ @@ ( const struct drm_plane_helper_funcs * | - struct drm_plane_helper_funcs * + const struct drm_plane_helper_funcs * ) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-27drm/edid: set ELD for firmware and debugfs override EDIDsJani Nikula1-0/+1
If the user supplies EDID through firmware or debugfs override, the driver callbacks are bypassed and the connector ELD does not get updated, and audio fails. Set ELD for firmware and debugfs EDIDs too. There should be no harm in gratuitously doing this for non HDMI/DP connectors, as it's still up to the driver to use the ELD, if any. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82349 Reference: https://bugs.freedesktop.org/show_bug.cgi?id=80691 Reported-by: Emil <emilsvennesson@gmail.com> Reported-by: Rob Engle <grenoble@gmail.com> Tested-by: Jolan Luff <jolan@gormsby.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-01-22drm/probe-helper: clamp unknown connector status in the poll workDaniel Vetter1-0/+18
On some chipset we try to avoid possibly invasive output detection methods (like load detect which can cause flickering elsewhere) in the output poll work. Drivers could hence return unknown when a previous full ->detect call returned a different state. This change will generate a hotplug event, forcing userspace to do a full scan. This in turn updates the connector->status field so that we will _again_ get a state change when the hotplug work re-runs in 10 seconds. To avoid this ping-pong loop detect this situation and clamp the connector state to the old value. Patch is inspired by a patch from Knut Peterson. Knut's patch completely ignored connector state changes if either the old or new status was unknown, which seemed to be a bit too agressive to me. v2: Rebased onto the drm_probe_helper.c extraction. References: http://lists.freedesktop.org/archives/dri-devel/2012-August/025975.html Cc: Knut Petersen <Knut_Petersen@t-online.de> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Alex Deucher <alexander.deucher@amd.com> Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-22drm/probe-helper: don't lose hotplug eventDaniel Vetter1-2/+34
There's a race window (small for hpd, 10s large for polled outputs) where userspace could sneak in with an unrelated connnector probe ioctl call and eat the hotplug event (since neither the hpd nor the poll code see a state change). To avoid this, check whether the connector state changes in all other ->detect calls (in the current helper code that's only probe_single) and if that's the case, fire off a hotplug event. Note that we can't directly call the hotplug event handler, since that expects that no locks are held (due to reentrancy with the fb code to update the kms console). Also, this requires that drivers using the probe_single helper function set up the poll work. All current drivers do that already, and with the reworked hpd handling there'll be no downside to unconditionally setting up the poll work any more. v2: Review from Rob Clark - Don't bail out of the output poll work immediately if it's disabled to make sure we deliver the delayed hoptplug events. Instead just jump to the tail. - Don't scheduel the work when it's not set up. Would be a driver bug since using probe helpers for anything dynamic without them initialized makes them all noops. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Tested-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-17drm: Perform basic sanity checks on probed modesVille Syrjälä1-1/+4
Make sure the timings of probed modes at least pass some very basic sanity checks. The checks include: - clock,hdisplay,vdisplay are non zero - sync pulse fits within the blanking period - htotal,vtotal are big enough I have not checked all the drivers to see if the modes the generate might violate these constraints. I'm hoping not, because that would mean either abandoning the idea of doing this from the core code, or fixing the drivers. I'm not entirely sure about limiting the sync pulse to the blanking period. Intel hardware doesn't support such things, but some other hardware might. However at least HDMI doesn't allow having sync pulse edges within the active period, so I'm thinking the check is probably OK to have in the common code. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-17drm: Reorganize probed mode validationVille Syrjälä1-22/+18
Make drm_mode_validate_size() and drm_mode_validate_flag() deal with a single mode instead of having each iterate through the mode list. The hope is that in the future we might be able to share various mode validation functions between modeset and get_modes. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04drm: Fix DRM_FORCE_ON_DIGITAL usePeter Hurley1-1/+2
A connector may be forced on from the command line via video= command line setting. The digital output of dual-mode connectors can also be specifically selected and forced on; eg., 'video=DVI-I-2:D'. However, in this case, the connector->status will be mistakenly set to connector_status_disconnected, and the connector will not be mode set. Fix the connector->status when connector->force is DRM_FORCE_ON_DIGITAL. Note that this seems to have been broken ever since the introduction of the connector forcing support in commit d50ba256b5f1478e15accfcfda9b72fd7a661364 Author: Dave Airlie <airlied@linux.ie> Date: Wed Sep 23 14:44:08 2009 +1000 drm/kms: start adding command line interface using fb. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> [danvet: Add note about that this never worked.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-08-06drm: Perform cmdline mode parsing during connector initialisationChris Wilson1-0/+17
i915.ko has a custom fbdev initialisation routine that aims to preserve the current mode set by the BIOS, unless overruled by the user. The user's wishes are determined by what, if any, mode is specified on the command line (via the video= parameter). However, that command line mode is first parsed by drm_fb_helper_initial_config() which is called after i915.ko's custom initial_config() as a fallback method. So in order for us to honour it, we need to move the cmdline parser earlier. If we perform the connector cmdline parsing as soon as we initialise the connector, that cmdline mode and forced status is then available even if the fbdev helper is not compiled in or never called. We also then expose the cmdline user mode in the connector mode lists. v2: Rebase after connector->name upheaval. v3: Adapt mga200 to look for the cmdline mode in the new place. Nicely simplifies things while at that. v4: Fix checkpatch. v5: Select FB_CMDLINE to adapt to the changed fbdev patch. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73154 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v2) Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v2) Cc: dri-devel@lists.freedesktop.org Cc: Julia Lemire <jlemire@matrox.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-19drm/debugfs: add an "edid_override" file per connectorThomas Wood1-1/+8
Add a file to debugfs for each connector to allow the EDID to be overridden. v2: Copy ubuf before accessing it and reject invalid length data. (David Herrmann) Ensure override_edid is reset when a new EDID value is written. (David Herrmann) Fix the debugfs file permissions. (David Herrmann) Signed-off-by: Thomas Wood <thomas.wood@intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-04drm: replace drm_get_connector_name() with direct name field useJani Nikula1-5/+5
Generated using semantic patch: @@ expression E; @@ - drm_get_connector_name(E) + E->name [airlied: regenerated] Acked-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-16Merge tag 'topic/core-stuff-2014-05-05' of ↵Dave Airlie1-1/+1
git://anongit.freedesktop.org/drm-intel into drm-next Update pull request with drm core patches. Mostly some polish for the primary plane stuff and a pile of patches all over from Thierry. Has survived a few days in drm-intel-nightly without causing ill. I've frobbed my scripts a bit to also tag my topic branches so that you have something stable to pull - I've accidentally pushed a bunch more patches onto this branch before you've taken the old pull request. * tag 'topic/core-stuff-2014-05-05' of git://anongit.freedesktop.org/drm-intel: drm: Make drm_crtc_helper_disable() return void drm: Fix indentation of closing brace drm/dp: Fix typo in comment drm: Fixup flip-work kerneldoc drm/fb: Fix typos drm/edid: Cleanup kerneldoc drm/edid: Drop revision argument for drm_mode_std() drm: Try to acquire modeset lock on panic or sysrq drm: remove unused argument from drm_open_helper drm: Handle ->disable_plane failures correctly drm: Simplify fb refcounting rules around ->update_plane drm/crtc-helper: gc usless connector loop in disable_unused_functions drm/plane_helper: don't disable plane in destroy function drm/plane-helper: Fix primary plane scaling check drm: make mode_valid callback optional drm/edid: Fill PAR in AVI infoframe based on CEA mode list
2014-05-01drm: try harder to avoid regression when merging mode bitsDave Airlie1-21/+43
For QXL hw we really want the bits to be replaced as we change the preferred mode on the fly, and the same goes for virgl when I get to it, however the original fix for this seems to have caused a wierd regression on Intel G33 that in a stunning display of failure at opposition to his normal self, Daniel failed to diagnose. So we are left doing this, ugly ugly ugly ugly, Daniel you fixed that G33 yet?, ugly, ugly. Tested-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-04-22drm: make mode_valid callback optionalAndrzej Hajda1-1/+1
Many drm connectors do not need mode validation. The patch makes this callback optional and removes dumb implementations. v2: Rebase: - imx move to a shared (but still dummy) ->mode_valid implementation. - probe helpers have been extracted to drm_probe_helper.c Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> (v1) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-18drm: Split out drm_probe_helper.c from drm_crtc_helper.cDaniel Vetter1-0/+426
This is leftover stuff from my previous doc round which I kinda wanted to do but didn't yet due to rebase hell. The modeset helpers and the probing helpers a independent and e.g. i915 uses the probing stuff but has its own modeset infrastructure. It hence makes to split this up. While at it add a DOC: comment for the probing libraray. It would be rather neat to pull some of the DocBook documenting these two helpers into in-line DOC: comments. But unfortunately kerneldoc doesn't support markdown or something similar to make nice-looking documentation, so the current state is better. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 05:29:10 +0000