summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/drm_dp_mst_topology.c
AgeCommit message (Collapse)AuthorFilesLines
2021-06-16drm/dp_mst: Add missing drm parameters to recently added call to drm_dbg_kms()José Roberto de Souza1-2/+5
Commit 3769e4c0af5b ("drm/dp_mst: Avoid to mess up payload table by ports in stale topology") added to calls to drm_dbg_kms() but it missed the first parameter, the drm device breaking the build. Fixes: 3769e4c0af5b ("drm/dp_mst: Avoid to mess up payload table by ports in stale topology") Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Lyude Paul <lyude@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: stable@vger.kernel.org Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210616194415.36926-1-jose.souza@intel.com
2021-06-16drm/dp_mst: Avoid to mess up payload table by ports in stale topologyWayne Lin1-0/+29
[Why] After unplug/hotplug hub from the system, userspace might start to clear stale payloads gradually. If we call drm_dp_mst_deallocate_vcpi() to release stale VCPI of those ports which are not relating to current topology, we have chane to wrongly clear active payload table entry for current topology. E.g. We have allocated VCPI 1 in current payload table and we call drm_dp_mst_deallocate_vcpi() to clean VCPI 1 in stale topology. In drm_dp_mst_deallocate_vcpi(), it will call drm_dp_mst_put_payload_id() tp put VCPI 1 and which means ID 1 is available again. Thereafter, if we want to allocate a new payload stream, it will find ID 1 is available by drm_dp_mst_assign_payload_id(). However, ID 1 is being used [How] Check target sink is relating to current topology or not before doing any payload table update. Searching upward to find the target sink's relevant root branch device. If the found root branch device is not the same root of current topology, don't update payload table. Changes since v1: * Change debug macro to use drm_dbg_kms() instead * Amend the commit message to add Cc tag. Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210616035501.3776-3-Wayne.Lin@amd.com Reviewed-by: Lyude Paul <lyude@redhat.com>
2021-06-16drm/dp_mst: Do not set proposed vcpi directlyWayne Lin1-26/+10
[Why] When we receive CSN message to notify one port is disconnected, we will implicitly set its corresponding num_slots to 0. Later on, we will eventually call drm_dp_update_payload_part1() to arrange down streams. In drm_dp_update_payload_part1(), we iterate over all proposed_vcpis[] to do the update. Not specific to a target sink only. For example, if we light up 2 monitors, Monitor_A and Monitor_B, and then we unplug Monitor_B. Later on, when we call drm_dp_update_payload_part1() to try to update payload for Monitor_A, we'll also implicitly clean payload for Monitor_B at the same time. And finally, when we try to call drm_dp_update_payload_part1() to clean payload for Monitor_B, we will do nothing at this time since payload for Monitor_B has been cleaned up previously. For StarTech 1to3 DP hub, it seems like if we didn't update DPCD payload ID table then polling for "ACT Handled"(BIT_1 of DPCD 002C0h) will fail and this polling will last for 3 seconds. Therefore, guess the best way is we don't set the proposed_vcpi[] diretly. Let user of these herlper functions to set the proposed_vcpi directly. [How] 1. Revert commit 7617e9621bf2 ("drm/dp_mst: clear time slots for ports invalid") 2. Tackle the issue in previous commit by skipping those trasient proposed VCPIs. These stale VCPIs shoulde be explicitly cleared by user later on. Changes since v1: * Change debug macro to use drm_dbg_kms() instead * Amend the commit message to add Fixed & Cc tags Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Fixes: 7617e9621bf2 ("drm/dp_mst: clear time slots for ports invalid") Cc: Lyude Paul <lyude@redhat.com> Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.5+ Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210616035501.3776-2-Wayne.Lin@amd.com Reviewed-by: Lyude Paul <lyude@redhat.com>
2021-05-27drm/dp_mst: Use kHz as link rate units when settig source max link caps at initNikola Cornij1-4/+4
[why] Link rate in kHz is what is eventually required to calculate the link bandwidth, which makes kHz a more generic unit. This should also make forward-compatibility with new DP standards easier. [how] - Replace 'link rate DPCD code' with 'link rate in kHz' when used with drm_dp_mst_topology_mgr_init() - Add/remove related DPCD code conversion from/to kHz where applicable Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210512210011.8425-2-nikola.cornij@amd.com
2021-04-29drm/dp_mst: Use Extended Base Receiver Capability DPCD spaceNikola Cornij1-12/+21
[why] DP 1.4a spec mandates that if DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT is set, Extended Base Receiver Capability DPCD space must be used. Without doing that, the three DPCD values that differ will be wrong, leading to incorrect or limited functionality. MST link rate, for example, could have a lower value. Also, Synaptics quirk wouldn't work out well when Extended DPCD was not read, resulting in no DSC for such hubs. [how] Modify MST topology manager to use the values from Extended DPCD where applicable. To prevent regression on the sources that have a lower maximum link rate capability than MAX_LINK_RATE from Extended DPCD, have the drivers supply maximum lane count and rate at initialization time. This also reverts commit 2dcab875e763 ("Revert drm/dp_mst: Retrieve extended DPCD caps for topology manager"), brining the change back to the original commit ad44c03208e4 ("drm/dp_mst: Retrieve extended DPCD caps for topology manager"). Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210429221151.22020-2-nikola.cornij@amd.com
2021-04-27drm/dp_mst: Convert drm_dp_mst_topology.c to drm_err()/drm_dbg*()Lyude Paul1-181/+187
And finally, convert all of the code in drm_dp_mst_topology.c over to using drm_err() and drm_dbg*(). Note that this refactor would have been a lot more complicated to have tried writing a coccinelle script for, so this whole thing was done by hand. v2: * Fix line-wrapping in drm_dp_mst_atomic_check_mstb_bw_limit() Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Robert Foss <robert.foss@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-18-lyude@redhat.com Reviewed-by: Dave Airlie <airlied@redhat.com>
2021-04-27drm/dp_mst: Pass drm_dp_mst_topology_mgr to drm_dp_get_vc_payload_bw()Lyude Paul1-2/+5
Since this is one of the few functions in drm_dp_mst_topology.c that doesn't have any way of getting access to a drm_device, let's pass the drm_dp_mst_topology_mgr down to this function so that it can use drm_dbg_kms(). Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-14-lyude@redhat.com Reviewed-by: Dave Airlie <airlied@redhat.com>
2021-04-27drm/dp: Add backpointer to drm_device in drm_dp_auxLyude Paul1-0/+1
This is something that we've wanted for a while now: the ability to actually look up the respective drm_device for a given drm_dp_aux struct. This will also allow us to transition over to using the drm_dbg_*() helpers for debug message printing, as we'll finally have a drm_device to reference for doing so. Note that there is one limitation with this - because some DP AUX adapters exist as platform devices which are initialized independently of their respective DRM devices, one cannot rely on drm_dp_aux->drm_dev to always be non-NULL until drm_dp_aux_register() has been called. We make sure to point this out in the documentation for struct drm_dp_aux. v3: * Add WARN_ON_ONCE() to drm_dp_aux_register() if drm_dev isn't filled out Signed-off-by: Lyude Paul <lyude@redhat.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-4-lyude@redhat.com Reviewed-by: Dave Airlie <airlied@redhat.com>
2021-04-08drm/dp_mst: Drop DRM_ERROR() on kzalloc() fail in drm_dp_mst_handle_up_req()Lyude Paul1-3/+2
Checkpatch was complaining about this - there's no need for us to print errors when kzalloc() fails, as kzalloc() will already WARN for us. So, let's fix that before converting things to make checkpatch happy. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Robert Foss <robert.foss@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210326203807.105754-20-lyude@redhat.com
2021-03-26drm/mst: Enhance MST topology loggingEryk Brol1-11/+48
[why] MST topology print was missing fec logging and pdt printed as an int wasn't clear. vcpi and payload info was printed as an arbitrary series of ints which requires user to know the ordering of the prints, making the logs difficult to use. [how] -add fec logging -add pdt parsing into strings -format vcpi and payload info into tables with headings -clean up topology prints Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Eryk Brol <eryk.brol@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210325180614.37060-1-eryk.brol@amd.com
2021-03-16Merge tag 'drm-misc-next-2021-03-03' of ↵Dave Airlie1-13/+22
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.13: UAPI Changes: Cross-subsystem Changes: Core Changes: - %p4cc printk format modifier - atomic: introduce drm_crtc_commit_wait, rework atomic plane state helpers to take the drm_commit_state structure - dma-buf: heaps rework to return a struct dma_buf - simple-kms: Add plate state helpers - ttm: debugfs support, removal of sysfs Driver Changes: - Convert drivers to shadow plane helpers - arc: Move to drm/tiny - ast: cursor plane reworks - gma500: Remove TTM and medfield support - mxsfb: imx8mm support - panfrost: MMU IRQ handling rework - qxl: rework to better handle resources deallocation, locking - sun4i: Add alpha properties for UI and VI layers - vc4: RPi4 CEC support - vmwgfx: doc cleanup Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210303100600.dgnkadonzuvfnu22@gilmour
2021-02-24drm/dp_mst: Set CLEAR_PAYLOAD_ID_TABLE as broadcastWayne Lin1-1/+3
[Why & How] According to DP spec, CLEAR_PAYLOAD_ID_TABLE is a path broadcast request message and current implementation is incorrect. Fix it. Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210224101521.6713-3-Wayne.Lin@amd.com
2021-02-24drm/dp_mst: Revise broadcast msg lct & lcrWayne Lin1-4/+9
[Why & How] According to DP spec, broadcast message LCT equals to 1 and LCR equals to 6. Current implementation is incorrect. Fix it. In addition, revise a bit the hdr->rad handling to include broadcast case. Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210224101521.6713-2-Wayne.Lin@amd.com
2021-02-21Merge tag 'drm-next-2021-02-19' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-4/+4
Pull drm updates from Dave Airlie: "A pretty normal tree, lots of refactoring across the board, ttm, i915, nouveau, and bunch of features in various drivers. docs: - lots of updated docs core: - require crtc to have unique primary plane - fourcc macro fix - PCI bar quirk for bar resizing - don't sent hotplug on error - move vm code to legacy - nuke hose only used on old oboslete alpha dma-buf: - kernel doc updates - improved lock tracking dp/hdmi: - DP-HDMI2.1 protocol converter support ttm: - bo size handling cleanup - release a pinned bo warning - cleanup lru handler - avoid using pages with drm_prime_sg_to_page_addr_arrays cma-helper: - prime/mmap fixes bridge: - add DP support gma500: - remove gma3600 support i915: - try eDP fast/narrow link again with fallback - Intel eDP backlight control - replace display register read/write macros - refactor intel_display.c - display power improvements - HPD code cleanup - Rocketlake display fixes - Power/backlight/RPM fixes - DG1 display fix - IVB/BYT clear residuals security fix again - make i915 mitigations options via parameter - HSW GT1 GPU hangs fixes - DG1 workaround hang fixes - TGL DMAR hang avoidance - Lots of GT fixes - follow on fixes for residuals clear - gen7 per-engine-reset support - HDCP2.2 + HDCP1.4 GEN12 DP MST support - TGL clear color support - backlight refactoring - VRR/Adaptive sync enabling on DP/EDP for TGL+ - async flips for all ilk+ amdgpu: - rework IH ring handling (Vega/Navi) - rework HDP handling (Vega/Navi) - swSMU updates for renoir/vangogh - Sienna Cichild overdrive support - FP16 on DCE8-11 support - GPU reset on navy flounder/vangogh - SMU profile fixes for APU - SR-IOV fixes - Vangogh SMU fixes - fan speed control fixes amdkfd: - config handling fix - buffer free fix - recursive lock warnings fix nouveau: - Turing MMU fault recovery fixes - mDP connectors reporting fix - audio locking fixes - rework engines/instances code to support new scheme tegra: - VIC newer firmware support - display/gr2d fixes for older tegra - pm reference leak fix mediatek: - SOC MT8183 support - decouple sub driver + share mtk mutex driver radeon: - PCI resource fix for some platforms ingenic: - pm support - 8-bit delta RGB panels vmwgfx: - managed driver helpers vc4: - BCM2711 DSI1 support - converted to atomic helpers - enable 10/12 bpc outputs - gem prime mmap helpers - CEC fix omap: - use degamma table - CTM support - rework DSI support imx: - stack usage fixes - drm managed support - imx-tve clock provider leak fix - rcar-du: - default mode fixes - conversion to managed API hisilicon: - use simple encoder vkms: - writeback connector support d3: - BT2020 support" * tag 'drm-next-2021-02-19' of git://anongit.freedesktop.org/drm/drm: (1459 commits) drm/amdgpu: Set reference clock to 100Mhz on Renoir (v2) drm/radeon: OLAND boards don't have VCE drm/amdkfd: Fix recursive lock warnings drm/amd/display: Add FPU wrappers to dcn21_validate_bandwidth() drm/amd/display: Fix potential integer overflow drm/amdgpu/display: remove hdcp_srm sysfs on device removal drm/amdgpu: fix CGTS_TCC_DISABLE register offset on gfx10.3 drm/i915/gt: Correct surface base address for renderclear drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling drm/nouveau/top/ga100: initial support drm/nouveau/top: add ioctrl/nvjpg drm/nouveau/privring: rename from ibus drm/nouveau/nvkm: remove nvkm_subdev.index drm/nouveau/nvkm: determine subdev id/order from layout drm/nouveau/vic: switch to instanced constructor drm/nouveau/sw: switch to instanced constructor drm/nouveau/sec2: switch to instanced constructor drm/nouveau/sec: switch to instanced constructor drm/nouveau/pm: switch to instanced constructor drm/nouveau/nvenc: switch to instanced constructor ...
2021-02-18drm/dp_mst: Tune down the WARN modesetting a port with full_pbn=0Imre Deak1-3/+8
It's possible to modeset a connector/mst port that has a 0 full_pbn value: if the sink on the port deasserts its HPD and a branch device reports this via a CSN with the port's ddps=0 and pdt!=NONE the driver clears full_pbn, but the corresponding connector can be still modesetted. This happened on a DELL U2719D monitor as the branch device and an LG 27UL650-W daisy-chained to it, the LG monitor generating a long HPD pulse (doing this for some reason always when waking up from some power saving state). Tune down the WARN about this scenario to a debug message. v2: Use the correct atomic debug message level. (Lyude) References: https://gitlab.freedesktop.org/drm/intel/-/issues/1917 Cc: Lyude Paul <lyude@redhat.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210216123448.410545-1-imre.deak@intel.com
2021-02-12Merge branch 'drm-misc-fixes' of git://anongit.freedesktop.org/drm/drm-misc ↵Dave Airlie1-0/+1
into drm-fixes (I've pulled from a non-tag to get the ttm regression fix) drm-misc-fixes-2021-02-10: * dp_mst: Don't report un-attached ports as connected * sun4i: tcon1 sync polarity fix; Always set HDMI clock rate; Fix H6 HDMI PHY config; Fix H6 max frequency * vc4: Fix buffer overflow * xlnx: Fix memory leak * ttm: page pool regression fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YCPo6g3gDxD3P//h@linux-uq9g
2021-02-09drm/dp_mst: Don't cache EDIDs for physical portsImre Deak1-1/+2
Caching EDIDs for physical ports prevents updating the EDID if a port gets reconnected via a Connection Status Notification message, fix this. Fixes: db1a07956968 ("drm/dp_mst: Handle SST-only branch device case") Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Lyude Paul <lyude@redhat.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210201120145.350258-2-imre.deak@intel.com (cherry picked from commit 468091531c2e5c49f55d8c6f1d036ce997d24e13) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-04drm/dp_mst: Use DP_MST_LOGICAL_PORT_0 instead of magic numberImre Deak1-2/+1
Use the macro defined for the first logical port instead of the corresponding magic number. Cc: Lyude Paul <lyude@redhat.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210201120145.350258-4-imre.deak@intel.com
2021-02-04drm/dp_mst: Remove redundant tile property settingImre Deak1-3/+1
drm_get_edid() already updates the tile property since commit 2de3a078497b ("drm/dp: Set the connector's TILE property even for DP SST connectors") so no need to update it after calling this function. Cc: Lyude Paul <lyude@redhat.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210201120145.350258-3-imre.deak@intel.com
2021-02-04drm/dp_mst: Don't cache EDIDs for physical portsImre Deak1-1/+2
Caching EDIDs for physical ports prevents updating the EDID if a port gets reconnected via a Connection Status Notification message, fix this. Fixes: db1a07956968 ("drm/dp_mst: Handle SST-only branch device case") Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Lyude Paul <lyude@redhat.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210201120145.350258-2-imre.deak@intel.com
2021-02-04Merge tag 'drm-intel-next-2021-01-29' of ↵Dave Airlie1-6/+18
git://anongit.freedesktop.org/drm/drm-intel into drm-next - WARN if plane src coords are too big (Ville) - Prevent double YUV range correction on HDR planes (Andres) - DP MST related Fixes (Sean, Imre) - More clean-up around DRAM detection code (Jose) - Actually async flips enable for all ilk+ platforms (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210129225328.GA1041349@intel.com
2021-02-03drm/dp_mst: Don't report ports connected if nothing is attached to themImre Deak1-0/+1
Reporting a port as connected if nothing is attached to them leads to any i2c transactions on this port trying to use an uninitialized i2c adapter, fix this. Let's account for this case even if branch devices have no good reason to report a port as plugged with their peer device type set to 'none'. Fixes: db1a07956968 ("drm/dp_mst: Handle SST-only branch device case") References: https://gitlab.freedesktop.org/drm/intel/-/issues/2987 References: https://gitlab.freedesktop.org/drm/intel/-/issues/1963 Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Lyude Paul <lyude@redhat.com> Cc: <stable@vger.kernel.org> # v5.5+ Cc: intel-gfx@lists.freedesktop.org Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Reported-by: Thiago Macieira <gitlab@gitlab.freedesktop.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210201120145.350258-1-imre.deak@intel.com
2021-02-02drm/dp/mst: Export drm_dp_get_vc_payload_bw()Imre Deak1-6/+18
This function will be needed by the next patch where the driver calculates the BW based on driver specific parameters, so export it. At the same time sanitize the function params, passing the more natural link rate instead of the encoding of the same rate. v2: - Fix function documentation. (Lyude) Cc: Lyude Paul <lyude@redhat.com> Cc: Ville Syrjala <ville.syrjala@intel.com> Cc: <stable@vger.kernel.org> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210125173636.1733812-1-imre.deak@intel.com (cherry picked from commit a321fc2b4e60fc1b39517d26c8104351636a6062) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-01-29Merge tag 'drm-intel-next-2021-01-27' of ↵Dave Airlie1-2/+1
git://anongit.freedesktop.org/drm/drm-intel into drm-next - HDCP 2.2 and HDCP 1.4 Gen12 DP MST support (Anshuman) - Fix DP vswing settings and handling (Imre, Ville) - Various display code clean-up (Jani, Ville) - Various display refactoring, including split out of pps, aux, and fdi (Ja\ ni, Dave) - Add DG1 missing workarounds (Jose) - Fix display color conversion (Chris, Ville) - Try to guess PCH type even without ISA bridge (Zhenyu) - More backlight refactor (Lyude) - Support two CSC module on gen11 and later (Lee) - Async flips for all ilk+ platforms (Ville) - Clear color support for TGL (RK) - Add a helper to read data from a GEM object page (Imre) - VRR/Adaptive Sync Enabling on DP/eDP for TGL+ (Manasi, Ville Aditya) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210127140822.GA711686@intel.com
2021-01-28drm/dp/mst: Export drm_dp_get_vc_payload_bw()Imre Deak1-6/+18
This function will be needed by the next patch where the driver calculates the BW based on driver specific parameters, so export it. At the same time sanitize the function params, passing the more natural link rate instead of the encoding of the same rate. v2: - Fix function documentation. (Lyude) Cc: Lyude Paul <lyude@redhat.com> Cc: Ville Syrjala <ville.syrjala@intel.com> Cc: <stable@vger.kernel.org> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210125173636.1733812-1-imre.deak@intel.com
2021-01-19drm/dp: Revert "drm/dp: Introduce EDID-based quirks"Lyude Paul1-2/+1
This reverts commit 0883ce8146ed6074c76399f4e70dbed788582e12. Originally these quirks were added because of the issues with using the eDP backlight interfaces on certain laptop panels, which made it impossible to properly probe for DPCD backlight support without having a whitelist for panels that we know have working VESA backlight control interfaces over DPCD. As well, it should be noted it was impossible to use the normal sink OUI for recognizing these panels as none of them actually filled out their OUIs, hence needing to resort to checking EDIDs. At the time we weren't really sure why certain panels had issues with DPCD backlight controls, but we eventually figured out that there was a second interface that these problematic laptop panels actually did work with and advertise properly: Intel's proprietary backlight interface for HDR panels. So far the testing we've done hasn't brought any panels to light that advertise this interface and don't support it properly, which means we finally have a real solution to this problem. As a result, we now have no need for the force DPCD backlight quirk, and furthermore this also removes the need for any kind of EDID quirk checking in DRM. So, let's just revert it for now since we were the only driver using this. v3: * Rebase v2: * Fix indenting error picked up by checkpatch in intel_edp_init_connector() Signed-off-by: Lyude Paul <lyude@redhat.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Cc: thaytan@noraisin.net Cc: Vasily Khoruzhick <anarsoul@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210114221709.2261452-6-lyude@redhat.com
2021-01-12drm: distinguish return value of drm_dp_check_and_send_link_addressXiaogang Chen1-1/+1
drm_dp_check_and_send_link_address discovers MST device topology. It can return both positive and negative values. When it returns positive values there is no error found. If it returns negative values there is error found, such as get NAK , timeout, etc. Following drm_kms_helper_hotplug_event should be called when drm_dp_check_and_send_link_address returns positive value. Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com> Acked-by: Simon Ser <contact@emersion.fr> Signed-off-by: Simon Ser <contact@emersion.fr> (re-formatted commit message) Link: https://patchwork.freedesktop.org/patch/msgid/DM6PR12MB2602B6281BF8C9430115E03BE3AA0@DM6PR12MB2602.namprd12.prod.outlook.com
2020-11-17drm/drm_dp_mst_topology: Remove set but never used variable 'len'Lee Jones1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/drm_dp_mst_topology.c: In function ‘drm_dp_send_query_stream_enc_status’: drivers/gpu/drm/drm_dp_mst_topology.c:3263:6: warning: variable ‘len’ set but not used [-Wunused-but-set-variable] Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-4-lee.jones@linaro.org
2020-11-10Revert "drm/dp_mst: Retrieve extended DPCD caps for topology manager"Koba Ko1-4/+3
This reverts commit ad44c03208e46b83e4ae3269e32c9e524aa71cf8. Currently DRM driver assume the source device caps is higher than the MST device caps. With this commit, this statement would be broken. e.g. the source device only support DP1.2 and the mst device support DP1.4. Signed-off-by: Koba Ko <koba.ko@canonical.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201103034907.72129-1-koba.ko@canonical.com
2020-11-02Merge drm/drm-next into drm-misc-nextMaxime Ripard1-0/+150
Daniel needs -rc2 in drm-misc-next to merge some patches Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-09-23Merge tag 'drm-misc-next-2020-09-21' of ↵Dave Airlie1-16/+90
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.10: UAPI Changes: Cross-subsystem Changes: - virtio: Merged a PR for patches that will affect drm/virtio Core Changes: - dev: More devm_drm convertions and removal of drm_dev_init - atomic: Split out drm_atomic_helper_calc_timestamping_constants of drm_atomic_helper_update_legacy_modeset_state - ttm: More rework Driver Changes: - i915: selftests improvements - panfrost: support for Amlogic SoC - vc4: one fix - tree-wide: conversions to devm_drm_dev_alloc, - ast: simplifications of the atomic modesetting code - panfrost: multiple fixes - vc4: multiple fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200921152956.2gxnsdgxmwhvjyut@gilmour.lan
2020-09-22drm/dp_mst: Retrieve extended DPCD caps for topology managerKoba Ko1-3/+4
As per DP-1.3, First check DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT. If DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT is 1,read the DP_DP13_DPCD_REV to get the faster capability. If DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT is 0,read DP_DPCD_REV. Signed-off-by: Koba Ko <koba.ko@canonical.com> Reviewed-by: Lyude Paul <lyude@redhat.com> [added aux name to drm_dbg_kms() call] Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200922065313.4794-1-koba.ko@canonical.com
2020-09-14Merge drm/drm-next into drm-misc-nextMaxime Ripard1-2/+24
Paul Cercueil needs some patches in -rc5 to apply new patches for ingenic properly. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-09-11Merge drm/drm-next into drm-intel-next-queuedRodrigo Vivi1-2/+24
Sync drm-intel-gt-next here so we can have an unified fixes flow. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-09-09Merge tag 'topic/nouveau-i915-dp-helpers-and-cleanup-2020-08-31-1' of ↵Dave Airlie1-0/+22
git://anongit.freedesktop.org/drm/drm-misc into drm-next UAPI Changes: None Cross-subsystem Changes: * Moves a bunch of miscellaneous DP code from the i915 driver into a set of shared DRM DP helpers Core Changes: * New DRM DP helpers (see above) Driver Changes: * Implements usage of the aforementioned DP helpers in the nouveau driver, along with some other various HPD related cleanup for nouveau Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/11e59ebdea7ee4f46803a21fe9b21443d2b9c401.camel@redhat.com
2020-09-01drm/dp_mst: Support remote i2c writesSam McNally1-16/+90
For DP MST outputs, the i2c device currently only supports transfers that can be implemented using remote i2c reads. Such transfers must consist of zero or more write transactions followed by one read transaction. DDC/CI commands require standalone write transactions and hence aren't supported. Since each remote i2c write is handled as a separate transfer, remote i2c writes can support transfers consisting of write transactions, where all but the last have I2C_M_STOP set. According to the DDC/CI 1.1 standard, DDC/CI commands only require a single write or read transaction in a transfer, so this is sufficient. For i2c transfers meeting the above criteria, generate and send a remote i2c write message for each transaction. Add the trivial remote i2c write reply parsing support so remote i2c write acks bubble up correctly. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/37 Signed-off-by: Sam McNally <sammc@chromium.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200727160225.1.I4e95a534de051551cd143e6cb83d4c5a9b0ad1cd@changeid
2020-09-01drm/mst: Add support for QUERY_STREAM_ENCRYPTION_STATUS MST sideband messageSean Paul1-0/+150
Used to query whether an MST stream is encrypted or not. Cc: Lyude Paul <lyude@redhat.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-14-sean@poorly.run #v4 Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-15-sean@poorly.run #v5 Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-15-sean@poorly.run #v6 Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-16-sean@poorly.run #v7 Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-16-sean@poorly.run #v8 Changes in v4: -Added to the set Changes in v5: -None Changes in v6: -Use FIELD_PREP to generate request buffer bitfields (Lyude) -Add mst selftest and dump/decode_sideband_req for QSES (Lyude) Changes in v7: -None Changes in v8: -Reverse the parsing on the hdcp_*x_device_present bits and leave breadcrumb in case this is incorrect (Anshuman) Changes in v8.5: -s/DRM_DEBUG_KMS/drm_dbg_kms/ (Lyude) Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200819143133.46232-1-sean@poorly.run
2020-08-31drm/i915/dp: Extract drm_dp_read_mst_cap()Lyude Paul1-0/+22
Just a tiny drive-by cleanup, we can consolidate i915's code for checking for MST support into a helper to be shared across drivers. v5: * Drop !!() * Move drm_dp_has_mst() out of header * Change name from drm_dp_has_mst() to drm_dp_read_mst_cap() Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Sean Paul <sean@poorly.run> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-10-lyude@redhat.com
2020-08-25Merge tag 'v5.9-rc2' into drm-misc-fixesMaarten Lankhorst1-27/+94
Backmerge requested by Tomi for a fix to omap inconsistent locking state issue, and because we need at least v5.9-rc2 now. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2020-08-17drm/dp_mst: Don't return error code when crtc is nullBhawanpreet Lakha1-2/+2
[Why] In certain cases the crtc can be NULL and returning -EINVAL causes atomic check to fail when it shouln't. This leads to valid configurations failing because atomic check fails. [How] Don't early return if crtc is null Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> [added stable cc] Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: 8ec046716ca8 ("drm/dp_mst: Add helper to trigger modeset on affected DSC MST CRTCs") Cc: <stable@vger.kernel.org> # v5.6+ Link: https://patchwork.freedesktop.org/patch/msgid/20200814170140.24917-1-Bhawanpreet.Lakha@amd.com
2020-08-04drm: fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpiXin Xiong1-3/+4
drm_dp_mst_allocate_vcpi() invokes drm_dp_mst_topology_get_port_validated(), which increases the refcount of the "port". These reference counting issues take place in two exception handling paths separately. Either when “slots” is less than 0 or when drm_dp_init_vcpi() returns a negative value, the function forgets to reduce the refcnt increased drm_dp_mst_topology_get_port_validated(), which results in a refcount leak. Fix these issues by pulling up the error handling when "slots" is less than 0, and calling drm_dp_mst_topology_put_port() before termination when drm_dp_init_vcpi() returns a negative value. Fixes: 1e797f556c61 ("drm/dp: Split drm_dp_mst_allocate_vcpi") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200719154545.GA41231@xin-virtual-machine
2020-07-02drm : Insert blank lines after declarations.Suraj Upadhyay1-0/+20
Resolve checkpatch issues for missing blank lines after declarations. Issues found in multiple files with checkpatch.pl. Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200702131749.GA25710@blackclown
2020-06-24Merge tag 'drm-misc-next-2020-06-19' of ↵Dave Airlie1-24/+70
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.9: UAPI Changes: - Add DRM_MODE_TYPE_USERDEF for video modes specified in cmdline. Cross-subsystem Changes: - Assorted devicetree binding updates. - Add might_sleep() to dma_fence_wait(). - Fix fbdev's get_user_pages_fast() handling, and use pin_user_pages. - Small cleanup with IS_BUILTIN in video/fbdev drivers. - Fix video/hdmi coding style for infoframe size. Core Changes: - Silence vblank output during init. - Fix DP-MST corruption during send msg timeout. - Clear leak in drm_gem_objecs_lookup(). - Make newlines work with force connector attribute. - Fix module refcounting error in drm_encoder_slave, and use new i2c api. - Header fix for drm_managed.c - More struct_mutex removal for !legacy drivers: - Remove gem_free_object() - Removal of drm_gem_object_put_unlocked(). - Show current->comm alongside pid in debug printfs. - Add drm_client_modeset_check() + drm_client_framebuffer_flush(). - Replace drm_fb_swab16 with drm_fb_swap that also supports 32-bits. - Remove mode->vrefresh, and compactify drm_display_mode. - Use drm_* macros for logging and warnings. - Add WARN when drm_gem_get_pages is used on a private obj. - Handle importing and imported dmabuf better in shmem helpers. - Small fix for drm/mm hole size comparison, and remove invalid entry optimization. - Add a drm/mm selftest. - Set DSI connector type for DSI panels. - Assorted small fixes and documentation updates. - Fix DDI I2C device registration for MST ports, and flushing on destroy. - Fix master_set return type, used by vmwgfx. - Make the drm_set/drop_master ioctl symmetrical. Driver Changes: Allow iommu in the sun4i driver and use it for sun8i. - Simplify backlight lookup for omap, amba-clcd and tilcdc. - Hold reg_lock for rockchip. - Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice. - Small assorted fixes to tilcdc, vc4, i915, omap, fbdev/sm712fb, fbdev/pxafb, console/newport_con, msm, virtio, udl, malidp, hdlcd, bridge/ti-sn65dsi86, panfrost. - Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers. - Add support for KOE Allow iommu in the sun4i driver and use it for sun8i. - Simplify backlight lookup for omap, amba-clcd and tilcdc. - Hold reg_lock for rockchip. - Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice. - Small assorted fixes to tilcdc, vc4 (multiple), i915. - Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers. - Add support for KOE TX26D202VM0BWA panel. - Use GEM CMA functions in arc, arm, atmel-hlcdc, fsi-dcu, hisilicon, imx, ingenic, komeda, malidp, mcde, meson, msxfb, rcar-du, shmobile, stm, sti, tilcdc, tve200, zte. - Remove gem_print_info. - Improve gem_create_object_helper so udl can use shmem helpers. - Convert vc4 dt bindings to schemas, and add clock properties. - Device initialization cleanups for mgag200. - Add a workaround to fix DP-MST short pulses handling on broken hardware in i915. - Allow build test compiling arm drivers. - Use managed pci functions in mgag200 and ast. - Use dev_groups in malidp. - Add per pixel alpha support for PX30 VOP in rockchip. - Silence deferred probe logs in panfrost. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/001cd9a6-405d-4e29-43d8-354f53ae4e8b@linux.intel.com
2020-06-11drm/dp_mst: Fix flushing the delayed port/mstb destroy workImre Deak1-3/+16
Atm, a pending delayed destroy work during module removal will be canceled, leaving behind MST ports, mstbs. Fix this by using a dedicated workqueue which will be drained of requeued items as well when destroying it. v2: - Check if wq is NULL before calling destroy_workqueue(). Cc: Lyude Paul <lyude@redhat.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200610134704.25270-1-imre.deak@intel.com
2020-06-11drm/dp_mst: Fix the DDC I2C device registration of an MST portImre Deak1-12/+16
During the initial MST probing an MST port's I2C device will be registered using the kdev of the DRM device as a parent. Later after MST Connection Status Notifications this I2C device will be re-registered with the kdev of the port's connector. This will also move inconsistently the I2C device's sysfs entry from the DRM device's sysfs dir to the connector's dir. Fix the above by keeping the DRM kdev as the parent of the I2C device. Ideally the connector's kdev would be used as a parent, similarly to non-MST connectors, however that needs some more refactoring to ensure the connector's kdev is already available early enough. So keep the existing (initial) behavior for now. Cc: <stable@vger.kernel.org> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200607212522.16935-2-imre.deak@intel.com
2020-06-11drm/dp_mst: Fix the DDC I2C device unregistration of an MST portImre Deak1-1/+2
The WARN below triggers during the removal of an MST port. The problem is that the parent device's (the connector's kdev) sysfs directory is removed recursively when the connector is unregistered (even though the I2C device holds a reference on the parent device). To fix this set first the Peer Device Type to none which will remove the I2C device. Note that atm, inconsistently, the parent of the I2C device is initially set to the DRM kdev and after a Connection Status Notification the parent may be reset to be the connector's kdev. This problem is addressed by the next patch. [ 4462.989299] ------------[ cut here ]------------ [ 4463.014940] sysfs group 'power' not found for kobject 'i2c-24' [ 4463.034664] WARNING: CPU: 0 PID: 970 at fs/sysfs/group.c:281 sysfs_remove_group+0x71/0x80 [ 4463.044357] Modules linked in: snd_hda_intel i915 drm_kms_helper(O) drm netconsole snd_hda_codec_hdmi mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul snd_intel_dspcf g crc32_pclmul snd_hda_codec snd_hwdep ghash_clmulni_intel snd_hda_core asix usbnet kvm_intel mii i2c_algo_bit snd_pcm syscopyarea sysfillrect e1000e sysimgblt fb_sys_fops prim e_numbers ptp pps_core i2c_i801 r8169 mei_me realtek mei [last unloaded: drm] [ 4463.044399] CPU: 0 PID: 970 Comm: kworker/0:2 Tainted: G O 5.7.0+ #172 [ 4463.044402] Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP [ 4463.044423] Workqueue: events drm_dp_delayed_destroy_work [drm_kms_helper] [ 4463.044428] RIP: 0010:sysfs_remove_group+0x71/0x80 [ 4463.044431] Code: 48 89 df 5b 5d 41 5c e9 cd b6 ff ff 48 89 df e8 95 b4 ff ff eb cb 49 8b 14 24 48 8b 75 00 48 c7 c7 20 0f 3f 82 e8 9f c5 d7 ff <0f> 0b 5b 5d 41 5c c3 0f 1f 84 00 00 00 00 00 48 85 f6 74 31 41 54 [ 4463.044433] RSP: 0018:ffffc900018bfbf0 EFLAGS: 00010282 [ 4463.044436] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001 [ 4463.044439] RDX: 0000000080000001 RSI: ffff88849e828f38 RDI: 00000000ffffffff [ 4463.052970] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:100:plane 2B] 00000000c2160caa state to 00000000d172564a [ 4463.070533] RBP: ffffffff820cea20 R08: ffff88847f4b8958 R09: 0000000000000000 [ 4463.070535] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88848a725018 [ 4463.070537] R13: 0000000000000000 R14: ffffffff827090e0 R15: 0000000000000002 [ 4463.070539] FS: 0000000000000000(0000) GS:ffff88849e800000(0000) knlGS:0000000000000000 [ 4463.070541] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4463.070543] CR2: 00007fdf8a756538 CR3: 0000000489684001 CR4: 0000000000760ef0 [ 4463.070545] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4463.070547] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 4463.070549] PKRU: 55555554 [ 4463.070551] Call Trace: [ 4463.070560] device_del+0x84/0x400 [ 4463.070571] cdev_device_del+0x10/0x30 [ 4463.070578] put_i2c_dev+0x69/0x80 [ 4463.070584] i2cdev_detach_adapter+0x2e/0x60 [ 4463.070591] notifier_call_chain+0x34/0x90 [ 4463.070599] blocking_notifier_call_chain+0x3f/0x60 [ 4463.070606] device_del+0x7c/0x400 [ 4463.087817] ? lockdep_init_map_waits+0x57/0x210 [ 4463.087825] device_unregister+0x11/0x60 [ 4463.087829] i2c_del_adapter+0x249/0x310 [ 4463.087846] drm_dp_port_set_pdt+0x6b/0x2c0 [drm_kms_helper] [ 4463.087862] drm_dp_delayed_destroy_work+0x2af/0x350 [drm_kms_helper] [ 4463.087876] process_one_work+0x268/0x600 [ 4463.105438] ? __schedule+0x30c/0x920 [ 4463.105451] worker_thread+0x37/0x380 [ 4463.105457] ? process_one_work+0x600/0x600 [ 4463.105462] kthread+0x140/0x160 [ 4463.105466] ? kthread_park+0x80/0x80 [ 4463.105474] ret_from_fork+0x24/0x50 Cc: <stable@vger.kernel.org> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200607212522.16935-1-imre.deak@intel.com
2020-06-11drm/i915/dp_mst: Work around out-of-spec adapters filtering short pulsesImre Deak1-3/+29
Some TypeC -> native DP adapters, at least the Club 3D CAC-1557 adapter, incorrectly filter out HPD short pulses with a duration less than ~540 usec, leading to MST probe failures. According to the DP Standard 2.0 section 5.1.4: - DP sinks should generate short pulses in the 500 usec -> 1 msec range - DP sources should detect short pulses in the 250 usec -> 2 msec range According to the DP Alt Mode on TypeC Standard section 3.9.2, adapters should detect and forward short pulses according to how sources should detect them as specified in the DP Standard (250 usec -> 2 msec). Based on the above filtering out short pulses with a duration less than 540 usec is incorrect. To make such adapters work add support for a driver polling on MST inerrupt flags, and wire this up in the i915 driver. The sink can clear an interrupt it raised after 110 msec if the source doesn't respond, so use a 50 msec poll period to avoid missing an interrupt. Polling of the MST interrupt flags is explicitly allowed by the DP Standard. This fixes MST probe failures I saw using this adapter and a DELL U2515H monitor. v2: - Fix the wait event timeout for the no-poll case. v3 (Ville): - Fix the short pulse duration limits in the commit log prescribed by the DP Standard. - Add code comment explaining why/how polling is used. - Factor out a helper to schedule the port's hpd irq handler and move it to the rest of hotplug handlers. - Document the new MST callback. - s/update_hpd_irq_state/poll_hpd_irq/ Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200604184500.23730-2-imre.deak@intel.com
2020-06-11drm/dp_mst: Sanitize mgr->qlock locking in drm_dp_mst_wait_tx_reply()Imre Deak1-1/+1
Make the locking look symmetric with the unlocking. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200603211040.8190-2-imre.deak@intel.com
2020-06-02Merge tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-227/+175
Pull drm updates from Dave Airlie: "Highlights: - Core DRM had a lot of refactoring around managed drm resources to make drivers simpler. - Intel Tigerlake support is on by default - amdgpu now support p2p PCI buffer sharing and encrypted GPU memory Details: core: - uapi: error out EBUSY when existing master - uapi: rework SET/DROP MASTER permission handling - remove drm_pci.h - drm_pci* are now legacy - introduced managed DRM resources - subclassing support for drm_framebuffer - simple encoder helper - edid improvements - vblank + writeback documentation improved - drm/mm - optimise tree searches - port drivers to use devm_drm_dev_alloc dma-buf: - add flag for p2p buffer support mst: - ACT timeout improvements - remove drm_dp_mst_has_audio - don't use 2nd TX slot - spec recommends against it bridge: - dw-hdmi various improvements - chrontel ch7033 support - fix stack issues with old gcc hdmi: - add unpack function for drm infoframe fbdev: - misc fbdev driver fixes i915: - uapi: global sseu pinning - uapi: OA buffer polling - uapi: remove generated perf code - uapi: per-engine default property values in sysfs - Tigerlake GEN12 enabled. - Lots of gem refactoring - Tigerlake enablement patches - move to drm_device logging - Icelake gamma HW readout - push MST link retrain to hotplug work - bandwidth atomic helpers - ICL fixes - RPS/GT refactoring - Cherryview full-ppgtt support - i915 locking guidelines documented - require linear fb stride to be 512 multiple on gen9 - Tigerlake SAGV support amdgpu: - uapi: encrypted GPU memory handling - uapi: add MEM_SYNC IB flag - p2p dma-buf support - export VRAM dma-bufs - FRU chip access support - RAS/SR-IOV updates - Powerplay locking fixes - VCN DPG (powergating) enablement - GFX10 clockgating fixes - DC fixes - GPU reset fixes - navi SDMA fix - expose FP16 for modesetting - DP 1.4 compliance fixes - gfx10 soft recovery - Improved Critical Thermal Faults handling - resizable BAR on gmc10 amdkfd: - uapi: GWS resource management - track GPU memory per process - report PCI domain in topology radeon: - safe reg list generator fixes nouveau: - HD audio fixes on recent systems - vGPU detection (fail probe if we're on one, for now) - Interlaced mode fixes (mostly avoidance on Turing, which doesn't support it) - SVM improvements/fixes - NVIDIA format modifier support - Misc other fixes. adv7511: - HDMI SPDIF support ast: - allocate crtc state size - fix double assignment - fix suspend bochs: - drop connector register cirrus: - move to tiny drivers. exynos: - fix imported dma-buf mapping - enable runtime PM - fixes and cleanups mediatek: - DPI pin mode swap - config mipi_tx current/impedance lima: - devfreq + cooling device support - task handling improvements - runtime PM support pl111: - vexpress init improvements - fix module auto-load rcar-du: - DT bindings conversion to YAML - Planes zpos sanity check and fix - MAINTAINERS entry for LVDS panel driver mcde: - fix return value mgag200: - use managed config init stm: - read endpoints from DT vboxvideo: - use PCI managed functions - drop WC mtrr vkms: - enable cursor by default rockchip: - afbc support virtio: - various cleanups qxl: - fix cursor notify port hisilicon: - 128-byte stride alignment fix sun4i: - improved format handling" * tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drm: (1401 commits) drm/amd/display: Fix potential integer wraparound resulting in a hang drm/amd/display: drop cursor position check in atomic test drm/amdgpu: fix device attribute node create failed with multi gpu drm/nouveau: use correct conflicting framebuffer API drm/vblank: Fix -Wformat compile warnings on some arches drm/amdgpu: Sync with VM root BO when switching VM to CPU update mode drm/amd/display: Handle GPU reset for DC block drm/amdgpu: add apu flags (v2) drm/amd/powerpay: Disable gfxoff when setting manual mode on picasso and raven drm/amdgpu: fix pm sysfs node handling (v2) drm/amdgpu: move gpu_info parsing after common early init drm/amdgpu: move discovery gfx config fetching drm/nouveau/dispnv50: fix runtime pm imbalance on error drm/nouveau: fix runtime pm imbalance on error drm/nouveau: fix runtime pm imbalance on error drm/nouveau/debugfs: fix runtime pm imbalance on error drm/nouveau/nouveau/hmm: fix migrate zero page to GPU drm/nouveau/nouveau/hmm: fix nouveau_dmem_chunk allocations drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST drm/nouveau/kms/nv50-: Move 8BPC limit for MST into nv50_mstc_get_modes() ...
2020-05-19Merge tag 'noinstr-lds-2020-05-19' into core/rcuThomas Gleixner1-2/+7
Get the noinstr section and annotation markers to base the RCU parts on.
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-05 08:01:22 +0000