summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/drm_dp_helper.c
AgeCommit message (Collapse)AuthorFilesLines
2017-07-21drm/dp: Don't trust drm_dp_downstream_id()Chris Wilson1-1/+2
Before we interpret drm_dp_downstream_id() as a string, make sure it is NULL terminated, even when drm_dp_downtsream_id() fails. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101660 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170720174532.23377-2-chris@chris-wilson.co.uk
2017-07-21drm/dp: Fix read pointer for drm_dp_downsteam_debug()Chris Wilson1-1/+1
Pass in the array and not a pointer to the array to drm_dp_dpcd_read(). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170720174532.23377-1-chris@chris-wilson.co.uk
2017-05-29drm/dp: start a DPCD based DP sink/branch device quirk databaseJani Nikula1-2/+50
Face the fact, there are Display Port sink and branch devices out there in the wild that don't follow the Display Port specifications, or they have bugs, or just otherwise require special treatment. Start a common quirk database the drivers can query based on the DP device identification. At least for now, we leave the workarounds for the drivers to implement as they see fit. For starters, add a branch device that can't handle full 24-bit main link Mdiv and Ndiv main link attributes properly. Naturally, the workaround of reducing main link attributes for all devices ended up in regressions for other devices. So here we are. v2: Rebase on DRM DP desc read helpers v3: Fix the OUI memcmp blunder (Clint) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Clint Taylor <clinton.a.taylor@intel.com> Cc: Adam Jackson <ajax@redhat.com> Cc: Harry Wentland <harry.wentland@amd.com> Tested-by: Clinton Taylor <clinton.a.taylor@intel.com> Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # v2 Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/91ec198dd95258dbf3bee2f6be739e0da73b4fdd.1495105635.git.jani.nikula@intel.com
2017-05-29drm/dp: add helper for reading DP sink/branch device desc from DPCDJani Nikula1-0/+35
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/acba54da7d80eafea9e59a893e27e3c31028c0ba.1495105635.git.jani.nikula@intel.com
2017-03-07drm/dp: Add missing description to parameterTomeu Vizoso1-0/+1
Gabriel Krisman reported these warnings when building the documentation: ./drivers/gpu/drm/drm_dp_helper.c:1165: warning: No description found for parameter 'crtc' ./drivers/gpu/drm/drm_dp_helper.c:1166: warning: No description found for parameter 'crtc' Reported-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170307203511.14258-1-tomeu.vizoso@collabora.com
2017-03-06drm/dp: add helpers for capture of frame CRCsTomeu Vizoso1-0/+126
Adds helpers for starting and stopping capture of frame CRCs through the DPCD. When capture is on, a worker waits for vblanks and retrieves the frame CRC to put it in the queue on the CRTC that is using the eDP connector, so it's passed to userspace. v2: Reuse drm_crtc_wait_one_vblank Update locking, as drm_crtc_add_crc_entry now takes the lock v3: Don't call wake_up_interruptible directly, that's now done in drm_crtc_add_crc_entry. v4: Style fixes (Sean Paul) Reworked retry of CRC reads (Sean Paul) Flush worker after stopping CRC generationa (Sean Paul) v5: Move back to make the retry explicitly once v6: Set and use the drm_crtc backpointer (Sean Paul) Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170303133936.14964-3-tomeu.vizoso@collabora.com
2017-01-25drm/kms-helpers: Use recommened kerneldoc for struct member refsDaniel Vetter1-1/+1
I just learned that &struct_name.member_name works and looks pretty even. It doesn't (yet) link to the member directly though, which would be really good for big structures or vfunc tables (where the per-member kerneldoc tends to be long). Also some minor drive-by polish where it makes sense, I read a lot of docs ... v2: Comments from Gustavo. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Rewiewed-by: Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-2-daniel.vetter@ffwll.ch
2016-10-11Merge tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds1-3/+188
Pull drm updates from Dave Airlie: "Core: - Fence destaging work - DRIVER_LEGACY to split off legacy drm drivers - drm_mm refactoring - Splitting drm_crtc.c into chunks and documenting better - Display info fixes - rbtree support for prime buffer lookup - Simple VGA DAC driver Panel: - Add Nexus 7 panel - More simple panels i915: - Refactoring GEM naming - Refactored vma/active tracking - Lockless request lookups - Better stolen memory support - FBC fixes - SKL watermark fixes - VGPU improvements - dma-buf fencing support - Better DP dongle support amdgpu: - Powerplay for Iceland asics - Improved GPU reset support - UVD/VEC powergating support for CZ/ST - Preinitialised VRAM buffer support - Virtual display support - Initial SI support - GTT rework - PCI shutdown callback support - HPD IRQ storm fixes amdkfd: - bugfixes tilcdc: - Atomic modesetting support mediatek: - AAL + GAMMA engine support - Hook up gamma LUT - Temporal dithering support imx: - Pixel clock from devicetree - drm bridge support for LVDS bridges - active plane reconfiguration - VDIC deinterlacer support - Frame synchronisation unit support - Color space conversion support analogix: - PSR support - Better panel on/off support rockchip: - rk3399 vop/crtc support - PSR support vc4: - Interlaced vblank timing - 3D rendering CPU overhead reduction - HDMI output fixes tda998x: - HDMI audio ASoC support sunxi: - Allwinner A33 support - better TCON support msm: - DT binding cleanups - Explicit fence-fd support sti: - remove sti415/416 support etnaviv: - MMUv2 refactoring - GC3000 support exynos: - Refactoring HDMI DCC/PHY - G2D pm regression fix - Page fault issues with wait for vblank There is no nouveau work in this tree, as Ben didn't get a pull request in, and he was fighting moving to atomic and adding mst support, so maybe best it waits for a cycle" * tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linux: (1412 commits) drm/crtc: constify drm_crtc_index parameter drm/i915: Fix conflict resolution from backmerge of v4.8-rc8 to drm-next drm/i915/guc: Unwind GuC workqueue reservation if request construction fails drm/i915: Reset the breadcrumbs IRQ more carefully drm/i915: Force relocations via cpu if we run out of idle aperture drm/i915: Distinguish last emitted request from last submitted request drm/i915: Allow DP to work w/o EDID drm/i915: Move long hpd handling into the hotplug work drm/i915/execlists: Reinitialise context image after GPU hang drm/i915: Use correct index for backtracking HUNG semaphores drm/i915: Unalias obj->phys_handle and obj->userptr drm/i915: Just clear the mmiodebug before a register access drm/i915/gen9: only add the planes actually affected by ddb changes drm/i915: Allow PCH DPLL sharing regardless of DPLL_SDVO_HIGH_SPEED drm/i915/bxt: Fix HDMI DPLL configuration drm/i915/gen9: fix the watermark res_blocks value drm/i915/gen9: fix plane_blocks_per_line on watermarks calculations drm/i915/gen9: minimum scanlines for Y tile is not always 4 drm/i915/gen9: fix the WaWmMemoryReadLatency implementation drm/i915/kbl: KBL also needs to run the SAGV code ...
2016-09-28Merge tag 'topic/drm-misc-2016-09-25' of ↵Dave Airlie1-0/+1
git://anongit.freedesktop.org/drm-intel into drm-next - more core cleanup patches to prep drm_file to be used for kernel-internal contexts (David Herrmann) - more split-up+docs for drm_crtc.c - lots of small fixes and polish all over * tag 'topic/drm-misc-2016-09-25' of git://anongit.freedesktop.org/drm-intel: (37 commits) drm: bridge: analogix/dp: mark symbols static where possible drm/bochs: mark bochs_connector_get_modes() static drm/bridge: analogix_dp: Improve panel on time drm/bridge: analogix_dp: Don't read EDID if panel present drm/bridge: analogix_dp: Remove duplicated code Revert "drm/i2c: tda998x: don't register the connector" drm: Fix plane type uabi breakage dma-buf/sync_file: free fences array in num_fences is 1 drm/i2c: tda998x: don't register the connector drm: Don't swallow error codes in drm_dev_alloc() drm: Distinguish no name from ENOMEM in set_unique() drm: Remove dirty property from docs drm/doc: Document color space handling drm: Extract drm_color_mgmt.[hc] drm/doc: Polish plane composition property docs drm: Conslidate blending properties in drm_blend.[hc] drm/doc: Polish for drm_plane.[hc] drm: Extract drm_plane.[hc] drm/tilcdc: Add atomic and crtc headers to crtc.c drm: Fix typo in encoder docs ...
2016-09-20Merge tag 'drm-intel-next-2016-09-19' of ↵Dave Airlie1-0/+173
git://anongit.freedesktop.org/drm-intel into drm-next - refactor the sseu code (Imre) - refine guc dmesg output (Dave Gordon) - more vgpu work - more skl wm fixes (Lyude) - refactor dpll code in prep for upfront link training (Jim Bride et al) - consolidate all platform feature checks into intel_device_info (Carlos Santa) - refactor elsp/execlist submission as prep for re-submission after hang recovery and eventually scheduling (Chris Wilson) - allow synchronous gpu reset handling, to remove tricky/impossible/fragile error recovery code (Chris Wilson) - prep work for nonblocking (execlist) submission, using fences to track depencies and drive elsp submission (Chris Wilson) - partial error recover/resubmission of non-guilty batches after hangs (Chris Wilson) - full dma-buf implicit fencing support (Chris Wilson) - dp link training fixes (Jim, Dhinkaran, Navare, ...) - obey dp branch device pixel rate/bpc/clock limits (Mika Kahola), needed for many vga dongles - bunch of small cleanups and polish all over, as usual [airlied: printing macros collided] * tag 'drm-intel-next-2016-09-19' of git://anongit.freedesktop.org/drm-intel: (163 commits) drm/i915: Update DRIVER_DATE to 20160919 drm: Fix DisplayPort branch device ID kernel-doc drm/i915: use NULL for NULL pointers drm/i915: do not use 'false' as a NULL pointer drm/i915: make intel_dp_compute_bpp static drm: Add DP branch device info on debugfs drm/i915: Update bits per component for display info drm/i915: Check pixel rate for DP to VGA dongle drm/i915: Read DP branch device SW revision drm/i915: Read DP branch device HW revision drm/i915: Cleanup DisplayPort AUX channel initialization drm: Read DP branch device id drm: Helper to read max bits per component drm: Helper to read max clock rate drm: Drop VGA from bpc definitions drm: Add missing DP downstream port types drm/i915: Add ddb size field to device info structure drm/i915/guc: general tidying up (submission) drm/i915/guc: general tidying up (loader) drm/i915: clarify PMINTRMSK/pm_intr_keep usage ...
2016-09-19drm: fix implicit declaration build error on ia64Jani Nikula1-0/+1
drivers/gpu/drm/drm_dp_helper.c: In function 'drm_dp_downstream_debug': >> drivers/gpu/drm/drm_dp_helper.c:551:2: error: implicit declaration of >> function 'seq_printf' [-Werror=implicit-function-declaration] seq_printf(m, "\tDP branch device present: %s\n", ^ >> drivers/gpu/drm/drm_dp_helper.c:559:3: error: implicit declaration of >> function 'seq_puts' [-Werror=implicit-function-declaration] seq_puts(m, "\t\tType: DisplayPort\n"); ^ Reported-by: kbuild test robot <fengguang.wu@intel.com> References: https://lists.freedesktop.org/archives/intel-gfx/2016-September/106638.html Fixes: 80209e5f2c42 ("drm: Add DP branch device info on debugfs") Cc: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1474020396-14875-1-git-send-email-jani.nikula@intel.com
2016-09-16drm: Fix DisplayPort branch device ID kernel-docMika Kahola1-0/+1
Fix missing parameter description for DisplayPort branch device ID. This fixes warning of "No description found for parameter 'id[6]'" when creating documentation by 'make htmldocs'. Reported-by: kbuild test robot <fengguang.wu@intel.com> References: https://lists.freedesktop.org/archives/intel-gfx/2016-September/106645.html Fixes: 266d783baaf5 ("drm: Read DP branch device id") Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1474022355-29990-1-git-send-email-mika.kahola@intel.com
2016-09-15drm: Add DP branch device info on debugfsMika Kahola1-0/+85
Read DisplayPort branch device info from through debugfs interface. v2: use drm_dp_helper routines to collect data v3: cleanup to match the drm_dp_helper.c patches introduced earlier in this series v4: move DP branch device info to function 'intel_dp_branch_device_info()' v5: initial step to move debugging info from intel_dp. to drm_dp_helper.c (Daniel) v6: read hw and sw revision without using specific drm_dp_helper routines v7: indentation fixes (Jim Bride) Signed-off-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Jim Bride <jim.bride@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1473419458-17080-12-git-send-email-mika.kahola@intel.com
2016-09-15drm: Read DP branch device idMika Kahola1-0/+12
Read DisplayPort branch device id string. Reviewed-by: Jim Bride <jim.bride@linux.intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1473419458-17080-6-git-send-email-mika.kahola@intel.com
2016-09-15drm: Helper to read max bits per componentMika Kahola1-0/+42
Helper routine to read out maximum supported bits per component for DisplayPort legay converters. v2: Return early if detailed port cap info is not available. Replace if-else ladder with switch-case (Ville) Reviewed-by: Jim Bride <jim.bride@linux.intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1473419458-17080-5-git-send-email-mika.kahola@intel.com
2016-09-15drm: Helper to read max clock rateMika Kahola1-0/+33
Helper routine to read out maximum supported pixel rate for DisplayPort legay VGA converter or TMDS clock rate for other digital legacy converters. The helper returns clock rate in kHz. v2: Return early if detailed port cap info is not available. Replace if-else ladder with switch-case (Ville) Reviewed-by: Jim Bride <jim.bride@linux.intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1473419458-17080-4-git-send-email-mika.kahola@intel.com
2016-08-30i2c: move locking operations to their own structPeter Rosin1-3/+7
This makes it trivial to constify them, so do that. Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-16drm: Don't export dp-aux devnode functionsDaniel Vetter1-1/+2
They're only used internally within the dp helpers. Also nuke the kerneldoc (we only document the driver interface in the drm shared functions). And move the header file from the public include/ directory to the source files into drm_crtc_helper_internal.h, similar to how we already have drm_crtc_internal.h. While at it also move drm_fb_helper_modinit since that belongs in there, too. I noticed this all since I spotted kerneldoc which wasn't pulled into the rst templates. v2: Update Copyright date. Cc: Sean Paul <seanpaul@chromium.org> Cc: Rafael Antognolli <rafael.antognolli@intel.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-16-git-send-email-daniel.vetter@ffwll.ch
2016-08-09drm/dp_helper: Rate limit timeout errors from drm_dp_i2c_do_msg()Lyude1-1/+11
Timeouts can be errors, but timeouts are also usually normal behavior and happen a lot. Since the kernel already lets us know when we're suppressing messages due to rate limiting, rate limit timeout errors so we don't make too much noise in the kernel log. Signed-off-by: Lyude <cpaul@redhat.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1470443443-27252-8-git-send-email-cpaul@redhat.com
2016-08-09drm/dp_helper: Print first error received on failure in drm_dp_dpcd_access()Lyude1-1/+1
Since we always retry in drm_dp_dpcd_access() regardless of the error, we're going to make a lot of noise if the aux->transfer function prints it's own errors (as is the case with radeon). If we can print the error code here, this reduces the need for drivers to do this. So instead of having to print "dp_aux_ch timed out" over 32 times we can just print once. Signed-off-by: Lyude <cpaul@redhat.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1470443443-27252-2-git-send-email-cpaul@redhat.com
2016-08-03drm/dp: Add drm_dp_psr_setup_time()Ville Syrjälä1-0/+32
Add a small helper to parse the PSR setup time from the DPCD PSR capabilities and return the value in microseconds. v2: Don't waste so many bytes on the psr_setup_time_us[] table Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-07-29drm: aux ->transfer() can return 0, deal with itVille Syrjälä1-1/+1
Restore the correct behaviour (as in check msg.reply) when aux ->transfer() returns 0. It got removed in commit 82922da39190 ("drm/dp_helper: Retry aux transactions on all errors") Now I can actually dump the "entire" DPCD on a Dell UP2314Q with ddrescue. It has some offsets in the DPCD that can't be read for some resaon, all you get is defers. Previously ddrescue would just give up at the first unredable offset on account of read() returning 0 means EOF. Here's the ddrescue log for the interested: 0x00000000 0x00001400 + 0x00001400 0x00000030 - 0x00001430 0x000001D0 + 0x00001600 0x00000030 - 0x00001630 0x0001F9D0 + 0x00021000 0x00000001 - 0x00021001 0x000DEFFF + Cc: Lyude <cpaul@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch Cc: stable@vger.kernel.org Fixes: 82922da39190 ("drm/dp_helper: Retry aux transactions on all errors") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-06-17drm: Minimally initialise drm_dp_auxChris Wilson1-5/+23
When trying to split up the initialisation phase and the registration phase, one immediate problem encountered is trying to use our own i2c devices before registration with userspace (to read EDID during device discovery). drm_dp_aux in particular only offers an interface for setting up the device *after* we have exposed the connector via sysfs. In order to break the chicken-and-egg problem, export drm_dp_aux_init() to minimally prepare the i2c device for internal use before drm_connector_register(). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dave Airlie <airlied@redhat.com> Cc: Rafael Antognolli <rafael.antognolli@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: dri-devel@lists.freedesktop.org [danvet: Amend kerneldoc slightly.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1466152398-20157-3-git-send-email-chris@chris-wilson.co.uk
2016-06-17drm: Pass the drm_dp_aux->hw_mutex to i2c for its lockingChris Wilson1-4/+24
Rather than have both drm_dp_aux lock within its transfer, and i2c to lock around the transfer, use the same lock by filling in the locking callbacks that i2c wants to use. We require our own hw_mutex as we bypass i2c_transfer for drm_dp_dpcd_access(). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dave Airlie <airlied@redhat.com> Cc: Rafael Antognolli <rafael.antognolli@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1466152398-20157-2-git-send-email-chris@chris-wilson.co.uk
2016-04-22drm/dp_helper: Perform throw-away read before actual read in drm_dp_dpcd_read()Lyude1-0/+19
This is part of a patch series to migrate all of the workarounds for commonly seen behavior from bad sinks in intel_dp_dpcd_read_wake() to drm's DP helper. Some sinks will just return garbage for the first aux tranaction they receive when coming out of sleep mode, so we need to perform an additional read before the actual read to workaround this. Changes since v5 - If the throwaway read in drm_dp_dpcd_read() fails, return the error from that instead of continuing. This follows the same logic we do in drm_dp_dpcd_access() (e.g. the error from the first transaction may differ from the errors that proceeding attempts might return). Signed-off-by: Lyude <cpaul@redhat.com> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1460730335-5012-1-git-send-email-cpaul@redhat.com
2016-04-22drm/dp_helper: Retry aux transactions on all errorsLyude1-20/+22
This is part of a patch series to migrate all of the workarounds for commonly seen behavior from bad sinks in intel_dp_dpcd_read_wake() to drm's DP helper. We cannot rely on sinks NACKing or deferring when they can't receive transactions, nor can we rely on any other sort of consistent error to know when we should stop retrying. As such, we need to just retry unconditionally on errors. We also make sure here to return the error we encountered during the first transaction, since it's possible that retrying the transaction might return a different error then we had originally. This, along with the previous patch, work around a weird bug with the ThinkPad T560's and it's dock. When resuming the laptop, it appears that there's a short period of time where we're unable to complete any aux transactions, as they all immediately timeout. The only machine I'm able to reproduce this on is the T560 as other production Skylake models seem to be fine. The period during which AUX transactions fail appears to be around 22ms long. AFAIK, the dock for the T560 never actually turns off, the only difference is that it's in SST mode at the start of the resume process, so it's unclear as to why it would need so much time to come back up. There's been a discussion on this issue going on for a while on the intel-gfx mailing list about this that has, in addition to including developers from Intel, also had the correspondence of one of the hardware engineers for Intel: http://www.spinics.net/lists/intel-gfx/msg88831.html http://www.spinics.net/lists/intel-gfx/msg88410.html We've already looked into a couple of possible explanations for the problem: - Calling intel_dp_mst_resume() before right fix. intel_runtime_pm_enable_interrupts(). This was the first fix I tried, and while it worked it definitely wasn't the right fix. This worked because DP aux transactions don't actually require interrupts to work: static uint32_t intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq) { struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); struct drm_device *dev = intel_dig_port->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; i915_reg_t ch_ctl = intel_dp->aux_ch_ctl_reg; uint32_t status; bool done; #define C (((status = I915_READ_NOTRACE(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0) if (has_aux_irq) done = wait_event_timeout(dev_priv->gmbus_wait_queue, C, msecs_to_jiffies_timeout(10)); else done = wait_for_atomic(C, 10) == 0; if (!done) DRM_ERROR("dp aux hw did not signal timeout (has irq: %i)!\n", has_aux_irq); #undef C return status; } When there's no interrupts enabled, we end up timing out on the wait_event_timeout() call, which causes us to check the DP status register once to see if the transaction was successful or not. Since this adds a 10ms delay to each aux transaction, it ends up adding a long enough delay to the resume process for aux transactions to become functional again. This gave us the illusion that enabling interrupts had something to do with making things work again, and put me on the wrong track for a while. - Interrupts occurring when we try to perform the aux transactions required to put the dock back into MST mode. This isn't the problem, as the only interrupts I've observed that come during this timeout period are from the snd_hda_intel driver, and disabling that driver doesn't appear to change the behavior at all. - Skylake's PSR block causing issues by performing aux transactions while we try to bring the dock out of MST mode. Disabling PSR through i915's command line options doesn't seem to change the behavior either, nor does preventing the DMC firmware from being loaded. Since this investigation went on for about 2 weeks, we decided it would be better for the time being to just workaround this issue by making sure AUX transactions wait a short period of time before retrying. Signed-off-by: Lyude <cpaul@redhat.com> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1460559513-32280-3-git-send-email-cpaul@redhat.com
2016-04-22drm/dp_helper: Always wait before retrying native aux transactionsLyude1-5/+4
This is part of a patch series to migrate all of the workarounds for commonly seen behavior from bad sinks in intel_dp_dpcd_read_wake() to drm's DP helper. Some sinks need some time during the process of resuming the system from sleep before they're ready to handle transactions. While it would be nice if they responded with NACKs in these scenarios, this isn't always the case as a few sinks will just timeout on all of the transactions they receive until they're ready. Signed-off-by: Lyude <cpaul@redhat.com> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1460559513-32280-2-git-send-email-cpaul@redhat.com
2016-04-01drm/dp: move hw_mutex up the call stackRob Clark1-10/+17
1) don't let other threads trying to bang on aux channel interrupt the defer timeout/logic 2) don't let other threads interrupt the i2c over aux logic Technically, according to people who actually have the DP spec, this should not be required. In practice, it makes some troublesome Dell monitor (and perhaps others) work, so probably a case of "It's compliant if it works with windows" on the hw vendor's part.. v2: rebased to come before DPCD/AUX logging patch for easier backport to stable branches. Reported-by: Dave Wysochanski <dwysocha@redhat.com> Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1274157 Cc: stable@vger.kernel.org Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-12drm/dp: Add a drm_aux-dev module for reading/writing dpcd registers.Rafael Antognolli1-1/+15
This module is heavily based on i2c-dev. Once loaded, it provides one dev node per DP AUX channel, named drm_dp_auxN, where N is an integer. It's possible to know which connector owns this aux channel by looking at the respective sysfs /sys/class/drm_aux_dev/drm_dp_auxN/connector, if the connector device pointer was correctly set in the aux helper struct. Two main operations are provided on the registers read and write. The address of the register to be read or written is given using lseek. The seek position is updated upon read or write. v2: - lseek is used to select the register to read/write - read/write are used instead of ioctl - no blocking_notifier is used, just a direct callback v3: - use drm_dp_aux_dev prefix for public functions - chardev is named drm_dp_auxN - read/write don't allocate a buffer anymore, and transfer up to 16 bytes a time - remove notifier list from the implementation - option on menuconfig is now a boolean - add inline stub functions to avoid breakage when this option is disabled v4: - fix build system changes - actually disable this module when not selected. v5: - Use kref to avoid device closing while still in use - Don't use list, use an idr for storing aux_dev - Remove "connector" attribute - set aux.dev to the connector drm_connector device, instead of drm_device v6: - Use atomic_t for usage count - Use a mutex instead of spinlock for idr lock - Destroy chardev immediately on unregister - other minor suggestions from Ville v7: - style fixes - error handling fixes v8: - more error handling fixes v9: - remove module_init and module_exit, and add drm_dp_aux_dev_init/exit to drm_kms_helper_init/exit. Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1453417821-2811-3-git-send-email-rafael.antognolli@intel.com
2015-09-24Merge tag 'v4.3-rc2' into topic/drm-miscDaniel Vetter1-5/+95
Backmerge Linux 4.3-rc2 because of conflicts in the dp helper code between bugfixes and new code. Just adjacent lines really. On top of that there's a silent conflict in the new fsl-dcu driver merged into 4.3 and commit 844f9111f6f54f88eb2f0fac121b82ce77193866 Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Wed Sep 2 10:42:40 2015 +0200 drm/atomic: Make prepare_fb/cleanup_fb only take state, v3. which Thierry Reding spotted and provided a fixup for. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-09-08drm/dp: Use I2C_WRITE_STATUS_UPDATE to drain partial I2C_WRITE requestsVille Syrjälä1-4/+39
When an i2c WRITE gets an i2c defer or short i2c ack reply, we are supposed to switch the request from I2C_WRITE to I2C_WRITE_STATUS_UPDATE when we continue to poll for the completion of the request. v2: Don't assume DP_AUX_I2C_WRITE is 0 even though it is, to make the code more obvious to the casual reader (Jani) Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [danvet: Resolve conflict due to changed context.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-02drm/dp: Add dp_aux_i2c_speed_khz module param to set the assume i2c bus speedVille Syrjälä1-3/+10
To help with debugging i2c-over-aux issues, add a module parameter than can be used to tweak the assumed i2c bus speed, and thus the maximum number of retries we will do for each aux message. Cc: Simon Farnsworth <simon.farnsworth@onelan.com> Cc: moosotc@gmail.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-09-02drm/dp: Adjust i2c-over-aux retry count based on message size and i2c bus speedVille Syrjälä1-2/+82
Calculate the number of retries we should do for each i2c-over-aux message based on the time it takes to perform the i2c transfer vs. the aux transfer. We assume the shortest possible length for the aux transfer, and the longest possible (exluding clock stretching) for the i2c transfer. The DP spec has some examples on how to calculate this, but we don't calculate things quite the same way. The spec doesn't account for the retry interval (assumes immediate retry on defer), and doesn't assume the best/worst case behaviour as we do. Note that currently we assume 10 kHz speed for the i2c bus. Some real world devices (eg. some Apple DP->VGA dongle) fails with less than 16 retries. and that would correspond to something close to 15 kHz (with our method of calculating things) But let's just go for 10 kHz to be on the safe side. Ideally we should query/set the i2c bus speed via DPCD but for now this should at leaast remove the regression from the 1->16 byte trasnfer size change. And of course if the sink completes the transfer quicker this shouldn't slow things down since we don't change the interval between retries. I did a few experiments with a DP->DVI dongle I have that allows you to change the i2c bus speed. Here are the results of me changing the actual bus speed and the assumed bus speed and seeing when we start to fail the operation: actual i2c khz assumed i2c khz max retries 1 1 ok -> 2 fail 211 ok -> 106 fail 5 8 ok -> 9 fail 27 ok -> 24 fail 10 17 ok -> 18 fail 13 ok -> 12 fail 100 210 ok -> 211 fail 2 ok -> 1 fail So based on that we have a fairly decent safety margin baked into the formula to calculate the max number of retries. Fixes a regression with some DP dongles from: commit 1d002fa720738bcd0bddb9178e9ea0773288e1dd Author: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Date: Tue Feb 10 18:38:08 2015 +0000 drm/dp: Use large transactions for I2C over AUX v2: Use best case for AUX and worst case for i2c (Simon Farnsworth) Add a define our AUX retry interval and account for it v3: Make everything usecs to avoid confusion about units (Daniel) Add a comment reminding people about the AUX bitrate (Daniel) Use DIV_ROUND_UP() since we're after the "worst" case for i2c Cc: Simon Farnsworth <simon.farnsworth@onelan.com> Cc: moosotc@gmail.com Tested-by: moosotc@gmail.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91451 Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-09-02drm/dp: Define AUX_RETRY_INTERVAL as 500 usVille Syrjälä1-3/+5
Currently we react to native and i2c defers by waiting either 400-500 us or 500-600 us, depending on which code path we take. Consolidate them all to one define AUX_RETRY_INTERVAL which defines the minimum interval. Since we've been using two different intervals pick the longer of them and define AUX_RETRY_INTERVAL as 500 us. For the maximum just use AUX_RETRY_INTERVAL+100 us. I want to have a define for this so that I can use it when calculating the estimated duration of i2c-over-aux transfers. Without a define it would be very easy to change the sleep duration and neglect to update the i2c-over-aux estimates. Cc: Simon Farnsworth <simon.farnsworth@onelan.com> Cc: moosotc@gmail.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-04-20drm: Fix for DP CTS test 4.2.2.5 - I2C DEFER handlingTodd Previte1-2/+8
For test 4.2.2.5 to pass per the Link CTS Core 1.2 rev1.1 spec, the source device must attempt at least 7 times to read the EDID when it receives an I2C defer. The normal DRM code makes only 7 retries, regardless of whether or not the response is a native defer or an I2C defer. Test 4.2.2.5 fails since there are native defers interspersed with the I2C defers which results in less than 7 EDID read attempts. The solution is to add the numer of defers to the retry counter when an I2C DEFER is returned such that another read attempt will be made. This situation should normally only occur in compliance testing, however, as a worse case real-world scenario, it would result in 13 attempts ( 6 native defers, 7 I2C defers) for a single transaction to complete. The net result is a slightly slower response to an EDID read that shouldn't significantly impact overall performance. V2: - Added a check on the number of I2C Defers to limit the number of times that the retries variable will be decremented. This is to address review feedback regarding possible infinite loops from misbehaving sink devices. V3: - Fixed the limit value to 7 instead of 8 to get the correct retry count. - Combined the increment of the defer count into the if-statement V4: - Removed i915 tag from subject as the patch is not i915-specific V5: - Updated the for-loop to add the number of i2c defers to the retry counter such that the correct number of retry attempts will be made Signed-off-by: Todd Previte <tprevite@gmail.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-16drm: Fix the 'native defer' message in drm_dp_i2c_do_msg()Todd Previte1-1/+1
The debug message is missing a newline at the end and it makes the logs hard to read when a device defers a lot. Simple 2-character fix adds the newline at the end. Signed-off-by: Todd Previte <tprevite@gmail.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-23drm/dp: Print the number of bytes processed for aux nacksVille Syrjälä1-2/+2
When doing a native or i2c aux write the sink will indicate the number of bytes written even if it the nacks the transfer. When we receive a nack we just return an error upwards, but it might still be interesting to see how many bytes made it before the nack. So include that information in the debug messages. v2: Also print the message size (Jani) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-11drm/dp: Use large transactions for I2C over AUXSimon Farnsworth1-18/+58
Older DisplayPort to DVI-D Dual Link adapters designed by Bizlink have bugs in their I2C over AUX implementation (fixed in newer revisions). They work fine with Windows, but fail with Linux. It turns out that they cannot keep an I2C transaction open unless the previous read was 16 bytes; shorter reads can only be followed by a zero byte transfer ending the I2C transaction. Copy Windows's behaviour, and read 16 bytes at a time. If we get a short reply, assume that there's a hardware bottleneck, and shrink our read size to match. For this purpose, use the algorithm in the DisplayPort 1.2 spec, in the hopes that it'll be closest to what Windows does. Also provide an unsafe module parameter for testing smaller transfer sizes, in case there are sinks out there that cannot work with Windows. Note also that despite the previous comment in drm_dp_i2c_xfer, this speeds up native DP EDID reads; Ville Syrjälä <ville.syrjala@linux.intel.com> found the following changes in his testing: Device under test: old -> with this patch DP->DVI (OUI 001cf8): 40ms -> 35ms DP->VGA (OUI 0022b9): 45ms -> 38ms Zotac DP->2xHDMI: 25ms -> 4ms Asus PB278 monitor: 22ms -> 3ms A back of the envelope calculation shows that peak theoretical transfer rate for 1 byte reads is around 60 kbit/s; with 16 byte reads, this increases to around 500 kbit/s, which explains the increase in speed. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55228 Tested-by: Aidan Marks <aidanamarks@gmail.com> (v3) Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-01drm/dp: add drm_dp_link_power_down() helperRob Clark1-0/+31
We had _power_up(), but drivers also need to be able to power down. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2014-12-09drm/dp: retry AUX transactions 32 times (v1.1)Dave Airlie1-3/+4
At least on two MST devices I've tested with, when they are link training downstream, they are totally unable to handle aux ch msgs, so they defer like nuts. I tried 16, it wasn't enough, 32 seems better. This fixes one Dell 4k monitor and one of the MST hubs. v1.1: fixup comment (Tom). Acked-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-11-05drm/dp: Add counters in the drm_dp_aux struct for I2C NACKs and DEFERsTodd Previte1-0/+2
These counters are used for Displayort compliance testing to detect error conditions when executing tests 4.2.2.4 and 4.2.2.5 in the Displayport Link CTS specificaiton. They determine whether to use the preferred/requested mode or the failsafe mode during these tests. V2: - Addressed previous review feedback - Updated commit message - Changed from uint8_t to uint32_t Cc: dri-devel@lists.freedesktop.org Signed-off-by: Todd Previte <tprevite@gmail.com> [danvet: s/uint32_t/unsigned/ for clearer intent. Also drop the i915 from the subject, it's all core stuff.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-23drm/dp-helper: Move the legacy helpers to gma500Daniel Vetter1-192/+0
Except for gma500 all drivers are converted to the new style helpers, which have much better abstraction of the underlying hw protocols and already much more helper functions (including the entire mst library) on top of them. Since no one seems to work on converting gma500 let's just move the code away so that new drivers don't end up accidentally using this. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Reviewed-by: Alan Cox <alan@linux.intel.com> [danvet: Add __deprecated as requested by Alan. Also add a short FIXME comment and drop the EXPORT_SYMBOL which is no longer needed.] Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2014-06-05drm/dp: add a hw mutex around the transfer functions. (v2)Dave Airlie1-7/+14
This should avoid races between connector probing and HPD irqs in the future, currently mode_config.mutex blocks this possibility. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-02drm/dp-helper: Deprecate old i2c-over-dp_aux heleprsDaniel Vetter1-0/+4
Only gma500 is still using this, once that's converted we can kill all this code. If that conversion doesn't happen soonish I think we should just move this helper code into the gma500 driver itself to avoid abuse from new drivers. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-29drm/dp: Fix typo in commentThierry Reding1-1/+1
Replace an occurrence of "adapater" with "adapter". Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-08drm/dp/i2c: Update comments about common i2c over dp assumptions (v3)Alex Deucher1-1/+3
If you are using the common dp over i2c functionality, it is asumed that the aux transfer function does not modify the any of the msg structure other than the reply field. Doing so breaks the logic in the common code. v2: update struct drm_dp_aux comments about assumptions v3 (chk): rebased on upstream changes Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Thierry Reding <treding@nvidia.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-04-08drm/dp/i2c: send bare addresses to properly reset i2c connections (v4)Alex Deucher1-19/+32
We need bare address packets at the start and end of each i2c over aux transaction to properly reset the connection between transactions. This mirrors what the existing dp i2c over aux algo currently does. This fixes EDID fetches on certain monitors especially with dp bridges. v2: update as per Ville's comments - Set buffer to NULL for zero sized packets - abort the entre transaction if one of the messages fails v3: drop leftover debugging code v4: integrate Thierry's comments - add comments about address only transactions - switch back to i and j Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Thierry Reding <treding@nvidia.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-04-05drm/dp_helper: don't return EPROTO for defers (v2)Dave Airlie1-4/+4
If we get a msg.reply of REPLY_DEFER, we also get an err of 0 so we fail reads with 0 < size and return -EPROTO instead of trying again. v2: same fix in i2c code. Found writing MST support. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-04-03Merge tag 'drm-intel-next-2014-03-21' of ↵Dave Airlie1-1/+2
git://anongit.freedesktop.org/drm-intel into drm-next - Inherit/reuse firmwar framebuffers (for real this time) from Jesse, less flicker for fastbooting. - More flexible cloning for hdmi (Ville). - Some PPGTT fixes from Ben. - Ring init fixes from Naresh Kumar. - set_cache_level regression fixes for the vma conversion from Ville&Chris. - Conversion to the new dp aux helpers (Jani). - Unification of runtime pm with pc8 support from Paulo, prep work for runtime pm on other platforms than HSW. - Larger cursor sizes (Sagar Kamble). - Piles of improvements and fixes all over, as usual. * tag 'drm-intel-next-2014-03-21' of git://anongit.freedesktop.org/drm-intel: (75 commits) drm/i915: Include a note about the dangers of I915_READ64/I915_WRITE64 drm/i915/sdvo: fix questionable return value check drm/i915: Fix unsafe loop iteration over vma whilst unbinding them drm/i915: Enabling 128x128 and 256x256 ARGB Cursor Support drm/i915: Print how many objects are shared in per-process stats drm/i915: Per-process stats work better when evaluated per-process drm/i915: remove rps local variables drm/i915: Remove extraneous MMIO for RPS drm/i915: Rename and comment all the RPS *stuff* drm/i915: Store the HW min frequency as min_freq drm/i915: Fix coding style for RPS drm/i915: Reorganize the overclock code drm/i915: init pm.suspended earlier drm/i915: update the PC8 and runtime PM documentation drm/i915: rename __hsw_do_{en, dis}able_pc8 drm/i915: kill struct i915_package_c8 drm/i915: move pc8.irqs_disabled to pm.irqs_disabled drm/i915: remove dev_priv->pc8.enabled drm/i915: don't get/put PC8 when getting/putting power wells drm/i915: make intel_aux_display_runtime_get get runtime PM, not PC8 ... Conflicts: drivers/gpu/drm/i915/intel_display.c drivers/gpu/drm/i915/intel_dp.c
2014-03-25drm/dp: make aux retries less chattyAlex Deucher1-2/+2
Switch to debug only to avoid flooding the logs. This mirrors the behavior in some other drivers. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Christian König <christian.koenig@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-01 03:25:44 +0000