summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/bridge
AgeCommit message (Collapse)AuthorFilesLines
2022-06-20drm: Drop drm_edid.h from drm_crtc.hVille Syrjälä6-0/+6
drm_crtc.h has no need for drm_edid.h, so don't include it. Avoids useless rebuilds of the entire universe when touching drm_edid.h. Quite a few placs do currently depend on drm_edid.h without actually including it directly. All of those need to be fixed up. v2: Fix up i915 and msm some more v3: Fix alphabetical ordering (Sam) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220614090245.30283-1-ville.syrjala@linux.intel.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com>
2022-06-20drm/bridge: ti-sn65dsi83: Allow GPIO operations to sleepAlexander Stein1-2/+2
There is no need to require non-sleeping GPIO access. Silence the WARN_ON() if GPIO is using e.g. I2C expanders. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220614095835.1398708-2-alexander.stein@ew.tq-group.com Reviewed-by: Robert Foss <robert.foss@linaro.org>
2022-06-20drm/bridge: ti-sn65dsi83: add more dev_err_probeAlexander Stein1-2/+2
Add more warning/debug messages during probe. E.g. a single -EPROBE_DEFER might have several causes, these messages help finding the origin. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220614095835.1398708-1-alexander.stein@ew.tq-group.com Reviewed-by: Robert Foss <robert.foss@linaro.org>
2022-06-20drm/bridge/tc358775: Fix DSI clock division for vsync delay calculationJiri Vanek1-1/+1
Use the same PCLK divide option (divide DSI clock to generate pixel clock) which is set to LVDS Configuration Register (LVCFG) also for a VSync delay calculation. Without this change an auxiliary variable could underflow during the calculation for some dual-link LVDS panels and then calculated VSync delay is wrong. This leads to a shifted picture on a panel. Tested-by: Jiri Vanek <jirivanek1@gmail.com> Signed-off-by: Jiri Vanek <jirivanek1@gmail.com> Reviewed-by: Vinay Simha BN <simhavcs@gmail.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220615222221.1501-3-jirivanek1@gmail.com
2022-06-20drm/bridge/tc358775: Return before displaying inappropriate error messageJiri Vanek1-0/+1
Function for reading from i2c device register displays error message even if reading ends correctly. Add return to avoid falling through into the fail label. Signed-off-by: Jiri Vanek <jirivanek1@gmail.com> Reviewed-by: Vinay Simha BN <simhavcs@gmail.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220615222221.1501-2-jirivanek1@gmail.com
2022-06-20drm/bridge: imx: Add LDB support for i.MX8qmLiu Ying3-0/+599
This patch adds a drm bridge driver for i.MX8qm LVDS display bridge(LDB) which is officially named as pixel mapper. The LDB has two channels. Each of them supports up to 30bpp parallel input color format and can map the input to VESA or JEIDA standards. The two channels can be used simultaneously, either in dual mode or split mode. In dual mode, the two channels output identical data. In split mode, channel0 outputs odd pixels and channel1 outputs even pixels. This patch supports the LDB single mode and split mode. Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1 Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Liu Ying <victor.liu@nxp.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-13-victor.liu@nxp.com
2022-06-20drm/bridge: imx: Add LDB support for i.MX8qxpLiu Ying3-0/+734
This patch adds a drm bridge driver for i.MX8qxp LVDS display bridge(LDB) which is officially named as pixel mapper. The LDB has two channels. Each of them supports up to 24bpp parallel input color format and can map the input to VESA or JEIDA standards. The two channels cannot be used simultaneously, that is to say, the user should pick one of them to use. Two LDB channels from two LDB instances can work together in LDB split mode to support a dual link LVDS display. The channel indexes have to be different. Channel0 outputs odd pixels and channel1 outputs even pixels. This patch supports the LDB single mode and split mode. Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1 Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Liu Ying <victor.liu@nxp.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-12-victor.liu@nxp.com
2022-06-20drm/bridge: imx: Add LDB driver helper supportLiu Ying2-0/+316
This patch adds a helper to support LDB drm bridge drivers for i.MX SoCs. Helper functions supported by this helper should implement common logics for all LDB modules embedded in i.MX SoCs. Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1 Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Liu Ying <victor.liu@nxp.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-10-victor.liu@nxp.com
2022-06-20drm/bridge: imx: Add i.MX8qxp pixel link to DPI supportLiu Ying3-0/+496
This patch adds a drm bridge driver for i.MX8qxp pixel link to display pixel interface(PXL2DPI). The PXL2DPI interfaces the pixel link 36-bit data output and the DSI controller’s MIPI-DPI 24-bit data input, and inputs of LVDS Display Bridge(LDB) module used in LVDS mode, to remap the pixel color codings between those modules. The PXL2DPI is purely combinatorial. Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1 Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Liu Ying <victor.liu@nxp.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-9-victor.liu@nxp.com
2022-06-20drm/bridge: imx: Add i.MX8qm/qxp display pixel link supportLiu Ying3-0/+439
This patch adds a drm bridge driver for i.MX8qm/qxp display pixel link. The pixel link forms a standard asynchronous linkage between pixel sources(display controller or camera module) and pixel consumers(imaging or displays). It consists of two distinct functions, a pixel transfer function and a control interface. Reviewed-by: Robert Foss <robert.foss@linaro.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1 Signed-off-by: Liu Ying <victor.liu@nxp.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-7-victor.liu@nxp.com
2022-06-20drm/bridge: imx: Add i.MX8qm/qxp pixel combiner supportLiu Ying5-0/+460
This patch adds a drm bridge driver for i.MX8qm/qxp pixel combiner. The pixel combiner takes two output streams from a single display controller and manipulates the two streams to support a number of modes(bypass, pixel combine, YUV444 to YUV422, split_RGB) configured as either one screen, two screens, or virtual screens. The pixel combiner is also responsible for generating some of the control signals for the pixel link output channel. For now, the driver only supports the bypass mode. Reviewed-by: Robert Foss <robert.foss@linaro.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1 Signed-off-by: Liu Ying <victor.liu@nxp.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-5-victor.liu@nxp.com
2022-06-20drm/bridge: anx7625: Use DPI bus typeXin Ji1-4/+4
As V4L2_FWNODE_BUS_TYPE_PARALLEL not properly descript for DPI interface, this patch use new defined V4L2_FWNODE_BUS_TYPE_DPI for it. Fixes: fd0310b6fe7d ("drm/bridge: anx7625: add MIPI DPI input feature") Signed-off-by: Xin Ji <xji@analogixsemi.com> Tested-by: Chen-Yu Tsai <wenst@chromium.org> Acked-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220422084720.959271-4-xji@analogixsemi.com
2022-06-20Merge drm/drm-next into drm-misc-nextThomas Zimmermann2-4/+39
Backmerging to get new regmap APIs of v5.19-rc1. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2022-06-15Merge tag 'drm-misc-next-2022-06-08' of ↵Daniel Vetter13-134/+668
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.20: UAPI Changes: * connector: export bpc limits in debugfs * dma-buf: Print buffer name in debugfs Cross-subsystem Changes: * dma-buf: Improve dma-fence handling; Cleanups * fbdev: Device-unregistering fixes Core Changes: * client: Only use driver-validated modes to avoid blank screen * dp-aux: Make probing more reliable; Small fixes * edit: CEA data-block iterators; Introduce struct drm_edid; Many cleanups * gem: Don't use framebuffer format's non-exising color planes * probe-helper: Use 640x480 as DisplayPort fallback; Refactoring * scheduler: Don't kill jobs in interrupt context Driver Changes: * amdgpu: Use atomic fence helpers in DM; Fix VRAM address calculation; Export CRTC bpc settings via debugfs * bridge: Add TI-DLPC3433; anx7625: Fixes; fy07024di26a30d: Optional GPIO reset; icn6211: Cleanups; ldb: Add reg and reg-name properties to bindings, Kconfig fixes; lt9611: Fix display sensing; lt9611uxc: Fixes; nwl-dsi: Fixes; ps8640: Cleanups; st7735r: Fixes; tc358767: DSI/DPI refactoring and DSI-to-eDP support, Fixes; ti-sn65dsi83: Fixes; * gma500: Cleanup connector I2C handling * hyperv: Unify VRAM allocation of Gen1 and Gen2 * i915: export CRTC bpc settings via debugfs * meson: Support YUV422 output; Refcount fixes * mgag200: Support damage clipping; Support gamma handling; Protect concurrent HW access; Fixes to connector; Store model-specific limits in device-info structure; Cleanups * nouveau: Fixes and Cleanups * panel: Kconfig fixes * panfrost: Valhall support * r128: Fix bit-shift overflow * rockchip: Locking fixes in error path; Minor cleanups * ssd130x: Fix built-in linkage * ttm: Cleanups * udl; Always advertize VGA connector * fbdev/vesa: Support COMPILE_TEST Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YqBtumw05JZDEZE2@linux-uq9g
2022-06-15drm/bridge: it6505: Add missing CRYPTO_HASH dependencyZheng Bin1-0/+2
The driver uses crypto hash functions so it needs to select CRYPTO_HASH. This fixes build errors: drivers/gpu/drm/bridge/ite-it6505.o: in function `it6505_hdcp_wait_ksv_list': ite-it6505.c:(.text+0x4c26): undefined reference to `crypto_alloc_shash' ite-it6505.c:(.text+0x4c6d): undefined reference to `crypto_shash_digest' ite-it6505.c:(.text+0x4c7d): undefined reference to `crypto_destroy_tfm' ite-it6505.c:(.text+0x4d69): undefined reference to `crypto_destroy_tfm' Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver") Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220613150653.1310029-1-zhengbin13@huawei.com
2022-06-15drm/bridge: anx7625: Zero error variable when panel bridge not presentNícolas F. R. A. Prado1-1/+3
While parsing the DT, the anx7625 driver checks for the presence of a panel bridge on endpoint 1. If it is missing, pdata->panel_bridge stores the error pointer and the function returns successfully without first cleaning that variable. This is an issue since other functions later check for the presence of a panel bridge by testing the trueness of that variable. In order to ensure proper behavior, zero out pdata->panel_bridge before returning when no panel bridge is found. Fixes: 9e82ea0fb1df ("drm/bridge: anx7625: switch to devm_drm_of_get_bridge") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220613163705.1531721-1-nfraprado@collabora.com
2022-06-13ASoC: hdmi-codec: Update to modern DAI terminologyMark Brown2-3/+4
As part of retiring the old defines used to specify DAI formats update the hdmi_codec driver to use the modern names, including the variables in the struct hdmi_codec_daifmt exported to the DRM drivers. In updating this I did note that the only use of this information in DRM drivers is to reject clock provider settings, thinking about what this hardware is doing I rather suspect that there might not be any hardware out there which needs the configuration so it may be worth considering just having hdmi-codec support only clock consumer. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220602103029.3498791-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-12drm/bridge: tc358775: Fix drm_of_get_data_lanes_count_ep conversionMarek Vasut1-1/+1
Initialize dsi_lanes to -1, so that in case the endpoint is missing, probe would fail as it did before the conversion, instead of depending on uninitialized variable and thus undefined behavior. Fixes: 56426faa1492 ("drm/bridge: tc358775: Convert to drm_of_get_data_lanes_count_ep") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> To: dri-devel@lists.freedesktop.org Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220612132152.91052-2-marex@denx.de
2022-06-12drm/bridge: ti-sn65dsi83: Convert to drm_of_get_data_lanes_countMarek Vasut1-1/+1
Convert driver to use this new helper to standardize OF "data-lanes" parsing. Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> To: dri-devel@lists.freedesktop.org Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220612102947.13912-1-marex@denx.de
2022-06-12drm/bridge: ti-sn65dsi83: Do not cache dsi_lanes and host twiceMarek Vasut1-42/+22
The DSI lane count can be accessed via the dsi device pointer, make use of that. The DSI host pointer is only used in sn65dsi83_host_attach(), move the code around so that the host does not have to be cached in the driver private data. This simplifies the code further. No functional change. This has the added bonus that lt9211, tc358767, sn65dsi83 now use very similar *_mipi_dsi_host_attach() which is ripe for deduplication. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220612102918.13874-1-marex@denx.de
2022-06-12drm/bridge: ti-sn65dsi86: Convert to drm_of_get_data_lanes_countMarek Vasut1-2/+2
Convert driver to use this new helper to standardize OF "data-lanes" parsing. Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> To: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-9-marex@denx.de
2022-06-12drm/bridge: tc358775: Convert to drm_of_get_data_lanes_count_epMarek Vasut1-16/+5
Convert driver to use this new helper to standardize OF "data-lanes" parsing. Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> To: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-7-marex@denx.de
2022-06-12drm/bridge: tc358767: Convert to drm_of_get_data_lanes_countMarek Vasut1-4/+4
Convert driver to use this new helper to standardize OF "data-lanes" parsing. Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> To: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-6-marex@denx.de
2022-06-12drm/bridge: lt9211: Convert to drm_of_get_data_lanes_countMarek Vasut1-3/+3
Convert driver to use this new helper to standardize OF "data-lanes" parsing. Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> To: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-5-marex@denx.de
2022-06-12drm/bridge: lt8912: Convert to drm_of_get_data_lanes_count_epMarek Vasut1-7/+2
Convert driver to use this new helper to standardize OF "data-lanes" parsing. Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Adrien Grassein <adrien.grassein@gmail.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> To: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-4-marex@denx.de
2022-06-12drm/bridge: icn6211: Convert to drm_of_get_data_lanes_count_epMarek Vasut1-7/+4
Convert driver to use this new helper to standardize OF "data-lanes" parsing. Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> To: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-3-marex@denx.de
2022-06-12drm/bridge: anx7625: Convert to drm_of_get_data_lanes_countMarek Vasut1-4/+4
Convert driver to use this new helper to standardize OF "data-lanes" parsing. Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Xin Ji <xji@analogixsemi.com> To: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-2-marex@denx.de
2022-06-10drm: adv7511: override i2c address of cec before accessing itAntonio Borneo1-3/+4
Commit 680532c50bca ("drm: adv7511: Add support for i2c_new_secondary_device") allows a device tree node to override the default addresses of the secondary i2c devices. This is useful for solving address conflicts on the i2c bus. In adv7511_init_cec_regmap() the new i2c address of cec device is read from device tree and immediately accessed, well before it is written in the proper register to override the default address. This can cause an i2c error during probe and a consequent probe failure. Once the new i2c address is read from the device tree, override the default address before any attempt to access the cec. Tested with adv7533 and stm32mp157f. Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Fixes: 680532c50bca ("drm: adv7511: Add support for i2c_new_secondary_device") Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220607213144.427177-1-antonio.borneo@foss.st.com
2022-06-08Merge v5.19-rc1 into drm-misc-fixesMaxime Ripard42-510/+3593
Let's kick-off the start of the 5.19 fix cycle Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-06-07drm/bridge: lt9611uxc: Cancel only driver's workBjorn Andersson1-1/+1
During device remove care needs to be taken that no work is pending before it removes the underlying DRM bridge etc, but this can be done on the specific work rather than waiting for the flush of the system-wide workqueue. Fixes: bc6fa8676ebb ("drm/bridge/lontium-lt9611uxc: move HPD notification out of IRQ handler") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220601233818.1877963-1-bjorn.andersson@linaro.org
2022-06-06drm/bridge: analogix_dp: Support PSR-exit to disable transitionBrian Norris1-4/+38
Most eDP panel functions only work correctly when the panel is not in self-refresh. In particular, analogix_dp_bridge_disable() tends to hit AUX channel errors if the panel is in self-refresh. Given the above, it appears that so far, this driver assumes that we are never in self-refresh when it comes time to fully disable the bridge. Prior to commit 846c7dfc1193 ("drm/atomic: Try to preserve the crtc enabled state in drm_atomic_remove_fb, v2."), this tended to be true, because we would automatically disable the pipe when framebuffers were removed, and so we'd typically disable the bridge shortly after the last display activity. However, that is not guaranteed: an idle (self-refresh) display pipe may be disabled, e.g., when switching CRTCs. We need to exit PSR first. Stable notes: this is definitely a bugfix, and the bug has likely existed in some form for quite a while. It may predate the "PSR helpers" refactor, but the code looked very different before that, and it's probably not worth rewriting the fix. Cc: <stable@vger.kernel.org> Fixes: 6c836d965bad ("drm/rockchip: Use the helpers for PSR") Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220228122522.v2.1.I161904be17ba14526f78536ccd78b85818449b51@changeid
2022-06-03drm: bridge: Add TI DLPC3433 DSI to DMD bridgeJagan Teki3-0/+434
TI DLPC3433 is a MIPI DSI based display controller bridge for processing high resolution DMD based projectors. It has a flexible configuration of MIPI DSI and DPI signal input that produces a DMD output in RGB565, RGB666, RGB888 formats. It supports upto 720p resolution with 60 and 120 Hz refresh rates. Add bridge driver for it. Signed-off-by: Christopher Vollo <chris@renewoutreach.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220603140349.3563612-2-jagan@amarulasolutions.com
2022-06-02drm/bridge: parade-ps8640: Handle DP AUX more properlyDouglas Anderson1-28/+46
While it works, for the most part, to assume that the panel has finished probing when devm_of_dp_aux_populate_ep_devices() returns, it's a bit fragile. This is talked about at length in commit a1e3667a9835 ("drm/bridge: ti-sn65dsi86: Promote the AUX channel to its own sub-dev"). When reviewing the ps8640 code, I managed to convince myself that it was OK not to worry about it there and that maybe it wasn't really _that_ fragile. However, it turns out that it really is. Simply hardcoding panel_edp_probe() to return -EPROBE_DEFER was enough to put the boot process into an infinite loop. I believe this manages to trip the same issues that we used to trip with the main MSM code where something about our actions trigger Linux to re-probe previously deferred devices right away and each time we try again we re-trigger Linux to re-probe. Let's fix this using the callback introduced in the patch ("drm/dp: Callbacks to make it easier for drivers to use DP AUX bus properly"). When using the new callback, we have to be a little careful. The probe_done() callback is no longer always called in the context of our probe routine. That means we can't rely on being able to return -EPROBE_DEFER from it. We re-jigger the order of things a bit to account for that. With this change, the device still boots (though obviously the panel doesn't come up) if I force panel-edp to always return -EPROBE_DEFER. If I fake it and make the panel probe exactly once it also works. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220510122726.v3.4.Ia6324ebc848cd40b4dbd3ad3289a7ffb5c197779@changeid
2022-05-26drm: bridge: icn6211: Adjust clock phase using SYS_CTRL_1Jonathan Liu1-2/+16
The code from [1] sets SYS_CTRL_1 to different values depending on the desired clock phase (0, 1/4, 1/2 or 3/4). A clock phase of 0 aligns the positive edge of the clock with the pixel data while other values delay the clock by a fraction of the clock period. A clock phase of 1/2 aligns the negative edge of the clock with the pixel data. The driver currently hard codes SYS_CTRL_1 to 0x88 which corresponds to aligning the positive edge of the clock with the pixel data. This won't work correctly for panels that require aligning the negative edge of the clock with the pixel data. Adjust the clock phase to 0 if DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE is present in bus_flags, otherwise adjust the clock phase to 1/2 as appropriate for DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE. [1] https://github.com/tdjastrzebski/ICN6211-Configurator Signed-off-by: Jonathan Liu <net147@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220523130144.444225-1-net147@gmail.com
2022-05-26drm: bridge: adv7511: Move CEC definitions to adv7511_cec.cFabio Estevam2-12/+12
ADV7511_REG_CEC_RX_FRAME_HDR[] and ADV7511_REG_CEC_RX_FRAME_LEN[] are only used inside adv7511_cec.c. Move their definitions to this file to avoid the following build warnings when CONFIG_DRM_I2C_ADV7511_CEC is not selected: drivers/gpu/drm/bridge/adv7511/adv7511.h:229:17: warning: 'ADV7511_REG_CEC_RX_FRAME_HDR' defined but not used [-Wunused-const-variable=] drivers/gpu/drm/bridge/adv7511/adv7511.h:235:17: warning: 'ADV7511_REG_CEC_RX_FRAME_LEN' defined but not used [-Wunused-const-variable=] Reported-by: kernel test robot <lkp@intel.com> Fixes: ab0af093bf90 ("drm: bridge: adv7511: use non-legacy mode for CEC RX") Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220525215316.1133057-1-festevam@gmail.com
2022-05-25Merge tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drmLinus Torvalds42-510/+3593
Pull drm updates from Dave Airlie: "Intel have enabled DG2 on certain SKUs for laptops, AMD has started some new GPU support, msm has user allocated VA controls dma-buf: - add dma_resv_replace_fences - add dma_resv_get_singleton - make dma_excl_fence private core: - EDID parser refactorings - switch drivers to drm_mode_copy/duplicate - DRM managed mutex initialization display-helper: - put HDMI, SCDC, HDCP, DSC and DP into new module gem: - rework fence handling ttm: - rework bulk move handling - add common debugfs for resource managers - convert to kvcalloc format helpers: - support monochrome formats - RGB888, RGB565 to XRGB8888 conversions fbdev: - cfb/sys_imageblit fixes - pagelist corruption fix - create offb platform device - deferred io improvements sysfb: - Kconfig rework - support for VESA mode selection bridge: - conversions to devm_drm_of_get_bridge - conversions to panel_bridge - analogix_dp - autosuspend support - it66121 - audio support - tc358767 - DSI to DPI support - icn6211 - PLL/I2C fixes, DT property - adv7611 - enable DRM_BRIDGE_OP_HPD - anx7625 - fill ELD if no monitor - dw_hdmi - add audio support - lontium LT9211 support, i.MXMP LDB - it6505: Kconfig fix, DPCD set power fix - adv7511 - CEC support for ADV7535 panel: - ltk035c5444t, B133UAN01, NV3052C panel support - DataImage FG040346DSSWBG04 support - st7735r - DT bindings fix - ssd130x - fixes i915: - DG2 laptop PCI-IDs ("motherboard down") - Initial RPL-P PCI IDs - compute engine ABI - DG2 Tile4 support - DG2 CCS clear color compression support - DG2 render/media compression formats support - ATS-M platform info - RPL-S PCI IDs added - Bump ADL-P DMC version to v2.16 - Support static DRRS - Support multiple eDP/LVDS native mode refresh rates - DP HDR support for HSW+ - Lots of display refactoring + fixes - GuC hwconfig support and query - sysfs support for multi-tile - fdinfo per-client gpu utilisation - add geometry subslices query - fix prime mmap with LMEM - fix vm open count and remove vma refcounts - contiguous allocation fixes - steered register write support - small PCI BAR enablement - GuC error capture support - sunset igpu legacy mmap support for newer devices - GuC version 70.1.1 support amdgpu: - Initial SoC21 support - SMU 13.x enablement - SMU 13.0.4 support - ttm_eu cleanups - USB-C, GPUVM updates - TMZ fixes for RV - RAS support for VCN - PM sysfs code cleanup - DC FP rework - extend CG/PG flags to 64-bit - SI dpm lockdep fix - runtime PM fixes amdkfd: - RAS/SVM fixes - TLB flush fixes - CRIU GWS support - ignore bogus MEC signals more efficiently msm: - Fourcc modifier for tiled but not compressed layouts - Support for userspace allocated IOVA (GPU virtual address) - DPU: DSC (Display Stream Compression) support - DP: eDP support - DP: conversion to use drm_bridge and drm_bridge_connector - Merge DPU1 and MDP5 MDSS driver - DPU: writeback support nouveau: - make some structures static - make some variables static - switch to drm_gem_plane_helper_prepare_fb radeon: - misc fixes/cleanups mxsfb: - rework crtc mode setting - LCDIF CRC support etnaviv: - fencing improvements - fix address space collisions - cleanup MMU reference handling gma500: - GEM/GTT improvements - connector handling fixes komeda: - switch to plane reset helper mediatek: - MIPI DSI improvements omapdrm: - GEM improvements qxl: - aarch64 support vc4: - add a CL submission tracepoint - HDMI YUV support - HDMI/clock improvements - drop is_hdmi caching virtio: - remove restriction of non-zero blob types vmwgfx: - support for cursormob and cursorbypass 4 - fence improvements tidss: - reset DISPC on startup solomon: - SPI support - DT improvements sun4i: - allwinner D1 support - drop is_hdmi caching imx: - use swap() instead of open-coding - use devm_platform_ioremap_resource - remove redunant initializations ast: - Displayport support rockchip: - Refactor IOMMU initialisation - make some structures static - replace drm_detect_hdmi_monitor with drm_display_info.is_hdmi - support swapped YUV formats, - clock improvements - rk3568 support - VOP2 support mediatek: - MT8186 support tegra: - debugabillity improvements" * tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drm: (1740 commits) drm/i915/dsi: fix VBT send packet port selection for ICL+ drm/i915/uc: Fix undefined behavior due to shift overflowing the constant drm/i915/reg: fix undefined behavior due to shift overflowing the constant drm/i915/gt: Fix use of static in macro mismatch drm/i915/audio: fix audio code enable/disable pipe logging drm/i915: Fix CFI violation with show_dynamic_id() drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c drm/i915/gt: Fix build error without CONFIG_PM drm/msm/dpu: handle pm_runtime_get_sync() errors in bind path drm/msm/dpu: add DRM_MODE_ROTATE_180 back to supported rotations drm/msm: don't free the IRQ if it was not requested drm/msm/dpu: limit writeback modes according to max_linewidth drm/amd: Don't reset dGPUs if the system is going to s2idle drm/amdgpu: Unmap legacy queue when MES is enabled drm: msm: fix possible memory leak in mdp5_crtc_cursor_set() drm/msm: Fix fb plane offset calculation drm/msm/a6xx: Fix refcount leak in a6xx_gpu_init drm/msm/dsi: don't powerup at modeset time for parade-ps8640 drm/rockchip: Change register space names in vop2 dt-bindings: display: rockchip: make reg-names mandatory for VOP2 ...
2022-05-23Revert "drm/bridge: anx7625: Use DPI bus type"Robert Foss1-4/+4
This reverts commit a77c2af0994e24ee36c7ffb6dc852770bdf06fb1. This patch depends on the patches just aplied to the media tree, and will not build without them, which leaves drm-misc-next in a broken state. Let's revert the two latter patches until rc1 has been branched, and rc1 has been backmerged into drm-misc-next. Signed-off-by: Robert Foss <robert.foss@linaro.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220523161520.354687-1-robert.foss@linaro.org
2022-05-23drm/bridge: lt9611: Use both bits for HDMI sensingJohn Stultz1-1/+1
In commit 19cf41b64e3b ("lontium-lt9611: check a different register bit for HDMI sensing"), the bit flag used to detect HDMI cable connect was switched from BIT(2) to BIT(0) to improve compatibility with some monitors that didn't seem to set BIT(2). However, with that change, I've seen occasional issues where the detection failed, because BIT(2) was set, but not BIT(0). Unfortunately, as I understand it, the bits and their function was never clearly documented. So lets instead check both (BIT(2) | BIT(0)) when checking the register. Cc: Yongqin Liu <yongqin.liu@linaro.org> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: Peter Collingbourne <pcc@google.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Robert Foss <robert.foss@linaro.org> Cc: kernel-team@android.com Fixes: 19cf41b64e3b ("lontium-lt9611: check a different register bit for HDMI sensing") Signed-off-by: John Stultz <jstultz@google.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220511012612.3297577-2-jstultz@google.com
2022-05-23drm/bridge: lt9611: Consolidate detection logicJohn Stultz1-14/+8
This patch simply consolidates the duplicated detection functionality in the driver. Cc: Yongqin Liu <yongqin.liu@linaro.org> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: Peter Collingbourne <pcc@google.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Robert Foss <robert.foss@linaro.org> Cc: kernel-team@android.com Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: John Stultz <jstultz@google.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220511012612.3297577-1-jstultz@google.com
2022-05-23drm/bridge: anx7625: Add missing of_node_put for endpointMarek Vasut1-0/+1
Add of_node_put call on the endpoint node after it is not needed. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Xin Ji <xji@analogixsemi.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220519112337.62198-1-marex@denx.de
2022-05-23drm/bridge: ti-sn65dsi83: Handle dsi_lanes == 0 as invalidMarek Vasut1-1/+1
Handle empty data-lanes = < >; property, which translates to dsi_lanes = 0 as invalid. Fixes: ceb515ba29ba6 ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Marek Vasut <marex@denx.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220518233844.248504-1-marex@denx.de
2022-05-21drm/bridge: tc358767: Make sure Refclk clock are enabledMarek Vasut1-7/+25
The Refclk may be supplied by SoC clock output instead of crystal oscillator, make sure the clock are enabled before any other action is performed with the bridge chip, otherwise it may either fail to operate at all, or miss reset GPIO toggle. Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Fixes: 7caff0fc4296e ("drm/bridge: tc358767: Add DPI to eDP bridge driver") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Marek Vasut <marex@denx.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220520121543.11550-1-marex@denx.de
2022-05-21drm/bridge: tc358767: Report DSI-to-(e)DP as supportedMarek Vasut1-4/+1
The DSI-to-e(DP) mode is now supported, update the driver comment to reflect this. No functional change. Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Fixes: 3080c21a043ab ("drm/bridge: tc358767: Add DSI-to-(e)DP mode support") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Marek Vasut <marex@denx.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220519095137.11896-2-marex@denx.de
2022-05-21drm/bridge: tc358767: Handle dsi_lanes == 0 as invalidMarek Vasut1-1/+1
Handle empty data-lanes = < >; property, which translates to dsi_lanes = 0 as invalid. Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Fixes: bbfd3190b6562 ("drm/bridge: tc358767: Add DSI-to-DPI mode support") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Marek Vasut <marex@denx.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220519095137.11896-1-marex@denx.de
2022-05-21drm/bridge: ti-sn65dsi83: Handle dsi_lanes == 0 as invalidMarek Vasut1-1/+1
Handle empty data-lanes = < >; property, which translates to dsi_lanes = 0 as invalid. Fixes: ceb515ba29ba6 ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Marek Vasut <marex@denx.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220518233844.248504-1-marex@denx.de
2022-05-17drm/bridge: anx7625: Use DPI bus typeXin Ji1-4/+4
As V4L2_FWNODE_BUS_TYPE_PARALLEL not properly descript for DPI interface, this patch use new defined V4L2_FWNODE_BUS_TYPE_DPI for it. Fixes: fd0310b6fe7d ("drm/bridge: anx7625: add MIPI DPI input feature") Signed-off-by: Xin Ji <xji@analogixsemi.com> Tested-by: Chen-Yu Tsai <wenst@chromium.org> Acked-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220422084720.959271-4-xji@analogixsemi.com
2022-05-16drm: bridge: DRM_FSL_LDB should depend on ARCH_MXCGeert Uytterhoeven1-0/+1
The Freescale i.MX8MP LDB bridge is only present on Freescale i.MX8MP SoCs. Hence add a dependency on ARCH_MXC, to prevent asking the user about this driver when configuring a kernel without i.MX SoC support. Fixes: 463db5c2ed4aed01 ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/449e08ca791a3ca308de5477c1bdc1f6eb1b34e7.1652104211.git.geert+renesas@glider.be
2022-05-16drm: bridge: icn6211: Register macro clean upMarek Vasut1-13/+11
Drop two unused register macros, ICN6211_MAX_REGISTER and MIPI_ATE_STATUS_1, neither of which is used and where the later should be specified using macro MIPI_ATE_STATUS(1) instead. Drop the _(n) underscore and keep only the (n) part of register macros. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Mark Brown <broonie@kernel.org> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220430025020.640277-1-marex@denx.de
2022-05-12drm/bridge: tc358767: Add DSI-to-(e)DP mode supportMarek Vasut1-10/+30
Implement DSI-to-e(DP) mode, which is a mix of currently supported DSI-to-DPI and DPI-to-(e)DP modes. The input side is configured as either DSI or DPI, the DP AUX channel is registered for both input side options, and the DSI host is attached for both DPI and (e)DP output side options. One notable detail is that the DSI-to-(e)DP mode requires the Pixel PLL to be always enabled, which is not needed for DPI-to-(e)DP mode which gets the matching clock direct from DPI Pixel Clock instead. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Marek Vasut <marex@denx.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220429205644.245480-2-marex@denx.de
2022-05-12drm/bridge: tc358767: Factor out DSI and DPI RX enablementMarek Vasut1-41/+53
Factor out register programming to configure the chip video RX side for reception of video data from DSI or DPI. This is particularly useful in the (e)DP output mode, where the video data can be received from either DPI or DSI. While only the former is supported in (e)DP output mode so far, this patch is added in preparation for addition of the later. There is a change in the order or register programming in case of the DSI-to-DPI mode. The DSI RX side is now programmed and enabled all in one place after the output mode has been configured. Before this change, the DSI RX has been programmed before the output mode has been set and only enabled afterward. The order makes no difference however, since the DSI RX is only enabled at the end either way. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Marek Vasut <marex@denx.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220429205644.245480-1-marex@denx.de
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-18 22:35:19 +0000