summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/bridge
AgeCommit message (Collapse)AuthorFilesLines
2018-04-24drm/bridge: analogix_dp: Fix incorrect usage of enhanced modezain wang1-4/+2
Enhanced mode is required by the eDP 1.2 specification, and not doing it early could result in a period of time where we have a link transmitting idle packets without it. Since there is no reason to disable it, we just enable it at the beginning of link training and then keep it on all the time. Cc: Tomasz Figa <tfiga@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-10-enric.balletbo@collabora.com
2018-04-24drm/bridge: analogix_dp: Extend hpd check time to 100msLin Huang1-1/+1
There was a 1ms delay to detect the hpd signal, which is too short to detect a short pulse. This patch extends this delay to 100ms. Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: 征增 王 <wzz@rock-chips.com> Signed-off-by: Lin Huang <hl@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-9-enric.balletbo@collabora.com
2018-04-24drm/bridge: analogix_dp: Ensure edp is disabled when shutting down the panelLin Huang1-0/+11
When panel is shut down, we should make sure edp can be disabled to avoid undefined behavior. Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: Lin Huang <hl@rock-chips.com> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-8-enric.balletbo@collabora.com
2018-04-24drm/bridge: analogix_dp: Set PD_INC_BG first when powering up edp phyzain wang2-2/+11
Following the correct power up sequence: dp_pd=ff => dp_pd=7f => wait 10us => dp_pd=00 Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-7-enric.balletbo@collabora.com
2018-04-24drm/bridge: analogix_dp: Wait for HPD signal before configuring linkzain wang1-0/+11
According to DP spec v1.3 chap 3.5.1.2 Link Training, Link Policy Maker must first detect that the HPD signal is asserted high by the Downstream Device before establishing a link with it. Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-6-enric.balletbo@collabora.com
2018-04-24drm/bridge: analogix_dp: Retry bridge enable when it failedzain wang3-17/+56
When we enable bridge failed, we have to retry it, otherwise we would get the abnormal display. Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-5-enric.balletbo@collabora.com
2018-04-24drm/bridge: analogix_dp: Don't use fast link training when panel just powered upzain wang2-5/+6
Panel would reset its setting when it powers down. It would forget the last succeeded link training setting. So we can't use the last successful link training setting to do fast link training. Let's reset fast_train_enable in analogix_dp_bridge_disable(); Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-4-enric.balletbo@collabora.com
2018-04-24drm/bridge: analogix_dp: Check AUX_EN status when doing AUX transferLin Huang1-11/+14
We should check AUX_EN bit to confirm the AUX CH operation is completed. Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: Lin Huang <hl@rock-chips.com> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-3-enric.balletbo@collabora.com
2018-04-24drm/bridge: analogix_dp: Move enable video into config_video()Lin Huang1-6/+5
We need to enable video before analogix_dp_is_video_stream_on(), so we can get the right video stream status. We needed to increase the delay in the timeout loop because there is random "Timeout of video streamclk ok" message happen when debug edp panel, this time do not define in the spec. Cc: 征增 王 <wzz@rock-chips.com> Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: Lin Huang <hl@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-2-enric.balletbo@collabora.com
2018-04-23drm/bridge: Add Cadence DSI driverBoris Brezillon3-0/+1634
Add a driver for Cadence DPI -> DSI bridge. This driver only support a subset of Cadence DSI bridge capabilities. This driver has been tested/debugged in a simulated environment which explains why some of the features are missing. Here is a non-exhaustive list of missing features: * burst mode * DPHY init/configuration steps * support for additional input interfaces (SDI input) DSI commands and non-burst video mode have been tested. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Eric Anholt <eric@anholt.net> Reviewed-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180421070846.10330-1-boris.brezillon@bootlin.com
2018-04-23drm: dw-hdmi-i2s: Remove owner assignment from platform_driverFabio Estevam1-1/+0
platform_driver does not need to set the owner field, as this will be populated by the driver core. Generated by scripts/coccinelle/api/platform_no_drv_owner.cocci. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1521137057-14773-1-git-send-email-festevam@gmail.com
2018-04-20drm: bridge: Add thc63lvd1024 LVDS decoder driverJacopo Mondi3-0/+213
Add DRM bridge driver for Thine THC63LVD1024 LVDS to digital parallel output converter. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1524062429-325-3-git-send-email-jacopo+renesas@jmondi.org
2018-04-19drm/bridge/synopsys: dsi: Adopt SPDX identifiersPhilippe CORNU1-5/+1
Add SPDX identifiers to the Synopsys DesignWare MIPI DSI host controller driver. Signed-off-by: Philippe Cornu <philippe.cornu@st.com> Acked-by: Philippe Ombredanne <pombredanne@nexB.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180208145805.24762-1-philippe.cornu@st.com
2018-04-04Merge tag 'char-misc-4.17-rc1' of ↵Linus Torvalds1-3/+94
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the big set of char/misc driver patches for 4.17-rc1. There are a lot of little things in here, nothing huge, but all important to the different hardware types involved: - thunderbolt driver updates - parport updates (people still care...) - nvmem driver updates - mei updates (as always) - hwtracing driver updates - hyperv driver updates - extcon driver updates - ... and a handful of even smaller driver subsystem and individual driver updates All of these have been in linux-next with no reported issues" * tag 'char-misc-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (149 commits) hwtracing: Add HW tracing support menu intel_th: Add ACPI glue layer intel_th: Allow forcing host mode through drvdata intel_th: Pick up irq number from resources intel_th: Don't touch switch routing in host mode intel_th: Use correct method of finding hub intel_th: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate stm class: Make dummy's master/channel ranges configurable stm class: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate MAINTAINERS: Bestow upon myself the care for drivers/hwtracing hv: add SPDX license id to Kconfig hv: add SPDX license to trace Drivers: hv: vmbus: do not mark HV_PCIE as perf_device Drivers: hv: vmbus: respect what we get from hv_get_synint_state() /dev/mem: Avoid overwriting "err" in read_mem() eeprom: at24: use SPDX identifier instead of GPL boiler-plate eeprom: at24: simplify the i2c functionality checking eeprom: at24: fix a line break eeprom: at24: tweak newlines eeprom: at24: refactor at24_probe() ...
2018-03-15drm/bridge: dw-hdmi: Remove unused hdmi_enable_overflow_interrupts()Fabio Estevam1-9/+0
The cable_plugin member never receives an assignment, so it is always false, which causes hdmi_enable_overflow_interrupts() to never be called as per the logic below: if (hdmi->cable_plugin && hdmi->sink_is_hdmi) hdmi_enable_overflow_interrupts(hdmi); This has been the case since the driver was originally introduced in commit 9aaf880ed4ee ("imx-drm: Add mx6 hdmi transmitter support"). Remove the cable_plugin element and the hdmi_enable_overflow_interrupts() function that is never called. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> # On R-Car H3 Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1518812170-22687-1-git-send-email-festevam@gmail.com
2018-03-14drm/bridge: analogix_dp: Only wait for panel ACK on PSR entryzain wang3-4/+7
We currently wait for the panel to mirror our intended PSR state before continuing on both PSR enter and PSR exit. This is really only important to do when we're entering PSR, since we want to be sure the last frame we pushed is being served from the panel's internal fb before shutting down the soc blocks (vop/analogix). This patch changes the behavior such that we only wait for the panel to complete the PSR transition when we're entering PSR, and to skip verification when we're exiting. Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: Sonny Rao <sonnyrao@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180309222327.18689-7-enric.balletbo@collabora.com
2018-03-14drm/bridge: analogix_dp: add fast link train for eDPzain wang2-25/+108
We would meet a short black screen when exit PSR with the full link training, In this case, we should use fast link train instead of full link training. Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> [dropped header reordering] Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180309222327.18689-6-enric.balletbo@collabora.com
2018-03-14drm/bridge: analogix_dp: Don't change psr while bridge is disabledzain wang2-8/+9
There is a race between AUX CH bring-up and enabling bridge which will cause link training to fail. To avoid hitting it, don't change psr state while enabling the bridge. Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> [seanpaul fixed up the commit message a bit and renamed *_supported to *_enabled] Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180309222327.18689-4-enric.balletbo@collabora.com
2018-03-14drm/bridge: analogix_dp: detect Sink PSR state after configuring the PSRYakir Yang3-10/+37
Make sure the request PSR state takes effect in analogix_dp_send_psr_spd() function, or print the sink PSR error state if we failed to apply the requested PSR setting. Cc: 征增 王 <wzz@rock-chips.com> Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: Yakir Yang <ykk@rock-chips.com> [seanpaul changed timeout loop to a readx poll] Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180309222327.18689-2-enric.balletbo@collabora.com
2018-03-12drm/bridge/sii8620: use micro-USB cable detection logic to detect MHLMaciej Purski1-3/+94
Currently MHL chip must be turned on permanently to detect MHL cable. It duplicates micro-USB controller's (MUIC) functionality and consumes unnecessary power. Lets use extcon attached to MUIC to enable MHL chip only if it detects MHL cable. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-03-07drm/bridge: sii902x: Retry status read after DDI I2CLinus Walleij1-4/+16
The following happens when connection a DVI output driven from the SiI9022 using a DVI-to-VGA adapter plug: i2c i2c-0: sendbytes: NAK bailout. i2c i2c-0: sendbytes: NAK bailout. Then no picture. Apparently the I2C engine inside the SiI9022 is not smart enough to try to fall back to DDC I2C. Or the vendor have not integrated the electronics properly. I don't know which one it is. After this, the I2C bus seems stalled and the first attempt to read the status register fails, and the code returns with negative return value, and the display fails to initialized. Instead, retry status readout five times and continue even if this fails. Tested on the ARM Versatile Express with a DVI-to-VGA connector, it now gives picture. Introduce a helper struct device *dev variable to make the code more readable. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180305101702.13441-1-linus.walleij@linaro.org
2018-03-07bridge: Elaborate a bit on dumb VGA bridges in KconfigLinus Walleij1-1/+2
It's better if we explain a bit that this pertains to non-programmable VGA DAC bridges. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180302091426.8463-1-linus.walleij@linaro.org
2018-03-07drm/bridge: analogix_dp: Don't create useless connectorsMarek Szyprowski1-13/+16
If there is another bridge after analogix_dp, then the connector object should not be created. This fixes following timeouts on Exynos5420-based Chromebook2 Peach-PIT board during boot: exynos-dp 145b0000.dp-controller: AUX CH cmd reply timeout! exynos-dp 145b0000.dp-controller: AUX CH enable timeout! exynos-dp 145b0000.dp-controller: AUX CH enable timeout! exynos-dp 145b0000.dp-controller: AUX CH enable timeout! exynos-dp 145b0000.dp-controller: AUX CH enable timeout! Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180305085741.18896-4-m.szyprowski@samsung.com
2018-03-07drm/bridge: analogix_dp: Postpone enabling runtime power managementMarek Szyprowski1-3/+3
Enabling runtime power management early in analogix_dp_bind() causes following kernel NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 000007d8 pgd = 28ffa2e4 [000007d8] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 6 PID: 69 Comm: kworker/6:1 Not tainted 4.16.0-rc1-00062-ge25751974ba8 #3622 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) Workqueue: events deferred_probe_work_func PC is at analogix_dp_resume+0x8/0xc0 LR is at pm_generic_runtime_resume+0x2c/0x38 pc : [<c0531b98>] lr : [<c0543fec>] psr: a0000113 sp : ee13fbd8 ip : 0000001a fp : 00000001 r10: ee0eb080 r9 : c0552bd8 r8 : c0fb1d98 r7 : eebb1010 r6 : eeae9808 r5 : 00000000 r4 : d4850415 r3 : ee0ed010 r2 : b2d05e00 r1 : 00000000 r0 : 00000000 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 2000406a DAC: 00000051 Process kworker/6:1 (pid: 69, stack limit = 0x913205b4) Stack: (0xee13fbd8 to 0xee140000) ... [<c0531b98>] (analogix_dp_resume) from [<c0543fec>] (pm_generic_runtime_resume+0x2c/0x38) [<c0543fec>] (pm_generic_runtime_resume) from [<c054ffb4>] (__genpd_runtime_resume+0x2c/0x8c) [<c054ffb4>] (__genpd_runtime_resume) from [<c0552d24>] (genpd_runtime_resume+0x14c/0x258) [<c0552d24>] (genpd_runtime_resume) from [<c0547798>] (__rpm_callback+0x134/0x214) [<c0547798>] (__rpm_callback) from [<c0547898>] (rpm_callback+0x20/0x80) [<c0547898>] (rpm_callback) from [<c0546ff4>] (rpm_resume+0x3a0/0x734) [<c0546ff4>] (rpm_resume) from [<c05475ec>] (__pm_runtime_resume+0x64/0x9c) [<c05475ec>] (__pm_runtime_resume) from [<c053b95c>] (__device_attach+0x8c/0x134) [<c053b95c>] (__device_attach) from [<c053ad08>] (bus_probe_device+0x88/0x90) [<c053ad08>] (bus_probe_device) from [<c05390d0>] (device_add+0x3a8/0x580) [<c05390d0>] (device_add) from [<c06764c4>] (i2c_register_adapter+0xd4/0x3ec) [<c06764c4>] (i2c_register_adapter) from [<c05321c8>] (analogix_dp_bind+0x2a0/0x410) [<c05321c8>] (analogix_dp_bind) from [<c0528e90>] (exynos_dp_bind+0x9c/0x12c) [<c0528e90>] (exynos_dp_bind) from [<c0535bc4>] (component_bind_all+0xfc/0x258) [<c0535bc4>] (component_bind_all) from [<c0522ee8>] (exynos_drm_bind+0x15c/0x28c) [<c0522ee8>] (exynos_drm_bind) from [<c0536378>] (try_to_bring_up_master+0x1b8/0x29c) [<c0536378>] (try_to_bring_up_master) from [<c05364fc>] (component_add+0xa0/0x170) [<c05364fc>] (component_add) from [<c0528fe4>] (exynos_dp_probe+0x64/0xb8) [<c0528fe4>] (exynos_dp_probe) from [<c053debc>] (platform_drv_probe+0x50/0xb0) [<c053debc>] (platform_drv_probe) from [<c053bd18>] (driver_probe_device+0x2b8/0x4a0) [<c053bd18>] (driver_probe_device) from [<c0539e4c>] (bus_for_each_drv+0x44/0x8c) [<c0539e4c>] (bus_for_each_drv) from [<c053b970>] (__device_attach+0xa0/0x134) [<c053b970>] (__device_attach) from [<c053ad08>] (bus_probe_device+0x88/0x90) [<c053ad08>] (bus_probe_device) from [<c053b258>] (deferred_probe_work_func+0x3c/0x168) [<c053b258>] (deferred_probe_work_func) from [<c014352c>] (process_one_work+0x1d0/0x7bc) [<c014352c>] (process_one_work) from [<c0143b84>] (worker_thread+0x34/0x4dc) [<c0143b84>] (worker_thread) from [<c014a30c>] (kthread+0x128/0x164) [<c014a30c>] (kthread) from [<c01010b4>] (ret_from_fork+0x14/0x20) Exception stack(0xee13ffb0 to 0xee13fff8) ffa0: 00000000 00000000 00000000 00000000 ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 Code: e2800e37 eafee601 e92d4070 e1a05000 (e59067d8) ---[ end trace bf6046013df7cab2 ]--- This oops happens, because analogix_dp_bind() calls drm_dp_aux_register() which registers i2c adapter. I2C core tries to runtime get i2c host device during registration. This ends in analogix_dp_resume(), but dp context is NULL there. dp context is set in exynos_dp_bind() after executing analogix_dp_bind(). Fix this issue by postponing enabling runtime power management after drm_dp_aux_register(). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180305085741.18896-3-m.szyprowski@samsung.com
2018-03-07drm/bridge: analogix_dp: Don't power bridge in analogix_dp_bindzain wang1-10/+0
The bridge does not need to be powered in analogix_dp_bind(), so remove the calls to pm_runtime_get()/phy_power_on()/analogix_dp_init_dp() as well as their power-off counterparts. Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> [the patch originally just removed the power_on portion, seanpaul removed the power off code as well as improved the commit message] Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180305085741.18896-2-m.szyprowski@samsung.com
2018-03-06drm: bridge: dw-hdmi: Fix overflow workaround for Amlogic Meson GX SoCsNeil Armstrong1-0/+3
The Amlogic Meson GX SoCs, embedded the v2.01a controller, has been also identified needing this workaround. This patch adds the corresponding version to enable a single iteration for this specific version. Fixes: be41fc55f1aa ("drm: bridge: dw-hdmi: Handle overflow workaround based on device version") Acked-by: Archit Taneja <architt@codeaurora.org> [narmstrong: s/identifies/identified and rebased against Jernej's change] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/1519386277-25902-1-git-send-email-narmstrong@baylibre.com
2018-03-05drm/bridge/synopsys: dsi: readl_poll_timeout return value clean upPhilippe CORNU1-5/+5
The readl_poll_timeout() return value is 0 in case of success so it is better to detect errors without taking care of the return value sign. Signed-off-by: Philippe Cornu <philippe.cornu@st.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180204213624.18288-1-philippe.cornu@st.com
2018-03-01drm/bridge: analogix_dp: Fix connector and encoder cleanupJeffy Chen1-2/+0
Since we are initing connector in the core driver and encoder in the plat driver, let's clean them up in the right places. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180110162348.22765-3-thierry.escande@collabora.com
2018-03-01drm/bridge: analogix: Do not use device's drvdataJeffy Chen1-30/+20
The driver that instantiates the bridge should own the drvdata, as all driver model callbacks (probe, remove, shutdown, PM ops, etc.) are also owned by its driver struct. Moreover, storing two different pointer types in driver data depending on driver initialization status is barely a good practice and in fact has led to many bugs in this driver. Let's clean up this mess and change Analogix entry points to simply accept some opaque struct pointer, adjusting their users at the same time to avoid breaking the compilation. Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Jingoo Han <jingoohan1@gmail.com> Acked-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180110162348.22765-2-thierry.escande@collabora.com
2018-02-16drm/bridge/synopsys: dw-hdmi: don't clobber drvdataJernej Skrabec1-18/+13
dw_hdmi shouldn't set drvdata since some drivers might need to store it's own data there. Rework dw_hdmi in a way to return struct dw_hdmi instead to store it in drvdata. This way drivers are responsible to store and pass structure when needed. Idea was taken from the following commit: 8242ecbd597d ("drm/bridge/synopsys: stop clobbering drvdata") Cc: p.zabel@pengutronix.de Cc: Laurent.pinchart@ideasonboard.com Cc: hjc@rock-chips.com Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214200906.31509-6-jernej.skrabec@siol.net
2018-02-16drm/bridge/synopsys: dw-hdmi: Export some PHY related functionsJernej Skrabec1-14/+30
Parts of PHY code could be useful also for custom PHYs. For example, Allwinner A83T has custom PHY which is probably Synopsys gen2 PHY with few additional memory mapped registers, so most of the Synopsys PHY related code could be reused. Functions exported here are actually not specific to Synopsys PHYs but to DWC HDMI controller PHY interface. This means that even if the PHY is completely custom, i.e. not designed by Synopsys, exported functions can be useful. Reviewed-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214200906.31509-5-jernej.skrabec@siol.net
2018-02-16drm/bridge/synopsys: dw-hdmi: Enable workaround for v1.32aJernej Skrabec1-3/+5
Allwinner SoCs have dw hdmi controller v1.32a which exhibits same magenta line issue as i.MX6Q and i.MX6DL. Enable workaround for it. Tests show that one iteration is enough. Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214200906.31509-4-jernej.skrabec@siol.net
2018-02-08drm/bridge/synopsys: dsi: Add 1.31 version supportPhilippe Cornu1-3/+20
Add support for the Synopsys DesignWare MIPI DSI version 1.31 Two registers need to be updated/added for supporting 1.31: * PHY_TMR_CFG 0x9c (updated) 1.30 [31:24] phy_hs2lp_time [23:16] phy_lp2hs_time [14: 0] max_rd_time 1.31 [25:16] phy_hs2lp_time [ 9: 0] phy_lp2hs_time * PHY_TMR_RD_CFG 0xf4 (new) 1.31 [14: 0] max_rd_time Signed-off-by: Philippe Cornu <philippe.cornu@st.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180206084251.303-1-philippe.cornu@st.com
2018-02-08drm/bridge/synopsys: dsi: Add read featurePhilippe Cornu1-13/+45
This patch adds the DCS/GENERIC DSI read feature. Signed-off-by: Philippe Cornu <philippe.cornu@st.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180204213104.17834-1-philippe.cornu@st.com
2018-01-30drm/bridge/synopsys: dsi: Fix dsi_host_transfer() return valuePhilippe Cornu1-1/+10
The dw_mipi_dsi_host_transfer() must return the number of bytes transmitted/received on success instead of 0. Note: As the read feature is not implemented, only the transmitted number of bytes is returned for the moment. Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180125103800.1999-3-philippe.cornu@st.com
2018-01-30drm/bridge/synopsys: dsi: Add a warning msg on dsi read requestsPhilippe Cornu1-0/+6
The dcs/generic dsi read feature is not yet implemented so it is important to warn the host_transfer() caller in case of read operation requests. Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180125103800.1999-2-philippe.cornu@st.com
2018-01-19Merge airlied/drm-next into drm-misc-nextSean Paul1-0/+2
It's been a while since we've backmerged drm-next. Dave just brought back 4.15-rc8, so now's a good time to freshen things up around here. Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-01-18drm/bridge: analogix-anx78xx: Remove duplicate NULL checkAndy Shevchenko1-2/+1
Since i2c_unregister_device() became NULL-aware we may remove duplicate NULL check. Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171031142149.32512-6-andriy.shevchenko@linux.intel.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2018-01-16drm/bridge/synopsys: dsi: handle endianness correctly in dw_mipi_dsi_write()Brian Norris1-9/+9
We're filling the "remainder" word with little-endian data, then writing it out to IO registers with endian-correcting writel(). That probably won't work on big-endian systems. Let's mark the "remainder" variable as LE32 (since we fill it with memcpy()) and do the swapping explicitly. Some of this function could be done more easily without memcpy(), but the unaligned "remainder" case is a little hard to do without potentially overrunning 'tx_buf', so I just applied the same solution in all cases (memcpy() + le32_to_cpu()). Tested only on a little-endian system. Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180109203248.139249-2-briannorris@chromium.org
2018-01-16drm/bridge/synopsys: dsi: use common mipi_dsi_create_packet()Brian Norris1-62/+16
This takes care of 2 TODOs in this driver, by using the common DSI packet-marshalling code instead of our custom short/long write code. This both saves us some duplicated code and gets us free support for command types that weren't already part of our switch block (e.g., MIPI_DSI_GENERIC_LONG_WRITE). The code logic stays mostly intact, except that it becomes unnecessary to split the short/long write functions, and we have to copy data a bit more. Along the way, I noticed that loop bounds were a little odd: while (DIV_ROUND_UP(len, pld_data_bytes)) This really was just supposed to be 'len != 0', so I made that more clear. Tested on RK3399 with some pending refactoring patches by Nickey Yang, to make the Rockchip DSI driver wrap this common driver. Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Tested-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180109203248.139249-1-briannorris@chromium.org
2018-01-16drm/bridge/synopsys: dsi: make dw_mipi_dsi_bridge_mode_set() staticBrian Norris1-3/+3
sparse complains: drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c:703:6: warning: symbol 'dw_mipi_dsi_bridge_mode_set' was not declared. Should it be static? Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180109203319.139520-1-briannorris@chromium.org
2018-01-12drm/bridge: Add timing support to dumb VGA DACLinus Walleij1-3/+56
This extends the dumb VGA DAC bridge to handle the THS8134A and THS8134B VGA DACs in addition to those already handled. We assign the proper timing data to the pointer inside the bridge struct so display controllers that need to align their timings to the bridge can pick it up and work from there. Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180112074854.9560-3-linus.walleij@linaro.org
2018-01-09drm/bridge/synopsys: stop clobbering drvdataBrian Norris1-23/+13
Bridge drivers/helpers shouldn't be clobbering the drvdata, since a parent driver might need to own this. Instead, let's return our 'dw_mipi_dsi' object and have callers pass that back to us for removal. Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Archit Taneja <architt@codeaurora.org> Acked-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171128010538.119114-1-briannorris@chromium.org
2018-01-09drm/bridge: analogix: Remove unreachable code from analogic_dp_core.cSylwester Nawrocki1-5/+1
This patch removes an unreachable code found by the SVACE static analysis: UNREACHABLE_CODE: This statement in the source code might be unreachable during program execution. [unreachable] unreachable at drivers/gpu/drm/bridge/analogix/analogix_dp_core.c:787 retval != 0 is always false because at this program point the variable retval is always equal to 0 at drivers/gpu/drm/bridge/analogix/analogix_dp_core.c:786 Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171212112037.13107-1-s.nawrocki@samsung.com
2017-12-19BackMerge tag 'v4.15-rc4' into drm-nextDave Airlie1-0/+2
Linux 4.15-rc4 Daniel requested it to fix some messy conflicts.
2017-12-07drm/bridge: analogix dp: Fix runtime PM state in get_modes() callbackMarek Szyprowski1-0/+2
get_modes() callback might be called asynchronously from the DRM core and it is not synchronized with bridge_enable(), which sets proper runtime PM state of the main DP device. Fix this by calling pm_runtime_get_sync() before calling drm_get_edid(), which in turn calls drm_dp_i2c_xfer() and analogix_dp_transfer() to ensure that main DP device is runtime active when doing any access to its registers. This fixes the following kernel issue on Samsung Exynos5250 Snow board: Unhandled fault: imprecise external abort (0x406) at 0x00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: : 406 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 62 Comm: kworker/0:2 Not tainted 4.13.0-rc2-00364-g4a97a3da420b #3357 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) Workqueue: events output_poll_execute task: edc14800 task.stack: edcb2000 PC is at analogix_dp_transfer+0x15c/0x2fc LR is at analogix_dp_transfer+0x134/0x2fc pc : [<c0468538>] lr : [<c0468510>] psr: 60000013 sp : edcb3be8 ip : 0000002a fp : 00000001 r10: 00000000 r9 : edcb3cd8 r8 : edcb3c40 r7 : 00000000 r6 : edd3b380 r5 : edd3b010 r4 : 00000064 r3 : 00000000 r2 : f0ad3000 r1 : edcb3c40 r0 : edd3b010 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 4000406a DAC: 00000051 Process kworker/0:2 (pid: 62, stack limit = 0xedcb2210) Stack: (0xedcb3be8 to 0xedcb4000) [<c0468538>] (analogix_dp_transfer) from [<c0424ba4>] (drm_dp_i2c_do_msg+0x8c/0x2b4) [<c0424ba4>] (drm_dp_i2c_do_msg) from [<c0424e64>] (drm_dp_i2c_xfer+0x98/0x214) [<c0424e64>] (drm_dp_i2c_xfer) from [<c057b2d8>] (__i2c_transfer+0x140/0x29c) [<c057b2d8>] (__i2c_transfer) from [<c057b4a4>] (i2c_transfer+0x70/0xe4) [<c057b4a4>] (i2c_transfer) from [<c0441de4>] (drm_do_probe_ddc_edid+0xb4/0x114) [<c0441de4>] (drm_do_probe_ddc_edid) from [<c0441e5c>] (drm_probe_ddc+0x18/0x28) [<c0441e5c>] (drm_probe_ddc) from [<c0445728>] (drm_get_edid+0x124/0x2d4) [<c0445728>] (drm_get_edid) from [<c0465ea0>] (analogix_dp_get_modes+0x90/0x114) [<c0465ea0>] (analogix_dp_get_modes) from [<c0425e8c>] (drm_helper_probe_single_connector_modes+0x198/0x68c) [<c0425e8c>] (drm_helper_probe_single_connector_modes) from [<c04325d4>] (drm_setup_crtcs+0x1b4/0xd18) [<c04325d4>] (drm_setup_crtcs) from [<c04344a8>] (drm_fb_helper_hotplug_event+0x94/0xd0) [<c04344a8>] (drm_fb_helper_hotplug_event) from [<c0425a50>] (drm_kms_helper_hotplug_event+0x24/0x28) [<c0425a50>] (drm_kms_helper_hotplug_event) from [<c04263ec>] (output_poll_execute+0x6c/0x174) [<c04263ec>] (output_poll_execute) from [<c0136f18>] (process_one_work+0x188/0x3fc) [<c0136f18>] (process_one_work) from [<c01371f4>] (worker_thread+0x30/0x4b8) [<c01371f4>] (worker_thread) from [<c013daf8>] (kthread+0x128/0x164) [<c013daf8>] (kthread) from [<c0108510>] (ret_from_fork+0x14/0x24) Code: 0a000002 ea000009 e2544001 0a00004a (e59537c8) ---[ end trace cddc7919c79f7878 ]--- Reported-by: Misha Komarovskiy <zombah@gmail.com> CC: stable@vger.kernel.org # v4.10+ Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171121074936.22520-1-m.szyprowski@samsung.com
2017-12-04Merge tag 'drm-misc-next-2017-11-30' of ↵Dave Airlie4-24/+39
git://anongit.freedesktop.org/drm/drm-misc into drm-next Cross-subsystem Changes: - device tree doc for the Mitsubishi AA070MC01 and Tianma TM070RVHG71 panels (Lukasz Majewski) and for a 2nd endpoint on stm32 (Philippe Cornu) Core Changes: The most important changes are: - Add drm_driver .last_close and .output_poll_changed helpers to reduce fbdev emulation footprint in drivers (Noralf) - Fix plane clipping in core and for vmwgfx (Ville) Then we have a bunch of of improvement for print and debug such as the addition of a framebuffer debugfs file. ELD connector, HDMI and improvements. And a bunch of misc improvements, clean ups and style changes and doc updates [airlied: drop eld bits from amdgpu_dm] Driver Changes: - sii8620: filter unsupported modes and add DVI mode support (Maciej Purski) - rockchip: analogix_dp: Remove unnecessary init code (Jeffy Chen) - virtio, cirrus: add fb create_handle support to enable screenshots(Lepton Wu) - virtio: replace reference/unreference with get/put (Aastha Gupta) - vc4, gma500: Convert timers to use timer_setup() (Kees Cook) - vc4: Reject HDMI modes with too high of clocks (Eric) - vc4: Add support for more pixel formats (Dave Stevenson) - stm: dsi: Rename driver name to "stm32-display-dsi" (Philippe Cornu) - stm: ltdc: add a 2nd endpoint (Philippe Cornu) - via: use monotonic time for VIA_WAIT_IRQ (Arnd Bergmann) * tag 'drm-misc-next-2017-11-30' of git://anongit.freedesktop.org/drm/drm-misc: (96 commits) drm/bridge: tc358767: add copyright lines MAINTAINERS: change maintainer for Rockchip drm drivers drm/vblank: Fix vblank timestamp debugs drm/via: use monotonic time for VIA_WAIT_IRQ dma-buf: Fix ifnullfree.cocci warnings drm/printer: Add drm_vprintf() drm/edid: Allow HDMI infoframe without VIC or S3D video/hdmi: Allow "empty" HDMI infoframes dma-buf/fence: Fix lock inversion within dma-fence-array drm/sti: Handle return value of platform_get_irq_byname drm/vc4: Add support for NV21 and NV61. drm/vc4: Use .pixel_order instead of custom .flip_cbcr drm/vc4: Add support for DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888 drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c drm: Check crtc_state->enable rather than crtc->enabled in drm_plane_helper_check_state() drm/vmwgfx: Try to fix plane clipping drm/vmwgfx: Use drm_plane_helper_check_state() drm/vmwgfx: Remove bogus crtc coords vs fb size check gpu: gma500: remove unneeded DRIVER_LICENSE #define drm: don't link DP aux i2c adapter to the hardware device node ...
2017-11-30drm/bridge: tc358767: add copyright linesAndrey Gusakov1-0/+2
Add copyright lines for Zodiac who paid for driver development. Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Acked-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-8-git-send-email-andrey.gusakov@cogentembedded.com
2017-11-30drm/bridge: tc358767: fix 1-lane behaviorAndrey Gusakov1-10/+3
Use drm_dp_channel_eq_ok helper Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-7-git-send-email-andrey.gusakov@cogentembedded.com
2017-11-30drm/bridge: tc358767: fix AUXDATAn registers accessAndrey Gusakov1-1/+1
First four bytes should go to DP0_AUXWDATA0. Due to bug if len > 4 first four bytes was writen to DP0_AUXWDATA1 and all data get shifted by 4 bytes. Fix it. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-6-git-send-email-andrey.gusakov@cogentembedded.com
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-09 22:07:34 +0000