summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/bochs
AgeCommit message (Collapse)AuthorFilesLines
2015-08-10drm/bochs: Don't grab dev->struct_mutex for in mmap offset ioctlDaniel Vetter1-12/+4
Since David Herrmann's mmap vma manager rework we don't need to grab dev->struct_mutex any more to prevent races when looking up the mmap offset. Drop it and instead don't forget to use the unref_unlocked variant (since the drm core still cares). Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-08-06drm/bochs: Use new drm_fb_helper functionsArchit Taneja2-27/+13
Use the newly created wrapper drm_fb_helper functions instead of calling core fbdev functions directly. They also simplify the fb_info creation. v3: - Don't touch remove_conflicting_framebuffers v2: - remove unused variable device in bochsfb_create Cc: David Airlie <airlied@linux.ie> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-01drm/bochs: disable video before changing video modeChris Ruffin1-0/+1
qemu and simics simulators both seem to expect that video should be disabled before changing the video mode. references: http://git.qemu.org/?p=qemu.git;a=blob;f=hw/display/vga.c;h=c0f7b343bbab586c8593d29c7a765f1e6ca3662c;hb=HEAD#l727 http://wiki.osdev.org/Bochs_VBE_Extensions#Setting_display_resolution_and_bit_depth Signed-off-by: Chris Ruffin <chris.ruffin@intel.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-01-21drm/fb-helper: Propagate errors from initial config failureThierry Reding1-2/+12
Make drm_fb_helper_initial_config() return an int rather than a bool so that the error can be properly propagated. While at it, update drivers to propagate errors further rather than just ignore them. v2: - cirrus: No cleanup is required, the top-level cirrus_driver_load() will do it as part of cirrus_driver_unload() in its cleanup path. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> [danvet: Squash in simplification patch from kbuild.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-10drm/bochs: Remove dummy ->load_lut() implementationThierry Reding1-5/+0
The ->load_lut() callback is optional, therefore a dummy implementation is not needed. Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-20bochs: add page_flipGerd Hoffmann1-0/+21
Implement crtc page_flip callback for bochsdrm. The qemu stdvga has no vblank signaling, so we have to fake it. We do so by instantly calling drm_send_vblank_event. Tested with kmscon. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-11-20bochs: fix bochsdrmfb mmapGerd Hoffmann1-4/+14
Remove the mapping offset from the bo backing the fbdev framebuffer. Wire up fbdev mmap function to map the backing bo using ttm_fbdev_mmap. With that patch in place mmap(/dev/fb0) works as expected. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-11-20bochs: add endian switching supportGerd Hoffmann1-1/+19
Recently (qemu 2.2+) the qemu stdvga got a register to switch the vga framebuffer endianness. This patch adds code to explicitly set the endianness of the framebuffer. In most cases this has no effect as the default is guest architecture endianness. It is needed though in case a architecture supports both big and little endian, i.e. for ppc64le. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-11-20bochs: little cleanupGerd Hoffmann1-2/+1
Drop some leftover, commented code. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-11-05drm: Move drm_crtc_init from drm_crtc.h to drm_plane_helper.hDaniel Vetter1-0/+1
Just a bit of OCD cleanup on headers - this function isn't the core interface any more but just a helper for drivers who haven't yet transitioned to universal planes. Put the declaration at the right spot and sprinkle necessary #includes over all drivers. Maybe this helps to encourage driver maintainers to do the switch. v2: Fix #include ordering for tegra, reported by 0-day builder. v3: Include required headers, reported by Thierry. Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Thierry Reding <treding@nvidia.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2014-10-14Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds3-10/+19
Pull drm updates from Dave Airlie: "This is the main git pull for the drm, I pretty much froze major pulls at -rc5/6 time, and haven't had much fallout, so will probably continue doing that. Lots of changes all over, big internal header cleanup to make it clear drm features are legacy things and what are things that modern KMS drivers should be using. Also big move to use the new generic fences in all the TTM drivers. core: atomic prep work, vblank rework changes, allows immediate vblank disables major header reworking and cleanups to better delinate legacy interfaces from what KMS drivers should be using. cursor planes locking fixes ttm: move to generic fences (affects all TTM drivers) ppc64 caching fixes radeon: userptr support, uvd for old asics, reset rework for fence changes better buffer placement changes, dpm feature enablement hdmi audio support fixes intel: Cherryview work, 180 degree rotation, skylake prep work, execlist command submission full ppgtt prep work cursor improvements edid caching, vdd handling improvements nouveau: fence reworking kepler memory clock work gt21x clock work fan control improvements hdmi infoframe fixes DP audio ast: ppc64 fixes caching fix rcar: rcar-du DT support ipuv3: prep work for capture support msm: LVDS support for mdp4, new panel, gpu refactoring exynos: exynos3250 SoC support, drop bad mmap interface, mipi dsi changes, and component match support" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (640 commits) drm/mst: rework payload table allocation to conform better. drm/ast: Fix HW cursor image drm/radeon/kv: add uvd/vce info to dpm debugfs output drm/radeon/ci: add uvd/vce info to dpm debugfs output drm/radeon: export reservation_object from dmabuf to ttm drm/radeon: cope with foreign fences inside the reservation object drm/radeon: cope with foreign fences inside display drm/core: use helper to check driver features drm/radeon/cik: write gfx ucode version to ucode addr reg drm/radeon/si: print full CS when we hit a packet 0 drm/radeon: remove unecessary includes drm/radeon/combios: declare legacy_connector_convert as static drm/radeon/atombios: declare connector convert tables as static drm/radeon: drop btc_get_max_clock_from_voltage_dependency_table drm/radeon/dpm: drop clk/voltage dependency filters for BTC drm/radeon/dpm: drop clk/voltage dependency filters for CI drm/radeon/dpm: drop clk/voltage dependency filters for SI drm/radeon/dpm: drop clk/voltage dependency filters for NI drm/radeon: disable audio when we disable hdmi (v2) drm/radeon: split audio enable between eg and r600 (v2) ...
2014-09-30drm/ttm: add reservation_object as argument to ttm_bo_initMaarten Lankhorst1-1/+1
This allows importing reservation objects from dma-bufs. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
2014-09-24drm: Extract <drm/drm_gem.h>Daniel Vetter1-0/+2
v2: Don't forget git add, noticed by David. Cc: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Acked-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-09-24drm/<ttm-based-drivers>: Don't call drm_mmapDaniel Vetter1-1/+1
Really, the legacy buffer api should be dead, especially for all these newfangled drivers. I suspect this is copypasta from the transitioning days, which probably originated in radeon. Cc: "Christian König" <christian.koenig@amd.com> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Rashika <rashika.kheria@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Fabian Frederick <fabf@skynet.be> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com> Cc: Christian Engelmayer <cengelma@gmx.at> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Ben Skeggs <bskeggs@redhat.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-09-20drm/bochs: add missing drm_connector_register callGerd Hoffmann1-0/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-09-10drm: add driver->set_busid() callbackDavid Herrmann1-0/+1
One step closer to dropping all the drm_bus_* code: Add a driver->set_busid() callback and make all drivers use the generic helpers. Nouveau is the only driver that uses two different bus-types with the same drm_driver. This is totally broken if both buses are available on the same machine (unlikely, but lets be safe). Therefore, we create two different drivers for each platform during module_init() and set the set_busid() callback respectively. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-08-27drm/ttm: move fpfn and lpfn into each placement v2Christian König2-8/+14
This allows us to more fine grained specify where to place the buffer object. v2: rebased on drm-next, add bochs changes as well Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine1-1/+1
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-22drm: bochs: fix warningsRussell King1-0/+2
Regular nightly randconfig build testing discovered these warnings: drivers/gpu/drm/bochs/bochs_drv.c:100:12: warning: 'bochs_pm_suspend' defined but not used [-Wunused-function] drivers/gpu/drm/bochs/bochs_drv.c:117:12: warning: 'bochs_pm_resume' defined but not used [-Wunused-function] Fix these by adding the same condition that SET_SYSTEM_SLEEP_PM_OPS() uses. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-22drm/ttm: Fix a few sparse warningsThierry Reding2-3/+3
The final parameter to ttm_bo_reserve() is a pointer, therefore callers should use NULL instead of 0. Fixes a bunch of sparse warnings of this type: warning: Using plain integer as NULL pointer Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-18drm/bochs: use helpersRob Clark1-11/+2
Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08drm: Introduce drm_fb_helper_prepare()Thierry Reding1-1/+2
To implement hotplug detection in a race-free manner, drivers must call drm_kms_helper_poll_init() before hotplug events can be triggered. Such events can be triggered right after any of the encoders or connectors are initialized. At the same time, if the drm_fb_helper_hotplug_event() helper is used by a driver, then the poll helper requires some parts of the FB helper to be initialized to prevent a crash. At the same time, drm_fb_helper_init() requires information that is not necessarily available at such an early stage (number of CRTCs and connectors), so it cannot be used yet. Add a new helper, drm_fb_helper_prepare(), that initializes the bare minimum needed to allow drm_kms_helper_poll_init() to execute and any subsequent hotplug events to be processed properly. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08drm: Constify struct drm_fb_helper_funcsThierry Reding1-1/+1
There's no need for this to be modifiable. Make it const so that it can be put into the .rodata section. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08drm/bochs: replace ALIGN(PAGE_SIZE) by PAGE_ALIGNFabian Frederick1-1/+1
use mm.h definition Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
2014-04-22drm/bochs: Remove unecessary NULL check in gem_freeDaniel Vetter1-2/+0
The ->gem_free_object never gets called with a NULL pointer, the check is redundant. Also checking after the upcast allows compilers to elide it anyway. Noticed while chasing coverity reports, somehow this one here was not flagged. Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-22drm/bochs: Remove unnecessary NULL check in bo_unrefDaniel Vetter1-3/+1
ttm_bo_unref unconditionally calls kref_put on it's argument, so the thing can't be NULL without already causing Oopses. Spotted by coverity. Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-18drm: bochs: drop unused struct fieldsGerd Hoffmann2-3/+0
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-04-18drm: bochs: add power management supportGerd Hoffmann2-0/+45
bochs kms driver lacks power management support, thus the vga display doesn't work any more after S3 resume. Fix this by adding suspend and resume functions. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-04-01drm: Replace crtc fb with primary plane fb (v3)Matt Roper1-2/+2
Now that CRTC's have a primary plane, there's no need to track the framebuffer in the CRTC. Replace all references to the CRTC fb with the primary plane's fb. This patch was generated by the Coccinelle semantic patching tool using the following rules: @@ struct drm_crtc C; @@ - (C).fb + C.primary->fb @@ struct drm_crtc *C; @@ - (C)->fb + C->primary->fb v3: Generate patch via coccinelle. Actual removal of crtc->fb has been moved to a subsequent patch. v2: Fixup several lingering crtc->fb instances that were missed in the first patch iteration. [Rob Clark] Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-03-18Merge branch 'drm-next' of git://people.freedesktop.org/~dvdhrm/linux into ↵Dave Airlie1-2/+4
drm-next This is the 3rd respin of the drm-anon patches. They allow module unloading, use the pin_fs_* helpers recommended by Al and are rebased on top of drm-next. Note that there are minor conflicts with the "drm-minor" branch. * 'drm-next' of git://people.freedesktop.org/~dvdhrm/linux: drm: init TTM dev_mapping in ttm_bo_device_init() drm: use anon-inode instead of relying on cdevs drm: add pseudo filesystem for shared inodes
2014-03-16drm: init TTM dev_mapping in ttm_bo_device_init()David Herrmann1-1/+3
With dev->anon_inode we have a global address_space ready for operation right from the beginning. Therefore, there is no need to do a delayed setup with TTM. Instead, set dev_mapping during initialization in ttm_bo_device_init() and remove any "if (dev_mapping)" conditions. Cc: Dave Airlie <airlied@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
2014-03-16drm: use anon-inode instead of relying on cdevsDavid Herrmann1-1/+1
DRM drivers share a common address_space across all character-devices of a single DRM device. This allows simple buffer eviction and mapping-control. However, DRM core currently waits for the first ->open() on any char-dev to mark the underlying inode as backing inode of the device. This delayed initialization causes ugly conditions all over the place: if (dev->dev_mapping) do_sth(); To avoid delayed initialization and to stop reusing the inode of the char-dev, we allocate an anonymous inode for each DRM device and reset filp->f_mapping to it on ->open(). Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
2014-03-07drm: fix bochs kconfig dependenciesGerd Hoffmann1-0/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-12-23drm/bochs: new driverGerd Hoffmann8-0/+1589
DRM driver for (virtual) vga cards using the bochs dispi interface, such as the qemu standard vga (qemu -vga std). Don't bother supporting anything but 32bpp for now, even though the virtual hardware is able to do that. Known issue: mmap(/dev/fb0) doesn't work. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 15:01:54 +0000