summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/ast
AgeCommit message (Collapse)AuthorFilesLines
2022-05-05drm: simplify the return expression of ast_drm_resume()Minghao Chi1-6/+1
Simplify the return expression. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220505022208.57157-1-chi.minghao@zte.com.cn
2022-05-05drm/ast: Protect concurrent access to I/O registers with lockThomas Zimmermann3-3/+50
Add a mutex lock to protect concurrent access to I/O registers against each other. This happens between invocation of commit- tail functions and get-mode operations. Both with use the CRTC index register AST_IO_CRTC_PORT. Concurrent access can lead to failed mode-setting operations. v2: * fix typo in commit description (Jocelyn) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reported-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220502142514.2174-3-tzimmermann@suse.de
2022-05-03drm/ast: Create the driver for ASPEED proprietory Display-PortKuoHsiang Chou6-8/+524
V1: 1. The MCU FW controling ASPEED DP is loaded by BMC boot loader. 2. Driver starts after CR[3:1] == 111b that indicates Tx is ASTDP, and CRD1[5] has been asserted by BMVC boot loader. 3. EDID is prioritized by DP monitor. 4. DP's EDID has high priority to decide resolution supporting. V2: Modules description: 1. ASTDP (ASPEED DisplayPort) is controlled by dedicated AST-MCU (ASPEED propriatary MCU). 2. MCU is looping in charged of HPD, Read EDID, Link Training with DP sink. 3. ASTDP and AST-MUC reside in BMC (Baseboard Management controller) addressing-space. 4. ASPEED DRM driver requests MCU to get HPD and EDID by CR-scratched register. Booting sequence: 1. Check if TX is ASTDP // ast_dp_launch() 2. Check if DP-MCU FW has loaded // ast_dp_launch() 3. Read EDID // ast_dp_read_edid() 4. Resolution switch // ast_dp_SetOutput() V3: 1. Remove unneeded semicolon. 2. Apply to git://anongit.freedesktop.org/drm/drm, instead of git://anongit.freedesktop.org/drm/drm-misc 3. Resolve auto build test WARNINGs on V1 patch. V4: 1. Sync code-base with kernel 5.17_rc6 2. Remove the define of DPControlPower, because DP chips need to be powered on to be used. 3. Remove the switches of PHY and Display from EDID procedure. 4. Revise increaing delay to fixed delay, because this version kernel doesn't detect minitor consistenntly. 5. Create clean-up code used for reset of power state on errors with -EIO manner. 6. Revise the DP detection by TX type and its DP-FW status during booting and resume. 7. Correct the CamelCase Style. 8. Use register reading while needing, and remove to hold full register. 9. Instead of 'u8', revise to 'bool' on swwitch of PHY and video. 10.Correct typo 11.Remove the duplicated copy of TX definition. 12.Use EDID_LENGTH as the constant of 128. Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220428075603.20904-1-kuohsiang_chou@aspeedtech.com
2022-02-25Merge tag 'drm-misc-next-2022-02-23' of ↵Dave Airlie3-177/+331
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.18: UAPI Changes: Cross-subsystem Changes: - Split out panel-lvds and lvds dt bindings . - Put yes/no on/off disabled/enabled strings in linux/string_helpers.h and use it in drivers and tomoyo. - Clarify dma_fence_chain and dma_fence_array should never include eachother. - Flatten chains in syncobj's. - Don't double add in fbdev/defio when page is already enlisted. - Don't sort deferred-I/O pages by default in fbdev. Core Changes: - Fix missing pm_runtime_put_sync in bridge. - Set modifier support to only linear fb modifier if drivers don't advertise support. - As a result, we remove allow_fb_modifiers. - Add missing clear for EDID Deep Color Modes in drm_reset_display_info. - Assorted documentation updates. - Warn once in drm_clflush if there is no arch support. - Add missing select for dp helper in drm_panel_edp. - Assorted small fixes. - Improve fb-helper's clipping handling. - Don't dump shmem mmaps in a core dump. - Add accounting to ttm resource manager, and use it in amdgpu. - Allow querying the detected eDP panel through debugfs. - Add helpers for xrgb8888 to 8 and 1 bits gray. - Improve drm's buddy allocator. - Add selftests for the buddy allocator. Driver Changes: - Add support for nomodeset to a lot of drm drivers. - Use drm_module_*_driver in a lot of drm drivers. - Assorted small fixes to bridge/lt9611, v3d, vc4, vmwgfx, mxsfb, nouveau, bridge/dw-hdmi, panfrost, lima, ingenic, sprd, bridge/anx7625, ti-sn65dsi86. - Add bridge/it6505. - Create DP and DVI-I connectors in ast. - Assorted nouveau backlight fixes. - Rework amdgpu reset handling. - Add dt bindings for ingenic,jz4780-dw-hdmi. - Support reading edid through aux channel in ingenic. - Add a drm driver for Solomon SSD130x OLED displays. - Add simple support for sharp LQ140M1JW46. - Add more panels to nt35560. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/686ec871-e77f-c230-22e5-9e3bb80f064a@linux.intel.com
2022-02-11Merge tag 'drm-intel-next-2022-02-08' of ↵Dave Airlie2-5/+5
git://anongit.freedesktop.org/drm/drm-intel into drm-next Cross-subsystem Changes: ------------------------ dma-buf: - dma-buf-map: Rename to iosys-map (Lucas) Core Changes: ------------- drm: - Always include the debugfs_entry in drm_crtc (Ville) - Add orientation quirk for GPD Win Max (Anisse) Driver Changes: --------------- gvt: - Constify some pointers. (Rikard Falkeborn) - Use list_entry to access list members. (Guenter Roeck) - Fix cmd parser error for Passmark9. (Zhenyu Wang) i915: - Various clean-ups including headers and removing unused and unnecessary stuff\ (Jani, Hans, Andy, Ville) - Cleaning up on our registers definitions i915_reg.h (Matt) - More multi-FBC refactoring (Ville) - Baytrail backlight fix (Hans) - DG1 OPROM read through SPI controller (Clint) - ADL-N platform enabling (Tejas) - Fix slab-out-of-bounds access (Jani) - Add opregion mailbox #5 support for possible EDID override (Anisse) - Fix possible NULL dereferences (Harish) - Updates and fixes around display voltage swing values (Clint, Jose) - Fix RPM wekeref on PXP code (Juston) - Many register definitions clean-up, including planes registers (Ville) - More conversion towards display version over the old gen (Madhumitha, Ville) - DP MST ESI handling improvements (Jani) - drm device based logging conversions (Jani) - Prevent divide by zero (Dan) - Introduce ilk_pch_pre_enable for complete modeset abstraction (Ville) - Async flip optimization for DG2 (Stanislav) - Multiple DSC and bigjoiner fixes and improvements (Ville) - Fix ADL-P TypeC Phy ready status readout (Imre) - Fix up DP DFP 4:2:0 handling more display related fixes (Ville) - Display M/N cleanup (Ville) - Switch to use VGA definitions from video/vga.h (Jani) - Fixes and improvements to abstract CPU architecture (Lucas) - Disable unsused power wells left enabled by BIOS (Imre) - Allow !join_mbus cases for adlp+ dbuf configuration (Ville) - Populate pipe dbuf slices more accurately during readout (Ville) - Workaround broken BIOS DBUF configuration on TGL/RKL (Ville) - Fix trailing semicolon (Lucas) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YgKFLmCgpv4vQEa1@intel.com
2022-02-08drm/ast: Move SIL164-based connector code into separate helpersThomas Zimmermann2-2/+112
Add helpers for initializing SIL164-based connectors. These used to be handled by the VGA connector code. But SIL164 provides output via DVI-I, so set the encoder and connector types accordingly. If a SIL164 chip has been detected, ast will now create a DVI-I connector instead of a VGA connector. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-10-tzimmermann@suse.de
2022-02-08drm/ast: Move DP501-based connector code into separate helpersThomas Zimmermann2-23/+109
Add helpers for DP501-based connectors. DP501 provides output via DisplayPort. This used to be handled by the VGA connector code. If a DP501 chip has been detected, ast will now create a DisplayPort connector instead of a VGA connector. Remove the DP501 code from ast_vga_connector_helper_get_modes(). Also remove the call to drm_connector_update_edid_property(), which is performed by drm_get_edid(). Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-9-tzimmermann@suse.de
2022-02-08drm/ast: Read encoder possible-CRTC mask from drm_crtc_mask()Thomas Zimmermann1-1/+1
Read the encoder's possible-CRTC mask from the involved CRTC instead of hard-coding it. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-8-tzimmermann@suse.de
2022-02-08drm/ast: Initialize encoder and connector for VGA in helper functionThomas Zimmermann2-28/+42
Move encoder and connector initialization into a single helper and put all related mode-setting structures into a single place. Done in preparation of moving transmitter code into separate helpers. No functional changes. v2: * move encoder CRTC bitmask fix into separate patch (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-7-tzimmermann@suse.de
2022-02-08drm/ast: Rename struct ast_connector to struct ast_vga_connectorThomas Zimmermann2-28/+27
Prepare for introducing other connectors besides VGA. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-6-tzimmermann@suse.de
2022-02-08drm/ast: Remove unused value dp501_maxclkThomas Zimmermann3-63/+3
Remove reading the link-rate. The value is maintained by the connector code but never used. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-5-tzimmermann@suse.de
2022-02-08drm/ast: Remove AST_TX_ITE66121 constantThomas Zimmermann1-1/+0
The ITE66121 is an HDMI transmitter chip. There's no code for detecting or programming the chip within ast. Remove the enum constant. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-4-tzimmermann@suse.de
2022-02-08drm/ast: Move connector mode_valid function to CRTCThomas Zimmermann1-63/+66
The tests in ast_mode_valid() verify the correct resolution for the supplied mode. This is a limitation of the CRTC, so move the function to the CRTC helpers. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-3-tzimmermann@suse.de
2022-02-08drm/ast: Fail if connector initialization failsThomas Zimmermann1-5/+8
Update the connector code to fail if the connector could not be initialized. The current code just ignored the error and failed later when the connector was supposed to be used. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-2-tzimmermann@suse.de
2022-02-07dma-buf-map: Rename to iosys-mapLucas De Marchi2-5/+5
Rename struct dma_buf_map to struct iosys_map and corresponding APIs. Over time dma-buf-map grew up to more functionality than the one used by dma-buf: in fact it's just a shim layer to abstract system memory, that can be accessed via regular load and store, from IO memory that needs to be acessed via arch helpers. The idea is to extend this API so it can fulfill other needs, internal to a single driver. Example: in the i915 driver it's desired to share the implementation for integrated graphics, which uses mostly system memory, with discrete graphics, which may need to access IO memory. The conversion was mostly done with the following semantic patch: @r1@ @@ - struct dma_buf_map + struct iosys_map @r2@ @@ ( - DMA_BUF_MAP_INIT_VADDR + IOSYS_MAP_INIT_VADDR | - dma_buf_map_set_vaddr + iosys_map_set_vaddr | - dma_buf_map_set_vaddr_iomem + iosys_map_set_vaddr_iomem | - dma_buf_map_is_equal + iosys_map_is_equal | - dma_buf_map_is_null + iosys_map_is_null | - dma_buf_map_is_set + iosys_map_is_set | - dma_buf_map_clear + iosys_map_clear | - dma_buf_map_memcpy_to + iosys_map_memcpy_to | - dma_buf_map_incr + iosys_map_incr ) @@ @@ - #include <linux/dma-buf-map.h> + #include <linux/iosys-map.h> Then some files had their includes adjusted and some comments were update to remove mentions to dma-buf-map. Since this is not specific to dma-buf anymore, move the documentation to the "Bus-Independent Device Accesses" section. v2: - Squash patches v3: - Fix wrong removal of dma-buf.h from MAINTAINERS - Move documentation from dma-buf.rst to device-io.rst v4: - Change documentation title and level Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220204170541.829227-1-lucas.demarchi@intel.com
2022-02-01Merge tag 'drm-misc-next-2022-01-27' of ↵Dave Airlie3-17/+8
git://anongit.freedesktop.org/drm/drm-misc into drm-next [airlied: add two missing Kconfig] drm-misc-next for v5.18: UAPI Changes: - Fix invalid IN_FORMATS blob when plane->format_mod_supported is NULL. Cross-subsystem Changes: - Assorted dt bindings updates. - Fix vga16fb vga checking on x86. - Fix extra semicolon in rwsem.h's _down_write_nest_lock. - Assorted small fixes to agp and fbdev drivers. - Fix oops in creating a udmabuf with 0 pages. - Hot-unplug firmware fb devices on forced removal - Reqquest memory region in simplefb and simpledrm, and don't make the ioresource as busy. Core Changes: - Mock a drm_plane in drm-plane-helper selftest. - Assorted bug fixes to device logging, dbi. - Use DP helper for sink count in mst. - Assorted documentation fixes. - Assorted small fixes. - Move DP headers to drm/dp, and add a drm dp helper module. - Move the buddy allocator from i915 to common drm. - Add simple pci and platform module init macros to remove a lot of boilerplate from some drivers. - Support microsoft extension for HMDs and specialized monitors. - Improve edid parser's deep color handling. - Add type 7 timing support to edid parser. - Add a weak backpointer to the ttm_bo from ttm_resource - Add 3 eDP panels. Driver Changes: - Add support for HDMI and JZ4780 to ingenic. - Add support for higher DP/eDP bitrates to nouveau. - Assorted driver fixes to tilcdc, vmwgfx, sn65dsi83, meson, stm, panfrost, v3d, gma500, vc4, virtio, mgag200, ast, radeon, amdgpu, nouveau, various bridge drivers. - Convert and revert exynos dsi support to bridge driver. - Add vcc supply regulator support for sn65dsi83. - More conversion of bridge/chipone-icn6211 to atomic. - Remove conflicting fb's from stm, and add support for new hw version. - Add device link in parade-ps8640 to fix suspend/resume. - Update Boe-tv110c9m init sequence. - Add wide screen support to AST2600. - Fix omapdrm implicit dma_buf fencing. - Add support for multiple overlay planes to vkms. - Convert bridge/anx7625 to atomic, add HDCP support, add eld support for audio, and fix HPD. - Add driver for ChromeOS privacy screen. - Handover display from firmware to vc4 more gracefully, and support nomodeset. - Add flexible and ycbcr pixel formats to stm/ltdc. - Convert exynos mipi dsi to atomic. - Add initial dual core group GPUs support to panfrost. - No longer add exclusive fence in amdgpu as shared fence. - Add CSC and full range supoprt to vc4. - Shutdown the display on system shutdown and unbind. - Add Multi-Inno Technology MI0700S4T-6 simple panel. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/456a23c6-7324-7543-0c45-751f30ef83f7@linux.intel.com
2022-01-26Revert "drm/ast: Support 1600x900 with 108MHz PCLK"Dave Airlie1-2/+0
This reverts commit 9bb7b689274b67ecb3641e399e76f84adc627df1. This caused a regression reported to Red Hat. Fixes: 9bb7b689274b ("drm/ast: Support 1600x900 with 108MHz PCLK") Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220120040527.552068-1-airlied@gmail.com
2022-01-19drm/ast: Replace module-init boiler-plate code with DRM helpersThomas Zimmermann1-16/+2
Remove custom ast_init() and ast_exit() functions and initialize the module with DRM module helpers. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211222082831.196562-3-javierm@redhat.com
2022-01-19drm/ast: Create threshold values for AST2600KuoHsiang Chou1-1/+4
The threshold value is used for AST2600 only. Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220117083643.41493-1-kuohsiang_chou@aspeedtech.com
2022-01-10Merge tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drmLinus Torvalds5-143/+168
Pull drm updates from Dave Airlie: "Highlights are support for privacy screens found in new laptops, a bunch of nomodeset refactoring, and i915 enables ADL-P systems by default, while starting to add RPL-S support. vmwgfx adds GEM and support for OpenGL 4.3 features in userspace. Lots of internal refactorings around dma reservations, and lots of driver refactoring as well. Summary: core: - add privacy screen support - move nomodeset option into drm subsystem - clean up nomodeset handling in drivers - make drm_irq.c legacy - fix stack_depot name conflicts - remove DMA_BUF_SET_NAME ioctl restrictions - sysfs: send hotplug event - replace several DRM_* logging macros with drm_* - move hashtable to legacy code - add error return from gem_create_object - cma-helper: improve interfaces, drop CONFIG_DRM_KMS_CMA_HELPER - kernel.h related include cleanups - support XRGB2101010 source buffers ttm: - don't include drm hashtable - stop pruning fences after wait - documentation updates dma-buf: - add dma_resv selftest - add debugfs helpers - remove dma_resv_get_excl_unlocked - documentation - make fences mandatory in dma_resv_add_excl_fence dp: - add link training delay helpers gem: - link shmem/cma helpers into separate modules - use dma_resv iteratior - import dma-buf namespace into gem helper modules scheduler: - fence grab fix - lockdep fixes bridge: - switch to managed MIPI DSI helpers - register and attach during probe fixes - convert to YAML in several places. panel: - add bunch of new panesl simpledrm: - support FB_DAMAGE_CLIPS - support virtual screen sizes - add Apple M1 support amdgpu: - enable seamless boot for DCN 3.01 - runtime PM fixes - use drm_kms_helper_connector_hotplug_event - get all fences at once - use generic drm fb helpers - PSR/DPCD/LTTPR/DSC/PM/RAS/OLED/SRIOV fixes - add smart trace buffer (STB) for supported GPUs - display debugfs entries - new SMU debug option - Documentation update amdkfd: - IP discovery enumeration refactor - interface between driver fixes - SVM fixes - kfd uapi header to define some sysfs bitfields. i915: - support VESA panel backlights - enable ADL-P by default - add eDP privacy screen support - add Raptor Lake S (RPL-S) support - DG2 page table support - lots of GuC/HuC fw refactoring - refactored i915->gt interfaces - CD clock squashing support - enable 10-bit gamma support - update ADL-P DMC fw to v2.14 - enable runtime PM autosuspend by default - ADL-P DSI support - per-lane DP drive settings for ICL+ - add support for pipe C/D DMC firmware - Atomic gamma LUT updates - remove CCS FB stride restrictions on ADL-P - VRR platform support for display 11 - add support for display audio codec keepalive - lots of display refactoring - fix runtime PM handling during PXP suspend - improved eviction performance with async TTM moves - async VMA unbinding improvements - VMA locking refactoring - improved error capture robustness - use per device iommu checks - drop bits stealing from i915_sw_fence function ptr - remove dma_resv_prune - add IC cache invalidation on DG2 nouveau: - crc fixes - validate LUTs in atomic check - set HDMI AVI RGB quant to full tegra: - buffer objects reworks for dma-buf compat - NVDEC driver uAPI support - power management improvements etnaviv: - IOMMU enabled system support - fix > 4GB command buffer mapping - close a DoS vector - fix spurious GPU resets ast: - fix i2c initialization rcar-du: - DSI output support exynos: - replace legacy gpio interface - implement generic GEM object mmap msm: - dpu plane state cleanup in prep for multirect - dpu debugfs cleanups - dp support for sc7280 - a506 support - removal of struct_mutex - remove old eDP sub-driver anx7625: - support MIPI DSI input - support HDMI audio - fix reading EDID lvds: - fix bridge DT bindings megachips: - probe both bridges before registering dw-hdmi: - allow interlace on bridge ps8640: - enable runtime PM - support aux-bus tx358768: - enable reference clock - add pulse mode support ti-sn65dsi86: - use regmap bulk write - add PWM support etnaviv: - get all fences at once gma500: - gem object cleanups kmb: - enable fb console radeon: - use dma_resv_wait_timeout rockchip: - add DSP hold timeout - suspend/resume fixes - PLL clock fixes - implement mmap in GEM object functions - use generic fbdev emulation sun4i: - use CMA helpers without vmap support vc4: - fix HDMI-CEC hang with display is off - power on HDMI controller while disabling - support 4K@60Hz modes - support 10-bit YUV 4:2:0 output vmwgfx: - fix leak on probe errors - fail probing on broken hosts - new placement for MOB page tables - hide internal BOs from userspace - implement GEM support - implement GL 4.3 support virtio: - overflow fixes xen: - implement mmap as GEM object function omapdrm: - fix scatterlist export - support virtual planes mediatek: - MT8192 support - CMDQ refinement" * tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drm: (1241 commits) drm/amdgpu: no DC support for headless chips drm/amd/display: fix dereference before NULL check drm/amdgpu: always reset the asic in suspend (v2) drm/amdgpu: put SMU into proper state on runpm suspending for BOCO capable platform drm/amd/display: Fix the uninitialized variable in enable_stream_features() drm/amdgpu: fix runpm documentation amdgpu/pm: Make sysfs pm attributes as read-only for VFs drm/amdgpu: save error count in RAS poison handler drm/amdgpu: drop redundant semicolon drm/amd/display: get and restore link res map drm/amd/display: support dynamic HPO DP link encoder allocation drm/amd/display: access hpo dp link encoder only through link resource drm/amd/display: populate link res in both detection and validation drm/amd/display: define link res and make it accessible to all link interfaces drm/amd/display: 3.2.167 drm/amd/display: [FW Promotion] Release 0.0.98 drm/amd/display: Undo ODM combine drm/amd/display: Add reg defs for DCN303 drm/amd/display: Changed pipe split policy to allow for multi-display pipe split drm/amd/display: Set optimize_pwr_state for DCN31 ...
2022-01-06drm/ast: Enable the supporting of wide screen on AST2600KuoHsiang Chou1-0/+2
Enable the supporting of wide sscreen on AST2600, so that the resolution of 16:9 and 16:10 are able to be selected on Display Settings. Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20211229082749.5415-1-kuohsiang_chou@aspeedtech.com
2021-12-16drm/ast: Move I2C code into separate source fileThomas Zimmermann4-129/+156
Move I2C code into its own source file. Makes the mode-setting code a little less convoluted. v3: * fix SPDX tag to say 'SPDX-License-Identifier' Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211206091125.29501-4-tzimmermann@suse.de
2021-12-16drm/ast: Convert I2C code to managed cleanupThomas Zimmermann1-20/+16
Release the I2C adapter as part of the DRM device cleanup. Remove ast's dedicated helper for struct drm_connector_funcs.destroy. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211206091125.29501-3-tzimmermann@suse.de
2021-12-16drm/ast: Handle failed I2C initialization gracefullyThomas Zimmermann1-7/+10
I2C initialization is allowed to fail. In this case, create a connector without DDC adapter. The current code would dereference a NULL pointer. Reading the modes from the connector is supposed to work without I2C adapter. Add the respective test. v2: * init edid to NULL to avoid uninitialized read (Dan) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211206091125.29501-2-tzimmermann@suse.de
2021-12-14drm/ast: potential dereference of null pointerJiasheng Jiang1-1/+4
The return value of kzalloc() needs to be checked. To avoid use of null pointer '&ast_state->base' in case of the failure of alloc. Fixes: f0adbc382b8b ("drm/ast: Allocate initial CRTC state of the correct size") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20211214014126.2211535-1-jiasheng@iscas.ac.cn
2021-11-27drm: Move nomodeset kernel parameter to the DRM subsystemJavier Martinez Canillas1-2/+1
The "nomodeset" kernel cmdline parameter is handled by the vgacon driver but the exported vgacon_text_force() symbol is only used by DRM drivers. It makes much more sense for the parameter logic to be in the subsystem of the drivers that are making use of it. Let's move the vgacon_text_force() function and related logic to the DRM subsystem. While doing that, rename it to drm_firmware_drivers_only() and make it return true if "nomodeset" was used and false otherwise. This is a better description of the condition that the drivers are testing for. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211112133230.1595307-4-javierm@redhat.com
2021-10-28BackMerge tag 'v5.15-rc7' into drm-nextDave Airlie1-17/+1
The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in. Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-22Revert "drm/ast: Add detect function support"Kim Phillips1-17/+1
This reverts commit aae74ff9caa8de9a45ae2e46068c417817392a26, since it prevents my AMD Milan system from booting, with: [ 27.189558] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 27.197506] #PF: supervisor write access in kernel mode [ 27.203333] #PF: error_code(0x0002) - not-present page [ 27.209064] PGD 0 P4D 0 [ 27.211885] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 27.216744] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.0-rc6+ #15 [ 27.223928] Hardware name: AMD Corporation ETHANOL_X/ETHANOL_X, BIOS RXM1006B 08/20/2021 [ 27.232955] RIP: 0010:run_timer_softirq+0x38b/0x4a0 [ 27.238397] Code: 4c 89 f7 e8 37 27 ac 00 49 c7 46 08 00 00 00 00 49 8b 04 24 48 85 c0 74 71 4d 8b 3c 24 4d 89 7e 08 66 90 49 8b 07 49 8b 57 08 <48> 89 02 48 85 c0 74 04 48 89 50 08 49 8b 77 18 41 f6 47 22 20 4c [ 27.259350] RSP: 0018:ffffc42d00003ee8 EFLAGS: 00010086 [ 27.265176] RAX: dead000000000122 RBX: 0000000000000000 RCX: 0000000000000101 [ 27.273134] RDX: 0000000000000000 RSI: 0000000000000087 RDI: 0000000000000001 [ 27.281084] RBP: ffffc42d00003f70 R08: 0000000000000000 R09: 00000000000003eb [ 27.289043] R10: ffffa0860cb300d0 R11: ffffa0c44de290b0 R12: ffffc42d00003ef8 [ 27.297002] R13: 00000000fffef200 R14: ffffa0c44de18dc0 R15: ffffa0867a882350 [ 27.304961] FS: 0000000000000000(0000) GS:ffffa0c44de00000(0000) knlGS:0000000000000000 [ 27.313988] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.320396] CR2: 0000000000000000 CR3: 000000014569c001 CR4: 0000000000770ef0 [ 27.328346] PKRU: 55555554 [ 27.331359] Call Trace: [ 27.334073] <IRQ> [ 27.336314] ? __queue_work+0x420/0x420 [ 27.340589] ? lapic_next_event+0x21/0x30 [ 27.345060] ? clockevents_program_event+0x8f/0xe0 [ 27.350402] __do_softirq+0xfb/0x2db [ 27.354388] irq_exit_rcu+0x98/0xd0 [ 27.358275] sysvec_apic_timer_interrupt+0xac/0xd0 [ 27.363620] </IRQ> [ 27.365955] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 27.371685] RIP: 0010:cpuidle_enter_state+0xcc/0x390 [ 27.377292] Code: 3d 01 79 0a 50 e8 44 ed 77 ff 49 89 c6 0f 1f 44 00 00 31 ff e8 f5 f8 77 ff 80 7d d7 00 0f 85 e6 01 00 00 fb 66 0f 1f 44 00 00 <45> 85 ff 0f 88 17 01 00 00 49 63 c7 4c 2b 75 c8 48 8d 14 40 48 8d [ 27.398243] RSP: 0018:ffffffffb0e03dc8 EFLAGS: 00000246 [ 27.404069] RAX: ffffa0c44de00000 RBX: 0000000000000001 RCX: 000000000000001f [ 27.412028] RDX: 0000000000000000 RSI: ffffffffb0bafc1f RDI: ffffffffb0bbdb81 [ 27.419986] RBP: ffffffffb0e03e00 R08: 00000006549f8f3f R09: ffffffffb1065200 [ 27.427935] R10: ffffa0c44de27ae4 R11: ffffa0c44de27ac4 R12: ffffa0c5634cb000 [ 27.435894] R13: ffffffffb1065200 R14: 00000006549f8f3f R15: 0000000000000001 [ 27.443854] ? cpuidle_enter_state+0xbb/0x390 [ 27.448712] cpuidle_enter+0x2e/0x40 [ 27.452695] call_cpuidle+0x23/0x40 [ 27.456584] do_idle+0x1f0/0x270 [ 27.460181] cpu_startup_entry+0x20/0x30 [ 27.464553] rest_init+0xd4/0xe0 [ 27.468149] arch_call_rest_init+0xe/0x1b [ 27.472619] start_kernel+0x6bc/0x6e2 [ 27.476764] x86_64_start_reservations+0x24/0x26 [ 27.481912] x86_64_start_kernel+0x75/0x79 [ 27.486477] secondary_startup_64_no_verify+0xb0/0xbb [ 27.492111] Modules linked in: kvm_amd(+) kvm ipmi_si(+) ipmi_devintf rapl wmi_bmof ipmi_msghandler input_leds ccp k10temp mac_hid sch_fq_codel msr ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear ast i2c_algo_bit drm_vram_helper drm_ttm_helper ttm drm_kms_helper crct10dif_pclmul crc32_pclmul ghash_clmulni_intel syscopyarea aesni_intel sysfillrect crypto_simd sysimgblt fb_sys_fops cryptd hid_generic cec nvme ahci usbhid drm e1000e nvme_core hid libahci i2c_piix4 wmi [ 27.551789] CR2: 0000000000000000 [ 27.555482] ---[ end trace 897987dfe93dccc6 ]--- [ 27.560630] RIP: 0010:run_timer_softirq+0x38b/0x4a0 [ 27.566069] Code: 4c 89 f7 e8 37 27 ac 00 49 c7 46 08 00 00 00 00 49 8b 04 24 48 85 c0 74 71 4d 8b 3c 24 4d 89 7e 08 66 90 49 8b 07 49 8b 57 08 <48> 89 02 48 85 c0 74 04 48 89 50 08 49 8b 77 18 41 f6 47 22 20 4c [ 27.587021] RSP: 0018:ffffc42d00003ee8 EFLAGS: 00010086 [ 27.592848] RAX: dead000000000122 RBX: 0000000000000000 RCX: 0000000000000101 [ 27.600808] RDX: 0000000000000000 RSI: 0000000000000087 RDI: 0000000000000001 [ 27.608765] RBP: ffffc42d00003f70 R08: 0000000000000000 R09: 00000000000003eb [ 27.616716] R10: ffffa0860cb300d0 R11: ffffa0c44de290b0 R12: ffffc42d00003ef8 [ 27.624673] R13: 00000000fffef200 R14: ffffa0c44de18dc0 R15: ffffa0867a882350 [ 27.632624] FS: 0000000000000000(0000) GS:ffffa0c44de00000(0000) knlGS:0000000000000000 [ 27.641650] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.648159] CR2: 0000000000000000 CR3: 000000014569c001 CR4: 0000000000770ef0 [ 27.656119] PKRU: 55555554 [ 27.659133] Kernel panic - not syncing: Fatal exception in interrupt [ 29.030411] Shutting down cpus with NMI [ 29.034699] Kernel Offset: 0x2e600000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 29.046790] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Since unreliable, found by bisecting for KASAN's use-after-free in enqueue_timer+0x4f/0x1e0, where the timer callback is called. Reported-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Kim Phillips <kim.phillips@amd.com> Fixes: aae74ff9caa8 ("drm/ast: Add detect function support") Link: https://lore.kernel.org/lkml/0f7871be-9ca6-5ae4-3a40-5db9a8fb2365@amd.com/ Cc: Ainux <ainux.wang@gmail.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: sterlingteng@gmail.com Cc: chenhuacai@kernel.org Cc: Chuck Lever III <chuck.lever@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Jon Grimm <jon.grimm@amd.com> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: linux-kernel <linux-kernel@vger.kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211021153006.92983-1-kim.phillips@amd.com
2021-09-23drm/ast: Use managed interfaces for framebuffer write combiningThomas Zimmermann2-19/+10
Replace arch_phys_wc_add() and arch_io_reserve_memtype_wc() with the rsp managed functions. Allows for removing the cleanup code for memory management Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210916181601.9146-4-tzimmermann@suse.de
2021-08-08drm/ast: Use offset-adjusted shadow-plane mappingsThomas Zimmermann1-1/+1
For framebuffers with non-zero offset fields, shadow-plane helpers provide a pointer to the first byte of the contained data. Use it in ast. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-3-tzimmermann@suse.de
2021-08-01DRM: ast: Fixed coding style issues of ast_mode.cGregory Williams1-11/+20
Removed space before comma, fixed if statements by putting trailing statements on new line, fixed unsigned int declaration, and removed not needed else statement after return. Signed-off-by: Gregory Williams <gregwills85@gmail.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210731005328.GA19016@devbox
2021-07-20drm/ast: Disable fast reset after DRAM initialKuoHsiang Chou3-26/+76
[Bug][AST2500] V1: When AST2500 acts as stand-alone VGA so that DRAM and DVO initialization have to be achieved by VGA driver with P2A (PCI to AHB) enabling. However, HW suggests disable Fast reset mode after DRAM initializaton, because fast reset mode is mainly designed for ARM ICE debugger. Once Fast reset is checked as enabling, WDT (Watch Dog Timer) should be first enabled to avoid system deadlock before disable fast reset mode. V2: Use to_pci_dev() to get revision of PCI configuration. V3: If SCU00 is not unlocked, just enter its password again. It is unnecessary to clear AHB lock condition and restore WDT default setting again, before Fast-reset clearing. V4: repatch after "error : could not build fake ancestor" resolved. V5: Since CVE_2019_6260 item3, Most of AST2500 have disabled P2A(PCIe to AMBA). However, for backward compatibility, some patches about P2A, such as items of v5.2 and v5.3, are considered to be upstreamed with comments. 1. Add define macro to improve source readability. ast_drv.h, ast_main.c, ast_post.c 2. Add comment about "Fast restet" is enabled for ARM-ICE debugger ast_post.c 3. Add comment about Reset USB port to patch USB unknown device issue ast_post.c Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210709080900.4056-1-kuohsiang_chou@aspeedtech.com
2021-07-20drm/ast: Zero is missing in detect functionAinux.Wang1-1/+1
The function ast_get_modes() will also return 0, when it try to get the edid, but it also do not get the edid. Signed-off-by: Ainux.Wang <ainux.wang@gmail.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210716015615.9150-1-ainux.wang@gmail.com
2021-07-01drm/aperture: Pass DRM driver structure instead of driver nameThomas Zimmermann1-1/+1
Print the name of the DRM driver when taking over fbdev devices. Makes the output to dmesg more consistent. Note that the driver name is only used for printing a string to the kernel log. No UAPI is affected by this change. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Nirmoy Das <nirmoy.das@amd.com> Acked-by: Chen-Yu Tsai <wens@csie.org> # sun4i Acked-by: Neil Armstrong <narmstrong@baylibre.com> # meson Link: https://patchwork.freedesktop.org/patch/msgid/20210629135833.22679-1-tzimmermann@suse.de
2021-06-24drm/vram-helpers: Create DRM_GEM_VRAM_PLANE_HELPER_FUNCSDaniel Vetter1-2/+1
Like we have for the shadow helpers too, and roll it out to drivers. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Tian Tao <tiantao6@hisilicon.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-11-daniel.vetter@ffwll.ch
2021-06-15drm/ast: Add detect function supportAinux1-1/+17
The existence of the connector cannot be detected, so add the detect function to support. Signed-off-by: Ainux <ainux.wang@gmail.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210526111515.40015-1-ainux.wang@gmail.com
2021-04-29drm/ast: Remove reference to struct drm_device.pdevThomas Zimmermann1-3/+2
Using struct drm_device.pdev is deprecated. Upcast with to_pci_dev() from struct drm_device.dev to get the PCI device structure. v9: * fix remaining pdev references Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Fixes: ba4e0339a6a3 ("drm/ast: Fixed CVE for DP501") Cc: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Cc: kernel test robot <lkp@intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20210429105101.25667-2-tzimmermann@suse.de
2021-04-27drm/ast: Fixed CVE for DP501KuoHsiang Chou3-37/+125
[Bug][DP501] If ASPEED P2A (PCI to AHB) bridge is disabled and disallowed for CVE_2019_6260 item3, and then the monitor's EDID is unable read through Parade DP501. The reason is the DP501's FW is mapped to BMC addressing space rather than Host addressing space. The resolution is that using "pci_iomap_range()" maps to DP501's FW that stored on the end of FB (Frame Buffer). In this case, FrameBuffer reserves the last 2MB used for the image of DP501. Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210421085859.17761-1-kuohsiang_chou@aspeedtech.com
2021-04-26drm/ast: Fix missing conversions to managed APITakashi Iwai1-2/+2
The commit 7cbb93d89838 ("drm/ast: Use managed pci functions") converted a few PCI accessors to the managed API and dropped the manual pci_iounmap() calls, but it seems to have forgotten converting pci_iomap() to the managed one. It resulted in the leftover resources after the driver unbind. Let's fix them. Fixes: 7cbb93d89838 ("drm/ast: Use managed pci functions") Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210421170458.21178-1-tiwai@suse.de
2021-04-14drm/aperture: Convert drivers to aperture interfacesThomas Zimmermann1-13/+10
Mass-convert all drivers from FB helpers to aperture interfaces. No functional changes besides checking for returned errno codes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210412131043.5787-3-tzimmermann@suse.de
2021-02-25drm: Use state helper instead of the plane state pointerMaxime Ripard1-2/+4
Many drivers reference the plane->state pointer in order to get the current plane state in their atomic_update or atomic_disable hooks, which would be the new plane state in the global atomic state since _swap_state happened when those hooks are run. Use the drm_atomic_get_new_plane_state helper to get that state to make it more obvious. This was made using the coccinelle script below: @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; ) @ adds_new_state @ identifier plane_atomic_func.func; identifier plane, state; identifier new_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... - struct drm_plane_state *new_state = plane->state; + struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane); ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech
2021-02-25drm/atomic: Pass the full state to planes atomic disable and updateMaxime Ripard1-4/+8
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert the remaining helpers to provide a consistent interface, this time with the planes atomic_update and atomic_disable. The conversion was done using the coccinelle script below, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_update)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_disable)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; ) @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier crtc_state; identifier plane, plane_state, state; expression e; @@ f(struct drm_crtc_state *crtc_state) { ... struct drm_atomic_state *state = e; <+... ( - FUNCS->atomic_disable(plane, plane_state) + FUNCS->atomic_disable(plane, state) | - FUNCS->atomic_update(plane, plane_state) + FUNCS->atomic_update(plane, state) ) ...+> } @@ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state) + struct drm_plane_state *old_plane_state) { <... - state + old_plane_state ...> } @ ignores_old_state @ identifier plane_atomic_func.func; identifier plane, old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... when != old_state } @ adds_old_state depends on plane_atomic_func && !ignores_old_state @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *plane_state) { + struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); <+... - plane_state->state + state ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-9-maxime@cerno.tech
2021-02-24drm: Rename plane->state variables in atomic update and disableMaxime Ripard1-15/+15
Some drivers are storing the plane->state pointer in atomic_update and atomic_disable in a variable simply called state, while the state passed as an argument is called old_state. In order to ease subsequent reworks and to avoid confusing or inconsistent names, let's rename those variables to new_state. This was done using the following coccinelle script, plus some manual changes for mtk and tegra. @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; ) @ moves_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... - struct drm_plane_state *state = plane->state; + struct drm_plane_state *new_state = plane->state; ... } @ depends on moves_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; identifier old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { <... - state + new_state ...> } @ moves_new_state_oldstate @ identifier plane_atomic_func.func; identifier plane; symbol oldstate; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *oldstate) { ... - struct drm_plane_state *state = plane->state; + struct drm_plane_state *newstate = plane->state; ... } @ depends on moves_new_state_oldstate @ identifier plane_atomic_func.func; identifier plane; identifier old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { <... - state + newstate ...> } @ moves_new_state_old_pstate @ identifier plane_atomic_func.func; identifier plane; symbol old_pstate; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_pstate) { ... - struct drm_plane_state *state = plane->state; + struct drm_plane_state *new_pstate = plane->state; ... } @ depends on moves_new_state_old_pstate @ identifier plane_atomic_func.func; identifier plane; identifier old_pstate; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_pstate) { <... - state + new_pstate ...> } Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-8-maxime@cerno.tech
2021-02-24drm: Use the state pointer directly in planes atomic_checkMaxime Ripard1-2/+2
Now that atomic_check takes the global atomic state as a parameter, we don't need to go through the pointer in the plane state. This was done using the following coccinelle script: @ plane_atomic_func @ identifier helpers; identifier func; @@ static struct drm_plane_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... - struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); <... when != plane_state - plane_state->state + state ...> } @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); <... - plane_state->state + state ...> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-5-maxime@cerno.tech
2021-02-24drm/atomic: Pass the full state to planes atomic_checkMaxime Ripard1-2/+6
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert all the remaining helpers to provide a consistent interface, starting with the planes atomic_check. The conversion was done using the coccinelle script below plus some manual changes for vmwgfx, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... int (*atomic_check)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ static const struct drm_plane_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier dev; identifier plane, plane_state, state; @@ f(struct drm_device *dev, struct drm_atomic_state *state) { <+... - FUNCS->atomic_check(plane, plane_state) + FUNCS->atomic_check(plane, state) ...+> } @ ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { ... when != new_plane_state } @ adds_new_state depends on plane_atomic_func && !ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *new_plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-4-maxime@cerno.tech
2021-02-24drm: Rename plane atomic_check state namesMaxime Ripard1-12/+14
Most drivers call the argument to the plane atomic_check hook simply state, which is going to conflict with the global atomic state in a later rework. Let's rename it to new_plane_state (or new_state depending on the convention used in the driver). This was done using the coccinelle script below, and built tested: @ plane_atomic_func @ identifier helpers; identifier func; @@ static const struct drm_plane_helper_funcs helpers = { .atomic_check = func, }; @ has_old_state @ identifier plane_atomic_func.func; identifier plane; expression e; symbol old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... struct drm_plane_state *old_state = e; ... } @ depends on has_old_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state + struct drm_plane_state *new_state ) { <+... - state + new_state ...+> } @ has_state @ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... } @ depends on has_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state + struct drm_plane_state *new_plane_state ) { <+... - state + new_plane_state ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-2-maxime@cerno.tech
2021-02-22drm/ast: fix memory leak when unload the driverTong Zhang1-0/+2
a connector is leaked upon module unload, it seems that we should do similar to sample driver as suggested in drm_drv.c. Adding drm_atomic_helper_shutdown() in ast_pci_remove to prevent leaking. [ 153.822134] WARNING: CPU: 0 PID: 173 at drivers/gpu/drm/drm_mode_config.c:504 drm_mode_config_cle0 [ 153.822698] Modules linked in: ast(-) drm_vram_helper drm_ttm_helper ttm [last unloaded: ttm] [ 153.823197] CPU: 0 PID: 173 Comm: modprobe Tainted: G W 5.11.0-03615-g55f62bc873474 [ 153.823708] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-4 [ 153.824333] RIP: 0010:drm_mode_config_cleanup+0x418/0x470 [ 153.824637] Code: 0c 00 00 00 00 48 8b 84 24 a8 00 00 00 65 48 33 04 25 28 00 00 00 75 65 48 81 c0 [ 153.825668] RSP: 0018:ffff888103c9fb70 EFLAGS: 00010212 [ 153.825962] RAX: ffff888102b0d100 RBX: ffff888102b0c298 RCX: ffffffff818d8b2b [ 153.826356] RDX: dffffc0000000000 RSI: 000000007fffffff RDI: ffff888102b0c298 [ 153.826748] RBP: ffff888103c9fba0 R08: 0000000000000001 R09: ffffed1020561857 [ 153.827146] R10: ffff888102b0c2b7 R11: ffffed1020561856 R12: ffff888102b0c000 [ 153.827538] R13: ffff888102b0c2d8 R14: ffff888102b0c2d8 R15: 1ffff11020793f70 [ 153.827935] FS: 00007f24bff456a0(0000) GS:ffff88815b400000(0000) knlGS:0000000000000000 [ 153.828380] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 153.828697] CR2: 0000000001c39018 CR3: 0000000103c90000 CR4: 00000000000006f0 [ 153.829096] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 153.829486] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 153.829883] Call Trace: [ 153.830024] ? drmm_mode_config_init+0x930/0x930 [ 153.830281] ? cpumask_next+0x16/0x20 [ 153.830488] ? mnt_get_count+0x66/0x80 [ 153.830699] ? drm_mode_config_cleanup+0x470/0x470 [ 153.830972] drm_managed_release+0xed/0x1c0 [ 153.831208] drm_dev_release+0x3a/0x50 [ 153.831420] release_nodes+0x39e/0x410 [ 153.831631] ? devres_release+0x40/0x40 [ 153.831852] device_release_driver_internal+0x158/0x270 [ 153.832143] driver_detach+0x76/0xe0 [ 153.832344] bus_remove_driver+0x7e/0x100 [ 153.832568] pci_unregister_driver+0x28/0xf0 [ 153.832821] __x64_sys_delete_module+0x268/0x300 [ 153.833086] ? __ia32_sys_delete_module+0x300/0x300 [ 153.833357] ? call_rcu+0x372/0x4f0 [ 153.833553] ? fpregs_assert_state_consistent+0x4d/0x60 [ 153.833840] ? exit_to_user_mode_prepare+0x2f/0x130 [ 153.834118] do_syscall_64+0x33/0x40 [ 153.834317] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 153.834597] RIP: 0033:0x7f24bfec7cf7 [ 153.834797] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d6 41 [ 153.835812] RSP: 002b:00007fff72e6cb58 EFLAGS: 00000202 ORIG_RAX: 00000000000000b0 [ 153.836234] RAX: ffffffffffffffda RBX: 00007f24bff45690 RCX: 00007f24bfec7cf7 [ 153.836623] RDX: 00000000ffffffff RSI: 0000000000000080 RDI: 0000000001c2fb10 [ 153.837018] RBP: 0000000001c2fac0 R08: 2f2f2f2f2f2f2f2f R09: 0000000001c2fac0 [ 153.837408] R10: fefefefefefefeff R11: 0000000000000202 R12: 0000000001c2fac0 [ 153.837798] R13: 0000000001c2f9d0 R14: 0000000000000000 R15: 0000000000000001 [ 153.838194] ---[ end trace b92031513bbe596c ]--- [ 153.838441] [drm:drm_mode_config_cleanup] *ERROR* connector VGA-1 leaked! Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210222023322.984885-1-ztong0001@gmail.com
2021-02-17drm/ast: Move all of the cursor-update functionality to atomic_updateThomas Zimmermann1-44/+22
We used to update the cursor image in prepare_fb. Move all this code to atomic_update (where it belongs). The generic helper for shadow-buffered planes now implement the cursor plane's prepare_fb. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-11-tzimmermann@suse.de
2021-02-17drm/ast: Store each HW cursor offset after pinning the rsp BOThomas Zimmermann2-10/+12
As HW cursor BOs never move, we can store the offset in VRAM in the cursor-plane's HWC state. This removes the last possible source of runtime errors from atomic_update. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-10-tzimmermann@suse.de
2021-02-17drm/ast: Map HW cursor BOs permanentlyThomas Zimmermann2-17/+16
The BOs of the hardware cursor are now mapped permanently while the cursor plane is being used. This reduces the CPU overhead of the cursor plane's atomic_update function. The change also resolves a problem with the vmap call in the commit tail. The vmap implementation could acquire the DMA reservation lock on the BO, which is not allowed that late in the atomic update. Removing the vmap call from atomic_update fixes the issue. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-9-tzimmermann@suse.de
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-25 07:48:10 +0000