summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)AuthorFilesLines
2019-08-07Revert "drm/amdkfd: New IOCTL to allocate queue GWS"Alex Deucher1-28/+0
This reverts commit 1a058c3376765ee31d65e28cbbb9d4ff15120056. This interface is still in too much flux. Revert until it's sorted out. Acked-by: Oak Zeng <Oak.Zeng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-06Revert "drm/amdgpu: fix transform feedback GDS hang on gfx10 (v2)"Marek Olšák2-12/+1
This reverts commit 9ed2c993d723129f85101e51b2ccc36ef5400a67. SET_CONFIG_REG writes to memory if register shadowing is enabled, causing a VM fault. NGG streamout is unstable anyway, so all UMDs should use legacy streamout. I think Mesa is the only driver using NGG streamout. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Reviewed-by: Le Ma <Le.Ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-06drm/amdgpu: pin the csb buffer on hw init for gfx v8Likun Gao1-0/+40
Without this pin, the csb buffer will be filled with inconsistent data after S3 resume. And that will causes gfx hang on gfxoff exit since this csb will be executed then. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Tested-by: Paul Gover <pmw.gover@yahoo.co.uk> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-02drm/amd/powerplay: correct navi10 vcn powergateEvan Quan3-9/+19
vcn dpm on is a prerequisite for vcn power gate control. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-02drm/amd/powerplay: honor hw limit on fetching metrics data for navi10Kevin Wang1-18/+38
too frequently to update mertrics table will cause smu internal error. Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-02drm/amd/powerplay: Allow changing of fan_control in smu_v11_0Matt Coffin1-1/+1
[Why] Before this change, the fan control state on smu_v11 was not able to be changed because the capability check for checking if the fan control capability existed was inverted. [How] The capability check for fan control in smu_v11_0_auto_fan_control was inverted, to correctly check for the absence, instead of presence of fan control capabilities. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Matt Coffin <mcoffin13@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-02drm/amd/amdgpu/vcn_v2_0: Move VCN 2.0 specific dec ring test to vcn_v2_0Thong Thai1-1/+31
VCN 2.0 firmware now requires a packet start command to be sent before any other decode ring buffer command. Signed-off-by: Thong Thai <thong.thai@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-02drm/amd/amdgpu/vcn_v2_0: Mark RB commands as KMD commandsThong Thai2-6/+7
Sets the CMD_SOURCE bit for VCN 2.0 Decoder Ring Buffer commands. This bit was previously set by the RBC HW on older firmware. Newer firmware uses a SW RBC and this bit has to be set by the driver. Signed-off-by: Thong Thai <thong.thai@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-02Merge tag 'drm-fixes-5.3-2019-07-31' of ↵Dave Airlie11-107/+150
git://people.freedesktop.org/~agd5f/linux into drm-fixes drm-fixes-5.3-2019-07-31: amdgpu: - Fix temperature granularity for navi - Fix stable pstate setting for navi - Fix VCN DPM enablement on navi - Fix error handling on CS ioctl when processing dependencies - Fix possible information leak in debugfs amdkfd: - fix memory alignment for VegaM Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190731191648.25729-1-alexander.deucher@amd.com
2019-07-31drm/amd/powerplay: correct UVD/VCE/VCN power status retrievalEvan Quan1-20/+36
VCN should be used for Vega20 later ASICs while UVD and VCE are for previous ASICs. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-31drm/amd/powerplay: correct Navi10 VCN powergate control (v2)Evan Quan1-18/+10
No VCN DPM bit check as that's different from VCN PG. Also no extra check for possible double enablement/disablement as that's already done by VCN. v2: check return value of smu_feature_set_enabled Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-31drm/amd/powerplay: support VCN powergate status retrieval for SW SMUEvan Quan1-0/+4
Commonly used for VCN powergate status retrieval for SW SMU. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-31drm/amd/powerplay: support VCN powergate status retrieval on RavenEvan Quan1-0/+9
Enable VCN powergate status report on Raven. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-31drm/amd/powerplay: add new sensor type for VCN powergate statusEvan Quan1-0/+1
VCN is widely used in new ASICs and different from tranditional UVD and VCE. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-31drm/amdgpu: fix a potential information leaking bugWang Xiayang1-1/+1
Coccinelle reports a path that the array "data" is never initialized. The path skips the checks in the conditional branches when either of callback functions, read_wave_vgprs and read_wave_sgprs, is not registered. Later, the uninitialized "data" array is read in the while-loop below and passed to put_user(). Fix the path by allocating the array with kcalloc(). The patch is simplier than adding a fall-back branch that explicitly calls memset(data, 0, ...). Also it does not need the multiplication 1024*sizeof(*data) as the size parameter for memset() though there is no risk of integer overflow. Signed-off-by: Wang Xiayang <xywang.sjtu@sjtu.edu.cn> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-31drm/amdgpu: fix error handling in amdgpu_cs_process_fence_depChristian König1-14/+12
We always need to drop the ctx reference and should check for errors first and then dereference the fence pointer. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-31drm/amd/powerplay: enable SW SMU reset functionalityEvan Quan1-7/+9
Move SMU irq handler register to sw_init as that's totally software related. Otherwise, it will prevent SMU reset working. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-31drm/amd/powerplay: fix null pointer dereference around dpm state relatesEvan Quan2-6/+15
DPM state relates are not supported on the new SW SMU ASICs. But still it's not OK to trigger null pointer dereference on accessing them. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-31drm/amdgpu/powerplay: use proper revision id for naviAlex Deucher1-1/+2
The PCI revision id determines the sku. Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-31drm/amd/powerplay: fix temperature granularity error in smu11Kevin Wang1-9/+9
in this patch, drm/amd/powerplay: add callback function of get_thermal_temperature_range the driver missed temperature granularity change on other temperature. Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-31drm/amd/powerplay: add callback function of get_thermal_temperature_rangeKevin Wang4-30/+40
1. the thermal temperature is asic related data, move the code logic to xxx_ppt.c. 2. replace data structure PP_TemperatureRange with smu_temperature_range. 3. change temperature uint from temp*1000 to temp (temperature uint). Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdkfd: Fix byte align on VegaMKent Russell1-1/+2
This was missed during the addition of VegaM support Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-27Merge tag 'Wimplicit-fallthrough-5.3-rc2' of ↵Linus Torvalds4-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull Wimplicit-fallthrough enablement from Gustavo A. R. Silva: "This marks switch cases where we are expecting to fall through, and globally enables the -Wimplicit-fallthrough option in the main Makefile. Finally, some missing-break fixes that have been tagged for -stable: - drm/amdkfd: Fix missing break in switch statement - drm/amdgpu/gfx10: Fix missing break in switch statement With these changes, we completely get rid of all the fall-through warnings in the kernel" * tag 'Wimplicit-fallthrough-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: Makefile: Globally enable fall-through warning drm/i915: Mark expected switch fall-throughs drm/amd/display: Mark expected switch fall-throughs drm/amdkfd/kfd_mqd_manager_v10: Avoid fall-through warning drm/amdgpu/gfx10: Fix missing break in switch statement drm/amdkfd: Fix missing break in switch statement perf/x86/intel: Mark expected switch fall-throughs mtd: onenand_base: Mark expected switch fall-through afs: fsclient: Mark expected switch fall-throughs afs: yfsclient: Mark expected switch fall-throughs can: mark expected switch fall-throughs firewire: mark expected switch fall-throughs
2019-07-26Merge tag 'drm-fixes-5.3-2019-07-24' of ↵Dave Airlie37-151/+432
git://people.freedesktop.org/~agd5f/linux into drm-fixes drm-fixes-5.3-2019-07-24: amdgpu: - RAS fixes for vega20 - Navi VCN fix - DC audio fixes - DC DSC fixes - DC dongle fixes - DC clk mgr fixes - Fix DDC lines on some RV2 boards - GDS fixes for compute - Navi SMU fixes ttm: - Use the same attributes when freeing d_page->vaddr Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190724210527.3415-1-alexander.deucher@amd.com
2019-07-25drm/amd/display: Mark expected switch fall-throughsGustavo A. R. Silva1-0/+5
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-07-25drm/amdkfd/kfd_mqd_manager_v10: Avoid fall-through warningGustavo A. R. Silva1-1/+0
In preparation to enabling -Wimplicit-fallthrough, this patch silences the following warning: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_mqd_manager_v10.c: In function ‘mqd_manager_init_v10’: ./include/linux/dynamic_debug.h:122:52: warning: this statement may fall through [-Wimplicit-fallthrough=] #define __dynamic_func_call(id, fmt, func, ...) do { \ ^ ./include/linux/dynamic_debug.h:143:2: note: in expansion of macro ‘__dynamic_func_call’ __dynamic_func_call(__UNIQUE_ID(ddebug), fmt, func, ##__VA_ARGS__) ^~~~~~~~~~~~~~~~~~~ ./include/linux/dynamic_debug.h:153:2: note: in expansion of macro ‘_dynamic_func_call’ _dynamic_func_call(fmt, __dynamic_pr_debug, \ ^~~~~~~~~~~~~~~~~~ ./include/linux/printk.h:336:2: note: in expansion of macro ‘dynamic_pr_debug’ dynamic_pr_debug(fmt, ##__VA_ARGS__) ^~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_mqd_manager_v10.c:432:3: note: in expansion of macro ‘pr_debug’ pr_debug("%s@%i\n", __func__, __LINE__); ^~~~~~~~ drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_mqd_manager_v10.c:433:2: note: here case KFD_MQD_TYPE_COMPUTE: ^~~~ by removing the call to pr_debug() in KFD_MQD_TYPE_CP: "The mqd init for CP and COMPUTE will have the same routine." [1] This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough. [1] https://lore.kernel.org/lkml/c735a1cc-a545-50fb-44e7-c0ad93ee8ee7@amd.com/ Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-07-25drm/amdgpu/gfx10: Fix missing break in switch statementGustavo A. R. Silva1-0/+1
Add missing break statement in order to prevent the code from falling through to case AMDGPU_IRQ_STATE_ENABLE. This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: a644d85a5cd4 ("drm/amdgpu: add gfx v10 implementation (v10)") Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-07-25drm/amdkfd: Fix missing break in switch statementGustavo A. R. Silva1-0/+1
Add missing break statement in order to prevent the code from falling through to case CHIP_NAVI10. This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: 14328aa58ce5 ("drm/amdkfd: Add navi10 support to amdkfd. (v3)") Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-07-23drm/amd/display: Set enabled to false at start of audio disableNicholas Kazlauskas1-2/+2
[Why] In an effort to stop redundant calls to dce110_disable_audio_stream the audio->enabled flag was added to the audio resource struct. While this state probably shouldn't have been tracked on the audio struct itself it still works fine for some sequences. However, it does not work for cases where we're freeing the audio resource (such as hotplugs) or when dynamic audio is enabled. In these cases the pipe_ctx->stream_res.audio = NULL before we can set audio->enabled = false. The next time we acquire the audio resource such as on hotplug the audio will not be enabled for the stream since DC thinks it's still enabled. Audio state tracking should cover this sequence. [How] Set audio->enabled = false at the start as long as we have pipe_ctx->stream_res.audio. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Zhan Liu <Zhan.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-22drm/amdgpu/smu: move fan rpm query into the asic specific codeAlex Deucher5-29/+31
On vega20, there is an SMU message to query it. On navi, it's fetched from the metrics table. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-22drm/amd/powerplay: custom peak clock freq for navi10Kevin Wang4-33/+103
v2: add function smu_default_set_performance_level as default dpm level handler. change function name smu_set_performance_level to smu_asic_set_performance_level v1: 1.NAVI10_PEAK_SCLK_XTX 1830 Mhz 2.NAVI10_PEAK_SCLK_XT 1755 Mhz 3.NAVI10_PEAK_SCLK_XL 1625 Mhz Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-19Merge tag 'drm-next-2019-07-19' of git://anongit.freedesktop.org/drm/drmLinus Torvalds53-255/+663
Pull drm fixes from Daniel Vetter: "Dave is back in shape, but now family got it so I'm doing the pull. Two things worthy of note: - nouveau feature pull was way too late, Dave&me decided to not take that, so Ben spun up a pull with just the fixes. - after some chatting with the arm display maintainers we decided to change a bit how that's maintained, for more oversight/review and cross vendor collab. More details below: nouveau: - bugfixes - TU116 enabling (minor iteration) :w amdgpu: - large pile of fixes for new hw support this release (navi, vega20) - audio hotplug fix - bunch of corner cases and small fixes all over for amdgpu/kfd komeda: - back out some new properties (from this merge window) that needs more pondering. bochs: - fb pitch setup core: - a new panel quirk - misc fixes" * tag 'drm-next-2019-07-19' of git://anongit.freedesktop.org/drm/drm: (73 commits) drm/nouveau/secboot/gp102-: remove WAR for SEC2 RTOS start bug drm/nouveau/flcn/gp102-: improve implementation of bind_context() on SEC2/GSP drm/nouveau: fix memory leak in nouveau_conn_reset() drm/nouveau/dmem: missing mutex_lock in error path drm/nouveau/hwmon: return EINVAL if the GPU is powered down for sensors reads drm/nouveau: fix bogus GPL-2 license header drm/nouveau: fix bogus GPL-2 license header drm/nouveau/i2c: Enable i2c pads & busses during preinit drm/nouveau/disp/tu102-: wire up scdc parameter setter drm/nouveau/core: recognise TU116 chipset drm/nouveau/kms: disallow dual-link harder if hdmi connection detected drm/nouveau/disp/nv50-: fix center/aspect-corrected scaling drm/nouveau/disp/nv50-: force scaler for any non-default LVDS/eDP modes drm/nouveau/mcp89/mmu: Use mcp77_mmu_new instead of g84_mmu_new on MCP89. drm/amd/display: init res_pool dccg_ref, dchub_ref with xtalin_freq drm/amdgpu/pm: remove check for pp funcs in freq sysfs handlers drm/amd/display: Force uclk to max for every state drm/amdkfd: Remove GWS from process during uninit drm/amd/amdgpu: Fix offset for vmid selection in debugfs interface drm/amd/powerplay: update vega20 driver if to fit latest SMU firmware ...
2019-07-18drm/amd/display: handle active dongle port type is DP++ or DP caseDale Zhao2-11/+21
[Why]: Some active dongles have DP++ port and DP port at the same time. Current code doesn't cover DP++ case and processes as default DVI case, in which audio is disabled. Because of dual mode, DP case is also treat as DVI case for the other port. [How]: According DP 1.4 spec, add DP++ procedure similar with HDMI case. Also add None dongle type for DP case. Signed-off-by: Dale Zhao <dale.zhao@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: do not read link setting if edp not connectedEric Yang1-7/+1
[Why] Previously assume eDP sink present if connector present. Do not need to enforce this restriction. Fix issue where driver attempt to read link setting even though no edp connected. {How] Only read link setting after reading connection status. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Increase size of audios arrayTai Man2-1/+2
[Why] The audios array defined in "struct resource_pool" is only 6 (MAX_PIPES) but the max number of audio devices (num_audio) is 7. In some projects, it will run out of audios array. [How] Incraese the audios array size to 7. Signed-off-by: Tai Man <taiman.wong@amd.com> Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: drop ASSERT() if eDP panel is not connectedZhan Liu1-2/+0
[Why] For boards that support eDP but do not have a physical eDP display connected an ASSERT will be thrown. This is not a critical failure and shouldn't be treated as such. [How] Drop the assertion. Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Only enable audio if speaker allocation existsAlvin Lee1-1/+1
[Why] In dm_helpers_parse_edid_caps, there is a corner case where no speakers can be allocated even though the audio mode count is greater than 0. Enabling audio when no speaker allocations exists can cause issues in the video stream. [How] Add a check to not enable audio unless one or more speaker allocations exist (since doing this can cause issues in the video stream). Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Fix dc_create failure handling and 666 color depthsJulian Parkin2-2/+5
[Why] It is possible (but very unlikely) that constructing dc fails before current_state is created. We support 666 color depth in some scenarios, but this isn't handled in get_norm_pix_clk. It uses exactly the same pixel clock as the 888 case. [How] Check for non null current_state before destructing. Add case for 666 color depth to get_norm_pix_clk to avoid assertion. Signed-off-by: Julian Parkin <julian.parkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: allocate 4 ddc engines for RV2Derek Lai1-1/+1
[Why] Driver will create 0, 1, and 2 ddc engines for RV2, but some platforms used 0, 1, and 3. [How] Still allocate 4 ddc engines for RV2. Signed-off-by: Derek Lai <Derek.Lai@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: put back front end initialization sequenceEric Yang1-14/+1
[Why] Seamless boot optimization removed proper front end power off sequence. In driver disable enable case, this causes driver to power gate hubp and dpp while there is still memory fetching going on, this can cause invalid memory requests to be generated which will hang data fabric. [How] Put back proper front end power off sequence Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Acked-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Wait for flip to completeAlvin Lee1-0/+11
[why] In pipe split issue occurs when we program immediate flip while vsync flip is pending [how] Don't program immediate flip until flip is no longer pending Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Jaehyun Chung <Jaehyun.Chung@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Change min_h_sync_width from 8 to 4Fatemeh Darbehani1-1/+1
[Why] Some display's hsync width is lower than the minimum dcn20 is set to support right now. This will cause optc1_validate_timing to fail which eventually will result in wrong set mode. This was set to 8 as per HW team's request for no valid reason. [How] Changing min_h_sync_width to 4 will let us validate timing for preffered mode and light up the headset. This change was made to Vega 10 before for a similar issue. Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com> Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com> Acked-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: use encoder's engine id to find matched free audio deviceTai Man1-1/+7
[Why] On some platforms, the encoder id 3 is not populated. So the encoders are not stored in right order as index (id: 0, 1, 2, 4, 5) at pool. This would cause encoders id 4 & id 5 to fail when finding corresponding audio device, defaulting to the first available audio device. As result, we cannot stream audio into two DP ports with encoders id 4 & id 5. [How] It need to create enough audio device objects (0 - 5) to perform matching. Then use encoder engine id to find matched audio device. Signed-off-by: Tai Man <taiman.wong@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: fix DMCU hang when going into Modern StandbyZi Yu Liao1-1/+8
[why] When the system is going into suspend, set_backlight gets called after the eDP got blanked. Since smooth brightness is enabled, the driver will make a call into the DMCU to ramp the brightness. The DMCU would try to enable ABM to do so. But since the display is blanked, this ends up causing ABM1_ACE_DBUF_REG_UPDATE_PENDING to get stuck at 1, which results in a dead lock in the DMCU firmware. [how] Disable brightness ramping when the eDP display is blanked. Signed-off-by: Zi Yu Liao <ziyu.liao@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Disable Audio on reinitialize hardwareAlvin Lee2-4/+17
[Why] When we recover from hang, we do not want to skip the audio enable call. [How] Disable audio in dc_reinitialize_hardware Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Read max down spreadDerek Lai1-0/+7
[Why] When launch D10.2, driver will write DPCD 0x107 with 0x00 [How] Read MAX_DOWNSPREAD (0x0003h) then keep in current link settings Signed-off-by: Derek Lai <Derek.Lai@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Check for valid stream_encodeIlya Bakoulin1-1/+2
Before accessing it's vtable, check that stream_encoder is non-null. Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Wait for backlight programming completion in set backlight ↵SivapiriyanKumarasamy1-0/+4
level [WHY] Currently we don't wait for blacklight programming completion in DMCU when setting backlight level. Some sequences such as PSR static screen event trigger reprogramming requires it to be complete. [How] Add generic wait for dmcu command completion in set backlight level. Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Poll for GPUVM context ready (v2)Julian Parkin1-0/+37
[Why] Hardware docs state that we must wait until the GPUVM context is ready after programming it. [How] Poll until the valid bit of PAGE_TABLE_BASE_ADDR_LO32 is set to 1 after programming it. v2: fix include for udelay (Alex) Signed-off-by: Julian Parkin <julian.parkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: wait for the whole frame after global unlockWenjing Liu1-0/+2
[why] The current code will not wait for the entire frame after global unlock. This causes dsc dynamic target bpp update corruption when there is a surface update immediately happens after this. [how] Wait for the entire whole frame after unlock before continuing the rest of stream and surface update. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-04 22:35:11 +0000