summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)AuthorFilesLines
2019-01-21drm/amd/powerplay: OD setting fix on Vega10Kenneth Feng1-1/+21
gfxclk for OD setting is limited to 1980M for non-acg ASICs of Vega10 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-17drm/amdgpu: Add APTX quirk for Lenovo laptopAlex Deucher1-0/+1
Needs ATPX rather than _PR3 for dGPU power control. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=202263 Reviewed-by: Jim Qu <Jim.Qu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-01-16drm/amd/display: Detach backlight from streamDavid Francis4-15/+3
[Why] Backlight is conceptually a property of links, not streams. All backlight programming is done on links, but there is a stream property bl_pwm_level that is used to restore backlight on dpms on and s3 resume. This is unnecessary, as backlight is already restored by hardware with no driver intervention. [How] Remove bl_pwm_level, and the stream argument to set_backlight Bug: https://bugs.freedesktop.org/show_bug.cgi?id=109375 Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 923fe4951282cbdfce05186c10380bbc45b5e03b)
2019-01-15Revert "drm/amdgpu: validate user pitch alignment"Michel Dänzer1-10/+0
The check turned out to be too strict in some cases. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-15Revert "drm/amdgpu: validate user GEM object size"Alex Deucher1-8/+0
It was at the same time too strict (for linear tiling modes, where no height alignment is required) and too lenient (for 2D tiling modes, where height may need to be aligned to values > 8). Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14drm/amd/display: Fix disabled cursor on top screen edgeNicholas Kazlauskas2-2/+2
[Why] The cursor vanishes when touching the top of edge of the screen for Raven on Linux. This occurs because the cursor height is not taken into account when deciding to disable the cursor. [How] Factor in the cursor height into the cursor calculations - and mimic the existing x position calculations. Fixes: 94a4ffd1d40b ("drm/amd/display: fix PIP bugs on Dal3") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14drm/amd/display: fix warning on raven hotplugRoman Li1-13/+6
[Why] Hotplug on raven results in REG_WAIT_TIMEOUT warning due to failing attempt to lock disabled otg for the hubp interdependent pipes programming. [How] Don't setup pipe interdependencies for disabled otg. Also removed the unnecessary duplicate logic checks. Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14drm/amd/display: fix PME notification not working in RV desktopCharlene Liu1-1/+6
[Why] PPLIB not receive the PME when unplug. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14drm/amd/display: Only get the connector state for VRR when toggledNicholas Kazlauskas1-1/+1
[Why] This fixes a stuttering issue that occurs when moving a hardware cursor when VRR is enabled. Previously when VRR is enabled atomic check will grab the connector state for every atomic update. This has to lock the connector in order to do so. The locking is bad enough by itself for performance, but it gets worse with what we do just below that - add all the planes for the CRTC to the commit. This prevents the cursor fast path from working - there's more than one plane now. With state->allow_modeset = true on top of this, it also adds and removes all the planes from the DC context triggering a full (very slow) update in DC. [How] We need the connector state to get the VRR min/max capbilities, but we only need them when there's a CRTC mode change or when VRR is toggled. The condition has been updated accordingly. Fixes: 3cc22f281318 ("drm/amdgpu: Set FreeSync state using drm VRR properties") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14drm/amd/display: Pack DMCU iRAM alignmentJosip Pavic1-0/+2
[Why] When the DMCU's iRAM definition was moved to the newly created power_helpers, a #pragma pack was lost, causing the iRAM to be misaligned [How] Restore the #pragma pack Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14drm/amd/powerplay: run acg btc for Vega12Kenneth Feng1-0/+21
acg btc was added to Vega12 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14drm/amdkfd: Don't assign dGPUs to APU topology devicesFelix Kuehling1-3/+9
dGPUs need their own topology devices. Don't assign them to APU topology devices with CPU cores. Bug: https://github.com/RadeonOpenCompute/ROCK-Kernel-Driver/issues/66 Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Tested-by: Elias Konstantinidis <ekondis@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14drm/amdkfd: Allow building KFD on ARM64 (v2)Felix Kuehling3-6/+15
ifdef x86_64 specific code. Allow enabling CONFIG_HSA_AMD on ARM64. v2: Fixed a compiler warning due to an unused variable CC: Mark Nutter <Mark.Nutter@arm.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Tested-by: Mark Nutter <Mark.Nutter@arm.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-11Merge branch 'drm-fixes-5.0' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie15-96/+156
into drm-fixes - Powerplay fixes - Virtual display pinning fixes - Golden register updates for vega - Pitch and gem size validation fixes - Fix for error case in sr-iov init - Disable page tables in system memory on RV due to issues with IOMMU reported on some platforms Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190109204336.3315-1-alexander.deucher@amd.com
2019-01-09drm/amdgpu: disable system memory page tables for nowChristian König1-3/+0
We hit a problem with IOMMU with that. Disable until we have time to debug further. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-09drm/amdgpu: set WRITE_BURST_LENGTH to 64B to workaround SDMA1 hangJim Qu1-1/+2
effect asics: VEGA10 and VEGA12 Signed-off-by: Jim Qu <Jim.Qu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-09drm/amdgpu: fix CPDMA hang in PRT mode for VEGA20Tao Zhou1-5/+5
Fix CPDMA hang in PRT mode for both VEGA10 and VEGA20 Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Tested-by: Yukun.Li <yukun1.li@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-08drm/amdgpu: Don't fail resume process if resuming atomic state failsLyude Paul1-3/+2
This is an ugly one unfortunately. Currently, all DRM drivers supporting atomic modesetting will save the state that userspace had set before suspending, then attempt to restore that state on resume. This probably worked very well at one point, like many other things, until DP MST came into the picture. While it's easy to restore state on normal display connectors that were disconnected during suspend regardless of their state post-resume, this can't really be done with MST because of the fact that setting up a downstream sink requires performing sideband transactions between the source and the MST hub, sending out the ACT packets, etc. Because of this, there isn't really a guarantee that we can restore the atomic state we had before suspend once we've resumed. This sucks pretty bad, but so far I haven't run into any compositors that this actually causes serious issues with. Most compositors will notice the hotplug we send afterwards, and then reprobe state. Since nouveau and i915 also don't fail the suspend/resume process due to failing to restore the atomic state, let's make amdgpu match this behavior. Better to resume the GPU properly, then to stop the process half way because of a potentially unavoidable atomic commit failure. Eventually, we'll have a real fix for this problem on the DRM level. But we've got some more important low-hanging fruit to deal with first. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Cc: Jerry Zuo <Jerry.Zuo@amd.com> Cc: <stable@vger.kernel.org> # v4.15+ Link: https://patchwork.freedesktop.org/patch/msgid/20190108211133.32564-3-lyude@redhat.com
2019-01-08drm/amdgpu: Don't ignore rc from drm_dp_mst_topology_mgr_resume()Lyude Paul1-9/+23
drm_dp_mst_topology_mgr_resume() returns whether or not it managed to find the topology in question after a suspend resume cycle, and the driver is supposed to check this value and disable MST accordingly if it's gone-in addition to sending a hotplug in order to notify userspace that something changed during suspend. Currently, amdgpu just makes the mistake of ignoring the return code from drm_dp_mst_topology_mgr_resume() which means that if a topology was removed in suspend, amdgpu never notices and assumes it's still connected which leads to all sorts of problems. So, fix this by actually checking the rc from drm_dp_mst_topology_mgr_resume(). Also, reformat the rest of the function while we're at it to fix the over-indenting. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Cc: Jerry Zuo <Jerry.Zuo@amd.com> Cc: <stable@vger.kernel.org> # v4.15+ Link: https://patchwork.freedesktop.org/patch/msgid/20190108211133.32564-2-lyude@redhat.com
2019-01-08drm/amdgpu: validate user GEM object sizeYu Zhao1-0/+8
When creating frame buffer, userspace may request to attach to a previously allocated GEM object that is smaller than what GPU requires. Validation must be done to prevent out-of-bound DMA, otherwise it could be exploited to reveal sensitive data. This fix is not done in a common code path because individual driver might have different requirement. Cc: stable@vger.kernel.org # v4.2+ Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-08drm/amdgpu: validate user pitch alignmentYu Zhao1-0/+10
Userspace may request pitch alignment that is not supported by GPU. Some requests 32, but GPU ignores it and uses default 64 when cpp is 4. If GEM object is allocated based on the smaller alignment, GPU DMA will go out of bound. Cc: stable@vger.kernel.org # v4.2+ Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-08drm/amd/powerplay: drop the unnecessary uclk hard min settingEvan Quan1-7/+0
Since soft min setting is enough. Hard min setting is redundant. Reported-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-08drm/amd/powerplay: avoid possible buffer overflowEvan Quan1-0/+14
Make sure the clock level enforced is within the allowed ranges. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-08drm/amd/powerplay: create pp_od_clk_voltage device file under OD supportEvan Quan1-8/+14
Since pp_od_clk_voltage device file is for OD related sysfs operations. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-08drm/amd/powerplay: update OD support flag for SKU with no OD capabilitiesEvan Quan1-0/+3
For those ASICs with no overdrive capabilities, the OD support flag will be reset. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-05Merge tag 'drm-next-2019-01-05' of git://anongit.freedesktop.org/drm/drmLinus Torvalds42-268/+563
Pull drm fixes from Dave Airlie: "Happy New Year, just decloaking from leave to get some stuff from the last week in before rc1: core: - two regression fixes for damage blob and atomic i915 gvt: - Some missed GVT fixes from the original pull amdgpu: - new PCI IDs - SR-IOV fixes - DC fixes - Vega20 fixes" * tag 'drm-next-2019-01-05' of git://anongit.freedesktop.org/drm/drm: (53 commits) drm: Put damage blob when destroy plane state drm: fix null pointer dereference on null state pointer drm/amdgpu: Add new VegaM pci id drm/ttm: Use drm_debug_printer for all ttm_bo_mem_space_debug output drm/amdgpu: add Vega20 PSP ASD firmware loading drm/amd/display: Fix MST dp_blank REG_WAIT timeout drm/amd/display: validate extended dongle caps drm/amd/display: Use div_u64 for flip timestamp ns to ms drm/amdgpu/uvd:Change uvd ring name convention drm/amd/powerplay: add Vega20 LCLK DPM level setting support drm/amdgpu: print process info when job timeout drm/amdgpu/nbio7.4: add hw bug workaround for vega20 drm/amdgpu/nbio6.1: add hw bug workaround for vega10/12 drm/amd/display: Optimize passive update planes. drm/amd/display: verify lane status before exiting verify link cap drm/amd/display: Fix bug with not updating VSP infoframe drm/amd/display: Add retry to read ddc_clock pin drm/amd/display: Don't skip link training for empty dongle drm/amd/display: Wait edp HPD to high in detect_sink drm/amd/display: fix surface update sequence ...
2019-01-03Remove 'type' argument from access_ok() functionLinus Torvalds1-12/+6
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03drm/amdgpu: make gfx9 enter into rlc safe mode when set MGCGLikun Gao1-0/+4
MGCG should RLC enter into safe mode first. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-03drm/amdgpu: Cleanup 2 compiler warningsKent Russell1-2/+0
These 2 variables are unused now, so remove their references. Fixes: e4ae0fc drm/amdgpu: implement gfx8 post_soft_reset Fixes: 5e01c09 drm/amdgpu/gfx_v8_0: Reorder the gfx, kiq and kcq rings test sequence Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-02drm/amdgpu/gfx_v8_0: Reorder the gfx, kiq and kcq rings test sequenceTiecheng Zhou1-13/+35
The kiq ring and the very first compute ring may fail occasionally if they are tested directly following kiq_kcq_enable. Insert the gfx ring test before kiq ring test to delay the kiq and kcq ring tests will fix the issue. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-02drm/amdgpu/sriov:Correct pfvf exchange logicEmily Deng2-5/+5
The pfvf exchange need be in exclusive mode. And add pfvf exchange in gpu reset. Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-By: Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-02drm/amd/powerplay: support BOOTUP_DEFAULT power profile modeEvan Quan6-29/+40
This can avoid unexpected profile mode change after running compute workload. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-02drm/amdgpu/virtual_dce: No need to pin the cursor boEmily Deng1-2/+2
For virtual display feature, no need to pin cursor bo. Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-02drm/amdgpu/virtual_dce: No need to pin the fb's boEmily Deng2-22/+15
For virtual display, no need to pin the fb's bo. Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-28mm/mmu_notifier: use structure for invalidate_range_start/end callbackJérôme Glisse1-27/+20
Patch series "mmu notifier contextual informations", v2. This patchset adds contextual information, why an invalidation is happening, to mmu notifier callback. This is necessary for user of mmu notifier that wish to maintains their own data structure without having to add new fields to struct vm_area_struct (vma). For instance device can have they own page table that mirror the process address space. When a vma is unmap (munmap() syscall) the device driver can free the device page table for the range. Today we do not have any information on why a mmu notifier call back is happening and thus device driver have to assume that it is always an munmap(). This is inefficient at it means that it needs to re-allocate device page table on next page fault and rebuild the whole device driver data structure for the range. Other use case beside munmap() also exist, for instance it is pointless for device driver to invalidate the device page table when the invalidation is for the soft dirtyness tracking. Or device driver can optimize away mprotect() that change the page table permission access for the range. This patchset enables all this optimizations for device drivers. I do not include any of those in this series but another patchset I am posting will leverage this. The patchset is pretty simple from a code point of view. The first two patches consolidate all mmu notifier arguments into a struct so that it is easier to add/change arguments. The last patch adds the contextual information (munmap, protection, soft dirty, clear, ...). This patch (of 3): To avoid having to change many callback definition everytime we want to add a parameter use a structure to group all parameters for the mmu_notifier invalidate_range_start/end callback. No functional changes with this patch. [akpm@linux-foundation.org: fix drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c kerneldoc] Link: http://lkml.kernel.org/r/20181205053628.3210-2-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Jason Gunthorpe <jgg@mellanox.com> [infiniband] Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Felix Kuehling <felix.kuehling@amd.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28mm: convert zone->managed_pages to atomic variableArun KS1-1/+1
totalram_pages, zone->managed_pages and totalhigh_pages updates are protected by managed_page_count_lock, but readers never care about it. Convert these variables to atomic to avoid readers potentially seeing a store tear. This patch converts zone->managed_pages. Subsequent patches will convert totalram_panges, totalhigh_pages and eventually managed_page_count_lock will be removed. Main motivation was that managed_page_count_lock handling was complicating things. It was discussed in length here, https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes better to remove the lock and convert variables to atomic, with preventing poteintial store-to-read tearing as a bonus. Link: http://lkml.kernel.org/r/1542090790-21750-3-git-send-email-arunks@codeaurora.org Signed-off-by: Arun KS <arunks@codeaurora.org> Suggested-by: Michal Hocko <mhocko@suse.com> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-25Merge tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drmLinus Torvalds236-6590/+9562
Pull drm updates from Dave Airlie: "Core: - shared fencing staging removal - drop transactional atomic helpers and move helpers to new location - DP/MST atomic cleanup - Leasing cleanups and drop EXPORT_SYMBOL - Convert drivers to atomic helpers and generic fbdev. - removed deprecated obj_ref/unref in favour of get/put - Improve dumb callback documentation - MODESET_LOCK_BEGIN/END helpers panels: - CDTech panels, Banana Pi Panel, DLC1010GIG, - Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA, - Himax HX8357D, simulated RTSM AEMv8. - GPD Win2 panel - AUO G101EVN010 vgem: - render node support ttm: - move global init out of drivers - fix LRU handling for ghost objects - Support for simultaneous submissions to multiple engines scheduler: - timeout/fault handling changes to help GPU recovery - helpers for hw with preemption support i915: - Scaler/Watermark fixes - DP MST + powerwell fixes - PSR fixes - Break long get/put shmemfs pages - Icelake fixes - Icelake DSI video mode enablement - Engine workaround improvements amdgpu: - freesync support - GPU reset enabled on CI, VI, SOC15 dGPUs - ABM support in DC - KFD support for vega12/polaris12 - SDMA paging queue on vega - More amdkfd code sharing - DCC scanout on GFX9 - DC kerneldoc - Updated SMU firmware for GFX8 chips - XGMI PSP + hive reset support - GPU reset - DC trace support - Powerplay updates for newer Polaris - Cursor plane update fast path - kfd dma-buf support virtio-gpu: - add EDID support vmwgfx: - pageflip with damage support nouveau: - Initial Turing TU104/TU106 modesetting support msm: - a2xx gpu support for apq8060 and imx5 - a2xx gpummu support - mdp4 display support for apq8060 - DPU fixes and cleanups - enhanced profiling support - debug object naming interface - get_iova/page pinning decoupling tegra: - Tegra194 host1x, VIC and display support enabled - Audio over HDMI for Tegra186 and Tegra194 exynos: - DMA/IOMMU refactoring - plane alpha + blend mode support - Color format fixes for mixer driver rcar-du: - R8A7744 and R8A77470 support - R8A77965 LVDS support imx: - fbdev emulation fix - multi-tiled scalling fixes - SPDX identifiers rockchip - dw_hdmi support - dw-mipi-dsi + dual dsi support - mailbox read size fix qxl: - fix cursor pinning vc4: - YUV support (scaling + cursor) v3d: - enable TFU (Texture Formatting Unit) mali-dp: - add support for linear tiled formats sun4i: - Display Engine 3 support - H6 DE3 mixer 0 support - H6 display engine support - dw-hdmi support - H6 HDMI phy support - implicit fence waiting - BGRX8888 support meson: - Overlay plane support - implicit fence waiting - HDMI 1.4 4k modes bridge: - i2c fixes for sii902x" * tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drm: (1403 commits) drm/amd/display: Add fast path for cursor plane updates drm/amdgpu: Enable GPU recovery by default for CI drm/amd/display: Fix duplicating scaling/underscan connector state drm/amd/display: Fix unintialized max_bpc state values Revert "drm/amd/display: Set RMX_ASPECT as default" drm/amdgpu: Fix stub function name drm/msm/dpu: Fix clock issue after bind failure drm/msm/dpu: Clean up dpu_media_info.h static inline functions drm/msm/dpu: Further cleanups for static inline functions drm/msm/dpu: Cleanup the debugfs functions drm/msm/dpu: Remove dpu_irq and unused functions drm/msm: Make irq_postinstall optional drm/msm/dpu: Cleanup callers of dpu_hw_blk_init drm/msm/dpu: Remove unused functions drm/msm/dpu: Remove dpu_crtc_is_enabled() drm/msm/dpu: Remove dpu_crtc_get_mixer_height drm/msm/dpu: Remove dpu_dbg drm/msm: dpu: Remove crtc_lock drm/msm: dpu: Remove vblank_requested flag from dpu_crtc drm/msm: dpu: Separate crtc assignment from vblank enable ...
2018-12-21drm/amdgpu: Add new VegaM pci idAlex Deucher1-0/+1
Add a new pci id. Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-12-21drm/amdgpu: add Vega20 PSP ASD firmware loadingEvan Quan1-9/+31
Add PSP ASD firmware loading on Vega20. Not sure why this was missing before. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-12-20drm/amd/display: Fix MST dp_blank REG_WAIT timeoutJerry (Fangzhi) Zuo1-2/+2
Need to blank stream before deallocate MST payload. [drm:generic_reg_wait [amdgpu]] *ERROR* REG_WAIT timeout 10us * 3000 tries - dce110_stream_encoder_dp_blank line:944 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2201 at /var/lib/dkms/amdgpu/18.50-690240/build/amd/amdgpu/../display/dc/dc_helper.c:249 generic_reg_wait+0xe7/0x160 [amdgpu] Call Trace: dce110_stream_encoder_dp_blank+0x11c/0x180 [amdgpu] core_link_disable_stream+0x40/0x230 [amdgpu] ? generic_reg_update_ex+0xdb/0x130 [amdgpu] dce110_reset_hw_ctx_wrap+0xb7/0x1f0 [amdgpu] dce110_apply_ctx_to_hw+0x30/0x430 [amdgpu] ? dce110_apply_ctx_for_surface+0x206/0x260 [amdgpu] dc_commit_state+0x2ba/0x4d0 [amdgpu] amdgpu_dm_atomic_commit_tail+0x297/0xd70 [amdgpu] ? amdgpu_bo_pin_restricted+0x58/0x260 [amdgpu] ? wait_for_completion_timeout+0x1f/0x120 ? wait_for_completion_interruptible+0x1c/0x160 commit_tail+0x3d/0x60 [drm_kms_helper] drm_atomic_helper_commit+0xf6/0x100 [drm_kms_helper] drm_atomic_connector_commit_dpms+0xe5/0xf0 [drm] drm_mode_obj_set_property_ioctl+0x14f/0x250 [drm] drm_mode_connector_property_set_ioctl+0x2e/0x40 [drm] drm_ioctl+0x1e0/0x430 [drm] ? drm_mode_connector_set_obj_prop+0x70/0x70 [drm] ? ep_read_events_proc+0xb0/0xb0 ? ep_scan_ready_list.constprop.18+0x1e6/0x1f0 ? timerqueue_add+0x52/0x80 amdgpu_drm_ioctl+0x49/0x80 [amdgpu] do_vfs_ioctl+0x90/0x5f0 SyS_ioctl+0x74/0x80 do_syscall_64+0x74/0x140 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 ---[ end trace 3ed7b77a97d60f72 ]--- Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-12-20drm/amd/display: validate extended dongle capsWenjing Liu1-1/+2
[why] Some dongle doesn't have a valid extended dongle caps, but we still set the extended dongle caps to be valid. This causes validation fails for all timing. [how] If no dp_hdmi_max_pixel_clk is provided, don't use extended dongle caps. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Abdoulaye Berthe <Abdoulaye.Berthe@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-20drm/amd/display: Use div_u64 for flip timestamp ns to msNicholas Kazlauskas1-1/+4
Resolves __udivdi3 missing errors when building for i386. Fixes: 6378ef012ddc ("drm/amd/display: Add below the range support for FreeSync") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-20drm/amdgpu/uvd:Change uvd ring name conventionJames Zhu1-2/+2
Since umr tool can't handle bracket, change uvd ring name convention. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-20drm/amd/powerplay: add Vega20 LCLK DPM level setting supportEvan Quan1-0/+43
Support manual LCLK DPM level switch on Vega20. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-20drm/amdgpu: print process info when job timeoutTrigger Huang1-0/+6
When a job is timeout, try to print the related process information for debugging Signed-off-by: Trigger Huang <Trigger.Huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-20drm/amdgpu/nbio7.4: add hw bug workaround for vega20Alex Deucher1-0/+7
Configure PCIE_CI_CNTL to work around a hw bug that affects some multi-GPU compute workloads. Acked-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-20drm/amdgpu/nbio6.1: add hw bug workaround for vega10/12Alex Deucher1-0/+7
Configure PCIE_CI_CNTL to work around a hw bug that affects some multi-GPU compute workloads. Acked-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-18drm/amd/display: Optimize passive update planes.Yongqiang Sun1-3/+0
[Why] passive update planes still spends a litte more time on some cases. [How] Remove unnecessary trace which involving in some register read. Disable debug output for release build. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-18drm/amd/display: verify lane status before exiting verify link capWenjing Liu2-119/+127
[why] DP LL CTS1.4 4.3.2.1 test failure. [how] The failure is caused by not handling DP link loss hpd short pusle during set mode. The change is to read link status before set mode link training. If link is lost, re-verify link caps. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-18drm/amd/display: Fix bug with not updating VSP infoframeSivapiriyanKumarasamy1-1/+2
[WHY] Currently, when the VSP infopacket is rebuilt in DM, it is not updated when being programmed in encoder. [HOW] Add new VSP case for update_info_frame Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-04 12:04:41 +0000