summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)AuthorFilesLines
2022-11-15drm/amd/display: don't enable DRM CRTC degamma property for DCEMelissa Wen1-2/+8
DM maps DRM CRTC degamma to DPP (pre-blending) degamma block, but DCE doesn't support programmable degamma curve anywhere. Currently, a custom degamma is accepted by DM but just ignored by DCE driver and degamma correction isn't actually applied. There is no way to map custom degamma in DCE, therefore, DRM CRTC degamma property shouldn't be enabled for DCE drivers. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: 3.2.212Aric Cyr1-1/+1
DC version 3.2.212 brings along the following fixes: - Fix DPIA AUX timeout issue - Add HUBP surface flip interrupt handler - Fix dpms_off issue when disabling bios mode - Update SubVP Visual Confirm - Program pipes for ODM when removing planes - Use min transition for all SubVP plane add/remove - Support parsing VRAM info v3.0 from VBIOS - Enable dchub request limit for NV32 - Workaround to increase phantom pipe vactive in pipesplit - Fix dcn3.1x mode validation on high bandwidth config - Check context constructed for pipe split flags after pipesplit - Align phantom pipe dst/src scaling with main for subvp - Fix calculation for cursor CAB allocation - Fix unbounded requesting for high pixel rate modes on dcn315 - Revert Disable DRR actions during state commit - Fix array index out of bound error in bios parser - Fix optc2_configure warning on dcn314 - Fix Subvp phantom pipe transition - Fix prefetch calculations for dcn32 - Use uclk pstate latency for fw assisted mclk validation dcn32 - Set max for prefetch lines on dcn32 - Rework macros for DWB register access - Adjust DP 8b10b LT exit behavior Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Aric Cyr <Aric.Cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: [FW Promotion] Release 0.0.143.0Anthony Koo1-1/+2
- New boot options to enable USB4 DP BW Allocation mode in DPIA Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Adjust DP 8b10b LT exit behaviorIlya Bakoulin1-9/+11
[Why] Polling SINK_STATUS DPCD can cause some non-DP2.0 LTTPR hubs to hang and no longer respond to AUX. [How] As a workaround for the problem hubs, and also to more closely match DP spec 8b10b behavior, don't poll for intra-hop AUX reply indication on 8b10b-encoded links. Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: rework macros for DWB register accessAurabindo Pillai17-250/+207
[Why] A hack was used to access DWB register due to difference in the register naming convention which was not compatible with existing SR/SRI* macros. The additional macro needed were added to dwb ip specific header file (dcnxx_dwb.h) instead of soc resource file (dcnxx_resource.c). Due to this pattern, BASE macro had to be redefined in dcnxx_dwb.h, which in turn needed us to undefine them in the resource file. [How] Add a separate macro for DWB access to the resource files that need it instead of defining them in DWB ip header file. This will enable us to reuse the BASE macro defined in the resource file. Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Set max for prefetch lines on dcn32Dillon Varone2-4/+5
[WHY?] Max number of lines that can be used for prefetch due to type constraints is 63.75. [HOW?] Enforce maximum prefetch lines as 63.75. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: use uclk pstate latency for fw assisted mclk validation dcn32Dillon Varone1-1/+15
[WHY?] DCN32 uses fclk pstate watermarks for dummy pstate, and must always be supported. [HOW?] Validation needs to be run with fclk pstate latency set as the dummy pstate latency to get correct prefetch and bandwidth outputs. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Fix prefetch calculations for dcn32Dillon Varone1-0/+2
[Description] Prefetch calculation loop was not exiting until utilizing all of vstartup if it failed once. Locals need to be reset on each iteration of the loop. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Fix Subvp phantom pipe transitionAlvin Lee6-36/+87
[Description] - When transitioning a pipe in use (non-phantom) to become a phantom pipe, we must fully disable the pipe first before doing any phantom pipe programming - Move phantom OTG enablement to after "regular" front-end programming sequence (including wait for vupdate) - If a pipe is being transitioned into a phantom pipe, fully disable it first Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Fix optc2_configure warning on dcn314Roman Li1-1/+1
[Why] dcn314 uses optc2_configure_crc() that wraps optc1_configure_crc() + set additional registers not applicable to dcn314. It's not critical but when used leads to warning like: WARNING: drivers/gpu/drm/amd/amdgpu/../display/dc/dc_helper.c Call Trace: <TASK> generic_reg_set_ex+0x6d/0xe0 [amdgpu] optc2_configure_crc+0x60/0x80 [amdgpu] dc_stream_configure_crc+0x129/0x150 [amdgpu] amdgpu_dm_crtc_configure_crc_source+0x5d/0xe0 [amdgpu] [How] Use optc1_configure_crc() directly Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: fix array index out of bound error in bios parserAurabindo Pillai1-9/+7
[Why&How] Firmware headers dictate that gpio_pin array only has a size of 8. The count returned from vbios however is greater than 8. Fix this by not using array indexing but incrementing the pointer since gpio_pin definition in atomfirmware.h is hardcoded to size 8 Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: revert Disable DRR actions during state commitMartin Leung1-0/+3
why and how: causes unstable on certain surface format/mpo transitions This reverts commit de020e5fa9ebc6fc32e82ae6ccb0282451ed937c Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Don't check output BPP for phantomAlvin Lee1-1/+1
[Description] - If we're enabling phantom pipe for a high link rate display we could fail DML on the phantom pipe since it's set to virtual signal - Therefore don't consider Output BPP for phantom pipe Reviewed-by: Dillon Varone <Dillon.Varone@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: fix unbounded requesting for high pixel rate modes on dcn315Dmytro Laktyushkin3-1/+9
Unbounded requesting is getting configured for odm mode calculations which is incorrect. This change checks whether mode requires odm ahead of time. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Fix calculation for cursor CAB allocationGeorge Shen1-9/+5
[Why] The cursor size (in memory) is currently incorrectly calculated, resulting not enough CAB being allocated for static screen cursor in MALL refresh. This results in cursor image corruption. [How] Use cursor pitch instead of cursor width when calculating cursor size. Update num cache lines calculation to use the result of the cursor size calculation instead of manually recalculating again. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Align phantom pipe dst/src scaling with main for subvpDillon Varone2-2/+8
[WHY?] Subvp src/dst stream rectangles are not being created with the same scaling factors as the main stream. [HOW?] Make sure subvp stream src rectangle scales its height to have the same src/dst ratio as the main stream. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Check context constructed for pipe split flags is still validDillon Varone1-0/+19
[WHY?] After applying pipesplit flags, DML can select a different configuration upon revalidation, despite the desired one still being valid. [HOW?] Check the configuration is still has mode support, and apply it. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: fix dcn3.1x mode validation on high bandwidth configCharlene Liu9-19/+90
[why] 1. correct dram_channel_width (was hard coded to 4 for 32bit) 2. use dm's is_hvm_enable status flag for hostvm_en input for dml. 3. add a function to override to all dcn3.1x. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Workaround to increase phantom pipe vactive in pipesplitGeorge Shen1-0/+7
[Why] Certain high resolution displays exhibit DCC line corruption with SubVP enabled. This is likely due to insufficient DCC meta data buffered immediately after the mclk switch. [How] Add workaround to increase phantom pipe vactive height by meta_row_height number of lines, thus increasing the amount of meta data buffered immediately after mclk switch finishes. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: enable dchub request limit for DCN 3.2.xJun Lei8-4/+37
[why] HW recommend we enable this for better DF QoS for DCN 3.2.x [how] Add interfaces to hubbub to program register Add initialization as part of init_hw Add default settings for DCN 3.2.x Add registry override for debug/tuning Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Jun Lei <jun.lei@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: don't enable DRM CRTC degamma property for DCEMelissa Wen1-2/+8
DM maps DRM CRTC degamma to DPP (pre-blending) degamma block, but DCE doesn't support programmable degamma curve anywhere. Currently, a custom degamma is accepted by DM but just ignored by DCE driver and degamma correction isn't actually applied. There is no way to map custom degamma in DCE, therefore, DRM CRTC degamma property shouldn't be enabled for DCE drivers. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-11-15drm/amd/display: Set max for prefetch lines on dcn32Dillon Varone2-4/+5
[WHY?] Max number of lines that can be used for prefetch due to type constraints is 63.75. [HOW?] Enforce maximum prefetch lines as 63.75. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: use uclk pstate latency for fw assisted mclk validation dcn32Dillon Varone1-1/+15
[WHY?] DCN32 uses fclk pstate watermarks for dummy pstate, and must always be supported. [HOW?] Validation needs to be run with fclk pstate latency set as the dummy pstate latency to get correct prefetch and bandwidth outputs. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Fix prefetch calculations for dcn32Dillon Varone1-0/+2
[Description] Prefetch calculation loop was not exiting until utilizing all of vstartup if it failed once. Locals need to be reset on each iteration of the loop. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-15drm/amd/display: Fix optc2_configure warning on dcn314Roman Li1-1/+1
[Why] dcn314 uses optc2_configure_crc() that wraps optc1_configure_crc() + set additional registers not applicable to dcn314. It's not critical but when used leads to warning like: WARNING: drivers/gpu/drm/amd/amdgpu/../display/dc/dc_helper.c Call Trace: <TASK> generic_reg_set_ex+0x6d/0xe0 [amdgpu] optc2_configure_crc+0x60/0x80 [amdgpu] dc_stream_configure_crc+0x129/0x150 [amdgpu] amdgpu_dm_crtc_configure_crc_source+0x5d/0xe0 [amdgpu] [How] Use optc1_configure_crc() directly Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-15drm/amd/display: Fix calculation for cursor CAB allocationGeorge Shen1-9/+5
[Why] The cursor size (in memory) is currently incorrectly calculated, resulting not enough CAB being allocated for static screen cursor in MALL refresh. This results in cursor image corruption. [How] Use cursor pitch instead of cursor width when calculating cursor size. Update num cache lines calculation to use the result of the cursor size calculation instead of manually recalculating again. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-15drm/amd/display: Support parsing VRAM info v3.0 from VBIOSGeorge Shen1-0/+30
[Why] For DCN3.2 and DCN3.21, VBIOS has switch to using v3.0 of the VRAM info struct. We should read and override the VRAM info in driver with values provided by VBIOS to support memory downbin cases. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-15drm/amd/display: Fix invalid DPIA AUX reply causing system hangStylon Wang2-6/+20
[Why] Some DPIA AUX replies have incorrect data length from original request. This could lead to overwriting of destination buffer if reply length is larger, which could cause invalid access to stack since many destination buffers are declared as local variables. [How] Check for invalid length from DPIA AUX replies and trigger a retry if reply length is not the same as original request. A DRM_WARN() dmesg log is also produced. Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-15drm/amd/display: Add HUBP surface flip interrupt handlerRodrigo Siqueira1-0/+1
On IGT, there is a test named amd_hotplug, and when the subtest basic is executed on DCN31, we get the following error: [drm] *ERROR* [CRTC:71:crtc-0] flip_done timed out [drm] *ERROR* flip_done timed out [drm] *ERROR* [CRTC:71:crtc-0] commit wait timed out [drm] *ERROR* flip_done timed out [drm] *ERROR* [CONNECTOR:88:DP-1] commit wait timed out [drm] *ERROR* flip_done timed out [drm] *ERROR* [PLANE:59:plane-3] commit wait timed out After enable the page flip log with the below command: echo -n 'format "[PFLIP]" +p' > /sys/kernel/debug/dynamic_debug/control It is possible to see that the flip was submitted, but DC never replied back, which generates time-out issues. This is an indication that the HUBP surface flip is missing. This commit fixes this issue by adding hubp1_set_flip_int to DCN31. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-11-15drm/amd/display: Fix access timeout to DPIA AUX at boot timeStylon Wang1-6/+6
[Why] Since introduction of patch "Query DPIA HPD status.", link detection at boot could be accessing DPIA AUX, which will not succeed until DMUB outbox messaging is enabled and results in below dmesg logs: [ 160.840227] [drm:amdgpu_dm_process_dmub_aux_transfer_sync [amdgpu]] *ERROR* wait_for_completion_timeout timeout! [How] Enable DMUB outbox messaging before link detection at boot time. Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-15drm/amd/display: Support parsing VRAM info v3.0 from VBIOSGeorge Shen1-0/+30
[Why] For DCN3.2 and DCN3.21, VBIOS has switch to using v3.0 of the VRAM info struct. We should read and override the VRAM info in driver with values provided by VBIOS to support memory downbin cases. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: use low clocks for no plane configsDmytro Laktyushkin2-5/+27
Stream only configurations do not require DCFCLK, SOCCLK, DPPCLK or FCLK. They also always allow pstate change. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Use min transition for all SubVP plane add/removeAlvin Lee1-9/+22
[Description] - Whenever disabling a phantom pipe, we must run through the minimal transition sequence - In the case where SetVisibility = false for the main pipe, we also need to run through the min transtion when disabling the phantom pipes Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Program pipes for ODM when removing planesDillon Varone2-1/+14
[WHY?] Software state expects pipes to be configured for ODM, but due to the transition occurring on a plane disable, the ODM enablement code is not run. [HOW?] Update ODM when removing a plane, and dynamic ODM is active. Also acquire pipe lock when removing a plane. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: clean up some irq service code for dcn201Liu Xi2-8/+11
[Why and how] Clean up some irq service code for dcn201. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Liu Xi <xi.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Update SubVP Visual ConfirmDavid Galiffi1-1/+18
[Why] The visual confirm bar is displayed on all displays, but is only updated on a flip. If an update causes SubVP to be disabled on all displays, but there are no updates on the other displays, it will lead to stale information displayed on the non-active displays. An example of this is playing a fullscreen video on a rotated display. [How] Add a procedure to update visual confirm color for all pipes when committing a plane. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: David Galiffi <David.Galiffi@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: fix dpms_off issue when disabling bios modeZhongwei Zhang1-1/+1
[Why] disable_vbios_mode_if_required() will set dpms_off to false during boot when pixel clk dismatches with driver requires. This will cause extra backlight on and off if OS call 2 times setmode. [How] Set dpms_off to true to keep power_off and let OS control BL by display's powerState. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Fix invalid DPIA AUX reply causing system hangStylon Wang2-6/+20
[Why] Some DPIA AUX replies have incorrect data length from original request. This could lead to overwriting of destination buffer if reply length is larger, which could cause invalid access to stack since many destination buffers are declared as local variables. [How] Check for invalid length from DPIA AUX replies and trigger a retry if reply length is not the same as original request. A DRM_WARN() dmesg log is also produced. Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-15drm/amd/display: Add HUBP surface flip interrupt handlerRodrigo Siqueira1-0/+1
On IGT, there is a test named amd_hotplug, and when the subtest basic is executed on DCN31, we get the following error: [drm] *ERROR* [CRTC:71:crtc-0] flip_done timed out [drm] *ERROR* flip_done timed out [drm] *ERROR* [CRTC:71:crtc-0] commit wait timed out [drm] *ERROR* flip_done timed out [drm] *ERROR* [CONNECTOR:88:DP-1] commit wait timed out [drm] *ERROR* flip_done timed out [drm] *ERROR* [PLANE:59:plane-3] commit wait timed out After enable the page flip log with the below command: echo -n 'format "[PFLIP]" +p' > /sys/kernel/debug/dynamic_debug/control It is possible to see that the flip was submitted, but DC never replied back, which generates time-out issues. This is an indication that the HUBP surface flip is missing. This commit fixes this issue by adding hubp1_set_flip_int to DCN31. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Fix access timeout to DPIA AUX at boot timeStylon Wang1-6/+6
[Why] Since introduction of patch "Query DPIA HPD status.", link detection at boot could be accessing DPIA AUX, which will not succeed until DMUB outbox messaging is enabled and results in below dmesg logs: [ 160.840227] [drm:amdgpu_dm_process_dmub_aux_transfer_sync [amdgpu]] *ERROR* wait_for_completion_timeout timeout! [How] Enable DMUB outbox messaging before link detection at boot time. Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-15drm/amdgpu: clarify DC checksAlex Deucher1-0/+1
There are several places where we don't want to check if a particular asic could support DC, but rather, if DC is enabled. Set a flag if DC is enabled and check for that rather than if a device supports DC or not. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-10drm/amd/display: delete the duplicate .set_odm_bypass initialization in ↵Liu Jian1-1/+0
dcn314_tg_funcs Fix below sparse warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_optc.c:244:18: warning: Initializer entry defined twice drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_optc.c:257:18: also defined here Fixes: 5ade1b951dec ("drm/amd/display: Add OTG/ODM functions") Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-10drm/amdgpu: Replace one-element array with flex-array memberPaulo Miguel Almeida1-3/+2
One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element array with flexible-array member in structs _ATOM_CONNECTOR_DEVICE_TAG_RECORD, _ATOM_OBJECT_GPIO_CNTL_RECORD, _ATOM_BRACKET_LAYOUT_RECORD, _ATOM_BRACKET_LAYOUT_RECORD, _ATOM_LEAKAGE_VOLTAGE_OBJECT_V3, _ATOM_FUSION_SYSTEM_INFO_V3, _ATOM_I2C_DATA_RECORD, _ATOM_I2C_DEVICE_SETUP_INFO, _ATOM_ASIC_MVDD_INFO and refactor the rest of the code accordingly. While at it, removed a redundant casting. Important to mention is that doing a build before/after this patch results in no binary output differences. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/238 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836 [1] Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-10drm/amdgpu: Use drm_mode_init() for on-stack modesVille Syrjälä1-1/+2
Initialize on-stack modes with drm_mode_init() to guarantee no stack garbage in the list head, or that we aren't copying over another mode's list head. Based on the following cocci script, with manual fixups: @decl@ identifier M; expression E; @@ - struct drm_display_mode M = E; + struct drm_display_mode M; @@ identifier decl.M; expression decl.E; statement S, S1; @@ struct drm_display_mode M; ... when != S + drm_mode_init(&M, &E); + S1 @@ expression decl.E; @@ - &*E + E Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: amd-gfx@lists.freedesktop.org Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-09drm/amd/display: only fill dirty rectangles when PSR is enabledHamza Mahfooz1-3/+4
Currently, we are calling fill_dc_dirty_rects() even if PSR isn't supported by the relevant link in amdgpu_dm_commit_planes(), this is undesirable especially because when drm.debug is enabled we are printing messages in fill_dc_dirty_rects() that are only useful for debugging PSR (and confusing otherwise). So, we can instead limit the filling of dirty rectangles to only when PSR is enabled. Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-09drm/amd/display: Enforce minimum prefetch time for low memclk on DCN32Dillon Varone10-2/+26
[WHY?] Data return times when using lowest memclk can be <= 60us, which can cause underflow on high bandwidth displays with a workload. [HOW?] Enforce a minimum prefetch time during validation for low memclk modes. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-09drm/amd/display: Fix gpio port mapping issueSteve Su2-3/+20
[Why] 1. Port of gpio has different mapping. [How] 1. Add a dummy entry in mapping table. 2. Fix incorrect mask bit field access. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Steve Su <steve.su@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-09drm/amd/display: Fix reg timeout in enc314_enable_fifoNicholas Kazlauskas1-6/+18
[Why] The link enablement sequence can end up resetting the encoder while the PHY symclk isn't yet on. This means that waiting for symclk on will timeout, along with the reset bit never asserting high. This causes unnecessary delay when enabling the link and produces a warning affecting multiple IGT tests. [How] Don't wait for the symclk to be on here because firmware already does. Don't wait for reset if we know the symclk isn't on. Split the reset into a helper function that checks the bit and decides whether or not a delay is sufficient. Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-09drm/amd/display: Fix FCLK deviation and tool compile issuesChaitanya Dhere2-2/+2
[Why] Recent backports from open source do not have header inclusion pattern that is consistent with inclusion style in the rest of the file. This breaks the internal tool builds as well. A recent commit erronously modified the original DML formula for calculating ActiveClockChangeLatencyHidingY. This resulted in a FCLK deviation from the golden values. [How] Change the way in which display_mode_vba.h is included so that it is consistent with the inclusion style in rest of the file which also fixes the tool build. Restore the DML formula to its original state to fix the FCLK deviation. Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-09drm/amd/display: Zeromem mypipe heap struct before using itAurabindo Pillai1-0/+1
[Why&How] Bug was caused when moving variable from stack to heap because it was reusable and garbage was left over, so we need to zero mem. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-06-10 05:59:36 +0000