summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)AuthorFilesLines
2018-08-27drm/amd/display: Create new i2c resourceDavid Francis18-30/+2452
[Why] I2C code did not match dc resource model and was generally unpleasant [How] Move code into new svelte dce_i2c files, replacing various i2c objects with two structs: dce_i2c_sw and dce_i2c_hw. Fully split sw and hw code paths. Remove all redundant declarations. Use address lists to distinguish between versions. Change dce80 code to newer register access macros. Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Program gamut remap as part of stream updateSivapiriyanKumarasamy2-0/+28
Add gamut remap to dc_stream_update struct, and program if set when updating streams. Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: HDR dynamic meta should be treated as stream updateKrunoslav Kovac1-1/+1
[Why] Recently we fixed HDR static meta using AFMT registers to be treated as fast stream update. Dynamic meta is still being treated as (full) surface update because it touches HUBP and it travels with pipe data. Here we change it to be (fast) stream update. Note, originally we also wanted to redesign here a bit, but without OS level support for true dynamic meta, it's left the same. We are simply using HW that can do dynamic meta to send HDR static meta, I still prefer keeping it in one static meta type then defining dynamic meta types to hold the same info. Once we know how OS interfaces look like, we can do proper design. [How] Move dyn meta update from update_hubp_dpp to commit_planes_do_stream_update Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Handle HDR meta update as fast updateKrunoslav Kovac1-7/+7
[Why] Vesa DPMS tool sends different HDR meta in OS flips without changing output parameters. We don't properly update HDR info frame: - we label HDR meta update as fast update - when updating HW info frame, we only do it if full update [How] It should still be fast update, so when doing HW infoframe update, do it always no matter the update type. Also, don't request passive flip for HDR meta update only without output transfer function or color space changed. Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Program vsc_infopacket in commit_planes_for_streamAlvin lee2-1/+3
Signed-off-by: Alvin lee <alvin.lee3@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Enable Stereo in Dal3Alvin lee8-38/+208
- program infoframe for Stereo - program stereo flip control registers properly v2: Add missing license headers Signed-off-by: Alvin lee <alvin.lee3@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Program vline interrupt on FAST updateSivapiriyanKumarasamy1-6/+7
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: decouple front and backend pgm using dpms_off as backend ↵Samson Tam5-82/+123
enable flag Signed-off-by: Samson Tam <Samson.Tam@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: add config for sending VSIFAnthony Koo3-1/+5
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Don't force UPDATE_TYPE_FULL if stream_update has ↵Harry Wentland1-3/+0
hdr_static_metadata This was missed when pushing public patch for 3e3a40b03847 (drm/amd/display: Updated HDR Static Metadata to directly take info packet raw) This is currently no problem yet since we're not doing HDR on Linux yet. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Correct rounding calcs in mod_freesync_is_valid_rangeAnthony Koo1-5/+34
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: refactor vupdate interrupt registrationAnthony Koo1-11/+8
We only need to register once OS calls the interrupt control. Also, if we are entering static screen mode, disable after ramping is done. Disable shall be done via timer of 2 seconds regardless of ramping complete or not, just to simplify. Also, ramp to mid instead of min, due to better flicker performance... Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: fix LFC tearing at top of screenAnthony Koo1-6/+0
Tearing occurred because new VTOTAL MIN/MAX was being programmed too early. The flip can happen within the VUPDATE high region, and the new min/max would take effect immediately. But this means that frame is not variable anymore, and tearing would occur when the flip actually happens. The fixed insert duration should be programmed on the first VUPDATE interrupt instead. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Add back code to allow for rounding errorAnthony Koo1-1/+12
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Fix bug that causes black screenAnthony Koo1-12/+6
Ignore MSA bit on DP display is usually set during SetTimings, but there was a case where the module thought refresh rate was not valid and ignore MSA bit was not set. Later, a valid refresh rate range was requested but since ignore MSA bit not set, it caused black screen. Issue if with how the module checked for VRR support. Fix up that logic. DM should call new valid_range function to determine if timing is supported. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Fix bug where refresh rate becomes fixedAnthony Koo2-20/+26
This issue occurs if refresh rate range is very small and lfc is not used. When frame spikes occur, refresh rate becomes fixed and will not restore properly Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: add method to check for supported rangeAnthony Koo2-6/+65
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Refactor FreeSync moduleAnthony Koo14-1670/+930
Remove dependency on internal sink map and instead use existing stream and plane state Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amdgpu: fill in amdgpu_dm_remove_sink_from_freesync_moduleHarry Wentland1-11/+29
Add code to tear down freesync modules when disabled. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: enable ABGR and XBGR formats (v4)Mauro Rossi1-0/+6
SURFACE_PIXEL_FORMAT_GRPH_ABGR8888 is supported in amd/display/dc/dc_hw_types.h and the necessary crossbars register controls to swap red and blue channels are already implemented in drm/amd/display/dc/dce/dce_mem_input.c (v4) Logic to handle new formats is added only in amdgpu_dm module. Signed-off-by: Mauro Rossi <issor.oruam@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: dc 3.1.62Tony Cheng1-1/+1
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Steven Chiu <Steven.Chiu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Remove redundant non-zero and overflow checkLeo (Sunpeng) Li1-7/+3
[Why] Unsigned int is guaranteed to be >= 0, and read_channel_reply checks for overflows. read_channel_reply also returns -1 on error, which is what dc_link_aux_transfer is expected to return on error. [How] Remove the if-statement. Return result of read_channel_reply directly. Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: add retimer log for HWQ tuning use.Charlene Liu2-1/+61
Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: fix dml handling of mono8/16 pixel formatsDmytro Laktyushkin1-2/+2
mono formats are treated exactly the same as equivallent bpp 444 formats. Dml validation however lacks 444 8 bit format while dml perf param calculation lacks mono format support This change makes them equivallent as far as the enum is concerned to avoid having to update dml Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Add dprefclk value to dce_dccgDmytro Laktyushkin2-1/+4
This allows us to avoid any vbios bugs when initializing clocks Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: fix PIP bugs on Dal3Gloria Li9-14/+46
[Why] There are outstanding bugs for PIP in Dal3: -Crash when toggling PIP visibility -Global Alpha is not working, Adjusting global alpha doesn’t have an effect -Cursor is not working with pip plane and pipe splits -One flash occurs when cursor enters PIP plane from top/bottom -Crash when moving PIP plane off the screen [How] Resolve divide by 0 error Implement global alpha Program cursor on all pipes Add dst rects' x and y offests into cursor position Disable cursor when it is beyond bottom/top edge Signed-off-by: Gloria Li <geling.li@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: dc 3.1.61Tony Cheng1-1/+1
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Steven Chiu <Steven.Chiu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Add check for num of entries in gammaVitaly Prosyak1-1/+2
This check avoids potential bugs related to gamma. Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Use DGAM ROM or RAMVitaly Prosyak3-9/+12
[Why] Optimize gamma programming [How] Use ROM for optimization when it is possible. Use RAM only when it is necessary. Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Print DPP DTN log info only for enabled pipesNikola Cornij3-2/+8
[why] There is currently a dependency on the order in which tests are executed. This is because the non-relevant state info is being printed, which results in the output based on the state from the previous test. [how] Print DPP DTN log only if the pipe is enabled. In addition to the affected per-submission DTN golden logs, included in this change is also DTN golden log update for pre-submission tests. The other DTN golden logs affected by this change will be updated upon nightly test run (which will generate the updated DTN logs). Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: correct image viewport calculationMartin Tsai1-0/+49
[why] We didn't transfer the camera/video viewport coordinate when doing rotation and mirror. [how] To correct the viewport coordinate in calculate_viewport(). Signed-off-by: Martin Tsai <Martin.Tsai@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: pass the right num of modes addedMikita Lipski1-1/+2
[why] In case if edid is null or corrupted we need to manually add a single failsafe mode (640x480). If zero modes returned DRM adds a different failsafe mode that is not accepted by DP 1.2 compliance test [how] Return the number of modes manually added Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Add support for toggling DFS bypassNicholas Kazlauskas4-6/+76
[Why] If the hardware supports DFS bypass it will always be enabled after creation of the DCCG. DFS bypass should only be enabled when the current stream consists of a single embedded panel and the minimum display clock is below the DFS bypass threshold. [How] Add a function to the DCCG table that updates the DFS bypass state when setting the bandwidth. If the DFS bypass state is changed, the clock needs to be reprogrammed to reflect this before the DPREFCLK is updated for audio endpoints. The existing display clock value is used as the target display clock value when reprogramming since the resulting change will be equal or larger to the current value. These changes only specifically target dce110 but do offer a framework for support on other applicable targets. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: David Francis <David.Francis@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Enable DFS bypass support in DC configNicholas Kazlauskas1-2/+0
[Why] We explicitly disable DFS bypass support when creating DC. Support for this feature should now be in place so it can be left implicitly enabled. [How] Remove the line that disables DFS bypass support. Note: This option was actually reset to false anyway for most of the hardware I've tested on making this particular line misleading in the first place. This patch also fixes this issue. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Set DFS bypass flags for dce110Nicholas Kazlauskas3-0/+8
[Why] While there is support for using and quering DFS bypass clocks the hardware is never notified to enter DFS bypass mode for dce110. [How] Add a flag that can be set when programming the display engine PLL to enable DFS bypass mode. If this flag is set then the hardware is notified to enter DFS bypass mode and the correct display engine clock frequency can be acquired. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: dal 3.1.60Tony Cheng1-1/+1
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Move PME to function pointer call semanticsJun Lei3-42/+65
[why] Legacy IRI style is not linux friendly. [how] New function pointer call semantics will be used for all future PPLIB/DAL interfaces, and also some existing will be refactored. This change defines how the new function pointer structures will look, as well as implements Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: pass compat_level to hubpCharlene Liu4-4/+9
Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Fix bug use wrong pp interfaceRex Zhu1-2/+10
Used wrong pp interface, the original interface is exposed by dpm on SI and paritial CI. Pointed out by Francis David <david.francis@amd.com> v2: dal only need to set min_dcefclk and min_fclk to smu. so use display_clock_voltage_request interface, instand of update all display configuration. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-21drm/amd/display: Don't build DCN1 when kcov is enabledLeo (Sunpeng) Li1-5/+3
DCN1 contains code that utilizes fp math. When CONFIG_KCOV_INSTRUMENT_ALL and CONFIG_KCOV_ENABLE_COMPARISONS are enabled, build errors are found. See this earlier patch for details: https://lists.freedesktop.org/archives/dri-devel/2018-August/186131.html As a short term solution, disable CONFIG_DRM_AMD_DC_DCN1_0 when KCOV_INSTRUMENT_ALL and KCOV_ENABLE_COMPARISONS are enabled. In addition, make it a fully derived config, taking into account CONFIG_X86. Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-21Revert "drm/amdgpu/display: Replace CONFIG_DRM_AMD_DC_DCN1_0 with CONFIG_X86"Leo (Sunpeng) Li25-57/+63
This reverts commit 8624c3c4dbfe24fc6740687236a2e196f5f4bfb0. We need CONFIG_DRM_AMD_DC_DCN1_0 to guard code that is using fp math. Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-21drm/amdgpu/display: disable eDP fast boot optimization on DCE8Alex Deucher1-1/+7
Seems to cause blank screens. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=106940 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-21drm/amd/display: fix dentist did rangesDmytro Laktyushkin1-2/+8
Dentist did ranges were incomplete as max setting has an unusual divider step up of 66. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-21drm/amd/display: make dp_ss_off optionalDmytro Laktyushkin2-3/+4
dp_ss_off flag doesn't need to be set, so we create a link_init function if it is needed by an asic Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-21drm/amd/display: fix dp_ss_control vbios flag parsingDmytro Laktyushkin1-1/+1
dp_ss_control = 0 means ss is off, we had a typo where we would double not dp_ss_control while setting dp_ss_off flag Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-21drm/amd/display: Do not retain link settingsSamson Tam1-2/+13
Do not retrain link settings if lane count and link rate are both unknown. Causes driver to be stuck reading VBIOS register after removing emulated connection. Signed-off-by: Samson Tam <Samson.Tam@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-13drm/amd/display: Guard against null crtc in CRC IRQNicholas Kazlauskas1-2/+8
[Why] A null pointer deference can occur if crtc is null in amdgpu_dm_crtc_handle_crc_irq. This can happen if get_crtc_by_otg_inst returns NULL during dm_crtc_high_irq, leading to a hang in some IGT test cases. [How] Check that CRTC is non-null before accessing its fields. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-13drm/amd/display: Pass connector id when executing VBIOS CTMikita Lipski1-2/+2
[why] Older ASICs require both phys_id and connector_id to execute bios command table. If we are not passing the right connector_id - it can lead to a black screen. [how] Set connector_obj_id when executing vbios command table Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-08-13drm/amd/display: Check if clock source in use before disablingMikita Lipski3-15/+40
[why] We are disabling clock source while other pipes are still using it, because we don't verify the number of pipes that share it. [how] - Adding a function in resources to return the number of pipes sharing the clock source. - Checking that no one is sharing the clock source before disabling Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-08-13drm/amd/display: Allow clock sharing b/w HDMI and DVIMikita Lipski1-2/+2
[why] HDMI and DVI share the same PHY clock and single link DVI and HDMI both use 4 lanes, so they should be allowed to be sharing the same clock source if all other parameters are satisfied. [how] Change a check for general DVI to Dual DVI. Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-14 23:18:06 +0000