summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display/dc/inc/hw
AgeCommit message (Collapse)AuthorFilesLines
2021-04-09drm/amd/display: Add dynamic link encoder selection.Jimmy Kizito1-0/+13
[Why] Some display endpoints may be programmably mapped to compatible link encoders. The assignment of link encoders to links has to be dynamic to accommodate the increased flexibility in comparison to conventional display endpoints. [How] - Add link encoder assignment tracking variables. - Execute link encoder assignment algorithm before enabling link and release link encoders from links once they are disabled. Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: hide VGH asic specific structsDmytro Laktyushkin1-9/+0
The pmfw structs are specific to the asic and should not be present in base clk_mgr struct v2: squash in SI fix (Alex) Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-23drm/amd/display: Enable pflip interrupt upon pipe enableQingqing Zhuo1-0/+2
[Why] pflip interrupt would not be enabled promptly if a pipe is disabled and re-enabled, causing flip_done timeout error during DP compliance tests [How] Enable pflip interrupt upon pipe enablement Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-05drm/amd/display: Process crc window at DMCUWayne Lin1-0/+21
[Why & How] Add additional MCP_SCP commands for starting/stopping updaing crc window at DMCU Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-02drm/amd/display: Update link encoder object creationJimmy Kizito1-0/+1
[Why] Currently the creation of link encoder objects is tightly coupled to the creation of link objects. Decoupling link encoder object creation is a preliminary step in the process of allowing link encoders to be dynamically assigned to links. [How] Add "minimal" link encoder objects which are not associated with any link until required. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-02drm/amd/display: Support for DMUB AUXMeenakshikumar Somasundaram1-1/+3
[WHY] To process AUX transactions with DMUB using inbox1 and outbox1 mail boxes. [HOW] 1) Added inbox1 command DMUB_CMD__DP_AUX_ACCESS to issue AUX commands to DMUB in dc_process_dmub_aux_transfer_async(). DMUB processes AUX cmd with DCN and sends reply back in an outbox1 message triggering an outbox1 interrupt to driver. 2) In existing driver implementation, AUX commands are processed synchronously by configuring DCN reg. But in DMUB AUX, driver sends an inbox1 message and waits for a conditional variable (CV) which will be signaled by outbox1 ISR. 3) As the driver holds dal and dc locks while waiting for CV, the outbox1 ISR is registered with noMutexWait set to true, which allows ISR to run and signal CV. This sets a constraint on ISR to not modify variables such as dc, dmub, etc. 4) Created dmub_outbox.c with dmub_enable_outbox_notification() to enable outbox1 mailbox. 5) New mailbox address ranges allocated for outbox1 of size DMUB_RB_SIZE. Created dmub functions for Outbox1: dmub_dcn20_setup_out_mailbox(), dmub_dcn20_get_outbox1_wptr() and dmub_dcn20_set_outbox1_rptr(). 6) Added functions dc_stat_get_dmub_notification() and dmub_srv_stat_get_notification() to retrieve Outbox1 message. 7) Currently, DMUB doesn't opens DDC in AUX mode before issuing AUX transaction. A workaround is added in dce_aux_transfer_dmub_raw() to open in DDC in AUX mode for every AUX transaction. 8) Added dc debug option enable_dmub_aux_for_legacy_ddc enable/disable DMUB AUX. This debug option is checked dce_aux_transfer_with_retries() to select the method to process AUX transactions. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-22drm/amd/display: Synchronize displays with different timingsVladimir Stempen1-0/+12
[why] Vendor based fan noise improvement [how] Report timing synchronizable when DP streams time frame difference is less than 0.05 percent. Adjust DP DTOs and sync displays using MASTER_UPDATE_LOCK_DB_X_Y Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-09drm/amd/display: Simplify bool comparisonJiapeng Chong1-2/+2
Fix the following coccicheck warning: ./drivers/gpu/drm/amd/display/dc/inc/hw/clk_mgr_internal.h:319:11-23: WARNING: Comparison to bool. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Add Freesync HDMI support to DMCUStylon Wang1-0/+10
[Why] Adding support for Freesync HDMI to DC and DMCU [How] Create DC interface and implementation on top of DMCU to support parsing CEA blocks in DMCU. Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-13drm/amd/display: enable HUBP blank behaviourBhawanpreet Lakha1-0/+1
- Reverts "drm/amd/display: Revert HUBP blank behaviour for now" - Hubp blank will fail if the pipe is locked (this is the case on linux), so add a check to make sure pipe isn't locked, if it is then defer the blank to post_unlock. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: add getter routine to retrieve mpcc muxJosip Pavic1-0/+4
[Why & How] Add function to identify which MPCC is providing input to a specified OPP Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: Interfaces for hubp blank and soft resetWesley Chalmers1-0/+2
[WHY] HUBP blanking sequence on DCN30 requires us to check if HUBP is in blank and also toggle HUBP_DISABLE, which should instead be called HUBP_SOFT_RESET for what it does in HW. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-15drm/amd/display: delay fp2 programming until vactive before lockMartin Leung1-1/+1
[Why] race condition of programming FP2 wrt pipe locking and vactive state can cause underflow/black screen [How] Enforce the FP2 is only programmed during vactive, and unlock pipe soon afterwards. Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01drm/amd/display/dc/inc/hw/dpp: Mark 'dpp_input_csc_matrix' as __maybe_unusedLee Jones1-1/+1
'dpp_input_csc_matrix' is used by some, but not all source files which include dpp.h. Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/dc/inc/hw/dpp.h:50:42: warning: ‘dpp_input_csc_matrix’ defined but not used [-Wunused-const-variable=] NB: Snipped lots of these for brevity Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amd/display: Populate hostvm parameter before DML calculationSung Lee1-0/+1
[Why] If the system does not have hostvm enabled, disabling it for DML validation will allow more modes to pass at lower voltage levels. [How] When initializing HostVM save state to hubbub and read back when populating DML pipes from context. Signed-off-by: Sung Lee <sung.lee@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-10drm/amd/display: Move common speakersToChannels definition to hw_shared.hEric Bernstein1-0/+84
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-10drm/amd/display: Engage PSR synchronouslyKrunoslav Kovac1-1/+1
[Why & How] The intended use is to force PSR into active state and ignore all events until explicit EXIT. A new event force_static is added to power module. It is then sent to FW. Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-04drm/amdgpu: fold CONFIG_DRM_AMD_DC_DCN3* into CONFIG_DRM_AMD_DC_DCN (v3)Alex Deucher11-77/+7
Avoids confusion in configurations. v2: fix build when CONFIG_DRM_AMD_DC_DCN is disabled v3: rebase on latest code Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> (v1) Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-26drm/amd/display: Define PSR ERROR Status bit VSC_SDPReza Amini1-1/+2
[why] So we can track VSC SDP errors from display [how] Define the bit, and use it in driver logic Signed-off-by: Reza Amini <Reza.Amini@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-26drm/amd/display: Raise DPG height during timing synchronizationTaimur Hassan1-0/+5
[Why] Underflow counter increases in AGM when performing some mode switches due to timing sync, which is a known hardware issue. [How] Temporarily raise DPG height during timing sync so that underflow is not reported. Signed-off-by: Taimur Hassan <syed.hassan@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amd/display: Copy WM values from set A to other sets in hw_initJoshua Aberback1-0/+2
[Why] When we transfer the WM range table to SMU, they can perform a watermark switch right away. This can be a problem if we're in not in accelerated mode during hw_init as SMU may initiate a dummy p-state change before the rest of the watermarks are programmed. Watermark set A is defined to be sufficient for all cases, so we can copy the values from set A to all other sets, avoiding any issues from SMU doing WM switches. [How] - new hubbub func init_watermarks - copy register values from set A to all other sets - call init_watermarks before calling notify_wm_ranges Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amd/display: Add dcn3.01 support to DC (v2)Roman Li3-0/+42
Update dc for vangogh support. v2: fix compilation without DCN 301 set. Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm/amd/display: Rename set_mst_bandwidth to align with DP specGeorge Shen1-1/+1
[Why] The function set_mst_bandwidth is poorly name since it isn't clear what it does, and it also does not reflect any part of the allocation sequence described in the DP spec. [How] Rename the function set_mst_bandwidth to set_throttled_vcp_size. Signed-off-by: George Shen <george.shen@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/display: Send DISPLAY_OFF after power down on bootSung Lee1-0/+2
[WHY] update_clocks might not be called on headless adapters. This means DISPLAY_OFF may not be sent in headless cases. [HOW] If hardware is powered down on boot because it is headless (mode set does not happen on that adapter) also send DISPLAY_OFF notification. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-17drm/amd/display: Add read backlight interfaceYongqiang Sun1-0/+1
[Why & How] Add read backlight interface to get ABM data. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amd/display: Fix logger contextHarry Wentland1-1/+2
[Why&How] use correct logger context Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27drm/amd/display: dce60_timing_generator: add DCE6 specific functions (v2)Mauro Rossi1-0/+11
[Why] DCE6 has CRTC_PREFETCH_EN bit in CRTC_CONTROL register DCE6 has no CRTC_LEGACY_REQUESTOR_EN bit in CRTC_START_LINE_CONTROL register DCE6 has no CRTC_CRC_CNTL register [How] Modify dce60_timing_generator_enable_advanced_request() function Add dce60_configure_crc() function and dce60_is_tg_enabled() kept as static Use dce60_configure_crc() function in dce60_tg_funcs v2: remove unused variable (Alex) Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mauro Rossi <issor.oruam@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27drm/amd/display: Rename bytes_pp to the correct bits_ppEryk Brol1-1/+1
[Why] Struct dcn_dsc_state is used for reading current state and parameters of DSC on a pipe, the target rate parameter uses bytes per pixel even though its reading BITS_PER_PIXEL register. [How] Changing it to Bits Per Pixel for consistency. Signed-off-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amd/display: Add DSC parameters logging to debugfsEryk Brol1-0/+5
[why] Need to add new parameters to debugfs logging so we will know what parameters DSC is using for debug purposes. So we are adding a read function in debugfs to read DSC status registers Signed-off-by: Eryk Brol <eryk.brol@amd.com> Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: reduce sr_xxx_time by 3 us when ppt disableChiawen Huang1-0/+1
[Why] when ppt disabled, the watermark doesn't get fine tune causing underflow. [How] It is a temporary solution to reduce sr_xxx_time by 3 us when ppt disable. Signed-off-by: Chiawen Huang <chiawen.huang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amd/display: Request PHYCLK adjustment on PHY enable/disableJoshua Aberback2-0/+5
[Why] Currently we don't explicitly send a request for a minimum PHYCLK, and we hope that the dependencies other clocks have will raise PHYCLK when needed. [How] - new clk_mgr function to keep track of PHYCLK requirements - request maximum requirement across all links - remove PHYCLK from clock state comparator, as it doesn't come from DML Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-02drm/amd/display: Preserve gpu memory allocation for life of dcJoshua Aberback1-0/+2
[Why] We want to keep the same buffer allocated for use during multiple hardware initializations. [How] - allocate gpu memory buffer on clock manager construct - free gpu memory buffer on clock manager destruct Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: add support for per-state dummy-pstate latencyJun Lei1-0/+6
[why] Dummy pstate latency actually varies between different UCLK frequencies, when calculating watermark C, if DAL always assumes worst case, then it can lead to dummy pstate not supported scenarios. [how] Rather than statically calculating dummy pstate using worst case, we store the entire table of UCLK to dummy pstate relationships. On a per mode basis, we calculate the actual UCLK lower limit, and use the dynamic worst case dummy pstate latency. This prevents the situation where we don't support full p-state (which will force high DPM), but still use low DPM dummy pstate latency. Signed-off-by: Jun Lei <jun.lei@amd.com> Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Add DCN3 ResourceBhawanpreet Lakha1-0/+9
Add support for managing resources for DCN3 Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Add DCN3 HWSEQBhawanpreet Lakha1-0/+5
Add HW sequence programing for DCN3 Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Add DCN3 DWBBhawanpreet Lakha1-0/+83
Add support to program the DCN3 DWB (Display Writeback) HW Blocks: +--------++------+ +----------+ | HUBBUB || HUBP | <-- | MMHUBBUB | +--------++------+ +----------+ | ^ v | +--------+ +--------+ | DPP | | DWB | +--------+ +--------+ | v ^ +--------+ | | MPC | | +--------+ | | | v | +-------+ | | OPP | | +-------+ | | | v | +--------+ / | OPTC | -------------- +--------+ | v +--------+ +--------+ | DIO | | DCCG | +--------+ +--------+ Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Add DCN3 MMHUBHUBBhawanpreet Lakha1-0/+3
Add support to program the DCN3 MMHUBBUB (Multimedia HUB interface) HW Blocks: +--------++------+ +----------+ | HUBBUB || HUBP | <-- | MMHUBBUB | +--------++------+ +----------+ | v +--------+ | DPP | +--------+ | v +--------+ | MPC | +--------+ | v +-------+ | OPP | +-------+ | v +--------+ | OPTC | +--------+ | v +--------+ +--------+ | DIO | | DCCG | +--------+ +--------+ Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Add DCN3 HUBPBhawanpreet Lakha1-0/+4
Add support to program the DCN3 HUBP (Display to data fabric interface pipe) HW Blocks: +--------++------+ | HUBBUB || HUBP | +--------++------+ | v +--------+ | DPP | +--------+ | v +--------+ | MPC | +--------+ | v +-------+ | OPP | +-------+ | v +--------+ | OPTC | +--------+ | v +--------+ +--------+ | DIO | | DCCG | +--------+ +--------+ Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Add DCN3 HUBHUBBhawanpreet Lakha1-0/+6
Add support to program the HUBBUB (DCN memory HUB interface) HW Blocks: +--------+ | HUBBUB | +--------+ | v +--------+ | DPP | +--------+ | v +--------+ | MPC | +--------+ | v +-------+ | OPP | +-------+ | v +--------+ | OPTC | +--------+ | v +--------+ +--------+ | DIO | | DCCG | +--------+ +--------+ Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Add DCN3 DPPBhawanpreet Lakha1-0/+7
Add support to program the DCN3 DPP (Multiple pipe and plane combine) HW Blocks: +--------+ | DPP | +--------+ | v +--------+ | MPC | +--------+ | v +-------+ | OPP | +-------+ | v +--------+ | OPTC | +--------+ | v +--------+ +--------+ | DIO | | DCCG | +--------+ +--------+ Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Add DCN3 MPCBhawanpreet Lakha1-0/+108
Add support to program the DCN3 MPC (Multiple pipe and plane combine) HW Blocks: +--------+ | MPC | +--------+ | v +-------+ | OPP | +-------+ | v +--------+ | OPTC | +--------+ | v +--------+ +--------+ | DIO | | DCCG | +--------+ +--------+ Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Add DCN3 OPTCBhawanpreet Lakha1-0/+19
Add support for programming the DCN3 OPTC (Output Timing Controller) HW Blocks: +--------+ | OPTC | +--------+ | v +--------+ +--------+ | DIO | | DCCG | +--------+ +--------+ Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Add DCN3 CLK_MGRBhawanpreet Lakha2-0/+83
Adds support for handling of clocking relevant to the DCN3 block Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Add DCN3 DIOBhawanpreet Lakha1-0/+4
Add support for the DIO (Display IO) block of DCN3, which entails our stream and link encoders. HW Blocks: +--------+ | DIO | +--------+ Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-28drm/amd/display: Remove nv12 work aroundYongqiang Sun1-3/+0
[Why] dal side nv12 wa has a lot of side effects. KMD side wa is used, so this should be remove. [How] Removed wa from dal side. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-05drm/amd/display: Move panel_cntl specific register from abm to panel_cntl.Yongqiang Sun2-14/+17
[Why] panel_cntl specific register should be access in panel_cntl object. [How] Move these register access from abm to panel_cntl. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-28drm/amd/display: Use cursor locking to prevent flip delaysAric Cyr1-0/+16
[Why] Current locking scheme for cursor can result in a flip missing its vsync, deferring it for one or more vsyncs. Result is a potential for stuttering when cursor is moved. [How] Use cursor update lock so that flips are not blocked while cursor is being programmed. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-28drm/amd/display: Add panel cntl id for set backlight level.Yongqiang Sun1-2/+3
[Why & How] Add panel cntl instance when calling set backlight. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: change from panel to panel cntlAnthony Koo1-12/+12
[Why] it doesn't represent panel specifically, it's more like the control logic for the panel [How] change from panel to panel cntl to make it a bit more clear Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: move panel power seq to new panel structAnthony Koo1-0/+53
[Why] panel power sequencer is currently just sitting in hwseq but it really it tied to internal panels [How] make a new panel struct to contain power sequencer code Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-06-28 00:12:26 +0000