summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2021-10-05drm/amdgpu/display: fix dependencies for DRM_AMD_DC_SIAlex Deucher1-0/+2
Depends on DRM_AMDGPU_SI and DRM_AMD_DC Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-05drm/amd/display: Support crc on specific regionWayne Lin1-0/+14
[Why] To support feature that calculates CRTC CRC value on specific region (crc window). [How] 1. Use debugfs to specify crtc crc window 2. Use vline0 IRQ to write crtc crc window Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-05drm/amdgpu/display: drop DCN support for aarch64Alex Deucher1-1/+1
From Ard: "Simply disabling -mgeneral-regs-only left and right is risky, given that the standard AArch64 ABI permits the use of FP/SIMD registers anywhere, and GCC is known to use SIMD registers for spilling, and may invent other uses of the FP/SIMD register file that have nothing to do with the floating point code in question. Note that putting kernel_neon_begin() and kernel_neon_end() around the code that does use FP is not sufficient here, the problem is in all the other code that may be emitted with references to SIMD registers in it. So the only way to do this properly is to put all floating point code in a separate compilation unit, and only compile that unit with -mgeneral-regs-only." Disable support until the code can be properly refactored to support this properly on aarch64. Acked-by: Will Deacon <will@kernel.org> Reported-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-04drm/amdgpu: fold CONFIG_DRM_AMD_DC_DCN3* into CONFIG_DRM_AMD_DC_DCN (v3)Alex Deucher1-26/+1
Avoids confusion in configurations. v2: fix build when CONFIG_DRM_AMD_DC_DCN is disabled v3: rebase on latest code Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> (v1) Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-30drm/amdgpu/display: remove DRM_AMD_DC_GREEN_SARDINEAlex Deucher1-8/+0
No need for a separate config option at this point. Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-26drm/amd/display: Clean up debug macrosTakashi Iwai1-0/+1
This patch simplifies the ASSERT*() and BREAK_TO_DEBUGGER() macros: - Move the dependency check of CONFIG_KGDB into Kconfig - Unify the kgdb_breakpoint() call - Drop the non-existing CONFIG_HAVE_KGDB Also align the behavior of ASSERT() macro in both cases with and without CONFIG_DEBUG_KERNEL_DC. Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-14drm/amdgpu/display: DRM_AMD_DC_DCN3_02 depends on DRM_AMD_DC_DCN3_01Alex Deucher1-0/+1
Fix this to avoid build problems if DRM_AMD_DC_DCN3_02 is defined, but DRM_AMD_DC_DCN3_01 is not. Fixes: 36d26912e8d854 ("drm/amd/display: Add support for DCN302 (v2)") Acked-by: Nirmoy Das <nirmoy.das@amd.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-12drm/amd/display: Add green_sardine support to DCRoman Li1-0/+8
Display Core support for green_sardine Signed-off-by: Roman Li <Roman.Li@amd.com> Acked-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-12drm/amd/display: Add support for DCN302 (v2)Bhawanpreet Lakha1-0/+7
- add DCN302 resource, irq service, dmub loader, - handle DC_VERSION_DCN_3_02 - define DCN302 power gating functions - handle DCN302 in GPIO files - define I2C regs - add CONFIG_DRM_AMD_DC_DCN3_02 guard v2: rebase fixes (Alex) Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amd/display: Add dcn3.01 support to DC (v2)Roman Li1-0/+9
Update dc for vangogh support. v2: fix compilation without DCN 301 set. Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-10drm/amd/display: add DCN support for aarch64Daniel Kolesa1-1/+1
This adds ARM64 support into the DCN. This mainly enables support for Navi graphics cards. The dcn10 changes haven't been tested, since I don't have the relevant hardware available, but there is no way to conditionally disable them, so I've done them anyway. Signed-off-by: Daniel Kolesa <daniel@octaforge.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-28drm/amd/display: enable SI support in the Kconfig (v2)Mauro Rossi1-0/+8
[Why] All DCE6 specific code changes are guarded by CONFIG_DRM_AMD_DC_SI Kconfig option [How] (v1) CONFIG_DRM_AMD_DC_SI configuration option is added, default setting is disabled (v2) Hainan is not supported, description updated accordingly Tested with HD7750 (Cape Verde) and HD7950 (Tahiti) Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mauro Rossi <issor.oruam@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Add DCN3 to KconfigBhawanpreet Lakha1-0/+8
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-23drm: amd/display: fix Kconfig help textRandy Dunlap1-6/+2
Fix help text: indent one tab + 2 spaces; end a sentence with a period; and collapse short lines of text to one line. Fixes: 23c61b4599c4 ("drm/amd: Fix Kconfig indentation") Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18amdgpu: Enable initial DCN support on POWERTimothy Pearson1-1/+1
DCN requires floating point support to operate. Add the appropriate x86/ppc64 guards and FPU / AltiVec / VSX context switches to DCN. Note that the current DC20 code doesn't contain all required FPU wrappers on x86 or POWER, so this patch is insufficient to fully enable DC20 on POWER. v2: s/X86_64/X86/g to retain previous behavior. Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11drm/amdgpu: fix license on Kconfig and MakefilesAlex Deucher1-1/+1
amdgpu is MIT licensed. Fixes: ec8f24b7faaf3d ("treewide: Add SPDX license identifier - Makefile/Kconfig") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-13drm/amd/display: rename DCN1_0 kconfig to DCNBhawanpreet Lakha1-2/+2
Since dcn20 and dcn21 are under dcn1 it doesnt make sense to have it named dcn1. Change it to "dcn" to make it generic Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-13drm/amd/display: Drop CONFIG_DRM_AMD_DC_DCN2_1 flagBhawanpreet Lakha1-17/+1
[Why] DCN21 is stable enough to be build by default. So drop the flags. [How] Remove them using the unifdef tool. The following commands were executed in sequence: $ find -name '*.c' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DCN2_1 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_1 '{}' ';' $ find -name '*.h' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DCN2_1 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_1 '{}' ';' In addition: * Remove from kconfig, and replace any dependencies with DCN1_0. * Remove from any makefiles. * Fix and cleanup Renoir definitions in dal_asic_id.h * Expand DCN1 ifdef to include DCN21 code in the following files: * clk_mgr/clk_mgr.c: dc_clk_mgr_create() * core/dc_resources.c: dc_create_resource_pool() * gpio/hw_factory.c: dal_hw_factory_init() * gpio/hw_translate.c: dal_hw_translate_init() Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-13drm/amd/display: Drop CONFIG_DRM_AMD_DC_DCN2_0 and DSC_SUPPORTEDBhawanpreet Lakha1-12/+1
[Why] DCN2 and DSC are stable enough to be build by default. So drop the flags. [How] Remove them using the unifdef tool. The following commands were executed in sequence: $ find -name '*.c' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DSC_SUPPORT -DCONFIG_DRM_AMD_DC_DCN2_0 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_0 '{}' ';' $ find -name '*.h' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DSC_SUPPORT -DCONFIG_DRM_AMD_DC_DCN2_0 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_0 '{}' ';' In addition: * Remove from kconfig, and replace any dependencies with DCN1_0. * Remove from any makefiles. * Fix and cleanup NV defninitions in dal_asic_id.h * Expand DCN1 ifdef to include DCN2 code in the following files: * clk_mgr/clk_mgr.c: dc_clk_mgr_create() * core/dc_resources.c: dc_create_resource_pool() * dce/dce_dmcu.c: dcn20_*lock_phy() * dce/dce_dmcu.c: dcn20_funcs * dce/dce_dmcu.c: dcn20_dmcu_create() * gpio/hw_factory.c: dal_hw_factory_init() * gpio/hw_translate.c: dal_hw_translate_init() Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-13drm/amd/display: Drop CONFIG_DRM_AMD_DC_DMUB guardsNicholas Kazlauskas1-6/+0
[Why] Support for DMUB only depends on support for DC. It doesn't use floating point so we don't need to guard it by any specific DCN revision. [How] Drop the guards and cleanup the newlines around each one. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-13drm/amd/display: Add the DMUB serviceNicholas Kazlauskas1-0/+6
The DMUB service is the interface to the DMCUB. It's required to support Renoir features so it will be enabled and compiled automatically when the Renoir display engine is enabled via CONFIG_DRM_AMD_DC_DCN2_1. DMUB code will initially be guarded by CONFIG_DRM_AMD_DC_DMUB and later switched to CONFIG_DRM_AMD_DC_DCN2_1 with the config option dropped. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-07drm/amd: Fix Kconfig indentationKrzysztof Kozlowski1-16/+16
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: Add hdcp to KconfigBhawanpreet Lakha1-0/+8
[Why] HDCP is not fully finished, so we need to be able to build and run the driver without it. [How] Add a Kconfig to toggle it Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-29drm/amd/display: add Renoir to kconfigBhawanpreet Lakha1-0/+8
Add a kconfig option to enable renoir. Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-11drm/amd/display: Add drm_audio_component support to amdgpu_dmNicholas Kazlauskas1-0/+1
[Why] The drm_audio_component can be used to give pin ELD notifications directly to the sound driver. This fixes audio endpoints disappearing due to missing unsolicited notifications. [How] Send the notification via the audio component whenever we enable or disable audio state on a stream. This matches what i915 does with their drm_audio_component and what Takashi Iwai's proposed hack for radeon/amdpgu did. This is a bit delayed in when the notification actually occurs, however. We wait until after all the programming is complete rather than sending the notification mid sequence. Particular care is needed for the get ELD callback since it can happen outside the locking and fencing DRM does for atomic commits. Cc: Leo Li <sunpeng.li@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: enable DSC support by defaultHawking Zhang1-1/+1
Enable DSC (display stream compression) by default. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Add DSC support for Navi (v2)Harry Wentland1-0/+10
Add support for DCN2 DSC (Display Stream Compression) HW Blocks: +--------++------+ +----------+ | HUBBUB || HUBP | <-- | MMHUBBUB | +--------++------+ +----------+ | ^ v | +--------+ +--------+ | DPP | | DWB | +--------+ +--------+ | v ^ +--------+ | | MPC | | +--------+ | | | v | +-------+ +-------+ | | OPP | <--> | DSC | | +-------+ +-------+ | | | v | +--------+ / | OPTC | -------------- +--------+ | v +--------+ +--------+ | DIO | | DCCG | +--------+ +--------+ v2: rebase (Alex) Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Hook DCN2 into amdgpu_dm and expose as config (v2)Harry Wentland1-0/+9
Enable DCN2 support in DM (Display Manager). v2: fix spurious raven change (Alex) Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31Merge branch 'drm-next-5.3' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie1-6/+0
into drm-next New stuff for 5.3: - Add new thermal sensors for vega asics - Various RAS fixes - Add sysfs interface for memory interface utilization - Use HMM rather than mmu notifier for user pages - Expose xgmi topology via kfd - SR-IOV fixes - Fixes for manual driver reload - Add unique identifier for vega asics - Clean up user fence handling with UVD/VCE/VCN blocks - Convert DC to use core bpc attribute rather than a custom one - Add GWS support for KFD - Vega powerplay improvements - Add CRC support for DCE 12 - SR-IOV support for new security policy - Various cleanups From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190529220944.14464-1-alexander.deucher@amd.com
2019-05-24drm/amd/display: Drop DCN1_01 guardsHarry Wentland1-6/+0
[WHY] These were only needed for bringup. They're not needed anymore. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-14drm/amd/display: Add DC config flag for Raven2 (v2)Bhawanpreet Lakha1-0/+6
Add DRM_AMD_DC_DCN1_01 config flag for Raven2 v2: Make DC select DRM_AMD_DC_DCN1_01 (Alex) Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-21drm/amd/display: Don't build DCN1 when kcov is enabledLeo (Sunpeng) Li1-5/+3
DCN1 contains code that utilizes fp math. When CONFIG_KCOV_INSTRUMENT_ALL and CONFIG_KCOV_ENABLE_COMPARISONS are enabled, build errors are found. See this earlier patch for details: https://lists.freedesktop.org/archives/dri-devel/2018-August/186131.html As a short term solution, disable CONFIG_DRM_AMD_DC_DCN1_0 when KCOV_INSTRUMENT_ALL and KCOV_ENABLE_COMPARISONS are enabled. In addition, make it a fully derived config, taking into account CONFIG_X86. Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-21Revert "drm/amdgpu/display: Replace CONFIG_DRM_AMD_DC_DCN1_0 with CONFIG_X86"Leo (Sunpeng) Li1-0/+8
This reverts commit 8624c3c4dbfe24fc6740687236a2e196f5f4bfb0. We need CONFIG_DRM_AMD_DC_DCN1_0 to guard code that is using fp math. Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-19drm/amdgpu/display: Replace CONFIG_DRM_AMD_DC_DCN1_0 with CONFIG_X86Michel Dänzer1-8/+0
Allowing CONFIG_DRM_AMD_DC_DCN1_0 to be disabled on X86 was an opportunity for display with Raven Ridge accidentally not working. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-06-15drm/amdgpu/display: enable CONFIG_DRM_AMD_DC_DCN1_0 by defaultAlex Deucher1-0/+1
It's required for displays on Raven. The DCN bandwidth calcs use floating point, but DCN is APU only and it already depends on X86. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-06-15drm/amdgpu/display: drop DRM_AMD_DC_FBC kconfig optionAlex Deucher1-10/+0
Just enable it always. This was leftover from feature bring up. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-18drm/amdgpu/display: remove VEGA20 config optionAlex Deucher1-8/+0
Leftover from bringup. No need to keep it around for upstream. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-18drm/amdgpu/display: remove VEGAM config optionAlex Deucher1-7/+0
Leftover from bringup. No need to keep it around for upstream. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-17drm/amd/display: Add Vega20 config. supportJerry (Fangzhi) Zuo1-0/+9
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-15drm/amd/display: Implement VEGAM device IDs in DCJerry (Fangzhi) Zuo1-0/+6
Implement device IDs for VEGAM Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-15drm/amd/display: Remove PRE_VEGA flagHarry Wentland1-8/+0
We enabled this upstream by default now and no longer need the flag. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-16amdgpu/dm: Default PRE_VEGA ASIC support to 'y'Harry Wentland1-1/+1
Even though we default PRE_VEGA support to 'n' upstream in amd-staging we want to keep it enabled by default. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-10-21drm/amd/display: make FBC configurable optionShirish S1-0/+10
Currently FBC is guarded with ENABLE_FBC macro, which needs to be manually enabled in Makefile. This patch moves it to Kconfig so that there wont be any need to additional patch to be carried for enabling or disabling on every SoC. Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amd/display: Clean Kconfig formattingHarry Wentland1-5/+5
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amd/display: Limit DCN to x86 archHarry Wentland1-1/+1
DCN bw calcs currently rely on the following gcc options: -mhard-float -msse -mpreferred-stack-boundary=4 We probably shouldn't really try building this on architectures other than x86. CC: Alex Deucher <Alexander.Deucher@amd.com> CC: Christian König <christian.koenig@amd.com> CC: Michel Dänzer <michel.daenzer@amd.com> CC: Tony Cheng <Tony.Cheng@amd.com> CC: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amdgpu/display: Enable DCN in DCAlex Deucher1-0/+7
Enable DCN in DC. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amd/display: Remove DCE12 guardsAlex Deucher1-7/+0
Signed-off-by: Jordan Lazare <Jordan.Lazare@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amd/display: Enable DCE12 supportAlex Deucher1-0/+7
This wires DCE12 support into DC and enables it. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amd/dc: Add dc display driver (v2)Harry Wentland1-0/+28
Supported DCE versions: 8.0, 10.0, 11.0, 11.2 v2: rebase against 4.11 Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-17 23:07:52 +0000