summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/amdgpu
AgeCommit message (Collapse)AuthorFilesLines
2020-07-30Revert "drm/amdgpu: Fix NULL dereference in dpm sysfs handlers"Alex Deucher1-3/+6
This regressed some working configurations so revert it. Will fix this properly for 5.9 and backport then. This reverts commit 38e0c89a19fd13f28d2b4721035160a3e66e270b. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-07-30drm/amdgpu: Prevent kernel-infoleak in amdgpu_info_ioctl()Peilin Ye1-1/+2
Compiler leaves a 4-byte hole near the end of `dev_info`, causing amdgpu_info_ioctl() to copy uninitialized kernel stack memory to userspace when `size` is greater than 356. In 2015 we tried to fix this issue by doing `= {};` on `dev_info`, which unfortunately does not initialize that 4-byte hole. Fix it by using memset() instead. Cc: stable@vger.kernel.org Fixes: c193fa91b918 ("drm/amdgpu: information leak in amdgpu_info_ioctl()") Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)") Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amdgpu: Fix NULL dereference in dpm sysfs handlersPaweł Gronowski1-6/+3
NULL dereference occurs when string that is not ended with space or newline is written to some dpm sysfs interface (for example pp_dpm_sclk). This happens because strsep replaces the tmp with NULL if the delimiter is not present in string, which is then dereferenced by tmp[0]. Reproduction example: sudo sh -c 'echo -n 1 > /sys/class/drm/card0/device/pp_dpm_sclk' Signed-off-by: Paweł Gronowski <me@woland.xyz> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-07-14drm/amdgpu/sdma5: fix wptr overwritten in ->get_wptr()Xiaojie Yuan1-18/+8
"u64 *wptr" points to the the wptr value in write back buffer and "*wptr = (*wptr) >> 2;" results in the value being overwritten each time when ->get_wptr() is called. umr uses /sys/kernel/debug/dri/0/amdgpu_ring_sdma0 to get rptr/wptr and decode ring content and it is affected by this issue. fix and simplify the logic similar as sdma_v4_0_ring_get_wptr(). v2: fix for sdma5.2 as well v3: drop sdma 5.2 changes for 5.8 and stable Suggested-by: Le Ma <le.ma@amd.com> Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-07-14drm/amdgpu: fix preemption unit testJack Xiao1-5/+15
Remove signaled jobs from job list and ensure the job was indeed preempted. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amdgpu/gfx10: fix race condition for kiqJack Xiao1-1/+8
During preemption test for gfx10, it uses kiq to trigger gfx preemption, which would result in race condition with flushing TLB for kiq. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-09drm/amdgpu: don't do soft recovery if gpu_recovery=0Marek Olšák1-1/+2
It's impossible to debug shader hangs with soft recovery. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-07-09drm/amdgpu: add TMR destory function for pspHuang Rui1-4/+53
TMR is required to be destoried with GFX_CMD_ID_DESTROY_TMR while the system goes to suspend. Otherwise, PSP may return the failure state (0xFFFF007) on Gfx-2-PSP command GFX_CMD_ID_SETUP_TMR after do multiple times suspend/resume. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-07-09drm/amdgpu: asd function needs to be unloaded in suspend phaseHuang Rui1-0/+6
Unload ASD function in suspend phase. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-07-01drm/amdgpu: use %u rather than %d for sclk/mclkAlex Deucher1-2/+2
Large clock values may overflow and show up as negative. Reported by prOMiNd on IRC. Acked-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-07-01drm/amdgpu/atomfirmware: fix vram_info fetching for renoirAlex Deucher1-0/+1
Renoir uses integrated_system_info table v12. The table has the same layout as v11 with respect to this data. Just reuse the existing code for v12 for stable. Fixes incorrectly reported vram info in the driver output. Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-06-24drm/amdgpu: add fw release for sdma v5_0Wenhui Sheng1-1/+5
sdma fw isn't released when module exit Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-06-19Merge tag 'amd-drm-fixes-5.8-2020-06-17' of ↵Dave Airlie1-2/+2
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.8-2020-06-17: amdgpu: - Fix kvfree/kfree mixup - Fix hawaii device id in powertune configuration - Display FP fixes - Documentation fixes amdkfd: - devcgroup check fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200617220733.3773183-1-alexander.deucher@amd.com
2020-06-17drm/amdgpu: fix documentation around busy_percentageAlex Deucher1-1/+1
Add rename the gpu busy percentage for consistency and add the mem busy percentage documentation. Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-06-17drm/amdgpu/pm: update comment to clarify Overdrive interfacesAlex Deucher1-1/+1
Vega10 and previous asics use one interface, vega20 and newer use another. Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-06-11amdgpu: a NULL ->mm does not mean a thread is a kthreadChristoph Hellwig1-1/+1
Use the proper API instead. Fixes: 70539bd795002 ("drm/amd: Update MEC HQD loading code for KFD") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: http://lkml.kernel.org/r/20200404094101.672954-1-hch@lst.de Link: http://lkml.kernel.org/r/20200404094101.672954-2-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-10kernel: better document the use_mm/unuse_mm API contractChristoph Hellwig1-2/+2
Switch the function documentation to kerneldoc comments, and add WARN_ON_ONCE asserts that the calling thread is a kernel thread and does not have ->mm set (or has ->mm set in the case of unuse_mm). Also give the functions a kthread_ prefix to better document the use case. [hch@lst.de: fix a comment typo, cover the newly merged use_mm/unuse_mm caller in vfio] Link: http://lkml.kernel.org/r/20200416053158.586887-3-hch@lst.de [sfr@canb.auug.org.au: powerpc/vas: fix up for {un}use_mm() rename] Link: http://lkml.kernel.org/r/20200422163935.5aa93ba5@canb.auug.org.au Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Jens Axboe <axboe@kernel.dk> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [usb] Acked-by: Haren Myneni <haren@linux.ibm.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Felipe Balbi <balbi@kernel.org> Cc: Jason Wang <jasowang@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Link: http://lkml.kernel.org/r/20200404094101.672954-6-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-10kernel: move use_mm/unuse_mm to kthread.cChristoph Hellwig6-8/+1
Patch series "improve use_mm / unuse_mm", v2. This series improves the use_mm / unuse_mm interface by better documenting the assumptions, and my taking the set_fs manipulations spread over the callers into the core API. This patch (of 3): Use the proper API instead. Link: http://lkml.kernel.org/r/20200404094101.672954-1-hch@lst.de These helpers are only for use with kernel threads, and I will tie them more into the kthread infrastructure going forward. Also move the prototypes to kthread.h - mmu_context.h was a little weird to start with as it otherwise contains very low-level MM bits. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Jens Axboe <axboe@kernel.dk> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Felipe Balbi <balbi@kernel.org> Cc: Jason Wang <jasowang@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: http://lkml.kernel.org/r/20200404094101.672954-1-hch@lst.de Link: http://lkml.kernel.org/r/20200416053158.586887-1-hch@lst.de Link: http://lkml.kernel.org/r/20200404094101.672954-5-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mmap locking API: convert mmap_sem commentsMichel Lespinasse3-3/+3
Convert comments that reference mmap_sem to reference mmap_lock instead. [akpm@linux-foundation.org: fix up linux-next leftovers] [akpm@linux-foundation.org: s/lockaphore/lock/, per Vlastimil] [akpm@linux-foundation.org: more linux-next fixups, per Michel] Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-13-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mmap locking API: use coccinelle to convert mmap_sem rwsem call sitesMichel Lespinasse2-7/+7
This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-08Merge tag 'drm-next-2020-06-08' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-0/+171
Pull drm fixes from Dave Airlie: "These are the fixes from last week for the stuff merged in the merge window. It got a bunch of nouveau fixes for HDA audio on some new GPUs, some i915 and some amdpgu fixes. i915: - gvt: Fix one clang warning on debug only function - Use ARRAY_SIZE for coccicheck warning - Use after free fix for display global state. - Whitelisting context-local timestamp on Gen9 and two scheduler fixes with deps (Cc: stable) - Removal of write flag from sysfs files where ineffective nouveau: - HDMI/DP audio HDA fixes - display hang fix for Volta/Turing - GK20A regression fix. amdgpu: - Prevent hwmon accesses while GPU is in reset - CTF interrupt fix - Backlight fix for renoir - Fix for display sync groups - Display bandwidth validation workaround" * tag 'drm-next-2020-06-08' of git://anongit.freedesktop.org/drm/drm: (28 commits) drm/nouveau/kms/nv50-: clear SW state of disabled windows harder drm/nouveau: gr/gk20a: Use firmware version 0 drm/nouveau/disp/gm200-: detect and potentially disable HDA support on some SORs drm/nouveau/disp/gp100: split SOR implementation from gm200 drm/nouveau/disp: modify OR allocation policy to account for HDA requirements drm/nouveau/disp: split part of OR allocation logic into a function drm/nouveau/disp: provide hint to OR allocation about HDA requirements drm/amd/display: Revalidate bandwidth before commiting DC updates drm/amdgpu/display: use blanked rather than plane state for sync groups drm/i915/params: fix i915.fake_lmem_start module param sysfs permissions drm/i915/params: don't expose inject_probe_failure in debugfs drm/i915: Whitelist context-local timestamp in the gen9 cmdparser drm/i915: Fix global state use-after-frees with a refcount drm/i915: Check for awaits on still currently executing requests drm/i915/gt: Do not schedule normal requests immediately along virtual drm/i915: Reorder await_execution before await_request drm/nouveau/kms/gt215-: fix race with audio driver runpm drm/nouveau/disp/gm200-: fix NV_PDISP_SOR_HDMI2_CTRL(n) selection Revert "drm/amd/display: disable dcn20 abm feature for bring up" drm/amd/powerplay: ack the SMUToHost interrupt on receive V2 ...
2020-06-02Merge tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drmLinus Torvalds136-3279/+7206
Pull drm updates from Dave Airlie: "Highlights: - Core DRM had a lot of refactoring around managed drm resources to make drivers simpler. - Intel Tigerlake support is on by default - amdgpu now support p2p PCI buffer sharing and encrypted GPU memory Details: core: - uapi: error out EBUSY when existing master - uapi: rework SET/DROP MASTER permission handling - remove drm_pci.h - drm_pci* are now legacy - introduced managed DRM resources - subclassing support for drm_framebuffer - simple encoder helper - edid improvements - vblank + writeback documentation improved - drm/mm - optimise tree searches - port drivers to use devm_drm_dev_alloc dma-buf: - add flag for p2p buffer support mst: - ACT timeout improvements - remove drm_dp_mst_has_audio - don't use 2nd TX slot - spec recommends against it bridge: - dw-hdmi various improvements - chrontel ch7033 support - fix stack issues with old gcc hdmi: - add unpack function for drm infoframe fbdev: - misc fbdev driver fixes i915: - uapi: global sseu pinning - uapi: OA buffer polling - uapi: remove generated perf code - uapi: per-engine default property values in sysfs - Tigerlake GEN12 enabled. - Lots of gem refactoring - Tigerlake enablement patches - move to drm_device logging - Icelake gamma HW readout - push MST link retrain to hotplug work - bandwidth atomic helpers - ICL fixes - RPS/GT refactoring - Cherryview full-ppgtt support - i915 locking guidelines documented - require linear fb stride to be 512 multiple on gen9 - Tigerlake SAGV support amdgpu: - uapi: encrypted GPU memory handling - uapi: add MEM_SYNC IB flag - p2p dma-buf support - export VRAM dma-bufs - FRU chip access support - RAS/SR-IOV updates - Powerplay locking fixes - VCN DPG (powergating) enablement - GFX10 clockgating fixes - DC fixes - GPU reset fixes - navi SDMA fix - expose FP16 for modesetting - DP 1.4 compliance fixes - gfx10 soft recovery - Improved Critical Thermal Faults handling - resizable BAR on gmc10 amdkfd: - uapi: GWS resource management - track GPU memory per process - report PCI domain in topology radeon: - safe reg list generator fixes nouveau: - HD audio fixes on recent systems - vGPU detection (fail probe if we're on one, for now) - Interlaced mode fixes (mostly avoidance on Turing, which doesn't support it) - SVM improvements/fixes - NVIDIA format modifier support - Misc other fixes. adv7511: - HDMI SPDIF support ast: - allocate crtc state size - fix double assignment - fix suspend bochs: - drop connector register cirrus: - move to tiny drivers. exynos: - fix imported dma-buf mapping - enable runtime PM - fixes and cleanups mediatek: - DPI pin mode swap - config mipi_tx current/impedance lima: - devfreq + cooling device support - task handling improvements - runtime PM support pl111: - vexpress init improvements - fix module auto-load rcar-du: - DT bindings conversion to YAML - Planes zpos sanity check and fix - MAINTAINERS entry for LVDS panel driver mcde: - fix return value mgag200: - use managed config init stm: - read endpoints from DT vboxvideo: - use PCI managed functions - drop WC mtrr vkms: - enable cursor by default rockchip: - afbc support virtio: - various cleanups qxl: - fix cursor notify port hisilicon: - 128-byte stride alignment fix sun4i: - improved format handling" * tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drm: (1401 commits) drm/amd/display: Fix potential integer wraparound resulting in a hang drm/amd/display: drop cursor position check in atomic test drm/amdgpu: fix device attribute node create failed with multi gpu drm/nouveau: use correct conflicting framebuffer API drm/vblank: Fix -Wformat compile warnings on some arches drm/amdgpu: Sync with VM root BO when switching VM to CPU update mode drm/amd/display: Handle GPU reset for DC block drm/amdgpu: add apu flags (v2) drm/amd/powerpay: Disable gfxoff when setting manual mode on picasso and raven drm/amdgpu: fix pm sysfs node handling (v2) drm/amdgpu: move gpu_info parsing after common early init drm/amdgpu: move discovery gfx config fetching drm/nouveau/dispnv50: fix runtime pm imbalance on error drm/nouveau: fix runtime pm imbalance on error drm/nouveau: fix runtime pm imbalance on error drm/nouveau/debugfs: fix runtime pm imbalance on error drm/nouveau/nouveau/hmm: fix migrate zero page to GPU drm/nouveau/nouveau/hmm: fix nouveau_dmem_chunk allocations drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST drm/nouveau/kms/nv50-: Move 8BPC limit for MST into nv50_mstc_get_modes() ...
2020-06-02Merge tag 'for-linus-hmm' of ↵Linus Torvalds1-38/+18
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull hmm updates from Jason Gunthorpe: "This series adds a selftest for hmm_range_fault() and several of the DEVICE_PRIVATE migration related actions, and another simplification for hmm_range_fault()'s API. - Simplify hmm_range_fault() with a simpler return code, no HMM_PFN_SPECIAL, and no customizable output PFN format - Add a selftest for hmm_range_fault() and DEVICE_PRIVATE related functionality" * tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: MAINTAINERS: add HMM selftests mm/hmm/test: add selftests for HMM mm/hmm/test: add selftest driver for HMM mm/hmm: remove the customizable pfn format from hmm_range_fault mm/hmm: remove HMM_PFN_SPECIAL drm/amdgpu: remove dead code after hmm_range_fault() mm/hmm: make hmm_range_fault return 0 or -1
2020-06-01Merge branches 'pm-core' and 'pm-sleep'Rafael J. Wysocki1-1/+1
* pm-core: PM: runtime: Replace pm_runtime_callbacks_present() PM: runtime: clk: Fix clk_pm_runtime_get() error path PM: runtime: Make clear what we do when conditions are wrong in rpm_suspend() * pm-sleep: PM: hibernate: Restrict writes to the resume device PM: hibernate: Split off snapshot dev option PM: hibernate: Incorporate concurrency handling PM: sleep: Helpful edits for devices.rst documentation Documentation: PM: sleep: Update driver flags documentation PM: sleep: core: Rename DPM_FLAG_LEAVE_SUSPENDED PM: sleep: core: Rename DPM_FLAG_NEVER_SKIP PM: sleep: core: Rename dev_pm_smart_suspend_and_suspended() PM: sleep: core: Rename dev_pm_may_skip_resume() PM: sleep: core: Rework the power.may_skip_resume handling PM: sleep: core: Do not skip callbacks in the resume phase PM: sleep: core: Fold functions into their callers PM: sleep: core: Simplify the SMART_SUSPEND flag handling
2020-05-29drm/amdgpu/pm: return an error during GPU reset or suspend (v2)Alex Deucher1-0/+171
Return an error for sysfs and debugfs power interfaces during gpu reset and suspend. Prevents access to the hw while it may be in an unusable state. v2: squash in fix to drop suspend check Acked-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-26drm/amdgpu: fix device attribute node create failed with multi gpuKevin Wang3-41/+58
the origin design will use varible of "attr->states" to save node supported states on current gpu device, but for multi gpu device, when probe second gpu device, the driver will check attribute node states from previous gpu device wthether to create attribute node. it will cause other gpu device create attribute node faild. 1. add member attr_list into amdgpu_device to link supported device attribute node. 2. add new structure "struct amdgpu_device_attr_entry{}" to track device attribute state. 3. drop member "states" from amdgpu_device_attr. v2: 1. move "attr_list" into amdgpu_pm and rename to "pm_attr_list". 2. refine create & remove device node functions parameter. fix: drm/amdgpu: optimize amdgpu device attribute code Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-22drm/amdgpu: Sync with VM root BO when switching VM to CPU update modeFelix Kuehling1-2/+9
This fixes an intermittent bug where a root PD clear operation still in progress could overwrite a PDE update done by the CPU, resulting in a VM fault. Fixes: 108b4d928c03 ("drm/amd/amdgpu: Update VM function pointer") Reported-by: Jay Cornwall <Jay.Cornwall@amd.com> Tested-by: Jay Cornwall <Jay.Cornwall@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-22drm/amdgpu: add apu flags (v2)Alex Deucher12-28/+38
Add some APU flags to simplify handling of different APU variants. It's easier to understand the special cases if we use names flags rather than checking device ids and silicon revisions. v2: rebase on latest code Acked-by: Evan Quan <evan.quan@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-22drm/amd/powerpay: Disable gfxoff when setting manual mode on picasso and ravenchen gong1-0/+9
[Problem description] 1. Boot up picasso platform, launches desktop, Don't do anything (APU enter into "gfxoff" state) 2. Remote login to platform using SSH, then type the command line: sudo su -c "echo manual > /sys/class/drm/card0/device/power_dpm_force_performance_level" sudo su -c "echo 2 > /sys/class/drm/card0/device/pp_dpm_sclk" (fix SCLK to 1400MHz) 3. Move the mouse around in Window 4. Phenomenon : The screen frozen Tester will switch sclk level during glmark2 run time. APU will enter "gfxoff" state intermittently during glmark2 run time. The system got hanged if fix GFXCLK to 1400MHz when APU is in "gfxoff" state. [Debug] 1. Fix SCLK to X MHz 1400: screen frozen, screen black, then OS will reboot. 1300: screen frozen. 1200: screen frozen, screen black. 1100: screen frozen, screen black, then OS will reboot. 1000: screen frozen, screen black. 900: screen frozen, screen black, then OS will reboot. 800: Situation Nomal, issue disappear. 700: Situation Nomal, issue disappear. 2. SBIOS setting: AMD CBS --> SMU Debug Options -->SMU Debug --> "GFX DLDO Psm Margin Control": 50 : Situation Nomal, issue disappear. 45 : Situation Nomal, issue disappear. 40 : Situation Nomal, issue disappear. 35 : Situation Nomal, issue disappear. 30 : screen black. 25 : screen frozen, then blurred screen. 20 : screen frozen. 15 : screen black. 10 : screen frozen. 5 : screen frozen, then blurred screen. 3. Disable GFXOFF feature Situation Nomal, issue disappear. [Why] Through a period of time debugging with Sys Eng team and SMU team, Sys Eng team said this is voltage/frequency marginal issue not a F/W or H/W bug. This experiment proves that default targetPsm [for f=1400MHz] is not sufficient when GFXOFF is enabled on Picasso. SMU team think it is an odd test conditions to force sclk="1400MHz" when GPU is in "gfxoff" state，then wake up the GFX. SCLK should be in the "lowest frequency" when gfxoff. [How] Disable gfxoff when setting manual mode. Enable gfxoff when setting other mode(exiting manual mode) again. By the way, from the user point of view, now that user switch to manual mode and force SCLK Frequency, he don't want SCLK be controlled by workload.It becomes meaningless to "switch to manual mode" if APU enter "gfxoff" due to lack of workload at this point. Tips: Same issue observed on Raven. Signed-off-by: chen gong <curry.gong@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-22drm/amdgpu: fix pm sysfs node handling (v2)Alex Deucher1-4/+4
Fix typos that prevented them from showing up. v2: switch other files in addition to pp_clk_voltage Fixes: 4e01847c38f7a5 ("drm/amdgpu: optimize amdgpu device attribute code") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1150 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Evan Quan <evan.quan@amd.com>
2020-05-22drm/amdgpu: move gpu_info parsing after common early initAlex Deucher1-4/+4
We need to get the silicon revision id before we parse the firmware in order to load the correct gpu info firmware for raven2 variants. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1103 Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-22drm/amdgpu: move discovery gfx config fetchingAlex Deucher1-4/+3
Move it into the fw_info function since it's logically part of the same functionality. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-21drm/amdgpu: resize VRAM BAR for CPU access on gfx10Alan Swanson1-4/+10
Try to resize BAR0 to let CPU access all of VRAM on Navi. Syncs code with previous gfx generations from commit d6895ad39f3b39 ("drm/amdgpu: resize VRAM BAR for CPU access v6"). Signed-off-by: Alan Swanson <reiver@improbability.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-21drm/amdgpu: drop navi pcie bw callbackAlex Deucher1-8/+0
It's not implemented yet so just drop it so the sysfs pcie bw file returns an appropriate error instead of garbage. Reviewed-by: Yong Zhao <Yong.Zhao@amd.com> Reviewed-By: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-21drm/amdgpu: improve error handling in pcie_bwAlex Deucher1-1/+7
1. Initialize the counters to 0 in case the callback fails to initialize them. 2. The counters don't exist on APUs so return an error for them. 3. Return an error if the callback doesn't exist. Reviewed-by: Yong Zhao <Yong.Zhao@amd.com> Reviewed-By: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-21drm/amdkfd: fix restore worker race conditionPhilip Yang1-3/+3
In free memory of gpu path, remove bo from validate_list to make sure restore worker don't access the BO any more, then unregister bo MMU interval notifier. Otherwise, the restore worker will crash in the middle of validating BO user pages if MMU interval notifer is gone. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-21drm/amdgpu: off by one in amdgpu_device_attr_create_groups() error handlingDan Carpenter1-2/+1
This loop in the error handling code should start a "i - 1" and end at "i == 0". Currently it starts a "i" and ends at "i == 1". The result is that it removes one attribute that wasn't created yet, and leaks the zeroeth attribute. Fixes: 4e01847c38f7 ("drm/amdgpu: optimize amdgpu device attribute code") Acked-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-21drm/amdgpu: add condition to set MP1 state on gpu resetLikun Gao1-1/+2
Only ras supportted need to set MP1 state to prepare for unload before reloading SMU FW. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-21drm/amdgpu fix incorrect sysfs remove behavior for xgmiJack Zhang1-7/+16
Under xgmi setup,some sysfs fail to create for the second time of kmd driver loading. It's due to sysfs nodes are not removed appropriately in the last unlod time. Changes of this patch: 1. remove sysfs for dev_attr_xgmi_error 2. remove sysfs_link adev->dev->kobj with target name. And it only needs to be removed once for a xgmi setup 3. remove sysfs_link hive->kobj with target name In amdgpu_xgmi_remove_device: 1. amdgpu_xgmi_sysfs_rem_dev_info needs to be run per device 2. amdgpu_xgmi_sysfs_destroy needs to be run on the last node of device. v2: initialize array with memset Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-21drm/amdgpu/vcn2.5: Remove old DPG workaroundJames Zhu1-9/+0
SCRATCH2 is used to keep decode wptr as a workaround which fix a hardware DPG decode wptr update bug for vcn2.5 beforehand. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-21drm/amdgpu/jpeg2.5: Remove JPEG_ENC_MASK from clock ungatingJames Zhu1-1/+0
Remove JPEG_ENC_MASK from clock ungating since MJPEG encoder hasn't been support yet. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-21drm/amd/display: Add DC Debug mask to disable features for bringupHarry Wentland2-0/+9
[Why] At bringup we want to be able to disable various power features. [How] These features are already exposed as dc_debug_options and exercised on other OSes. Create a new dc_debug_mask module parameter and expose relevant bits, in particular * DC_DISABLE_PIPE_SPLIT * DC_DISABLE_STUTTER * DC_DISABLE_DSC * DC_DISABLE_CLOCK_GATING Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-21drm/amdgpu: cleanup unnecessary virt sriov check in amdgpu attributeKevin Wang1-105/+0
the amdgpu device attribute node will be created accordding to sriov vf mode at runtime. cleanup unnecessary sriov check in attribute operation function. Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-18drm/amdgpu: Add a UAPI flag for user to call mem_syncAndrey Grodzovsky2-1/+5
When this flag is set in the CS IB flags, it causes a memory cache flush of the GFX. v2: Move new flag to drm_amdgpu_cs_chunk_ib.flags Bump up UAPI version Remove condition on job != null to emit mem_sync Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-18drm/amdgpu: apply AMDGPU_IB_FLAG_EMIT_MEM_SYNC to compute IBs too (v3)Marek Olšák7-7/+46
Compute IBs need this too. v2: split out version bump v3: squash in emit frame count fixes Signed-off-by: Marek Olšák <marek.olsak@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-18drm/amdgpu: Add mem_sync implementation for all the ASICs.Andrey Grodzovsky5-5/+94
Implement the .mem_sync hook defined earlier. v2: Rename functions Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-18drm/amdgpu: Add new ring callback to insert memory syncAndrey Grodzovsky1-0/+1
Used to flush and invalidate various caches. v2: Rename function hook Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-18drm/amdgpu: optimize amdgpu device attribute codeKevin Wang2-278/+262
unified amdgpu device attribute node functions: 1. add some helper functions to create amdgpu device attribute node. 2. create device node according to device attr flags on different VF mode. 3. rename some functions name to adapt a new interface. v2: 1. remove ATTR_STATE_DEAD, ATTR_STATE_ALIVE enum. 2. rename callback function perform to attr_update. 3. modify some variable names Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-18drm/amdgpu: add amdgpu_virt_get_vf_mode helper functionKevin Wang2-0/+24
the swsmu or powerplay(hwmgr) need to handle task according to different VF mode, this function to help query vf mode. vf mode: 1. SRIOV_VF_MODE_BARE_METAL: the driver work on host OS (PF) 2. SRIOV_VF_MODE_ONE_VF : the driver work on guest OS with one VF 3. SRIOV_VF_MODE_MULTI_VF : the driver work on guest OS with multi VF Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-18drm/amdgpu: Add autodump debugfs node for gpu reset v8Jiange Zhao4-1/+87
When GPU got timeout, it would notify an interested part of an opportunity to dump info before actual GPU reset. A usermode app would open 'autodump' node under debugfs system and poll() for readable/writable. When a GPU reset is due, amdgpu would notify usermode app through wait_queue_head and give it 10 minutes to dump info. After usermode app has done its work, this 'autodump' node is closed. On node closure, amdgpu gets to know the dump is done through the completion that is triggered in release(). There is no write or read callback because necessary info can be obtained through dmesg and umr. Messages back and forth between usermode app and amdgpu are unnecessary. v2: (1) changed 'registered' to 'app_listening' (2) add a mutex in open() to prevent race condition v3 (chk): grab the reset lock to avoid race in autodump_open, rename debugfs file to amdgpu_autodump, provide autodump_read as well, style and code cleanups v4: add 'bool app_listening' to differentiate situations, so that the node can be reopened; also, there is no need to wait for completion when no app is waiting for a dump. v5: change 'bool app_listening' to 'enum amdgpu_autodump_state' add 'app_state_mutex' for race conditions: (1)Only 1 user can open this file node (2)wait_dump() can only take effect after poll() executed. (3)eliminated the race condition between release() and wait_dump() v6: removed 'enum amdgpu_autodump_state' and 'app_state_mutex' removed state checking in amdgpu_debugfs_wait_dump Improve on top of version 3 so that the node can be reopened. v7: move reinit_completion into open() so that only one user can open it. v8: remove complete_all() from amdgpu_debugfs_wait_dump(). Signed-off-by: Jiange Zhao <Jiange.Zhao@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-03-21 02:32:59 +0000