summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c
AgeCommit message (Collapse)AuthorFilesLines
2022-10-18Revert "drm/amdgpu: add debugfs amdgpu_reset_level"Victor Zhao1-3/+0
This reverts commit 5bd8d53f6fa53eab5433698d1362dae2aa53c1cc. This commit breaks the reset logic for aldebaran, revert it for now. Will move the mask inside the reset handler. Fixes: 5bd8d53f6fa53e ("drm/amdgpu: add debugfs amdgpu_reset_level") Signed-off-by: Victor Zhao <Victor.Zhao@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amdgpu: add debugfs amdgpu_reset_levelVictor Zhao1-0/+3
Introduce amdgpu_reset_level debugfs in order to help debug and test specific type of reset. Also helps blocking unwanted type of resets. By default, mode2 reset will not be enabled v2: make this debugfs in adev and use debugfs_create_u32 Signed-off-by: Victor Zhao <Victor.Zhao@amd.com> Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-08drm/amd/amdgpu: Fix alignment issueArunpravin Paneer Selvam1-2/+2
Fix alignment problems reported by zuul for the commit b07d1d73b09e ("drm/amd/amdgpu: Enable high priority gfx queue") Fixes: b07d1d73b09e ("drm/amd/amdgpu: Enable high priority gfx queue") Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-06drm/amd/amdgpu: Enable high priority gfx queueArunpravin Paneer Selvam1-6/+6
Starting from SIENNA CICHLID asic supports two gfx pipes, enabling two graphics queues, 1 on each pipe, pipe0 queue0 would be the normal piority queue and pipe1 queue0 would be the high priority queue Only one queue per pipe is visble to SPI, SPI looks at the priority value assigned to CP_GFX_HQD_QUEUE_PRIORITY from each of the queue's HQD/MQD. Create contexts applying AMDGPU_CTX_PRIORITY_HIGH which submits job to the high priority queue on GFX pipe1. There would be starvation of LP workload if HP workload is always available. v2: - remove unnecessary check(Nirmoy) - make pipe1 hardware support a separate patch(Nirmoy) - remove duplicate code(Shashank) - add CSA support for second gfx pipe(Alex) v3(Christian): - fix incorrect indentation - merge COMPUTE and GFX switch cases as both calls the same function. v4: - rebase w/ latest code base Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-04drm/amdgpu: initialize/finalize the ring for mes queueJack Xiao1-41/+104
Iniailize/finalize the ring for mes queue which submits the command stream to the mes-managed hardware queue. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-04drm/amdgpu: add helper function to initialize mqd from ring v4Jack Xiao1-0/+48
Add the helper function to initialize mqd from ring configuration. v2: use if/else pair instead of ?/: pair v3: use simpler way to judge hqd_active v4: fix parameters to amdgpu_gfx_is_high_priority_compute_queue Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-04drm/amdgpu: initialize the vmid_wait with the stub fenceChristian König1-0/+1
This way we don't need to check for NULL any more. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-09drm/amdgpu: Move scheduler init to after XGMI is readyAndrey Grodzovsky1-2/+3
Before we initialize schedulers we must know which reset domain are we in - for single device there iis a single domain per device and so single wq per device. For XGMI the reset domain spans the entire XGMI hive and so the reset wq is per hive. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://www.spinics.net/lists/amd-gfx/msg74112.html
2021-09-14drm/amdgpu: cleanup debugfs for amdgpu ringsNirmoy Das1-12/+6
Use debugfs_create_file_size API for creating ring debugfs, and as its a NULL returning API, change the return type for amdgpu_debugfs_ring_init API as well. Also cleanup surrounding code. Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Shashank Sharma <shashank.sharma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amdgpu: use IS_ERR for debugfs APIsNirmoy Das1-2/+2
debugfs APIs returns encoded error so use IS_ERR for checking return value. v2: return PTR_ERR(ent) References: https://gitlab.freedesktop.org/drm/amd/-/issues/1686 Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-By: Shashank Sharma <shashank.sharma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-20drm/amd/amdgpu/amdgpu_ring: Provide description for 'sched_score'Lee Jones1-0/+1
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c:169: warning: Function parameter or member 'sched_score' not described in 'amdgpu_ring_init' Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amdgpu: add the sched_score to amdgpu_ring_initChristian König1-2/+4
Allow separate ring to share the same scheduler score. No functional change. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-and-Tested-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-09drm/amdgpu: cleanup struct amdgpu_ringNirmoy Das1-6/+2
This patch consist of below related changes: 1 Rename ring->priority to ring->hw_prio. 2 Assign correct hardware ring priority. 3 Remove ring->priority_mutex as ring priority remains unchanged after initialization. 4 Remove unused ring->num_jobs. v3: remove ring->num_jobs. v2: remove ring->priority_mutex. Fixes: 33abcb1f5a17 ("drm/amdgpu: set compute queue priority at mqd_init") Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-13drm/amd/amdgpu/amdgpu_ring: Fix misnaming of param 'max_dw'Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c:168: warning: Function parameter or member 'max_dw' not described in 'amdgpu_ring_init' drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c:168: warning: Excess function parameter 'max_ndw' description in 'amdgpu_ring_init' Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-13drm/amd/amdgpu/amdgpu_ring: Fix a bunch of function misdocumentationLee Jones1-6/+6
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c:63: warning: Excess function parameter 'adev' description in 'amdgpu_ring_alloc' drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c:122: warning: Excess function parameter 'adev' description in 'amdgpu_ring_commit' drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c:167: warning: Function parameter or member 'max_dw' not described in 'amdgpu_ring_init' drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c:167: warning: Function parameter or member 'irq_src' not described in 'amdgpu_ring_init' drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c:167: warning: Function parameter or member 'irq_type' not described in 'amdgpu_ring_init' drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c:167: warning: Function parameter or member 'hw_prio' not described in 'amdgpu_ring_init' drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c:167: warning: Excess function parameter 'max_ndw' description in 'amdgpu_ring_init' drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c:167: warning: Excess function parameter 'nop' description in 'amdgpu_ring_init' drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c:285: warning: Excess function parameter 'adev' description in 'amdgpu_ring_fini' drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c:325: warning: Function parameter or member 'ring' not described in 'amdgpu_ring_emit_reg_write_reg_wait_helper' drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c:325: warning: Excess function parameter 'adev' description in 'amdgpu_ring_emit_reg_write_reg_wait_helper' Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-02drm/amdgpu/amdgpu: use "*" adjacent to data nameDeepak R Varma1-1/+1
When declaring pointer data, the "*" symbol should be used adjacent to the data name as per the coding standards. This resolves following issues reported by checkpatch script: ERROR: "foo * bar" should be "foo *bar" ERROR: "foo * bar" should be "foo *bar" ERROR: "foo* bar" should be "foo *bar" ERROR: "(foo*)" should be "(foo *)" Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-24drm/amdgpu: Get DRM dev from adev by inline-fLuben Tuikov1-1/+1
Add a static inline adev_to_drm() to obtain the DRM device pointer from an amdgpu_device pointer. Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-18drm/scheduler: Scheduler priority fixes (v2)Luben Tuikov1-1/+1
Remove DRM_SCHED_PRIORITY_LOW, as it was used in only one place. Rename and separate by a line DRM_SCHED_PRIORITY_MAX to DRM_SCHED_PRIORITY_COUNT as it represents a (total) count of said priorities and it is used as such in loops throughout the code. (0-based indexing is the the count number.) Remove redundant word HIGH in priority names, and rename *KERNEL* to *HIGH*, as it really means that, high. v2: Add back KERNEL and remove SW and HW, in lieu of a single HIGH between NORMAL and KERNEL. Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-13drm/amdgpu/ring: simplify scheduler setup logicAlex Deucher1-3/+1
Set up a GPU scheduler based on the ring flag rather than the ring type. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-13drm/amdgpu/ring: add no_scheduler flagAlex Deucher1-1/+2
This allows IPs to flag whether a specific ring requires a GPU scheduler or not. E.g., sometimes instances of an IP are asymmetric and have different capabilities. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-09drm/amdgpu: rework sched_list generationNirmoy Das1-2/+12
Generate HW IP's sched_list in amdgpu_ring_init() instead of amdgpu_ctx.c. This makes amdgpu_ctx_init_compute_sched(), ring.has_high_prio and amdgpu_ctx_init_sched() unnecessary. This patch also stores sched_list for all HW IPs in one big array in struct amdgpu_device which makes amdgpu_ctx_init_entity() much more leaner. v2: fix a coding style issue do not use drm hw_ip const to populate amdgpu_ring_type enum v3: remove ctx reference and move sched array and num_sched to a struct use num_scheds to detect uninitialized scheduler list v4: use array_index_nospec for user space controlled variables fix possible checkpatch.pl warnings Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-09drm/amdgpu: remove unused functionsNirmoy Das1-70/+0
AMDGPU statically sets priority for compute queues at initialization so remove all the functions responsible for changing compute queue priority dynamically. Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-28drm/amdgpu: no need to clean debugfs at amdgpuYintian Tao1-7/+0
drm_minor_unregister will invoke drm_debugfs_cleanup to clean all the child node under primary minor node. We don't need to invoke amdgpu_debugfs_fini and amdgpu_debugfs_regs_cleanup to clean agian. Otherwise, it will raise the NULL pointer like below. [ 45.046029] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8 [ 45.047256] PGD 0 P4D 0 [ 45.047713] Oops: 0002 [#1] SMP PTI [ 45.048198] CPU: 0 PID: 2796 Comm: modprobe Tainted: G W OE 4.18.0-15-generic #16~18.04.1-Ubuntu [ 45.049538] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 45.050651] RIP: 0010:down_write+0x1f/0x40 [ 45.051194] Code: 90 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb e8 ce d9 ff ff 48 ba 01 00 00 00 ff ff ff ff 48 89 d8 <f0> 48 0f c1 10 85 d2 74 05 e8 53 1c ff ff 65 48 8b 04 25 00 5c 01 [ 45.053702] RSP: 0018:ffffad8f4133fd40 EFLAGS: 00010246 [ 45.054384] RAX: 00000000000000a8 RBX: 00000000000000a8 RCX: ffffa011327dd814 [ 45.055349] RDX: ffffffff00000001 RSI: 0000000000000001 RDI: 00000000000000a8 [ 45.056346] RBP: ffffad8f4133fd48 R08: 0000000000000000 R09: ffffffffc0690a00 [ 45.057326] R10: ffffad8f4133fd58 R11: 0000000000000001 R12: ffffa0113cff0300 [ 45.058266] R13: ffffa0113c0a0000 R14: ffffffffc0c02a10 R15: ffffa0113e5c7860 [ 45.059221] FS: 00007f60d46f9540(0000) GS:ffffa0113fc00000(0000) knlGS:0000000000000000 [ 45.060809] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 45.061826] CR2: 00000000000000a8 CR3: 0000000136250004 CR4: 00000000003606f0 [ 45.062913] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 45.064404] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 45.065897] Call Trace: [ 45.066426] debugfs_remove+0x36/0xa0 [ 45.067131] amdgpu_debugfs_ring_fini+0x15/0x20 [amdgpu] [ 45.068019] amdgpu_debugfs_fini+0x2c/0x50 [amdgpu] [ 45.068756] amdgpu_pci_remove+0x49/0x70 [amdgpu] [ 45.069439] pci_device_remove+0x3e/0xc0 [ 45.070037] device_release_driver_internal+0x18a/0x260 [ 45.070842] driver_detach+0x3f/0x80 [ 45.071325] bus_remove_driver+0x59/0xd0 [ 45.071850] driver_unregister+0x2c/0x40 [ 45.072377] pci_unregister_driver+0x22/0xa0 [ 45.073043] amdgpu_exit+0x15/0x57c [amdgpu] [ 45.073683] __x64_sys_delete_module+0x146/0x280 [ 45.074369] do_syscall_64+0x5a/0x120 [ 45.074916] entry_SYSCALL_64_after_hwframe+0x44/0xa9 v2: remove all debugfs cleanup/fini code at amdgpu v3: squash in unused variable removal Signed-off-by: Yintian Tao <yttao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-26drm/amdgpu/ring: move debugfs init into core amdgpu debugfsAlex Deucher1-12/+3
In order to remove the load and unload drm callbacks, we need to reorder the init sequence to move all the drm debugfs file handling. Do this for rings. Tested-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-26drm/amdgpu: cleanup amdgpu_ring_finiNirmoy Das1-1/+2
cleanup amdgpu_ring_fini to check the prerequisites before changing ring->sched.ready Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-25Merge branch 'drm-next' into drm-next-5.3Alex Deucher1-1/+2
Backmerge drm-next and fix up conflicts due to drmP.h removal. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amdgpu: add the trailing fence per ringJack Xiao1-0/+10
The trailing fence for ring is used to track the completion of preemption. Acked-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-11drm/amdgpu: drop the incorrect soft_reset for SRIOVMonk Liu1-1/+1
It's incorrect to do soft reset for SRIOV, when GFX hang the WREG would stuck there becuase it goes KIQ way. the GPU reset counter is incorrect: always increase twice for each timedout Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-10drm/amd: drop use of drmP.h in amdgpu/amdgpu*Sam Ravnborg1-1/+2
Drop use of drmP.h in all files named amdgpu* in drm/amd/amdgpu/ Fix fallout. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-10-sam@ravnborg.org
2019-03-20drm/amdgpu: use more entries for the first paging queueChristian König1-0/+2
To aid recoverable page faults. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-07drm/amdgpu: Skip ring soft recovery when fence was NULLwentalou1-1/+1
amdgpu_ring_soft_recovery would have Call-Trace, when s_fence->parent was NULL inside amdgpu_job_timedout. Check fence first, as drm_sched_hw_job_reset did. Signed-off-by: Wentao Lou <Wentao.Lou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amdgpu: further ring test cleanupsChristian König1-1/+7
Move all error messages from IP specific code into the common helper. This way we now uses the ring name in the messages instead of the index and note which device is affected as well. Also cleanup error handling in the IP specific code and consequently use ETIMEDOUT when the ring test timed out. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amdgpu: Retire amdgpu_ring.ready flag v4Andrey Grodzovsky1-1/+21
Start using drm_gpu_scheduler.ready isntead. v3: Add helper function to run ring test and set sched.ready flag status accordingly, clean explicit sched.ready sets from the IP specific files. v4: Add kerneldoc and rebase. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amdgpu: add ring soft recovery v4Christian König1-0/+25
Instead of hammering hard on the GPU try a soft recovery first. v2: reorder code a bit v3: increase timeout to 10ms, increment GPU reset counter v4: squash in compile fix (Christian) Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com>
2018-08-27drm/amdgpu: remove ring lru handlingChristian König1-98/+0
Not needed any more. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-18drm/amdgpu: allow for more flexible priority handlingChristian König1-1/+2
Allow to call amdgpu_ring_priority_get() after pushing the ring to the scheduler. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-06-15drm/amdgpu: define and add extra dword for jpeg ringBoyuan Zhang1-1/+1
Define extra dword for jpeg ring. Jpeg ring will allocate extra dword to store the patch commands for fixing the known issue. v2: dropping extra_dw for rings other than jpeg. Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-18drm/amdgpu/vg20:Restruct uvd.inst to support multiple instancesJames Zhu1-0/+1
Vega20 has dual-UVD. Need add multiple instances support for uvd. Restruct uvd.inst, using uvd.inst[0] to replace uvd.inst->. Repurpose amdgpu_ring::me for instance index, and initialize to 0. There are no any logical changes here. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-15drm/amdgpu: add emit_reg_write_reg_wait ring callbackAlex Deucher1-0/+20
This callback writes a value to a register and then reads back another register and waits for a value in a single operation. Provide a helper function using two operations for engines that don't support this opertion. Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-01drm/amd/amdgpu: Mask rptr as well in ring debugfsTom St Denis1-1/+1
The read/write pointers on sdma4 devices increment beyond the ring size and should be masked. Tested on my Ryzen 2400G. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amdgpu: cache the fence to wait for a VMIDChristian König1-0/+3
Beneficial when a lot of processes are waiting for VMIDs. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-18drm/amdgpu: rename amdgpu_wb_* functionsAlex Deucher1-8/+8
add device for consistency. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-07drm: move amd_gpu_scheduler into common locationLucas Stach1-7/+7
This moves and renames the AMDGPU scheduler to a common location in DRM in order to facilitate re-use by other drivers. This is mostly a straight forward rename with no code changes. One notable exception is the function to_drm_sched_fence(), which is no longer a inline header function to avoid the need to export the drm_sched_fence_ops_scheduled and drm_sched_fence_ops_finished structures. Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-08drm/amdgpu: bypass lru touch for KIQ ring submissionPixel Ding1-1/+2
KIQ ring submission is used for register accessing on SRIOV VF that could happen both in irq enabled and irq disabled cases. Inversion lock could happen on adev->ring_lru_list_lock, while this operation is useless and just adds overhead in this use case. Signed-off-by: Pixel Ding <Pixel.Ding@amd.com> Reviewed-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-10-09drm/amdgpu: add framework for HW specific priority settings v9Andres Rodriguez1-1/+75
Add an initial framework for changing the HW priorities of rings. The framework allows requesting priority changes for the lifetime of an amdgpu_job. After the job completes the priority will decay to the next lowest priority for which a request is still valid. A new ring function set_priority() can now be populated to take care of the HW specific programming sequence for priority changes. v2: set priority before emitting IB, and take a ref on amdgpu_job v3: use AMD_SCHED_PRIORITY_* instead of AMDGPU_CTX_PRIORITY_* v4: plug amdgpu_ring_restore_priority_cb into amdgpu_job_free_cb v5: use atomic for tracking job priorities instead of last_job v6: rename amdgpu_ring_priority_[get/put]() and align parameters v7: replace spinlocks with mutexes for KIQ compatibility v8: raise ring priority during cs_ioctl, instead of job_run v9: priority_get() before push_job() Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Andres Rodriguez <andresx7@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-28drm/amdgpu: map compute rings by least recently used pipeAndres Rodriguez1-5/+20
This patch provides a guarantee that the first n queues allocated by an application will be on different pipes. Where n is the number of pipes available from the hardware. This helps avoid ring aliasing which can result in work executing in time-sliced mode instead of truly parallel mode. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Andres Rodriguez <andresx7@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-08-29drm/amdgpu: set sched_hw_submission higher for KIQ (v3)Alex Deucher1-4/+12
KIQ doesn't really use the GPU scheduler. The base drivers generally use the KIQ ring directly rather than submitting IBs. However, amdgpu_sched_hw_submission (which defaults to 2) limits the number of outstanding fences to 2. KFD uses the KIQ for TLB flushes and the 2 fence limit hurts performance when there are several KFD processes running. v2: move some expressions to one line change KIQ sched_hw_submission to at least 16 v3: bump to 256 Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-08-15drm/amdgpu: don't finish the ring if not initializedTrigger Huang1-0/+4
If a ring is not initialized, it also should not be finished. For example, in Vega10's SR-IOV environment, UVD's decode ring is not initialized, but will be finnished in amdgpu_uvd_sw_fini, because UVD driver put all the uvd decode ring's finish operation into amdgpu_uvd_sw_fini function, while not uvd_vXXX_0_sw_fini. This will lead to amdgpu module unloading failure. Signed-off-by: Trigger Huang <trigger.huang@amd.com> Reviewed-by: Monk Liu <monk.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-08-15drm/amdgpu: use 256 bit buffers for all wb allocations (v2)Alex Deucher1-49/+16
May waste a bit of memory, but simplifies the interface significantly. v2: convert internal accounting to use 256bit slots Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-08-15drm/amdgpu: make wb 256bit function names consistentAlex Deucher1-1/+1
Use a lower case b to be consistent with the other wb functions. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-03-31 14:18:57 +0000