summaryrefslogtreecommitdiffstats
path: root/drivers/gpio
AgeCommit message (Collapse)AuthorFilesLines
2019-07-17Merge tag 'gpio-v5.3-2' of ↵Linus Torvalds3-28/+20
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: - Revert a SPIO GPIO fix that didn't fix anything but instead created new problems. - Remove the EM GPIO irqdomain in a safe manner. - Fix a memory leak in the gpio quirks. - Make the DaVinci error path silent on probe deferral. * tag 'gpio-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: Revert "gpio/spi: Fix spi-gpio regression on active high CS" gpio: em: remove the gpiochip before removing the irq domain gpiolib: of: fix a memory leak in of_gpio_flags_quirks() gpio: davinci: silence error prints in case of EPROBE_DEFER
2019-07-16Merge tag 'docs/v5.3-1' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull rst conversion of docs from Mauro Carvalho Chehab: "As agreed with Jon, I'm sending this big series directly to you, c/c him, as this series required a special care, in order to avoid conflicts with other trees" * tag 'docs/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (77 commits) docs: kbuild: fix build with pdf and fix some minor issues docs: block: fix pdf output docs: arm: fix a breakage with pdf output docs: don't use nested tables docs: gpio: add sysfs interface to the admin-guide docs: locking: add it to the main index docs: add some directories to the main documentation index docs: add SPDX tags to new index files docs: add a memory-devices subdir to driver-api docs: phy: place documentation under driver-api docs: serial: move it to the driver-api docs: driver-api: add remaining converted dirs to it docs: driver-api: add xilinx driver API documentation docs: driver-api: add a series of orphaned documents docs: admin-guide: add a series of orphaned documents docs: cgroup-v1: add it to the admin-guide book docs: aoe: add it to the driver-api book docs: add some documentation dirs to the driver-api book docs: driver-model: move it to the driver-api book docs: lp855x-driver.rst: add it to the driver-api book ...
2019-07-16Merge tag 'gpio-v5.3-rc1-fixes-for-linus' of ↵Linus Walleij3-20/+19
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes GPIO fixes for v5.3-rc1 - silence error messages on probe deferral in gpio-davinci - fix a memory leak in gpiolib-of - fix a potential use-after-free error in gpio-em
2019-07-16Revert "gpio/spi: Fix spi-gpio regression on active high CS"Linus Walleij1-8/+1
This reverts commit fbbf145a0e0a0177e089c52275fbfa55763e7d1d. It seems I was misguided in my fixup, which was working at the time but did not work on the final v5.2. The patch tried to avoid a quirk the gpiolib code not to treat "spi-gpio" CS gpios "special" by enforcing them to be active low, in the belief that since the "spi-gpio" driver was parsing the device tree on its own, it did not care to inspect the "spi-cs-high" attribute on the device nodes. That's wrong. The SPI core was inspecting them inside the of_spi_parse_dt() funtion and setting SPI_CS_HIGH on the nodes, and the driver inspected this flag when driving the line. As of now, the core handles the GPIO and it will consistently set the GPIO descriptor to 1 to enable CS, strictly requireing the gpiolib to invert it. And the gpiolib should indeed enforce active low on the CS line. Device trees should of course put the right flag on the GPIO handles, but it used to not matter. If we don't enforce active low on "gpio-gpio" we may run into ABI backward compatibility issues, so revert this. Cc: linux-spi@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20190715204529.9539-1-linus.walleij@linaro.org
2019-07-15Merge branch 'i2c/for-5.3' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "New stuff from the I2C world: - in the core, getting irqs from ACPI is now similar to OF - new driver for MediaTek MT7621/7628/7688 SoCs - bcm2835, i801, and tegra drivers got some more attention - GPIO API cleanups - cleanups in the core headers - lots of usual driver updates" * 'i2c/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (74 commits) i2c: mt7621: Fix platform_no_drv_owner.cocci warnings i2c: cpm: remove casting dma_alloc dt-bindings: i2c: sun6i-p2wi: Fix the binding example dt-bindings: i2c: mv64xxx: Fix the example compatible i2c: i801: Documentation update i2c: i801: Add support for Intel Tiger Lake i2c: i801: Fix PCI ID sorting dt-bindings: i2c-stm32: document optional dmas i2c: i2c-stm32f7: Add I2C_SMBUS_I2C_BLOCK_DATA support i2c: core: Tidy up handling of init_irq i2c: core: Move ACPI gpio IRQ handling into i2c_acpi_get_irq i2c: core: Move ACPI IRQ handling to probe time i2c: acpi: Factor out getting the IRQ from ACPI i2c: acpi: Use available IRQ helper functions i2c: core: Allow whole core to use i2c_dev_irq_from_resources eeprom: at24: modify a comment referring to platform data dt-bindings: i2c: omap: Add new compatible for J721E SoCs dt-bindings: i2c: mv64xxx: Add YAML schemas dt-bindings: i2c: sun6i-p2wi: Add YAML schemas i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver ...
2019-07-15Merge tag 'mfd-next-5.3' of ↵Linus Torvalds3-0/+244
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Frameworks: - Set 'struct device' fwnode when registering a new device New Drivers: - Add support for ROHM BD70528 PMIC New Device Support: - Add support for LP87561 4-Phase Regulator to TI LP87565 PMIC - Add support for RK809 and RK817 to Rockchip RK808 - Add support for Lid Angle to ChromeOS core - Add support for CS47L15 CODEC to Madera core - Add support for CS47L92 CODEC to Madera core - Add support for ChromeOS (legacy) Accelerometers in ChromeOS core - Add support for Add Intel Elkhart Lake PCH to Intel LPSS New Functionality: - Provide regulator supply information when registering; madera-core - Additional Device Tree support; lp87565, madera, cros-ec, rohm,bd71837-pmic - Allow over-riding power button press via Device Tree; rohm-bd718x7 - Differentiate between running processors; cros_ec_dev Fix-ups: - Big header file update; cros_ec_commands.h - Split header per-subsystem; rohm-bd718x7 - Remove superfluous code; menelaus, cs5535-mfd, cs47lXX-tables - Trivial; sorting, coding style; intel-lpss-pci - Only remove Power Off functionality if set locally; rk808 - Make use for Power Off Prepare(); rk808 - Fix spelling mistake in header guards; stmfx - Properly free IDA resources - SPDX fixups; cs47lXX-tables, madera - Error path fixups; hi655x-pmic Bug Fixes: - Add missing break in case() statement - Repair undefined behaviour when not initialising variables; arizona-core, madera-core - Fix reference to Device Tree documentation; madera" * tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits) mfd: hi655x-pmic: Fix missing return value check for devm_regmap_init_mmio_clk mfd: madera: Fixup SPDX headers mfd: madera: Remove some unused registers and fix some defaults mfd: intel-lpss: Release IDA resources mfd: intel-lpss: Add Intel Elkhart Lake PCH PCI IDs mfd: cs5535-mfd: Remove ifdef OLPC noise mfd: stmfx: Fix macro definition spelling dt-bindings: mfd: Add link to ROHM BD71847 Datasheet MAINAINERS: Swap words in INTEL PMIC MULTIFUNCTION DEVICE DRIVERS mfd: cros_ec_dev: Register cros_ec_accel_legacy driver as a subdevice mfd: rk808: Prepare rk805 for poweroff mfd: rk808: Check pm_power_off pointer mfd: cros_ec: differentiate SCP from EC by feature bit dt-bindings: Add binding for cros-ec-rpmsg mfd: madera: Add Madera core support for CS47L92 mfd: madera: Add Madera core support for CS47L15 mfd: madera: Update DT bindings to add additional CODECs mfd: madera: Add supply mapping for MICVDD mfd: madera: Fix potential uninitialised use of variable mfd: madera: Fix bad reference to pinctrl.txt file ...
2019-07-15docs: driver-api: add a series of orphaned documentsMauro Carvalho Chehab1-1/+1
There are lots of documents under Documentation/*.txt and a few other orphan documents elsehwere that belong to the driver-API book. Move them to their right place. Reviewed-by: Cornelia Huck <cohuck@redhat.com> # vfio-related parts Acked-by: Logan Gunthorpe <logang@deltatee.com> # switchtec Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15docs: driver-model: move it to the driver-api bookMauro Carvalho Chehab1-1/+1
The audience for the Kernel driver-model is clearly Kernel hackers. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> # ice driver changes
2019-07-15gpio: em: remove the gpiochip before removing the irq domainBartosz Golaszewski1-18/+15
In commit 8764c4ca5049 ("gpio: em: use the managed version of gpiochip_add_data()") we implicitly altered the ordering of resource freeing: since gpiochip_remove() calls gpiochip_irqchip_remove() internally, we now can potentially use the irq_domain after it was destroyed in the remove() callback (as devm resources are freed after remove() has returned). Use devm_add_action_or_reset() to keep the ordering right and entirely kill the remove() callback in the driver. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: 8764c4ca5049 ("gpio: em: use the managed version of gpiochip_add_data()") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-07-15gpiolib: of: fix a memory leak in of_gpio_flags_quirks()Nishka Dasgupta1-0/+1
Each iteration of for_each_child_of_node puts the previous node, but in the case of a break from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the break. Issue found with Coccinelle. Cc: <stable@vger.kernel.org> Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> [Bartosz: tweaked the commit message] Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-15gpio: davinci: silence error prints in case of EPROBE_DEFERKeerthy1-2/+3
Silence error prints in case of EPROBE_DEFER. This avoids multiple/duplicate defer prints during boot. Cc: <stable@vger.kernel.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-12Merge tag 'driver-core-5.3-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and debugfs updates from Greg KH: "Here is the "big" driver core and debugfs changes for 5.3-rc1 It's a lot of different patches, all across the tree due to some api changes and lots of debugfs cleanups. Other than the debugfs cleanups, in this set of changes we have: - bus iteration function cleanups - scripts/get_abi.pl tool to display and parse Documentation/ABI entries in a simple way - cleanups to Documenatation/ABI/ entries to make them parse easier due to typos and other minor things - default_attrs use for some ktype users - driver model documentation file conversions to .rst - compressed firmware file loading - deferred probe fixes All of these have been in linux-next for a while, with a bunch of merge issues that Stephen has been patient with me for" * tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits) debugfs: make error message a bit more verbose orangefs: fix build warning from debugfs cleanup patch ubifs: fix build warning after debugfs cleanup patch driver: core: Allow subsystems to continue deferring probe drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT arch_topology: Remove error messages on out-of-memory conditions lib: notifier-error-inject: no need to check return value of debugfs_create functions swiotlb: no need to check return value of debugfs_create functions ceph: no need to check return value of debugfs_create functions sunrpc: no need to check return value of debugfs_create functions ubifs: no need to check return value of debugfs_create functions orangefs: no need to check return value of debugfs_create functions nfsd: no need to check return value of debugfs_create functions lib: 842: no need to check return value of debugfs_create functions debugfs: provide pr_fmt() macro debugfs: log errors when something goes wrong drivers: s390/cio: Fix compilation warning about const qualifiers drivers: Add generic helper to match by of_node driver_find_device: Unify the match function with class_find_device() bus_find_device: Unify the match callback with class_find_device ...
2019-07-09Merge tag 'regulator-v5.3' of ↵Linus Torvalds1-5/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "A couple of new features in the core, the most interesting one being support for complex regulator coupling configurations initially targeted at nVidia Tegra SoCs, and some new drivers but otherwise quite a quiet release. Summary: - Core support for gradual ramping of voltages for devices that can't manage large changes in hardware from Bartosz Golaszewski. - Core support for systems that have complex coupling requirements best described via code, contributed by Dmitry Osipenko. - New drivers for Dialog SLG51000, Qualcomm PM8005 and ST Microelectronics STM32-Booster" * tag 'regulator-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (52 commits) regulator: max77650: use vsel_step regulator: implement selector stepping regulator: max77650: add MODULE_ALIAS() regulator: max77620: remove redundant assignment to variable ret dt-bindings: regulator: add support for the stm32-booster regulator: add support for the stm32-booster regulator: s2mps11: Adjust supported buck voltages to real values regulator: s2mps11: Fix buck7 and buck8 wrong voltages gpio: Fix return value mismatch of function gpiod_get_from_of_node() regulator: core: Expose some of core functions needed by couplers regulator: core: Introduce API for regulators coupling customization regulator: s2mps11: Add support for disabling S2MPS11 regulators in suspend regulator: s2mps11: Reduce number of rdev_get_id() calls regulator: qcom_spmi: Do NULL check for lvs regulator: qcom_spmi: Fix math of spmi_regulator_set_voltage_time_sel regulator: da9061/62: Adjust LDO voltage selection minimum value regulator: s2mps11: Fix ERR_PTR dereference on GPIO lookup failure regulator: qcom_spmi: add PMS405 SPMI regulator dt-bindings: qcom_spmi: Document pms405 support arm64: dts: msm8998-mtp: Add pm8005_s1 regulator ...
2019-07-09Merge tag 'gpio-v5.3-1' of ↵Linus Torvalds33-902/+693
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the big slew of GPIO changes for the v5.3 kernel cycle. This is mostly incremental work this time. Three important things: - The FMC subsystem is deleted through my tree. This happens through GPIO as its demise was discussed in relation to a patch decoupling its GPIO implementation from the standard way of handling GPIO. As it turns out, that is not the only subsystem it reimplements and the authors think it is better do scratch it and start over using the proper kernel subsystems than try to polish the rust shiny. See the commit (ACKed by the maintainers) for details. - Arnd made a small devres patch that was ACKed by Greg and goes into the device core. - SPDX header change colissions may happen, because at times I've seen that quite a lot changed during the -rc:s in regards to SPDX. (It is good stuff, tglx has me convinced, and it is worth the occasional pain.) Apart from this is is nothing controversial or problematic. Summary: Core: - When a gpio_chip request GPIOs from itself, it can now fully control the line characteristics, both machine and consumer flags. This makes a lot of sense, but took some time before I figured out that this is how it has to work. - Several smallish documentation fixes. New drivers: - The PCA953x driver now supports the TI TCA9539. - The DaVinci driver now supports the K3 AM654 SoCs. Driver improvements: - Major overhaul and hardening of the OMAP driver by Russell King. - Starting to move some drivers to the new API passing irq_chip along with the gpio_chip when adding the gpio_chip instead of adding it separately. Unrelated: - Delete the FMC subsystem" * tag 'gpio-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits) Revert "gpio: tegra: Clean-up debugfs initialisation" gpiolib: Use spinlock_t instead of struct spinlock gpio: stp-xway: allow compile-testing gpio: stp-xway: get rid of the #include <lantiq_soc.h> dependency gpio: stp-xway: improve module clock error handling gpio: stp-xway: simplify error handling in xway_stp_probe() gpiolib: Clarify use of non-sleeping functions gpiolib: Fix references to gpiod_[gs]et_*value_cansleep() variants gpiolib: Document new gpio_chip.init_valid_mask field Documentation: gpio: Fix reference to gpiod_get_array() gpio: pl061: drop duplicate printing of device name gpio: altera: Pass irqchip when adding gpiochip gpio: siox: Use devm_ managed gpiochip gpio: siox: Add struct device *dev helper variable gpio: siox: Pass irqchip when adding gpiochip drivers: gpio: amd-fch: make resource struct const devres: allow const resource arguments gpio: ath79: Pass irqchip when adding gpiochip gpio: tegra: Clean-up debugfs initialisation gpio: siox: Switch to IRQ_TYPE_NONE ...
2019-07-08Merge branch 'irq-core-for-linus' of ↵Linus Torvalds1-7/+44
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The irq departement provides the usual mixed bag: Core: - Further improvements to the irq timings code which aims to predict the next interrupt for power state selection to achieve better latency/power balance - Add interrupt statistics to the core NMI handlers - The usual small fixes and cleanups Drivers: - Support for Renesas RZ/A1, Annapurna Labs FIC, Meson-G12A SoC and Amazon Gravition AMR/GIC interrupt controllers. - Rework of the Renesas INTC controller driver - ACPI support for Socionext SoCs - Enhancements to the CSKY interrupt controller - The usual small fixes and cleanups" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits) irq/irqdomain: Fix comment typo genirq: Update irq stats from NMI handlers irqchip/gic-pm: Remove PM_CLK dependency irqchip/al-fic: Introduce Amazon's Annapurna Labs Fabric Interrupt Controller Driver dt-bindings: interrupt-controller: Add Amazon's Annapurna Labs FIC softirq: Use __this_cpu_write() in takeover_tasklets() irqchip/mbigen: Stop printing kernel addresses irqchip/gic: Add dependency for ARM_GIC_MAX_NR genirq/affinity: Remove unused argument from [__]irq_build_affinity_masks() genirq/timings: Add selftest for next event computation genirq/timings: Add selftest for irqs circular buffer genirq/timings: Add selftest for circular array genirq/timings: Encapsulate storing function genirq/timings: Encapsulate timings push genirq/timings: Optimize the period detection speed genirq/timings: Fix timings buffer inspection genirq/timings: Fix next event index function irqchip/qcom: Use struct_size() in devm_kzalloc() irqchip/irq-csky-mpintc: Remove unnecessary loop in interrupt handler dt-bindings: interrupt-controller: Update csky mpintc ...
2019-07-06Revert "gpio: tegra: Clean-up debugfs initialisation"Linus Walleij1-3/+15
This reverts commit a4de43049a1d0e2ed2a1d95e18e74b82cd9ca058. The commit creates build errors. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-06gpiolib: Use spinlock_t instead of struct spinlockSebastian Andrzej Siewior1-1/+1
For spinlocks the type spinlock_t should be used instead of "struct spinlock". Use spinlock_t for spinlock's definition. Cc: linux-gpio@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20190704153803.12739-8-bigeasy@linutronix.de Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-04Merge branch 'regulator-5.3' into regulator-nextMark Brown1-5/+1
2019-07-04gpio: stp-xway: allow compile-testingMartin Blumenstingl1-1/+2
Enable compile-testing of the stp-xway GPIO driver now that it does not depend on any architecture specific includes anymore. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20190702223248.31934-5-martin.blumenstingl@googlemail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-04gpio: stp-xway: get rid of the #include <lantiq_soc.h> dependencyMartin Blumenstingl1-4/+1
Use the xway_stp_{r,w}32 helpers in xway_stp_w32_mask instead of relying on ltq_{r,w}32 from the architecture specific <lantiq_soc.h>. This will allow the driver to be compile-tested on all architectures that support MMIO. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20190702223248.31934-4-martin.blumenstingl@googlemail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-04gpio: stp-xway: improve module clock error handlingMartin Blumenstingl1-3/+8
Three module clock error handling improvements: - use devm_clk_get() so the clock instance can be freed if devm_gpiochip_add_data() fails later on - switch to clk_prepare_enable() so the driver is ready whenever the lantiq target switches to the common clock framework - disable the clock again (using clk_disable_unprepare()) if devm_gpiochip_add_data() All of these are virtually no-ops with the current lantiq target. However, these will be relevant if we switch to the common clock framework. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20190702223248.31934-3-martin.blumenstingl@googlemail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-04gpio: stp-xway: simplify error handling in xway_stp_probe()Martin Blumenstingl1-10/+9
Return early if devm_gpiochip_add_data() returns an error instead of having two consecutive "if (!ret) ..." statements. Also make xway_stp_hw_init() return void because it unconditionally returns 0. While here also update the kerneldoc comment for xway_stp_hw_init(). These changes makes the error handling within the driver consistent. No functional changes intended. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20190702223248.31934-2-martin.blumenstingl@googlemail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-04gpiolib: Clarify use of non-sleeping functionsGeert Uytterhoeven1-8/+8
Obviously functions that are safe to be called from atomic contexts, can be called from non-atomic contexts, too. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20190701142809.25308-1-geert+renesas@glider.be Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-04gpiolib: Fix references to gpiod_[gs]et_*value_cansleep() variantsGeert Uytterhoeven1-3/+4
Commit 372e722ea4dd4ca1 ("gpiolib: use descriptors internally") renamed the functions to use a "gpiod" prefix, and commit 79a9becda8940deb ("gpiolib: export descriptor-based GPIO interface") introduced the "raw" variants, but both changes forgot to update the comments. Readd a similar reference to gpiod_set_value(), which was accidentally removed by commit 1e77fc82110ac36f ("gpio: Add missing open drain/source handling to gpiod_set_value_cansleep()"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20190701142738.25219-1-geert+renesas@glider.be Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-03gpio: pl061: drop duplicate printing of device nameEnrico Weigelt1-1/+1
The dev_info() call already prints the device name, so there's no need to explicitly include it in the message for second time. Signed-off-by: Enrico Weigelt <info@metux.net> Link: https://lore.kernel.org/r/1562146944-4162-1-git-send-email-info@metux.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-03gpio: altera: Pass irqchip when adding gpiochipLinus Walleij1-27/+21
We need to convert all old gpio irqchips to pass the irqchip setup along when adding the gpio_chip. For chained irqchips this is a pretty straight-forward conversion. Cc: Ley Foon Tan <lftan@altera.com> Cc: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-03gpio: siox: Use devm_ managed gpiochipLinus Walleij1-10/+1
By using devm_gpiochip_add_data() we can get rid of the remove() callback. As this driver doesn't use the gpiochip data pointer we simply pass in NULL. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-03gpio: siox: Add struct device *dev helper variableLinus Walleij1-5/+5
This makes the code easier to read. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-03gpio: siox: Pass irqchip when adding gpiochipLinus Walleij1-9/+7
We need to convert all old gpio irqchips to pass the irqchip setup along when adding the gpio_chip. For chained irqchips this is a pretty straight-forward conversion. Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-03drivers: gpio: amd-fch: make resource struct constEnrico Weigelt1-1/+1
The struct resource field is statically initialized and may never change. Therefore make it const. Signed-off-by: Enrico Weigelt <info@metux.net> Link: https://lore.kernel.org/r/1560787211-15443-1-git-send-email-info@metux.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-02gpio/spi: Fix spi-gpio regression on active high CSLinus Walleij1-1/+8
I ran into an intriguing bug caused by commit ""spi: gpio: Don't request CS GPIO in DT use-case" affecting all SPI GPIO devices with an active high chip select line. The commit switches the CS gpio handling over to the GPIO core, which will parse and handle "cs-gpios" from the OF node without even calling down to the driver to get the job done. However the GPIO core handles the standard bindings in Documentation/devicetree/bindings/spi/spi-controller.yaml that specifies that active high CS needs to be specified using "spi-cs-high" in the DT node. The code in drivers/spi/spi-gpio.c never respected this and never tried to inspect subnodes to see if they contained "spi-cs-high" like the gpiolib OF quirks does. Instead the only way to get an active high CS was to tag it in the device tree using the flags cell such as cs-gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; This alters the quirks to not inspect the subnodes of SPI masters on "spi-gpio" for the standard attribute "spi-cs-high", making old device trees work as expected. This semantic is a bit ambigous, but just allowing the flags on the GPIO descriptor to modify polarity is what the kernel at large mostly uses so let's encourage that. Fixes: 249e2632dcd0 ("spi: gpio: Don't request CS GPIO in DT use-case") Cc: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: linux-gpio@vger.kernel.org Cc: linux-spi@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-27gpio: ath79: Pass irqchip when adding gpiochipLinus Walleij1-39/+27
We need to convert all old gpio irqchips to pass the irqchip setup along when adding the gpio_chip. For chained irqchips this is a pretty straight-forward conversion. Take this opportunity to add a local dev pointer and use devm_gpiochip_add() so we can get rid of the remove() callback altogether. Cc: linux-mips@linux-mips.org Acked-by: Alban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-27gpio: tegra: Clean-up debugfs initialisationJon Hunter1-15/+3
The function tegra_gpio_debuginit() just calls debugfs_create_file() and given that there is already a stub function implemented for debugfs_create_file() when CONFIG_DEBUG_FS is not enabled, there is no need for the function tegra_gpio_debuginit() and so remove it. Finally, use a space and not a tab between the #ifdef and CONFIG_DEBUG_FS. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-27Merge tag 'gpio-v5.3-updates-for-linus' of ↵Linus Walleij4-74/+32
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel gpio: updates for v5.3 - add include/linux/gpio.h to .gitignore in /tools - improve and simplify code in the em driver - simplify code in max732x by using devm helpers (including the new devm_i2c_new_dummy_device()) - fix SPDX header for madera - remove checking of return values of debugfs routines in gpio-mockup
2019-06-27gpio: siox: Switch to IRQ_TYPE_NONELinus Walleij1-1/+1
The siox driver is hardcoding a default type of IRQ_TYPE_EDGE_RISING to the irq helper, but this should only be applicable to old boardfiles and odd device tree irqchips with just onecell irq (no flags). I doubt this is the case with the siox, I think all consumers specify the flags they use in the device tree. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-27gpio: siox: Do not call gpiochip_remove() on errorpathLinus Walleij1-5/+2
gpiochip_remove() was called on the errorpath if gpiochip_add() failed: this is wrong, if the chip failed to add it is not there so it should not be removed. Fixes: be8c8facc707 ("gpio: new driver to work with a 8x12 siox") Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-27gpio: pl061: Pass irqchip when adding gpiochipLinus Walleij1-14/+16
We need to convert all old gpio irqchips to pass the irqchip setup along when adding the gpio_chip. For chained irqchips this is a pretty straight-forward conversion. Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-27gpio: tegra: No need to cast away return value of debugfs_create_file()Greg Kroah-Hartman1-2/+2
It is fine to ignore the return value (and encouraged), so no need to cast away the return value, you will not get a build warning at all. Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: linux-gpio@vger.kernel.org Cc: linux-tegra@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-27gpio: No need to cast away return value of debugfs_create_file()Greg Kroah-Hartman1-2/+2
It is fine to ignore the return value (and encouraged), so need to cast away the return value, you will not get a build warning at all. Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-27gpio: Sort GPIO drivers in MakefileGeert Uytterhoeven1-148/+148
Sort the definitions for the individual GPIO drivers in the Makefile by object file name. Align all entries while we're at it. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-27gpio: siox: Use module_siox_driver()Enrico Weigelt1-12/+1
Reduce driver init boilerplate by using the new module_siox_driver() macro. Signed-off-by: Enrico Weigelt <info@metux.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-27gpio: eic-sprd: Use devm_platform_ioremap_resource()Enrico Weigelt, metux IT consult1-7/+2
Use the new helper that wraps the calls to platform_get_resource() and devm_ioremap_resource() together. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-27gpio: vr41xx: Use devm_platform_ioremap_resource()Enrico Weigelt, metux IT consult1-14/+5
Use the new helper that wraps the calls to platform_get_resource() and devm_ioremap_resource() together. this driver deserves a bit more cleanup, to get rid of the global variable giu_base, which makes it single-instance-only. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-27gpio: janz-ttl: Drop unneccessary temp variable devEnrico Weigelt, metux IT consult1-5/+4
don't need the temporary variable "dev", directly use &pdev->dev Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-27gpio: grgpio: Use devm_platform_ioremap_resource()Enrico Weigelt, metux IT consult1-3/+1
Use the new helper that wraps the calls to platform_get_resource() and devm_ioremap_resource() together. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-27gpio: ep93xx: Use devm_platform_ioremap_resource()Enrico Weigelt, metux IT consult1-5/+2
Use the new helper that wraps the calls to platform_get_resource() and devm_ioremap_resource() together. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-27gpio: amdpt: Drop unneeded deref of &pdev->devEnrico Weigelt, metux IT consult1-5/+5
We already have the struct device* pointer in a local variable, so we can write this a bit shorter. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-27gpio: rcar: Pedantic formattingEnrico Weigelt, metux IT consult1-1/+1
A tab sneaked in, where it shouldn't be. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-27gpio: amd: Drop unused pdev pointer in privata dataEnrico Weigelt1-2/+0
The pointer to the struct platform_device in the driver's private data struct is never used and therefore can be dropped. Signed-off-by: Enrico Weigelt <info@metux.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-27gpio: mockup: no need to check return value of debugfs_create functionsGreg Kroah-Hartman1-16/+5
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Bamvor Jian Zhang <bamv2005@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [Bartosz: removed one more check for debugfs return value] Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>