summaryrefslogtreecommitdiffstats
path: root/drivers/gpio
AgeCommit message (Collapse)AuthorFilesLines
2013-05-23Merge tag 'gpio-fixes-v3.10-1' of ↵Linus Torvalds8-21/+64
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: - An OMAP fix that makes ethernet work again. - Fix for build problem when building the MCP23S08 driver as module. - IRQ conflicts in the Langwell driver. - Fix IRQ coherency issues in the MXS driver. - Return correct errorcode on errorpath when removing GPIO chips. * tag 'gpio-fixes-v3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: Don't override the error code in probe error handling gpio: mxs: Use set and clear capabilities of the gpio controller gpio-langwell: fix irq conflicts when DT is not used gpio: mcp23s08: Fix build error when CONFIG_SPI_MASTER=y && CONFIG_I2C=m gpio/omap: ensure gpio context is initialised
2013-05-20gpio: Don't override the error code in probe error handlingAxel Lin4-9/+6
Otherwise, we return 0 in probe error paths when gpiochip_remove() returns 0. Also show error message if gpiochip_remove() fails. Signed-off-by: Axel Lin <axel.lin@ingics.com> Cc: Tomoya MORINAGA <tomoya.rohm@gmail.com> Cc: Denis Turischev <denis@compulab.co.il> Cc: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-20gpio: mxs: Use set and clear capabilities of the gpio controllerMaxime Ripard1-1/+2
The current driver doesn't use the set and clear registers found on the mxs gpio controller. This leads the generic gpio controller to be using some internal value to avoid looking up the value stored in the registers, making it behave pretty much like a cache. This raises some coherency problem when a gpio is not modified by the gpio controller, while it can easily be fixed by using the set and clear registers. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-20gpio-langwell: fix irq conflicts when DT is not usedDavid Cohen1-7/+10
When DT is not used IOAPIC does not register irq domain. As result IOAPIC won't care about gpio-langwell's virq and may cause conflict if an irq number is equal to gpio-langwell's virq mapped beforehand. This patch tells gpio_langwell to not ignore irq_base if != 0 and preferably use it to avoid the conflict. If DT is used, irq_base can safely be 0. Signed-off-by: David Cohen <david.a.cohen@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-20gpio: mcp23s08: Fix build error when CONFIG_SPI_MASTER=y && CONFIG_I2C=mAxel Lin1-1/+1
This patch fixes below build error when CONFIG_SPI_MASTER=y && CONFIG_I2C=m && CONFIG_GPIO_MCP23S08=y. LD init/built-in.o drivers/built-in.o: In function `mcp23017_write': clkdev.c:(.text+0x1e14): undefined reference to `i2c_smbus_write_word_data' drivers/built-in.o: In function `mcp23017_read': clkdev.c:(.text+0x1e24): undefined reference to `i2c_smbus_read_word_data' drivers/built-in.o: In function `mcp23008_write': clkdev.c:(.text+0x1e8c): undefined reference to `i2c_smbus_write_byte_data' drivers/built-in.o: In function `mcp23008_read': clkdev.c:(.text+0x1e98): undefined reference to `i2c_smbus_read_byte_data' drivers/built-in.o: In function `mcp23008_read_regs': clkdev.c:(.text+0x1ed0): undefined reference to `i2c_smbus_read_byte_data' drivers/built-in.o: In function `mcp23s08_init': clkdev.c:(.init.text+0x30): undefined reference to `i2c_register_driver' drivers/built-in.o: In function `mcp23s08_exit': clkdev.c:(.exit.text+0x30): undefined reference to `i2c_del_driver' make: *** [vmlinux] Error 1 When CONFIG_I2C=m, meaning we can't build the drivers in with I2C support. Thus don't allow the drivers to be compiled as built-in when CONFIG_I2C=m. The real fix though is to break the driver apart into a SPI part, an I2C part and a common part. But that's something for 3.11 while this is something for 3.10/stable. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-18drivers/gpio: don't check resource with devm_ioremap_resourceWolfram Sang2-10/+0
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Stephen Warren <swarren@nvidia.com>
2013-05-13gpio/omap: ensure gpio context is initialisedJon Hunter1-3/+45
Commit a2797be (gpio/omap: force restore if context loss is not detectable) broke gpio support for OMAP when booting with device-tree because a restore of the gpio context being performed without ever initialising the gpio context. In other words, the context restored was bad. This problem could also occur in the non device-tree case, however, it is much less likely because when booting without device-tree we can detect context loss via a platform specific API and so context restore is performed less often. Nevertheless we should ensure that the gpio context is initialised on the first pm-runtime resume for gpio banks that could lose their state regardless of whether we are booting with device-tree or not. The context loss count was being initialised on the first pm-runtime suspend following a resume, by populating the get_count_loss_count() function pointer after the first pm-runtime resume. To make the code more readable and logical, initialise the context loss count on the first pm-runtime resume if the context is not yet valid. Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Santosh Shilimkar<santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-09Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds2-2/+1
Pull removal of GENERIC_GPIO from Grant Likely: "GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it is possible to do so which has been causing confusion and breakage. This branch does the work to completely eliminate GENERIC_GPIO." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: gpio: update gpio Chinese documentation Remove GENERIC_GPIO config option Convert selectors of GENERIC_GPIO to GPIOLIB blackfin: force use of gpiolib m68k: coldfire: use gpiolib mips: pnx833x: remove requirement for GENERIC_GPIO openrisc: default GENERIC_GPIO to false avr32: default GENERIC_GPIO to false xtensa: remove explicit selection of GENERIC_GPIO sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB powerpc: remove redundant GENERIC_GPIO selection unicore32: default GENERIC_GPIO to false unicore32: remove unneeded select GENERIC_GPIO arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB arm: remove redundant GENERIC_GPIO selection mips: alchemy: require gpiolib mips: txx9: change GENERIC_GPIO to GPIOLIB mips: loongson: use GPIO driver on CONFIG_GPIOLIB mips: remove redundant GENERIC_GPIO select
2013-05-07Merge tag 'soc-for-linus-2' of ↵Linus Torvalds3-0/+403
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates (part 2) from Arnd Bergmann: "These patches are all for Renesas shmobile, and depend on the earlier pinctrl updates. Remarkably, this adds support for three new SoCs: r8a73a4, r8a73a4 and r8a7778. The bulk of the code added for these is for pinctrl (using the new subsystem) and for clocks (not yet using the common clock subsystem). The latter will have to get converted in one of the upcoming releases, but shmobile is not ready for that yet. The series also contains Renesas shmobile board changes, adding one board file for each of the three new SoCs. These boards are using a mix of classic and device-tree based probing, as there is still a lot of infrastructure in shmobile that has not been converted to DT yet. Once those are resolved to the degree that no board specific setup code is needed, they can get folded into the respective SoC setup files." * tag 'soc-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (78 commits) ARM: shmobile: use r8a7790 timer setup code on Lager ARM: shmobile: force enable of r8a7790 arch timer ARM: shmobile: Add second I/O range for r8a7790 PFC ARM: shmobile: bockw: enable network settings on bootargs ARM: shmobile: bockw: add SMSC ethernet support ARM: shmobile: R8A7778: add Ether support ARM: shmobile: bockw: enable SMSC ethernet on defconfig ARM: shmobile: r8a7778: add r8a7778_init_irq_extpin() ARM: shmobile: r8a7778: remove pointless PLATFORM_INFO() ARM: shmobile: mackerel: clean up MMCIF vs. SDHI1 selection ARM: shmobile: mackerel: add interrupt names for SDHI0 ARM: shmobile: mackerel: switch SDHI and MMCIF interfaces to slot-gpio ARM: shmobile: mackerel: remove OCR masks, where regulators are used ARM: shmobile: mackerel: SDHI resources do not have to be numbered ARM: shmobile: Initial r8a7790 Lager board support ARM: shmobile: APE6EVM LAN9220 support ARM: shmobile: APE6EVM PFC support ARM: shmobile: APE6EVM base support ARM: shmobile: kzm9g-reference: add ethernet support ARM: shmobile: add R-Car M1A Bock-W platform support ...
2013-05-06Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds30-290/+1164
Pull GPIO changes from Grant Likely: "The usual selection of bug fixes and driver updates for GPIO. Nothing really stands out except the addition of the GRGPIO driver and some enhacements to ACPI support" I'm pulling this despite the earlier mess. Let's hope it compiles these days. * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: (46 commits) gpio: grgpio: Add irq support gpio: grgpio: Add device driver for GRGPIO cores gpiolib-acpi: introduce acpi_get_gpio_by_index() helper GPIO: gpio-generic: remove kfree() from bgpio_remove call gpio / ACPI: Handle ACPI events in accordance with the spec gpio: lpc32xx: Fix off-by-one valid range checking for bank gpio: mcp23s08: convert driver to DT gpio/omap: force restore if context loss is not detectable gpio/omap: optimise interrupt service routine gpio/omap: remove extra context restores in *_runtime_resume() gpio/omap: free irq domain in probe() failure paths gpio: gpio-generic: Add 16 and 32 bit big endian byte order support gpio: samsung: Add terminating entry for exynos_pinctrl_ids gpio: mvebu: add dbg_show function MAX7301 GPIO: Do not force SPI speed when using OF Platform gpio: gpio-tps65910.c: fix checkpatch error gpio: gpio-timberdale.c: fix checkpatch error gpio: gpio-tc3589x.c: fix checkpatch errors gpio: gpio-stp-xway.c: fix checkpatch error gpio: gpio-sch.c: fix checkpatch error ...
2013-05-05Merge tag 'mfd-3.10-1' of ↵Linus Torvalds1-13/+6
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next Pull MFD update from Samuel Ortiz: "For 3.10 we have a few new MFD drivers for: - The ChromeOS embedded controller which provides keyboard, battery and power management services. This controller is accessible through i2c or SPI. - Silicon Laboratories 476x controller, providing access to their FM chipset and their audio codec. - Realtek's RTS5249, a memory stick, MMC and SD/SDIO PCI based reader. - Nokia's Tahvo power button and watchdog device. This device is very similar to Retu and is thus supported by the same code base. - STMicroelectronics STMPE1801, a keyboard and GPIO controller supported by the stmpe driver. - ST-Ericsson AB8540 and AB8505 power management and voltage converter controllers through the existing ab8500 code. Some other drivers got cleaned up or improved. In particular: - The Linaro/STE guys got the ab8500 driver in sync with their internal code through a series of optimizations, fixes and improvements. - The AS3711 and OMAP USB drivers now have DT support. - The arizona clock and interrupt handling code got improved. - The wm5102 register patch and boot mechanism also got improved." * tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (104 commits) mfd: si476x: Don't use 0bNNN mfd: vexpress: Handle pending config transactions mfd: ab8500: Export ab8500_gpadc_sw_hw_convert properly mfd: si476x: Fix i2c warning mfd: si476x: Add header files and Kbuild plumbing mfd: si476x: Add chip properties handling code mfd: si476x: Add the bulk of the core driver mfd: si476x: Add commands abstraction layer mfd: rtsx: Support RTS5249 mfd: retu: Add Tahvo support mfd: ucb1400: Pass ucb1400-gpio data through ac97 bus mfd: wm8994: Add some OF properties mfd: wm8994: Add device ID data to WM8994 OF device IDs input: Export matrix_keypad_parse_of_params() mfd: tps65090: Add compatible string for charger subnode mfd: db8500-prcmu: Support platform dependant device selection mfd: syscon: Fix warnings when printing resource_size_t of: Add stub of_get_parent for non-OF builds mfd: omap-usb-tll: Convert to devm_ioremap_resource() mfd: omap-usb-host: Convert to devm_ioremap_resource() ...
2013-05-04Merge tag 'boards-for-linus' of ↵Linus Torvalds1-56/+95
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC board specific changes (part 1) from Olof Johansson: "These changes are all for board specific files. These used to make up a large portion of the ARM changes in the past, but as we are generalizing the support and moving to device tree probing, this has gotten significantly smaller. The only platform actually adding new code here at the moment is Renesas shmobile, as they are still busy converting their code to device tree and have not come far enough to not need it." * tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits) ARM: msm: USB_MSM_OTG needs USB_PHY ARM: davinci: da850 evm: fix const qualifier placement ARM: davinci: da850 board: add remoteproc support ARM: pxa: move debug uart code ARM: pxa: select PXA935 on saar & tavorevb ARM: mmp: add more compatible names in gpio driver ARM: pxa: move PXA_GPIO_TO_IRQ macro ARM: pxa: remove cpu_is_xxx in gpio driver ARM: Kirkwood: update Network Space Mini v2 description ARM: Kirkwood: DT board setup for CloudBox ARM: Kirkwood: sort board entries by ASCII-code order ARM: OMAP: board-4430sdp: Provide regulator to pwm-backlight ARM: OMAP: zoom: Use pwm stack for lcd and keyboard backlight ARM: OMAP2+: omap2plus_defconfig: Add support for BMP085 pressure sensor omap2+: Remove useless Makefile line omap2+: Remove useless Makefile line ARM: OMAP: RX-51: add missing regulator supply definitions for lis3lv02d ARM: OMAP1: fix omap_udc registration ARM: davinci: use is IS_ENABLED macro ARM: kirkwood: add MACH_GURUPLUG_DT to defconfig ...
2013-05-04Merge tag 'drivers-for-linus' of ↵Linus Torvalds4-364/+7
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Olof Johansson: "This is a rather large set of patches for device drivers that for one reason or another the subsystem maintainer preferred to get merged through the arm-soc tree. There are both new drivers as well as existing drivers that are getting converted from platform-specific code into standalone drivers using the appropriate subsystem specific interfaces. In particular, we can now have pinctrl, clk, clksource and irqchip drivers in one file per driver, without the need to call into platform specific interface, or to get called from platform specific code, as long as all information about the hardware is provided through a device tree. Most of the drivers we touch this time are for clocksource. Since now most of them are part of drivers/clocksource, I expect that we won't have to touch these again from arm-soc and can let the clocksource maintainers take care of these in the future. Another larger part of this series is specific to the exynos platform, which is seeing some significant effort in upstreaming and modernization of its device drivers this time around, which unfortunately is also the cause for the churn and a lot of the merge conflicts. There is one new subsystem that gets merged as part of this series: the reset controller interface, which is a very simple interface for taking devices on the SoC out of reset or back into reset. Patches to use this interface on i.MX follow later in this merge window, and we are going to have other platforms (at least tegra and sirf) get converted in 3.11. This will let us get rid of platform specific callbacks in a number of platform independent device drivers." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits) irqchip: s3c24xx: add missing __init annotations ARM: dts: Disable the RTC by default on exynos5 clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3} ARM: exynos: restore mach/regs-clock.h for exynos5 clocksource: exynos_mct: fix build error on non-DT pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register() irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure reset: NULL deref on allocation failure reset: Add reset controller API dt: describe base reset signal binding ARM: EXYNOS: Add arm-pmu DT binding for exynos421x ARM: EXYNOS: Add arm-pmu DT binding for exynos5250 ARM: EXYNOS: Enable PMUs for exynos4 irqchip: exynos-combiner: Correct combined IRQs for exynos4 irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq ARM: EXYNOS: fix compilation error introduced due to common clock migration clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3} clk: exynos4: export clocks required for fimc-is clk: samsung: Fix compilation error clk: tegra: fix enum tegra114_clk to match binding ...
2013-05-02Merge tag 'soc-for-linus' of ↵Linus Torvalds1-2/+19
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "This branch contains part 1 of the platform updates for 3.10. Among the highlights: - Support for the new Atmel Cortex-A5 based platforms (SAMA5D3) - New support for CSR SiRFatlas6 SoCs - A handful of updates for NVidia T114 (a.k.a. Tegra 4) - A bunch of updates for the shmobile platforms - A handful of updates for davinci - A few updates for Qualcomm MSM - Plus a handful of other patches, defconfig updates, etc." * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (135 commits) ARM: tegra: pm: fix build error w/o PM_SLEEP ARM: davinci: ensure global variables are declared ARM: davinci: sram.c: fix incorrect type in assignment ARM: davinci: da8xx dt: make file local symbols static ARM: davinci: da8xx: add remoteproc support ARM: socfpga: Upgrade clk driver for socfpga to make use of dts clock entries ARM: socfpga: Add clock entries into device tree ARM: socfpga: Enable soft reset ARM: EXYNOS: replace cpumask by the corresponding macro ARM: EXYNOS: handle properly the return values ARM: EXYNOS: factor out the idle states ARM: OMAP4: Enable fix for Cortex-A9 erratas ARM: OMAP2+: Export SoC information to userspace ARM: OMAP2+: SoC name and revision unification ARM: OMAP2+: Move common part of late init into common function ARM: tegra: pm: remove duplicated include from pm.c ARM: davinci: da850: override mmc DT node device name ARM: davinci: da850: add mmc DT entries mmc: davinci_mmc: add DT support ARM: SAMSUNG: check processor type before cache restoration in resume ...
2013-05-02Merge tag 'cleanup-for-linus' of ↵Linus Torvalds7-81/+155
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanup from Olof Johansson: "Here is a collection of cleanup patches. Among the pieces that stand out are: - The deletion of h720x platforms - Split of at91 non-dt platforms to their own Kconfig file to keep them separate - General cleanups and refactoring of i.MX and MXS platforms - Some restructuring of clock tables for OMAP - Convertion of PMC driver for Tegra to dt-only - Some renames of sunxi -> sun4i (Allwinner A10) - ... plus a bunch of other stuff that I haven't mentioned" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits) ARM: i.MX: remove unused ARCH_* configs ARM i.MX53: remove platform ahci support ARM: sunxi: Rework the restart code irqchip: sunxi: Rename sunxi to sun4i irqchip: sunxi: Make use of the IRQCHIP_DECLARE macro clocksource: sunxi: Rename sunxi to sun4i clocksource: sunxi: make use of CLKSRC_OF clocksource: sunxi: Cleanup the timer code ARM: at91: remove trailing semicolon from macros ARM: at91/setup: fix trivial typos ARM: EXYNOS: remove "config EXYNOS_DEV_DRM" ARM: EXYNOS: change the name of USB ohci header ARM: SAMSUNG: Remove unnecessary code for dma ARM: S3C24XX: Remove unused GPIO drive strength register definitions ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2412 ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2410 ARM: S3C24XX: Removed unneeded dependency on ARCH_S3C24XX for boards ARM: SAMSUNG: Fix typo "CONFIG_SAMSUNG_DEV_RTC" ARM: S5P64X0: Fix typo "CONFIG_S5P64X0_SETUP_SDHCI" ...
2013-04-29Merge tag 'pinctrl-for-v3.10' of ↵Linus Torvalds2-52/+88
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl update from Linus Walleij: "These are the pinctrl changes for v3.10: - Patrice Chotard contributed a new configuration debugfs interface and reintroduced fine-grained locking into the core: instead of having a "big pinctrl lock" we have a per-controller lock and specialized locks for the global controller and pinctrl handle lists. - Haoijan Zhuang deleted all the PXA and MMP2 pinctrl drivers and replaced them with pinctrl-single (which is also used by other SoCs) so we are gaining consolidation. The platform particulars now come in through the device tree. - Haoijan also added support for generic pin config into the pinctrl-single driver which is another big consolidation win. - Finally also GPIO ranges are now supported by the pinctrl-single driver. - Tomasz Figa contributed a new Samsung S3C pinctrl driver, bringing more of the older Samsung platforms under the pinctrl umbrella and out of arch/arm. - Maxime Ripard contributed new Allwinner A10/A13 drivers. - Sachin Kamat, Wei Yongjun and Axel Lin did a lot of cleanups." * tag 'pinctrl-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (66 commits) pinctrl: move subsystem mutex to pinctrl_dev struct pinctrl/pinconfig: fix misplaced goto pinctrl: s3c64xx: Fix build error caused by undefined chained_irq_enter pinctrl/pinconfig: add debug interface pinctrl: abx500: fix issue when no pdata pinctrl: pinctrl-single: add missing double quote pinctrl: sunxi: Rename wemac functions to emac pinctrl: exynos5440: add gpio interrupt support pinctrl: exynos5440: fix probe failure due to missing pin-list in config nodes pinctrl: ab8505: Staticize some symbols pinctrl: ab8540: Staticize some symbols pinctrl: ab9540: Staticize some symbols pinctrl: ab8500: Staticize some symbols pinctrl: abx500: Staticize some symbols pinctrl: Add pinctrl-s3c64xx driver pinctrl: samsung: Handle banks with two configuration registers pinctrl: samsung: Remove hardcoded register offsets pinctrl: samsung: Split pin bank description into two structures pinctrl: samsung: Include pinctrl-exynos driver data conditionally pinctrl: samsung: Protect bank registers with a spinlock ...
2013-04-28Merge branch 'gic/cleanup' into next/socOlof Johansson6-10/+6
Merge in the gic cleanup since it has a handful of annoying internal conflicts with soc development branches. All of them are delete/delete conflicts. * gic/cleanup: irqchip: vic: add include of linux/irq.h irqchip: gic: Perform the gic_secondary_init() call via CPU notifier irqchip: gic: Call handle_bad_irq() directly arm: Move chained_irq_(enter|exit) to a generic file arm: Move the set_handle_irq and handle_arch_irq declarations to asm/irq.h Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/mach-shmobile/smp-emev2.c arch/arm/mach-shmobile/smp-r8a7779.c arch/arm/mach-shmobile/smp-sh73a0.c arch/arm/mach-socfpga/platsmp.c
2013-04-28Merge branch 'fixes' into next/cleanupOlof Johansson2-5/+12
Merging in fixes since there's a conflict in the omap4 clock tables caused by it. * fixes: (245 commits) ARM: highbank: fix cache flush ordering for cpu hotplug ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock arm: mvebu: Fix the irq map function in SMP mode Fix GE0/GE1 init on ix2-200 as GE0 has no PHY ARM: S3C24XX: Fix interrupt pending register offset of the EINT controller ARM: S3C24XX: Correct NR_IRQS definition for s3c2440 ARM i.MX6: Fix ldb_di clock selection ARM: imx: provide twd clock lookup from device tree ARM: imx35 Bugfix admux clock ARM: clk-imx35: Bugfix iomux clock + Linux 3.9-rc6 Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/mach-omap2/cclock44xx_data.c
2013-04-26Merge branch 'samsung/exynos-multiplatform' into next/driversOlof Johansson1-1/+1
This merges in the revert of multiplatform support for exynos. Trivial conflicts on removed code. Also, needed to add "select COMMON_CLK" to the non-multiplatform EXYNOS config option. * samsung/exynos-multiplatform: Revert "ARM: exynos: enable multiplatform support" Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-26Revert "ARM: exynos: enable multiplatform support"Olof Johansson1-1/+1
This reverts commit bd51de53e1be9896d815bbea30560262216d4616. Turns out that multiplatform breaks some uses cases, such as when you have an existing defconfig, since it adds the new EXYNOS_SINGLE config option as a dependecy. As a result, nearly all exynos config options will be disabled by default. Reverting instead of rebasing since this branch is pulled in as a dependency elsewhere. Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-26gpio: grgpio: Add irq supportAndreas Larsson1-3/+359
The drivers sets up an irq domain and hands out unique irqs to irq capable gpio lines regardless of how underlying irq maps to gpio lines. Any gpio line can map to any one or none of the irqs of the core, independently of each other. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-26gpio: grgpio: Add device driver for GRGPIO coresAndreas Larsson3-0/+159
This driver supports GRGPIO gpio cores available in the GRLIB VHDL IP core library from Aeroflex Gaisler. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-24Revert "gpio: pxa: set initcall level to module init"Linus Walleij1-1/+6
This reverts commit 6c7e660a27da7494c670bfba21cfeba30457656c. The commit causes breakage on several older PXA machines. Reported-by: Mike Dunn <mikedunn@newsguy.com> Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-19Merge branch 'samsung/exynos-multiplatform' into next/driversArnd Bergmann1-1/+1
Merging this into the next/drivers branch avoids a number of pointless conflicts with code changed here. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-19ARM: exynos: enable multiplatform supportArnd Bergmann1-1/+1
This makes it possible to enable the exynos platform as part of a multiplatform kernel, in addition to keeping the single-platform exynos support. The multiplatform variant has a number of limitations at the moment: * It only supports DT-enabled machines. This is not a problem in the long run, as non-DT machines for exynos are going away. The main problem here is that the gpio code and the exynos_eint irqchip are not multiplatform capable but still required for ATAGS based boot. * The watchdog driver is still missing a conversion. * sparsemem and memory_holes are currently not supported in multiplatform. The the multiplatform aware ARCH_EXYNOS Kconfig symbol is disabled for now, as dependent patches are still pending in other subsystem trees. We will enable it once everything comes together. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-19mfd: ucb1400: Pass ucb1400-gpio data through ac97 busMarek Vasut1-13/+6
Cc: Jean Delvare <jdelvare@suse.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-16Remove GENERIC_GPIO config optionAlexandre Courbot2-2/+1
GENERIC_GPIO has been made equivalent to GPIOLIB in architecture code and all driver code has been switch to depend on GPIOLIB. It is thus safe to have GENERIC_GPIO removed. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-14Merge tag 'msm-cleanup-3.10' of ↵Olof Johansson1-71/+149
git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm into next/cleanup From David Brown: Cleanups for MSM for 3.10 These are some patches for various parts of MSM that gradually bring us closer to being part of single zimage. * tag 'msm-cleanup-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm: ARM: msm: Remove unused cpu.h header file gpio: Make gpio-msm-v1 into a platform driver mmc: msm_sdcc: Remove unnecessary include ARM: msm: Move dma.h #defines that are private to dma.c Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-12gpiolib-acpi: introduce acpi_get_gpio_by_index() helperMika Westerberg1-0/+77
Instead of open-coding ACPI GPIO resource lookup in each driver, we provide a helper function analogous to Device Tree version that allows drivers to specify which GPIO resource they are interested (using an index to the GPIO resources). The function then finds out the correct resource, translates the ACPI GPIO number to the corresponding Linux GPIO number and returns that. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-11GPIO: gpio-generic: remove kfree() from bgpio_remove callAlexander Shiyan1-5/+1
Memory for basic-mmio-gpio driver is allocated by the driver using it, whether it's the generic GPIO driver itself or another driver. In either case, the owner shall allocate and free the struct bgpio_chip it is using, preferably using a managed resource. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-11gpio: pca953x: fix irq_domain_add_simple usageAlexandre Belloni1-1/+1
We actually have to pass chip as the host_data parameter of irq_domain_add_simple() as later on, it is used to initialize chip_data in pca953x_gpio_irq_map(). Failing to do so is leading to a NULL pointer dereference after calling irq_data_get_irq_chip_data() in pca953x_irq_mask(), pca953x_irq_unmask(), pca953x_irq_bus_lock(), pca953x_irq_bus_sync_unlock() and pca953x_irq_set_type(). Fixes regression introduced by commit 0e8f2fdacf1d44651aa7e57063c76142d1f4988b (gpio: pca953x: use simple irqdomain) Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-11Merge branch 'armsoc/pxa' of git://github.com/hzhuang1/linux into next/boardsOlof Johansson1-56/+95
A series dealing with gpio configuration cleanup from Haojian Zhuang. * 'armsoc/pxa' of git://github.com/hzhuang1/linux: ARM: pxa: move debug uart code ARM: pxa: select PXA935 on saar & tavorevb ARM: mmp: add more compatible names in gpio driver ARM: pxa: move PXA_GPIO_TO_IRQ macro ARM: pxa: remove cpu_is_xxx in gpio driver Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-11ARM: mmp: add more compatible names in gpio driverHaojian Zhuang1-12/+13
Since more driver names are added into platform id, do the same thing on compatible names for DT mode. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-11ARM: pxa: move PXA_GPIO_TO_IRQ macroHaojian Zhuang1-11/+9
Since PXA_GPIO_TO_IRQ() & MMP_GPIO_TO_IRQ() macro are depended on arch code, move them from gpio driver to platform driver instead. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-11ARM: pxa: remove cpu_is_xxx in gpio driverHaojian Zhuang1-33/+73
Avoid to use cpu_is_xxx() in pxa gpio driver. Use platform_device_id to identify the difference. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-10gpio / ACPI: Handle ACPI events in accordance with the specRafael J. Wysocki1-20/+120
Commit 0d1c28a (gpiolib-acpi: Add ACPI5 event model support to gpio.) that added support for ACPI events signalled through GPIO interrupts covered only GPIO pins whose numbers are less than or equal to 255. However, there may be GPIO pins with numbers greater than 255 and the ACPI spec (ACPI 5.0, Section 5.6.5.1) requires the _EVT method to be used for handling events corresponding to those pins. Moreover, according to the spec, _EVT is the default mechanism for handling all ACPI events signalled through GPIO interrupts, so if the _Exx/_Lxx method is not present for the given pin, _EVT should be used instead. If present, though, _Exx/_Lxx take precedence over _EVT which shouldn't be executed in that case (ACPI 5.0, Section 5.6.5.3). Modify acpi_gpiochip_request_interrupts() to follow the spec as described above and add acpi_gpiochip_free_interrupts() needed to free interrupts associated with _EVT. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-10gpio: lpc32xx: Fix off-by-one valid range checking for bankAxel Lin1-1/+1
The valid bank should be 0 ... ARRAY_SIZE(lpc32xx_gpiochip) - 1. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-10gpio: mcp23s08: convert driver to DTLars Poeschel1-31/+106
This converts the mcp23s08 driver to be able to be used with device tree. There is a "spi-present-mask" device tree property, that allows to use multiple of this spi chips on the same chipselect. v4: - removed the ability to specify the pullup from device tree - updated binding doc v3: - removed mcp,chips device tree property in favour of a mcp,spi-present-mask and a flag for the pullup of every gpio - seperated the match table. Now there is one for i2c and one for spi - do the of reading stuff on stack of the probe function - no devm any more v2: - squashed booth patches together - fixed build warning, when CONFIG_OF is not defined - use of_match_ptr macro for of_match_table Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-10gpio/omap: force restore if context loss is not detectableJon Hunter1-8/+17
When booting with device-tree the function pointer for detecting context loss is not populated. Ideally, the pm_runtime framework should be enhanced to allow a means for reporting context/state loss and we could avoid populating such function pointers altogether. In the interim until a generic non-device specific solution is in place, force a restore of the gpio bank when enabling the gpio controller. Adds a new device-tree property for the OMAP GPIO controller to indicate if the GPIO controller is located in a power-domain that never loses power and hence will always maintain its logic state. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-10gpio/omap: optimise interrupt service routineJon Hunter1-7/+7
The OMAP GPIO interrupt service routine is checking each bit in the GPIO interrupt status register to see which bits are set. It is not efficient to check every bit especially if only a few bits are set. Therefore, instead of checking every bit use the __ffs() function, which returns the location of the first set bit, to find all the set bits. This optimisation was suggested-by and developed in collaboration with Felipe Balbi. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-10gpio/omap: remove extra context restores in *_runtime_resume()Tarun Kanti DebBarma1-4/+0
68942edb09f69b6e09522d1d346665eb3aadde49 (gpio/omap: fix wakeups on level-triggered GPIOs) already restores the fallingdetect and risingdetect contexts in *_runtime_resume(). These registers were modified in *_runtime_suspend() to include even those configured as level-triggered since only edge-triggered gpios can generate wakeup events. Therefore, the old context restores of the same registers present later in the code is not needed any more. Remove them. Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-10gpio/omap: free irq domain in probe() failure pathsJon Hunter1-2/+4
Currently the IRQ domain is not freed once allocated, in the case where omap_gpio_probe() fails. Therefore, ensure we free the domain if the probe does fail. Furthermore, the local variable "ret" is not needed and so remove this. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-10gpio: gpio-generic: Add 16 and 32 bit big endian byte order supportAndreas Larsson1-9/+47
There is no general support for 64-bit big endian accesses, so that is left unsupported. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09Merge branch 'tegra/soc' into next/driversArnd Bergmann1-2/+19
This is a dependency for the tegra/clk branch. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Conflicts: drivers/clocksource/tegra20_timer.c
2013-04-09Merge tag 'omap-for-v3.10/soc-signed' of ↵Arnd Bergmann2-5/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc From Tony Lindgren <tony@atomide.com>: Changes needed for enabling SOC_BUS for the SoC revision information. Also enable few HW errata workarounds for omap4. * tag 'omap-for-v3.10/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (236 commits) ARM: OMAP4: Enable fix for Cortex-A9 erratas ARM: OMAP2+: Export SoC information to userspace ARM: OMAP2+: SoC name and revision unification ARM: OMAP2+: Move common part of late init into common function Includes an update to Linux 3.9-rc6 Conflicts: arch/arm/mach-omap2/cclock44xx_data.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-09Merge tag 'tegra-for-3.10-soc' of ↵Arnd Bergmann1-2/+19
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/soc From Stephen Warren <swarren@wwwdotorg.org>: ARM: tegra: core SoC support development This branch includes major development on the core Tegra SoC support code in the mach-tegra directory: * SMP support for Tegra114. * Exposes SoC chip ID and revision through standard sysfs files. * System-level suspend/resume for Tegra20/30. At present, this only supports "LP2" mode (CPU power-down), but provides the basis to implement "LP0"/"LP1" (various levels of core/chip power-down) in the hopefully near future. * A minor cleanup of a duplicate include, which was introduced in this branch. This branch is based on the previous cleanup pull request. * tag 'tegra-for-3.10-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ARM: tegra: pm: remove duplicated include from pm.c ARM: tegra: cpuidle: remove redundant parameters for powered-down mode ARM: tegra: pm: add platform suspend support ARM: dt: tegra: add bindings of power management configurations for PMC ARM: tegra: irq: add wake up handling gpio: tegra: add gpio wakeup source handling ARM: tegra: moving the CPU power timer function to PMC driver ARM: tegra: add clock source of PMC to device trees ARM: tegra: add speedo-based process id for Tegra114 ARM: tegra: expose chip ID and revision ARM: tegra: bring up secondary CPU for Tegra114 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-09Merge tag 'v3.9-rc5' into next/cleanupArnd Bergmann1-3/+2
This is a dependency for the mxs/cleanup branch. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-09Merge tag 'omap-for-v3.10/board-signed' of ↵Arnd Bergmann2-5/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards From Tony Lindgren <tony@atomide.com>: Board related changes for v3.10 merge window. These are pretty much all non-critical fixes for platform device initialization that will be needed until we can drop the board-*.c files and move to DT based boot. * tag 'omap-for-v3.10/board-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: board-4430sdp: Provide regulator to pwm-backlight ARM: OMAP: zoom: Use pwm stack for lcd and keyboard backlight ARM: OMAP2+: omap2plus_defconfig: Add support for BMP085 pressure sensor omap2+: Remove useless Makefile line omap2+: Remove useless Makefile line ARM: OMAP: RX-51: add missing regulator supply definitions for lis3lv02d ARM: OMAP1: fix omap_udc registration Includes an update to Linux 3.9-rc6 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-09Merge tag 'davinci-for-v3.10/board' of ↵Arnd Bergmann1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/boards From Sekhar Nori <nsekhar@ti.com>: v3.10 board updates for DaVinci This pull request enables CGROUPS in defconfig and also cleans up mach-davinci to use IS_ENABLED() macro. * tag 'davinci-for-v3.10/board' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci: use is IS_ENABLED macro ARM: davinci: defconfig: enable CGROUPS Includes an update to v3.9-rc3 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-08Merge tag 'omap-for-v3.10/timer-signed' of ↵Arnd Bergmann1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers From Tony Lindgren <tony@atomide.com>: Clean-up for omap2+ timers from Jon Hunter <jon-hunter@ti.com>: This series consists mainly of clean-ups for clockevents and clocksource timers on OMAP2+ devices. The most significant change in functionality comes from the 5th patch which is changing the selection of the clocksource timer for OMAP3 and AM335x devices when gptimers are used for clocksource. Note that this series depends on 7185684 (ARM: OMAP: use consistent error checking) in RMK's tree and 960cba6 (ARM: OMAP5: timer: Update the clocksource name as per clock data) in omap-for-v3.10/fixes-non-critical. So this branch is based on a merge of 7185684 and omap-for-v3.10/fixes-non-critical to avoid non-trivial merge conflicts. * tag 'omap-for-v3.10/timer-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP4+: Fix sparse warning in system timers ARM: OMAP2+: Store ID of system timers in timer structure ARM: OMAP3: Update clocksource timer selection ARM: OMAP2+: Simplify system timers definitions ARM: OMAP2+: Simplify system timer clock definitions ARM: OMAP2+: Remove hard-coded test on timer ID ARM: OMAP2+: Display correct system timer name ARM: OMAP2+: fix typo "CONFIG_BRIDGE_DVFS" ARM: OMAP1: remove "config MACH_OMAP_HTCWIZARD" ARM: OMAP: dpll: enable bypass clock only when attempting dpll bypass ARM: OMAP2+: powerdomain: avoid testing whether an unsigned char is less than 0 ARM: OMAP2+: hwmod: Remove unused _HWMOD_WAKEUP_ENABLED flag ARM: OMAP2+: am335x: Change the wdt1 func clk src to per_32k clk ARM: OMAP2+: AM33xx: hwmod: Add missing sysc definition to wdt1 entry Signed-off-by: Arnd Bergmann <arnd@arndb.de>