summaryrefslogtreecommitdiffstats
path: root/drivers/gpio
AgeCommit message (Collapse)AuthorFilesLines
2013-10-05Merge tag 'gpio-v3.12-2' of ↵Linus Torvalds1-57/+101
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Two patches for the OMAP driver, dealing with setting up IRQs properly on the device tree boot path" * tag 'gpio-v3.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio/omap: auto-setup a GPIO when used as an IRQ gpio/omap: maintain GPIO and IRQ usage separately
2013-10-01gpio/omap: auto-setup a GPIO when used as an IRQJavier Martinez Canillas1-46/+83
The OMAP GPIO controller HW requires a pin to be configured in GPIO input mode in order to operate as an interrupt input. Since drivers should not be aware of whether an interrupt pin is also a GPIO or not, the HW should be fully configured/enabled as an IRQ if a driver solely uses IRQ APIs such as request_irq(), and never calls any GPIO-related APIs. As such, add the missing HW setup to the OMAP GPIO controller's irq_chip driver. Since this bypasses the GPIO subsystem we have to ensure that another driver won't be able to request the same GPIO pin that is used as an IRQ and set its direction as output. Requesting the GPIO and setting its direction as input is allowed though. This fixes smsc911x ethernet support for tobi and igep OMAP3 boards and OMAP4 SDP SPI based ethernet that use a GPIO as an interrupt line. Cc: stable@vger.kernel.org Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: George Cherian <george.cherian@ti.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Tested-by: Lars Poeschel <poeschel@lemonage.de> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-01gpio/omap: maintain GPIO and IRQ usage separatelyJavier Martinez Canillas1-14/+21
The GPIO OMAP controller pins can be used as IRQ and GPIO independently so is necessary to keep track GPIO pins and IRQ lines usage separately to make sure that the bank will always be enabled while being used. Also move gpio_is_input() definition in preparation for the next patch that setups the controller's irq_chip driver when a caller requests an interrupt line. Cc: stable@vger.kernel.org Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: George Cherian <george.cherian@ti.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Tested-by: Lars Poeschel <poeschel@lemonage.de> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-22gpio: rcar: Remove #gpio-range-cells DT property usageLaurent Pinchart1-4/+3
Commit a1bc260bb5f5d95da854be7898202d788e94448d ("gpio: clean up gpio-ranges documentation") deprecated the #gpio-range-cells property. Replace its usage with a hardcoded value in the gpio-rcar driver. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-13Remove GENERIC_HARDIRQ config optionMartin Schwidefsky1-3/+3
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-12Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds3-0/+166
Pull MIPS updates from Ralf Baechle: "This has been sitting in -next for a while with no objections and all MIPS defconfigs except one are building fine; that one platform got broken by another patch in your tree and I'm going to submit a patch separately. - a handful of fixes that didn't make 3.11 - a few bits of Octeon 3 support with more to come for a later release - platform enhancements for Octeon, ath79, Lantiq, Netlogic and Ralink SOCs - a GPIO driver for the Octeon - some dusting off of the DECstation code - the usual dose of cleanups" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (65 commits) MIPS: DMA: Fix BUG due to smp_processor_id() in preemptible code MIPS: kexec: Fix random crashes while loading crashkernel MIPS: kdump: Skip walking indirection page for crashkernels MIPS: DECstation HRT calibration bug fixes MIPS: Export copy_from_user_page() (needed by lustre) MIPS: Add driver for the built-in PCI controller of the RT3883 SoC MIPS: DMA: For BMIPS5000 cores flush region just like non-coherent R10000 MIPS: ralink: Add support for reset-controller API MIPS: ralink: mt7620: Add cpu-feature-override header MIPS: ralink: mt7620: Add spi clock definition MIPS: ralink: mt7620: Add wdt clock definition MIPS: ralink: mt7620: Improve clock frequency detection MIPS: ralink: mt7620: This SoC has EHCI and OHCI hosts MIPS: ralink: mt7620: Add verbose ram info MIPS: ralink: Probe clocksources from OF MIPS: ralink: Add support for systick timer found on newer ralink SoC MIPS: ralink: Add support for periodic timer irq MIPS: Netlogic: Built-in DTB for XLP2xx SoC boards MIPS: Netlogic: Add support for USB on XLP2xx MIPS: Netlogic: XLP2xx update for I2C controller ...
2013-09-10Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds1-2/+2
Pull device tree core updates from Grant Likely: "Generally minor changes. A bunch of bug fixes, particularly for initialization and some refactoring. Most notable change if feeding the entire flattened tree into the random pool at boot. May not be significant, but shouldn't hurt either" Tim Bird questions whether the boot time cost of the random feeding may be noticeable. And "add_device_randomness()" is definitely not some speed deamon of a function. * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: of/platform: add error reporting to of_amba_device_create() irq/of: Fix comment typo for irq_of_parse_and_map of: Feed entire flattened device tree into the random pool of/fdt: Clean up casting in unflattening path of/fdt: Remove duplicate memory clearing on FDT unflattening gpio: implement gpio-ranges binding document fix of: call __of_parse_phandle_with_args from of_parse_phandle of: introduce of_parse_phandle_with_fixed_args of: move of_parse_phandle() of: move documentation of of_parse_phandle_with_args of: Fix missing memory initialization on FDT unflattening of: consolidate definition of early_init_dt_alloc_memory_arch() of: Make of_get_phy_mode() return int i.s.o. const int include: dt-binding: input: create a DT header defining key codes. of/platform: Staticize of_platform_device_create_pdata() of: Specify initrd location using 64-bit dt: Typo fix OF: make of_property_for_each_{u32|string}() use parameters if OF is not enabled
2013-09-07Merge tag 'gpio-v3.12-1' of ↵Linus Torvalds49-1019/+1775
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v3.12 series: - A new driver for the TZ1090 PDC which is used on the metag architecture. - A new driver for the Kontron ETX or COMexpress GPIO block. This is found on some ETX x86 devices. - A new driver for the Fintek Super-I/O chips, used on some x86 boards. - Added device tree probing on a few select GPIO blocks. - Drop the Exynos support from the Samsung GPIO driver. The Samsung maintainers have moved over to use the modernized pin control driver to provide GPIO for the modern platforms instead. - The usual bunch of non-critical fixes and cleanups" * tag 'gpio-v3.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (36 commits) gpio: return -ENOTSUPP if debounce cannot be set gpio: improve error path in gpiolib gpio: add GPIO support for F71882FG and F71889F of: add vendor prefix for Microchip Technology Inc gpio: mcp23s08: rename the device tree property gpio: samsung: Drop support for Exynos SoCs gpio: pcf857x: Remove pdata argument to pcf857x_irq_domain_init() gpio: pcf857x: Sort headers alphabetically gpio: max7301: Reverting "Do not force SPI speed when using OF Platform" gpio: Fix bit masking in Kontron PLD GPIO driver gpio: pca953x: fix gpio input on gpio offsets >= 8 drivers/gpio: simplify use of devm_ioremap_resource drivers/gpio/gpio-omap.c: convert comma to semicolon gpio-lynxpoint: Fix warning about unbalanced pm_runtime_enable gpio: Fix platform driver name in Kontron PLD GPIO driver gpio: adnp: Fix segfault if request_threaded_irq fails gpio: msm: Staticize local variable 'msm_gpio' gpio: gpiolib-of.c: make error message more meaningful by adding the node name and index gpio: use dev_get_platdata() gpio/mxc: add chained_irq_enter/exit() to mx2_gpio_irq_handler ...
2013-09-04gpio: return -ENOTSUPP if debounce cannot be setLinus Walleij1-2/+5
It appears some drivers are using gpio_set_debounce() opportunistically, i.e. without knowing whether it works or not. (Example: input/keyboard/gpio_keys.c) to account for this use case, return -ENOTSUPP and do not print any warnings in this case. Took a round over the other gpio_set_debounce() consumers to make sure that none of them are relying on the returned error code to be something specific. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03gpio: improve error path in gpiolibLinus Walleij1-16/+25
At several places the gpiolib will proceed to handle a GPIO descriptor even if it's ->chip member is NULL and no gpiochip is associated. Fix this by checking that both the descriptor cookie *and* the chip pointer are valid. Also bail out earlier with more specific diagnostic messages on missing operations for setting as input/output or debounce. ChangeLog v1->v2: - Also return -EIO on gpiod_set_debounce() with missing operations in the vtable - Fix indentations. Suggested-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Frank Rowand <frank.rowand@sonymobile.com> Cc: Tim Bird <tim.bird@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-30gpio: add GPIO support for F71882FG and F71889FSimon Guinot3-0/+480
This patch adds support for the GPIOs found on the Fintek super-I/O chips F71882FG and F71889F. A super-I/O is a legacy I/O controller embedded on x86 motherboards. It is used to connect the low-bandwidth devices. Among others functions the F71882FG/F71889F provides: a parallel port, two serial ports, a keyboard controller, an hardware monitoring controller and some GPIO pins. Note that this super-I/Os are embedded on some Atom-based LaCie NASes. The GPIOs are used to control the LEDs and the hard drive power. Changes since v3: - Use request_muxed_region to protect the I/O ports against concurrent accesses. Changes since v2: - Remove useless NULL setters for driver data. Changes since v1: - Enhance the commit message by describing what is a Super-I/O. - Use self-explanatory names for the GPIO register macros. - Add a comment to explain the platform device and driver registration. - Fix gpio_get when GPIO is configured in input mode. I only had the hardware to check this mode recently... Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-30gpio: mcp23s08: rename the device tree propertyLars Poeschel1-7/+34
The device tree property should be more descriptive. microchip seems more reasonable than mcp. The old mcp prefix is still supported but marked as deprecated. Users of mcp have to switch to the microchip prefix. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-29gpio: implement gpio-ranges binding document fixStephen Warren1-2/+2
Use the new of_parse_phandle_with_fixed_args() to implement the corrected gpio-ranges DT property definition. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-08-29gpio: (gpio-pca953x) move header to linux/platform_data/Vivien Didelot1-1/+1
This patch moves the pca953x.h header from include/linux/i2c to include/linux/platform_data and updates existing support accordingly. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-29gpio: samsung: Drop support for Exynos SoCsTomasz Figa1-871/+0
GPIO support on Exynos SoCs is provided by pinctrl-samsung driver, leaving all the support code in gpio-samsung driver unused. This dead code can be safely removed and so it is done by this patch. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-26gpio MIPS/OCTEON: Add a driver for OCTEON's on-chip GPIO pins.David Daney3-0/+166
The SOCs in the OCTEON family have 16 (or in some cases 20) on-chip GPIO pins, this driver handles them all. Configuring the pins as interrupt sources is handled elsewhere (OCTEON's irq handling code). Signed-off-by: David Daney <david.daney@cavium.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5633/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-08-23gpio: pcf857x: Remove pdata argument to pcf857x_irq_domain_init()Laurent Pinchart1-5/+4
The argument is not used, remove it. No board registers a pcf857x device with an IRQ without specifying platform data, IRQ domain registration behaviour is thus not affected by this change. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-23gpio: pcf857x: Sort headers alphabeticallyLaurent Pinchart1-2/+2
This makes checking for duplicates when adding a new #include easier. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-23gpio: max7301: Reverting "Do not force SPI speed when using OF Platform"Christophe Leroy1-2/+1
This patch reverts commit 047b93a35961f7a6561e6f5dcb040738f822b892 which breaks MAX7301 GPIO driver because that commit was dependant on a rejected patch that was implementing selection of SPI speed from the Device Tree. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-16gpio: Fix bit masking in Kontron PLD GPIO driverBrunner Michael1-15/+9
This patch fixes the bit masking within the GPIO driver. The masking is basically done twice which causes the wrong GPIOs to be addressed. Signed-off-by: Michael Brunner <michael.brunner@kontron.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-16gpio: pca953x: fix gpio input on gpio offsets >= 8Andrew Ruder1-1/+1
This change fixes a regression introduced by commit f5f0b7aa8 (gpio: pca953x: make the register access by GPIO bank) When the pca953x driver was converted to using 8-bit reads/writes the bitmask in pca953x_gpio_get_value wasn't adjusted with a modulus BANK_SZ and consequently looks at the wrong bits in the input register. Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-16drivers/gpio: simplify use of devm_ioremap_resourceJulia Lawall2-12/+2
Remove unneeded error handling on the result of a call to platform_get_resource when the value is passed to devm_ioremap_resource. Move the call to platform_get_resource adjacent to the call to devm_ioremap_resource to make the connection between them more clear. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression pdev,res,n,e,e1; expression ret != 0; identifier l; @@ - res = platform_get_resource(pdev, IORESOURCE_MEM, n); ... when != res - if (res == NULL) { ... \(goto l;\|return ret;\) } ... when != res + res = platform_get_resource(pdev, IORESOURCE_MEM, n); e = devm_ioremap_resource(e1, res); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-16drivers/gpio/gpio-omap.c: convert comma to semicolonJulia Lawall1-1/+1
Replace a comma between expression statements by a semicolon. This changes the semantics of the code, but given the current indentation appears to be what is intended. A simplified version of the semantic patch that performs this transformation is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ expression e1,e2,e; type T; identifier i; @@ e1 -, +; e2; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-16gpio-lynxpoint: Fix warning about unbalanced pm_runtime_enableMathias Nyman1-0/+1
Missing pm_runtime_disable call in driver remove path caused an unbalanaced pm_runtime_enable warning when driver was reloaded Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-16gpio: Fix platform driver name in Kontron PLD GPIO driverMichael Brunner1-1/+1
This patch changes the driver name to be consistent with the name that is registered as cell name in the MFD driver. Otherwise the driver won't load. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Kevin Strasser <strassek@engr.orst.edu> Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
2013-08-16gpio: adnp: Fix segfault if request_threaded_irq failsLars Poeschel1-5/+1
In case request_threaded_irq inside adnp_irq_setup fails, the driver segfaults. This is because irq_domain_remove is called twice with the same pointer. First time in adnp_irq_setup and then a second time after leaving adnp_irq_setup in the error path of adnp_i2c_probe inside adnp_teardown. This fixes this by removing the call to irq_domain_remove from adnp_irq_setup. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-16gpio: msm: Staticize local variable 'msm_gpio'Jingoo Han1-1/+1
The local variable 'msm_gpio' is used only in this file. Fix the following sparse warning: drivers/gpio/gpio-msm-v2.c:109:21: warning: symbol 'msm_gpio' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-16gpio: gpiolib-of.c: make error message more meaningful by adding the node ↵Lothar Waßmann1-1/+2
name and index Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-16gpio: use dev_get_platdata()Jingoo Han31-42/+45
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-16gpio/mxc: add chained_irq_enter/exit() to mx2_gpio_irq_handlerUwe Kleine-König1-0/+4
Similar to commit 0e44b6e (gpio/mxc: add chained_irq_enter/exit() to mx3_gpio_irq_handler()) . It doesn't seem to be critical to make the irqs work, but still it is more correct. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-16gpio-mcp23s08: i2c: auto-select base if no DT match or platform dataDaniel M. Weeks1-5/+4
The call to gpiochip_add made by this driver is capable of auto-selecting a base if one is not provided. However, it was not called unless there was already a DT entry or platform data. This patch calls it even if the base is not already known so that gpiochip_add can attempt to find a usable base. Signed-off-by: Daniel M. Weeks <dan@danweeks.net> Acked-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-16gpio: palmas: Fix misreported GPIO out valueAndrew Chew1-2/+15
It seems that the value read back from the PALMAS_GPIO_DATA_IN register isn't valid if the GPIO direction is out. When that's the case, we can read back the PALMAS_GPIO_DATA_OUT register to get the proper output value. Signed-off-by: Andrew Chew <achew@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-31gpio_msm: Fix build error due to missing err.hStephen Boyd1-0/+1
drivers/gpio/gpio-msm-v1.c: In function 'gpio_msm_v1_probe': drivers/gpio/gpio-msm-v1.c:656:2: error: implicit declaration of function 'IS_ERR' [-Werror=implicit-function-declaration] drivers/gpio/gpio-msm-v1.c:657:3: error: implicit declaration of function 'PTR_ERR' [-Werror=implicit-function-declaration] This driver failed to compile after commit 68515bb (gpio_msm: Convert to use devm_ioremap_resource, 2013-06-10). Acked-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-31Revert "gpio/omap: don't create an IRQ mapping for every GPIO on DT"Linus Walleij1-40/+14
This reverts commit 0e970cec05635adbe7b686063e2548a8e4afb8f4. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-31Revert "gpio/omap: auto request GPIO as input if used as IRQ via DT"Linus Walleij1-18/+0
This reverts commit b4419e1a15905191661ffe75ba2f9e649f5d565e. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-31Revert "gpio/omap: fix build error when OF_GPIO is not defined."Linus Walleij1-14/+2
This reverts commit 949eb1a4d29dc75e0b5b16b03747886b52ecf854. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-29gpio: palmas: add dt supportLaxman Dewangan1-1/+11
Add of_device_id table for Palma GPIO to be enable the driver from DT file. The driver can be registered from DT file as: palmas: tps65913@58 { ::::::::::: palmas_gpio: palmas_gpio { compatible = "ti,palmas-gpio"; gpio-controller; #gpio-cells = <2>; }; }; Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-23gpio: gpio-mxc: Include "<linux/err.h>"Fabio Estevam1-0/+1
Commit 8cd73e4e (gpio: gpio-mxc: Use devm functions) causes the following build error on imx_v4_v7_defconfig: drivers/gpio/gpio-mxc.c:414:2: error: implicit declaration of function 'IS_ERR' [-Werror=implicit-function-declaration] drivers/gpio/gpio-mxc.c:415:3: error: implicit declaration of function 'PTR_ERR' [-Werror=implicit-function-declaration] Note: imx_v6_v7_defconfig does not give this build error, probably due to some indirect header file inclusion. Reported-by: Olof Johansson <olof@lixom.net> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-21gpio: pxa: remove dead codeDaniel Mack1-10/+3
Commit f87311743 ("ARM: mmp: add more compatible names in gpio driver") changed the driver logic to determine the number of available GPIOs from the compatible string, and hence obsoleted the (undocumented) child nodes that were previously necessary. However, it left some remainder which can be safely removed now. Also, this patch makes pxa_gpio_probe_dt() return the correct value in case irq_alloc_descs() fails. Signed-off-by: Daniel Mack <zonque@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-21gpio: em: Add pinctrl supportMagnus Damm1-0/+25
Register the GPIO pin range, and request and free GPIO pins using the pinctrl API. The pctl_name platform data member should be used by platform devices to point out which pinctrl device to use. Follows same style as "dc3465a gpio-rcar: Add pinctrl support", by Laurent Pinchart, thanks to him. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-21gpio: Kontron PLD gpio driverGuenter Roeck3-0/+238
Add gpio support for the on-board PLD found on some Kontron embedded modules. Originally-from: Michael Brunner <michael.brunner@kontron.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com> Acked-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-21gpiolib: replace strict_strtol() with kstrtol()Jingoo Han1-4/+4
The usage of strict_strtol() is not preferred, because strict_strtol() is obsolete. Thus, kstrtol() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-20drivers: gpio: msm: Fix the error condition for reading ngpioRohit Vaswani1-1/+1
of_property_read_u32 return 0 on success. The check was using a ! to return error. Fix the if condition. Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Pankaj Jangra <jangra.pankaj9@gmail.com> Cc: "Bird, Tim" <Tim.Bird@sonymobile.com> Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-20GPIO: gpio-twl6040: Remove support for legacy (pdata) modePeter Ujfalusi1-5/+1
TWL6040 is used only with OMAP4/5 SoCs and they can only boot in in DT mode. The support for pdata/legacy boot can be removed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-20gpio: gpio-mxc: Use devm functionsFabio Estevam1-28/+8
By using devm functions we can get a simpler code. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-20gpio-tz1090: convert to use generic irqchipJames Hogan2-75/+49
Convert gpio-tz1090 driver to use generic irqchips. This allows the irq_ack, irq_mask, and irq_unmask callbacks and associated helper functions to be removed. Also switch to using irq_setup_alt_chip() in the irq_set_type callback instead of using __irq_set_handler_locked(). Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Grant Likely <grant.likely@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-20gpio-tz1090-pdc: add TZ1090 PDC gpio driverJames Hogan3-0/+251
Add a GPIO driver for the low-power Powerdown Controller GPIOs in the TZ1090 SoC. The driver is instantiated by device tree and supports interrupts for the SysWake GPIOs only. Changes in v4: - fix typos in DT bindings compatible properties - reference Documentation/devicetree/bindings/gpio/gpio.txt in gpio-ranges description in DT bindings - fix gpio-ranges examples in DT bindings (it must now have 3 cells) Changes in v3: - separated from irq-imgpdc and removed arch/metag changes to allow these patches to go upstream separately via the pinctrl[/gpio] trees (particularly the pinctrl drivers depend on the new pinconf DT bindings). - some s/unsigned/unsigned int/. - gpio-tz1090*: refer to <dt-bindings/gpio/gpio.h> and <dt-bindings/interrupt-controller/irq.h> flags in bindings. - gpio-tz1090*: move initcall from postcore to subsys. Changes in v2: - gpio-tz1090-pdc: remove references to Linux flags in dt bindings - gpio-tz1090-pdc: make use of BIT() from linux/bitops.h - gpio-tz1090-pdc: make register accessors inline to match pinctrl - gpio-tz1090-pdc: update gpio-ranges to use 3 cells after recent ABI breakage Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-doc@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-20gpio-tz1090: add TZ1090 gpio driverJames Hogan3-0/+641
Add a GPIO driver for the main GPIOs found in the TZ1090 (Comet) SoC. This doesn't include low-power GPIOs as they're controlled separately via the Powerdown Controller (PDC) registers. The driver is instantiated by device tree and supports interrupts for all GPIOs. Changes in v4: - fix typos in DT bindings compatible properties - reference Documentation/devicetree/bindings/gpio/gpio.txt in gpio-ranges description in DT bindings - fix gpio-ranges examples in DT bindings (it must now have 3 cells) - gpio-tz1090: use of_property_read_u32 instead of of_get_property Changes in v3: - separated from irq-imgpdc and removed arch/metag changes to allow these patches to go upstream separately via the pinctrl[/gpio] trees (particularly the pinctrl drivers depend on the new pinconf DT bindings). - some s/unsigned/unsigned int/. - some s/unsigned int/bool/ and use of BIT(). - gpio-tz1090*: refer to <dt-bindings/gpio/gpio.h> and <dt-bindings/interrupt-controller/irq.h> flags in bindings. - gpio-tz1090*: move initcall from postcore to subsys. - gpio-tz1090: add REG_ prefix to some constants for consistency. - gpio-tz1090: add comment to explain tz1090_gpio_irq_next_edge cunningness. Changes in v2: - gpio-tz1090: remove references to Linux flags in dt bindings - gpio-tz1090: make use of BIT() from linux/bitops.h - gpio-tz1090: make register accessors inline to match pinctrl - gpio-tz1090: update gpio-ranges to use 3 cells after recent ABI breakage Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-doc@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-20gpio/omap: fix build error when OF_GPIO is not defined.Javier Martinez Canillas1-2/+14
The OMAP GPIO driver check if the chip has an associated Device Tree node using the struct gpio_chip of_node member. But this is only build if CONFIG_OF_GPIO is defined which leads to the following error when using omap1_defconfig: linux/drivers/gpio/gpio-omap.c: In function 'omap_gpio_chip_init': linux/drivers/gpio/gpio-omap.c:1080:17: error: 'struct gpio_chip' has no member named 'of_node' linux/drivers/gpio/gpio-omap.c: In function 'omap_gpio_irq_map': linux/drivers/gpio/gpio-omap.c:1116:16: error: 'struct gpio_chip' has no member named 'of_node' Reported-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-20gpio/omap: auto request GPIO as input if used as IRQ via DTJavier Martinez Canillas1-0/+18
When an OMAP GPIO is used as an IRQ line, a call to gpio_request() has to be made to initialize the OMAP GPIO bank before a driver request the IRQ. Otherwise the call to request_irq() fails. Drives should not be aware of this neither care wether an IRQ line is a GPIO or not. They should just request the IRQ and this has to be handled by the irq_chip driver. With the current OMAP GPIO DT binding, if we define: gpio6: gpio@49058000 { compatible = "ti,omap3-gpio"; reg = <0x49058000 0x200>; interrupts = <34>; ti,hwmods = "gpio6"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; interrupt-parent = <&gpio6>; interrupts = <16 8>; The GPIO is correctly mapped as an IRQ but a call to gpio_request() is never made. Since a call to the custom IRQ domain .map function handler is made for each GPIO used as an IRQ, the GPIO can be setup and configured as input there automatically. Changes since v3: - Use bank->chip.of_node instead of_have_populated_dt() to check DT or legacy boot as suggested by Jean-Christophe PLAGNIOL-VILLARD - Add a comment that this is just a temporary solution until and that it has to be removed once is handled by the IRQ core. Changes since v2: - Only make the call to gpio_request_one() conditional in the DT case as suggested by Grant Likely. Changes since v1: - Split the irq domain mapping function handler and the GPIO request in two different patches. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-31 21:50:46 +0000