summaryrefslogtreecommitdiffstats
path: root/drivers/gpio
AgeCommit message (Collapse)AuthorFilesLines
2018-01-02gpiolib: don't dereference a desc before validationVladimir Zapolskiy1-1/+2
The fix restores a proper validation of an input gpio desc, which might be needed to deal with optional GPIOs correctly. Fixes: 02e479808b5d ("gpio: Alter semantics of *raw* operations to actually be raw") Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-28gpio: fix aspeed_gpio_banks array size checkVasyl Gomonovych1-1/+1
The test should be >= ARRAY_SIZE() instead of > ARRAY_SIZE(). Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-21gpiolib: Fix typo in comment ("piochip_add_data")Jonathan Neuschäfer1-1/+1
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-21gpio: reduce descriptor validation code sizeRasmus Villemoes1-30/+27
While we do need macros to be able to return from the "calling" function, we can still factor the checks done by the VALIDATE_DESC* macros into a real helper function. This reduces the backslashtitis, avoids duplicating the logic in the two macros and saves about 1K of generated code: $ scripts/bloat-o-meter drivers/gpio/gpiolib.o.{0,1} add/remove: 1/0 grow/shrink: 0/15 up/down: 104/-1281 (-1177) Function old new delta validate_desc - 104 +104 gpiod_set_value 192 135 -57 gpiod_set_raw_value 125 67 -58 gpiod_direction_output 412 351 -61 gpiod_set_value_cansleep 150 70 -80 gpiod_set_raw_value_cansleep 132 52 -80 gpiod_get_raw_value 139 54 -85 gpiod_set_debounce 226 140 -86 gpiod_direction_output_raw 124 38 -86 gpiod_get_value 161 74 -87 gpiod_cansleep 126 39 -87 gpiod_get_raw_value_cansleep 130 39 -91 gpiod_get_value_cansleep 152 59 -93 gpiod_is_active_low 128 33 -95 gpiod_request 299 184 -115 gpiod_direction_input 386 266 -120 Total: Before=25460, After=24283, chg -4.62% Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-21Revert "gpio: set up initial state from .get_direction()"Timur Tabi1-24/+7
This reverts commit 72d3200061776264941be1b5a9bb8e926b3b30a5. We cannot blindly query the direction of all GPIOs when the pins are first registered. The get_direction callback normally triggers a read/write to hardware, but we shouldn't be touching the hardware for an individual GPIO until after it's been properly claimed. Signed-off-by: Timur Tabi <timur@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-20drivers: gpio: remove duplicate includesPravin Shedge1-1/+0
These duplicate includes have been found with scripts/checkincludes.pl but they have been removed manually to avoid removing false positives. Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com> Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-20gpio: sysfs: avoid using kstrtol() in 'value' attribute writeChristophe Leroy1-2/+7
A 'perf record' on an app continuously writing in the 'value' attribute show that most of the time is spent in kstrtol() --17.99%--value_store | |--10.17%--kstrtoint | | | |--8.82%--kstrtoll | |--2.50%--gpiod_set_value_cansleep | |--1.82%--u16_gpio_set | |--1.46%--value_store The normal case is to write 0 or 1 in the attribute, therefore this patch avoids the call to kstrtol() in the most common cases Then 'perf record' shows --7.21%--value_store | |--2.69%--u16_gpio_set | |--1.47%--value_store | |--1.08%--gpiod_set_value_cansleep | |--0.60%--mutex_lock | --0.58%--mutex_unlock Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-20gpio: sysfs: don't use sprintf() for 'value' attributeChristophe Leroy1-1/+3
A bench with 'perf record' shows that most of time spent in value_show() is spent in sprintf() --42.41%--sysfs_kf_read | |--39.73%--dev_attr_show | | | |--38.23%--value_show | | | | | |--29.22%--sprintf | | | | | |--2.94%--gpiod_get_value_cansleep | | | value_show() only returns "0\n" or "1\n", therefore the use of sprintf() can be avoided With this patch we get the following result with 'perf record' --13.89%--sysfs_kf_read | |--10.72%--dev_attr_show | | | |--9.44%--value_show | | | | | |--4.61%--gpiod_get_value_cansleep Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-20gpio: sysfs: correct error handling on 'value' attribute read.Christophe Leroy1-1/+5
'value' attribute is supposed to only return 0 or 1 according to the documentation. With today's implementation, if gpiod_get_value_cansleep() fails the printed 'value' is a negative value. This patch ensures that an error is returned on read instead. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-20gpio: sysfs: change 'value' attribute to preallocChristophe Leroy1-1/+1
The GPIO 'value' attribute is time critical. A small bench with 'perf record' on the app below shows that 80% of the time spent in sysfs_kf_seq_show() is spent in memset() for zeroising the buffer. |--67.48%--sysfs_kf_seq_show | | | |--54.40%--memset | | | |--11.49%--dev_attr_show | | | | | |--10.06%--value_show | | | | | | | |--4.75%--sprintf | | | | | This patch changes the attribute type to prealloc, eliminating the need to zeroise the buffer at each read. 'perf record' gives the following result. |--42.41%--sysfs_kf_read | | | |--39.73%--dev_attr_show | | | | | |--38.23%--value_show | | | | | | | |--29.22%--sprintf | | | | | Test done with the following small app: int main(int argc, char **argv) { int fd = open(argv[1], O_RDONLY); for (;;) { int buf[512]; read(fd, buf, 512); lseek(fd, 0, SEEK_SET); } exit(0); } Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-20gpiolib: use kstrdup_const() for gpio_device labelBartosz Golaszewski1-6/+3
Users often pass a pointer to a static string to gpiochip_add_data() family of functions. Avoid unnecessary memory allocations with the provided helper routine. While at it: use a ternary operator instead of an if else for brevity. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-20gpiolib: constify label in gpio_deviceBartosz Golaszewski1-1/+1
This string is never modified. Make it const. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-08gpio: mockup: fix a return value checkBartosz Golaszewski1-2/+2
The return value of platform_device_register_resndata() on error is an error code converted to pointer with ERR_PTR(), not NULL. Check the return value correctly. Fixes: 8a39f597bcfd ("gpio: mockup: rework device probing") Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-07Merge branch 'ib-move-axp209' into develLinus Walleij3-195/+0
2017-12-07pinctrl: move gpio-axp209 to pinctrlQuentin Schulz3-196/+0
To prepare the driver for the upcoming pinctrl features, move the GPIO driver AXP209 from GPIO to pinctrl subsystem. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-07gpio: axp209: switch unsigned variables to unsigned intQuentin Schulz1-6/+7
Checkpatch complains with the following message: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' Let's make it happy by switching over to unsigned int. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: ftgpio010: Fix platform_get_irq's error checkingArvind Yadav1-2/+2
The platform_get_irq() function returns negative if an error occurs. zero or positive number on success. platform_get_irq() error checking for zero is not correct. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: aspeed: Add support for reset toleranceAndrew Jeffery1-2/+37
Use the new pinconf parameter for state persistence to expose the associated capability of the Aspeed GPIO controller. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: gpiolib: Generalise state persistence beyond sleepAndrew Jeffery4-12/+71
General support for state persistence is added to gpiolib with the introduction of a new pinconf parameter to propagate the request to hardware. The existing persistence support for sleep is adapted to include hardware support if the GPIO driver provides it. Persistence continues to be enabled by default; in-kernel consumers can opt out, but userspace (currently) does not have a choice. The *_SLEEP_MAY_LOSE_VALUE and *_SLEEP_MAINTAIN_VALUE symbols are renamed, dropping the SLEEP prefix to reflect that the concept is no longer sleep-specific. I feel that renaming to just *_MAY_LOSE_VALUE could initially be misinterpreted, so I've further changed the symbols to *_TRANSITORY and *_PERSISTENT to address this. The sysfs interface is modified only to keep consistency with the chardev interface in enforcing persistence for userspace exports. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: gpio-stmpe: make various char arrays static const, shrinks object sizeColin Ian King1-9/+15
Don't populate the read-only arrays edge_det_values, rise_values and fall_values on the stack but instead make them static and constify them. Makes the object code smaller by over 240 bytes: Before: text data bss dec hex filename 9525 2520 192 12237 2fcd drivers/gpio/gpio-stmpe.o After: text data bss dec hex filename 9025 2776 192 11993 2ed9 drivers/gpio/gpio-stmpe.o (gcc version 7.2.0 x86_64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: it87: fix mojibake in module metadataAdam Borowski1-1/+1
It had twice-encoded Unicode. Signed-off-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: add helpers for accessing the gpio rangesBartosz Golaszewski1-4/+14
In order to avoid repeating the calculations on every access - add helpers for gpio base and ngpio components of the ranges array. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: rename gpio_mockup_params_nr to gpio_mockup_num_rangesBartosz Golaszewski1-6/+6
This variable holds the number of mockup GPIO ranges so rename it accordingly. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: modify the return value check for devm_irq_sim_init()Bartosz Golaszewski1-1/+1
As discussed with Marc Zyngier: irq_sim_init() and its devres variant should return the base of the allocated interrupt range on success rather than 0. This will be modified later - first, change the way users handle the return value of these routines. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: implement gpio_mockup_set_multiple()Bartosz Golaszewski1-0/+11
Implement the set_multiple() callback and register it with the gpiolib framework. This is only meant to also test the internal kernel API. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: tweak line breaksBartosz Golaszewski1-4/+4
Minor readability tweak: prefer breaking the lines in a way where the second part is longer than the first. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: verify that ngpio > 0Bartosz Golaszewski1-0/+9
Improve the module params sanitization: bail out from init if the user tries to pass a non-positive number of GPIO lines for any mockup chip. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: fix debugfs handlingBartosz Golaszewski1-5/+5
The debugfs routines returning pointers can return NULL or error codes embedded with ERR_PTR(). Check the return values with IS_ERR_OR_NULL(). While we're at it: make the error message more specific so it's not confused with the one emitted when the top-level gpio-mockup debugfs directory creation fails. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: group code by logicBartosz Golaszewski1-23/+23
Keep GPIO chip callbacks, event trigger callbacks and mockup chip setup code visibly separated. We're mostly good - just need to move the line naming routine below. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: change the type of value field in line state structBartosz Golaszewski1-1/+1
GPIO values are universally represented as integers. Change the type of the variable storing the current line value to int for consistency. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: extend the debugfs layoutBartosz Golaszewski1-2/+8
Currently each chip has a dedicated directory in debugfs for event triggers. We use the chip's label for the directory name, but the user can't really associate these directories with chip names without parsing the relevant sysfs entries. Use chip names for directory names. For backward compatibility: create links pointing to the actual directories named using the chip labels. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: pass the named_lines parameter over platform_dataBartosz Golaszewski1-1/+3
Move the last bits of code dealing with module parameters to the init function. Add a new variable to platform data, which indicates to the probe function if it should name the GPIO lines. If we ever want to make the line naming more fine-grained (e.g. per chip switch) it will be easier this way. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: merge gpio_mockup_add() into gpio_mockup_probe()Bartosz Golaszewski1-47/+31
Now that the probe() function only does what is should, there's no need to split the chip adding logic into a separate routine. Merge gpio_mockup_add() into gpio_mockup_probe(). Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: remove a stray tabBartosz Golaszewski1-1/+1
Minor coding style fix. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: implement gpio_mockup_err()Bartosz Golaszewski1-6/+5
Visually shrink the pr_err() calls by encapsulating adding the module name prefix to the message in a macro. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: rework device probingBartosz Golaszewski1-51/+71
We currently create a single platform device in init and then parse the configuration passed to us via module parameters in probe() before creating GPIO chips and registering them with the gpiolib framework. The relation between platform devices and mockup chips should be 1:1. Create a separate platform device for each mockup chip using convenient helpers (platform_device_register_resndata()). Pass a platform data structure to probe() in which the configuration (GPIO base, number of lines, chip index) extracted from the module params is stored. Make probe() create a single mockup chip for every platform device. This approach has several advantages: - we only parse the module parameters in init() and can bail out before attaching any device if the input is invalid (currently we would have to examine kernel logs), - we'll get notified by the device framework about errors in probe() for specific chips, - probe() gets simplified and only does what it's supposed to. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: verify the number of GPIO chips requestedBartosz Golaszewski1-1/+3
The number of supported mockup chips is limited. Check this limit when parsing the module parameters. Also: make sure that each chip is described with a <base - ngpio> pair. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: parse the module params in init, not probeBartosz Golaszewski1-3/+3
If the module parameters are invalid, we should bail out from the init function instead of detecting it during the device probe. That way we don't even allow the user to load the module if we don't accept the arguments. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: add missing prefixesBartosz Golaszewski1-11/+12
Add the gpio_mockup_ prefix to the remaining symbols that still don't have it, so that the entire driver code is consistent. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: ath79: add missing MODULE_DESCRIPTION/LICENSEJesse Chan1-0/+3
This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-ath79.o see include/linux/module.h for more information This adds the license as "GPL v2", which matches the header of the file. MODULE_DESCRIPTION is also added. Signed-off-by: Jesse Chan <jc@linux.com> Acked-by: Alban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: iop: add missing MODULE_DESCRIPTION/AUTHOR/LICENSEJesse Chan1-0/+4
This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-iop.o see include/linux/module.h for more information This adds the license as "GPL", which matches the header of the file. MODULE_DESCRIPTION and MODULE_AUTHOR are also added. Signed-off-by: Jesse Chan <jc@linux.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30Merge branch 'ib-gpio-acpi-quirks' into develLinus Walleij3-24/+45
2017-11-30gpio: omap: initialize gpioirq chip as part of gpiochip_add_dataGrygorii Strashko1-18/+14
Hence, series from Thierry Reding [1] merged - the OMAP GPIO driver can be switched to reuse new feature and just fill new struct gpio_irq_chip before calling gpiochip_add_data() instead of using few separate gpioirq chip APIs. gpiochip_add_data() will do the job and create and initialize gpioirq chip [1] https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1531592.html Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30gpiolib: don't allow OPEN_DRAIN & OPEN_SOURCE flags simultaneouslyBartosz Golaszewski1-0/+9
Do not allow OPEN_SOURCE & OPEN_DRAIN flags in a single request. If the hardware actually supports enabling both at the same time the electrical result would be disastrous. Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30gpiolib: acpi: Introduce NO_RESTRICTION quirkAndy Shevchenko1-3/+10
Allow to relax IoRestriction for certain cases. One of the use case is incorrectly cooked ACPI table where interrupt pin is defined with GpioIo() macro with IoRestrictionOutputOnly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30gpiolib: acpi: Add quirks field to struct acpi_gpio_mappingAndy Shevchenko2-2/+10
Some broken ACPI tables might require quirks in the OS. Introduce quirks field in struct acpi_gpio_mapping. Propagate them to struct acpi_gpio_info for further use. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30gpiolib: acpi: Consolidate debug output in acpi_gpio_update_gpiod_flags()Andy Shevchenko3-12/+19
We have the duplicated debug strings printed whenever acpi_gpio_update_gpiod_flags() fails. Instead of doing this by callers, move the debug output inside function. In one case convert almost useless pr_debug() to dev_dbg() where actual consumer of GPIO resource is disclosed. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30gpiolib: acpi: Move adev member to struct acpi_gpio_infoAndy Shevchenko2-5/+7
The further improvements are based on this change since struct acpi_gpio_lookup is not available in some cases. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30gpiolib: acpi: Don't contaminate return parameter in case of errorAndy Shevchenko1-1/+1
If error occurs, leave lookup parameter untouched. There is no functional change, since all current callers just bail out in case of error without using the assigned pieces. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30gpiolib: acpi: Assign polarity when call acpi_populate_gpio_lookup()Andy Shevchenko1-5/+2
There is no need, since we preserve firmware settings, to override polarity for GpioInt() resources. While Documentation/gpio-properties.txt refers to any from GpioIo() / GpioInt() resources, the active_low flag has been introduced to fill the gap only for GpioIo() which lacks of that information. Moreover, in case of GpioInt() existed solution was broken anyway, it overrides only in one direction, i.e. from 0 to 1, otherwise it would be still 1 as defined in the resource macro. So, move the assignment to a right place and forbid to (semi-)override polarity for GpioInt() type of resources. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 01:33:40 +0000