summaryrefslogtreecommitdiffstats
path: root/drivers/gpio
AgeCommit message (Collapse)AuthorFilesLines
2016-10-11gpio: pca953x: add a comment explaining the need for a lockdep subclassBartosz Golaszewski1-0/+16
This is a follow-up to commit 559b46990e76 ("gpio: pca953x: fix an incorrect lockdep warning"). The reason for calling lockdep_set_subclass() in pca953x_probe() is not explained in the code. Add a comment describing the problem, partial solution and required future extensions. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-10-07Merge branch 'i2c/for-4.9' of ↵Linus Torvalds1-7/+9
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Here is the 4.9 pull request from I2C including: - centralized error messages when registering to the core - improved lockdep annotations to prevent false positives - DT support for muxes, gates, and arbitrators - bus speeds can now be obtained from ACPI - i2c-octeon got refactored and now supports ThunderX SoCs, too - i2c-tegra and i2c-designware got a bigger bunch of updates - a couple of standard driver fixes and improvements" * 'i2c/for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (71 commits) i2c: axxia: disable clks in case of failure in probe i2c: octeon: thunderx: Limit register access retries i2c: uniphier-f: fix misdetection of incomplete STOP condition gpio: pca953x: variable 'id' was used twice i2c: i801: Add support for Kaby Lake PCH-H gpio: pca953x: fix an incorrect lockdep warning i2c: add a warning to i2c_adapter_depth() lockdep: make MAX_LOCKDEP_SUBCLASSES unconditionally visible i2c: export i2c_adapter_depth() i2c: rk3x: Fix variable 'min_total_ns' unused warning i2c: rk3x: Fix sparse warning i2c / ACPI: Do not touch an I2C device if it belongs to another adapter i2c: octeon: Fix high-level controller status check i2c: octeon: Avoid sending STOP during recovery i2c: octeon: Fix set SCL recovery function i2c: rcar: add support for r8a7796 (R-Car M3-W) i2c: imx: make bus recovery through pinctrl optional i2c: meson: add gxbb compatible string i2c: uniphier-f: set the adapter to master mode when probing i2c: uniphier-f: avoid WARN_ON() of clk_disable() in failure path ...
2016-10-05Merge tag 'gpio-v4.9-1' of ↵Linus Torvalds50-516/+3086
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.9 series: Subsystem improvements: - do away with the last users of the obsolete Kconfig options ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB (the latter always sounded like an item on a wishlist to Santa Claus to me). We can now select GPIOLIB and be done with it, for all archs. After some struggle it even work on UM. Not that it has GPIO, but if it wants to, it can select the library. - continued efforts to make drivers properly either tristate or bool. - introduce a warning for drivers assigning default triggers to their irqchip lines when probed from device tree, so we find and fix these ambigous drivers. It is agreed that in the OF config path, the device tree defines trigger characteristics. - the same warning, mutatis mutandis, for ACPI-probed GPIO irqchips. - we introduce the ability to mark certain IRQ lines as "unusable" as they can be taken by BIOS/firmware, unrouted in silicon and generally nasty if you use them, and such things. This is put to good use in the STMPE driver and also in the Cherryview pin control driver. - a new "mockup" virtual GPIO device that can be used for testing. The plan is to add unit tests under tools/* for exercising this device and verify that the kernel code paths are working as they should. - make memory-mapped I/O-drivers depend on HAS_IOMEM. This was implicit all the time, but when people started building UM with allyesconfig or allmodconfig it exploded in their face. - move some stray bits of device tree and ACPI HW description callbacks down into their respective implementation silo. These were causing issues when compiling on !HAS_IOMEM as well, so now eventually UM compiles the GPIOLIB library if it wants to. New drivers: - new driver for the Aspeed GPIO front-end companion to the pin controller merged through the pin control tree. - new driver for the LP873x PMIC GPIO portions. - new driver for Technologic Systems' I2C FPGA GPIO such as TS4900, TS-7970, TS-7990 and TS-4100. - new driver for the Broadcom BCM63xx series including BCM6338 and BCM6345. - new driver for the Intel WhiskeyCove PMIC GPIO. - new driver for the Allwinner AXP209 PMIC GPIO portions. - new driver for Diamond Systems 48 line GPIO-MM, another of these port-mapped I/O expansion cards. - support the STMicroelectronics STMPE1600 variant in the STMPE driver. Driver improvements: - the STMPE driver now supports rising/falling edge detection properly for IRQs. - the PCA954x will now fetch and enable its VCC regulator properly. - major rework of the PCA953x driver with the goal of eventually switching it over to use regmap and thus modernize it even more. - switch the IOP driver to use the generic MMIO GPIO library. - move the ages old HTC EGPIO (extended GPIO) GPIO expander driver over to this subsystem from MFD, achieveing some separation of concerns" * tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (81 commits) gpio: add missing static inline gpio: OF: localize some gpiochip init functions gpio: acpi: separation of concerns gpio: OF: separation of concerns gpio: make memory-mapped drivers depend on HAS_IOMEM gpio: stmpe: use BIT() macro gpio: stmpe: forbid unused lines to be mapped as IRQs mfd/gpio: Move HTC GPIO driver to GPIO subsystem gpio: MAINTAINERS: Add an entry for GPIO mockup driver gpio/mockup: add virtual gpio device gpio: Added zynq specific check for special pins on bank zero gpio: axp209: Implement get_direction gpio: aspeed: remove redundant return value check gpio: loongson1: remove redundant return value check ARM: omap2: fix missing include gpio: tc3589x: fix up complaints on unsigned gpio: tc3589x: add .get_direction() and small cleanup gpio: f7188x: use gpiochip_get_data instead of container_of gpio: tps65218: use devm_gpiochip_add_data() for gpio registration gpio: aspeed: fix return value check in aspeed_gpio_probe() ...
2016-10-03gpio: add missing static inlineLinus Walleij1-3/+7
of_get_named_gpiod_flags() was missing a static inline version when compiling without OF_GPIO. Add this. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-03gpio: OF: localize some gpiochip init functionsLinus Walleij1-0/+4
of_gpiochip_add() and of_gpiochip_remove() are only used locally in the gpio subsystem so move these functions to the local header. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-03gpio: acpi: separation of concernsLinus Walleij3-58/+63
The generic GPIO library directly implement code for acpi_find_gpio() which is only used with CONFIG_ACPI. This was probably done because OF did the same thing, but I removed that so remove this too. Rename the internal acpi_find_gpio() in gpiolib-acpi.c to acpi_populate_gpio_lookup() which seems to be more appropriate anyway so as to avoid a namespace clash with the same function. Make the stub return -ENOENT rather than -ENOSYS (as that is for syscalls!). For some reason the sunxi pin control driver was including the private gpiolib header, it works just fine without it so remove that oneliner. Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-03gpio: OF: separation of concernsLinus Walleij3-39/+55
The generic GPIO library directly implement code for of_find_gpio() which is only used with CONFIG_OF and causes compilation problems on archs that do not even have stubs for OF functions, especially on UM that does not implement any IO remap functions. Move the function to gpiolib-of.c, implement a static inline stub in gpiolib.h returning PTR_ERR(-ENOENT) if CONFIG_OF_GPIO is not set and be done with it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-03gpio: make memory-mapped drivers depend on HAS_IOMEMLinus Walleij1-0/+2
This one is pretty obvious: on UM Linux compilation of things like allmodconfig and allyesconfig will fail due to the absence of IO memory. Simply make these drivers depend on HAS_IOMEM, it has been implicitly assumed all the time, so just make it explicit. The generic MMIO library also assumes that IOMEM is present so make also this depend on HAS_IOMEM. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-30gpio: stmpe: use BIT() macroLinus Walleij1-12/+12
Avoid custom (1 << bits) shifting by consequently using the BIT() macro from <linux/bitops.h>. Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-30gpio: stmpe: forbid unused lines to be mapped as IRQsLinus Walleij1-0/+11
Exploit the new mechanism for masking off disallowed IRQs added by Mika Westerberg to properly manage the STMPE "norequest mask" to disallow also mapping said lines as IRQs. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-28Merge branch 'ib-move-htc-egpio' into develLinus Walleij3-0/+449
2016-09-28mfd/gpio: Move HTC GPIO driver to GPIO subsystemLinus Walleij3-0/+449
The HTC GPIO driver is a pure GPIO driver and I just can not see what it is doing inside MFD. Let's just move it to GPIO and take this opportunity to move the platform data to <linux/platform_data/gpio-htc-egpio.h> Cc: arm@kernel.org Cc: Russell King <linux@armlinux.org.uk> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-26gpio/mockup: add virtual gpio deviceBamvor Jian Zhang3-0/+227
This patch add basic structure of a virtual gpio device(gpio-mockup) for testing gpio subsystem. The tester could manipulate such device through userspace(sysfs or char device) and check the result from debugfs. Currently, it support one or more gpiochip(determined by module parameters with base,ngpio pair). One could test the overlap of different gpiochip and test the direction and/or output values of these chips. Signed-off-by: Kamlakant Patel <kamlakant.patel@broadcom.com> Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-24gpio: pca953x: variable 'id' was used twiceWolfram Sang1-7/+7
sparse rightfully said: drivers/gpio/gpio-pca953x.c:771:45: warning: symbol 'id' shadows an earlier one drivers/gpio/gpio-pca953x.c:742:36: originally declared here So, name them explicitly 'i2c_id' and 'acpi_id' to avoid any confusion. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-24gpio: pca953x: fix an incorrect lockdep warningBartosz Golaszewski1-0/+2
If an I2C GPIO multiplexer is driven by a GPIO provided by an expander when there's a second expander using the same device driver on one of the I2C bus segments, lockdep prints a deadlock warning when trying to set the direction or the value of the GPIOs provided by the second expander. The below diagram presents the setup: - - - - - ------- --------- Bus segment 1 | | | | | |--------------- Devices | | SCL/SDA | | | | | Linux |-----------| I2C MUX | - - - - - | | | | | Bus segment 2 | | | | |------------------- ------- | --------- | | | - - - - - ------------ | MUX GPIO | | | | | Devices | GPIO | | | | | Expander 1 |---- - - - - - | | | ------------ | SCL/SDA | ------------ | | | GPIO | | Expander 2 | | | ------------ The reason for lockdep warning is that we take the chip->i2c_lock in pca953x_gpio_set_value() or pca953x_gpio_direction_output() and then come right back to pca953x_gpio_set_value() when the GPIO mux kicks in. The locks actually protect different expanders, but for lockdep both are of the same class, so it says: Possible unsafe locking scenario: CPU0 ---- lock(&chip->i2c_lock); lock(&chip->i2c_lock); *** DEADLOCK *** May be due to missing lock nesting notation In order to get rid of the warning, retrieve the adapter nesting depth and use it as lockdep subclass for chip->i2c_lock. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-23gpio: Added zynq specific check for special pins on bank zeroNava kishore Manne1-2/+13
This patch adds zynq specific check for bank 0 pins 7 and 8 are special and cannot be used as inputs Signed-off-by: Nava kishore Manne <navam@xilinx.com> Reported-by: Jonas Karlsson <Jonas.d.karlsson@gmail.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-23gpio: axp209: Implement get_directionMaxime Ripard1-0/+30
Implement the get_direction callback for the GPIOs found in the AXP209 PMIC. Due to the way they are implemented, in the same register you have the muxing options, GPIO directions and GPIO values. Since you have no control over what value is there at reset, simply use output as the default. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-23gpio: aspeed: remove redundant return value checkWei Yongjun1-3/+0
Remove unneeded error handling on the result of a call to platform_get_resource() when the value is passed to devm_ioremap_resource(). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-23gpio: loongson1: remove redundant return value checkWei Yongjun1-5/+0
Remove unneeded error handling on the result of a call to platform_get_resource() when the value is passed to devm_ioremap_resource(). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-23Merge tag 'v4.8-rc6' into develLinus Walleij5-12/+13
Linux 4.8-rc6
2016-09-23Merge branch 'gpio-irq-validmask' of /home/linus/linux-pinctrl into develLinus Walleij1-3/+63
2016-09-23Merge branch 'gpio-irq-validmask' into develLinus Walleij1-3/+63
2016-09-23gpiolib: Make it possible to exclude GPIOs from IRQ domainMika Westerberg1-3/+63
When using GPIO irqchip helpers to setup irqchip for a gpiolib based driver, it is not possible to select which GPIOs to add to the IRQ domain. Instead it just adds all GPIOs which is not always desired. For example there might be GPIOs that for some reason cannot generated normal interrupts at all. To support this we add a flag irq_need_valid_mask to struct gpio_chip. When this flag is set the core allocates irq_valid_mask that holds one bit for each GPIO the chip has. By default all bits are set but drivers can manipulate this using set_bit() and clear_bit() accordingly. Then when gpiochip_irqchip_add() is called, this mask is checked and all GPIOs with bit is set are added to the IRQ domain created for the GPIO chip. Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-19gpio: tc3589x: fix up complaints on unsignedLinus Walleij1-11/+11
A bunch of variables were just declared "unsigned" and should be "unsigned int". Fix it up for this driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-19gpio: tc3589x: add .get_direction() and small cleanupLinus Walleij1-6/+23
This adds a .get_direction() callback to the TC3589x and renames the function for setting single-ended mode to be more to the point. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-18gpio: f7188x: use gpiochip_get_data instead of container_ofAmitesh Singh1-2/+1
gpiochip_add_data is already used to add data pointer and chip. Lets rely on gpiochip_get_data which is getting used in other gpio_chip functions. Signed-off-by: Amitesh Singh <singh.amitesh@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-18gpio: tps65218: use devm_gpiochip_add_data() for gpio registrationWei Yongjun1-11/+2
Use devm_gpiochip_add_data() for GPIO registration and remove the need of driver callback .remove. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-15gpio: aspeed: fix return value check in aspeed_gpio_probe()Wei Yongjun1-2/+2
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-15gpio: wcove: fix implicit assumption module.h is presentPaul Gortmaker1-0/+1
The Kconfig for this file is: drivers/gpio/Kconfig:config GPIO_WHISKEY_COVE drivers/gpio/Kconfig: tristate "GPIO support for Whiskey Cove PMIC" ...but however it does not include module.h -- it in turn gets it from another header (gpio/driver.h) and we'd like to replace that with a forward delcaration of "struct module;" but if we do, this file will fail to compile. So we fix this first to avoid putting build failures into the bisect commit history. Cc: Ajay Thomas <ajay.thomas.david.rajamanickam@intel.com> Cc: Bin Gao <bin.gao@intel.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-15gpio: loongson1: fix implicit assumption module.h is presentPaul Gortmaker1-0/+1
The Kconfig for this file is: drivers/gpio/Kconfig:config GPIO_LOONGSON1 drivers/gpio/Kconfig: tristate "Loongson1 GPIO support" ...but however it does not include module.h -- it in turn gets it from another header (gpio/driver.h) and we'd like to replace that with a forward delcaration of "struct module;" but if we do, this file will fail to compile. So we fix this first to avoid putting build failures into the bisect commit history. Cc: Keguang Zhang <keguang.zhang@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-15gpio: ath79: fix implicit assumption module.h is presentPaul Gortmaker1-0/+1
The Kconfig for this file is: drivers/gpio/Kconfig:config GPIO_ATH79 drivers/gpio/Kconfig: tristate "Atheros AR71XX/AR724X/AR913X GPIO support" ...but however it does not include module.h -- it in turn gets it from another header (gpio/driver.h) and we'd like to replace that with a forward delcaration of "struct module;" but if we do, this file will fail to compile. So we fix this first to avoid putting build failures into the bisect commit history. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-15gpio: altera: fix implicit assumption module.h is presentPaul Gortmaker1-0/+1
The Kconfig for this file is: drivers/gpio/Kconfig:config GPIO_ALTERA drivers/gpio/Kconfig: tristate "Altera GPIO" ...but however it does not include module.h -- it in turn gets it from another header (gpio/driver.h) and we'd like to replace that with a forward delcaration of "struct module;" but if we do, this file will fail to compile. So we fix this first to avoid putting build failures into the bisect commit history. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-15gpio: ts4800: fix implicit assumption module.h is presentPaul Gortmaker1-0/+1
The Kconfig for this file is: drivers/gpio/Kconfig:config GPIO_TS4800 drivers/gpio/Kconfig: tristate "TS-4800 DIO blocks and compatibles" ...but however it does not include module.h -- it in turn gets it from another header (gpio/driver.h) and we'd like to replace that with a forward delcaration of "struct module;" but if we do, this file will fail to compile. So we fix this first to avoid putting build failures into the bisect commit history. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-15gpio: sx150x: fix implicit assumption module.h is presentPaul Gortmaker1-2/+0
This file is currently getting module.h from a global gpio header and it will faii to build once we remove module.h from that. However, the driver is controlled with the following Kconfig: drivers/gpio/Kconfig:config GPIO_SX150X drivers/gpio/Kconfig: bool "Semtech SX150x I2C GPIO expander" and hence the two lines of MODULE_DEVICE_TABLE are no-ops that can simply be deleted. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-15gpio: palmas: fix implicit assumption module.h is presentPaul Gortmaker1-1/+0
This file is currently getting module.h from a global gpio header and it will fail to build once we remove module.h from that. However, the driver is controlled with the following Kconfig: drivers/gpio/Kconfig:config GPIO_PALMAS drivers/gpio/Kconfig: bool "TI PALMAS series PMICs GPIO" and hence the line of MODULE_DEVICE_TABLE is a no-op that can simply be deleted. In fact it should have been removed in an earlier commit that did demodularization, however the unseen include prevented my build testing from detecting it. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-13Revert "gpio: pca953x: initialize ret to zero to avoid returning garbage"Linus Walleij1-1/+1
This reverts commit 313b9a9938bf4076425741121d5d766826793e5d. This was already fixed by commit bf62efeb164343916ebb89dca6dfe5e6b6751700 "gpio: pca954x: fix undefined error code from remove" The latter is a better fix since it makes it easier to detect erronous code by not assigning a default error code. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-13gpio: aspeed: add MODULE_LICENSE()Linus Walleij1-0/+1
The build complains about missing MODULE_LICENSE() in the Aspeed GPIO driver. The license is evident from the file header, put in "GPL". Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Alistair Popple <alistair@popple.id.au> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: Andrew Jeffery <andrew@aj.id.au> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-13gpiolib: Forbid irqchip default trigger for ACPI enumerated devicesMika Westerberg1-1/+6
Follow DT and forbid default trigger if the GPIO irqchip device is enumerated from ACPI. Triggering for these devices will be configured automatically from ACPI interrupt resources provided by the BIOS. Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-13gpio: constify gpio_chip structuresJulia Lawall20-20/+20
These structures are only used to copy into other structures, so declare them as const. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct gpio_chip i@p = { ... }; @ok@ identifier r.i; expression e; position p; @@ e = i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct gpio_chip e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct gpio_chip i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-13gpio: lp873x: Use devm_gpiochip_add_data() for gpio registrationWei Yongjun1-11/+1
Use devm_gpiochip_add_data() for GPIO registration and remove the need of driver callback .remove. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-13Merge tag 'ib-mfd-gpio-regulator-v4.9' of ↵Linus Walleij3-0/+204
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into devel Immutable branch between MFD, GPIO and Regulator due for the v4.9 merge window
2016-09-12gpio: pca953x: initialize ret to zero to avoid returning garbageColin Ian King1-1/+1
ret is not initialized so it contains garbage. Ensure garbage is not returned in the case that pdata && pdata->teardown is false by initializing ret to 0. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12gpio: iop: Use generic GPIO MMIO functions for driverAlexander Shiyan2-94/+24
This patch switches the driver to use the generic GPIO MMIO functions that removes a bit of redundant and duplicate code. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12gpio: fix documentation for gpiod_unexportAmitesh Singh1-2/+2
Both gpio_export and gpio_free APIs are obsolete now. Signed-off-by: Amitesh Singh <singh.amitesh@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12gpio: pca953x: coding style fixesBartosz Golaszewski1-10/+13
pca953x_gpio_set_multiple() has some coding style issues that make it harder to read. Tweak the code a bit. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12gpio: pca953x: remove an unused variableBartosz Golaszewski1-4/+1
The chip_type variable in struct pca953x_chip is no longer required. Remove it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12gpio: pca953x: refactor pca953x_read_regs()Bartosz Golaszewski1-14/+35
Avoid the unnecessary if-else in pca953x_read_regs() by spltting the routine into smaller, specialized functions and calling the right one via a function pointer held in struct pca953x. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12gpio: pca953x: refactor pca953x_write_regs()Bartosz Golaszewski1-28/+47
Avoid the unnecessary if-else in pca953x_write_regs() by splitting the routine into smaller, specialized functions and calling the right one via a function pointer held in struct pca953x_chip. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12gpio: pca953x: code shrinkBartosz Golaszewski1-85/+48
There are multiple places in the driver code where a switch (chip->chip_type) is used to determine the proper register offset. Unduplicate the code by adding a simple structure holding the possible offsets that differ between the pca953x and pca957x chip families and use it to avoid the checks. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12gpio: mxc: add generic gpio request/free callbacks to pinctrlVladimir Zapolskiy1-0/+5
If a GPIO controller description in board DTB contains information about mappings between GPIOs and pads under IOMUX control use it to request and free GPIOs with respect to pinctrl/pinmux subsystems. One of immediate positive functional changes is inability to request non-existing GPIOs, i.e. if there is no pad such. Also pinctrl/pinmux may now properly account pads occupied by requested GPIOs. The change has no effect, if "gpio-ranges" property is not found including the case if a board has no DTB firmware. Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-27 12:30:22 +0000