summaryrefslogtreecommitdiffstats
path: root/drivers/gpio
AgeCommit message (Collapse)AuthorFilesLines
2014-01-23Merge tag 'drivers-for-linus' of ↵Linus Torvalds3-59/+135
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM driver updates from Olof Johansson: "Updates of SoC-near drivers and other driver updates that makes more sense to take through our tree. The largest part of this is a conversion of device registration for some renesas shmobile/sh devices over to use resources. This has required coordination with the corresponding arch/sh changes, and we've agreed to merge the arch/sh changes through our tree. Added in this branch is support for Trusted Foundations secure firmware, which is what is used on many of the commercial Nvidia Tegra products that are in the market, including the Nvidia Shield. The code is local to arch/arm at this time since it's uncertain whether it will be shared with arm64 longer-term, if needed we will refactor later. A couple of new RTC drivers used on ARM boards, merged through our tree on request by the RTC maintainer. ... plus a bunch of smaller updates across the board, gpio conversions for davinci, etc" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits) watchdog: davinci: rename platform driver to davinci-wdt tty: serial: Limit msm_serial_hs driver to platforms that use it mmc: msm_sdcc: Limit driver to platforms that use it usb: phy: msm: Move mach dependent code to platform data clk: versatile: fixup IM-PD1 clock implementation clk: versatile: pass a name to ICST clock provider ARM: integrator: pass parent IRQ to the SIC irqchip: versatile FPGA: support cascaded interrupts from DT gpio: davinci: don't create irq_domain in case of unbanked irqs gpio: davinci: use chained_irq_enter/chained_irq_exit API gpio: davinci: add OF support gpio: davinci: remove unused variable intc_irq_num gpio: davinci: convert to use irqdomain support. gpio: introduce GPIO_DAVINCI kconfig option gpio: davinci: get rid of DAVINCI_N_GPIO gpio: davinci: use {readl|writel}_relaxed() instead of __raw_* serial: sh-sci: Add OF support serial: sh-sci: Add device tree bindings documentation serial: sh-sci: Remove platform data mapbase and irqs fields serial: sh-sci: Remove platform data scbrr_algo_id field ...
2014-01-21Merge tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfdLinus Torvalds3-0/+251
Pull MFD changes from Lee Jones: "New drivers - Samsung Maxim 14577; Micro USB, Regulator, IRQ Controller and Battery Charger - TI/National Semiconductor LP3943 I2C GPIO Expander and PWM Generator Existing driver adaptions - Expansion of Wolfson Arizona DSP and High-Pass filter controls - TI TWL6040 default Regmap support and Regcache addition/bypass - Some nice Smatch catch fixes - Conversion of TI OMAP-USB and TI TWL6030 to endian neutralness - ChromeOS EC timing (delay) adaptions and added dependency on OF - Many constifications of 'struct {mfd_cell,regmap_irq,et.al}' - Watchdog support added for NVIDIA AS3722 - Convert functions to static in TI AM335x - Realigned previously defeated functionality in TI AM335x - IIO ADC-TSC concurrency dead-lock/timeout resolution - Addition of Power Management and Clock support for Samsung core - DEFINE_PCI_DEVICE_TABLE macro removal from MFD Subsystem - Greater use of irqdomain functionality in ST-E AB8500 - Removal of 'include/linux/mfd/abx500/ab8500-gpio.h' - Wolfson WM831x PMIC Power Management changes s/poweroff/shutdown/ - Device Tree documentation added for TI/Nat Semi LP3943 - Version detection and voltage tables for TI TPS6586x PMIC devices - Simplification of Freescale MC13XXX (de-)initialisation routines - Clean-up and simplification of the Realtek parent driver - Added support for RTL8402 Realtek PCI-Express card reader - Resource leak fix for Maxim 77686 - Possible suspend BUG() fix in OMAP USB TLL - Support for new Wolfson WM5110 Revision (D) - Testing of automatic assignment of of_node in mfd_add_device() - Reversion of the above when it started to cause issues - Remove legacy Platform Data from; TI TWL Core, Qualcomm SSBI and ST-E ABx500 Pinctrl - Clean-ups; tabbing issues, function name changes, 'drvdata = NULL' removal, unused uninitialised warning mitigation, error message clarity, removal of redundant/duplicate checks, licensing (GPL -> GPL2), coding consistency, duplicate function declaration, ret checks, commit corrections, redundant of_match_ptr() helper removal, spelling, #if-deffery removal and header guards name changes" * tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd: (78 commits) mfd: wm5110: Add register patch for rev D chip mfd: omap-usb-tll: Don't hold lock during pm_runtime_get/put_sync() gpio: lp3943: Remove redundant of_match_ptr helper mfd: sta2x11-mfd: Use named constants for pci_power_t values Documentation: mfd: Fix LDO index in s2mps11.txt mfd: Cleanup mfd-mcp-sa11x0.h header mfd: max8997: Use "IS_ENABLED(CONFIG_OF)" for DT code. mfd: twl6030: Fix endianness problem in IRQ handler mfd: sec-core: Add cells for S5M8767-clocks mfd: max14577: Remove redundant of_match_ptr helper mfd: twl6040: Fix sparse non static symbol warning mfd: Revert "mfd: Always assign of_node in mfd_add_device()" mfd: rtsx: Fix sparse non static symbol warning mfd: max77693: Set proper maximum register for MUIC regmap mfd: max77686: Fix regmap resource leak on driver remove mfd: Represent correct filenames in file headers mfd: rtsx: Add support for card reader rtl8402 mfd: rtsx: Add set pull control macro and simplify rtl8411 mfd: max8997: Enforce mfd_add_devices() return value check mfd: mc13xxx: Simplify probe() & remove() ...
2014-01-21Merge tag 'gpio-v3.14-1' of ↵Linus Torvalds67-371/+1607
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO tree bulk changes from Linus Walleij: "A big set this merge window, as we have much going on in this subsystem. The changes to other subsystems (notably a slew of ARM machines as I am doing away with their custom APIs) have all been ACKed to the extent possible. Major changes this time: - Some core improvements and cleanups to the new GPIO descriptor API. This seems to be working now so we can start the exodus to this API, moving gradually away from the global GPIO numberspace. - Incremental improvements to the ACPI GPIO core, and move the few GPIO ACPI clients we have to the GPIO descriptor API right *now* before we go any further. We actually managed to contain this *before* we started to litter the kernel with yet another hackish global numberspace for the ACPI GPIOs, which is a big win. - The RFkill GPIO driver and all platforms using it have been migrated to use the GPIO descriptors rather than fixed number assignments. Tegra machine has been migrated as part of this. - New drivers for MOXA ART, Xtensa GPIO32 and SMSC SCH311x. Those should be really good examples of how I expect a nice GPIO driver to look these days. - Do away with custom GPIO implementations on a major part of the ARM machines: ks8695, lpc32xx, mv78xx0. Make a first step towards the same in the horribly convoluted Samsung S3C include forest. We expect to continue to clean this up as we move forward. - Flag GPIO lines used for IRQ on adnp, bcm-kona, em, intel-mid and lynxpoint. This makes the GPIOlib core aware that a certain GPIO line is used for IRQs and can then enforce some semantics such as disallowing a GPIO line marked as in use for IRQ to be switched to output mode. - Drop all use of irq_set_chip_and_handler_name(). The name provided in these cases were just unhelpful tags like "mux" or "demux". - Extend the MCP23s08 driver to handle interrupts. - Minor incremental improvements for rcar, lynxpoint, em 74x164 and msm drivers. - Some non-urgent bug fixes here and there, duplicate #includes and that usual kind of cleanups" Fix up broken Kconfig file manually to make this all compile. * tag 'gpio-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (71 commits) gpio: mcp23s08: fix casting caused build warning gpio: mcp23s08: depend on OF_GPIO gpio: mcp23s08: Add irq functionality for i2c chips ARM: S5P[v210|c100|64x0]: Fix build error gpio: pxa: clamp gpio get value to [0,1] ARM: s3c24xx: explicit dependency on <plat/gpio-cfg.h> ARM: S3C[24|64]xx: move includes back under <mach/> scope Documentation / ACPI: update to GPIO descriptor API gpio / ACPI: get rid of acpi_gpio.h gpio / ACPI: register to ACPI events automatically mmc: sdhci-acpi: convert to use GPIO descriptor API ARM: s3c24xx: fix build error gpio: f7188x: set can_sleep attribute gpio: samsung: Update documentation gpio: samsung: Remove hardware.h inclusion gpio: xtensa: depend on HAVE_XTENSA_GPIO32 gpio: clps711x: Enable driver compilation with COMPILE_TEST gpio: clps711x: Use of_match_ptr() net: rfkill: gpio: convert to descriptor-based GPIO interface leds: s3c24xx: Fix build failure ...
2014-01-21gpio: lp3943: Remove redundant of_match_ptr helperSachin Kamat1-1/+1
'lp3943_gpio_of_match' is always compiled in. Hence the helper macro is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21gpio: add LP3943 I2C GPIO expander driverMilo Kim3-0/+251
This is one of LP3943 MFD driver. LP3943 is configurable as a GPIO expander, up to 16 GPIOs. * Application note: how to configure LP3943 as a GPIO expander http://www.ti.com/lit/an/snva287a/snva287a.pdf * Supported GPIO controller operations request, free, direction_input, direction_output, get and set * GPIO direction register not supported LP3943 doesn't have the GPIO direction register. It only provides input and output status registers. So, private data for the direction should be handled manually. This variable is updated whenever the direction is changed and used in 'get' operation. * Pin assignment A driver data, 'pin_used' is checked when a GPIO is requested. If the GPIO is already assigned, then returns as failure. If the GPIO is available, 'pin_used' is set. When the GPIO is not used anymore, then it is cleared. It is defined as unsigned long type for atomic bit operation APIs, but only LSB 16bits are used because LP3943 has 16 outputs. Signed-off-by: Milo Kim <milo.kim@ti.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-20gpio: mcp23s08: fix casting caused build warningSeongJae Park1-1/+1
Signed-off-by: SeongJae Park <sj38.park@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-20gpio: mcp23s08: depend on OF_GPIOLinus Walleij1-1/+1
The MCP drivers fails to compile on trial builds due to missing Kconfig dependency on OF_GPIO. Fix it. Cc: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-17gpio: mcp23s08: Add irq functionality for i2c chipsLars Poeschel2-5/+244
This adds interrupt functionality for i2c chips to the driver. They can act as a interrupt-controller and generate interrupts, if the inputs change. This is tested with a mcp23017 chip on an arm based platform. v3: - be a bit more clear that the irq functionality is also available on spi versions of the chips, but the linux driver does not support this yet v2: - some more word about irq-mirror property in binding doc - use of_read_bool instead of of_find_property for "interrupt-contrller" and "irq-mirror" - cache the "interrupt-controller" for remove function - do set the irq-mirror bit only if device is marked as interrupt-controller - do create the irq mapping and setup of irq_desc of all possible interrupts in probe path instead of in gpio_to_irq - mark gpios as in use as interrupts in irq in irq_startup and unlock it in irq_shutdown - rename virq to child_irq - remove dev argument from mcp23s08_irq_setup function - move gpiochip_add before mcp23s08_irq_setup in probe path Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-15ARM: S5P[v210|c100|64x0]: Fix build errorSachin Kamat1-0/+3
gpio-samsung.h header file introduced by commit 93177be0910c ("ARM: S3C[24|64]xx: move includes back under <mach/> scope") is required only by S3C[24|64]xx machines. Include them conditionally to avoid the following build errors for other machine configurations. drivers/gpio/gpio-samsung.c:35:31: fatal error: mach/gpio-samsung.h: No such file or directory arch/arm/plat-samsung/pm-gpio.c:22:31: fatal error: mach/gpio-samsung.h: No such file or directory Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-15gpio: pxa: clamp gpio get value to [0,1]Neil Zhang1-1/+2
It would be convenient to normalize the return value for gpio_get. I have checked mach-mmp / mach-pxa / plat-pxa / plat-orion / mach-orion5x. It's OK for all of them to change this function to return 0 and 1. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-14ARM: S3C[24|64]xx: move includes back under <mach/> scopeLinus Walleij1-6/+1
When refactoring and breaking out the includes for the machine-specific GPIO configuration, two files were created in <linux/platform_data/gpio-samsung-s3c[24|64]xx.h>, but as that namespace shall be used for defining data exchanged between machines and drivers, using it for these broad macros and config settings is wrong. Move the headers back into the machine-local <mach/gpio-samsung.h> file and think about the next step. Reported-by: Arnd Bergmann <arnd@arndb.de> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: linux-samsung-soc@vger.kernel.org Acked-by: Mark Brown <broonie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-08gpio / ACPI: get rid of acpi_gpio.hMika Westerberg3-3/+26
Now that all users of acpi_gpio.h have been moved to use either the GPIO descriptor interface or to the internal gpiolib.h we can get rid of acpi_gpio.h entirely. Once this is done the only interface to get GPIOs to drivers enumerated from ACPI namespace is the descriptor based interface. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-08gpio / ACPI: register to ACPI events automaticallyMika Westerberg3-4/+39
Instead of asking each driver to register to ACPI events we can just call acpi_gpiochip_register_interrupts() for each chip that has an ACPI handle. The function checks chip->to_irq and if it is set to NULL (a GPIO driver that doesn't do interrupts) the function does nothing. We also add the a new header drivers/gpio/gpiolib.h that is used for functions internal to gpiolib and add ACPI GPIO chip registering functions to that header. Once that is done we can remove call to acpi_gpiochip_register_interrupts() from its only user, pinctrl-baytrail.c Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-07gpio: f7188x: set can_sleep attributeSimon Guinot1-0/+1
Since request_muxed_region() is used to synchronize access on the Super-I/O controller, then the can_sleep attribute must be set for the f7188x GPIO chips. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-07gpio: samsung: Remove hardware.h inclusionSachin Kamat1-1/+0
The contents of this header file are not referenced in the driver. Remove its inclusion. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-07gpio: xtensa: depend on HAVE_XTENSA_GPIO32Baruch Siach1-0/+1
Prevent build failure when the selected variant does not support GPIO32. Acked-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-07gpio: clps711x: Enable driver compilation with COMPILE_TESTAlexander Shiyan1-1/+1
This helps increasing build testing coverage. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-07gpio: clps711x: Use of_match_ptr()Alexander Shiyan1-2/+2
There is no reason to keep the OF data if the driver was compiled without DT support. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-02gpio: tb10x: Remove redundant of_match_ptr helperSachin Kamat1-1/+1
'tb10x_gpio_dt_ids' is always compiled in. Hence the helper macro is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-02gpio: mvebu: Do not hard code error codeSachin Kamat1-1/+1
Return the appropriate error code instead of hardcoding it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-02gpio: mxc: Do not hard code return valueSachin Kamat1-1/+1
Silences the following warning: why not propagate 'port->irq' from platform_get_irq() instead of (-22)? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-02gpio: max730x: Remove redundant dev_set_drvdataSachin Kamat1-3/+0
Driver core sets it to NULL upon probe failure or release. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-02ARM: S3C24XX: Fix configuration of gpio port sizes on S3C24XX.José Miguel Gonçalves1-3/+3
Some GPIO line limits are incorrectly set which, for instance, does not allow nRTS1 (GPH11) configuration on a S3C2416 chip. Signed-off-by: José Miguel Gonçalves <jose.goncalves@inov.pt> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-26gpio: davinci: don't create irq_domain in case of unbanked irqsGrygorii Strashko1-15/+19
The system may crash if: - there are more than 1 banks - unbanked irqs are enabled - someone will call gpio_to_irq() for GPIO from bank2 or above Hence, fix it by not creating irq_domain if unbanked irqs are enabled and correct gpio_to_irq_banked() to handle this properly. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Sekhar Nori <nsekhar@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-12-26gpio: davinci: use chained_irq_enter/chained_irq_exit APIGrygorii Strashko1-3/+3
It's unsafe to call IRQ chip callbacks (.irq_mask/irq_unmask/irq_ack) from chained IRQ handler directly. Because, Davinci GPIO block is used by different SoCs, which, in turn, have different Main IRQ controllers (Davinci - aintc, cp-intc; Keystone - arm-gic) which may introduce diffrent set of IRQ chip callbacks. As result, call of gpio_irq_handler() on Keysone will simply cause crash the system, because ARM-GIC implements .irq_eoi() instead of .irq_ack(). Hence, fix it by using Kernel chained_irq_enter/chained_irq_exit APIs as they are intended to handle exact such cases. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-12-26gpio: davinci: add OF supportKV Sujith1-3/+54
This patch adds OF parser support for davinci gpio driver and also appropriate documentation in gpio-davinci.txt located at Documentation/devicetree/bindings/gpio/. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: KV Sujith <sujithkv@ti.com> Signed-off-by: Philip Avinash <avinashphilip@ti.com> [prabhakar.csengg@gmail.com: simplified the OF code, removed unnecessary DT property and also simplified the commit message] Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-12-26gpio: davinci: convert to use irqdomain support.Lad, Prabhakar1-33/+47
Convert the davinci gpio driver to use irqdomain support. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> [grygorii.strashko@ti.com: - switch to use one irq-domain per all GPIO banks - keep irq_create_mapping() call in gpio_to_irq_banked() as it simply transformed to irq_find_mapping() if IRQ mapping exist already] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-12-26gpio: introduce GPIO_DAVINCI kconfig optionGrygorii Strashko2-1/+8
The compatible to Davinci GPIO HW block is used by other TI SoCs, like Keystone, where GPIO support is declared as optional. Hence, introduce GPIO_DAVINCI Kconfig option which will allow to enable Davinci GPIO driver for Keystone SoCs when needed. At same time, kept Davinci GPIO driver enabled for Davinci SoCs by default. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-12-26gpio: davinci: get rid of DAVINCI_N_GPIOGrygorii Strashko1-2/+2
Since Davinci GPIO driver is moved to support gpiolib it has to use ARCH_NR_GPIOS (can be configured using CONFIG_ARCH_NR_GPIO Kconfig option) configuration instead of any mach/platform specific options. Hence, replace private DAVINCI_N_GPIO with common ARCH_NR_GPIOS. This is safe because default value for ARCH_NR_GPIOS=256 and maximum number of supported GPIOs for Davinci is DAVINCI_N_GPIO=144. More over, this is one of steps to re-use Davinci GPIO driver by other mach/platform. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-12-26gpio: davinci: use {readl|writel}_relaxed() instead of __raw_*Lad, Prabhakar1-18/+18
This patch replaces the __raw_readl/writel with {readl|writel}_relaxed(), Altough the code runs on ARMv5 based SOCs, changing this will help using code for other use cases (like with big-endian machines). Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-12-24Merge 3.13-rc5 into staging-nextGreg Kroah-Hartman4-7/+19
We want these fixes here to handle some merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-23gpio: sch311x: fix compilation errorLinus Walleij1-0/+1
Compilation failed on some platforms due to implicit inclusion of <linux/io.h>, make this dependency explicit. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-20ARM: s3c64xx: get rid of custom <mach/gpio.h>Linus Walleij1-0/+3
This isolates the custom S3C64xx GPIO definition table to <linux/platform_data/gpio-samsung-s3x64xx.h> as this is used in a few different places in the kernel, removing the need to depend on the implicit inclusion of <mach/gpio.h> from <linux/gpio.h> and thus getting rid of a few nasty cross-dependencies. Also delete the CONFIG_SAMSUNG_GPIO_EXTRA stuff. Instead roof the number of GPIOs for this platform: First sum up all the GPIO banks from A to Q: 187 GPIOs. Add the 16 "board GPIOs" and the roof for SAMSUNG_GPIO_EXTRA, 128, so in total maximum 187+16+128 = 331 GPIOs, so let's take the same roof as for S3C24XX: 512. This way we can do away with the GPIO calculation macros for GPIO_BOARD_START, BOARD_NR_GPIOS and the definition of ARCH_NR_GPIOS. Cc: Mark Brown <broonie@kernel.org> [on Mini6410 board] Tested-by: Tomasz Figa <t.figa@samsung.com> [for changes in mach-s3c64xx] Acked-by: Tomasz Figa <t.figa@samsung.com> Tested-by: Mark Brown <broonie@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-20ARM: s3c24xx: get rid of custom <mach/gpio.h>Linus Walleij1-0/+3
This isolates the custom S3C24xx GPIO definition table to <linux/platform_data/gpio-samsung-s3x24xx.h> as this is used in a few different places in the kernel, removing the need to depend on the implicit inclusion of <mach/gpio.h> from <linux/gpio.h> and thus getting rid of a few nasty cross-dependencies. We also delete the nifty CONFIG_S3C24XX_GPIO_EXTRA stuff. The biggest this can ever be for the S3C24XX is CONFIG_S3C24XX_GPIO_EXTRA = 128, and then for CPU_S3C2443 or CPU_S3C2416 32*12 GPIOs are added, so 32*12+128 = 512 is the absolute roof value on this platform. So we set the size of ARCH_NR_GPIO to this and the GPIOs array will fit any S3C24XX platform, as per pattern from other archs. ChangeLog v2->v3: - Move the movement of the S3C64XX gpio.h file out of this patch and into the follow-up patch where it belongs. ChangeLog v1->v2: - Added an #ifdef ARCH_S3C24XX around the header inclusion in drivers/gpio/gpio-samsung.c as we would otherwise have colliding definitions when compiling S3C64XX. - Rename inclusion guard in the header file. Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: linux-samsung-soc@vger.kernel.org Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-20gpio: sodaville: fix some error return code on error pathWei Yongjun1-2/+6
Fix to return a negative error code from the error handling case instead of 0. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-20gpio: moxart: remove redundant dev_err call in moxart_gpio_probe()Wei Yongjun1-4/+1
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-20gpio: moxart: add missing .owner to struct gpio_chipWei Yongjun1-0/+1
Add missing .owner of struct gpio_chip. This prevents the module from being removed from underneath its users. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-20gpio: add GPIO support for SMSC SCH311xBruno Randolf3-0/+441
This patch adds support for the GPIOs found on the SMSC "Super I/ SCH311x. The chip detection and I/O functions are copied from sch311x_wdt. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-17Merge tag 'gpio-v3.13-4' of ↵Linus Torvalds3-6/+16
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "All but one are long-standing bug fixes that are also tagged for stable - Driver bug fixes for SH PFC, TWL4030, MSM and RCAR. - Update the MAINTAINERS" * tag 'gpio-v3.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: rcar: Fix level interrupt handling gpio: msm: Fix irq mask/unmask by writing bits instead of numbers gpio: twl4030: Fix regression for twl gpio LED output sh-pfc: Fix PINMUX_GPIO macro MAINTAINERS: update GPIO maintainers entry
2013-12-12gpio / ACPI: return -ENOENT when no mapping existsMika Westerberg1-1/+1
Doing this allows drivers to distinguish between a real error case (if there was an error when we tried to resolve the GPIO) and when the optional GPIO line was not available. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-12gpio: rcar: Fix level interrupt handlingValentine Barshak1-1/+2
According to the manual, if a port is set for level detection using the corresponding bit in the edge/level select register and an external level interrupt signal is asserted, the corresponding bit in INTDT does not use the FF to hold the input. Thus, writing 1 to the corresponding bits in INTCLR cannot clear the corresponding bits in the INTDT register. Instead, when an external input signal is stopped, the corresponding bit in INTDT is cleared automatically. Since the INTDT bit cannot be cleared for the level interrupts until the interrupt signal is stopped, we end up with the infinite loop when using deferred (threaded) IRQ handling. Since a deferred interrupt is disabled by the low-level handler and re-enabled only when the deferred handler is completed, Fix the issue by dropping disabled interrupts from the pending mask as suggested by Laurent Pinchart <laurent.pinchart@ideasonboard.com> Changes in V2: * Drop disabled interrupts from pending mask altogether instead of dropping level interrupts one by one once they get handled. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-12gpio: msm: Add module device table and mark table constStephen Boyd1-1/+2
This allows the module to be loaded automatically. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-12gpio: msm: Fix irq mask/unmask by writing bits instead of numbersStephen Boyd1-2/+2
We should be writing bits here but instead we're writing the numbers that correspond to the bits we want to write. Fix it by wrapping the numbers in the BIT() macro. This fixes gpios acting as interrupts. Cc: stable@vger.kernel.org Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-12gpiolib: return -ENOENT if no GPIO mapping existsAlexandre Courbot1-17/+17
Some devices drivers make use of optional GPIO parameters. For such drivers, it is important to discriminate between the case where no GPIO mapping has been defined for the function they are requesting, and the case where a mapping exists but an error occured while resolving it or when acquiring the GPIO. This patch changes the family of gpiod_get() functions such that they will return -ENOENT if and only if no GPIO mapping is defined for the requested function. Other error codes are used when an actual error occured during the GPIO resolution. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-12gpio: driver for Xtensa GPIO32Baruch Siach3-0/+172
GPIO32 is a standard optional extension to the Xtensa architecture core that provides preconfigured output and input ports for intra SoC signaling. The GPIO32 option is implemented as 32bit Tensilica Instruction Extension (TIE) output state called EXPSTATE, and 32bit input wire called IMPWIRE. This driver treats input and output states as two distinct devices. v3: * Use BUG() in xtensa_impwire_set_value() to indicate that it should never be called (Linus Walleij) v2: * Address the comments of Linus Walleij: - Add a few comments - Expand commit log message - Use the BIT() macro for bit offsets - Rewrite CPENABLE handling as static inlines - Use device_initcall() * Depend on !SMP for reason explained in the comments (Marc Gauthier) * Use XCHAL_CP_ID_XTIOP to enable/disable GPIO32 only Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-12gpio: 74x164: Driver cleanupAlexander Shiyan1-27/+16
- Removed excess "spi" field from private data. - Removed excess check for spi_get_drvdata() in remove(). - Removed unneeded message in remove(). - Simplify error path in probe(). - Fixed warnings by scripts/checkfile.pl. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-12gpio: 74x164: Remove non-DT supportAlexander Shiyan2-16/+4
Commit 20bc4d5d565159eb2b942bf4b7fae86fba94e32c (gpio: 74x164: Add support for the daisy-chaining) introduce check for DT for the driver, so driver cannot be used without DT. There are no in-tree users of this driver, so remove non-DT support completely. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-11kernfs: s/sysfs_dirent/kernfs_node/ and rename its friends accordinglyTejun Heo1-2/+2
kernfs has just been separated out from sysfs and we're already in full conflict mode. Nothing can make the situation any worse. Let's take the chance to name things properly. This patch performs the following renames. * s/sysfs_elem_dir/kernfs_elem_dir/ * s/sysfs_elem_symlink/kernfs_elem_symlink/ * s/sysfs_elem_attr/kernfs_elem_file/ * s/sysfs_dirent/kernfs_node/ * s/sd/kn/ in kernfs proper * s/parent_sd/parent/ * s/target_sd/target/ * s/dir_sd/parent/ * s/to_sysfs_dirent()/rb_to_kn()/ * misc renames of local vars when they conflict with the above Because md, mic and gpio dig into sysfs details, this patch ends up modifying them. All are sysfs_dirent renames and trivial. While we can avoid these by introducing a dummy wrapping struct sysfs_dirent around kernfs_node, given the limited usage outside kernfs and sysfs proper, I don't think such workaround is called for. This patch is strictly rename only and doesn't introduce any functional difference. - mic / gpio renames were missing. Spotted by kbuild test robot. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Neil Brown <neilb@suse.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Cc: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-11gpio: tegra: add missing error handling to probeStephen Warren1-1/+6
The call to gpiochip_add() is not currently error-checked. Add the missing checking. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-10gpio: twl4030: Fix regression for twl gpio LED outputRoger Quadros1-3/+12
Commit 0b2aa8be introduced a regression that causes failure in setting LED GPO direction to OUT. This causes USB host probe failures for Beagleboard C4. platform usb_phy_gen_xceiv.2: Driver usb_phy_gen_xceiv requests probe deferral hsusb2_vcc: Failed to request enable GPIO510: -22 reg-fixed-voltage reg-fixed-voltage.0.auto: Failed to register regulator: -22 reg-fixed-voltage: probe of reg-fixed-voltage.0.auto failed with error -22 direction_out/direction_in must return 0 if the operation succeeded. Also, don't update direction flag and output data if twl4030_set_gpio_direction() failed inside twl_direction_out(); Cc: stable@vger.kernel.org Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 16:29:09 +0000