summaryrefslogtreecommitdiffstats
path: root/drivers/gpio/gpio-xilinx.c
AgeCommit message (Collapse)AuthorFilesLines
2019-07-09Merge tag 'gpio-v5.3-1' of ↵Linus Torvalds1-54/+36
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the big slew of GPIO changes for the v5.3 kernel cycle. This is mostly incremental work this time. Three important things: - The FMC subsystem is deleted through my tree. This happens through GPIO as its demise was discussed in relation to a patch decoupling its GPIO implementation from the standard way of handling GPIO. As it turns out, that is not the only subsystem it reimplements and the authors think it is better do scratch it and start over using the proper kernel subsystems than try to polish the rust shiny. See the commit (ACKed by the maintainers) for details. - Arnd made a small devres patch that was ACKed by Greg and goes into the device core. - SPDX header change colissions may happen, because at times I've seen that quite a lot changed during the -rc:s in regards to SPDX. (It is good stuff, tglx has me convinced, and it is worth the occasional pain.) Apart from this is is nothing controversial or problematic. Summary: Core: - When a gpio_chip request GPIOs from itself, it can now fully control the line characteristics, both machine and consumer flags. This makes a lot of sense, but took some time before I figured out that this is how it has to work. - Several smallish documentation fixes. New drivers: - The PCA953x driver now supports the TI TCA9539. - The DaVinci driver now supports the K3 AM654 SoCs. Driver improvements: - Major overhaul and hardening of the OMAP driver by Russell King. - Starting to move some drivers to the new API passing irq_chip along with the gpio_chip when adding the gpio_chip instead of adding it separately. Unrelated: - Delete the FMC subsystem" * tag 'gpio-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits) Revert "gpio: tegra: Clean-up debugfs initialisation" gpiolib: Use spinlock_t instead of struct spinlock gpio: stp-xway: allow compile-testing gpio: stp-xway: get rid of the #include <lantiq_soc.h> dependency gpio: stp-xway: improve module clock error handling gpio: stp-xway: simplify error handling in xway_stp_probe() gpiolib: Clarify use of non-sleeping functions gpiolib: Fix references to gpiod_[gs]et_*value_cansleep() variants gpiolib: Document new gpio_chip.init_valid_mask field Documentation: gpio: Fix reference to gpiod_get_array() gpio: pl061: drop duplicate printing of device name gpio: altera: Pass irqchip when adding gpiochip gpio: siox: Use devm_ managed gpiochip gpio: siox: Add struct device *dev helper variable gpio: siox: Pass irqchip when adding gpiochip drivers: gpio: amd-fch: make resource struct const devres: allow const resource arguments gpio: ath79: Pass irqchip when adding gpiochip gpio: tegra: Clean-up debugfs initialisation gpio: siox: Switch to IRQ_TYPE_NONE ...
2019-06-10gpio: xilinx: convert from OF GPIO to standard devm APIsRobert Hancock1-54/+36
This driver was using the OF GPIO helper API, but barely used any of its features and it cost more code than it saved. Also, the OF GPIO code is now deprecated. Convert it to use a more standard setup and use devm APIs for initialization to avoid the need for a remove function. Our rationale for this change is that we are using the Xilinx GPIO with resources injected using the MFD core rather than on the device tree itself. Using platform rather than OF-specific resources allows this to work for free. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 175Thomas Gleixner1-8/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.665915326@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-10gpio: xilinx: Use the right includeLinus Walleij1-1/+1
This is a GPIO driver so use only <linux/gpio/driver.h>. Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14gpio: Convert to using %pOF instead of full_nameRob Herring1-2/+2
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Tien Hock Loh <thloh@altera.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-08gpio: xilinx: Add support to set multiple GPIO at onceIban Rodriguez1-0/+48
Add function to set multiple GPIO of the same chip at the same time and register it Signed-off-by: Iban Rodriguez <irodriguez@cemitec.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-07gpio: xilinx: Do not use gpiochip_get_data() in xgpio_save_regs()Guenter Roeck1-1/+2
Commit 097d88e94c44 ("gpio: xilinx: use gpiochip data pointer") replaces the use of container_of() with gpiochip_get_data(). Unfortunately, the data pointer is not yet set by the time xgpio_save_regs() is called, causing a system hang. Fixes: 097d88e94c44 ("gpio: xilinx: use gpiochip data pointer") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05gpio: xilinx: use gpiochip data pointerLinus Walleij1-11/+6
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-19gpio: change member .dev to .parentLinus Walleij1-1/+1
The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16gpio/xilinx: Use correct address when setting initial values.Raphaël Teysseyre1-2/+2
xgpio_save_regs() is used in this driver to setup the initial values of the registers in the hardware. The relevant registers at that time are: 0x0 -> channel 0 data (32 bits, one for each GPIO on this channel). 0x4 -> channel 0 tri, controls in/out status for each GPIO of this channel. 0x8 -> channel 1 data 0xC -> channel 1 tri gpio-xilinx.c defines these: XGPIO_DATA_OFFSET (0x0) XGPIO_TRI_OFFSET (0x4) XGPIO_CHANNEL_OFFSET 0x8 Before this patch, the "data" register value of channel 1 was written at 0x4 intead of 0x8 (overwriting the channel 0 "tri" register), and the "tri" register value for channel 1 was written at 0x8 instead of 0xC. Signed-off-by: Raphaël Teysseyre <rteysseyre@gmail.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-12gpio: xilinx: Fix kernel-doc warningsMichal Simek1-1/+3
Fix kernel-doc format: - Add gpio-width description - Remove additional "inited" variable description - Add return value description - xgpio_remove Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-15gpio/xilinx: Use of_mm_gpiochip_removeRicardo Ribalda Delgado1-4/+1
Use the newly created of_mm_gpiochip_remove function for cleaning up of_mm_gpiochip_add Suggested-by: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-15gpio/xilinx: Create a single gpio chip on dual coresRicardo Ribalda Delgado1-108/+109
Currently, we had two gpio chips on cores configured as dual. This lead to mapping the same memory region twice and duplicating the init and remove code. This patch creates a single gpiochip for single and dual cores. Suggested-by: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-15gpio/xilinx: Fix kernel-docRicardo Ribalda Delgado1-16/+21
Some documentation were not following the kernel-doc format. Backporting patch from Xilinx git repository. Suggested-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-15gpio/xilinx: Add support for X86 ArchRicardo Ribalda Delgado1-1/+1
Core can be accessed via PCIe on X86 platform. This patch also allows the driver to be used as module. Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-15gpio/xilinx: Convert the driver to platform device interfaceRicardo Ribalda Delgado1-17/+66
This way we do not need to transverse the device tree manually and we support hot plugged devices. Also Implement remove callback so the driver can be unloaded Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-15gpio/xilinx: Remove offset propertyRicardo Ribalda Delgado1-23/+11
Instead of calculating the register offset per call, pre-calculate it on probe time. Acked-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-24gpio: Fix ngpio in gpio-xilinx driverGernot Vormayr1-12/+15
If one adds gpio-controller; to the chip in the devicetree, then initialization fails with 'gpiochip_find_base: cannot find free range', because ngpio is 0. This patch fixes the bug. This version includes the suggestions from Linus Walleij. Tested on ml507 board. Signed-off-by: Gernot Vormayr <gvormayr@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: xilinx: Make of_device_id array constJingoo Han1-1/+1
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17GPIO: xilinx: Use BIT macroMichal Simek1-6/+6
Use BIT macro from linux/bitops.h. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17GPIO: xilinx: Use __raw_readl/__raw_writel IO functionsMichal Simek1-2/+7
This driver can be used on Xilinx ARM Zynq platform where in_be32/out_be32 functions are not implemented. Use __raw_readl/__raw_writel functions which are implemented on Microblaze and PowerPC. For ARM readl/writel functions are used instead. The correct way how to implement this is to detect endians directly on IP. But for the gpio case without interrupt connected(it means without interrupt logic) there are just 2 registers data and tristate where auto detection can't be done. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17GPIO: xilinx: Add support for dual channelMichal Simek1-12/+91
Supporting the second channel in the driver. Offset is 0x8 and both channnels share the same IRQ. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17GPIO: xilinx: Simplify driver probe functionMichal Simek1-14/+10
Simplification is done by using OF helper function which increase readability of code and remove (if (var) var = be32_to_cpup;) assignment. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-28gpio: remove use of __devinitdataBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devinitdata is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28gpio: remove use of __devinitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2011-12-12gpiolib: output basic details and consolidate gpio device driversGrant Likely1-1/+0
This patch adds a kernel message, containing GPIO range and device name on successful device registration, and removes duplicate messages from the following drivers: * gpio-adp5588 * gpio-bt8xx * gpio-cs5535 * gpio-janz-ttl * gpio-nomadik * gpio-pcf857x * gpio-xilinx * drivers/of/gpio.c Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> [grant.likely@secretlab.ca: squashed 2 patches together] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-31drivers/gpio: Fix drivers who are implicit users of module.hPaul Gortmaker1-0/+1
A pending cleanup will mean that module.h won't be implicitly everywhere anymore. Make sure the modular drivers in gpio are actually calling out for <module.h> explicitly in advance. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-06gpio: reorganize driversGrant Likely1-0/+233
Sort the gpio makefile and enforce the naming convention gpio-*.c for gpio drivers. v2: cleaned up filenames in Kconfig and comment blocks v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 22:20:10 +0000