summaryrefslogtreecommitdiffstats
path: root/drivers/gpio/gpio-mvebu.c
AgeCommit message (Collapse)AuthorFilesLines
2016-11-01gpio/mvebu: Use irq_domain_add_linearJason Gunthorpe1-49/+43
This fixes the irq allocation in this driver to not print: irq: Cannot allocate irq_descs @ IRQ34, assuming pre-allocated irq: Cannot allocate irq_descs @ IRQ66, assuming pre-allocated Which happens because the driver already called irq_alloc_descs() and so the change to use irq_domain_add_simple resulted in calling irq_alloc_descs() twice. Modernize the irq allocation in this driver to use the irq_domain_add_linear flow directly and eliminate the use of irq_domain_add_simple/legacy Fixes: ce931f571b6d ("gpio/mvebu: convert to use irq_domain_add_simple()") Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-31gpio: mvebu: make explicitly non-modularPaul Gortmaker1-3/+2
The Kconfig currently controlling compilation of this code is: drivers/gpio/Kconfig:config GPIO_MVEBU drivers/gpio/Kconfig: def_bool y ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modularity so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-23gpio: mvebu: Use devm_gpiochip_add_data() for gpio registrationLaxman Dewangan1-8/+3
Use devm_gpiochip_add_data() for GPIO registration and clean the error path. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
2016-01-05gpio: mvebu: use gpiochip data pointerLinus Walleij1-15/+8
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-19gpio: change member .dev to .parentLinus Walleij1-1/+1
The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-16gpio: replace trivial implementations of request/free with generic oneJonas Gorski1-12/+2
Replace all trivial request/free callbacks that do nothing but call into pinctrl code with the generic versions. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: James Hogan <james.hogan@imgtec.com> Acked-by: Stefan Agner <stefan@agner.ch> Acked-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner1-1/+1
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-07-14gpio/mvebu: Prepare mvebu_gpio_irq_handler for irq argument removalThomas Gleixner1-1/+1
The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-gpio@vger.kernel.org
2015-07-14gpio: Use irq_desc_get_xxx() to avoid redundant lookup of irq_descJiang Liu1-1/+1
Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc while we already have a pointer to corresponding irq_desc. Preparatory patch for the removal of the 'irq' argument from irq flow handlers. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-14gpio/mvebu: Consolidate chained IRQ handler install/removeThomas Gleixner1-2/+2
Chained irq handlers usually set up handler data as well. We now have a function to set both under irq_desc->lock. Replace the two calls with one. Search and conversion was done with coccinelle: Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-gpio@vger.kernel.org
2015-04-08gpio: mvebu: Fix mask/unmask managment per irq chip typeGregory CLEMENT1-8/+16
Level IRQ handlers and edge IRQ handler are managed by tow different sets of registers. But currently the driver uses the same mask for the both registers. It lead to issues with the following scenario: First, an IRQ is requested on a GPIO to be triggered on front. After, this an other IRQ is requested for a GPIO of the same bank but triggered on level. Then the first one will be also setup to be triggered on level. It leads to an interrupt storm. The different kind of handler are already associated with two different irq chip type. With this patch the driver uses a private mask for each one which solves this issue. It has been tested on an Armada XP based board and on an Armada 375 board. For the both boards, with this patch is applied, there is no such interrupt storm when running the previous scenario. This bug was already fixed but in a different way in the legacy version of this driver by Evgeniy Dushistov: 9ece8839b1277fb9128ff6833411614ab6c88d68 "ARM: orion: Fix for certain sequence of request_irq can cause irq storm". The fact the new version of the gpio drive could be affected had been discussed there: http://thread.gmane.org/gmane.linux.ports.arm.kernel/344670/focus=364012 Reported-by: Evgeniy A. Dushistov <dushistov@mail.ru> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: <stable@vger.kernel.org> # v3.7 + Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-15gpio: mvebu: Fix probe cleanup on errorAndrew Lunn1-6/+17
Ensure that when there is an error during probe that the gpiochip is removed and the generic irq chip is removed. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-15gpio: mvebu: checkpatch fixesAndrew Lunn1-35/+42
Wrap some long lines. Prefer seq_puts() over seq_printf(). space to tab conversions. Spelling error fix. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-11-03gpio: mvebu: add suspend/resume supportThomas Petazzoni1-0/+99
This commit adds the implementation of ->suspend() and ->resume() platform_driver hooks in order to save and restore the state of the GPIO configuration. In order to achieve that, additional fields are added to the mvebu_gpio_chip structure. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-20gpio: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-09gpio: mvebu: Remove initcall-based driver initializationEzequiel Garcia1-6/+1
There's no reason to use an initcall to initialize this driver, and regular module_platform_driver() can be used instead. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: mvebu: Make of_device_id array constJingoo Han1-1/+1
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: mvebu: remove unnecessary OOM messagesJingoo Han1-3/+1
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-12gpio: mvebu: use chained_irq_{enter,exit} for GIC compatibilityThomas Petazzoni1-0/+7
On currently supported SoCs, the GPIO block used on Marvell EBU SoCs is always connected to the Marvell MPIC. However, we are going to introduce the support for newer Marvell EBU SoCs that use the Cortex-A9 core, and therefore use the GIC as their main interrupt controller, to which the GPIO block controlled by the gpio-mvebu driver is connected. The GIC interrupt controller driver uses the fasteoi flow handler. In order to ensure that the eoi hook of the GIC driver gets called, the GPIO driver should call chained_irq_enter() and chained_irq_exit() in its handler. Without this, the first GPIO interrupt locks up the system because it doesn't get acked at the GIC level. This change is similar to for example commit 0d978eb7349941139241a99acf05de6dd49b78d1 ("gpio: davinci: use chained_irq_enter/chained_irq_exit API"). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-02gpio: mvebu: Do not hard code error codeSachin Kamat1-1/+1
Return the appropriate error code instead of hardcoding it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-09Merge tag 'v3.13-rc3' into develLinus Walleij1-1/+1
Linux 3.13-rc3
2013-12-04gpio/pinctrl: make gpio_chip members typed booleanLinus Walleij1-1/+1
This switches the two members of struct gpio_chip that were defined as unsigned foo:1 to bool, because that is indeed what they are. Switch all users in the gpio and pinctrl subsystems to assign these values with true/false instead of 0/1. The users outside these subsystems will survive since true/false is 1/0, atleast we set some kind of more strict typing example. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-25gpio: mvebu: make mvchip->irqbase signed for error handlingDan Carpenter1-1/+1
There is a bug in mvebu_gpio_probe() where we do: mvchip->irqbase = irq_alloc_descs(-1, 0, ngpios, -1); if (mvchip->irqbase < 0) { The problem is that mvchip->irqbase is unsigned so the error handling doesn't work. I have changed it to be a regular int. Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-16drivers/gpio: simplify use of devm_ioremap_resourceJulia Lawall1-6/+1
Remove unneeded error handling on the result of a call to platform_get_resource when the value is passed to devm_ioremap_resource. Move the call to platform_get_resource adjacent to the call to devm_ioremap_resource to make the connection between them more clear. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression pdev,res,n,e,e1; expression ret != 0; identifier l; @@ - res = platform_get_resource(pdev, IORESOURCE_MEM, n); ... when != res - if (res == NULL) { ... \(goto l;\|return ret;\) } ... when != res + res = platform_get_resource(pdev, IORESOURCE_MEM, n); e = devm_ioremap_resource(e1, res); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-25gpio: mvebu: Use irq_get_trigger_type() to get IRQ flagsJavier Martinez Canillas1-1/+1
Use irq_get_trigger_type() to get the IRQ trigger type flags instead calling irqd_get_trigger_type(irq_get_irq_data(irq)) Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@linux-mips.org Link: http://lkml.kernel.org/r/1371228049-27080-3-git-send-email-javier.martinez@collabora.co.uk Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-05-18drivers/gpio: don't check resource with devm_ioremap_resourceWolfram Sang1-5/+0
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Stephen Warren <swarren@nvidia.com>
2013-05-06Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds1-13/+72
Pull GPIO changes from Grant Likely: "The usual selection of bug fixes and driver updates for GPIO. Nothing really stands out except the addition of the GRGPIO driver and some enhacements to ACPI support" I'm pulling this despite the earlier mess. Let's hope it compiles these days. * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: (46 commits) gpio: grgpio: Add irq support gpio: grgpio: Add device driver for GRGPIO cores gpiolib-acpi: introduce acpi_get_gpio_by_index() helper GPIO: gpio-generic: remove kfree() from bgpio_remove call gpio / ACPI: Handle ACPI events in accordance with the spec gpio: lpc32xx: Fix off-by-one valid range checking for bank gpio: mcp23s08: convert driver to DT gpio/omap: force restore if context loss is not detectable gpio/omap: optimise interrupt service routine gpio/omap: remove extra context restores in *_runtime_resume() gpio/omap: free irq domain in probe() failure paths gpio: gpio-generic: Add 16 and 32 bit big endian byte order support gpio: samsung: Add terminating entry for exynos_pinctrl_ids gpio: mvebu: add dbg_show function MAX7301 GPIO: Do not force SPI speed when using OF Platform gpio: gpio-tps65910.c: fix checkpatch error gpio: gpio-timberdale.c: fix checkpatch error gpio: gpio-tc3589x.c: fix checkpatch errors gpio: gpio-stp-xway.c: fix checkpatch error gpio: gpio-sch.c: fix checkpatch error ...
2013-03-27gpio: mvebu: add dbg_show functionSimon Guinot1-0/+59
This patch adds a dedicated dbg_show function to the gpio-mvebu driver. In addition to the generic gpiolib informations, this function displays informations related with the specific Marvell registers (blink enable, data in polarity, interrupt masks and cause). Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio: gpio-mvebu.c: fix checkpatch errorsLaurent Navet1-13/+13
Fix : gpio/gpio-mvebu.c:120: ERROR: space required before the open parenthesis '(' gpio/gpio-mvebu.c:136: ERROR: space required before the open parenthesis '(' gpio/gpio-mvebu.c:154: ERROR: space required before the open parenthesis '(' gpio/gpio-mvebu.c:404: ERROR: space required before the open parenthesis '(' gpio/gpio-mvebu.c:476: ERROR: "(foo*)" should be "(foo *)" gpio/gpio-mvebu.c:480: ERROR: "(foo*)" should be "(foo *)" gpio/gpio-mvebu.c:484: ERROR: "(foo*)" should be "(foo *)" gpio/gpio-mvebu.c:512: ERROR: space prohibited after that '!' (ctx:BxW) gpio/gpio-mvebu.c:518: ERROR: space prohibited after that '!' (ctx:BxW) gpio/gpio-mvebu.c:518: ERROR: space required before the open brace '{' gpio/gpio-mvebu.c:563: ERROR: space prohibited after that '!' (ctx:BxW) gpio/gpio-mvebu.c:570: ERROR: trailing whitespace gpio/gpio-mvebu.c:577: ERROR: space required before the open parenthesis '(' gpio/gpio-mvebu.c:635: ERROR: space prohibited after that '!' (ctx:BxW) Signed-off-by: Laurent Navet <laurent.navet@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-08gpio: mvebu: Add clk support to prevent lockupAndrew Lunn1-0/+7
The kirkwood SoC GPIO cores use the runit clock. Add code to clk_prepare_enable() runit, otherwise there is a danger of locking up the SoC by accessing the GPIO registers when runit clock is not ticking. Reported-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-25Merge 3.8-rc5 into driver-core-nextGreg Kroah-Hartman1-10/+2
This resolves a gpio driver merge issue pointed out in linux-next. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22gpio: Convert to devm_ioremap_resource()Thierry Reding1-8/+8
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17gpio: mvebu: Don't free chip label memoryThierry Reding1-6/+0
The gpio_chip.label field is a const char * and assigned the value of a call to dev_name(). Memory obtained from dev_name() should not be freed by drivers. Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-12-19gpio/mvebu-gpio: Make mvebu-gpio depend on OF_CONFIGGregory CLEMENT1-17/+0
When building without device tree support (for the mv78x00 SoCs for example), the build failed because of_irq_count is undeclared. However mvebu-gpio is not designed to build without device tree support. So make it depends on OF_CONFIG, remove the #ifdef OF_CONFIG line and the platform_device_id. Tested on RD-78x00-mASA, DB-78460-BP, DB-88F6710-BP-DDR3, DB-MV784MP-GP, Mirabox and OpenBlocks AX3. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-11Merge tag 'driver-core-3.8-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg Kroah-Hartman: "Here's the large driver core updates for 3.8-rc1. The biggest thing here is the various __dev* marking removals. This is going to be a pain for the merge with different subsystem trees, I know, but all of the patches included here have been ACKed by their various subsystem maintainers, as they wanted them to go through here. If this is too much of a pain, I can pull all of them out of this tree and just send you one with the other fixes/updates and then, after 3.8-rc1 is out, do the rest of the removals to ensure we catch them all, it's up to you. The merges should all be trivial, and Stephen has been doing them all in linux-next for a few weeks now quite easily. Other than the __dev* marking removals, there's nothing major here, some firmware loading updates and other minor things in the driver core. All of these have (much to Stephen's annoyance), been in linux-next for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fixed up trivial conflicts in drivers/gpio/gpio-{em,stmpe}.c due to gpio update. * tag 'driver-core-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (93 commits) modpost.c: Stop checking __dev* section mismatches init.h: Remove __dev* sections from the kernel acpi: remove use of __devinit PCI: Remove __dev* markings PCI: Always build setup-bus when PCI is enabled PCI: Move pci_uevent into pci-driver.c PCI: Remove CONFIG_HOTPLUG ifdefs unicore32/PCI: Remove CONFIG_HOTPLUG ifdefs sh/PCI: Remove CONFIG_HOTPLUG ifdefs powerpc/PCI: Remove CONFIG_HOTPLUG ifdefs mips/PCI: Remove CONFIG_HOTPLUG ifdefs microblaze/PCI: Remove CONFIG_HOTPLUG ifdefs dma: remove use of __devinit dma: remove use of __devexit_p firewire: remove use of __devinitdata firewire: remove use of __devinit leds: remove use of __devexit leds: remove use of __devinit leds: remove use of __devexit_p mmc: remove use of __devexit ...
2012-12-11Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-4/+5
Pull GPIO updates from Grant Likely: "GPIO follow up patch and type change for v3.5 merge window Primarily device driver additions, features and bug fixes. Not much touching gpio common subsystem support. Should not be scary." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: (34 commits) gpio: Provide the STMPE GPIO driver with its own IRQ Domain gpio: add TS-5500 DIO blocks support gpio: pcf857x: use client->irq for gpio_to_irq() gpio: stmpe: Add DT support for stmpe gpio gpio: pl061 depends on ARM gpio/pl061: remove old comment gpio: SPEAr: add spi chipselect control driver gpio: gpio-max710x: Support device tree probing gpio: twl4030: Use only TWL4030_MODULE_LED for LED configuration gpio: tegra: read output value when gpio is set in direction_out gpio: pca953x: Add compatible strings to gpio-pca953x driver gpio: pca953x: Register an IRQ domain gpio: mvebu: Set free callback for gpio_chip gpio: tegra: Drop exporting static functions gpio: tegra: Staticize non-exported symbols gpio: tegra: fix suspend/resume apis gpio-pch: Set parent dev for gpio chip gpio: em: Fix build errors GPIO: clps711x: use platform_device_unregister in gpio_clps711x_init() gpio/tc3589x: convert to use the simple irqdomain ...
2012-11-28gpio: remove use of __devinitdataBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devinitdata is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28gpio: remove use of __devinitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17mvebu-gpio: Disable blinking when enabling a GPIO for outputJamie Lentin1-0/+23
The plat-orion GPIO driver would disable any pin blinking whenever using a pin for output. Do the same here, as a blinking LED will continue to blink regardless of what the GPIO pin level is. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-08gpio: mvebu: Set free callback for gpio_chipAxel Lin1-2/+3
We call pinctrl_request_gpio() in request callback, thus we need to call pinctrl_free_gpio() in free callback. Both mvebu_gpio_request() and mvebu_gpio_free() are not referenced outside of this file, make them static. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-30Merge tag 'gpio-fixes-v3.7-rc4' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: - Fix a potential bit wrap issue in the Timberdale driver - Fix up the buffer allocation size in the 74x164 driver - Set the value in direction_output() right in the mvebu driver - Return proper error codes for invalid GPIOs - Fix an off-mode bug for the OMAP - Don't initialize the mask_cach on the mvebu driver * tag 'gpio-fixes-v3.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: GPIO: mvebu-gpio: Don't initialize the mask_cache gpio/omap: fix off-mode bug: clear debounce settings on free/reset gpiolib: Don't return -EPROBE_DEFER to sysfs, or for invalid gpios gpio: mvebu: correctly set the value in direction_output() gpio-74x164: Fix buffer allocation size gpio-timberdale: fix a potential wrapping issue
2012-10-30GPIO: mvebu-gpio: Don't initialize the mask_cacheAndrew Lunn1-1/+1
Due to the SMP nature of some of the chips, which have per CPU registers, the driver does not use the generic irq_gc_mask_set_bit() & irq_gc_mask_clr_bit() functions, which only support a single register. The driver has its own implementation of these functions, which can pick the correct register depending on the CPU being used. The functions do however use the gc->mask_cache value. The call to irq_setup_generic_chip() was passing IRQ_GC_INIT_MASK_CACHE, which caused the gc->mask_cache to be initialized to the contents of some random register. This resulted in unexpected interrupts been delivered from random GPIO lines. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-26gpio/mvebu: convert to use irq_domain_add_simple()Linus Walleij1-2/+2
The MVEBU driver probably just wants a few IRQs. Using the simple domain has the upside of allocating IRQ descriptors if need be, especially in a SPARSE_IRQ environment. Cc: Rob Herring <rob.herring@calxeda.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-24gpio: mvebu: correctly set the value in direction_output()Thomas Petazzoni1-0/+2
The ->direction_output() operation of gpio_chip is supposed to set the direction to output but also to set the GPIO to an initial value. Unfortunately, this last part was not done until now, causing for example the LEDs to not be properly set to their default initial value. This patch fixes this by calling the mvebu_gpio_set() function from mvebu_gpio_direction_output() before configuring the GPIO as an output GPIO. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-17gpio: mvebu: Add missing breaks in mvebu_gpio_irq_set_typeAxel Lin1-0/+3
Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-09-22gpio: introduce gpio-mvebu driver for Marvell SoCsThomas Petazzoni1-0/+679
This driver aims at replacing the arch/arm/plat-orion/gpio.c driver, and is designed to be compatible with all Marvell EBU SoCs: Orion, Kirkwood, Dove, Armada 370/XP and Discovery. It has been successfully tested on Dove and Armada XP at the moment. Compared to the plat-orion driver, this new driver has the following added benefits: *) Support for Armada 370 and Armada XP *) It is integrated with the mvebu pinctrl driver so that GPIO pins are properly muxed, and the GPIO driver knows which GPIO pins are output-only or input-only. *) Properly placed in drivers/gpio *) More extensible mechanism to support platform differences. The plat-orion driver uses a simple mask-offset DT property, which works fine for Discovery MV78200 but not for Armada XP. The new driver uses different compatible strings to identify the different variants of the GPIO controllers. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Gregory Clement <gregory.clement@free-electrons.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-04 03:23:38 +0000