summaryrefslogtreecommitdiffstats
path: root/drivers/fpga
AgeCommit message (Collapse)AuthorFilesLines
2018-03-14PCI: Add Altera vendor IDJohannes Thumshirn1-2/+0
Add the Altera PCI Vendor id to pci_ids.h and remove the private definitions from xillybus_pcie.c and altera-cvp.c. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Eli Billauer <eli.billauer@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Acked-by: Eli Billauer <eli.billauer@gmail.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-18fpga: socfpga-a10: disable clk on error in socfpga_a10_fpga_probe()Alexey Khoroshilov1-1/+7
If fpga_mgr_register() fails, a clock is left undisabled. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28fpga: region: release of_parse_phandle nodes after useIan Abbott1-3/+10
Both fpga_region_get_manager() and fpga_region_get_bridges() call of_parse_phandle(), but nothing calls of_node_put() on the returned struct device_node pointers. Make sure to do that to stop their reference counters getting out of whack. Fixes: 0fa20cdfcc1f ("fpga: fpga-region: device tree control for FPGA") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28fpga: fpga-bridge: remove unnecessary null check in of_fpga_bridge_getGustavo A. R. Silva1-2/+0
Notice that bridge = to_fpga_bridge(dev); expands to: bridge = container_of(dev, struct fpga_bridge, dev); and container_of is never null, so this null check is unnecessary. Addresses-Coverity-ID: 1397912 Reported-by: Alan Tull <atull@kernel.org> Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28fpga: fpga-mgr: remove unnecessary code in __fpga_mgr_getGustavo A. R. Silva1-2/+0
Notice that mgr = to_fpga_manager(dev); expands to: mgr = container_of(dev, struct fpga_manager, dev); and container_of is never null, so this null check is unnecessary. Addresses-Coverity-ID: 1397916 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28fpga: add attribute groupsAlan Tull3-0/+3
Make it easy to add attributes to low level FPGA drivers the right way. Add attribute groups pointers to structures that are used when registering a manager, bridge, or group. When the low level driver registers, set the device attribute group. The attributes are created in device_add. Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28fpga: clean up fpga KconfigAlan Tull1-54/+54
The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28fpga: of-fpga-region: accept overlays that don't program FPGAAlan Tull1-5/+6
The FPGA may already have a static image programmed when Linux boots. In that case a DT overlay may be used to add the devices that already exist. This commit allows that by shuffling the order of some checks. Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28fpga: region: move device tree support to of-fpga-region.cAlan Tull4-455/+509
Create of-fpga-region.c and move the following functions without modification from fpga-region.c. * of_fpga_region_find * of_fpga_region_get_mgr * of_fpga_region_get_bridges * child_regions_with_firmware * of_fpga_region_parse_ov * of_fpga_region_notify_pre_apply * of_fpga_region_notify_post_remove * of_fpga_region_notify * of_fpga_region_probe * of_fpga_region_remove Create two new functions with some code from fpga_region_init/exit. * of_fpga_region_init * of_fpga_region_exit Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28fpga: region: add fpga_region_class_findAlan Tull1-8/+15
Add a function for searching the fpga-region class. This will be useful when device tree code is no longer in the same file that declares the fpga-region class. Another step in separating common FPGA region code from device tree support. Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28fpga: region: add register/unregister functionsAlan Tull1-40/+65
Another step in separating common code from device tree specific code for FPGA regions. * add FPGA region register/unregister functions. * add the register/unregister functions to the header * use devm_kzalloc to alloc the region. * add a method for getting bridges to the region struct * add priv to the region struct * use region->info in of_fpga_region_get_bridges Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28fpga: region: rename some functions prior to movingAlan Tull1-29/+31
Rename some functions that will be moved to of-fpga-region.c. Also change some parameters and export a function to help with refactoring. This is a step towards the larger goal of separating device tree support from FPGA region common code. * fpga_region_get_manager -> of_fpga_region_get_mgr * add 'of_' prefix to the following: * fpga_region_find * fpga_region_get_bridges * fpga_region_notify_pre_apply * fpga_region_notify_post_remove), * fpga_region_probe/remove Parameter changes: * of_fpga_region_find change parameter to be the device node of the region. * of_fpga_region_get_bridges change second parameter to FPGA image info. Export of_fpga_region_find as well. Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28fpga: region: add fpga-region.h headerAlan Tull1-20/+4
* Create fpga-region.h. * Export fpga_region_program_fpga. * Move struct fpga_region and other things to the header. This is a step in separating FPGA region common code from Device Tree support. Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28fpga: region: separate out code that parses the overlayAlan Tull1-49/+73
New function of_fpga_region_parse_ov added, moving code from fpga_region_notify_pre_apply. This function gets the FPGA image info from the overlay and is able to simplify some of the logic involved. This is a baby step in refactoring the FPGA region code to separate out common code from Device Tree overlay support. Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28fpga: region: use image info as parameter for programming regionAlan Tull1-7/+9
Use FPGA image info (region->info) when region code is programming the FPGA to pass in multiple parameters. This is a baby step in refactoring the FPGA region code to separate out common FPGA region code from FPGA region Device Tree overlay support. Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28fpga: region: fix slow warning with more than one overlayAlan Tull1-0/+5
When DT overlays are applied, each FPGA region keeps track of the fpga image info as region->info. This pointer is assigned only if an overlay causes the FPGA to be programmed. As it stands, this pointer can be overwritten, causing a slow warning later when overlays are removed. This patch fixes this by changing the allowed behaviour. If a region has received an overlay that programmed the FPGA, reject other overlays that try to program the FPGA. To reprogram the FPGA, first remove the overlay. This makes sense as removing the overlay also removes the devices cleanly. Note that overlays that make DT changes without reprogramming the FPGA are exempt from this restriction. Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28fpga: region: check for child regions before allocing image infoAlan Tull1-5/+9
During a device tree overlay pre-apply notification, the check for child FPGA regions can happen slightly earlier. This saves us from allocating the FPGA image info that just gets thrown away. This is a baby step in refactoring the FPGA region code to separate out common FPGA region code from FPGA region Device Tree overlay support. Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28fpga: region: get mgr early onAlan Tull1-22/+23
Get the FPGA manager during region creation. This is a baby step in refactoring the FPGA region code to separate out common FPGA region code from FPGA region Device Tree overlay support. Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28fpga: region: remove unneeded of_node_get and putAlan Tull1-3/+0
Remove of_node_get/put in fpga_region_get/put. Not needed and will get in the way when I separate out the common FPGA region code from Device Tree support code. Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28fpga: region: use dev_err instead of pr_errAlan Tull1-10/+10
Use dev_err messages instead of pr_err. Also s/&region->dev/dev/ in two places where we already have dev = &region->dev. Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28fpga: mgr: separate getting/locking FPGA managerAlan Tull2-18/+48
Previously when the user gets a FPGA manager, it was locked and nobody else could use it for programming. This commit makes it straightforward to save a reference to an FPGA manager and only lock it when programming the FPGA. Add functions that get an FPGA manager's mutex for exclusive use: * fpga_mgr_lock * fpga_mgr_unlock The following functions no longer lock an FPGA manager's mutex: * of_fpga_mgr_get * fpga_mgr_get * fpga_mgr_put Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28fpga: mgr: API change to replace fpga load functions with single functionAlan Tull2-26/+85
fpga-mgr has three methods for programming FPGAs, depending on whether the image is in a scatter gather list, a contiguous buffer, or a firmware file. This makes it difficult to write upper layers as the caller has to assume whether the FPGA image is in a sg table, as a single buffer, or a firmware file. This commit moves these parameters to struct fpga_image_info and adds a single function for programming fpgas. New functions: * fpga_mgr_load - given fpga manager and struct fpga_image_info, program the fpga. * fpga_image_info_alloc - alloc a struct fpga_image_info. * fpga_image_info_free - free a struct fpga_image_info. These three functions are unexported: * fpga_mgr_buf_load_sg * fpga_mgr_buf_load * fpga_mgr_firmware_load Also use devm_kstrdup to copy firmware_name so we aren't making assumptions about where it comes from when allocing/freeing the struct fpga_image_info. API documentation has been updated and a new document for FPGA region has been added. Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28fpga: bridge: support getting bridge from deviceAlan Tull2-27/+94
Add two functions for getting the FPGA bridge from the device rather than device tree node. This is to enable writing code that will support using FPGA bridges without device tree. Rename one old function to make it clear that it is device tree-ish. This leaves us with 3 functions for getting a bridge: * fpga_bridge_get Get the bridge given the device. * fpga_bridges_get_to_list Given the device, get the bridge and add it to a list. * of_fpga_bridges_get_to_list Renamed from priviously existing fpga_bridges_get_to_list. Given the device node, get the bridge and add it to a list. Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-16Merge tag 'char-misc-4.15-rc1' of ↵Linus Torvalds1-1/+1
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the big set of char/misc and other driver subsystem patches for 4.15-rc1. There are small changes all over here, hyperv driver updates, pcmcia driver updates, w1 driver updats, vme driver updates, nvmem driver updates, and lots of other little one-off driver updates as well. The shortlog has the full details. All of these have been in linux-next for quite a while with no reported issues" * tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits) VME: Return -EBUSY when DMA list in use w1: keep balance of mutex locks and refcnts MAINTAINERS: Update VME subsystem tree. nvmem: sunxi-sid: add support for A64/H5's SID controller nvmem: imx-ocotp: Update module description nvmem: imx-ocotp: Enable i.MX7D OTP write support nvmem: imx-ocotp: Add i.MX7D timing write clock setup support nvmem: imx-ocotp: Move i.MX6 write clock setup to dedicated function nvmem: imx-ocotp: Add support for banked OTP addressing nvmem: imx-ocotp: Pass parameters via a struct nvmem: imx-ocotp: Restrict OTP write to IMX6 processors nvmem: uniphier: add UniPhier eFuse driver dt-bindings: nvmem: add description for UniPhier eFuse nvmem: set nvmem->owner to nvmem->dev->driver->owner if unset nvmem: qfprom: fix different address space warnings of sparse nvmem: mtk-efuse: fix different address space warnings of sparse nvmem: mtk-efuse: use stack for nvmem_config instead of malloc'ing it nvmem: imx-iim: use stack for nvmem_config instead of malloc'ing it thunderbolt: tb: fix use after free in tb_activate_pcie_devices MAINTAINERS: Add git tree for Thunderbolt development ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-16Merge 4.14-rc5 into char-misc-nextGreg Kroah-Hartman1-3/+3
We need the fixes in here to resolve merge issues and for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-04fpga: make xlnx_pr_decoupler_br_ops constBhumika Goyal1-1/+1
Make this const as it is only passed to a const argument of the function fpga_bridge_register. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-19fpga: altera-cvp: remove DRIVER_ATTR() usageGreg Kroah-Hartman1-3/+3
It's better to be explicit and use the DRIVER_ATTR_RW() macro when defining a driver's sysfs file. This is part of a series to drop DRIVER_ATTR() from the tree entirely. Cc: linux-fpga@vger.kernel.org Reviewed-by: Moritz Fischer <mdf@kernel.org> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-10fpga: altera-hps2fpga: fix multiple init of l3_remap_lockIan Abbott1-3/+1
The global spinlock `l3_remap_lock` is reinitialized every time the "probe" function `alt_fpga_bridge_probe()` is called. It should only be initialized once. Use `DEFINE_SPINLOCK()` to initialize it statically. Fixes: e5f8efa5c8bf ("ARM: socfpga: fpga bridge driver support") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-By: Moritz Fischer <mdf@kernel.org> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-10fpga: altera-hps2fpga: add NULL check on of_match_device() return valueGustavo A. R. Silva1-0/+5
Check return value from call to of_match_device() in order to prevent a NULL pointer dereference. In case of NULL print error message and return -ENODEV Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-10ARM: socfpga: explicitly request exclusive reset controlPhilipp Zabel1-1/+2
Commit a53e35db70d1 ("reset: Ensure drivers are explicit when requesting reset lines") started to transition the reset control request API calls to explicitly state whether the driver needs exclusive or shared reset control behavior. Convert all drivers requesting exclusive resets to the explicit API call so the temporary transition helpers can be removed. No functional changes. Cc: Alan Tull <atull@kernel.org> Cc: Moritz Fischer <moritz.fischer@ettus.com> Cc: linux-fpga@vger.kernel.org Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-By: Moritz Fischer <mdf@kernel.org> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-10fpga: Convert to using %pOF instead of full_nameRob Herring1-2/+2
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Alan Tull <atull@kernel.org> Cc: Moritz Fischer <moritz.fischer@ettus.com> Cc: linux-fpga@vger.kernel.org Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17fpga manager: Add Altera CvP driverAnatolij Gustschin3-0/+508
Add FPGA manager driver for loading Arria-V/Cyclone-V/Stratix-V and Arria-10 FPGAs via CvP. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17fpga-manager: altera-ps-spi: use bitrev8x4Joshua Clayton1-4/+15
Speed up bit reversal by using hardware bit reversal Add extra code to handle less than 4byte remnants, if any Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17fpga manager: Add altera-ps-spi driver for Altera FPGAsJoshua Clayton3-0/+305
altera-ps-spi loads FPGA firmware over SPI, using the "passive serial" interface on Altera Arria 10, Cyclone V or Stratix V FPGAs. This is one of the simpler ways to set up an FPGA at runtime. The signal interface is close to unidirectional SPI with lsb first. Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17Make FPGA a menuconfig to ease disabling it allVincent Legoll1-5/+1
No need to get into the submenu to disable all FPGA-related config entries Signed-off-by: Vincent Legoll <vincent.legoll@gmail.com> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-26fpga fr br: update supported version numbersMatthew Gerlach1-11/+19
The value in the version register of the altera freeze bridge controller changed from the beta value of 2 to the value of 0xad000003 in the official release of the IP. This patch supports the old and new version numbers, and the driver's probe function will fail if neither of the supported versions is found. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Reviewed-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-26fpga: region: release FPGA region reference in error pathTobias Klauser1-1/+3
If fpga_region_get_manager() fails in fpga_region_program_fpga(), a reference to the fpga_manager instance previously acquired through fpga_region_get() is retained. Make sure to properly release it in the error case by using a separate jump label which will call fpga_region_put() in before returning. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-26fpga altera-hps2fpga: disable/unprepare clock on error in ↵Tobias Klauser1-6/+9
alt_fpga_bridge_probe() If either _alt_hps2fpga_enable_set() or fpga_bridge_register() fail in alt_fpga_bridge_probe(), the clock remains enabled and prepared. Also, in the error path for _alt_hps2fpga_enable_set() a call to fpga_bridge_unregister() is made even though the bridge was not registered yet. Remove the unnecessary call to fpga_bridge_unregister() and call clk_disable_unprepare() in both error paths in order to make sure the clock gets properly disabled and unprepared. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08fpga: Add support for Xilinx LogiCORE PR DecouplerMoritz Fischer3-0/+172
This adds support for the Xilinx LogiCORE PR Decoupler soft-ip that does decoupling of PR regions in the FPGA fabric during partial reconfiguration. Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08fpga pr ip: Platform driver for Altera Partial Reconfiguration IP.Matthew Gerlach3-0/+76
This adds a platform bus driver for a fpga-mgr driver that uses the Altera Partial Reconfiguration IP component. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08fpga pr ip: Core driver support for Altera Partial Reconfiguration IP.Matthew Gerlach3-0/+226
Adding the core functions necessary for a fpga-mgr driver for the Altera Partial IP component. It is intended for these functions to be used by the various bus implementations like the platform bus or the PCIe bus. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08fpga: add config complete timeoutAlan Tull1-0/+3
Adding timeout for maximum allowed time for FPGA to go to operating mode after a FPGA region has been programmed. Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08fpga manager: Add Xilinx slave serial SPI driverAnatolij Gustschin3-0/+206
The driver loads FPGA firmware over SPI, using the "slave serial" configuration interface on Xilinx FPGAs. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Moritz Fischer <mdf@kernel.org> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08fpga: altera_freeze_bridge: Constify opsMoritz Fischer1-1/+1
The ops are not changing, make them const. Signed-off-by: Moritz Fischer <mdf@kernel.org> Cc: Alan Tull <atull@kernel.org> Cc: linux-kernel@vger.kernel.org Cc: linux-fpga@vger.kernel.org Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17fpga: bridge: Replace open-coded list_for_each + list_entryMoritz Fischer1-11/+4
Replaces open-coded list_for_each() + list_entry() with macro list_for_each_entry() Signed-off-by: Moritz Fischer <mdf@kernel.org> Cc: linux-fpga@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17fpga: Add support for Lattice iCE40 FPGAsJoel Holdsworth3-0/+214
This patch adds support to the FPGA manager for configuring the SRAM of iCE40LM, iCE40LP, iCE40HX, iCE40 Ultra, iCE40 UltraLite and iCE40 UltraPlus devices, through slave SPI. Signed-off-by: Joel Holdsworth <joel@airwebreathe.org.uk> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com> Acked-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17FPGA: Add TS-7300 FPGA managerFlorian Fainelli3-0/+164
Add support for loading bitstreams on the Altera Cyclone II FPGA populated on the TS-7300 board. This is done through the configuration and data registers offered through a memory interface between the EP93xx SoC and the FPGA via an intermediate CPLD device. The EP93xx SoC on the TS-7300 does not have direct means of configuring the on-board FPGA other than by using the special memory mapped interface to the CPLD. No other entity on the system can control the FPGA bitstream. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Alan Tull <atull@opensource.altera.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17fpga: region: Add fpga-region property 'encrypted-fpga-config'Moritz Fischer1-2/+6
Add fpga-region property to allow passing the fact that the bitstream is encrypted to the fpga-region and ultimately to the low-level driver. Signed-off-by: Moritz Fischer <mdf@kernel.org> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17fpga: zynq: Add support for encrypted bitstreamsMoritz Fischer1-3/+25
Add support for encrypted bitstreams. For this to work the system must be booted in secure mode. In order for on-the-fly decryption to work, the PCAP clock rate needs to be lowered via the PCAP_RATE_EN bit. Signed-off-by: Moritz Fischer <mdf@kernel.org> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-12 11:17:34 +0000