summaryrefslogtreecommitdiffstats
path: root/drivers/extcon
AgeCommit message (Collapse)AuthorFilesLines
2018-08-28extcon: int3496: Convert to use SPDX identifierAndy Shevchenko1-10/+2
Convert driver to use SPDX identifier. While here, fix MODULE_LICENSE() string to be the same as license text states. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-08-28extcon: cht-wc: Convert to use SPDX identifierAndy Shevchenko1-9/+1
Convert driver to use SPDX identifier. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-08-28extcon: cht-wc: Correct USBID bit field handlingAndy Shevchenko1-13/+19
USBID is 2-bit bit field according to specification. Make it clear. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-08-28extcon: cht-wc: Fix definition names according to specAndy Shevchenko1-8/+8
There is no suffix MASK in the spec and other small spelling fixes. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-08-28extcon: cht-wc: Return from default case to avoid warningsAndy Shevchenko1-1/+1
When we have first case to fall through it's not enough to put single comment there to satisfy compiler. Instead of doing that, return fall back value directly from default case. This to avoid following warnings: drivers/extcon/extcon-intel-cht-wc.c: In function ‘cht_wc_extcon_get_charger’: include/linux/device.h:1420:2: warning: this statement may fall through [-Wimplicit-fallthrough=] _dev_warn(dev, dev_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/extcon/extcon-intel-cht-wc.c:148:3: note: in expansion of macro ‘dev_warn’ dev_warn(ext->dev, ^~~~~~~~ drivers/extcon/extcon-intel-cht-wc.c:152:2: note: here case CHT_WC_USBSRC_TYPE_SDP: ^~~~ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-08-28extcon: Switch to use kasprintf() instead of open codedAndy Shevchenko1-10/+3
Switch to use kasprintf() instead of open coded variant. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-08-28extcon: Make static analyzer happy about union assignmentAndy Shevchenko1-1/+1
When assign unions we need to supply non-scalar value, otherwise static analyzer is not happy: CHECK drivers/extcon/extcon.c drivers/extcon/extcon.c:631:22: warning: cast to non-scalar Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-08-28extcon: maxim: Add SPDX license identifiersKrzysztof Kozlowski4-61/+26
Replace GPL v2.0+ license statements with SPDX license identifiers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-07-21Merge tag 'extcon-next-for-4.19' of ↵Greg Kroah-Hartman3-18/+9
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next Chanwoo writes: Update extcon for 4.19 Detailed description for this pull request: 1. Release locking when sending the connector state in extcon_sync() - Previously, extcon used the spinlock before calling the notifier_call_chain to prevent the scheduled out of task and to prevent the notification delay. When spinlock is locked for sending the notification, deadlock issue occured on the side of extcon consumer device. To fix this issue on extcon consumer device, release locking when sending the connector state. 2. Fix minor issues of extcon provider driver - extcon-intel-int3496.c uses 'linux/gpio/consumer.h' instead of 'linux/gpio.h' - extcon-usbc-cors-ec.c adds SPDX license and fix the wrong license information
2018-07-12extcon: Release locking when sending the notification of connector stateChanwoo Choi1-1/+2
Previously, extcon used the spinlock before calling the notifier_call_chain to prevent the scheduled out of task and to prevent the notification delay. When spinlock is locked for sending the notification, deadlock issue occured on the side of extcon consumer device. To fix this issue, extcon consumer device should always use the work. it is always not reasonable to use work. To fix this issue on extcon consumer device, release locking when sending the notification of connector state. Fixes: ab11af049f88 ("extcon: Add the synchronization extcon APIs to support the notification") Cc: stable@vger.kernel.org Cc: Roger Quadros <rogerq@ti.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-07-12extcon: usbc-cros-ec: Switch to SPDX identifier.Enric Balletbo i Serra1-15/+5
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-07-12extcon: usbc-cros-ec: Make license text and module license match.Enric Balletbo i Serra1-1/+1
The license text is specifying "GPLv2" but the MODULE_LICENSE is set to GPL which means GNU Public License v2 or later. When MODULE_LICENSE and boiler plate does not match, go for boiler plate license. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-07-12extcon: int3496: Use proper GPIO includeWolfram Sang1-1/+1
Since commit eca0f13c836a ("extcon: int3496: Ignore incorrect IoRestriction for ID pin"), the driver doesn't use GPIOF_* flags anymore. We can thus now drop the deprecated include file for GPIO and use the new one. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-07-11extcon: max3355: include mod_devicetable.hArnd Bergmann1-0/+1
Another driver turned up that is missing linux/mod_devicetable.h after the device IDs are split out from linux/platform_device.h: drivers/extcon/extcon-max3355.c:127:34: error: array type has incomplete element type 'struct of_device_id' static const struct of_device_id max3355_match_table[] = { Fixes: ac3167257b9f ("headers: separate linux/mod_devicetable.h from linux/platform_device.h") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07headers: separate linux/mod_devicetable.h from linux/platform_device.hRandy Dunlap2-0/+2
At over 4000 #includes, <linux/platform_device.h> is the 9th most #included header file in the Linux kernel. It does not need <linux/mod_devicetable.h>, so drop that header and explicitly add <linux/mod_devicetable.h> to source files that need it. 4146 #include <linux/platform_device.h> After this patch, there are 225 files that use <linux/mod_devicetable.h>, for a reduction of around 3900 times that <linux/mod_devicetable.h> does not have to be read & parsed. 225 #include <linux/mod_devicetable.h> This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/ Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-10/+14
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-04Merge tag 'char-misc-4.17-rc1' of ↵Linus Torvalds4-76/+91
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the big set of char/misc driver patches for 4.17-rc1. There are a lot of little things in here, nothing huge, but all important to the different hardware types involved: - thunderbolt driver updates - parport updates (people still care...) - nvmem driver updates - mei updates (as always) - hwtracing driver updates - hyperv driver updates - extcon driver updates - ... and a handful of even smaller driver subsystem and individual driver updates All of these have been in linux-next with no reported issues" * tag 'char-misc-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (149 commits) hwtracing: Add HW tracing support menu intel_th: Add ACPI glue layer intel_th: Allow forcing host mode through drvdata intel_th: Pick up irq number from resources intel_th: Don't touch switch routing in host mode intel_th: Use correct method of finding hub intel_th: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate stm class: Make dummy's master/channel ranges configurable stm class: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate MAINTAINERS: Bestow upon myself the care for drivers/hwtracing hv: add SPDX license id to Kconfig hv: add SPDX license to trace Drivers: hv: vmbus: do not mark HV_PCIE as perf_device Drivers: hv: vmbus: respect what we get from hv_get_synint_state() /dev/mem: Avoid overwriting "err" in read_mem() eeprom: at24: use SPDX identifier instead of GPL boiler-plate eeprom: at24: simplify the i2c functionality checking eeprom: at24: fix a line break eeprom: at24: tweak newlines eeprom: at24: refactor at24_probe() ...
2018-03-22extcon: axp288: Set USB role where necessaryHans de Goede2-9/+170
The AXP288 BC1.2 charger detection / extcon code may seem like a strange place to add code to control the USB role-switch on devices with an AXP288, but there are 2 reasons to do this inside the axp288 extcon code: 1) On many devices the USB role is controlled by ACPI AML code, but the AML code only switches between the host and none roles, because of Windows not really using device mode. To make device mode work we need to toggle between the none/device roles based on Vbus presence, and the axp288 extcon gets interrupts on Vbus insertion / removal. 2) In order for our BC1.2 charger detection to work properly the role mux must be properly set to device mode before we do the detection. Also note the Kconfig help-text / obsolete depends on USB_PHY which are remnants from older never upstreamed code also controlling the mux from the axp288 extcon code. This commit also adds code to get notifications from the INT3496 extcon device, which is used on some devices to notify the kernel about id-pin changes instead of them being handled through AML code. This fixes: -Device mode not working on most CHT devices with an AXP288 -Host mode not working on devices with an INT3496 ACPI device -Charger-type misdetection (always SDP) on devices with an INT3496 when the USB role (always) gets initialized as host Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-21Merge branch 'ib-extcon-drm-dt-v4.17' into extcon-nextChanwoo Choi1-10/+34
2018-03-21extcon: gpio: Convert to fully use GPIO descriptorLinus Walleij1-51/+15
Since we are not getting the GPIO from any platform data and global GPIO numberspace, we simply get the named "extcon" GPIO directly from the device. Cut away "active low" since GPIO descriptors already know if the line is active high or low. Simplify a bit with a struct device *dev helper variable in probe() and cut the complex init() function. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-03-21extcon: gpio: Move platform data into state containerLinus Walleij1-30/+33
This moves the platform data settings from the platform data struct and into the state container, saving some unnecessary references and simplifying things a bit. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [cw00.choi: Add FIXME comment of extcon_id] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-03-21extcon: gpio: Localize platform dataLinus Walleij1-1/+21
Nothing in the entire kernel #includes <linux/extcon/extcon-gpio.h> so move the platform data declaration inside of the driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-03-21extcon: int3496: Ignore incorrect IoRestriction for ID pinAndy Shevchenko1-4/+5
The commit 70216fd937fe ("extcon: int3496: Set the id pin to direction-input if necessary") introduced a workaround for incorrect IoRestriction mode in ACPI table. Now, when GPIO ACPI library does it in generic way, see the commit 1b2ca32ab0b8 ("gpiolib: acpi: Introduce NO_RESTRICTION quirk") for the details, just set an appropriate quirk flag instead. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-03-21extcon: intel-cht-wc: Set direction and drv flags for V5 boost GPIOHans de Goede1-4/+7
Sometimes (firmware bug?) the V5 boost GPIO is not configured as output by the BIOS, leading to the 5V boost convertor being permanently on, Explicitly set the direction and drv flags rather then inheriting them from the firmware to fix this. Fixes: 585cb239f4de ("extcon: intel-cht-wc: Disable external 5v boost ...") Cc: stable@vger.kernel.org Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-03-08extcon: add possibility to get extcon device by OF nodeAndrzej Hajda1-10/+34
Since extcon property is not allowed in DT, extcon subsystem requires another way to get extcon device. Lets try the simplest approach - get edev by of_node. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-02-14extcon: int3496: process id-pin first so that we start with the right statusHans de Goede1-1/+2
Some other drivers may be waiting for our extcon to show-up, exiting their probe methods with -EPROBE_DEFER until we show up. These drivers will typically get the cable state directly after getting the extcon, this commit changes the int3496 code to wait for the initial processing of the id-pin to complete before exiting probe() with 0, which will cause devices waiting on the defered probe to get reprobed. This fixes a race where the initial work might still be running while other drivers were already calling extcon_get_state(). Fixes: 2f556bdb9f2e ("extcon: int3496: Add Intel INT3496 ACPI ... driver") Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-02-13Revert "extcon: axp288: Redo charger type detection a couple of seconds ↵Hans de Goede1-30/+2
after probe()" Redoing the charger type detection to give the usb-role-switch code time to properly set the role-switch is no good for mainline, since the usb-role-switch code is not yet in mainline (my bad, sorry). Also once we've that code there are better ways to fix this which are not prone to racing as doing a retry after 2 seconds is. This reverts commit 50082c17bb1455acacd376ae30dff92f2e1addbd. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-02-13extcon: axp288: Constify the axp288_pwr_up_down_info arrayHans de Goede1-2/+2
Make the axp288_pwr_up_down_info array const char * const, this leads to the following section size changes: .text 0x674 -> 0x664 .data 0x148 -> 0x0f0 .rodata 0x0b4 -> 0x114 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-01-03extcon: axp288: Handle reserved charger-type values betterHans de Goede1-2/+2
According to the data sheets all the values not handled in the switch-case are "reserved". Update the dev_warn message to reflect this and set the cable-type to EXTCON_CHG_USB_SDP (so max 500mA current draw) as safe default. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-01-03extcon: axp288: Redo charger type detection a couple of seconds after probe()Hans de Goede1-2/+30
The axp288 extcon code depends on other drivers to do things like mux the data lines, enable/disable vbus based on the id-pin, etc. Sometimes the BIOS has not set these things up correctly resulting in the initial charger cable type detection giving a wrong result and we end up not charging or charging at only 0.5A. This commit starts a second charger-detection cycle a couple of seconds after the first one finishes, giving the other drivers time to load and do their thing. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-01-03Merge branch 'ib-extcon-mfd-4.16' into extcon-nextChanwoo Choi2-39/+142
2018-01-03extcon: axp288: Remove unused platform dataHans de Goede1-34/+1
This is not used / set anywhere in the tree. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-01-03extcon: axp288: Remove unused extcon_nb struct memberHans de Goede1-1/+0
Remove the unused extcon_nb struct member. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-01-03extcon: axp288:: Handle return value of platform_get_irqArvind Yadav1-0/+3
platform_get_irq() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-12-15extcon: usbc-cros-ec: add support to notify USB type cables.Benson Leung1-4/+138
Extend the driver to notify host and device type cables and the presence of power. Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-11-27extcon: adc-jack: Fix platform_get_irq's error checkingArvind Yadav1-1/+1
The platform_get_irq() function returns negative if an error occurs. zero or positive number on success. platform_get_irq() error checking for zero is not correct. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-11-27extcon: max8997: Delete unneeded initialization in max8997_muic_set_path()Markus Elfring1-1/+1
The variable "ret" will be set to an appropriate value a bit later. Thus this patch omits the explicit initialization at the beginning. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-11-27extcon: max77693: Delete unneeded initialization in max77693_muic_set_path()Markus Elfring1-1/+1
The variable "ret" will be set to an appropriate value a bit later. Thus this patch omits the explicit initialization at the beginning. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-11-13Merge tag 'usb-4.15-rc1' of ↵Linus Torvalds18-33/+98
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver updates for 4.15-rc1. There is the usual amount of gadget and xhci driver updates, along with phy and chipidea enhancements. There's also a lot of SPDX tags and license boilerplate cleanups as well, which provide some churn in the diffstat. Other major thing is the typec code that moved out of staging and into the "real" part of the drivers/usb/ tree, which was nice to see happen. All of these have been in linux-next with no reported issues for a while" * tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits) usb: gadget: f_fs: Fix use-after-free in ffs_free_inst USB: usbfs: compute urb->actual_length for isochronous usb: core: message: remember to reset 'ret' to 0 when necessary USB: typec: Remove remaining redundant license text USB: typec: add SPDX identifiers to some files USB: renesas_usbhs: rcar?.h: add SPDX tags USB: chipidea: ci_hdrc_tegra.c: add SPDX line USB: host: xhci-debugfs: add SPDX lines USB: add SPDX identifiers to all remaining Makefiles usb: host: isp1362-hcd: remove a couple of redundant assignments USB: adutux: remove redundant variable minor usb: core: add a new usb_get_ptm_status() helper usb: core: add a 'type' parameter to usb_get_status() usb: core: introduce a new usb_get_std_status() helper usb: core: rename usb_get_status() 'type' argument to 'recip' usb: core: add Status Type definitions USB: gadget: Remove redundant license text USB: gadget: function: Remove redundant license text USB: gadget: udc: Remove redundant license text USB: gadget: legacy: Remove redundant license text ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2-0/+2
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-24extcon: max77843: Add support for SmartDock accessoryMarek Szyprowski1-14/+63
SmartDock uses ADC_RESERVED_ACC_3 (0x10) ADC ID type and provides following features: 1. USB host with embedded USB hub (2-4 ports) for mice, keyboard, etc, 2. MHL for video output, 3. charging. Tested with Unitek Y-2165 MHL+OTG Hub Smart Phone Dock. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-10-24extcon: max77843: Add OTG power control to the MUIC driverMarek Szyprowski1-0/+16
Enabling power on VBUS micro-usb pin is required only when passive OTG cable is connected. Initially OTG VBUS power control was planned to be done in charger driver. However such information is not really available from the extcon notifications, so VBUS power control has to be done directly in MUIC driver, which has all information about the attached accessory. For example SmartDock is externally powered accessory, provides OTG (USB HOST) functionality and use VBUS pin for charging a device battery, so the VBUS charging pump should be disabled in such case. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-10-23extcon: max14577: Delete an unnecessary variable initialisation in ↵Markus Elfring1-1/+1
max14577_muic_set_path() The variable "ret" is immediately reassigned by a following statement. Thus omit the explicit initialisation at the beginning. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-10-23extcon: make extcon_info static const, fixes warningColin Ian King1-1/+1
The array extcon_info is read only, local to the source and does not need to be in global scope, so make it static const. Cleans up sparse warning: symbol 'extcon_info' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-10-23extcon: Split out extcon header file for consumer and provider deviceChanwoo Choi17-17/+17
The extcon has two type of extcon devices as following. - 'extcon provider deivce' adds new extcon device and detect the state/properties of external connector. Also, it notifies the state/properties to the extcon consumer device. - 'extcon consumer device' gets the change state/properties from extcon provider device. Prior to that, include/linux/extcon.h contains all exported API for both provider and consumer device driver. To clarify the meaning of header file and to remove the wrong use-case on consumer device, this patch separates into extcon.h and extcon-provider.h. [Description for include/linux/{extcon.h|extcon-provider.h}] - extcon.h includes the extcon API and data structure for extcon consumer device driver. This header file contains the following APIs: : Register/unregister the notifier to catch the change of extcon device : Get the extcon device instance : Get the extcon device name : Get the state of each external connector : Get the property value of each external connector : Get the property capability of each external connector - extcon-provider.h includes the extcon API and data structure for extcon provider device driver. This header file contains the following APIs: : Include 'include/linux/extcon.h' : Allocate the memory for extcon device instance : Register/unregister extcon device : Set the state of each external connector : Set the property value of each external connector : Set the property capability of each external connector Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-08-25extcon: max77693: Allow MHL attach notifierMaciej Purski1-3/+2
Without this patch extcon couldn't notify attaching MHL cable. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-08-16extcon: Correct description to improve the readabilityChanwoo Choi2-166/+158
The extcon files explains the detailed operation for functions and what is meaning of extcon structure. There are different explanation even if the same argument. So, it modifies the description for both functions and structures in order to improve the readability and guide the role of functions more well. Also, this patch fixes the mismatching license info as a GPL v2 and removes the inactive author information. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-08-16extcon: Remove unused CABLE_NAME_MAX definitionChanwoo Choi1-1/+0
This patch removes the unused CABLE_NAME_MAX definition. Signed-off-by: Chanwoo Choi <cwchoi00@gmail.com>
2017-08-07extcon: cros-ec: Fix a potential NULL pointer dereferenceChristophe JAILLET1-0/+2
Return -ENOMEM in case of memory allocation failure. This avoids a NULL pointer dereference. Fixes: c69831666109 ("extcon: cros-ec: Add extcon-cros-ec driver to support display out") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-07-19extcon: Convert to using %pOF instead of full_nameRob Herring1-2/+2
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 11:43:39 +0000