summaryrefslogtreecommitdiffstats
path: root/drivers/edac
AgeCommit message (Collapse)AuthorFilesLines
2009-09-24edac: core: remove completion-wait for complete with rcu_barrierJesper Dangaard Brouer3-10/+3
Module edac_core.ko uses call_rcu() callbacks in edac_device.c, edac_mc.c and edac_pci.c. They all use a wait_for_completion() scheme, but this scheme it not 100% safe on multiple CPUs. See the _rcu_barrier() implementation which explains why extra precausion is needed. The patch adds a comment about rcu_barrier() and as a precausion calls rcu_barrier(). A maintainer needs to look at removing the wait_for_completion code. [dougthompson@xmission.com: remove the wait_for_completion code] Signed-off-by Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24edac: i3200 memory controller driverJason Uhlenkott3-0/+536
A driver for the Intel 3200 and 3210 memory controllers. It has only had light testing so far, and currently makes no attempt to decode error addresses at anything finer than csrow granularity. Signed-off-by: Jason Uhlenkott <juhlenko@akamai.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24edac: fix resource size calculationJulia Lawall2-14/+14
Use the function resource_size, which reduces the chance of introducing off-by-one errors in calculating the resource size. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ struct resource *res; @@ - (res->end - res->start) + 1 + resource_size(res) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24edac: mpc85xx add mpc83xx supportIra W. Snyder2-12/+22
Add support for the Freescale MPC83xx memory controller to the existing driver for the Freescale MPC85xx memory controller. The only difference between the two processors are in the CS_BNDS register parsing code, which has been changed so it will work on both processors. The L2 cache controller does not exist on the MPC83xx, but the OF subsystem will not use the driver if the device is not present in the OF device tree. I had to change the nr_pages calculation to make the math work out. I checked it on my board and did the math by hand for a 64GB 85xx using 64K pages. In both cases, nr_pages * PAGE_SIZE comes out to the correct value. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Cc: Kumar Gala <galak@gate.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24edac: mpc85xx add P2020DS supportYang Shi1-0/+2
Based on Kumar's new compatible types patch, add P2020 into MPC85xx EDAC compatible lists so that EDAC can recognize P2020 meomry controller and L2 cache controller and export the relevant fields to sysfs. EDAC MPC85xx DDR3 support is needed if DDR3 memory stick is installed on a P2020DS board so that EDAC core can recognize DDR3 memory type. Signed-off-by: Yang Shi <yang.shi@windriver.com> Acked-by: Dave Jiang <djiang@mvista.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-21trivial: fix typo "for for" in multiple filesAnand Gadiyar1-1/+1
trivial: fix typo "for for" in multiple files Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-16amd64_edac: check NB MCE bank enable on the current node properlyBorislav Petkov1-21/+45
The old code was using smp_call_function_many which skips the current cpu if it is in the supplied cpumask. Switch to the rdmsr_on_cpus() interface which takes care of that. In addition, add get_cpus_on_this_dct_cpumask helper which computes a cpumask of all the cores on a node and thus on a DCT. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-16amd64_edac: Rewrite unganged mode code of f10_early_channel_countWan Wei1-35/+10
Simplify the procedure by checking if there is any DIMM in each channel. This patch will fix the bugs such as when there is no DIMMs under certain node, two DIMMs in the same channel, and only one DIMM in each channel of the node. Borislav: minor fixups Signed-off-by: Wan Wei <wanwei@mail.dawning.com.cn> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-16amd64_edac: cleanup amd64_check_ecc_enabledBorislav Petkov1-51/+25
Simplify code flow and make sure return value is always valid since further driver init depends on it. Carve out long warning string and make code more readable. Shorten some names, while at it. There should be no functional change resulting from this patch. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-16x86, EDAC: Provide function to return NodeId of a CPUAndreas Herrmann1-1/+1
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Acked-by: H. Peter Anvin <hpa@zytor.com>
2009-09-16amd64_edac: build driver only on AMD hardwareIngo Molnar1-1/+1
-tip testing found the following build failure (config attached): drivers/built-in.o: In function `amd64_check': amd64_edac.c:(.text+0x3e9491): undefined reference to `amd_decode_nb_mce' drivers/built-in.o: In function `amd64_init_2nd_stage': amd64_edac.c:(.text+0x3e9b46): undefined reference to `amd_report_gart_errors' amd64_edac.c:(.text+0x3e9b55): undefined reference to `amd_register_ecc_decoder' drivers/built-in.o: In function `amd64_nbea_store': amd64_edac_dbg.c:(.text+0x3ea22e): undefined reference to `amd_decode_nb_mce' drivers/built-in.o: In function `amd64_remove_one_instance': amd64_edac.c:(.devexit.text+0x3eea): undefined reference to `amd_report_gart_errors' amd64_edac.c:(.devexit.text+0x3ef6): undefined reference to `amd_unregister_ecc_decoder' the AMD EDAC code has a dependency on CONFIG_CPU_SUP_AMD facilities. The patch below solves the problem here. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14EDAC, AMD: decode FR MCEsBorislav Petkov1-0/+13
See Fam10h BKDG (31116, rev. 3.28), Table 101. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14EDAC, AMD: decode load store MCEsBorislav Petkov1-0/+25
See Fam10h BKDG (31116, rev. 3.28), Table 100. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14EDAC, AMD: decode bus unit MCEsBorislav Petkov1-0/+46
... according to Table 69, Fam10h BKDG (31116, rev. 3.28). Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14EDAC, AMD: decode instruction cache MCEsBorislav Petkov1-0/+61
See Fam10h BKDG (31116, rev. 3.28), Table 95 Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14EDAC, AMD: decode data cache MCEsBorislav Petkov1-2/+54
Those get reported in MC0_STATUS, see Table 92, F10h BKDG (31116, rev. 3.28) for more details. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14EDAC, AMD: carve out decoding of MCi_STATUS ErrorCodeBorislav Petkov2-19/+22
This is the MCE error code from the MCi_STATUS banks, bits [15:0] which describe what type of error was encountered: GART TLB, Memory or Bus error. The semantics of those bits are identical across all MCE banks so decode those separately, irrespectively of MCE type. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14EDAC, AMD: carve out MCi_STATUS decodingBorislav Petkov3-35/+34
The MCi_STATUS registers have most field definitions in common so decode them in the general path. Do not pass ecc_type along and compute it in __amd64_decode_bus_error instead. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14x86, mce: pass mce info to EDAC for decodingBorislav Petkov5-111/+178
Move NB decoder along with required defines to EDAC MCE core. Add registration routines for further decoding of the MCE info in the AMD64 EDAC module. CC: Andi Kleen <andi@firstfloor.org> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14amd64_edac: cleanup amd64_decode_bus_errorBorislav Petkov1-26/+9
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14amd64_edac: remove memory and GART TLB error decodersBorislav Petkov1-29/+7
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14amd64_edac: cleanup/complete NB MCE decodingBorislav Petkov4-99/+56
* don't dump info which mcheck already does * update to newest BKDG * mv amd64_process_error_info -> amd64_decode_nb_mce * shorten error struct names * remove redundant info ptr in amd64_process_error_info * remove unused ErrorCodeExt[19:16] (MCx_STATUS) defines Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14amd64_edac: cleanup amd64_process_error_infoBorislav Petkov2-29/+25
* mv amd64_error_info_regs -> err_regs * remove redundant info ptr Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14EDAC: beef up ErrorCodeExt error signaturesBorislav Petkov1-34/+37
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14EDAC: move MCE error descriptions to EDAC coreBorislav Petkov5-148/+122
This is in preparation of adding AMD-specific MCE decoding functionality to the EDAC core. The error decoding macros originate from the AMD64 EDAC driver albeit in a simplified and cleaned up version here. While at it, add macros to generate the error description strings and use them in the error type decoders directly which removes a bunch of code and makes the decoding functions much more readable. Also, fix strings and shorten macro names. Remove superfluous htlink_msgs. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-08-04amd64_edac: print debug statements only on errorDoug Thompson1-0/+4
Add forgotten return calls for the successful cases. Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-08-03amd64_edac: fix ECC checkingDoug Thompson1-0/+3
On the good path of BIOS enabled ECC and no override, the value returned is 1 by omission and thus is deemed failing by the probe-function. Allow proper module initialization by clearing the retval explicitly. Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-07-29edac: x38 fix mchbar high register addrLu Zhihe1-1/+1
Intel X38 MCHBAR is a 64bits register, base from 0x48, so its higher base is 0x4C. Signed-off-by: Lu Zhihe <tombowfly@gmail.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Cc: <stable@kernel.org> [2.6.30.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-27amd64_edac: read the right F2 maskoffset regWan Wei1-1/+1
Signed-off-by: Wan Wei <onewayforever@gmail.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-30edac: add DDR3 memory type for MPC85xx EDACYang Shi4-1/+14
Since some new MPC85xx SOCs support DDR3 memory now, so add DDR3 memory type for MPC85xx EDAC. Signed-off-by: Yang Shi <yang.shi@windriver.com> Cc: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-26amd64_edac: misc small cleanupsBorislav Petkov2-7/+8
- cleanup debug calls - shorten function names - cleanup error exit paths Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-26amd64_edac: fix ecc_enable_override handlingBorislav Petkov1-1/+6
amd64_check_ecc_enabled() returns non-zero status when ECC checking/correcting is disabled and this fails further loading of the driver even when 'ecc_enable_override' boot param is used. Fix that by clearing return status in that case. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-26amd64_edac: check only ECC bit in amd64_determine_edac_capBorislav Petkov1-3/+2
Checking whether the machine is using ECC enabled DRAM is done through testing the DimmEccEn bit in the DRAM Cfg Low register (F2x[1,0]90). Do that instead of testing all bits from the DimmEccEn upwards. Also, remove mci->edac_cap assignment and use value returned from amd64_determine_edac_cap(). Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-18edac: Kconfig: fix the meaning of EDAC abbreviationGeunSik Lim1-1/+1
Fix the meaning of EDAC(Error Detection And Correction) correctly. [akpm@linux-foundation.org: add missing space] Signed-off-by: GeunSik Lim <geunsik.lim@samsung.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18edac: add missing __devexit_p()Mike Frysinger1-1/+1
The remove function uses __devexit, so the .remove assignment needs __devexit_p() to fix a build error with hotplug disabled. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18edac: add edac_device_alloc_index()Harry Ciao3-2/+16
Add edac_device_alloc_index(), because for MAPLE platform there may exist several EDAC driver modules that could make use of edac_device_ctl_info structure at the same time. The index allocation for these structures should be taken care of by EDAC core. [akpm@linux-foundation.org: cleanups] Signed-off-by: Harry Ciao <qingtao.cao@windriver.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18edac: add CPC925 Memory Controller driverHarry Ciao3-0/+1027
Introduce IBM CPC925 EDAC driver, which makes use of ECC, CPU and HyperTransport Link error detections and corrections on the IBM CPC925 Bridge and Memory Controller. [akpm@linux-foundation.org: cleanup] Signed-off-by: Harry Ciao <qingtao.cao@windriver.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-12trivial: fix typos s/paramter/parameter/ and s/excute/execute/ in ↵Martin Olsson1-1/+1
documentation and source comments. Signed-off-by: Martin Olsson <martin@minimum.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-10EDAC: do not enable modules by defaultBorislav Petkov1-1/+0
Prevent EDAC compilation units from being built by default and let the user explicitly select the needed modules. Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Tested-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: do not enable module by defaultBorislav Petkov1-4/+3
While at it, fix a link failure when !K8_NB. Acked-by: Doug Thompson <dougthompson@xmission.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Tested-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: add module registration routinesDoug Thompson4-0/+422
Also, link into Kbuild by adding Kconfig and Makefile entries. Borislav: - Kconfig/Makefile splitting - use zero-sized arrays for the sysfs attrs if not enabled - rename sysfs attrs to more conform values - shorten CONFIG_ names - make multiple structure members assignment vertically aligned - fix/cleanup comments - fix function return value patterns - fix err labels - fix a memleak bug caught by Ingo - remove the NUMA dependency and use num_k8_northbrides for initializing a driver instance per NB. - do not copy the pvt contents into the mci struct in amd64_init_2nd_stage() and save it in the mci->pvt_info void ptr instead. - cleanup debug calls - simplify amd64_setup_pci_device() Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: add ECC reporting initializersDoug Thompson2-1/+209
Borislav: - convert to the new {rd|wr}msr_on_cpus interfaces. - convert pvt->old_mcgctl to a bitmask thus saving some bytes - fix/cleanup comments - fix function return value patterns - add a proper bugfix found by Doug to amd64_check_ecc_enabled where we missed checking for the ECC enabled bit in NB CFG. - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: add EDAC core-related initializersDoug Thompson1-0/+315
Borislav: - add a amd64_free_mc_sibling_devices() helper instead of opencoding the release-path. - fix/cleanup comments - fix function return value patterns - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: add error decoding logicDoug Thompson1-0/+425
Borislav: - fold amd64_error_info_valid() into its only user - fix/cleanup comments - fix function return value patterns - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: add ECC chipkill syndrome mapping tableDoug Thompson1-0/+135
Borislav: - fix comments - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: add per-family descriptorsDoug Thompson1-0/+72
Borislav: - fix comments - fix function return value patterns Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: add F10h-and-later methods-p3Doug Thompson1-4/+265
Borislav: - compute dct_sel_base_off in f10_match_to_this_node() correctly since it cannot be assumed that the Reserved bits are zero and they have to be masked out instead. - cleanup, remove StinkyIdentifiers, simplify logic - fix function return value patterns - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: add F10h-and-later methods-p2Doug Thompson1-0/+196
Borislav: - fix a wrong negation in f10_determine_base_addr_offset() - fix a wrong mask in f10_determine_base_addr_offset() which should select DctSelBaseAddr[31:11] and not [31:16] as it was before - remove StinkyIdentifiers, trivially simplify code. - fix/cleanup comments - fix function return value patterns Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: add F10h-and-later methods-p1Doug Thompson1-0/+181
Borislav: Fail f10_early_channel_count() if error encountered while reading a NB register since those cached register contents are accessed afterwards. - fix/cleanup comments - fix function return value patterns - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: add k8-specific methodsDoug Thompson1-0/+173
Borislav: - fix/cleanup/move comments - fix function return value patterns - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-14 09:16:18 +0000