summaryrefslogtreecommitdiffstats
path: root/drivers/edac
AgeCommit message (Collapse)AuthorFilesLines
2016-08-21EDAC, skx_edac: Add EDAC driver for SkylakeTony Luck3-0/+1130
This is an entirely new driver instead of yet another set of patches to sb_edac.c because: 1) Mapping from PCI devices to socket/memory controller is significantly different. Skylake scatters devices on a socket across a number of PCI buses. 2) There is an extra level of interleaving via the "mcroute" register that would be a little messy to squeeze into the old driver. 3) Validation is getting too expensive. Changes to sb_edac need to be checked against Sandy Bridge, Ivy Bridge, Haswell, Broadwell and Knights Landing. Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-08EDAC, sb_edac: Fix channel reporting on Knights LandingLukasz Odzioba1-4/+11
On Intel Xeon Phi Knights Landing processor family the channels of the memory controller have untypical arrangement - MC0 is mapped to CH3,4,5 and MC1 is mapped to CH0,1,2. This causes the EDAC driver to report the channel name incorrectly. We missed this change earlier, so the code already contains similar comment, but the translation function is incorrect. Without this patch: errors in DIMM_A and DIMM_D were reported in DIMM_D errors in DIMM_B and DIMM_E were reported in DIMM_E errors in DIMM_C and DIMM_F were reported in DIMM_F Correct this. Hubert Chrzaniuk: - rebased to 4.8 - comments and code cleanup Fixes: d0cdf9003140 ("sb_edac: Add Knights Landing (Xeon Phi gen 2) support") Reviewed-by: Tony Luck <tony.luck@intel.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: lukasz.anaczkowski@intel.com Cc: lukasz.odzioba@intel.com Cc: mchehab@kernel.org Cc: <stable@vger.kernel.org> # v4.5.. Link: http://lkml.kernel.org/r/1469231089-22837-1-git-send-email-lukasz.odzioba@intel.com Signed-off-by: Lukasz Odzioba <lukasz.odzioba@intel.com> [ Boris: Simplify a bit by removing char mc. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2016-07-27Merge tag 'edac_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds5-74/+466
Pull EDAC updates from Borislav Petkov: "This last cycle, Thor was busy adding Arria10 eth FIFO support to the altera_edac driver along with other improvements. We have two cleanups/fixes too. Summary: - Altera Arria10 ethernet FIFO buffer support (Thor Thayer) - Minor cleanups" * tag 'edac_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: ARM: dts: Add Arria10 Ethernet EDAC devicetree entry EDAC, altera: Add Arria10 Ethernet EDAC support EDAC, altera: Add Arria10 ECC memory init functions Documentation: dt: socfpga: Add Arria10 Ethernet binding EDAC, altera: Drop some ifdeffery EDAC, altera: Add panic flag check to A10 IRQ EDAC, altera: Check parent status for Arria10 EDAC block EDAC, altera: Make all private data structures static EDAC: Correct channel count limit EDAC, amd64_edac: Init opstate at the proper time during init EDAC, altera: Handle Arria10 SDRAM child node EDAC, altera: Add ECC Manager IRQ controller support Documentation: dt: socfpga: Add interrupt-controller to ecc-manager
2016-07-16EDAC, sb_edac: Fix Knights LandingTony Luck1-14/+6
In commit 2c1ea4c700af ("EDAC, sb_edac: Use cpu family/model in driver detection") I broke Knights Landing because I failed to notice that it called a wrapper macro "sbridge_get_all_devices_knl" instead of "sbridge_get_all_devices" like all the other types. Now that we include the processor type in the pci_id_table structure we can skip the wrappers and just have the sbridge_get_all_devices() check the type to decide whether to allow duplicate devices and controllers to have registers spread across buses. Fixes: 2c1ea4c700af ("EDAC, sb_edac: Use cpu family/model in driver detection") Tested-by: Lukasz Odzioba <lukasz.odzioba@intel.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-06-25EDAC, altera: Add Arria10 Ethernet EDAC supportThor Thayer3-2/+45
Add Altera Arria10 Ethernet FIFO memory EDAC support. Update to support a common compatibility string for all Ethernet FIFOs in the DT. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1466603939-7526-8-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-06-24EDAC, altera: Add Arria10 ECC memory init functionsThor Thayer2-0/+200
In preparation for additional memory module ECCs, add the memory initialization functions and helpers. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1466603939-7526-7-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-06-24EDAC, altera: Drop some ifdefferyThor Thayer1-29/+33
Make the IRQ and check_deps() functions available to all the memory buffers by moving them outside of the OCRAM only area. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1466603939-7526-5-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-06-24EDAC, altera: Add panic flag check to A10 IRQThor Thayer2-1/+9
In preparation for additional memory module ECCs, the IRQ function will check a panic flag before doing a kernel panic on double bit errors. OCRAM uncorrectable errors cause a panic because sleep/resume functions and FPGA contents during sleep are stored in OCRAM. ECCs on peripheral FIFO buffers will not cause a kernel panic on DBERRs because the packet can be retried and therefore recovered. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1466603939-7526-3-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-06-24EDAC, altera: Check parent status for Arria10 EDAC blockThor Thayer1-0/+17
In preparation for the Arria10 ECC modules, check the status of the parent in the device tree to ensure the block is enabled. Skip if no parent phandle is set in the device tree. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1466603939-7526-2-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-06-24EDAC, altera: Make all private data structures staticThor Thayer1-8/+8
The device private data structures are used only here so make them static. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1466603939-7526-4-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-06-16EDAC: Correct channel count limitBorislav Petkov1-1/+19
c44696fff04f ("EDAC: Remove arbitrary limit on number of channels") lifted the arbitrary limit on memory controller channels in EDAC. However, the dynamic channel attributes dynamic_csrow_dimm_attr and dynamic_csrow_ce_count_attr remained 6. This wasn't a problem except channels 6 and 7 weren't visible in sysfs on machines with more than 6 channels after the conversion to static attr groups with 2c1946b6d629 ("EDAC: Use static attribute groups for managing sysfs entries") [ without that, we're exploding in edac_create_sysfs_mci_device() because we're dereferencing out of the bounds of the dynamic_csrow_dimm_attr array. ] Add attributes for channels 6 and 7 along with a guard for the future, should more channels be required and/or to sanity check for misconfigured machines. We still need to check against the number of channels present on the MC first, as Thor reported. Signed-off-by: Borislav Petkov <bp@suse.de> Reported-by: Hironobu Ishii <ishii.hironobu@jp.fujitsu.com> Tested-by: Thor Thayer <tthayer@opensource.altera.com> Cc: <stable@vger.kernel.org> # 4.2
2016-06-16EDAC, amd64_edac: Init opstate at the proper time during initBorislav Petkov1-2/+2
It is useless to do it if we're loaded on unsupported hardware so do that only after we have detected at least 1 supported AMD northbridge. Signed-off-by: Borislav Petkov <bp@suse.de>
2016-06-08EDAC, altera: Handle Arria10 SDRAM child nodeThor Thayer1-3/+17
Separate the device match arrays for each platform to prevent CycloneV matches when calling of_platform_populate() on the Arria10 ECC manager node. If the SDRAM is a child node of ECC manager, call probe function via of_platform_populate(). Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1464193783-5071-4-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-06-08EDAC, altera: Add ECC Manager IRQ controller supportThor Thayer2-42/+130
To better support child devices, the ECC manager needs to be implemented as an IRQ controller. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1465331757-10227-1-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-06-03EDAC, sb_edac: Readd accidentally dropped Broadwell-D supportTony Luck1-8/+14
In commit 2c1ea4c700af ("EDAC, sb_edac: Use cpu family/model in driver detection") we switched from using PCI ids to determine which platform we are running on to using CPU model instead. I forgot that Broadwell-DE has its own distinct model number different from Broadwell-EP or -EX. Fixing this isn't just adding a line to the array of cpuids - the exising code assumed a 1:1 mapping between entries in that array and the "enum type" values. Added the type to pci_id_table structure to remove this dependency and allows two Broadwell cpu models. Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Fixes: 2c1ea4c700af ("EDAC, sb_edac: Use cpu family/model in driver detection") Link: http://lkml.kernel.org/r/b3cffe40dec6dfe0235a5d52a504f0ba86a07ce7.1464902605.git.tony.luck@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-06-03EDAC: Fix workqueues poll period resettingNicholas Krause1-1/+2
After the workqueue cleanup, we're registering workqueues based on the presence of an ->edac_check function. When that is the case, we're setting OP_RUNNING_POLL. But we forgot to check that in edac_mc_reset_delay_period(), leading to: BUG: unable to handle kernel paging request at 0000000000015d10 IP: [ .. ] queued_spin_lock_slowpath PGD 3ffcc8067 PUD 3ffc56067 PMD 0 Oops: 0002 [#1] SMP Modules linked in: ... CPU: 1 PID: 2792 Comm: edactest Not tainted 4.6.0-dirty #1 Hardware name: HP ProLiant MicroServer, BIOS O41 10/01/2013 Stack: Call Trace: ? _raw_spin_lock_irqsave ? lock_timer_base.isra.34 ? del_timer ? try_to_grab_pending ? mod_delayed_work_on ? edac_mc_reset_delay_period ? edac_set_poll_msec ? param_attr_store ? module_attr_store ? kernfs_fop_write ? __vfs_write ? __vfs_read ? __alloc_fd ? vfs_write ? SyS_write ? entry_SYSCALL_64_fastpath Code: RIP [ .. ] queued_spin_lock_slowpath RSP <> CR2: 0000000000015d10 ---[ end trace 3f286bc71cca15d1 ]--- Kernel panic - not syncing: Fatal exception Fix it. Signed-off-by: Nicholas Krause <xerofoify@gmail.com> Cc: <stable@vger.kernel.org> # 4.5 Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1463697958-13406-1-git-send-email-xerofoify@gmail.com [ Rewrite commit message. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2016-06-03EDAC, sb_edac: Fix rank lookup on BroadwellTony Luck1-5/+8
Broadwell made a small change to the rank target register moving the target rank ID field up from bits 16:19 to bits 20:23. Also found that the offset field grew by one bit in the IVY_BRIDGE to HASWELL transition, so fix the RIR_OFFSET() macro too. Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: stable@vger.kernel.org # v3.19+ Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/2943fb819b1f7e396681165db9c12bb3df0e0b16.1464735623.git.tony.luck@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-05-17Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (21 commits) gitignore: fix wording mfd: ab8500-debugfs: fix "between" in printk memstick: trivial fix of spelling mistake on management cpupowerutils: bench: fix "average" treewide: Fix typos in printk IB/mlx4: printk fix pinctrl: sirf/atlas7: fix printk spelling serial: mctrl_gpio: Grammar s/lines GPIOs/line GPIOs/, /sets/set/ w1: comment spelling s/minmum/minimum/ Blackfin: comment spelling s/divsor/divisor/ metag: Fix misspellings in comments. ia64: Fix misspellings in comments. hexagon: Fix misspellings in comments. tools/perf: Fix misspellings in comments. cris: Fix misspellings in comments. c6x: Fix misspellings in comments. blackfin: Fix misspelling of 'register' in comment. avr32: Fix misspelling of 'definitions' in comment. treewide: Fix typos in printk Doc: treewide : Fix typos in DocBook/filesystem.xml ...
2016-05-16Merge tag 'edac_for_4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds10-451/+654
Pull EDAC updates from Borislav Petkov: "It was pretty busy in EDAC land this time: - Altera Arria10 L2 cache and On-Chip RAM ECC handling (Thor Thayer) - Remove ad-hoc buffering of MCE records in sb_edac and i7core_edac (Tony Luck) - Do not register sb_edac with pci_register_driver() (Tony Luck) - Add support for Skylake to ie31200_edac (Jason Baron) - Do not register amd64_edac with pci_register_driver() (Borislav Petkov) ... plus the usual round of cleanups and fixes all over the place" * tag 'edac_for_4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (25 commits) EDAC, amd64_edac: Drop pci_register_driver() use EDAC, ie31200_edac: Add Skylake support EDAC, sb_edac: Use cpu family/model in driver detection EDAC, i7core: Remove double buffering of error records EDAC, amd64_edac: Issue driver banner only on success ARM: socfpga: Initialize Arria10 OCRAM ECC on startup EDAC: Increment correct counter in edac_inc_ue_error() EDAC, sb_edac: Remove double buffering of error records EDAC: Fix used after kfree() error in edac_unregister_sysfs() EDAC, altera: Avoid unused function warnings EDAC, altera: Remove useless casts ARM: socfpga: Enable Arria10 OCRAM ECC on startup EDAC, altera: Add Arria10 OCRAM ECC support Documentation: dt: socfpga: Add Altera Arria10 OCRAM binding EDAC, altera: Make OCRAM ECC dependency check generic EDAC, altera: Add register offset for ECC Enable EDAC, altera: Extract error inject operations to a struct fops ARM: socfpga: Enable Arria10 L2 cache ECC on startup EDAC, altera: Add Arria10 L2 Cache ECC handling Documentation, dt, socfpga: Add Altera Arria10 L2 cache binding ...
2016-05-12EDAC, mce_amd: Detect SMCA using X86_FEATURE_SMCAYazen Ghannam1-6/+3
Use X86_FEATURE_SMCA when detecting if SMCA is available instead of directly using CPUID 0x80000007_EBX. Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1462971509-3856-7-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-05-09EDAC, amd64_edac: Drop pci_register_driver() useBorislav Petkov2-83/+44
- remove homegrown instances counting. - take F3 PCI device from amd_nb caching instead of F2 which was used with the PCI core. With those changes, the driver doesn't need to register a PCI driver and relies on the northbridges caching which we do anyway on AMD. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Yazen Ghannam <yazen.ghannam@amd.com>
2016-05-06EDAC, ie31200_edac: Add Skylake supportJason Baron1-31/+90
Skylake adjusts some register locations, but otherwise follows the existing model quite closely. I was able to verify that the 'ce_count' increments when 'bad dimms' are used. The accounting of 'ce_count' and 'ue_count' is the primary functionality of interest for us. Tested on Intel(R) Xeon(R) CPU E3-1260L v5 @ 2.90GHz. Signed-off-by: Jason Baron <jbaron@akamai.com> Acked-by: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1462547927-22679-1-git-send-email-jbaron@akamai.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-05-02EDAC, sb_edac: Use cpu family/model in driver detectionTony Luck1-98/+36
Instead of picking a random PCI ID from the dozen or so we need to access, just use x86_match_cpu() to pick based on CPU model number. The choosing of PCI devices has been problematic in the past, see 11249e739929 ("sb_edac: Fix detection on SNB machines") which fixed problems introduced by d0585cd815fa ("sb_edac: Claim a different PCI device"). This is especially ugly if future hardware might not even have EDAC-relevant registers in PCI config space and we would still be required to choose some "random" PCI devices to scan for just so our driver loads. Is this cleaner/clearer? It deletes much more code than it adds. Only tested on Broadwell. The driver loads/unloads and loads again. Still decodes errors too. Signed-off-by: Tony Luck <tony.luck@intel.com> Suggested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Borislav Petkov <bp@suse.de>
2016-04-29EDAC, i7core: Remove double buffering of error recordsTony Luck1-76/+5
In the bad old days the functions from x86_mce_decoder_chain could be called in machine check context. So we used to carefully copy them and defer processing until later. But in f29a7aff4bd60 ("x86/mce: Avoid potential deadlock due to printk() in MCE context") we switched the logging code to save the record in a genpool, and call the functions that registered to be notified later from a work queue. So drop all the double buffering and do all the work we want to do as soon as i7core_mce_check_error() is called. Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/29ab2c370915c6e132fc5d88e7b72cb834bedbfe.1461855008.git.tony.luck@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-04-29EDAC: i7core, sb_edac: Don't return NOTIFY_BAD from mce_decoder callbackTony Luck2-2/+2
Both of these drivers can return NOTIFY_BAD, but this terminates processing other callbacks that were registered later on the chain. Since the driver did nothing to log the error it seems wrong to prevent other interested parties from seeing it. E.g. neither of them had even bothered to check the type of the error to see if it was a memory error before the return NOTIFY_BAD. Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/72937355dd92318d2630979666063f8a2853495b.1461864507.git.tony.luck@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-04-27EDAC, amd64_edac: Issue driver banner only on successBorislav Petkov1-2/+2
... and don't mislead users into thinking that the driver has loaded successfully. Signed-off-by: Borislav Petkov <bp@suse.de>
2016-04-23EDAC: Increment correct counter in edac_inc_ue_error()Emmanouil Maroudas1-1/+1
Fix typo in edac_inc_ue_error() to increment ue_noinfo_count instead of ce_noinfo_count. Signed-off-by: Emmanouil Maroudas <emmanouil.maroudas@gmail.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Fixes: 4275be635597 ("edac: Change internal representation to work with layers") Link: http://lkml.kernel.org/r/1461425580-5898-1-git-send-email-emmanouil.maroudas@gmail.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-04-23EDAC, sb_edac: Remove double buffering of error recordsTony Luck1-85/+3
In the bad old days the functions from x86_mce_decoder_chain could be called in machine check context. So we used to carefully copy them and defer processing until later. But in f29a7aff4bd60 ("x86/mce: Avoid potential deadlock due to printk() in MCE context") we switched the logging code to save the record in a genpool, and call the functions that registered to be notified later from a work queue. So drop all the double buffering and do all the work we want to do as soon as sbridge_mce_check_error() is called. Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: patrickg@supermicro.com Link: http://lkml.kernel.org/r/100025611cd780d9bca72792b2b2146760da53e0.1460756761.git.tony.luck@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-04-23EDAC: Fix used after kfree() error in edac_unregister_sysfs()Tony Luck1-1/+2
Code flow looks like this: device_unregister(&mci->dev); -> kobject_put+0x25/0x50 -> kobject_cleanup+0x77/0x190 -> device_release+0x32/0xa0 -> mci_attr_release+0x36/0x70 -> kfree(mci); bus_unregister(mci->bus); Fix is to grab a local copy of "mci->bus" and use that when we call bus_unregister(). Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/21d595b0ab3d718d9cb206647f4ec91c05e62ec4.1461261078.git.tony.luck@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-04-23EDAC, altera: Avoid unused function warningsArnd Bergmann1-41/+37
The recently added Arria10 OCRAM ECC support caused some new harmless warnings about unused functions when it is disabled: drivers/edac/altera_edac.c:1067:20: error: 'altr_edac_a10_ecc_irq' defined but not used [-Werror=unused-function] drivers/edac/altera_edac.c:658:12: error: 'altr_check_ecc_deps' defined but not used [-Werror=unused-function] This rearranges the code slightly to have those two functions inside of the same #ifdef that hides their callers. It also manages to avoid a forward declaration of the IRQ handler in the process. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thor Thayer <tthayer@opensource.altera.com> Cc: Alan Tull <atull@opensource.altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: linux-edac <linux-edac@vger.kernel.org> Fixes: c7b4be8db8bc ("EDAC, altera: Add Arria10 OCRAM ECC support") Link: http://lkml.kernel.org/r/1460837650-1237650-2-git-send-email-arnd@arndb.de Signed-off-by: Borislav Petkov <bp@suse.de>
2016-04-23EDAC, altera: Remove useless castsArnd Bergmann1-9/+6
The altera EDAC driver refers to its per-device data using a cast to '(void *)', which makes the pointer non-const, though both the source and destination are actually const. Removing the annotation makes the reference (almost) fit into a single line for improved readability, and ensures that it is actually defined as const. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thor Thayer <tthayer@opensource.altera.com> Cc: Alan Tull <atull@opensource.altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1460837650-1237650-1-git-send-email-arnd@arndb.de Signed-off-by: Borislav Petkov <bp@suse.de>
2016-04-22x86 EDAC, sb_edac.c: Take account of channel hashing when neededTony Luck1-1/+23
Haswell and Broadwell can be configured to hash the channel interleave function using bits [27:12] of the physical address. On those processor models we must check to see if hashing is enabled (bit21 of the HASWELL_HASYSDEFEATURE2 register) and act accordingly. Based on a patch by patrickg <patrickg@supermicro.com> Tested-by: Patrick Geary <patrickg@supermicro.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-edac@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-22x86 EDAC, sb_edac.c: Repair damage introduced when "fixing" channel addressTony Luck1-3/+3
In commit: eb1af3b71f9d ("Fix computation of channel address") I switched the "sck_way" variable from holding the log2 value read from the h/w to instead be the actual number. Unfortunately it is needed in log2 form when used to shift the address. Tested-by: Patrick Geary <patrickg@supermicro.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-edac@vger.kernel.org Cc: stable@vger.kernel.org Fixes: eb1af3b71f9d ("Fix computation of channel address") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-18treewide: Fix typos in printkMasanari Iida1-1/+1
This patch fix spelling typos found in printk within various part of the kernel sources. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-04-07EDAC, altera: Add Arria10 OCRAM ECC supportThor Thayer2-0/+113
Add Arria10 On-Chip RAM ECC handling. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: devicetree@vger.kernel.org Cc: dinguyen@opensource.altera.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux@arm.linux.org.uk Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1459992174-8015-1-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-04-02EDAC, altera: Make OCRAM ECC dependency check genericThor Thayer1-22/+21
In preparation for the Arria10 peripheral ECCs, move the OCRAM ECC dependency check into the general ECC area since this same function can be used by other memories. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: devicetree@vger.kernel.org Cc: dinguyen@opensource.altera.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux@arm.linux.org.uk Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1459450087-24792-4-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-04-02EDAC, altera: Add register offset for ECC EnableThor Thayer2-1/+3
In preparation for the Arria10 peripheral ECCs, add a register offset from the ECC base to index to the ECC enable register. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: devicetree@vger.kernel.org Cc: dinguyen@opensource.altera.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux@arm.linux.org.uk Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1459450087-24792-3-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-04-02EDAC, altera: Extract error inject operations to a struct fopsThor Thayer2-1/+5
In preparation for the Arria10 peripheral ECCs, extract the inject file operations because the Arria10 IRQ trigger mechanism is different than Cyclone5/Arria5 and Arria10 L2 cache. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: devicetree@vger.kernel.org Cc: dinguyen@opensource.altera.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux@arm.linux.org.uk Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1459450087-24792-2-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-03-29EDAC, altera: Add Arria10 L2 Cache ECC handlingThor Thayer2-0/+273
Add a private data structure for Arria10 L2 cache ECC and the probe function for it. The Arria10 ECC device IRQs are in a shared register so the ECC Manager parent/child relationship requires a different probe function. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: devicetree@vger.kernel.org Cc: dinguyen@opensource.altera.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux@arm.linux.org.uk Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1458576106-24505-8-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-03-29EDAC, altera: Add register offset for ECC Error InjectThor Thayer2-2/+8
In preparation for the Arria10 peripheral ECCs, add a register offset from the ECC base to the private data structure to index to the error injection register. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: devicetree@vger.kernel.org Cc: dinguyen@opensource.altera.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux@arm.linux.org.uk Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1458576106-24505-6-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-03-29EDAC, altera: Abstract ECC Enable Mask in check_deps()Thor Thayer1-2/+7
In preparation for the Arria10 peripheral ECCs, use the ECC Enable mask in place of hard coded masks in the check dependency functions. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: devicetree@vger.kernel.org Cc: dinguyen@opensource.altera.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux@arm.linux.org.uk Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1458576106-24505-5-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-03-29EDAC, altera: Remove platform device from check_deps()Thor Thayer2-6/+8
In preparation for the Arria10 peripheral ECCs, remove the platform device parameter from the check_deps() functions because it is not needed and makes the Arria10 check_deps() cleaner. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: devicetree@vger.kernel.org Cc: dinguyen@opensource.altera.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux@arm.linux.org.uk Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1458576106-24505-4-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-03-29EDAC, altera: Move device structs and defines to the headerThor Thayer2-43/+44
Move the device structs and defines to altera_edac.h in preparation for adding the Arria10 L2 cache ECC. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: devicetree@vger.kernel.org Cc: dinguyen@opensource.altera.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux@arm.linux.org.uk Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1458576106-24505-3-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-03-29EDAC, altera: Make L2C depend on L2x0 cache controllerThor Thayer1-3/+2
Make L2 cache depend instead of forcibly select the L2 cache support. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: devicetree@vger.kernel.org Cc: dinguyen@opensource.altera.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux@arm.linux.org.uk Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1458576106-24505-2-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-03-16Merge tag 'edac_for_4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds9-111/+616
Pull EDAC updates from Borislav Petkov: - Altera: L2 cache and On-Chip RAM support (Thor Thayer). - EDAC: Workqueue handling cleanups (Borislav Petkov). - Xgene: Register bus error handling (Loc Ho). - Misc small fixes. * tag 'edac_for_4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: ARM: socfpga: Enable OCRAM ECC on startup ARM: socfpga: Enable L2 cache ECC on startup ARM: dts: Add Altera L2 Cache and OCRAM EDAC entries EDAC, altera: Add Altera L2 cache and OCRAM support EDAC: Use edac_debugfs_remove_recursive() in edac_debugfs_exit() EDAC, mpc85xx: Silence unused variable warning EDAC: Cleanup/sync workqueue functions EDAC: Kill workqueue setup/teardown functions EDAC: Balance workqueue setup and teardown arm64: Update the APM X-Gene EDAC node with the RB register resource EDAC, xgene: Add missing SoC register bus error handling Documentation, EDAC: Update xgene binding for missing register bus EDAC, amd64_edac: Shift wrapping issue in f1x_get_norm_dct_addr()
2016-03-14Merge branch 'ras-core-for-linus' of ↵Linus Torvalds2-19/+342
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS updates from Ingo Molnar: "Various RAS updates: - AMD MCE support updates for future CPUs, fixes and 'SMCA' (Scalable MCA) error decoding support (Aravind Gopalakrishnan) - x86 memcpy_mcsafe() support, to enable smart(er) hardware error recovery in NVDIMM drivers, based on an extension of the x86 exception handling code. (Tony Luck)" * 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: EDAC/sb_edac: Fix computation of channel address x86/mm, x86/mce: Add memcpy_mcsafe() x86/mce/AMD: Document some functionality x86/mce: Clarify comments regarding deferred error x86/mce/AMD: Fix logic to obtain block address x86/mce/AMD, EDAC: Enable error decoding of Scalable MCA errors x86/mce: Move MCx_CONFIG MSR definitions x86/mce: Check for faults tagged in EXTABLE_CLASS_FAULT exception table entries x86/mm: Expand the exception table logic to allow new handling options x86/mce/AMD: Set MCAX Enable bit x86/mce/AMD: Carve out threshold block preparation x86/mce/AMD: Fix LVT offset configuration for thresholding x86/mce/AMD: Reduce number of blocks scanned per bank x86/mce/AMD: Do not perform shared bank check for future processors x86/mce: Fix order of AMD MCE init function call
2016-03-10EDAC/sb_edac: Fix computation of channel addressLuck, Tony1-16/+10
Large memory Haswell-EX systems with multiple DIMMs per channel were sometimes reporting the wrong DIMM. Found three problems: 1) Debug printouts for socket and channel interleave were not interpreting the register fields correctly. The socket interleave field is a 2^X value (0=1, 1=2, 2=4, 3=8). The channel interleave is X+1 (0=1, 1=2, 2=3. 3=4). 2) Actual use of the socket interleave value didn't interpret as 2^X 3) Conversion of address to channel address was complicated, and wrong. Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-edac@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-08x86/mce/AMD, EDAC: Enable error decoding of Scalable MCA errorsAravind Gopalakrishnan1-3/+332
For Scalable MCA enabled processors, errors are listed per IP block. And since it is not required for an IP to map to a particular bank, we need to use HWID and McaType values from the MCx_IPID register to figure out which IP a given bank represents. We also have a new bit (TCC) in the MCx_STATUS register to indicate Task context is corrupt. Add logic here to decode errors from all known IP blocks for Fam17h Model 00-0fh and to print TCC errors. [ Minor fixups. ] Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1457021458-2522-3-git-send-email-Aravind.Gopalakrishnan@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-07EDAC, sb_edac: Fix logic when computing DIMM sizes on Xeon PhiHubert Chrzaniuk1-1/+1
Correct a typo introduced by d0cdf9003140 ("EDAC, sb_edac: Add Knights Landing (Xeon Phi gen 2) support") As a result under some configurations DIMMs were not correctly recognized. Problem affects only Xeon Phi architecture. Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: lukasz.anaczkowski@intel.com Link: http://lkml.kernel.org/r/1457361045-26221-1-git-send-email-hubert.chrzaniuk@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-02-11EDAC, altera: Add Altera L2 cache and OCRAM supportThor Thayer3-8/+512
Add L2 Cache and On-Chip RAM EDAC support for the Altera SoCs. The SDRAM controller is using the Memory Controller model. Each type of ECC is individually configurable. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: devicetree@vger.kernel.org Cc: dinguyen@opensource.altera.com Cc: galak@codeaurora.org Cc: grant.likely@linaro.org Cc: ijc+devicetree@hellion.org.uk Cc: linux-arm-kernel@lists.infradead.org Cc: linux@arm.linux.org.uk Cc: linux-doc@vger.kernel.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: mark.rutland@arm.com Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: pawel.moll@arm.com Cc: robh+dt@kernel.org Link: http://lkml.kernel.org/r/1455132384-17108-1-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 22:22:26 +0000