summaryrefslogtreecommitdiffstats
path: root/drivers/edac
AgeCommit message (Collapse)AuthorFilesLines
2013-03-16EDAC: Merge mci.mem_is_per_rank with mci.csbasedMauro Carvalho Chehab3-5/+4
Both mci.mem_is_per_rank and mci.csbased denote the same thing: the memory controller is csrows based. Merge both fields into one. There's no need for the driver to actually fill it, as the core detects it by checking if one of the layers has the csrows type as part of the memory hierarchy: if (layers[i].type == EDAC_MC_LAYER_CHIP_SELECT) per_rank = true; Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de>
2013-03-16amd64_edac: Correct DIMM sizesMauro Carvalho Chehab2-15/+12
We were filling the csrow size with a wrong value. 16a528ee3975 ("EDAC: Fix csrow size reported in sysfs") tried to address the issue. It fixed the report with the old API but not with the new one. Correct it for the new API too. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> [ make it a per-csrow accounting regardless of ->channel_count ] Signed-off-by: Borislav Petkov <bp@suse.de>
2013-03-05EDAC: Make sysfs functions staticStephen Hemminger1-1/+1
Fixes lots of sparse warnings here. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Borislav Petkov <bp@suse.de>
2013-02-28Merge branch 'linux_next' of ↵Linus Torvalds12-84/+899
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac Pull EDAC fixes and ghes-edac from Mauro Carvalho Chehab: "For: - Some fixes at edac drivers (i7core_edac, sb_edac, i3200_edac); - error injection support for i5100, when EDAC debug is enabled; - fix edac when it is loaded builtin (early init for the subsystem); - a "Firmware First" EDAC driver, allowing ghes to report errors via EDAC (ghes-edac). With regards to ghes-edac, this fixes a longstanding BZ at Red Hat that happens with Nehalem and Sandy Bridge CPUs: when both GHES and i7core_edac or sb_edac are running, the error reports are unpredictable, as both BIOS and OS race to access the registers. With ghes-edac, the EDAC core will refuse to register any other concurrent memory error driver. This patchset moves the ghes struct definitions to a separate header file (include/acpi/ghes.h) and adds 3 hooks at apei/ghes.c to register/unregister and to report errors via ghes-edac. Those changes were acked by ghes driver maintainer (Huang)." * 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (30 commits) i5100_edac: convert to use simple_open() ghes_edac: fix to use list_for_each_entry_safe() when delete list items ghes_edac: Fix RAS tracing ghes_edac: Make it compliant with UEFI spec 2.3.1 ghes_edac: Improve driver's printk messages ghes_edac: Don't credit the same memory dimm twice ghes_edac: do a better job of filling EDAC DIMM info ghes_edac: add support for reporting errors via EDAC ghes_edac: Register at EDAC core the BIOS report ghes: add the needed hooks for EDAC error report ghes: move structures/enum to a header file edac: add support for error type "Info" edac: add support for raw error reports edac: reduce stack pressure by using a pre-allocated buffer edac: lock module owner to avoid error report conflicts edac: remove proc_name from mci structure edac: add a new memory layer type edac: initialize the core earlier edac: better report error conditions in debug mode i5100_edac: Remove two checkpatch warnings ...
2013-02-26i5100_edac: convert to use simple_open()Wei Yongjun1-7/+1
This removes an open coded simple_open() function and replaces file operations references to the function with simple_open() instead. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-26ghes_edac: fix to use list_for_each_entry_safe() when delete list itemsWei Yongjun1-2/+2
Since we will remove items off the list using list_del() we need to use a safe version of the list_for_each_entry() macro aptly named list_for_each_entry_safe(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-25ghes_edac: Fix RAS tracingMauro Carvalho Chehab1-0/+13
With the current version of CPER, there's no way to associate an error with the memory error. So, the error location in EDAC layers is unused. As CPER has its own idea about memory architectural layers, just output whatever is there inside the driver's detail at the RAS tracepoint. The EDAC location keeps untouched, in the case that, in some future, we could actually map the error into the dimm labels. Now, the error message: [ 72.396625] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0 [ 72.396627] {1}[Hardware Error]: APEI generic hardware error status [ 72.396628] {1}[Hardware Error]: severity: 2, corrected [ 72.396630] {1}[Hardware Error]: section: 0, severity: 2, corrected [ 72.396632] {1}[Hardware Error]: flags: 0x01 [ 72.396634] {1}[Hardware Error]: primary [ 72.396635] {1}[Hardware Error]: section_type: memory error [ 72.396637] {1}[Hardware Error]: error_status: 0x0000000000000400 [ 72.396638] {1}[Hardware Error]: node: 3 [ 72.396639] {1}[Hardware Error]: card: 0 [ 72.396640] {1}[Hardware Error]: module: 0 [ 72.396641] {1}[Hardware Error]: device: 0 [ 72.396643] {1}[Hardware Error]: error_type: 18, unknown [ 72.396666] EDAC MC0: 1 CE reserved error (18) on unknown label (node:3 card:0 module:0 page:0x0 offset:0x0 grain:0 syndrome:0x0 - status(0x0000000000000400): Storage error in DRAM memory) Is properly represented on the trace event: kworker/0:2-584 [000] .... 72.396657: mc_event: 1 Corrected error: reserved error (18) on unknown label (mc:0 location:-1:-1:-1 address:0x00000000 grain:1 syndrome:0x00000000 APEI location: node:3 card:0 module:0 status(0x0000000000000400): Storage error in DRAM memory) Tested on a 4 sockets E5-4650 Sandy Bridge machine. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-25ghes_edac: Make it compliant with UEFI spec 2.3.1Mauro Carvalho Chehab1-15/+180
The UEFI spec defines the memory error types ans the bits that validate each field on the memory error record, at Appendix N om items N.2.5 (Memory Error Section) and N.2.11 (Error Status). Make the error description compliant with it, only showing the valid fields. The EDAC error log is now properly reporting the error: [ 281.556854] mce: [Hardware Error]: Machine check events logged [ 281.557042] {2}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0 [ 281.557044] {2}[Hardware Error]: APEI generic hardware error status [ 281.557046] {2}[Hardware Error]: severity: 2, corrected [ 281.557048] {2}[Hardware Error]: section: 0, severity: 2, corrected [ 281.557050] {2}[Hardware Error]: flags: 0x01 [ 281.557052] {2}[Hardware Error]: primary [ 281.557053] {2}[Hardware Error]: section_type: memory error [ 281.557055] {2}[Hardware Error]: error_status: 0x0000000000000400 [ 281.557056] {2}[Hardware Error]: node: 3 [ 281.557057] {2}[Hardware Error]: card: 0 [ 281.557058] {2}[Hardware Error]: module: 1 [ 281.557059] {2}[Hardware Error]: device: 0 [ 281.557061] {2}[Hardware Error]: error_type: 18, unknown [ 281.557067] EDAC DEBUG: ghes_edac_report_mem_error: error validation_bits: 0x000040b9 [ 281.557084] EDAC MC0: 1 CE reserved error (18) on unknown label (node:3 card:0 module:1 page:0x0 offset:0x0 grain:0 syndrome:0x0 - status(0x0000000000000400): Storage error in DRAM memory) Tested on a 4 CPUs E5-4650 Sandy Bridge machine. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-25ghes_edac: Improve driver's printk messagesMauro Carvalho Chehab1-10/+26
Provide a better infrastructure for printk's inside the driver: - use edac_dbg() for debug messages; - standardize the usage of pr_info(); - provide warning about the risk of relying on this driver. While here, changes the size of a fake memory to 1 page. This is as good or as bad as 1000 pages, but it is easier for userspace to detect, as I don't expect that any machine implementing GHES would provide just 1 page available ;) Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Conflicts: drivers/edac/ghes_edac.c
2013-02-25ghes_edac: Don't credit the same memory dimm twiceMauro Carvalho Chehab1-4/+13
On my tests on a 4xE5-4650 CPU's system, the GHES EDAC driver is called twice. As the SMBIOS DMI enumeration call will seek for the entire DIMM sockets in the system, on this machine, equipped with 128 GB of RAM, the memory is displayed twice: +-----------------------+ | mc0 | mc1 | ----------+-----------------------+ memory45: | 8192 MB | 8192 MB | memory44: | 0 MB | 0 MB | ----------+-----------------------+ memory43: | 0 MB | 0 MB | memory42: | 8192 MB | 8192 MB | ----------+-----------------------+ memory41: | 0 MB | 0 MB | memory40: | 0 MB | 0 MB | ----------+-----------------------+ memory39: | 8192 MB | 8192 MB | memory38: | 0 MB | 0 MB | ----------+-----------------------+ memory37: | 0 MB | 0 MB | memory36: | 8192 MB | 8192 MB | ----------+-----------------------+ memory35: | 0 MB | 0 MB | memory34: | 0 MB | 0 MB | ----------+-----------------------+ memory33: | 8192 MB | 8192 MB | memory32: | 0 MB | 0 MB | ----------+-----------------------+ memory31: | 0 MB | 0 MB | memory30: | 8192 MB | 8192 MB | ----------+-----------------------+ memory29: | 0 MB | 0 MB | memory28: | 0 MB | 0 MB | ----------+-----------------------+ memory27: | 8192 MB | 8192 MB | memory26: | 0 MB | 0 MB | ----------+-----------------------+ memory25: | 0 MB | 0 MB | memory24: | 8192 MB | 8192 MB | ----------+-----------------------+ memory23: | 0 MB | 0 MB | memory22: | 0 MB | 0 MB | ----------+-----------------------+ memory21: | 8192 MB | 8192 MB | memory20: | 0 MB | 0 MB | ----------+-----------------------+ memory19: | 0 MB | 0 MB | memory18: | 8192 MB | 8192 MB | ----------+-----------------------+ memory17: | 0 MB | 0 MB | memory16: | 0 MB | 0 MB | ----------+-----------------------+ memory15: | 8192 MB | 8192 MB | memory14: | 0 MB | 0 MB | ----------+-----------------------+ memory13: | 0 MB | 0 MB | memory12: | 8192 MB | 8192 MB | ----------+-----------------------+ memory11: | 0 MB | 0 MB | memory10: | 0 MB | 0 MB | ----------+-----------------------+ memory9: | 8192 MB | 8192 MB | memory8: | 0 MB | 0 MB | ----------+-----------------------+ memory7: | 0 MB | 0 MB | memory6: | 8192 MB | 8192 MB | ----------+-----------------------+ memory5: | 0 MB | 0 MB | memory4: | 0 MB | 0 MB | ----------+-----------------------+ memory3: | 8192 MB | 8192 MB | memory2: | 0 MB | 0 MB | ----------+-----------------------+ memory1: | 0 MB | 0 MB | memory0: | 8192 MB | 8192 MB | ----------+-----------------------+ Total sum of 256 GB. As there's no reliable way to credit DIMMS to the right memory controller, just put everything on memory controller 0 (with should always exist). Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-25ghes_edac: do a better job of filling EDAC DIMM infoMauro Carvalho Chehab1-12/+180
Instead of just faking a random value for the DIMM data, get the information that it is available via DMI table. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-25ghes_edac: add support for reporting errors via EDACMauro Carvalho Chehab1-2/+54
Now that the EDAC core is capable of just forward the errors via the userspace API, add a report mechanism for the GHES errors. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-25ghes_edac: Register at EDAC core the BIOS reportMauro Carvalho Chehab3-0/+138
Register GHES at EDAC MC core, in order to avoid other drivers to also handle errors and mangle with error data. The edac core will warrant that just one driver will be used, so the first one to register (BIOS first) will be the one that will be reporting the hardware errors. For now, the EDAC driver does nothing but to register at the EDAC core, preventing the hardware-driven mechanism to interfere with GHES. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-21edac: add support for raw error reportsMauro Carvalho Chehab2-22/+47
That allows APEI GHES driver to report errors directly, using the EDAC error report API. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21edac: reduce stack pressure by using a pre-allocated bufferMauro Carvalho Chehab1-33/+48
The number of variables at the stack is too big. Reduces the stack usage by using a pre-allocated error buffer. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21edac: lock module owner to avoid error report conflictsMauro Carvalho Chehab1-4/+21
APEI GHES and i7core_edac/sb_edac currently can be loaded at the same time, but those are Highlander modules: "There can be only one". There are two reasons for that: 1) Each driver assumes that it is the only one registering at the EDAC core, as it is driver's responsibility to number the memory controllers, and all of them start from 0; 2) If BIOS is handling the memory errors, the OS can't also be doing it, as one will mangle with the other. So, we need to add an module owner's lock at the EDAC core, in order to avoid having two different modules handling memory errors at the same time. The best way for doing this lock seems to use the driver's name, as this is unique, and won't require changes on every driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21edac: add a new memory layer typeMauro Carvalho Chehab1-0/+1
There are some cases where the memory controller layout is completely hidden. This is the case of firmware-driven error code, like the one provided by GHES. Add a new layer to be used on such memory error report mechanisms. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21edac: initialize the core earlierMauro Carvalho Chehab1-1/+1
In order for it to work with it builtin, the EDAC core should be initialized earlier, otherwise the ghes_edac driver initializes before edac_mc_sysfs_init() being called: ... [ 4.998373] EDAC MC0: Giving out device to 'ghes_edac.c' 'ghes_edac': DEV ghes ... [ 4.998373] EDAC MC1: Giving out device to 'ghes_edac.c' 'ghes_edac': DEV ghes [ 6.519495] EDAC MC: Ver: 3.0.0 [ 6.523749] EDAC DEBUG: edac_mc_sysfs_init: device mc created The net result is that no EDAC sysfs nodes will appear. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21edac: better report error conditions in debug modeMauro Carvalho Chehab1-1/+6
It is hard to find what's wrong without a proper error report. Improve it, in debug mode. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21i5100_edac: Remove two checkpatch warningsMauro Carvalho Chehab1-4/+2
The last changeset introduced a few checkpatch warnings: WARNING: debugfs_remove_recursive(NULL) is safe this check is probably not required 261: FILE: drivers/edac/i5100_edac.c:1207: + if (priv->debugfs) + debugfs_remove_recursive(priv->debugfs); WARNING: debugfs_remove(NULL) is safe this check is probably not required 290: FILE: drivers/edac/i5100_edac.c:1250: + if (i5100_debugfs) + debugfs_remove(i5100_debugfs); Get rid of them. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21i5100_edac: connect fault injection to debugfs nodeNiklas Söderlund1-1/+70
Create a debugfs direcotry i5100_edac/mcX for each memory controller and add nodes to control how fault injection is preformed. After configuring an injection using inject_channel, inject_deviceptr1, inject_deviceptr2, inject_eccmask1, inject_eccmask2 and inject_hlinesel trigger the injection by writing anything to inject_enable. Example of a CE injection: echo 0 > /sys/kernel/debug/i5100_edac/mc0/inject_channel echo 1 > /sys/kernel/debug/i5100_edac/mc0/inject_hlinesel echo 61440 > /sys/kernel/debug/i5100_edac/mc0/inject_eccmask1 echo 1 > /sys/kernel/debug/i5100_edac/mc0/inject_enable Example of UE injection: echo 0 > /sys/kernel/debug/i5100_edac/mc0/inject_channel echo 2 > /sys/kernel/debug/i5100_edac/mc0/inject_hlinesel echo 65535 > /sys/kernel/debug/i5100_edac/mc0/inject_eccmask1 echo 65535 > /sys/kernel/debug/i5100_edac/mc0/inject_eccmask2 echo 17 > /sys/kernel/debug/i5100_edac/mc0/inject_deviceptr1 echo 0 > /sys/kernel/debug/i5100_edac/mc0/inject_deviceptr2 echo 1 > /sys/kernel/debug/i5100_edac/mc0/inject_enable Sometimes it is needed to enable the injection more then once (echo to the inject_enable node) for the injection to happen, I am not sure why. Signed-off-by: Niklas Söderlund <niklas.soderlund@ericsson.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21i5100_edac: add fault injection codeNiklas Söderlund1-0/+87
Add fault injection based on information datasheet for i5100, see 1. In addition to the i5100 datasheet some missing information on injection functions where found through experimentation and the i7300 datasheet, see 2. [1] Intel 5100 Memory Controller Hub Chipset Doc.Nr: 318378 http://www.intel.com/content/dam/doc/datasheet/5100- memory-controller-hub-chipset-datasheet.pdf [2] Intel 7300 Chipset MemoryController Hub (MCH) Doc.Nr: 318082 http://www.intel.com/assets/pdf/datasheet/318082.pdf Signed-off-by: Niklas Söderlund <niklas.soderlund@ericsson.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21i5100_edac: probe for device 19 function 0Niklas Söderlund1-1/+27
Probe and store the device handle for the device 19 function 0 during driver initialization. The device is used during fault injection. Signed-off-by: Niklas Söderlund <niklas.soderlund@ericsson.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21edac: only create sdram_scrub_rate where supportedMauro Carvalho Chehab1-10/+19
Currently, sdram_scrub_rate sysfs node is created even if the device doesn't support get/set the scub rate. Change the logic to only create this device node when the operation is supported. Reported-by: Felipe Balbi <balbi@ti.com> Acked-by: Borislav Petkov <bp@suse.de> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21i3200_edac: Fix the logic that detects filled memoriesMauro Carvalho Chehab1-9/+12
After running a series of tests on an HP DL320, filled with different memory sizes, it was noticed that, when filled with just one DIMM on such hardware, the driver wrongly detects twice the memory, and thinks that both channels 0 and 1 are filled. It seems to be partially caused by the BIOS and partially by the driver. The i3200_edac current logic would be working fine if the BIOS were disabling the unused second channel when just one DIMM is connected, in order to do power-saving, as recommended on this chipset's datasheet. However, the BIOS on this particular machine doesn't do it: [ 16.741421] EDAC DEBUG: how_many_channels: In dual channel mode [ 16.741424] EDAC DEBUG: how_many_channels: 2 DIMMS per channel enabled So, the driver were assuming that 2 channels are enabled (well, they are, but the second is unused). Combined with that, I found two issues at the logic that creates the EDAC data, that were failing when the two channels are not equally filled (AFAICT, that happens only when just 1 DIMM is plugged). The first one is that a 0 at DRB means that nothing is filled. The driver's logic, however, do some calculation with that. The second one is that the logic that fills the DIMM data currently assumes that both channels are equally filled. I tested the system already with the current configuration and my patch and it is now working fine. So, for a 2R single DIMM 2Gb memory at dimm slot 01 (channel 0), it is now displaying: [ 16.741406] EDAC DEBUG: i3200_get_drbs: drb[0][0] = 16, drb[1][0] = 0 [ 16.741410] EDAC DEBUG: i3200_get_drbs: drb[0][1] = 32, drb[1][1] = 0 [ 16.741413] EDAC DEBUG: i3200_get_drbs: drb[0][2] = 32, drb[1][2] = 0 [ 16.741416] EDAC DEBUG: i3200_get_drbs: drb[0][3] = 32, drb[1][3] = 0 ... [ 16.741896] EDAC DEBUG: i3200_probe1: csrow 0, channel 0, size = 1024 Mb [ 16.741899] EDAC DEBUG: i3200_probe1: csrow 1, channel 0, size = 1024 Mb and the corresponding sysfs nodes are now properly filled. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21i3200_edac: Add more debug to the driverMauro Carvalho Chehab1-2/+14
Currently, it is not possible to know, when debug is enabled, if the driver is using 2 DIMMS per channel mode or not. It is not possible to know the values of the drbs registers, used to identify the memory rank sizes. Add debug for both, as it helps to track issues on the driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-20Merge tag 'edac_3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds4-168/+120
Pull EDAC updates from Borislav Petkov: "Mostly AMD's side of EDAC. It is basically a new family enablement stuff: AMD F16h MCE decoding enablement from Jacob Shin. The rest is trivial cleanups." * tag 'edac_3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: mpc85xx_edac: Fix typo EDAC, MCE, AMD: Remove unneeded exports EDAC, MCE, AMD: Add MCE decoding support for Family 16h EDAC, MCE, AMD: Make MC2 decoding per-family amd64_edac: Remove dead code
2013-02-20Merge tag 'v3.8-rc7' into nextMauro Carvalho Chehab36-144/+802
Linux 3.8-rc7 * tag 'v3.8-rc7': (12052 commits) Linux 3.8-rc7 net: sctp: sctp_endpoint_free: zero out secret key data net: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree atm/iphase: rename fregt_t -> ffreg_t ARM: 7641/1: memory: fix broken mmap by ensuring TASK_UNMAPPED_BASE is aligned ARM: DMA mapping: fix bad atomic test ARM: realview: ensure that we have sufficient IRQs available ARM: GIC: fix GIC cpumask initialization net: usb: fix regression from FLAG_NOARP code l2tp: dont play with skb->truesize net: sctp: sctp_auth_key_put: use kzfree instead of kfree netback: correct netbk_tx_err to handle wrap around. xen/netback: free already allocated memory on failure in xen_netbk_get_requests xen/netback: don't leak pages on failure in xen_netbk_tx_check_gop. xen/netback: shutdown the ring if it contains garbage. drm/ttm: fix fence locking in ttm_buffer_object_transfer, 2nd try virtio_console: Don't access uninitialized data. net: qmi_wwan: add more Huawei devices, including E320 net: cdc_ncm: add another Huawei vendor specific device ipv6/ip6_gre: fix error case handling in ip6gre_tunnel_xmit() ...
2013-02-19Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds2-61/+60
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform changes from Ingo Molnar: - Support for the Technologic Systems TS-5500 platform, by Vivien Didelot - Improved NUMA support on AMD systems: Add support for federated systems where multiple memory controllers can exist and see each other over multiple PCI domains. This basically means that AMD node ids can be more than 8 now and the code handling this is taught to incorporate PCI domain into those IDs. - Support for the Goldfish virtual Android emulator, by Jun Nakajima, Intel, Google, et al. - Misc fixlets. * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Add TS-5500 platform support x86/srat: Simplify memory affinity init error handling x86/apb/timer: Remove unnecessary "if" goldfish: platform device for x86 amd64_edac: Fix type usage in NB IDs and memory ranges amd64_edac: Fix PCI function lookup x86, AMD, NB: Use u16 for northbridge IDs in amd_get_nb_id x86, AMD, NB: Add multi-domain support
2013-02-10mpc85xx_edac: Fix typoBaruch Siach1-2/+2
Correct typos. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Cc: Dave Jiang <djiang@mvista.com> Signed-off-by: Borislav Petkov <bp@suse.de>
2013-01-30EDAC: Fix kcalloc argument orderJoe Perches1-3/+3
First number, then size. Signed-off-by: Joe Perches <joe@perches.com> Cc: <stable@vger.kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de>
2013-01-30EDAC: Test correct variable in ->store functionDan Carpenter1-1/+1
We're testing for ->show but calling ->store(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Borislav Petkov <bp@suse.de>
2013-01-22EDAC, MCE, AMD: Remove unneeded exportsBorislav Petkov2-18/+8
Initially, those strings describing different parts of an MCE message were shared with amd64_edac and were therefore exported to modules. However, all except pp_msgs are used only in one place right now so hide them and make them static. No functionality change. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Borislav Petkov <bp@alien8.de>
2013-01-22EDAC, MCE, AMD: Add MCE decoding support for Family 16hJacob Shin2-17/+81
Add MCE decoding logic for AMD Family 16h processors. Boris: - drop unneeded uu_msgs export - exit early in cat_mc1_mce and save us an indentation level Signed-off-by: Jacob Shin <jacob.shin@amd.com> Signed-off-by: Borislav Petkov <bp@alien8.de>
2013-01-22EDAC, MCE, AMD: Make MC2 decoding per-familyJacob Shin2-27/+30
Currently only AMD Family 15h processors have special handling for MC2 errors. Since upcoming Family 16h will also need unique handling, let's make MC2 handling part of amd_decoder_ops. Signed-off-by: Jacob Shin <jacob.shin@amd.com> Signed-off-by: Borislav Petkov <bp@alien8.de>
2013-01-22amd64_edac: Remove dead codeBorislav Petkov1-105/+0
5e2af0c09e60 ("edac: Don't initialize csrow's first_page & friends when not needed") removed useless initialization of variables but left in the functions which did that. They're unused now so drop them. Signed-off-by: Borislav Petkov <bp@alien8.de>
2013-01-17drivers/edac: remove depends on CONFIG_EXPERIMENTALKees Cook1-2/+2
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-10amd64_edac: Fix type usage in NB IDs and memory rangesDaniel J Blueman2-16/+16
Use appropriate types for northbridge IDs and memory ranges. Mark immutable data const and keep within compilation unit on related structures. Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com> Link: http://lkml.kernel.org/r/1354265060-22956-2-git-send-email-daniel@numascale-asia.com [Boris: Drop arg change to node_to_amd_nb] Signed-off-by: Borislav Petkov <bp@alien8.de>
2013-01-10amd64_edac: Fix PCI function lookupDaniel J Blueman1-34/+38
Fix locating sibling memory controller PCI functions by using the correct PCI domain and use a northbridge descriptor only if found. We need to at least warn if it wasn't found so that it gets fixed and we don't go off with wrong results. Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com> Link: http://lkml.kernel.org/r/1354265060-22956-1-git-send-email-daniel@numascale-asia.com [Boris: remove wrong comment, sanitize code and warn if NB desc lookup fails] Signed-off-by: Borislav Petkov <bp@alien8.de>
2013-01-10x86, AMD, NB: Use u16 for northbridge IDs in amd_get_nb_idDaniel J Blueman1-2/+3
Change amd_get_nb_id to return u16 to support >255 memory controllers, and related consistency fixes. Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com> Link: http://lkml.kernel.org/r/1353997932-8475-2-git-send-email-daniel@numascale-asia.com Signed-off-by: Borislav Petkov <bp@alien8.de>
2013-01-10x86, AMD, NB: Add multi-domain supportDaniel J Blueman2-9/+3
Fix get_node_id to match northbridge IDs from the array of detected ones, allowing multi-server support such as with Numascale's NumaConnect, renaming to 'amd_get_node_id' for consistency. Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com> Link: http://lkml.kernel.org/r/1353997932-8475-1-git-send-email-daniel@numascale-asia.com [Boris: shorten lines to fit 80 cols] Signed-off-by: Borislav Petkov <bp@alien8.de>
2013-01-09Merge tag 'edac_fixes_for_3.8' of ↵Linus Torvalds2-18/+9
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp Pull EDAC fixes from Borislav Petkov: "Two error path fixes causing a crash and a Kconfig fix for an issue which spilled all EDAC suboptions into the 'Device Drivers' menu." * tag 'edac_fixes_for_3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC: Cleanup device deregistering path EDAC: Fix EDAC Kconfig menu EDAC: Fix kernel panic on module unloading
2013-01-07EDAC: Cleanup device deregistering pathLans Zhang1-12/+6
Use device_unregister to replace put_device + device_del for cleanup, and fix the potential use after free. Signed-off-by: Lans Zhang <jia.zhang@windriver.com> Signed-off-by: Borislav Petkov <bp@alien8.de>
2013-01-07EDAC: Fix EDAC Kconfig menuBorislav Petkov1-5/+3
After f65aad41772f("MIPS: Cavium: Add EDAC support."), when entering the "Device Drivers" toplevel menu in menuconfig, the suboptions behind EDAC appeared merged with the rest of the device drivers types. This was because the menuconfig option EDAC is querying an EDAC_SUPPORT Kconfig bool which was defined after the menu definition. When pushing EDAC_SUPPORT up, before the menu definition, the variable is defined earlier and the above menuconfig artifact doesn't happen. Drop a useless menuconfig comment while at it. Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Borislav Petkov <bp@alien8.de>
2013-01-07EDAC: Fix kernel panic on module unloadingKonstantin Khlebnikov1-2/+1
This patch fixes use-after-free and double-free bugs in edac_mc_sysfs_exit(). mci_pdev has single reference and put_device() calls mc_attr_release() which calls kfree(). The following device_del() works with already released memory. An another kfree() in edac_mc_sysfs_exit() releses the same memory again. Great. Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: stable@vger.kernel.org # 3.[67] Cc: Denis Kirjanov <kirjanov@gmail.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Link: http://lkml.kernel.org/r/20121214110310.11019.21098.stgit@zurg Signed-off-by: Borislav Petkov <bp@alien8.de>
2013-01-03Drivers: edac: remove __dev* attributes.Greg Kroah-Hartman31-128/+111
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Doug Thompson <dougthompson@xmission.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Daney <david.daney@cavium.com> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Olof Johansson <olof@lixom.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-21i7core_edac: fix kernel crash on unloading i7core_edac.Lans Zhang1-1/+1
It is easy to trigger this crash on 3.7.0: root@intel_westmere_ep-3:~# modprobe -r i7core_edac EDAC PCI: Removed device 0 for i7core_edac EDAC PCI controller: DEV 0000:fe:03.0 EDAC MC: Removed device 1 for i7core_edac.c i7 core #1: DEV 0000:fe:03.0 EDAC PCI: Removed device 1 for i7core_edac EDAC PCI controller: DEV 0000:ff:03.0 EDAC MC: Removed device 0 for i7core_edac.c i7 core #0: DEV 0000:ff:03.0 BUG: unable to handle kernel NULL pointer dereference at 0000000000000110 IP: [<ffffffff82069ee9>] __blocking_notifier_call_chain+0x29/0x80 PGD 1eaae7067 PUD 1e96e4067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: minix acpi_cpufreq freq_table mperf ioatdma processor edac_core(-) iTCO_wdt coretemp evdev hwmon lpc_ich dca mfd_core crc32c_intel ioapic [last unloaded: i7core_edac] CPU 3 Pid: 1268, comm: modprobe Not tainted 3.7.0-WR5.0.1.0_standard+ #30 Intel Corporation S5520HC/S5520HC RIP: 0010:[<ffffffff82069ee9>] [<ffffffff82069ee9>] __blocking_notifier_call_chain+0x29/0x80 RSP: 0018:ffff8801eb12de28 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000000f0 RCX: 00000000ffffffff RDX: ffff88012b452800 RSI: 0000000000000002 RDI: 00000000000000f0 RBP: ffff8801eb12de68 R08: 0000000000000000 R09: ffffea0004ad1118 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8801eb12dee8 R14: ffff88012b452800 R15: 000000000060e518 FS: 00007f9ea95a9700(0000) GS:ffff8801efc20000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000110 CR3: 00000001262f1000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 1268, threadinfo ffff8801eb12c000, task ffff8801e8421690) Stack: ffff88012c802a00 ffff88012b445ec0 ffff88012c802300 ffff88012b452800 0000000000000000 ffff8801eb12dee8 000000000060e080 000000000060e518 ffff8801eb12de78 ffffffff82069f56 ffff8801eb12dea8 ffffffff824ead7c Call Trace: [<ffffffff82069f56>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff824ead7c>] device_del+0x3c/0x1d0 [<ffffffffa00095a8>] edac_mc_sysfs_exit+0x1c/0x2f [edac_core] [<ffffffffa000961c>] edac_exit+0x4f/0x56 [edac_core] [<ffffffff820a3d2a>] sys_delete_module+0x17a/0x240 [<ffffffff8212da7c>] ? vm_munmap+0x5c/0x80 [<ffffffff82877682>] system_call_fastpath+0x16/0x1b Code: 90 90 55 48 89 e5 48 83 ec 40 48 89 5d d8 4c 89 65 e0 4c 89 6d e8 4c 89 75 f0 4c 89 7d f8 66 66 66 66 90 31 c0 49 89 d6 48 89 fb <48> 8b 57 20 49 89 f5 41 89 cf 4c 8d 67 20 48 85 d2 74 2c 4c 89 RIP [<ffffffff82069ee9>] __blocking_notifier_call_chain+0x29/0x80 RSP <ffff8801eb12de28> CR2: 0000000000000110 ---[ end trace b69acf12ccad1c0d ]--- Usually, edac_subsys is grabbed one time by pci at initialization. But edac_subsys may be released several times if multiple pci MCs exist. The fix just makes the operations balanced. Signed-off-by: Lans Zhang <jia.zhang@windriver.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21i7core_edac: fix erroneous size of static arrayNiklas Söderlund1-4/+4
Remove size from lookup arrays and mark them as const. Reviewed-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Niklas Söderlund <niso@kth.se> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21sb_edac: add a missing /n on a debug messageMauro Carvalho Chehab1-1/+1
[ 17.024963] EDAC DEBUG: get_memory_layout: TOHM: 132.160 GB (0x0000002043ffffff)<7>[ 17.024971] EDAC DEBUG: get_memory_layout: SAD#0 DRAM up to 33.792 GB (0x0000000840000000) Interleave: 8:6 reg=0x000083c3 Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>