summaryrefslogtreecommitdiffstats
path: root/drivers/edac
AgeCommit message (Collapse)AuthorFilesLines
2015-01-30EDAC, mv64x60_edac: Fix an error code in probe()Dan Carpenter1-1/+2
If edac_mc_add_mc() fails then we should preserve the error code, but instead the current code returns success. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: http://lkml.kernel.org/r/20150128191351.GC10259@mwanda Signed-off-by: Borislav Petkov <bp@suse.de>
2015-01-30EDAC: edac_mc_sysfs: Make stuff staticBorislav Petkov1-11/+11
Fix sparse warnings. Signed-off-by: Borislav Petkov <bp@suse.de>
2015-01-30EDAC: Fix the leak of mci->bus->name when bus_register failsJunjie Mao1-13/+16
Also use goto labels for all failure paths in edac_create_sysfs_mci_device and update meaningless labels. Signed-off-by: Junjie Mao <junjie.mao@hotmail.com> Link: http://lkml.kernel.org/r/BLU436-SMTP25291B6B612942A212AEBFE95300@phx.gbl [ Boris: Use ! for 0 checks and add newlines for less crammed code. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2015-01-12edac: i5100_edac: Remove unused i5100_recmema_dm_buf_idRickard Strandqvist1-5/+0
Remove the function i5100_recmema_dm_buf_id() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Link: http://lkml.kernel.org/r/1420999030-21770-1-git-send-email-rickard_strandqvist@spectrumdigital.se Signed-off-by: Borislav Petkov <bp@suse.de>
2015-01-07EDAC, synps: Add EDAC support for zynq ddr ecc controllerPunnaiah Choudary Kalluri3-0/+543
Add EDAC support for ecc errors reporting on the synopsys ddr controller. The ddr ecc controller corrects single bit errors and detects double bit errors. Selected important-ish notes from the changelog: - I have not taken care of spliting synps_edac_geterror_info function as it adds additional indentation levels and moreover the existing changes were made as part of the v2 review comments - Removed dt binding info as already there is a binding info available under memorycontroller. so, updated ecc info there. - Shortened the prefix "sysnopsys" to "synps" Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com> Link: http://lkml.kernel.org/r/a728a8d4678f4dbf9de189a480297c3d@BY2FFO11FD034.protection.gbl [ Boris: massage commit message. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2015-01-02mpc85xx_edac: Fix a typo in commentsAlexander Kuleshov2-2/+2
s/kenel/kernel/g [ Boris: massage commit message a bit ] Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Cc: Johannes Thumshirn <johannes.thumshirn@men.de> Link: http://lkml.kernel.org/r/1419749085-7128-1-git-send-email-kuleshovmail@gmail.com Signed-off-by: Borislav Petkov <bp@suse.de>
2014-12-21EDAC, mce_amd_inj: Fix sparse non static symbol warningWei Yongjun1-1/+1
Fixes the following sparse warnings: drivers/edac/mce_amd_inj.c:204:3: warning: symbol 'dfs_fls' was not declared. Should it be static? Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Link: http://lkml.kernel.org/r/1418087095-14174-1-git-send-email-weiyj_lk@163.com Signed-off-by: Borislav Petkov <bp@suse.de>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds4-5/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-11Merge tag 'edac/v3.19-rc1' of ↵Linus Torvalds2-28/+182
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac Pull edac updates from Mauro Carvalho Chehab: - Broadwell-DE support on sb-edac driver - Some fixes at sb-edac driver * tag 'edac/v3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: sb_edac: Fix typo computing number of banks sb_edac: Add support for Broadwell-DE processor sb_edac: Fix discovery of top-of-low-memory for Haswell sb_edac: Fix erroneous bytes->gigabytes conversion sb_edac: Fix off-by-one error in number of channels
2014-12-10Merge branch 'x86-ras-for-linus' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 RAS update from Ingo Molnar: "The biggest change in this cycle is better support for UCNA (UnCorrected No Action) events: "Handle all uncorrected error reports in the same way (soft offline the page). We used to only do that for SRAO (software recoverable action optional) machine checks, but it makes sense to also do it for UCNA (UnCorrected No Action) logs found by CMCI or polling." plus various x86 MCE handling updates and fixes" * 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Spell "panicked" correctly x86, mce: Support memory error recovery for both UCNA and Deferred error in machine_check_poll x86, mce, severity: Extend the the mce_severity mechanism to handle UCNA/DEFERRED error x86, MCE, AMD: Assign interrupt handler only when bank supports it x86, MCE, AMD: Drop software-defined bank in error thresholding x86, MCE, AMD: Move invariant code out from loop body x86, MCE, AMD: Correct thresholding error logging x86, MCE, AMD: Use macros to compute bank MSRs RAS, HWPOISON: Fix wrong error recovery status GHES: Make ghes_estatus_caches static APEI, GHES: Cleanup unnecessary function for lockless list
2014-12-08Merge tag 'edac_for_3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds15-267/+439
Pull EDAC updates from Borislav Petkov: "EDAC updates all over the place: - Enablement for AMD F15h models 0x60 CPUs. Most notably DDR4 RAM support. Out of tree stuff is adding the required PCI IDs. From Aravind Gopalakrishnan. - Enable amd64_edac for 32-bit due to popular demand. From Tomasz Pala. - Convert the AMD MCE injection module to debugfs, where it belongs. - Misc EDAC cleanups" * tag 'edac_for_3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, MCE, AMD: Correct formatting of decoded text EDAC, mce_amd_inj: Add an injector function EDAC, mce_amd_inj: Add hw-injection attributes EDAC, mce_amd_inj: Enable direct writes to MCE MSRs EDAC, mce_amd_inj: Convert mce_amd_inj module to debugfs EDAC: Delete unnecessary check before calling pci_dev_put() EDAC, pci_sysfs: remove unneccessary ifdef around entire file ghes_edac: Use snprintf() to silence a static checker warning amd64_edac: Build module on x86-32 EDAC, MCE, AMD: Add decoding table for MC6 xec amd64_edac: Add F15h M60h support {mv64x60,ppc4xx}_edac,: Remove deprecated IRQF_DISABLED EDAC: Sync memory types and names EDAC: Add DDR3 LRDIMM entries to edac_mem_types x86, amd_nb: Add device IDs to NB tables for F15h M60h pci_ids: Add PCI device IDs for F15h M60h
2014-12-02sb_edac: Fix typo computing number of banksTony Luck1-1/+1
Code will always think there are 16 banks because of a typo Reported-by: Misha Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-02sb_edac: Add support for Broadwell-DE processorTony Luck1-6/+157
Broadwell-DE is the microserver version of next generation Xeon processors. A whole bunch of new PCIe device ids, but otherwise pretty much the same as Haswell. Acked-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-02sb_edac: Fix discovery of top-of-low-memory for HaswellTony Luck1-2/+3
Haswell moved the TOLM/TOHM registers to a different device and offset. The sb_edac driver accounted for the change of device, but not for the new offset. There was also a typo in the constant to fill in the low 26 bits (was 0x1ffffff, should be 0x3ffffff). This resulted in a bogus value for the top of low memory: EDAC DEBUG: get_memory_layout: TOLM: 0.032 GB (0x0000000001ffffff) which would result in EDAC refusing to translate addresses for errors above the bogus value and below 4GB: sbridge MC3: HANDLING MCE MEMORY ERROR sbridge MC3: CPU 0: Machine Check Event: 0 Bank 7: 8c00004000010090 sbridge MC3: TSC 0 sbridge MC3: ADDR 2000000 sbridge MC3: MISC 523eac86 sbridge MC3: PROCESSOR 0:306f3 TIME 1414600951 SOCKET 0 APIC 0 MC3: 1 CE Error at TOLM area, on addr 0x02000000 on any memory ( page:0x0 offset:0x0 grain:32 syndrome:0x0) With the fix we see the correct TOLM value: DEBUG: get_memory_layout: TOLM: 2.048 GB (0x000000007fffffff) and we decode address 2000000 correctly: sbridge MC3: HANDLING MCE MEMORY ERROR sbridge MC3: CPU 0: Machine Check Event: 0 Bank 7: 8c00004000010090 sbridge MC3: TSC 0 sbridge MC3: ADDR 2000000 sbridge MC3: MISC 523e1086 sbridge MC3: PROCESSOR 0:306f3 TIME 1414601319 SOCKET 0 APIC 0 DEBUG: get_memory_error_data: SAD interleave package: 0 = CPU socket 0, HA 0, shiftup: 0 DEBUG: get_memory_error_data: TAD#0: address 0x0000000002000000 < 0x000000007fffffff, socket interleave 1, channel interleave 4 (offset 0x00000000), index 0, base ch: 0, ch mask: 0x01 DEBUG: get_memory_error_data: RIR#0, limit: 4.095 GB (0x00000000ffffffff), way: 1 DEBUG: get_memory_error_data: RIR#0: channel address 0x00200000 < 0xffffffff, RIR interleave 0, index 0 DEBUG: sbridge_mce_output_error: area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:0 MC3: 1 CE memory read error on CPU_SrcID#0_Channel#0_DIMM#0 (channel:0 slot:0 page:0x2000 offset:0x0 grain:32 syndrome:0x0 - area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:0) Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-02sb_edac: Fix erroneous bytes->gigabytes conversionJim Snow1-18/+20
Signed-off-by: Jim Snow <jim.snow@intel.com> Signed-off-by: Lukasz Anaczkowski <lukasz.anaczkowski@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-02sb_edac: Fix off-by-one error in number of channelsJim Snow1-1/+1
This prevented edac sysfs code from properly handling 6 channels per memory controller. Signed-off-by: Jim Snow <jim.snow@intel.com> Signed-off-by: Lukasz Anaczkowski <lukasz.anaczkowski@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-25EDAC, MCE, AMD: Correct formatting of decoded textBorislav Petkov1-3/+3
Write out MCx_ADDR into the more humanly readable "MCx Error Address" and remove double colon in the output. Cc: Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de>
2014-11-25EDAC, mce_amd_inj: Add an injector functionBorislav Petkov1-2/+51
Selectively inject either a real MCE or a sw-only version which exercises the decoding path only. The hardware-injected MCE triggers a machine check exception (#MC) so that the MCE handler can be bothered to do something too. Signed-off-by: Borislav Petkov <bp@suse.de>
2014-11-25EDAC, mce_amd_inj: Add hw-injection attributesBorislav Petkov1-0/+40
Expose struct mce->inject_flags. Signed-off-by: Borislav Petkov <bp@suse.de>
2014-11-25EDAC, mce_amd_inj: Enable direct writes to MCE MSRsBorislav Petkov1-0/+24
Normally, writing those causes a #GP but HWCR[McStatusWrEn] controls that. Provide a knob. Signed-off-by: Borislav Petkov <bp@suse.de>
2014-11-25EDAC, mce_amd_inj: Convert mce_amd_inj module to debugfsBorislav Petkov2-107/+83
This module's interface belongs in debugfs, not in sysfs. Signed-off-by: Borislav Petkov <bp@suse.de>
2014-11-19x86, mce, severity: Extend the the mce_severity mechanism to handle ↵Chen Yucong1-3/+0
UCNA/DEFERRED error Until now, the mce_severity mechanism can only identify the severity of UCNA error as MCE_KEEP_SEVERITY. Meanwhile, it is not able to filter out DEFERRED error for AMD platform. This patch extends the mce_severity mechanism for handling UCNA/DEFERRED error. In order to do this, the patch introduces a new severity level - MCE_UCNA/DEFERRED_SEVERITY. In addition, mce_severity is specific to machine check exception, and it will check MCIP/EIPV/RIPV bits. In order to use mce_severity mechanism in non-exception context, the patch also introduces a new argument (is_excp) for mce_severity. `is_excp' is used to explicitly specify the calling context of mce_severity. Reviewed-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Signed-off-by: Chen Yucong <slaoub@gmail.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2014-11-19EDAC: Delete unnecessary check before calling pci_dev_put()Markus Elfring4-8/+4
The pci_dev_put() function tests whether its argument is NULL and then returns immediately. Thus the test before the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Link: http://lkml.kernel.org/r/546CB20D.4070808@users.sourceforge.net [ Boris: commit message. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2014-11-11EDAC, pci_sysfs: remove unneccessary ifdef around entire fileAndreas Ruprecht2-6/+1
The file edac_pci_sysfs.c is dependent on CONFIG_PCI. This is already modelled in the Makefile, but edac_pci_sysfs.o is still contained in the list of files compiled even without CONFIG_PCI. This change removes edac_pci_sysfs.o from the list of built objects when not having CONFIG_PCI enabled and removes the then-unnecessary ifdef from the source file. Signed-off-by: Andreas Ruprecht <rupran@einserver.de> Link: http://lkml.kernel.org/r/1407697803-3837-1-git-send-email-rupran@einserver.de Signed-off-by: Borislav Petkov <bp@suse.de>
2014-11-11ghes_edac: Use snprintf() to silence a static checker warningDan Carpenter1-2/+2
My static checker complains because the "e->location" has up to 256 characters but we are copying it into the "pvt->detail_location" which only has space for 240 characters. That's not counting the surrounding text and the "e->other_detail" string which can be over 80 characters long. I am not familiar with this code but presumably it normally works. Let's add a limit though for safety. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Link: http://lkml.kernel.org/r/20140801082514.GD28869@mwanda Signed-off-by: Borislav Petkov <bp@suse.de>
2014-11-05amd64_edac: Build module on x86-32Tomasz Pala2-3/+8
By popular demand, enable amd64_edac on 32-bit too. Boris: - update Kconfig text. - add a warning on load which states that 32-bit configurations are unsupported. Signed-off-by: Tomasz Pala <gotar@polanet.pl> Link: http://lkml.kernel.org/r/20141102102212.GA7034@polanet.pl Signed-off-by: Borislav Petkov <bp@suse.de>
2014-11-04EDAC, MCE, AMD: Add decoding table for MC6 xecAravind Gopalakrishnan1-30/+11
Extended error code meanings are tabulated for other banks. Extend that tradition for MC6 too. Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Link: http://lkml.kernel.org/r/1415122868-10969-1-git-send-email-aravind.gopalakrishnan@amd.com Signed-off-by: Borislav Petkov <bp@suse.de>
2014-11-03Merge branch 'platform/remove_owner' of ↵Greg Kroah-Hartman4-5/+0
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next Remove all .owner fields from platform drivers
2014-10-30amd64_edac: Add F15h M60h supportAravind Gopalakrishnan2-82/+188
This patch adds support for ECC error decoding for F15h M60h processor. Aside from the usual changes, the patch adds support for some new features in the processor: - DDR4(unbuffered, registered); LRDIMM DDR3 support - relevant debug messages have been modified/added to report these memory types - new dbam_to_cs mappers - if (F15h M60h && LRDIMM); we need a 'multiplier' value to find cs_size. This multiplier value is obtained from the per-dimm DCSM register. So, change the interface to accept a 'cs_mask_nr' value to facilitate this calculation - switch-casing determine_memory_type() - done to cleanse the function of too many if-else statements and improve readability - This is now called early in read_mc_regs() to cache dram_type Misc cleanup: - amd64_pci_table[] is condensed by using PCI_VDEVICE macro. Testing details: Tested the patch by injecting 'ECC' type errors using mce_amd_inj and error decoding works fine. Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Link: http://lkml.kernel.org/r/1414617483-4941-1-git-send-email-Aravind.Gopalakrishnan@amd.com [ Boris: determine_memory_type() cleanups ] Signed-off-by: Borislav Petkov <bp@suse.de>
2014-10-22e7xxx_edac: Report CE events properlyJason Baron1-1/+1
Fix CE event being reported as HW_EVENT_ERR_UNCORRECTED. Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/e6dd616f2cd51583a7e77af6f639b86313c74144.1413405053.git.jbaron@akamai.com Signed-off-by: Borislav Petkov <bp@suse.de>
2014-10-22cpc925_edac: Report UE events properlyJason Baron1-1/+1
Fix UE event being reported as HW_EVENT_ERR_CORRECTED. Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/8beb13803500076fef827eab33d523e355d83759.1413405053.git.jbaron@akamai.com Signed-off-by: Borislav Petkov <bp@suse.de>
2014-10-22i82860_edac: Report CE events properlyJason Baron1-1/+1
Fix CE event being reported as HW_EVENT_ERR_UNCORRECTED. Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/7aee8e244a32ff86b399a8f966c4aae70296aae0.1413405053.git.jbaron@akamai.com Signed-off-by: Borislav Petkov <bp@suse.de>
2014-10-22i3200_edac: Report CE events properlyJason Baron1-2/+2
Fix CE event being reported as HW_EVENT_ERR_UNCORRECTED. Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/d02465b4f30314b390c12c061502eda5e9d29c52.1413405053.git.jbaron@akamai.com Signed-off-by: Borislav Petkov <bp@suse.de>
2014-10-20edac: drop owner assignment from platform_driversWolfram Sang4-5/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20{mv64x60,ppc4xx}_edac,: Remove deprecated IRQF_DISABLEDMichael Opdenacker2-6/+6
It's a NOOP since 2.6.35. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Link: http://lkml.kernel.org/r/1412159043-7348-1-git-send-email-michael.opdenacker@free-electrons.com Signed-off-by: Borislav Petkov <bp@suse.de>
2014-10-20EDAC: Sync memory types and namesBorislav Petkov1-23/+20
Make keeping the sync between the mem_types enum and the actual string names simpler by using designated initializers. Signed-off-by: Borislav Petkov <bp@suse.de>
2014-10-20EDAC: Add DDR3 LRDIMM entries to edac_mem_typesAravind Gopalakrishnan1-0/+3
F15hM60h adds support for DDR4 and DDR3 LRDIMMs. Add them here. Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Link: http://lkml.kernel.org/r/1411070218-10258-1-git-send-email-Aravind.Gopalakrishnan@amd.com [ Boris: improve comments. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2014-10-10Merge tag 'edac/v3.18-rc1' of ↵Linus Torvalds1-33/+7
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac Pull edac updates from Mauro Carvalho Chehab: "Nothing really exiting here: just one bug fix at sb_edac, and some changes to allow other drivers to use some shared PCI addresses" * tag 'edac/v3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: sb_edac: Claim a different PCI device Move Intel SNB device ids from sb_edac to pci_ids.h sb_edac: avoid INTERNAL ERROR message in EDAC with unspecified channel
2014-10-08Merge tag 'drivers-for-linus' of ↵Linus Torvalds3-0/+421
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "These are changes for drivers that are intimately tied to some SoC and for some reason could not get merged through the respective subsystem maintainer tree. Most of the new code is for the Keystone Navigator driver, which is new base support that is going to be needed for their hardware accelerated network driver and other units. Most of the commits are for moving old code around from at91 and omap for things that are done in device drivers nowadays. - at91: move reset, poweroff, memory and clocksource code into drivers directories - socfpga: add edac driver (through arm-soc, as requested by Boris) - omap: move omap-intc code to drivers/irqchip - sunxi: added an RTC driver for sun6i - omap: mailbox driver related changes - keystone: support for the "Navigator" component - versatile: new reboot, led and soc drivers" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (92 commits) bus: arm-ccn: Fix spurious warning message leds: add device tree bindings for register bit LEDs soc: add driver for the ARM RealView power: reset: driver for the Versatile syscon reboot leds: add a driver for syscon-based LEDs drivers/soc: ti: fix build break with modules MAINTAINERS: Add Keystone Multicore Navigator drivers entry soc: ti: add Keystone Navigator DMA support Documentation: dt: soc: add Keystone Navigator DMA bindings soc: ti: add Keystone Navigator QMSS driver Documentation: dt: soc: add Keystone Navigator QMSS bindings rtc: sunxi: Depend on platforms sun4i/sun7i that actually have the rtc rtc: sun6i: Add sun6i RTC driver irqchip: omap-intc: remove unnecessary comments irqchip: omap-intc: correct maximum number or MIR registers irqchip: omap-intc: enable TURBO idle mode irqchip: omap-intc: enable IP protection irqchip: omap-intc: remove unnecesary of_address_to_resource() call irqchip: omap-intc: comment style cleanup irqchip: omap-intc: minor improvement to omap_irq_pending() ...
2014-10-08sb_edac: Claim a different PCI deviceAndy Lutomirski1-1/+1
sb_edac controls a large number of different PCI functions. Rather than registering as a normal PCI driver for all of them, it registers for just one so that it gets probed and, at probe time, it looks for all the others. Coincidentally, the device it registers for also contains the SMBUS registers, so the PCI core will refuse to probe both sb_edac and a future iMC SMBUS driver. The drivers don't actually conflict, so just change sb_edac's device table to probe a different device. An alternative fix would be to merge the two drivers, but sb_edac will also refuse to load on non-ECC systems, whereas i2c_imc would still be useful without ECC. The only user-visible change should be that sb_edac appears to bind a different device. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Cc: Rui Wang <ruiv.wang@gmail.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-08Move Intel SNB device ids from sb_edac to pci_ids.hAndy Lutomirski1-30/+0
The i2c_imc driver will use two of them, and moving only part of the list seems messier. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-08sb_edac: avoid INTERNAL ERROR message in EDAC with unspecified channelSeth Jennings1-2/+6
Intel IA32 SDM Table 15-14 defines channel 0xf as 'not specified', but EDAC doesn't know about this and returns and INTERNAL ERROR when the channel is greater than NUM_CHANNELS: kernel: [ 1538.886456] CPU 0: Machine Check Exception: 0 Bank 1: 940000000000009f kernel: [ 1538.886669] TSC 2bc68b22e7e812 ADDR 46dae7000 MISC 0 PROCESSOR 0:306e4 TIME 1390414572 SOCKET 0 APIC 0 kernel: [ 1538.971948] EDAC MC1: INTERNAL ERROR: channel value is out of range (15 >= 4) kernel: [ 1538.972203] EDAC MC1: 0 CE memory read error on unknown memory (slot:0 page:0x46dae7 offset:0x0 grain:0 syndrome:0x0 - area:DRAM err_code:0000:009f socket:1 channel_mask:1 rank:0) This commit changes sb_edac to forward a channel of -1 to EDAC if the channel is not specified. edac_mc_handle_error() sets the channel to -1 internally after the error message anyway, so this commit should have no effect other than avoiding the INTERNAL ERROR message when the channel is not specified. Signed-off-by: Seth Jennings <sjenning@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-30mpc85xx_edac: Make L2 interrupt shared tooBorislav Petkov1-1/+1
The other two interrupt handlers in this driver are shared, except this one. When loading the driver, it fails like this. So make the IRQ line shared. Freescale(R) MPC85xx EDAC driver, (C) 2006 Montavista Software mpc85xx_mc_err_probe: No ECC DIMMs discovered EDAC DEVICE0: Giving out device to module MPC85xx_edac controller mpc85xx_l2_err: DEV mpc85xx_l2_err (INTERRUPT) genirq: Flags mismatch irq 16. 00000000 ([EDAC] L2 err) vs. 00000080 ([EDAC] PCI err) mpc85xx_l2_err_probe: Unable to request irq 16 for MPC85xx L2 err remove_proc_entry: removing non-empty directory 'irq/16', leaking at least 'aerdrv' ------------[ cut here ]------------ WARNING: at fs/proc/generic.c:521 Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.17.0-rc5-dirty #1 task: ee058000 ti: ee046000 task.ti: ee046000 NIP: c016c0c4 LR: c016c0c4 CTR: c037b51c REGS: ee047c10 TRAP: 0700 Not tainted (3.17.0-rc5-dirty) MSR: 00029000 <CE,EE,ME> CR: 22008022 XER: 20000000 GPR00: c016c0c4 ee047cc0 ee058000 00000053 00029000 00000000 c037c744 00000003 GPR08: c09aab28 c09aab24 c09aab28 00000156 20008028 00000000 c0002ac8 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000139 c0950394 GPR24: c09f0000 ee5585b0 ee047d08 c0a10000 ee047d08 ee15f808 00000002 ee03f660 NIP [c016c0c4] remove_proc_entry LR [c016c0c4] remove_proc_entry Call Trace: remove_proc_entry (unreliable) unregister_irq_proc free_desc irq_free_descs mpc85xx_l2_err_probe platform_drv_probe really_probe __driver_attach bus_for_each_dev bus_add_driver driver_register mpc85xx_mc_init do_one_initcall kernel_init_freeable kernel_init ret_from_kernel_thread Instruction dump: ... Reported-and-tested-by: <lpb_098@163.com> Acked-by: Johannes Thumshirn <johannes.thumshirn@men.de> Cc: stable@vger.kernel.org Signed-off-by: Borislav Petkov <bp@suse.de>
2014-09-23amd64_edac: Modify usage of amd64_read_dct_pci_cfg()Aravind Gopalakrishnan2-71/+80
Rationale behind this change: - F2x1xx addresses were stopped from being mapped explicitly to DCT1 from F15h (OR) onwards. They use _dct[0:1] mechanism to access the registers. So we should move away from using address ranges to select DCT for these families. - On newer processors, the address ranges used to indicate DCT1 (0x140, 0x1a0) have different meanings than what is assumed currently. Changes introduced: - amd64_read_dct_pci_cfg() now takes in dct value and uses it for 'selecting the dct' - Update usage of the function. Keep in mind that different families have specific handling requirements - Remove [k8|f10]_read_dct_pci_cfg() as they don't do much different from amd64_read_pci_cfg() - Move the k8 specific check to amd64_read_pci_cfg - Remove f15_read_dct_pci_cfg() and move logic to amd64_read_dct_pci_cfg() - Remove now needless .read_dct_pci_cfg Testing: - Tested on Fam 10h; Fam15h Models: 00h, 30h; Fam16h using 'EDAC_DEBUG' and mce_amd_inj - driver obtains info from F2x registers and caches it in pvt structures correctly - ECC decoding works fine Signed-off-by: Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com> Link: http://lkml.kernel.org/r/1410799058-3149-1-git-send-email-aravind.gopalakrishnan@amd.com Signed-off-by: Borislav Petkov <bp@suse.de>
2014-09-15ppc4xx_edac: Fix build error caused by wrong member accessPranith Kumar1-1/+1
Fix the following error drivers/edac/ppc4xx_edac.c:977:45: error: request for member 'dimm' in something not a structure or union by changing member access to pointer dereference. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Link: http://lkml.kernel.org/r/1408482646-22541-1-git-send-email-bobby.prani@gmail.com CC: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Borislav Petkov <bp@suse.de>
2014-09-04edac: altera: Add Altera SDRAM EDAC supportThor Thayer3-0/+421
This patch adds support for the CycloneV and ArriaV SDRAM controllers. Correction and reporting of SBEs, Panic on DBEs. There was a discussion thread on whether this driver should be an mfd driver or just make use of syscon, which is already a mfd. Ultimately, the decision to use a simple syscon interface was reached.[1] [1] https://lkml.org/lkml/2014/7/30/514 [dinguyen] Fixed Kconfig to have EDAC_ALTERA_MC as a tristate to prevent a build failure for allmodconfig. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Acked-by: Borislav Petkov <bp@suse.de> [dinguyen] cleaned up commit message Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2014-09-02EDAC: Fix mem_types strings typeBorislav Petkov2-2/+2
This one got forgotten during an earlier cleanup. Signed-off-by: Borislav Petkov <bp@suse.de>
2014-08-15Merge branch 'linux_next' of ↵Linus Torvalds3-272/+546
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac Pull EDAC updates from Mauro Carvalho Chehab. * 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: sb_edac: add support for Haswell based systems sb_edac: Fix mix tab/spaces alignments edac: add DDR4 and RDDR4 sb_edac: remove bogus assumption on mc ordering sb_edac: make minimal use of channel_mask sb_edac: fix socket detection on Ivy Bridge controllers sb_edac: update Kconfig description sb_edac: search devices using product id sb_edac: make RIR limit retrieval per model sb_edac: make node id retrieval per model sb_edac: make memory type detection per memory controller
2014-08-14Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds1-2/+1
Pull device tree updates from Grant Likely: "The branch contains the following device tree changes the v3.17 merge window: Group changes to the device tree. In preparation for adding device tree overlay support, OF_DYNAMIC is reworked so that a set of device tree changes can be prepared and applied to the tree all at once. OF_RECONFIG notifiers see the most significant change here so that users always get a consistent view of the tree. Notifiers generation is moved from before a change to after it, and notifiers for a group of changes are emitted after the entire block of changes have been applied Automatic console selection from DT. Console drivers can now use of_console_check() to see if the device node is specified as a console device. If so then it gets added as a preferred console. UART devices get this support automatically when uart_add_one_port() is called. DT unit tests no longer depend on pre-loaded data in the device tree. Data is loaded dynamically at the start of unit tests, and then unloaded again when the tests have completed. Also contains a few bugfixes for reserved regions and early memory setup" * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: (21 commits) of: Fixing OF Selftest build error drivers: of: add automated assignment of reserved regions to client devices of: Use proper types for checking memory overflow of: typo fix in __of_prop_dup() Adding selftest testdata dynamically into live tree of: Add todo tasklist for Devicetree of: Transactional DT support. of: Reorder device tree changes and notifiers of: Move dynamic node fixups out of powerpc and into common code of: Make sure attached nodes don't carry along extra children of: Make devicetree sysfs update functions consistent. of: Create unlocked versions of node and property add/remove functions OF: Utility helper functions for dynamic nodes of: Move CONFIG_OF_DYNAMIC code into a separate file of: rename of_aliases_mutex to just of_mutex of/platform: Fix of_platform_device_destroy iteration of devices of: Migrate of_find_node_by_name() users to for_each_node_by_name() tty: Update hypervisor tty drivers to use core stdout parsing code. arm/versatile: Add the uart as the stdout device. of: Enable console on serial ports specified by /chosen/stdout-path ...
2014-08-04Merge branch 'x86-ras-for-linus' of ↵Linus Torvalds2-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS updates from Ingo Molnar: "The main changes in this cycle are: - RAS tracing/events infrastructure, by Gong Chen. - Various generalizations of the APEI code to make it available to non-x86 architectures, by Tomasz Nowicki" * 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ras: Fix build warnings in <linux/aer.h> acpi, apei, ghes: Factor out ioremap virtual memory for IRQ and NMI context. acpi, apei, ghes: Make NMI error notification to be GHES architecture extension. apei, mce: Factor out APEI architecture specific MCE calls. RAS, extlog: Adjust init flow trace, eMCA: Add a knob to adjust where to save event log trace, RAS: Add eMCA trace event interface RAS, debugfs: Add debugfs interface for RAS subsystem CPER: Adjust code flow of some functions x86, MCE: Robustify mcheck_init_device trace, AER: Move trace into unified interface trace, RAS: Add basic RAS trace event x86, MCE: Kill CPU_POST_DEAD
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 02:45:59 +0000