summaryrefslogtreecommitdiffstats
path: root/drivers/edac/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2021-07-15EDAC/igen6: fix core dependency AGAINRandy Dunlap1-1/+1
My previous patch had a typo/thinko which prevents this driver from being enabled: change X64_64 to X86_64. Fixes: 0a9ece9ba154 ("EDAC/igen6: fix core dependency") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-edac@vger.kernel.org Cc: bowsingbetee <bowsingbetee@protonmail.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-20EDAC/igen6: fix core dependencyRandy Dunlap1-1/+2
igen6_edac needs mce_register()/unregister() functions, so it should depend on X86_MCE (or X86_MCE_INTEL). That change prevents these build errors: ld: drivers/edac/igen6_edac.o: in function `igen6_remove': igen6_edac.c:(.text+0x494): undefined reference to `mce_unregister_decode_chain' ld: drivers/edac/igen6_edac.o: in function `igen6_probe': igen6_edac.c:(.text+0xf5b): undefined reference to `mce_register_decode_chain' Fixes: 10590a9d4f23e ("EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/20210619160203.2026-1-rdunlap@infradead.org
2021-03-23EDAC: altera: merge ARCH_SOCFPGA and ARCH_STRATIX10Krzysztof Kozlowski1-1/+1
Simplify 32-bit and 64-bit Intel SoCFPGA Kconfig options by having only one for both of them. This the common practice for other platforms. Additionally, the ARCH_SOCFPGA is too generic as SoCFPGA designs come from multiple vendors. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2020-12-28EDAC/amd64: Limit error injection functionality to supported hwBorislav Petkov1-4/+4
Families up to and including 0x16 allow access to the injection hardware. Starting with family 0x17, access to those registers is blocked by security policy. Limit that only on the families which support it. Suggested-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20201222180013.GD13463@zn.tnic
2020-12-28EDAC/amd64: Merge error injection sysfs facilitiesBorislav Petkov1-4/+3
Merge them into the main driver and put them inside an EDAC_DEBUG ifdeffery to simplify the driver and have all debugging/injection stuff behind a debug build-time switch. No functional changes. Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com> Link: https://lkml.kernel.org/r/20201215110517.5215-2-bp@alien8.de
2020-12-14Merge branches 'edac-spr', 'edac-igen6' and 'edac-misc' into ↵Borislav Petkov1-0/+9
edac-updates-for-v5.11 Signed-off-by: Borislav Petkov <bp@suse.de>
2020-12-07EDAC/mv64x60: Remove orphan mv64x60 driverMichael Ellerman1-7/+0
The mv64x60 EDAC driver depends on CONFIG_MV64X60. But that symbol is not user-selectable, and the last code that selected it was removed with the C2K board support in 2018, see: 92c8c16f3457 ("powerpc/embedded6xx: Remove C2K board support") That means the driver is now dead code, so remove it. Suggested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20201207040253.628528-1-mpe@ellerman.id.au
2020-12-07EDAC/aspeed: Add support for AST2400 and AST2600Troy Lee1-3/+3
Add AST2400 and AST2600 EDAC driver support. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Stefan Schaeckeler <sschaeck@cisco.com> Link: https://lkml.kernel.org/r/20201207090013.14145-3-troy_lee@aspeedtech.com
2020-11-19EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECCQiuxu Zhuo1-0/+9
This driver supports Intel client SoC with integrated memory controller using In-Band ECC(IBECC). The memory correctable and uncorrectable errors are reported via NMIs. The driver handles the NMIs and decodes the memory error address to platform specific address. The first IBECC-supported SoC is Elkhart Lake. [Tony: s/#include <linux/nmi.h>/#include <asm/nmi.h>/ to fix randconfig build] Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2020-08-17EDAC/al-mc-edac: Add Amazon's Annapurna Labs Memory Controller driverTalel Shenhar1-0/+7
The Amazon's Annapurna Labs Memory Controller EDAC supports ECC capability for error detection and correction (Single bit error correction, Double detection). This driver introduces EDAC driver for that capability. [ bp: Remove "EDAC" string from Kconfig tristate as it is redundant. ] Signed-off-by: Talel Shenhar <talel@amazon.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: James Morse <james.morse@arm.com> Link: https://lkml.kernel.org/r/20200816185551.19108-3-talel@amazon.com
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-1/+1
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-02-19EDAC: Add EDAC driver for DMC520Lei Wang1-0/+7
The driver supports error detection and correction on devices with an ARM DMC-520 memory controller. Signed-off-by: Lei Wang <leiwang_git@outlook.com> Signed-off-by: Shiping Ji <shiping.linux@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: James Morse <james.morse@arm.com> Link: https://lkml.kernel.org/r/83b48c70-dc06-d0d4-cae9-a2187fca628b@gmail.com
2020-01-27Merge tag 'edac_for_5.6' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC updates from Borislav Petkov: "A totally boring branch this time around: a garden variety of small fixes all over the place" * tag 'edac_for_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/amd64: Do not warn when removing instances EDAC/sifive: Fix return value check in ecc_register() EDAC/aspeed: Remove unneeded semicolon EDAC: remove set but not used variable 'ecc_loc' EDAC: skx_common: downgrade message importance on missing PCI device EDAC/Kconfig: Fix Kconfig indentation
2019-12-20riscv: move sifive_l2_cache.c to drivers/socChristoph Hellwig1-1/+1
The sifive_l2_cache.c is in no way related to RISC-V architecture memory management. It is a little stub driver working around the fact that the EDAC maintainers prefer their drivers to be structured in a certain way that doesn't fit the SiFive SOCs. Move the file to drivers/soc and add a Kconfig option for it, as well as the whole drivers/soc boilerplate for CONFIG_SOC_SIFIVE. Fixes: a967a289f169 ("RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Borislav Petkov <bp@suse.de> [paul.walmsley@sifive.com: keep the MAINTAINERS change specific to the L2$ controller code] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-09EDAC/Kconfig: Fix Kconfig indentationKrzysztof Kozlowski1-2/+1
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with a command like: $ sed -e 's/^ /\t/' -i */Kconfig [ bp: make it a single line. ] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: James Morse <james.morse@arm.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Robert Richter <rrichter@marvell.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20191120134206.15588-1-krzk@kernel.org
2019-09-22Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds1-0/+7
Pull ARM updates from Russell King: - fix various clang build and cppcheck issues - switch ARM to use new common outgoing-CPU-notification code - add some additional explanation about the boot code - kbuild "make clean" fixes - get rid of another "(____ptrval____)", this time for the VDSO code - avoid treating cache maintenance faults as a write - add a frame pointer unwinder implementation for clang - add EDAC support for Aurora L2 cache - improve robustness of adjust_lowmem_bounds() finding the bounds of lowmem. - add reset control for AMBA primecell devices * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (24 commits) ARM: 8906/1: drivers/amba: add reset control to amba bus probe ARM: 8905/1: Emit __gnu_mcount_nc when using Clang 10.0.0 or newer ARM: 8904/1: skip nomap memblocks while finding the lowmem/highmem boundary ARM: 8903/1: ensure that usable memory in bank 0 starts from a PMD-aligned address ARM: 8891/1: EDAC: armada_xp: Add support for more SoCs ARM: 8888/1: EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECC ARM: 8892/1: EDAC: Add missing debugfs_create_x32 wrapper ARM: 8890/1: l2x0: add marvell,ecc-enable property for aurora ARM: 8889/1: dt-bindings: document marvell,ecc-enable binding ARM: 8886/1: l2x0: support parity-enable/disable on aurora ARM: 8885/1: aurora-l2: add defines for parity and ECC registers ARM: 8887/1: aurora-l2: add prefix to MAX_RANGE_SIZE ARM: 8902/1: l2c: move cache-aurora-l2.h to asm/hardware ARM: 8900/1: UNWINDER_FRAME_POINTER implementation for Clang ARM: 8898/1: mm: Don't treat faults reported from cache maintenance as writes ARM: 8896/1: VDSO: Don't leak kernel addresses ARM: 8895/1: visit mach-* and plat-* directories when cleaning ARM: 8894/1: boot: Replace open-coded nop with macro ARM: 8893/1: boot: Explain the 8 nops ARM: 8876/1: fix O= building with CONFIG_FPE_FASTFPE ...
2019-08-29ARM: 8888/1: EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECCJan Luebbe1-0/+7
Add support for the ECC functionality as found in the DDR RAM and L2 cache controllers on the MV78230/MV78x60 SoCs. This driver has been tested on the MV78460 (on a custom board with a DDR3 ECC DIMM). [cp use SPDX license] Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-08-08EDAC, mellanox: Add ECC support for BlueField DDR4Shravan Kumar Ramani1-0/+7
Add ECC support for Mellanox BlueField SoC DDR controller. This requires SMC to the running Arm Trusted Firmware to report what is the current memory configuration. Reviewed-by: James Morse <james.morse@arm.com> Signed-off-by: Shravan Kumar Ramani <sramani@mellanox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-20EDAC/sifive: Add EDAC platform driver for SiFive SoCsYash Shah1-0/+6
Add an EDAC driver for SiFive SoCs. The initial version supports ECC event monitoring and reporting through the EDAC framework for the SiFive L2 cache controller. It registers for notifier events from the L2 cache controller driver (arch/riscv/mm/sifive_l2_cache.c) for L2 ECC events. [ bp: Massage commit message. ] Signed-off-by: Yash Shah <yash.shah@sifive.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: James Morse <james.morse@arm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: linux-riscv@lists.infradead.org Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: "Paul E. McKenney" <paulmck@linux.ibm.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: sachin.ghadi@sifive.com Link: https://lkml.kernel.org/r/1557142026-15949-2-git-send-email-yash.shah@sifive.com
2019-05-10EDAC/mpc85xx: Prevent building as a moduleMichael Ellerman1-2/+2
The mpc85xx EDAC driver can be configured as a module but then fails to build because it uses two unexported symbols: ERROR: ".pci_find_hose_for_OF_device" [drivers/edac/mpc85xx_edac_mod.ko] undefined! ERROR: ".early_find_capability" [drivers/edac/mpc85xx_edac_mod.ko] undefined! We don't want to export those symbols just for this driver, so make the driver only configurable as a built-in. This seems to have been broken since at least c92132f59806 ("edac/85xx: Add PCIe error interrupt edac support") (Nov 2013). [ bp: make it depend on EDAC=y so that the EDAC core doesn't get built as a module. ] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Johannes Thumshirn <jth@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: linuxppc-dev@ozlabs.org Cc: morbidrsa@gmail.com Link: https://lkml.kernel.org/r/20190502141941.12927-1-mpe@ellerman.id.au
2019-02-26EDAC/altera: Add separate SDRAM EDAC configThor Thayer1-3/+11
The CONFIG_ALTERA_EDAC Kconfig symbol always enables the SDRAM EDAC functionality. On the newer architectures, however, there are cases where the peripheral EDAC functionality is enabled but SDRAM needs to be disabled. Move SDRAM functions so they can be contained inside the conditional CONFIG. Create new CONFIG option just for SDRAM. [ bp: Massage commit message. ] Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: dinguyen@kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: linux@armlinux.org.uk Link: https://lkml.kernel.org/r/1551121006-4657-2-git-send-email-thor.thayer@linux.intel.com
2019-02-06EDAC, i10nm: Fix randconfig buildsTony Luck1-2/+2
I10NM_EDAC depends on CONFIG_ACPI so make that dependency explicit. Reported-by: Borislav Petkov <bp@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Aristeu Rozanski <aris@redhat.com> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: https://lkml.kernel.org/r/20190205180200.26865-1-tony.luck@intel.com
2019-02-02EDAC, i10nm: Add a driver for Intel 10nm server processorsQiuxu Zhuo1-0/+12
This driver supports the Intel 10nm series server integrated memory controller. It gets the memory capacity and topology information by reading the registers in PCI configuration space and memory-mapped I/O. It decodes the memory error address to the platform specific address by using the ACPI Address Translation (ADXL) Device Specific Method (DSM). Co-developed-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Link: https://lkml.kernel.org/r/20190130191519.15393-5-tony.luck@intel.com
2019-01-18EDAC, aspeed: Add an Aspeed AST2500 EDAC driverStefan M Schaeckeler1-0/+9
Add support for the Aspeed AST2500 SoC. Signed-off-by: Stefan M Schaeckeler <sschaeck@cisco.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-aspeed@lists.ozlabs.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: https://lkml.kernel.org/r/1547743097-5236-2-git-send-email-schaecsn@gmx.net
2018-11-07EDAC, skx: Fix randconfig builds in a better wayLuck, Tony1-2/+2
It was previously noted that Kconfig complained about unmet dependencies when trying to configure skx_edac together with CONFIG_ACPI=n. First fix for this checked for ACPI when doing select ACPI_ADXL but this required stub functions for the case where ACPI wasn't selected. It also allowed building a driver that didn't actually work for a system that has non-volatile DIMMs. Arnd Bergmann pointed out that the right fix is to make EDAC_SKX "depend on ACPI". Fixes: a324e9396ca3 ("EDAC, skx: Fix randconfig builds") Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> CC: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Mauro Carvalho Chehab <mchehab@kernel.org> CC: linux-edac <linux-edac@vger.kernel.org> CC: qiuxu.zhuo@intel.com Link: http://lkml.kernel.org/r/20181106183914.GA26731@agluck-desk
2018-11-06EDAC, synopsys: Add ECC support for ZynqMP DDR controllerManish Narani1-1/+1
Add ECC support for ZynqMP DDR controller IP. The IP supports interrupts for corrected and uncorrected errors. Add interrupt handlers for the same. Signed-off-by: Manish Narani <manish.narani@xilinx.com> Signed-off-by: Borislav Petkov <bp@suse.de> CC: Mauro Carvalho Chehab <mchehab@kernel.org> CC: Michal Simek <michal.simek@xilinx.com> CC: amit.kucheria@linaro.org CC: devicetree@vger.kernel.org CC: leoyang.li@nxp.com CC: linux-arm-kernel@lists.infradead.org CC: linux-edac <linux-edac@vger.kernel.org> CC: mark.rutland@arm.com CC: robh+dt@kernel.org CC: sudeep.holla@arm.com Link: http://lkml.kernel.org/r/1540447621-22870-5-git-send-email-manish.narani@xilinx.com
2018-11-02Merge tag 'edac_for_4.20_2' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp Pull more EDAC updates from Borislav Petkov: "The second part of the EDAC pile which contains the ADXL user and a build fix which addresses a not-so-sensical .config but fixes randconfig builds people do: - skx_edac: Address translation for NVDIMMs (Tony Luck and Qiuxu Zhuo) - ACPI_ADXL build fix" [ I don't think "sensical" is a word, particularly when used in the context of actually meaning "nonsensical", but I like it - Linus ] * tag 'edac_for_4.20_2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, skx: Fix randconfig builds EDAC, skx_edac: Add address translation for non-volatile DIMMs
2018-10-31EDAC, skx: Fix randconfig buildsBorislav Petkov1-1/+1
The driver depends on the ADXL component glue and selects it. However, ADXL itself implicitly depends on ACPI and in nonsensical randconfig builds like this: # CONFIG_ACPI is not set CONFIG_ACPI_ADXL=y where ACPI is not enabled, the build fails with: drivers/edac/skx_edac.o: In function `skx_mce_check_error': skx_edac.c:(.text+0xab): undefined reference to `adxl_decode' drivers/edac/skx_edac.o: In function `skx_init': skx_edac.c:(.init.text+0x8bf): undefined reference to `adxl_get_component_names' make: *** [vmlinux] Error 1 Add stubs for that case so that the build succeeds. CONFIG_ACPI=n doesn't make any sense for real configurations but this fix will at least silence randconfig builds. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Tony Luck <tony.luck@intel.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org>
2018-10-25EDAC, skx_edac: Add address translation for non-volatile DIMMsQiuxu Zhuo1-0/+1
Currently, this driver doesn't support address translation for non-volatile DIMMs. The ACPI ADXL DSM method provides address translation for both volatile and non-volatile DIMMs. Enable it to use the ACPI DSM methods if they are supported and there are non-volatile DIMMs populated on the system. Co-developed-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> CC: Mauro Carvalho Chehab <mchehab@kernel.org> CC: arozansk@redhat.com CC: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1540106336-5212-1-git-send-email-qiuxu.zhuo@intel.com
2018-09-13drivers: edac: Add EDAC driver support for QCOM SoCsChannagoud Kadabi1-0/+14
Add error reporting driver for Single Bit Errors (SBEs) and Double Bit Errors (DBEs). As of now, this driver supports error reporting for Last Level Cache Controller (LLCC) of Tag RAM and Data RAM. Interrupts are triggered when the errors happen in the cache, the driver handles those interrupts and dumps the syndrome registers. Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org> Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org> Co-developed-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-14EDAC, skx: Fix skx_edac build error when ACPI_NFIT=mRandy Dunlap1-0/+1
Prevent build error when CONFIG_ACPI_NFIT=m and CONFIG_EDAC_SKX=y by limiting EDAC_SKX based on how ACPI_NFIT is set. Fixes this build error: drivers/edac/skx_edac.o: In function `get_nvdimm_info': ../drivers/edac/skx_edac.c:399: undefined reference to `nfit_get_smbios_id' Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Fixes: 58ca9ac1463d ("EDAC, skx_edac: Detect non-volatile DIMMs") Link: http://lkml.kernel.org/r/3af91354-8e19-d2af-1bba-ced8dce053f1@infradead.org Signed-off-by: Borislav Petkov <bp@suse.de>
2018-05-12EDAC, altera: Add support for Stratix10 SDRAM EDACThor Thayer1-1/+1
Support for Stratix10 SDRAM ECC requires the use of SMC calls to Secure Monitor for accessing registers. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: catalin.marinas@arm.com Cc: devicetree@vger.kernel.org Cc: dinguyen@kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: mark.rutland@arm.com Cc: robh+dt@kernel.org Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1524854238-19394-3-git-send-email-thor.thayer@linux.intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2018-04-05Merge tag 'edac_for_4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds1-2/+5
Pull EDAC updates from Borislav Petkov: "Noteworthy is the NVDIMM support: - NVDIMM support to EDAC (Tony Luck) - misc fixes" * tag 'edac_for_4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, sb_edac: Remove variable length array usage EDAC, skx_edac: Detect non-volatile DIMMs firmware, DMI: Add function to look up a handle and return DIMM size acpi, nfit: Add function to look up nvdimm device and provide SMBIOS handle EDAC: Add new memory type for non-volatile DIMMs EDAC: Drop duplicated array of strings for memory type names EDAC, layerscape: Allow building for LS1021A
2018-03-26edac: remove tile driverArnd Bergmann1-8/+0
The Tile architecture is obsolete and getting removed from the kernel, this driver appears to only be used there, and not on the ARM based successors (Tile-Mx, BlueField), so we should remove it as well. Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-15EDAC, skx_edac: Detect non-volatile DIMMsTony Luck1-1/+4
This just covers the topology function of the EDAC driver. We locate which DIMM slots are populated with NVDIMMs and query the NFIT and SMBIOS tables to get the size. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Aristeu Rozanski <aris@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: linux-acpi@vger.kernel.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: linux-nvdimm@lists.01.org Link: http://lkml.kernel.org/r/20180312182430.10335-6-tony.luck@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2018-02-27EDAC, layerscape: Allow building for LS1021ARasmus Villemoes1-1/+1
The LS1021A has a memory controller supported by this driver. It builds just fine, and I've done some rudimentary testing using the error injection facility, which suggests that it is indeed working. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Acked-by: York Sun <york.sun@nxp.com> Cc: Alexander Stein <alexander.stein@systec-electronic.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180220150912.2954-1-rasmus.villemoes@prevas.dk Signed-off-by: Borislav Petkov <bp@suse.de>
2017-11-27EDAC, ti: Add support for TI keystone and DRA7xx EDACTero Kristo1-0/+7
TI Keystone and DRA7xx SoCs have support for EDAC on DDR3 memory that can correct one bit errors and detect two bit errors. Add EDAC driver for this feature which plugs into the generic kernel EDAC framework. Signed-off-by: Tero Kristo <t-kristo@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: linux-omap@vger.kernel.org Link: http://lkml.kernel.org/r/1510578490-14510-1-git-send-email-t-kristo@ti.com [ Add SPDX tag and make _emif_get_id() use edac_printk(). ] Signed-off-by: Borislav Petkov <bp@suse.de>
2017-04-27EDAC, ghes: Do not enable it by defaultBorislav Petkov1-1/+0
Leave it to the user to decide whether to enable this or not. Otherwise, platform-specific drivers won't initialize (currently, EDAC supports only a single platform driver loaded). Signed-off-by: Borislav Petkov <bp@suse.de>
2017-04-10EDAC: Update Kconfig help textBorislav Petkov1-14/+4
Remove the old URLs. Signed-off-by: Borislav Petkov <bp@suse.de>
2017-04-10EDAC: Remove EDAC_MM_EDACBorislav Petkov1-58/+43
Move all the EDAC core functionality behind CONFIG_EDAC and get rid of that indirection. Update defconfigs which had it. While at it, fix dependencies such that EDAC depends on RAS for the tracepoints. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: linux-edac@vger.kernel.org
2017-03-27EDAC, thunderx: Add Cavium ThunderX EDAC driverSergey Temerkhanov1-0/+11
Add support for Cavium ThunderX EDAC capable on-chip peripherals, namely the DRAM controller (LMC), cache coherent processor interconnect (CCPI) and level 2 cache blocks (L2C-TAD, L2C-MCI, L2C-CBC) Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Cc: David.Daney@cavium.com Cc: Jan.Glauber@cavium.com Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170324222837.60583-1-s.temerkhanov@gmail.com Signed-off-by: Borislav Petkov <bp@suse.de>
2017-03-23EDAC: Select DEBUG_FSBorislav Petkov1-0/+1
The debugfs.c functionality relies on DEBUG_FS so select it. Signed-off-by: Borislav Petkov <bp@suse.de>
2017-03-16EDAC, pnd2_edac: Add new EDAC driver for Intel SoC platformsTony Luck1-0/+9
Initial target for this driver is the Intel Apollo Lake platform and Denverton micro-server, they use the same internal memory controller IP called Pondicherry2. Memory controller registers are not in PCI config space like earlier Intel memory controllers. For Apollo Lake platform they are accessed via a "side-band" interface, for Denverton micro-server they are access via PCI config space and memory map I/O. This driver is for Apollo Lake and Denverton, but only the Denverton is fully enabled while we wait for the sideband driver. Apollo lake driver and initial cut at Denverton driver by Tony Luck. Extensive cleanup, refactoring and basic verification by Qiuxu Zhuo. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170308174539.14432-1-qiuxu.zhuo@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-10-04Merge tag 'edac_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds1-0/+42
Pull EDAC updates from Borislav Petkov: "A lot of movement in the EDAC tree this time around, coarse summary below: - Altera Arria10 enablement of NAND, DMA, USB, QSPI and SD-MMC FIFO buffers (Thor Thayer) - split the memory controller part out of mpc85xx and share it with a new Freescale ARM Layerscape driver (York Sun) - amd64_edac fixes (Yazen Ghannam) - misc cleanups, refactoring and fixes all over the place" * tag 'edac_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (37 commits) EDAC, altera: Add IRQ Flags to disable IRQ while handling EDAC, altera: Correct EDAC IRQ error message EDAC, amd64: Autoload module using x86_cpu_id EDAC, sb_edac: Remove NULL pointer check on array pci_tad EDAC: Remove NO_IRQ from powerpc-only drivers EDAC, fsl_ddr: Fix error return code in fsl_mc_err_probe() EDAC, fsl_ddr: Add entry to MAINTAINERS EDAC: Move Doug Thompson to CREDITS EDAC, I3000: Orphan driver EDAC, fsl_ddr: Replace simple_strtoul() with kstrtoul() EDAC, layerscape: Add Layerscape EDAC support EDAC, fsl_ddr: Fix IRQ dispose warning when module is removed EDAC, fsl_ddr: Add support for little endian EDAC, fsl_ddr: Add missing DDR DRAM types EDAC, fsl_ddr: Rename macros and names EDAC, fsl-ddr: Separate FSL DDR driver from MPC85xx EDAC, mpc85xx: Replace printk() with pr_* format EDAC, mpc85xx: Drop setting/clearing RFXE bit in HID1 EDAC, altera: Rename MC trigger to common name EDAC, altera: Rename device trigger to common name ...
2016-09-01EDAC, layerscape: Add Layerscape EDAC supportYork Sun1-0/+7
Add DDR EDAC driver for ARM-based compatible controllers. Both big-endian and little-endian are supported, as specified in device tree. Signed-off-by: York Sun <york.sun@nxp.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1471990465-27443-1-git-send-email-york.sun@nxp.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-08-21EDAC, skx_edac: Add EDAC driver for SkylakeTony Luck1-0/+8
This is an entirely new driver instead of yet another set of patches to sb_edac.c because: 1) Mapping from PCI devices to socket/memory controller is significantly different. Skylake scatters devices on a socket across a number of PCI buses. 2) There is an extra level of interleaving via the "mcroute" register that would be a little messy to squeeze into the old driver. 3) Validation is getting too expensive. Changes to sb_edac need to be checked against Sandy Bridge, Ivy Bridge, Haswell, Broadwell and Knights Landing. Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-10EDAC, altera: Add Arria10 SD-MMC EDAC supportThor Thayer1-0/+7
Add Altera Arria10 SD-MMC FIFO memory EDAC support. The SD-MMC is a dual port RAM implementation which is different than any of the other peripherals and therefore requires additional code. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: dinguyen@opensource.altera.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1470753653-23465-3-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-08-08EDAC, altera: Add Arria10 QSPI supportThor Thayer1-0/+7
Add Altera Arria10 QSPI FIFO memory support. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: dinguyen@opensource.altera.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1468512408-5156-9-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-08-08EDAC, altera: Add Arria10 USB supportThor Thayer1-0/+7
Add Altera Arria10 USB FIFO memory support. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: dinguyen@opensource.altera.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1468512408-5156-8-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-08-08EDAC, altera: Add Arria10 DMA supportThor Thayer1-0/+7
Add Altera Arria10 DMA FIFO memory support. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: dinguyen@opensource.altera.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1468512408-5156-7-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 04:47:53 +0000