summaryrefslogtreecommitdiffstats
path: root/drivers/dma
AgeCommit message (Collapse)AuthorFilesLines
2022-05-29Merge tag 'dmaengine-5.19-rc1' of ↵Linus Torvalds45-322/+2420
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "Nothing special, this includes a couple of new device support and new driver support and bunch of driver updates. New support: - Tegra gpcdma driver support - Qualcomm SM8350, Sm8450 and SC7280 device support - Renesas RZN1 dma and platform support Updates: - stm32 device pause/resume support and updates - DMA memset ops Documentation and usage clarification - deprecate '#dma-channels' & '#dma-requests' bindings - driver updates for stm32, ptdma idsx etc" * tag 'dmaengine-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (87 commits) dmaengine: idxd: make idxd_wq_enable() return 0 if wq is already enabled dmaengine: sun6i: Add support for the D1 variant dmaengine: sun6i: Add support for 34-bit physical addresses dmaengine: sun6i: Do not use virt_to_phys dt-bindings: dma: sun50i-a64: Add compatible for D1 dmaengine: tegra: Remove unused switch case dmaengine: tegra: Fix uninitialized variable usage dmaengine: stm32-dma: add device_pause/device_resume support dmaengine: stm32-dma: rename pm ops before dma pause/resume introduction dmaengine: stm32-dma: pass DMA_SxSCR value to stm32_dma_handle_chan_done() dmaengine: stm32-dma: introduce stm32_dma_sg_inc to manage chan->next_sg dmaengine: stm32-dmamux: avoid reset of dmamux if used by coprocessor dmaengine: qcom: gpi: Add support for sc7280 dt-bindings: dma: pl330: Add power-domains dmaengine: stm32-mdma: use dev_dbg on non-busy channel spurious it dmaengine: stm32-mdma: fix chan initialization in stm32_mdma_irq_handler() dmaengine: stm32-mdma: remove GISR1 register dmaengine: ti: deprecate '#dma-channels' dmaengine: mmp: deprecate '#dma-channels' dmaengine: pxa: deprecate '#dma-channels' and '#dma-requests' ...
2022-05-26Merge tag 'arm-multiplatform-5.19-1' of ↵Linus Torvalds1-6/+13
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARMv4T/v5 multiplatform support from Arnd Bergmann: "This series has been 12 years in the making, it mostly finishes the work that was started with the founding of Linaro to clean up platform support in the kernel. The largest change here is a cleanup of the omap1 platform, which is the final ARM machine type to get converted to the common-clk subsystem. All the omap1 specific drivers are now made independent of the mach/*.h headers to allow the platform to be part of a generic ARMv4/v5 multiplatform kernel. The last bit that enables this support is still missing here while we wait for some last dependencies to make it into the mainline kernel through other subsystems. The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost at the point of allowing multiplatform kernels, this work gets completed here along with a few additional cleanup. At the same time, the s3c24xx and s3c64xx are now deprecated and expected to get removed in the future. The PXA and OMAP1 bits are in a separate branch because of dependencies. Once both branches are merged, only the three Intel StrongARM platforms (RiscPC, Footbridge/NetWinder and StrongARM1100) need separate kernels, and there are no plans to include these" * tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits) ARM: ixp4xx: Consolidate Kconfig fixing issue ARM: versatile: Add missing of_node_put in dcscb_init ARM: config: Refresh IXP4xx config after multiplatform ARM: omap1: add back omap_set_dma_priority() stub ARM: omap: fix missing declaration warnings ARM: omap: fix address space warnings from sparse ARM: spear: remove include/mach/ subdirectory ARM: davinci: remove include/mach/ subdirectory ARM: omap2: remove include/mach/ subdirectory integrator: remove empty ap_init_early() ARM: s3c: fix include path MAINTAINERS: omap1: Add Janusz as an additional maintainer ARM: omap1: htc_herald: fix typos in comments ARM: OMAP1: fix typos in comments ARM: OMAP1: clock: Remove noop code ARM: OMAP1: clock: Remove unused code ARM: OMAP1: clock: Fix UART rate reporting algorithm ARM: OMAP1: clock: Fix early UART rate issues ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF ARM: omap1: fix build with no SoC selected ...
2022-05-25Merge tag 'sound-5.19-rc1' of ↵Linus Torvalds2-6/+72
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "Not much dramatic changes at this time, but we've received quite a lot of changes for ASoC, while there are still a few fixes and quirks for usual HD- and USB-auido. Here are some highlights. ASoC: - Overhaul of endianness specification for data formats, avoiding needless restrictions due to CODECs - Initial stages of Intel AVS driver merge - Introduction of v4 IPC mechanism for SOF - TDM mode support for AK4613 - Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces, nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780 Others: - A few regression fixes after the USB-audio endpoint management refactoring - More enhancements for Cirrus HD-audio codec support (still ongoing) - Addition of generic serial MIDI driver" * tag 'sound-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (504 commits) ALSA: hda/realtek - Add new type for ALC245 ALSA: usb-audio: Configure sync endpoints before data ALSA: ctxfi: fix typo in comment ALSA: cs5535audio: fix typo in comment ALSA: ctxfi: Add SB046x PCI ID ALSA: usb-audio: Add missing ep_idx in fixed EP quirks ALSA: usb-audio: Workaround for clock setup on TEAC devices ALSA: lola: Bounds check loop iterator against streams array size ASoC: max98090: Move check for invalid values before casting in max98090_put_enab_tlv() ASoC: rt1308-sdw: add the default value of register 0xc320 ASoC: rt9120: Use pm_runtime and regcache to optimize 'pwdnn' logic ASoC: rt9120: Fix 3byte read, valule offset typo ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver. ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver ASoC: wm2000: fix missing clk_disable_unprepare() on error in wm2000_anc_transition() ASoC: codecs: lpass: Fix passing zero to 'PTR_ERR' ASoC: SOF: sof-client-ipc-flood-test: use pm_runtime_resume_and_get() ASoC: SOF: mediatek: remove duplicate include in mt8195.c ASoC: SOF: mediatek: Add mt8195 debug dump ASoC: SOF: mediatek: Add mediatek common debug dump ...
2022-05-19dmaengine: idxd: make idxd_wq_enable() return 0 if wq is already enabledDave Jiang1-1/+1
When calling idxd_wq_enable() and wq is already enabled, code should return 0 and indicate function is successful instead of return error code and fail. This should also put idxd_wq_enable() in sync with idxd_wq_disable() where it returns 0 if wq is already disabled. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/165090980906.1378449.1939401700832432886.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: sun6i: Add support for the D1 variantSamuel Holland2-1/+2
So far it appears to match the configuration of the A100 variant. Since D1 is a RISC-V chip, it does not meet any of the existing dependencies for this driver, so relax the dependency somewhat. Acked-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220424172759.33383-5-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: sun6i: Add support for 34-bit physical addressesSamuel Holland1-15/+38
Recent Allwinner SoCs support >4 GiB of DRAM, so those variants of the DMA engine support >32 bit physical addresses. This is accomplished by placing the high bits in the "para" word in the DMA descriptor. DMA descriptors themselves can be located at >32 bit addresses by putting the high bits in the LSBs of the descriptor address register, taking advantage of the required DMA descriptor alignment. However, support for this is not really necessary, so we can avoid the complication by allocating them from the DMA_32 zone. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220424172759.33383-4-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: sun6i: Do not use virt_to_physSamuel Holland1-19/+19
This breaks on RISC-V, because dma_pool_alloc returns addresses which are not in the linear map. Instead, plumb through the physical address which is already known anyway. Acked-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220424172759.33383-3-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: tegra: Remove unused switch caseAkhil R1-4/+0
Remove unused switch case in get_transfer_param() function. The function is not called for MEM_TO_MEM transfers. Signed-off-by: Akhil R <akhilrajeev@nvidia.com> Link: https://lore.kernel.org/r/20220426101913.43335-3-akhilrajeev@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: tegra: Fix uninitialized variable usageAkhil R1-4/+4
Initialize slave_bw in dma_prep*() functions as the parameter is not set for DMA_MEM_TO_MEM case in get_transfer_param(). Though the case may never occur, initializing it avoids warning from certain static checkers Fixes: ee17028009d4 ("dmaengine: tegra: Add tegra gpcdma driver") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Akhil R <akhilrajeev@nvidia.com> Link: https://lore.kernel.org/r/20220426101913.43335-2-akhilrajeev@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: stm32-dma: add device_pause/device_resume supportAmelie Delaunay1-13/+234
At any time, a DMA transfer can be suspended to be restarted later before the end of the DMA transfer. In order to restart from the point where the transfer was stopped, DMA_SxNDTR has to be read after disabling the channel by clearing the EN bit in DMA_SxCR register, to know the number of data items already collected. Peripheral and/or memory addresses have to be updated in order to adjust the address pointers. SxNDTR register has to be updated with the remaining number of data items to be transferred (the value read when the channel was disabled). Then the channel can be re-enabled to resume the transfer from the point it was suspended. If the channel was configured in circular or double-buffer mode, the circular or double-buffer mode must be disabled before re-enabling the channel to be able to reconfigure SxNDTR register and re-activate circular or double-buffer mode on next Transfer Complete interrupt where channel will be disabled by HW. This is due to the fact that on resume, re-writing SxNDTR register value updates internal HW auto-reload data counter, and then it truncates all next transfers after a pause/resume sequence. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20220505115611.38845-5-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: stm32-dma: rename pm ops before dma pause/resume introductionAmelie Delaunay1-3/+3
dmaengine framework offers device_pause and device_resume ops to pause an on-going transfer and resume it later. To avoid any misunderstanding with system sleep pm ops, rename pm ops into stm32_dma_pm_suspend and stm32_dma_pm_resume. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20220505115611.38845-4-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: stm32-dma: pass DMA_SxSCR value to stm32_dma_handle_chan_done()Amelie Delaunay1-27/+27
stm32_dma_handle_chan_done() is called on Transfer Complete interrupt. As DMA_SxSCR register is read in interrupt handler, pass the value as parameter of stm32_dma_handle_chan_done(). Also return directly if chan->desc is null to remove one ident level. Then, stm32_dma_configure_next_sg() is doing something only if Double-Buffer Mode (DBM) is enabled, so, check it is enabled prior calling stm32_dma_configure_next_sg(), to remove one ident level in stm32_dma_configure_next_sg(). Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20220505115611.38845-3-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: stm32-dma: introduce stm32_dma_sg_inc to manage chan->next_sgAmelie Delaunay1-5/+9
chan->next_sg is used to know which transfer will start after the ongoing one. It is incremented for each new transfer, either on transfer start for non-cyclic transfers, or on transfer complete interrupt for cyclic transfers. For cyclic transfer, when the last item is reached, chan->next_sg must be reinitialized to the first item. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20220505115611.38845-2-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: stm32-dmamux: avoid reset of dmamux if used by coprocessorAmelie Delaunay1-1/+1
One of the two DMA controllers managed by the DMAMUX can be used by the coprocessor. It is defined in the device tree with dma-masters. When the two DMA controllers are used by the main CPU, dma-masters = <&dma1, &dma2>; is specified in the device tree. When one of the controllers is used by coprocessor (so not managed by Linux), dma-masters = <&dma1>; is specified in the device tree. In this case, Linux driver must not reset the DMAMUX, because it could have been configured by the coprocessor to use the second DMA controller. count is the number of DMA controllers defined in dma-masters property. Reset only if resets property is found and valid in device tree, and if the two DMA controllers are under Linux control. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20220504161724.123180-1-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: qcom: gpi: Add support for sc7280Vinod Koul1-0/+1
Add compatible and driver_data for GPI DMA engines found in Qualcomm SC7280. The driver_data contains ee_offset of 0x10000. Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20220421121733.1829350-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: stm32-mdma: use dev_dbg on non-busy channel spurious itAmelie Delaunay1-3/+6
If interrupt occurs while !chan->busy, it means channel has been disabled between the raise of the interruption and the read of status and ien, so, spurious interrupt can be silently discarded. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20220504155322.121431-4-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: stm32-mdma: fix chan initialization in stm32_mdma_irq_handler()Amelie Delaunay1-1/+1
The parameter to pass back to the handler function when irq has been requested is a struct stm32_mdma_device pointer, not a struct stm32_mdma_chan pointer. Even if chan is reinit later in the function, remove this wrong initialization. Fixes: a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver") Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20220504155322.121431-3-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: stm32-mdma: remove GISR1 registerAmelie Delaunay1-16/+5
GISR1 was described in a not up-to-date documentation when the stm32-mdma driver has been developed. This register has not been added in reference manual of STM32 SoC with MDMA, which have only 32 MDMA channels. So remove it from stm32-mdma driver. Fixes: a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver") Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20220504155322.121431-2-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: ti: deprecate '#dma-channels'Krzysztof Kozlowski1-1/+5
The generic property, used in most of the drivers and defined in generic dma-common DT bindings, is 'dma-channels'. Switch to new property while keeping backward compatibility. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220427161126.647073-4-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: mmp: deprecate '#dma-channels'Krzysztof Kozlowski1-5/+9
The generic property, used in most of the drivers and defined in generic dma-common DT bindings, is 'dma-channels'. Switch to new property while keeping backward compatibility. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220503065407.52188-4-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: pxa: deprecate '#dma-channels' and '#dma-requests'Krzysztof Kozlowski1-3/+10
The generic properties, used in most of the drivers and defined in generic dma-common DT bindings, are 'dma-channels' and 'dma-requests'. Switch to new properties while keeping backward compatibility. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220503065407.52188-3-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: tegra: Fix build error without IOMMU_APIYueHaibing1-0/+1
drivers/dma/tegra186-gpc-dma.c: In function ‘tegra_dma_probe’: drivers/dma/tegra186-gpc-dma.c:1364:24: error: ‘struct iommu_fwspec’ has no member named ‘ids’ stream_id = iommu_spec->ids[0] & 0xffff; ^~ Make TEGRA186_GPC_DMA depends on IOMMU_API to fix this. Fixes: ee17028009d4 ("dmaengine: tegra: Add tegra gpcdma driver") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20220505093236.15076-1-yuehaibing@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: dw: Add RZN1 compatibleMiquel Raynal1-0/+1
The Renesas RZN1 DMA IP is very close to the original DW DMA IP, a DMA router has been introduced to handle the wiring options that have been added. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20220427095653.91804-8-miquel.raynal@bootlin.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: dw: dmamux: Introduce RZN1 DMA router supportMiquel Raynal3-0/+166
The Renesas RZN1 DMA IP is based on a DW core, with eg. an additional dmamux register located in the system control area which can take up to 32 requests (16 per DMA controller). Each DMA channel can be wired to two different peripherals. We need two additional information from the 'dmas' property: the channel (bit in the dmamux register) that must be accessed and the value of the mux for this channel. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220427095653.91804-6-miquel.raynal@bootlin.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-16dmaengine: idxd: Remove unnecessary synchronize_irq() before free_irq()Minghao Chi1-1/+0
Calling synchronize_irq() right before free_irq() is quite useless. On one hand the IRQ can easily fire again before free_irq() is entered, on the other hand free_irq() itself calls synchronize_irq() internally (in a race condition free way), before any state associated with the IRQ is freed. Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220516115412.1651772-1-chi.minghao@zte.com.cn Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-16dmaengine: idxd: add missing callback function to support DMA_INTERRUPTDave Jiang1-0/+22
When setting DMA_INTERRUPT capability, a callback function dma->device_prep_dma_interrupt() is needed to support this capability. Without setting the callback, dma_async_device_register() will fail dma capability check. Fixes: 4e5a4eb20393 ("dmaengine: idxd: set DMA_INTERRUPT cap bit") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/165101232637.3951447.15765792791591763119.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-16dmaengine: sprd: deprecate '#dma-channels'Krzysztof Kozlowski1-1/+5
The generic property, used in most of the drivers and defined in generic dma-common DT bindings, is 'dma-channels'. Switch to new property while keeping backward compatibility. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/20220503065147.51728-3-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-16dmaengine: idxd: skip irq free when wq type is not kernelDave Jiang1-0/+3
Skip wq irq resources freeing when wq type is not kernel since the driver skips the irq alloction during wq enable. Add check in wq type check in idxd_wq_free_irq() to mirror idxd_wq_request_irq(). Fixes: 63c14ae6c161 ("dmaengine: idxd: refactor wq driver enable/disable operations") Reported-by: Tony Zu <tony.zhu@intel.com> Tested-by: Tony Zu <tony.zhu@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/165176310726.2112428.7474366910758522079.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-16dmaengine: idxd: make idxd_register/unregister_dma_channel() staticDave Jiang2-4/+2
Since idxd_register/unregister_dma_channel() are only called locally, make them static. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/165187583222.3287435.12882651040433040246.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-16dmaengine: zynqmp_dma: use pm_runtime_resume_and_get() instead of ↵Radhey Shyam Pandey1-1/+5
pm_runtime_get_sync() pm_runtime_resume_and_get() automatically handle dev->power.usage_count decrement on errors, so prefer using it and also implement it's error handling. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1652166762-18317-4-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-16dmaengine: zynqmp_dma: check dma_async_device_register return valueShravya Kumbham1-1/+5
Add condition to check the return value of dma_async_device_register and implement its error handling. Addresses-Coverity: Event check_return. Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1652166762-18317-3-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-16dmaengine: zynqmp_dma: In struct zynqmp_dma_chan fix desc_size data typeRadhey Shyam Pandey1-2/+3
In zynqmp_dma_alloc/free_chan_resources functions there is a potential overflow in the below expressions. dma_alloc_coherent(chan->dev, (2 * chan->desc_size * ZYNQMP_DMA_NUM_DESCS), &chan->desc_pool_p, GFP_KERNEL); dma_free_coherent(chan->dev,(2 * ZYNQMP_DMA_DESC_SIZE(chan) * ZYNQMP_DMA_NUM_DESCS), chan->desc_pool_v, chan->desc_pool_p); The arguments desc_size and ZYNQMP_DMA_NUM_DESCS were 32 bit. Though this overflow condition is not observed but it is a potential problem in the case of 32-bit multiplication. Hence fix it by changing the desc_size data type to size_t. In addition to coverity fix it also reuse ZYNQMP_DMA_DESC_SIZE macro in dma_alloc_coherent API argument. Addresses-Coverity: Event overflow_before_widen. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1652166762-18317-2-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-16dmaengine: idxd: remove redudant idxd_wq_disable_cleanup() callDave Jiang1-1/+0
idxd_wq_device_reset_cleanup() already calls idxd_wq_disable_cleanup(). There is no need to call idxd_wq_disable_cleanup() again in idxd_device_wqs_clear_state(). Remove redudant call from idxd_wq_device_reset_cleanup(). Fixes: 0dcfe41e9a4c ("dmanegine: idxd: cleanup all device related bits after disabling device") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/165231365717.986350.2441351765955825964.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-16dmaengine: idxd: free irq before wq type is resetDave Jiang1-1/+1
Call idxd_wq_free_irq() in the drv_disable_wq() function before idxd_wq_reset() is called. Otherwise the wq type is reset and the irq does not get freed. Fixes: 63c14ae6c161 ("dmaengine: idxd: refactor wq driver enable/disable operations") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/165231367316.986407.11001767338124941736.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-16dmaengine: idxd: fix lockdep warning on device driver removalDave Jiang1-7/+7
Jacob reported that with lockdep debug turned on, idxd_device_driver removal causes kernel splat from lock assert warning for idxd_device_wqs_clear_state(). Make sure idxd_device_wqs_clear_state() holds the wq lock for each wq when cleaning the wq state. Move the call outside of the device spinlock. Reported-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/165231364426.986304.9294302800482492780.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-16dmaengine: idxd: Separate user and kernel pasid enablingDave Jiang5-23/+35
The idxd driver always gated the pasid enabling under a single knob and this assumption is incorrect. The pasid used for kernel operation can be independently toggled and has no dependency on the user pasid (and vice versa). Split the two so they are independent "enabled" flags. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/165231431746.986466.5666862038354800551.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-16dmaengine: idxd: Fix the error handling path in idxd_cdev_register()Christophe JAILLET1-1/+7
If a call to alloc_chrdev_region() fails, the already allocated resources are leaking. Add the needed error handling path to fix the leak. Fixes: 42d279f9137a ("dmaengine: idxd: add char driver to expose submission portal to userland") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/1b5033dcc87b5f2a953c413f0306e883e6114542.1650521591.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-16dmaengine: tegra: Use platform_get_irq() to get IRQ resourceAkhil R1-8/+4
Use platform_irq_get() instead platform_get_resource() for IRQ resource to fix the probe failure. platform_get_resource() fails to fetch the IRQ resource as it might not be ready at that time. platform_irq_get() is also the recommended way to get interrupt as it directly gives the IRQ number and no conversion from resource is required. Fixes: ee17028009d4 ("dmaengine: tegra: Add tegra gpcdma driver") Reported-by: Jonathan Hunter <jonathanh@nvidia.com> Signed-off-by: Akhil R <akhilrajeev@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20220505091440.12981-1-akhilrajeev@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-22dma: omap: hide legacy interfaceArnd Bergmann1-6/+13
The legacy interface for omap-dma is only used on OMAP1, and the same is true for the non-DT case. Make both of these conditional on CONFIG_ARCH_OMAP1 being set to simplify the dependency. The non-OMAP stub functions in include/linux/omap-dma.h are note needed any more either now, because they are only called on OMAP1. Acked-by: Tony Lindgren <tony@atomide.com> Acked-By: Vinod Koul <vkoul@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-22dmaengine: mv_xor_v2 : Move spin_lock_bh() to spin_lock()Yunbo Yu1-2/+2
It is unnecessary to call spin_lock_bh() for that you are already in a tasklet. Signed-off-by: Yunbo Yu <yuyunbo519@gmail.com> Link: https://lore.kernel.org/r/20220420122754.148359-1-yuyunbo519@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-22dmaengine: idxd: refactor wq driver enable/disable operationsDave Jiang4-61/+43
Move the core driver operations from wq driver to the drv_enable_wq() and drv_disable_wq() functions. The move should reduce the wq driver's knowledge of the core driver operations and prevent code confusion for future wq drivers. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/165047301643.3841827.11222723219862233060.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-22dmaengine: ti: k3-psil-am62: Update PSIL thread for saul.Jayesh Choudhary1-4/+4
Correct the RX PSIL thread for sa3ul. Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> Fixes: 5ac6bfb587772 ("dmaengine: ti: k3-psil: Add AM62x PSIL and PDMA data") Link: https://lore.kernel.org/r/20220421065323.16378-1-j-choudhary@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-22dmaengine: ptdma: statify pt_tx_statusVinod Koul1-1/+1
LKP bot reports a new warning: Warning: drivers/dma/ptdma/ptdma-dmaengine.c:262:1: warning: no previous prototype for 'pt_tx_status' [-Wmissing-prototypes] pt_tx_status() should be static, so declare as such. Reported-by: kernel test robot <lkp@intel.com> Fixes: d965068259d1 ("dmaengine: PTDMA: support polled mode") Link: https://lore.kernel.org/r/20220421052407.745637-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20dmaengine: hidma: In hidma_prep_dma_memset treat value as a single byteBen Walker1-1/+12
The value parameter is a single byte, so duplicate it to the 8 byte range that is used as the pattern. Signed-off-by: Ben Walker <benjamin.walker@intel.com> Cc: Sinan Kaya <okaya@kernel.org> Link: https://lore.kernel.org/r/20220301182551.883474-5-benjamin.walker@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20dmaengine: at_xdmac: In at_xdmac_prep_dma_memset, treat value as a single byteBen Walker1-1/+8
The value passed in to .prep_dma_memset is to be treated as a single byte repeating pattern. Signed-off-by: Ben Walker <benjamin.walker@intel.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20220301182551.883474-4-benjamin.walker@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20dmaengine: at_hdmac: In atc_prep_dma_memset, treat value as a single byteBen Walker1-1/+9
The value passed in to .prep_dma_memset is to be treated as a single byte repeating pattern. Signed-off-by: Ben Walker <benjamin.walker@intel.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20220301182551.883474-3-benjamin.walker@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20dmaengine: idxd: move wq irq enabling to after device enableDave Jiang1-9/+9
Move the calling of request_irq() and other related irq setup code until after the WQ is successfully enabled. This reduces the amount of setup/teardown if the wq is not configured correctly and cannot be enabled. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/164642777730.179702.1880317757087484299.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20dmaengine: idxd: skip clearing device context when device is read-onlyDave Jiang1-0/+3
If the device shows up as read-only configuration, skip the clearing of the state as the context must be preserved for device re-enable after being disabled. Fixes: 0dcfe41e9a4c ("dmanegine: idxd: cleanup all device related bits after disabling device") Reported-by: Tony Zhu <tony.zhu@intel.com> Tested-by: Tony Zhu <tony.zhu@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/164971479479.2200566.13980022473526292759.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20dmaengine: idxd: add RO check for wq max_transfer_size writeDave Jiang1-0/+3
Block wq_max_transfer_size_store() when the device is configured as read-only and not configurable. Fixes: d7aad5550eca ("dmaengine: idxd: add support for configurable max wq xfer size") Reported-by: Bernice Zhang <bernice.zhang@intel.com> Tested-by: Bernice Zhang <bernice.zhang@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/164971488154.2200913.10706665404118545941.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20dmaengine: idxd: add RO check for wq max_batch_size writeDave Jiang1-0/+3
Block wq_max_batch_size_store() when the device is configured as read-only and not configurable. Fixes: e7184b159dd3 ("dmaengine: idxd: add support for configurable max wq batch size") Reported-by: Bernice Zhang <bernice.zhang@intel.com> Tested-by: Bernice Zhang <bernice.zhang@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/164971493551.2201159.1942042593642155209.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-11 10:33:03 +0000