summaryrefslogtreecommitdiffstats
path: root/drivers/dma
AgeCommit message (Collapse)AuthorFilesLines
2018-10-25Merge tag 'pci-v4.20-changes' of ↵Linus Torvalds1-7/+0
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Fix ASPM link_state teardown on removal (Lukas Wunner) - Fix misleading _OSC ASPM message (Sinan Kaya) - Make _OSC optional for PCI (Sinan Kaya) - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set (Patrick Talbert) - Remove x86 and arm64 node-local allocation for host bridge structures (Punit Agrawal) - Pay attention to device-specific _PXM node values (Jonathan Cameron) - Support new Immediate Readiness bit (Felipe Balbi) - Differentiate between pciehp surprise and safe removal (Lukas Wunner) - Remove unnecessary pciehp includes (Lukas Wunner) - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner) - Tolerate PCIe Slot Presence Detect being hardwired to zero to workaround broken hardware, e.g., the Wilocity switch/wireless device (Lukas Wunner) - Unify pciehp controller & slot structs (Lukas Wunner) - Constify hotplug_slot_ops (Lukas Wunner) - Drop hotplug_slot_info (Lukas Wunner) - Embed hotplug_slot struct into users instead of allocating it separately (Lukas Wunner) - Initialize PCIe port service drivers directly instead of relying on initcall ordering (Keith Busch) - Restore PCI config state after a slot reset (Keith Busch) - Save/restore DPC config state along with other PCI config state (Keith Busch) - Reference count devices during AER handling to avoid race issue with concurrent hot removal (Keith Busch) - If an Upstream Port reports ERR_FATAL, don't try to read the Port's config space because it is probably unreachable (Keith Busch) - During error handling, use slot-specific reset instead of secondary bus reset to avoid link up/down issues on hotplug ports (Keith Busch) - Restore previous AER/DPC handling that does not remove and re-enumerate devices on ERR_FATAL (Keith Busch) - Notify all drivers that may be affected by error recovery resets (Keith Busch) - Always generate error recovery uevents, even if a driver doesn't have error callbacks (Keith Busch) - Make PCIe link active reporting detection generic (Keith Busch) - Support D3cold in PCIe hierarchies during system sleep and runtime, including hotplug and Thunderbolt ports (Mika Westerberg) - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots are empty or occupied (Jon Derrick) - Remove duplicated include from pci/pcie/err.c and unused variable from cpqphp (YueHaibing) - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza Pawandeep) - Uninline PCI bus accessors for better ftracing (Keith Busch) - Remove unused AER Root Port .error_resume method (Keith Busch) - Use kfifo in AER instead of a local version (Keith Busch) - Use threaded IRQ in AER bottom half (Keith Busch) - Use managed resources in AER core (Keith Busch) - Reuse pcie_port_find_device() for AER injection (Keith Busch) - Abstract AER interrupt handling to disconnect error injection (Keith Busch) - Refactor AER injection callbacks to simplify future improvments (Keith Busch) - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski) - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko) - Add switch fall-through annotations (Gustavo A. R. Silva) - Remove unused Switchtec quirk variable (Joshua Abraham) - Fix pci.c kernel-doc warning (Randy Dunlap) - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig) - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng) - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid useless dmesg errors (Logan Gunthorpe) - Update Switchtec NTB documentation (Wesley Yung) - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz) - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang) - Add PCI support for peer-to-peer DMA (Logan Gunthorpe) - Add sysfs group for PCI peer-to-peer memory statistics (Logan Gunthorpe) - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan Gunthorpe) - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan Gunthorpe) - Add PCI peer-to-peer DMA driver writer's documentation (Logan Gunthorpe) - Add block layer flag to indicate driver support for PCI peer-to-peer DMA (Logan Gunthorpe) - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P memory (Logan Gunthorpe) - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan Gunthorpe) - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan Gunthorpe) - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise, Christoph Hellwig, Logan Gunthorpe) - Cache VF config space size to optimize enumeration of many VFs (KarimAllah Ahmed) - Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas) - Fix VMD AERSID quirk Device ID matching (Jon Derrick) - Fix Cadence PHY handling during probe (Alan Douglas) - Signal Cadence Endpoint interrupts via AXI region 0 instead of last region (Alan Douglas) - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan Douglas) - Remove redundant controller tests for "device_type == pci" (Rob Herring) - Document R-Car E3 (R8A77990) bindings (Tho Vu) - Add device tree support for R-Car r8a7744 (Biju Das) - Drop unused mvebu PCIe capability code (Thomas Petazzoni) - Add shared PCI bridge emulation code (Thomas Petazzoni) - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni) - Add aardvark Root Port emulation (Thomas Petazzoni) - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach) - Add initial power management for i.MX7 (Leonard Crestez) - Add PME_Turn_Off support for i.MX7 (Leonard Crestez) - Fix qcom runtime power management error handling (Bjorn Andersson) - Update TI dra7xx unaligned access errata workaround for host mode as well as endpoint mode (Vignesh R) - Fix kirin section mismatch warning (Nathan Chancellor) - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare) - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I) - Update Keystone to use MRRS quirk for host bridge instead of open coding (Kishon Vijay Abraham I) - Refactor Keystone link establishment (Kishon Vijay Abraham I) - Simplify and speed up Keystone link training (Kishon Vijay Abraham I) - Remove unused Keystone host_init argument (Kishon Vijay Abraham I) - Merge Keystone driver files into one (Kishon Vijay Abraham I) - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay Abraham I) - Rename Keystone functions for uniformity (Kishon Vijay Abraham I) - Add Keystone device control module DT binding (Kishon Vijay Abraham I) - Use SYSCON API to get Keystone control module device IDs (Kishon Vijay Abraham I) - Clean up Keystone PHY handling (Kishon Vijay Abraham I) - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I) - Clean up Keystone config space access checks (Kishon Vijay Abraham I) - Get Keystone outbound window count from DT (Kishon Vijay Abraham I) - Clean up Keystone outbound window configuration (Kishon Vijay Abraham I) - Clean up Keystone DBI setup (Kishon Vijay Abraham I) - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I) - Fix Keystone IRQ status checking (Kishon Vijay Abraham I) - Add debug messages for all Keystone errors (Kishon Vijay Abraham I) - Clean up Keystone includes and macros (Kishon Vijay Abraham I) - Fix Mediatek unchecked return value from devm_pci_remap_iospace() (Gustavo A. R. Silva) - Fix Mediatek endpoint/port matching logic (Honghui Zhang) - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui Zhang) - Remove redundant Mediatek PM domain check (Honghui Zhang) - Convert Mediatek to pci_host_probe() (Honghui Zhang) - Fix Mediatek MSI enablement (Honghui Zhang) - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang) - Add Mediatek loadable module support (Honghui Zhang) - Detach VMD resources after stopping root bus to prevent orphan resources (Jon Derrick) - Convert pcitest build process to that used by other tools (iio, perf, etc) (Gustavo Pimentel) * tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI/AER: Refactor error injection fallbacks PCI/AER: Abstract AER interrupt handling PCI/AER: Reuse existing pcie_port_find_device() interface PCI/AER: Use managed resource allocations PCI: pcie: Remove redundant 'default n' from Kconfig PCI: aardvark: Implement emulated root PCI bridge config space PCI: mvebu: Convert to PCI emulated bridge config space PCI: mvebu: Drop unused PCI express capability code PCI: Introduce PCI bridge emulated config space common logic PCI: vmd: Detach resources after stopping root bus nvmet: Optionally use PCI P2P memory nvmet: Introduce helper functions to allocate and free request SGLs nvme-pci: Add support for P2P memory in requests nvme-pci: Use PCI p2pmem subsystem to manage the CMB IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]() block: Add PCI P2P flag for request queue PCI/P2PDMA: Add P2P DMA driver writer's documentation docs-rst: Add a new directory for PCI documentation PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset ...
2018-10-25Merge tag 'dmaengine-4.20-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds44-961/+1941
Pull dmaengine updates from Vinod Koul: - Support for ColdFire mcf5441x edma controller - Support for link list mode in sprd dma - More users of managed dmaenginem_async_device_register API - Cyclic mode support in owl dma driver - DT updates for renesas drivers, dma-jz4780 updates and support for JZ4770, JZ4740 and JZ4725B controllers - Removal of deprecated dma_slave_config direction in dmaengine drivers, few more users will be removed in next cycle and eventually removed. - Minor updates to idma64, ioat, pxa, ppc drivers * tag 'dmaengine-4.20-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (66 commits) dmaengine: ppc4xx: fix off-by-one build failure dmaengine: owl: Fix warnings generated during build dmaengine: fsl-edma: remove dma_slave_config direction usage dmaengine: rcar-dmac: set scatter/gather max segment size dmaengine: mmp_tdma: remove dma_slave_config direction usage dmaengine: ep93xx_dma: remove dma_slave_config direction usage dmaengine: k3dma: remove dma_slave_config direction usage dmaengine: k3dma: dont use direction for memcpy dmaengine: imx-dma: remove dma_slave_config direction usage dmaengine: idma: remove dma_slave_config direction usage dmaengine: hsu: remove dma_slave_config direction usage dmaengine: dw: remove dma_slave_config direction usage dmaengine: jz4740: remove dma_slave_config direction usage dmaengine: coh901318: remove dma_slave_config direction usage dmaengine: bcm2835: remove dma_slave_config direction usage dmaengine: at_hdmac: remove dma_slave_config direction usage dmaengine: owl: Add Slave and Cyclic mode support for Actions Semi Owl S900 SoC dmaengine: ioat: fix prototype of ioat_enumerate_channels dmaengine: stm32-dma: check whether length is aligned on FIFO threshold dt-bindings: dmaengine: usb-dmac: Add binding for r8a7744 ...
2018-10-24Merge branch 'topic/stm' into for-linusVinod Koul1-14/+6
2018-10-24Merge branch 'topic/sprd' into for-linusVinod Koul1-7/+74
2018-10-24Merge branch 'topic/renesas' into for-linusVinod Koul10-38/+12
2018-10-24Merge branch 'topic/owl' into for-linusVinod Koul1-7/+276
2018-10-24Merge branch 'topic/of' into for-linusVinod Koul1-2/+2
2018-10-24Merge branch 'topic/mv' into for-linusVinod Koul1-2/+2
2018-10-24Merge branch 'topic/jz' into for-linusVinod Koul2-79/+204
2018-10-24Merge branch 'topic/intel' into for-linusVinod Koul2-8/+13
2018-10-24Merge branch 'topic/fsl' into for-linusVinod Koul7-714/+1209
2018-10-24Merge branch 'topic/dw' into for-linusVinod Koul1-0/+2
2018-10-24Merge branch 'topic/dmam' into for-linusVinod Koul8-36/+16
2018-10-24Merge branch 'topic/dirn_remove' into for-linusVinod Koul11-50/+121
2018-10-24Merge branch 'topic/at' into for-linusVinod Koul1-2/+2
2018-10-16dmaengine: ppc4xx: fix off-by-one build failureChristian Lamparter1-1/+1
There are two poly_store, but one should have been poly_show. |adma.c:4382:16: error: conflicting types for 'poly_store' | static ssize_t poly_store(struct device_driver *dev, const char *buf, | ^~~~~~~~~~ |adma.c:4363:16: note: previous definition of 'poly_store' was here | static ssize_t poly_store(struct device_driver *dev, char *buf) | ^~~~~~~~~~ CC: stable@vger.kernel.org Fixes: 13efe1a05384 ("dmaengine: ppc4xx: remove DRIVER_ATTR() usage") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-10-15dmaengine: owl: Fix warnings generated during buildManivannan Sadhasivam1-0/+4
Following warnings are generated when compiled with W=1, drivers/dma/owl-dma.c:170: warning: Function parameter or member 'cyclic' not described in 'owl_dma_txd' drivers/dma/owl-dma.c:198: warning: Function parameter or member 'cfg' not described in 'owl_dma_vchan' drivers/dma/owl-dma.c:198: warning: Function parameter or member 'drq' not described in 'owl_dma_vchan' drivers/dma/owl-dma.c:225: warning: Function parameter or member 'irq' not described in 'owl_dma' Fix this by adding comments for relevant struct members to appear in kernel-doc. Fixes: d64e1b3f5cce ("dmaengine: owl: Add Slave and Cyclic mode support for Actions Semi Owl S900 SoC") Reported-by: Vinod Koul <vinod.koul@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-10-09dmaengine: fsl-edma: remove dma_slave_config direction usageVinod Koul2-40/+46
dma_slave_config direction was marked as deprecated quite some time back, remove the usage from this driver so that the field can be removed Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Angelo Dureghello <angelo@sysam.it> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-10-07dmaengine: rcar-dmac: set scatter/gather max segment sizeWolfram Sang1-0/+3
Fix warning when running with CONFIG_DMA_API_DEBUG_SG=y by allocating a device_dma_parameters structure and filling in the max segment size. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-10-07dmaengine: mmp_tdma: remove dma_slave_config direction usageVinod Koul1-2/+20
dma_slave_config direction was marked as deprecated quite some time back, remove the usage from this driver so that the field can be removed Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-10-07dmaengine: ep93xx_dma: remove dma_slave_config direction usageVinod Koul1-1/+20
dma_slave_config direction was marked as deprecated quite some time back, remove the usage from this driver so that the field can be removed Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-10-07dmaengine: k3dma: remove dma_slave_config direction usageVinod Koul1-6/+20
dma_slave_config direction was marked as deprecated quite some time back, remove the usage from this driver so that the field can be removed Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-10-07dmaengine: k3dma: dont use direction for memcpyVinod Koul1-8/+2
Memcpy has no direction (copy from memory to memory) so remove the check in prep_memcpy() Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-10-07dmaengine: imx-dma: remove dma_slave_config direction usageVinod Koul1-3/+17
dma_slave_config direction was marked as deprecated quite some time back, remove the usage from this driver so that the field can be removed Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-10-07dmaengine: idma: remove dma_slave_config direction usageVinod Koul1-4/+0
dma_slave_config direction was marked as deprecated quite some time back, remove the usage from this driver so that the field can be removed Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-10-07dmaengine: hsu: remove dma_slave_config direction usageVinod Koul1-4/+0
dma_slave_config direction was marked as deprecated quite some time back, remove the usage from this driver so that the field can be removed Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-10-07dmaengine: dw: remove dma_slave_config direction usageVinod Koul1-5/+0
dma_slave_config direction was marked as deprecated quite some time back, remove the usage from this driver so that the field can be removed Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-10-07dmaengine: jz4740: remove dma_slave_config direction usageVinod Koul1-3/+18
dma_slave_config direction was marked as deprecated quite some time back, remove the usage from this driver so that the field can be removed Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-10-07dmaengine: coh901318: remove dma_slave_config direction usageVinod Koul1-5/+23
dma_slave_config direction was marked as deprecated quite some time back, remove the usage from this driver so that the field can be removed Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-10-07dmaengine: bcm2835: remove dma_slave_config direction usageVinod Koul1-8/+0
dma_slave_config direction was marked as deprecated quite some time back, remove the usage from this driver so that the field can be removed Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-10-07dmaengine: at_hdmac: remove dma_slave_config direction usageVinod Koul1-1/+1
dma_slave_config direction was marked as deprecated quite some time back, remove the usage from this driver so that the field can be removed Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-10-05dmaengine: owl: Add Slave and Cyclic mode support for Actions Semi Owl S900 SoCManivannan Sadhasivam1-7/+272
Add Slave and Cyclic mode support for Actions Semi Owl S900 SoC. The slave mode supports bus width of 4 bytes common for all peripherals and 1 byte specific for UART. The cyclic mode supports only block mode transfer. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-10-05dmaengine: ioat: fix prototype of ioat_enumerate_channelsRami Rosen1-4/+3
Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-10-02PCI/AER: Remove pci_cleanup_aer_uncorrect_error_status() callsOza Pawandeep1-7/+0
After bfcb79fca19d ("PCI/ERR: Run error recovery callbacks for all affected devices"), AER errors are always cleared by the PCI core and drivers don't need to do it themselves. Remove calls to pci_cleanup_aer_uncorrect_error_status() from device driver error recovery functions. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> [bhelgaas: changelog, remove PCI core changes, remove unused variables] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-10-02dmaengine: stm32-dma: check whether length is aligned on FIFO thresholdPierre-Yves MORDRET1-14/+6
When a period length is not multiple of FIFO some data may be stuck within FIFO. Burst/FIFO Threshold/Period or buffer length check has to be hardened In any case DMA will grant any request from client but will degraded any parameters whether awkward. Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-10-02dmaengine: timb_dma: Use proper enum in td_prep_slave_sgNathan Chancellor1-1/+1
Clang warns when implicitly converting from one enumerated type to another. Avoid this by using the equivalent value from the expected type. drivers/dma/timb_dma.c:548:27: warning: implicit conversion from enumeration type 'enum dma_transfer_direction' to different enumeration type 'enum dma_data_direction' [-Wenum-conversion] td_desc->desc_list_len, DMA_MEM_TO_DEV); ^~~~~~~~~~~~~~ 1 warning generated. Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-09-18driver/dma/ioat: Call del_timer_sync() without holding prep_lockWaiman Long1-1/+8
The following lockdep splat was observed: [ 1222.241750] ====================================================== [ 1222.271301] WARNING: possible circular locking dependency detected [ 1222.301060] 4.16.0-10.el8+5.x86_64+debug #1 Not tainted [ 1222.326659] ------------------------------------------------------ [ 1222.356565] systemd-shutdow/1 is trying to acquire lock: [ 1222.382660] ((&ioat_chan->timer)){+.-.}, at: [<00000000f71e1a28>] del_timer_sync+0x5/0xf0 [ 1222.422928] [ 1222.422928] but task is already holding lock: [ 1222.451743] (&(&ioat_chan->prep_lock)->rlock){+.-.}, at: [<000000008ea98b12>] ioat_shutdown+0x86/0x100 [ioatdma] : [ 1223.524987] Chain exists of: [ 1223.524987] (&ioat_chan->timer) --> &(&ioat_chan->cleanup_lock)->rlock --> &(&ioat_chan->prep_lock)->rlock [ 1223.524987] [ 1223.594082] Possible unsafe locking scenario: [ 1223.594082] [ 1223.622630] CPU0 CPU1 [ 1223.645080] ---- ---- [ 1223.667404] lock(&(&ioat_chan->prep_lock)->rlock); [ 1223.691535] lock(&(&ioat_chan->cleanup_lock)->rlock); [ 1223.728657] lock(&(&ioat_chan->prep_lock)->rlock); [ 1223.765122] lock((&ioat_chan->timer)); [ 1223.784095] [ 1223.784095] *** DEADLOCK *** [ 1223.784095] [ 1223.813492] 4 locks held by systemd-shutdow/1: [ 1223.834677] #0: (reboot_mutex){+.+.}, at: [<0000000056d33456>] SYSC_reboot+0x10f/0x300 [ 1223.873310] #1: (&dev->mutex){....}, at: [<00000000258dfdd7>] device_shutdown+0x1c8/0x660 [ 1223.913604] #2: (&dev->mutex){....}, at: [<0000000068331147>] device_shutdown+0x1d6/0x660 [ 1223.954000] #3: (&(&ioat_chan->prep_lock)->rlock){+.-.}, at: [<000000008ea98b12>] ioat_shutdown+0x86/0x100 [ioatdma] In the ioat_shutdown() function: spin_lock_bh(&ioat_chan->prep_lock); set_bit(IOAT_CHAN_DOWN, &ioat_chan->state); del_timer_sync(&ioat_chan->timer); spin_unlock_bh(&ioat_chan->prep_lock); According to the synchronization rule for the del_timer_sync() function, the caller must not hold locks which would prevent completion of the timer's handler. The timer structure has its own lock that manages its synchronization. Setting the IOAT_CHAN_DOWN bit should prevent other CPUs from trying to use that device anyway, there is probably no need to call del_timer_sync() while holding the prep_lock. So the del_timer_sync() call is now moved outside of the prep_lock critical section to prevent the circular lock dependency. Signed-off-by: Waiman Long <longman@redhat.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-09-18dmaengine: mcf-edma: avoid warning for wrong pointer castAngelo Dureghello1-1/+1
This patch fixes the following compilation warning reported during x86_64 allmodconfig build: drivers/dma/mcf-edma.c: In function 'mcf_edma_filter_fn': drivers/dma/mcf-edma.c:296:33: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] return (mcf_chan->slave_id == (u32)param); Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Angelo Dureghello <angelo@sysam.it> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-09-11dmaengine: idma64: replace spin_lock_irqsave with spin_lockZhaoxiong Yuan1-3/+2
idma64_chan_irq() is invoked in hardirq handle function, it is unnecessary to call spin_lock_irqsave. Signed-off-by: Zhaoxiong Yuan <yuanzhx326@gmail.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-09-11dmaengine: dma-jz4780: Use dma_set_residue()Daniel Silsby1-4/+5
This is the standard method provided by dmaengine header. Signed-off-by: Daniel Silsby <dansilsby@gmail.com> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-09-11dmaengine: dma-jz4780: Further residue status fixDaniel Silsby1-1/+1
Func jz4780_dma_desc_residue() expects the index to the next hw descriptor as its last parameter. Caller func jz4780_dma_tx_status(), however, applied modulus before passing it. When the current hw descriptor was last in the list, the index passed became zero. The resulting excess of reported residue especially caused problems with cyclic DMA transfer clients, i.e. ALSA AIC audio output, which rely on this for determining current DMA location within buffer. Combined with the recent and related residue-reporting fixes, spurious ALSA audio underruns on jz4770 hardware are now fixed. Signed-off-by: Daniel Silsby <dansilsby@gmail.com> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-09-11dmaengine: dma-jz4780: Set DTCn register explicitlyDaniel Silsby1-0/+9
Normally, we wouldn't set the channel transfer count register directly when using descriptor-driven transfers. However, there is no harm in doing so, and it allows jz4780_dma_desc_residue() to report the correct residue of an ongoing transfer, no matter when it is called. Signed-off-by: Daniel Silsby <dansilsby@gmail.com> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-09-11dmaengine: dma-jz4780: Simplify jz4780_dma_desc_residue()Daniel Silsby1-10/+5
Simple cleanup, no changes to actual logic here. Signed-off-by: Daniel Silsby <dansilsby@gmail.com> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-09-11dmaengine: dma-jz4780: Add missing residue DTC maskDaniel Silsby1-1/+2
The 'dtc' word in jz DMA descriptors contains two fields: The lowest 24 bits are the transfer count, and upper 8 bits are the DOA offset to next descriptor. The upper 8 bits are now correctly masked off when computing residue in jz4780_dma_desc_residue(). Note that reads of the DTCn hardware reg are automatically masked this way. Signed-off-by: Daniel Silsby <dansilsby@gmail.com> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-09-11dmaengine: dma-jz4780: Enable Fast DMA to the AICPaul Cercueil1-2/+3
With the fast DMA bit set, the DMA will transfer twice as much data per clock period to the AIC, so there is little point not to set it. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Mathieu Malaterre <malat@debian.org> Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-09-11dmaengine: dma-jz4780: Add support for the JZ4725B SoCPaul Cercueil1-3/+20
The JZ4725B has one DMA core starring six DMA channels. As for the JZ4770, each DMA channel's clock can be enabled with a register write, the difference here being that once started, it is not possible to turn it off. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Mathieu Malaterre <malat@debian.org> Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-09-11dmaengine: dma-jz4780: Add support for the JZ4740 SoCPaul Cercueil1-0/+6
The JZ4740 SoC has a single DMA core starring six DMA channels. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Mathieu Malaterre <malat@debian.org> Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-09-11dmaengine: dma-jz4780: Add support for the JZ4770 SoCPaul Cercueil1-7/+54
The JZ4770 SoC has two DMA cores, each one featuring six DMA channels. The major change is that each channel's clock can be enabled or disabled through register writes. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-09-11dmaengine: dma-jz4780: Don't depend on MACH_JZ4780Paul Cercueil1-1/+1
If we make this driver depend on MACH_JZ4780, that means it can be enabled only if we're building a kernel specially crafted for a JZ4780-based board, while most GNU/Linux distributions will want one generic MIPS kernel that works on multiple boards. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-09-11dmaengine: dma-jz4780: Use 4-word descriptorsPaul Cercueil1-12/+9
The only information we use in the 8-word version of the hardware DMA descriptor that is not present in the 4-word version is the transfer type, aka. the ID of the source or recipient device. Since the transfer type will never change for a DMA channel in use, we can just set it once for all in the corresponding DMA register before starting any transfer. This has several benefits: * the driver will handle twice as many hardware DMA descriptors; * the driver is closer to support the JZ4740, which only supports 4-word hardware DMA descriptors; * the JZ4770 SoC needs the transfer type to be set in the corresponding DMA register anyway, even if 8-word descriptors are in use. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Mathieu Malaterre <malat@debian.org> Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>