summaryrefslogtreecommitdiffstats
path: root/drivers/dma
AgeCommit message (Collapse)AuthorFilesLines
2022-11-08dmaengine: at_hdmac: Check return code of dma_async_device_registerTudor Ambarus1-1/+6
dma_async_device_register() can fail, check the return code and display an error. Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: stable@vger.kernel.org Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-16-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-08dmaengine: at_hdmac: Fix impossible conditionTudor Ambarus1-3/+4
The iterator can not be greater than ATC_MAX_DSCR_TRIALS, as the for loop will stop when i == ATC_MAX_DSCR_TRIALS. While here, use the common "i" name for the iterator. Fixes: 93dce3a6434f ("dmaengine: at_hdmac: fix residue computation") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: stable@vger.kernel.org Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-15-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-08dmaengine: at_hdmac: Don't allow CPU to reorder channel enableTudor Ambarus1-0/+2
at_hdmac uses __raw_writel for register writes. In the absence of a barrier, the CPU may reorder the register operations. Introduce a write memory barrier so that the CPU does not reorder the channel enable, thus the start of the transfer, without making sure that all the pre-required register fields are already written. Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller") Reported-by: Peter Rosin <peda@axentia.se> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/ Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-14-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-08dmaengine: at_hdmac: Fix completion of unissued descriptor in case of errorsTudor Ambarus1-4/+0
In case the controller detected an error, the code took the chance to move all the queued (submitted) descriptors to the active (issued) list. This was wrong as if there were any descriptors in the submitted list they were moved to the issued list without actually issuing them to the controller, thus a completion could be raised without even fireing the descriptor. Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller") Reported-by: Peter Rosin <peda@axentia.se> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/ Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-13-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-08dmaengine: at_hdmac: Fix descriptor handling when issuing it to hardwareTudor Ambarus1-4/+11
As it was before, the descriptor was issued to the hardware without adding it to the active (issued) list. This could result in a completion of other descriptor, or/and in the descriptor never being completed. Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller") Reported-by: Peter Rosin <peda@axentia.se> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/ Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-12-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-08dmaengine: at_hdmac: Fix concurrency over the active listTudor Ambarus1-4/+6
The tasklet (atc_advance_work()) did not held the channel lock when retrieving the first active descriptor, causing concurrency problems if issue_pending() was called in between. If issue_pending() was called exactly after the lock was released in the tasklet (atc_advance_work()), atc_chain_complete() could complete a descriptor for which the controller has not yet raised an interrupt. Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller") Reported-by: Peter Rosin <peda@axentia.se> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/ Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-11-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-08dmaengine: at_hdmac: Free the memset buf without holding the chan lockTudor Ambarus1-7/+7
There's no need to hold the channel lock when freeing the memset buf, as the operation has already completed. Free the memset buf without holding the channel lock. Fixes: 4d112426c344 ("dmaengine: hdmac: Add memset capabilities") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: stable@vger.kernel.org Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-10-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-08dmaengine: at_hdmac: Fix concurrency over descriptorTudor Ambarus1-5/+9
The descriptor was added to the free_list before calling the callback, which could result in reissuing of the same descriptor and calling of a single callback for both. Move the decriptor to the free list after the callback is invoked. Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller") Reported-by: Peter Rosin <peda@axentia.se> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/ Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-9-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-08dmaengine: at_hdmac: Fix concurrency problems by removing atc_complete_all()Tudor Ambarus1-45/+4
atc_complete_all() had concurrency bugs, thus remove it: 1/ atc_complete_all() in its entirety was buggy, as when the atchan->queue list (the one that contains descriptors that are not yet issued to the hardware) contained descriptors, it fired just the first from the atchan->queue, but moved all the desc from atchan->queue to atchan->active_list and considered them all as fired. This could result in calling the completion of a descriptor that was not yet issued to the hardware. 2/ when in tasklet at atc_advance_work() time, atchan->active_list was queried without holding the lock of the chan. This can result in atchan->active_list concurrency problems between the tasklet and issue_pending(). Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller") Reported-by: Peter Rosin <peda@axentia.se> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/ Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-8-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-08dmaengine: at_hdmac: Protect atchan->status with the channel lockTudor Ambarus1-2/+2
Now that the complete callback call was removed from device_terminate_all(), we can protect the atchan->status with the channel lock. The atomic bitops on atchan->status do not substitute proper locking on the status, as one could still modify the status after the lock was dropped in atc_terminate_all() but before the atomic bitops were executed. Fixes: 078a6506141a ("dmaengine: at_hdmac: Fix deadlocks") Reported-by: Peter Rosin <peda@axentia.se> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/ Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-7-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-08dmaengine: at_hdmac: Do not call the complete callback on device_terminate_allTudor Ambarus1-9/+2
The method was wrong because it violated the dmaengine API. For aborted transfers the complete callback should not be called. Fix the behavior and do not call the complete callback on device_terminate_all. Fixes: 808347f6a317 ("dmaengine: at_hdmac: add DMA slave transfers") Reported-by: Peter Rosin <peda@axentia.se> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/ Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-6-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-08dmaengine: at_hdmac: Fix premature completion of desc in issue_pendingTudor Ambarus1-3/+13
Multiple calls to atc_issue_pending() could result in a premature completion of a descriptor from the atchan->active list, as the method always completed the first active descriptor from the list. Instead, issue_pending() should just take the first transaction descriptor from the pending queue, move it to active_list and start the transfer. Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller") Reported-by: Peter Rosin <peda@axentia.se> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/ Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-5-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-08dmaengine: at_hdmac: Start transfer for cyclic channels in issue_pendingTudor Ambarus1-4/+0
Cyclic channels must too call issue_pending in order to start a transfer. Start the transfer in issue_pending regardless of the type of channel. This wrongly worked before, because in the past the transfer was started at tx_submit level when only a desc in the transfer list. Fixes: 53830cc75974 ("dmaengine: at_hdmac: add cyclic DMA operation support") Reported-by: Peter Rosin <peda@axentia.se> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/ Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-4-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-08dmaengine: at_hdmac: Don't start transactions at tx_submit levelTudor Ambarus1-11/+3
tx_submit is supposed to push the current transaction descriptor to a pending queue, waiting for issue_pending() to be called. issue_pending() must start the transfer, not tx_submit(), thus remove atc_dostart() from atc_tx_submit(). Clients of at_xdmac that assume that tx_submit() starts the transfer must be updated and call dma_async_issue_pending() if they miss to call it. The vdbg print was moved to after the lock is released. It is desirable to do the prints without the lock held if possible, and because the if statement disappears there's no reason why to do the print while holding the lock. Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller") Reported-by: Peter Rosin <peda@axentia.se> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/ Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-3-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-08dmaengine: at_hdmac: Fix at_lli struct definitionTudor Ambarus1-5/+5
Those hardware registers are all of 32 bits, while dma_addr_t ca be of type u64 or u32 depending on CONFIG_ARCH_DMA_ADDR_T_64BIT. Force u32 to comply with what the hardware expects. Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: stable@vger.kernel.org Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-2-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-08dmaengine: stm32-dma: fix potential race between pause and resumeAmelie Delaunay1-8/+6
When disabling dma channel, a TCF flag is set and as TCIE is enabled, an interrupt is raised. On a busy system, the interrupt may have latency and the user can ask for dmaengine_resume while stm32-dma driver has not yet managed the complete pause (backup of registers to restore state in resume). To avoid such a case, instead of waiting the interrupt to backup the registers, do it just after disabling the channel and discard Transfer Complete interrupt in case the channel is paused. Fixes: 099a9a94be0e ("dmaengine: stm32-dma: add device_pause/device_resume support") Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20221024083611.132588-1-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-08dmaengine: ti: k3-udma-glue: fix memory leak when register device failYang Yingliang1-0/+3
If device_register() fails, it should call put_device() to give up reference, the name allocated in dev_set_name() can be freed in callback function kobject_cleanup(). Fixes: 5b65781d06ea ("dmaengine: ti: k3-udma-glue: Add support for K3 PKTDMA") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20221020062827.2914148-1-yangyingliang@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-08dmaengine: mv_xor_v2: Fix a resource leak in mv_xor_v2_remove()Christophe JAILLET1-0/+1
A clk_prepare_enable() call in the probe is not balanced by a corresponding clk_disable_unprepare() in the remove function. Add the missing call. Fixes: 3cd2c313f1d6 ("dmaengine: mv_xor_v2: Fix clock resource by adding a register clock") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/e9e3837a680c9bd2438e4db2b83270c6c052d005.1666640987.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-08dmaengine: apple-admac: Fix grabbing of channels in of_xlateMartin Povišer1-1/+1
The of_xlate callback is supposed to return the channel after already having 'grabbed' it for private use, so fill that in. Fixes: b127315d9a78 ("dmaengine: apple-admac: Add Apple ADMAC driver") Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20221019132324.8585-1-povik+lin@cutebit.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-08dmaengine: idxd: fix RO device state error after been disabled/resetFengqian Gao1-6/+14
When IDXD is not configurable, that means its WQ, engine, and group configurations cannot be changed. But it can be disabled and its state should be set as disabled regardless it's configurable or not. Fix this by setting device state IDXD_DEV_DISABLED for read-only device as well in idxd_device_clear_state(). Fixes: cf4ac3fef338 ("dmaengine: idxd: fix lockdep warning on device driver removal") Signed-off-by: Fengqian Gao <fengqian.gao@intel.com> Reviewed-by: Xiaochen Shen <xiaochen.shen@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20220930032835.2290-1-fengqian.gao@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-08dmaengine: idxd: Fix max batch size for Intel IAAXiaochen Shen4-6/+38
>From Intel IAA spec [1], Intel IAA does not support batch processing. Two batch related default values for IAA are incorrect in current code: (1) The max batch size of device is set during device initialization, that indicates batch is supported. It should be always 0 on IAA. (2) The max batch size of work queue is set to WQ_DEFAULT_MAX_BATCH (32) as the default value regardless of Intel DSA or IAA device during work queue setup and cleanup. It should be always 0 on IAA. Fix the issues by setting the max batch size of device and max batch size of work queue to 0 on IAA device, that means batch is not supported. [1]: https://cdrdv2.intel.com/v1/dl/getContent/721858 Fixes: 23084545dbb0 ("dmaengine: idxd: set max_xfer and max_batch for RO device") Fixes: 92452a72ebdf ("dmaengine: idxd: set defaults for wq configs") Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators") Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20220930201528.18621-2-xiaochen.shen@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-08dmaengine: pxa_dma: use platform_get_irq_optionalDoug Brown1-2/+2
The first IRQ is required, but IRQs 1 through (nb_phy_chans - 1) are optional, because on some platforms (e.g. PXA168) there is a single IRQ shared between all channels. This change inhibits a flood of "IRQ index # not found" messages at startup. Tested on a PXA168-based device. Fixes: 7723f4c5ecdb ("driver core: platform: Add an error message to platform_get_irq*()") Signed-off-by: Doug Brown <doug@schmorgal.com> Link: https://lore.kernel.org/r/20220906000709.52705-1-doug@schmorgal.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-19dmaengine: idxd: Do not enable user type Work Queue without Shared Virtual ↵Fenghua Yu1-0/+18
Addressing When the idxd_user_drv driver is bound to a Work Queue (WQ) device without IOMMU or with IOMMU Passthrough without Shared Virtual Addressing (SVA), the application gains direct access to physical memory via the device by programming physical address to a submitted descriptor. This allows direct userspace read and write access to arbitrary physical memory. This is inconsistent with the security goals of a good kernel API. Unlike vfio_pci driver, the IDXD char device driver does not provide any ways to pin user pages and translate the address from user VA to IOVA or PA without IOMMU SVA. Therefore the application has no way to instruct the device to perform DMA function. This makes the char device not usable for normal application usage. Since user type WQ without SVA cannot be used for normal application usage and presents the security issue, bind idxd_user_drv driver and enable user type WQ only when SVA is enabled (i.e. user PASID is enabled). Fixes: 448c3de8ac83 ("dmaengine: idxd: create user driver for wq 'device'") Cc: stable@vger.kernel.org Suggested-by: Arjan Van De Ven <arjan.van.de.ven@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Link: https://lore.kernel.org/r/20221014222541.3912195-1-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-19dmaengine: stm32-mdma: memset stm32_mdma_chan_config struct before using itAmelie Delaunay1-0/+1
New bool m2m_hw has been added at the end of stm32_mdma_chan_config struct to support the STM32 DMA MDMA chaining. m2m_hw is set true in stm32_mdma_slave_config() if peripheral_size is set, but m2m_hw is never initialized false. To ensure this case, and any further new update of the structure, memset it to 0 before using it. Fixes: 696874322771 ("dmaengine: stm32-mdma: add support to be triggered by STM32 DMA") Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20221017131413.202567-1-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-11treewide: use get_random_bytes() when possibleJason A. Donenfeld1-1/+1
The prandom_bytes() function has been a deprecated inline wrapper around get_random_bytes() for several releases now, and compiles down to the exact same code. Replace the deprecated wrapper with a direct call to the real function. This was done as a basic find and replace. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> # powerpc Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-07Merge tag 'dmaengine-6.1-rc1' of ↵Linus Torvalds32-344/+1277
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "New Support: - MT6795 SoC dma controller (AngeloGioacchino Del Regno) - qcom-adm controller yaml binding (Christian Marangi) - Renesas r8a779g0 dma controller yaml binding (Geert Uytterhoeven) - Qualcomm SM6350 GPI dma controller (Luca Weiss) Updates: - STM32 DMA-MDMA chaining support (Amelie Delaunay) - make hsu driver use managed resources (Andy Shevchenko) - the usual round of idxd driver updates (Dave Jiang & Jerry Snitselaar) - apple dma driver iommu and pd properties and remove use of devres for irqs (Janne Grunau & Martin Povišer) - device_synchronize support for Xilinx zynqmp driver (Swati Agarwal)" * tag 'dmaengine-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (60 commits) dmaengine: ioat: remove unused declarations in dma.h dmaengine: ti: k3-udma: Respond TX done if DMA_PREP_INTERRUPT is not requested dmaengine: zynqmp_dma: Add device_synchronize support dt-bindings: dma: add additional pbus reset to qcom,adm dt-bindings: dma: rework qcom,adm Documentation to yaml schema dt-bindings: dma: apple,admac: Add iommus and power-domains properties dmaengine: dw-edma: Remove runtime PM support dmaengine: idxd: add configuration for concurrent batch descriptor processing dmaengine: idxd: add configuration for concurrent work descriptor processing dmaengine: idxd: add WQ operation cap restriction support dmanegine: idxd: reformat opcap output to match bitmap_parse() input dmaengine: idxd: convert ats_dis to a wq flag dmaengine: ioat: stop mod_timer from resurrecting deleted timer in __cleanup() dmaengine: qcom-adm: fix wrong calling convention for prep_slave_sg dmaengine: qcom-adm: fix wrong sizeof config in slave_config dmaengine: ti: k3-psil: add additional TX threads for j721e dmaengine: ti: k3-psil: add additional TX threads for j7200 dmaengine: apple-admac: Trigger shared reset dmaengine: apple-admac: Do not use devres for IRQs dmaengine: ti: edma: Remove some unused functions ...
2022-09-29dmaengine: ioat: remove unused declarations in dma.hGaosheng Cui1-2/+0
ioat_ring_alloc_order and ioat_ring_max_alloc_order have been removed since commit cd60cd96137f ("dmaengine: IOATDMA: Removing descriptor ring reshape"), so remove them. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20220911091817.3214271-1-cuigaosheng1@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: ti: k3-udma: Respond TX done if DMA_PREP_INTERRUPT is not requestedVaishnav Achath1-2/+10
If the DMA consumer driver does not expect the callback for TX done, then we need not perform the channel RT byte counter calculations and estimate the completion but return complete on first attempt itself.This assumes that the consumer who did not request DMA_PREP_INTERRUPT has its own mechanism for understanding TX completion, example: MCSPI EOW interrupt can be used as TX completion signal for a SPI transaction. Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20220914110049.5842-1-vaishnav.a@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: zynqmp_dma: Add device_synchronize supportSwati Agarwal1-0/+12
dmaengine_synchronize implementation is required to synchronize proper termination of current transfers so that any memory resources are not freed while still in use. Implement this callback in the driver so that framework can use the same (in dmaengine_terminate_sync/ dmaengine_synchronize). Signed-off-by: Swati Agarwal <swati.agarwal@amd.com> Link: https://lore.kernel.org/r/20220915090516.5812-1-swati.agarwal@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: dw-edma: Remove runtime PM supportManivannan Sadhasivam1-12/+0
Currently, the dw-edma driver enables the runtime_pm for parent device (chip->dev) and increments/decrements the refcount during alloc/free chan resources callbacks. This leads to a problem when the eDMA driver has been probed, but the channels were not used. This scenario can happen when the DW PCIe driver probes eDMA driver successfully, but the PCI EPF driver decides not to use eDMA channels and use iATU instead for PCI transfers. In this case, the underlying device would be runtime suspended due to pm_runtime_enable() in dw_edma_probe() and the PCI EPF driver would have no knowledge of it. Ideally, the eDMA driver should not be the one doing the runtime PM of the parent device. The responsibility should instead belong to the client drivers like PCI EPF. So let's remove the runtime PM support from eDMA driver. Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Frank Li <Frank.Li@nxp.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20220910054700.12205-1-manivannan.sadhasivam@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: idxd: add configuration for concurrent batch descriptor processingDave Jiang4-3/+40
Add sysfs knob to allow control of the number of batch descriptors that can be concurrently processed by an engine in the group as a fraction of the Maximum Work Descriptors in Progress value specfied in ENGCAP register. This control knob is part of toggle for QoS control. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20220917161222.2835172-6-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: idxd: add configuration for concurrent work descriptor processingDave Jiang4-15/+75
Add sysfs knob to allow control of the number of work descriptors that can be concurrently processed by an engine in the group as a fraction of the Maximum Work Descriptors in Progress value specified in ENGCAP register. This control knob is part of toggle for QoS control. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20220917161222.2835172-5-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: idxd: add WQ operation cap restriction supportDave Jiang5-3/+117
DSA 2.0 add the capability of configuring DMA ops on a per workqueue basis. This means that certain ops can be disabled by the system administrator for certain wq. By default, all ops are available. A bitmap is used to store the ops due to total op size of 256 bits and it is more convenient to use a range list to specify which bits are enabled. One of the usage to support this is for VM migration between different iteration of devices. The newer ops are disabled in order to allow guest to migrate to a host that only support older ops. Another usage is to restrict the WQ to certain operations for QoS of performance. A sysfs of ops_config attribute is added per wq. It is only usable when the ops_config bit is set under WQ_CAP register. This means that this attribute will return -EOPNOTSUPP on DSA 1.x devices. The expected input is a range list for the bits per operation the WQ supports. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20220917161222.2835172-4-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmanegine: idxd: reformat opcap output to match bitmap_parse() inputDave Jiang4-7/+26
To make input and output consistent and prepping for the per WQ operation configuration support, change the output of opcap display to match the input that is expected by bitmap_parse() helper function. The output will be a bitmap with field width as the number of bits using the %*pb format specifier for printk() family. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20220917161222.2835172-3-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: idxd: convert ats_dis to a wq flagDave Jiang3-5/+8
Make wq attributes access consistent. Convert ats_dis to wq flag WQ_FLAG_ATS_DISABLE. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20220917161222.2835172-2-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: ioat: stop mod_timer from resurrecting deleted timer in __cleanup()Dave Jiang1-3/+3
User reports observing timer event report channel halted but no error observed in CHANERR register. The driver finished self-test and released channel resources. Debug shows that __cleanup() can call mod_timer() after the timer has been deleted and thus resurrect the timer. While harmless, it causes suprious error message to be emitted. Use mod_timer_pending() call to prevent deleted timer from being resurrected. Fixes: 3372de5813e4 ("dmaengine: ioatdma: removal of dma_v3.c and relevant ioat3 references") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/166360672197.3851724.17040290563764838369.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: qcom-adm: fix wrong calling convention for prep_slave_sgChristian Marangi1-7/+13
The calling convention for pre_slave_sg is to return NULL on error and provide an error log to the system. Qcom-adm instead provide error pointer when an error occur. This indirectly cause kernel panic for example for the nandc driver that checks only if the pointer returned by device_prep_slave_sg is not NULL. Returning an error pointer makes nandc think the device_prep_slave_sg function correctly completed and makes the kernel panics later in the code. While nandc is the one that makes the kernel crash, it was pointed out that the real problem is qcom-adm not following calling convention for that function. To fix this, drop returning error pointer and return NULL with an error log. Fixes: 03de6b273805 ("dmaengine: qcom-adm: stop abusing slave_id config") Fixes: 5c9f8c2dbdbe ("dmaengine: qcom: Add ADM driver") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org # v5.11+ Link: https://lore.kernel.org/r/20220916041256.7104-1-ansuelsmth@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: qcom-adm: fix wrong sizeof config in slave_configChristian Marangi1-1/+1
Fix broken slave_config function that uncorrectly compare the peripheral_size with the size of the config pointer instead of the size of the config struct. This cause the crci value to be ignored and cause a kernel panic on any slave that use adm driver. To fix this, compare to the size of the struct and NOT the size of the pointer. Fixes: 03de6b273805 ("dmaengine: qcom-adm: stop abusing slave_id config") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org # v5.17+ Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220915204844.3838-1-ansuelsmth@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: ti: k3-psil: add additional TX threads for j721eMatt Ranostay1-0/+79
Add matching PSI-L threads mapping for transmission DMA channels on the J721E platform. Signed-off-by: Matt Ranostay <mranostay@ti.com> Link: https://lore.kernel.org/r/20220919205931.8397-2-mranostay@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: ti: k3-psil: add additional TX threads for j7200Matt Ranostay1-0/+67
Add matching PSI-L threads mapping for transmission DMA channels on the J7200 platform. Signed-off-by: Matt Ranostay <mranostay@ti.com> Link: https://lore.kernel.org/r/20220919205931.8397-3-mranostay@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: apple-admac: Trigger shared resetMartin Povišer1-3/+19
If a reset domain is attached to the device, obtain a shared reference to it and trigger it. Typically on a chip the ADMAC controller will share a reset domain with the MCA peripheral. Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220918095845.68860-5-povik+lin@cutebit.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: apple-admac: Do not use devres for IRQsMartin Povišer1-9/+18
This is in advance of adding support for triggering the reset signal to the peripheral, since registering the IRQ handler will have to be sequenced with it. Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220918095845.68860-4-povik+lin@cutebit.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: ti: edma: Remove some unused functionsJiapeng Chong1-40/+0
These functions are defined in the edma.c file, but not called elsewhere, so delete these unused functions. drivers/dma/ti/edma.c:746:31: warning: unused function 'to_edma_cc'. drivers/dma/ti/edma.c:420:20: warning: unused function 'edma_param_or'. drivers/dma/ti/edma.c:414:20: warning: unused function 'edma_param_and'. drivers/dma/ti/edma.c:402:20: warning: unused function 'edma_param_write'. drivers/dma/ti/edma.c:373:28: warning: unused function 'edma_shadow0_read'. drivers/dma/ti/edma.c:396:28: warning: unused function 'edma_param_read'. drivers/dma/ti/edma.c:355:20: warning: unused function 'edma_or_array'. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2152 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20220914101943.83929-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: sh: rcar-dmac: Replace zero-length arrays with ↵Gustavo A. R. Silva1-2/+2
DECLARE_FLEX_ARRAY() helper Zero-length arrays are deprecated and we are moving towards adopting C99 flexible-array members, instead. So, replace zero-length arrays declarations in anonymous union with the new DECLARE_FLEX_ARRAY() helper macro. This helper allows for flexible-array members in unions. Link: https://github.com/KSPP/linux/issues/193 Link: https://github.com/KSPP/linux/issues/217 Link: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/YzIdsJqsR3LH2qEK@work Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: idxd: Remove unused struct idxd_faultYuan Can1-6/+0
Since fault processing code has been removed, struct idxd_fault is not used any more and can be removed as well. Signed-off-by: Yuan Can <yuancan@huawei.com> Link: https://lore.kernel.org/r/20220928014747.106808-1-yuancan@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: idxd: track enabled workqueues in bitmapJerry Snitselaar5-2/+14
Now that idxd_wq_disable_cleanup() sets the workqueue state to IDXD_WQ_DISABLED, use a bitmap to track which workqueues have been enabled. This will then be used to determine which workqueues should be re-enabled when attempting a software reset to recover from a device halt state. Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Vinod Koul <vkoul@kernel.org> Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20220928154856.623545-3-jsnitsel@redhat.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: idxd: Set wq state to disabled in idxd_wq_disable_cleanup()Jerry Snitselaar1-1/+1
If we are calling idxd_wq_disable_cleanup(), the workqueue should be in a disabled state. So set the workqueue state to IDXD_WQ_DISABLED so that the state reflects that. Currently if there is a device failure, and a software reset is attempted the workqueues will not be re-enabled due to idxd_wq_enable() seeing that state as already being IDXD_WQ_ENABLED. Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Vinod Koul <vkoul@kernel.org> Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20220928154856.623545-2-jsnitsel@redhat.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: pl08x: Fix double wordShaomin Deng1-1/+1
Fix the double word "many" in comments. Signed-off-by: Shaomin Deng <dengshaomin@cdjrlc.com> Link: https://lore.kernel.org/r/20220830150708.24507-1-dengshaomin@cdjrlc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: virt-dma: Fix double word in commentsShaomin Deng1-1/+1
Delete the double word "many" in comments. Signed-off-by: Shaomin Deng <dengshaomin@cdjrlc.com> Link: https://lore.kernel.org/r/20220825144545.3528-1-dengshaomin@cdjrlc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: qcom: gpi: move read_lock_bh to read_lock in taskletTuo Cao1-3/+3
it is unnecessary to call read_lock_bh in a tasklet. Signed-off-by: Tuo Cao <91tuocao@gmail.com> Link: https://lore.kernel.org/r/20220814131323.7029-1-91tuocao@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 02:54:53 +0000