summaryrefslogtreecommitdiffstats
path: root/drivers/dma
AgeCommit message (Collapse)AuthorFilesLines
2020-02-25dmaengine: imx-sdma: Fix the event id check to include RX event for UART6Frieder Schrempf1-2/+2
On i.MX6UL/ULL and i.MX6SX the DMA event id for the RX channel of UART6 is '0'. To fix the broken DMA support for UART6, we change the check for event_id0 to include '0' as a valid id. Fixes: 1ec1e82f2510 ("dmaengine: Add Freescale i.MX SDMA support") Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200225082139.7646-1-frieder.schrempf@kontron.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25dmaengine: tegra-apb: Prevent race conditions of tasklet vs free listDmitry Osipenko1-1/+1
The interrupt handler puts a half-completed DMA descriptor on a free list and then schedules tasklet to process bottom half of the descriptor that executes client's callback, this creates possibility to pick up the busy descriptor from the free list. Thus, let's disallow descriptor's re-use until it is fully processed. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200209163356.6439-3-digetx@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25dmaengine: tegra-apb: Fix use-after-freeDmitry Osipenko1-4/+0
I was doing some experiments with I2C and noticed that Tegra APB DMA driver crashes sometime after I2C DMA transfer termination. The crash happens because tegra_dma_terminate_all() bails out immediately if pending list is empty, and thus, it doesn't release the half-completed descriptors which are getting re-used before ISR tasklet kicks-in. tegra-i2c 7000c400.i2c: DMA transfer timeout elants_i2c 0-0010: elants_i2c_irq: failed to read data: -110 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 142 at lib/list_debug.c:45 __list_del_entry_valid+0x45/0xac list_del corruption, ddbaac44->next is LIST_POISON1 (00000100) Modules linked in: CPU: 0 PID: 142 Comm: kworker/0:2 Not tainted 5.5.0-rc2-next-20191220-00175-gc3605715758d-dirty #538 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: events_freezable_power_ thermal_zone_device_check [<c010e5c5>] (unwind_backtrace) from [<c010a1c5>] (show_stack+0x11/0x14) [<c010a1c5>] (show_stack) from [<c0973925>] (dump_stack+0x85/0x94) [<c0973925>] (dump_stack) from [<c011f529>] (__warn+0xc1/0xc4) [<c011f529>] (__warn) from [<c011f7e9>] (warn_slowpath_fmt+0x61/0x78) [<c011f7e9>] (warn_slowpath_fmt) from [<c042497d>] (__list_del_entry_valid+0x45/0xac) [<c042497d>] (__list_del_entry_valid) from [<c047a87f>] (tegra_dma_tasklet+0x5b/0x154) [<c047a87f>] (tegra_dma_tasklet) from [<c0124799>] (tasklet_action_common.constprop.0+0x41/0x7c) [<c0124799>] (tasklet_action_common.constprop.0) from [<c01022ab>] (__do_softirq+0xd3/0x2a8) [<c01022ab>] (__do_softirq) from [<c0124683>] (irq_exit+0x7b/0x98) [<c0124683>] (irq_exit) from [<c0168c19>] (__handle_domain_irq+0x45/0x80) [<c0168c19>] (__handle_domain_irq) from [<c043e429>] (gic_handle_irq+0x45/0x7c) [<c043e429>] (gic_handle_irq) from [<c0101aa5>] (__irq_svc+0x65/0x94) Exception stack(0xde2ebb90 to 0xde2ebbd8) Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200209163356.6439-2-digetx@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-24dmaengine: imx-sdma: fix context cacheMartin Fuzzey1-0/+1
There is a DMA problem with the serial ports on i.MX6. When the following sequence is performed: 1) Open a port 2) Write some data 3) Close the port 4) Open a *different* port 5) Write some data 6) Close the port The second write sends nothing and the second close hangs. If the first close() is omitted it works. Adding logs to the the UART driver shows that the DMA is being setup but the callback is never invoked for the second write. This used to work in 4.19. Git bisect leads to: ad0d92d: "dmaengine: imx-sdma: refine to load context only once" This commit adds a "context_loaded" flag used to avoid unnecessary context setups. However the flag is only reset in sdma_channel_terminate_work(), which is only invoked in a worker triggered by sdma_terminate_all() IF there is an active descriptor. So, if no active descriptor remains when the channel is terminated, the flag is not reset and, when the channel is later reused the old context is used. Fix the problem by always resetting the flag in sdma_free_chan_resources(). Cc: stable@vger.kernel.org Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Fixes: ad0d92d7ba6a ("dmaengine: imx-sdma: refine to load context only once") Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/1580305274-27274-1-git-send-email-martin.fuzzey@flowbird.group Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-24dmaengine: idxd: wq size configuration needs to check global max sizeDave Jiang1-1/+15
The current size_store() function for idxd sysfs does not check the total wq size. This allows configuration of all wqs with total wq size. Add check to make sure the wq sysfs attribute rejects storing of size over the total wq size. Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver") Reported-by: Jerry Chen <jerry.t.chen@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/158213309629.2509.3583411832507185041.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-24dmaengine: idxd: sysfs input of wq incorrect wq type should return errorDave Jiang1-2/+4
Currently when inputing an unrecognized wq type, we set the wq type to "none". It really should return error and not change the existing wq type that's in the kernel. Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver") Reported-by: Yixin Zhang <yixin.zhang@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/158213304803.2290.13336343633425868211.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-24dmaengine: coh901318: Fix a double lock bug in dma_tc_handle()Dan Carpenter1-4/+0
The caller is already holding the lock so this will deadlock. Fixes: 0b58828c923e ("DMAENGINE: COH 901 318 remove irq counting") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200217144050.3i4ymbytogod4ijn@kili.mountain Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-19dmaengine: idxd: correct reserved token calculationDave Jiang1-1/+1
The calcuation for limit of reserved token did not take into account the change the user wanted vs the current group reserved token. This causes changing of the reserved token to be possible only after we set the value of the reserved token back to 0. Fix calculation so we can set a value that is non zero for reserved token. Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver") Reported-by: Jerry Chen <jerry.t.chen@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/158204471889.37789.7749177228265869168.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-19dmaengine: ti: k3-udma: Fix terminated transfer handlingPeter Ujfalusi1-14/+15
When we receive back the descriptor of the terminated transfer the cookie must be marked as completed to make sure that the accounting is correct. In udma_tx_status() the status should be marked as completed if the channel is no longer running (it can only happen if the channel is not yet started for the first time, or after a channel termination). Fixes: 25dcb5dd7b7ce ("dmaengine: ti: New driver for K3 UDMA") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200214091441.27535-7-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-19dmaengine: ti: k3-udma: Use the channel direction in pause/resume functionsPeter Ujfalusi1-9/+3
It should be possible to pause, resume and check the pause state of a channel even if we do not have active transfer. udma_is_chan_paused() can trigger NULL pointer reference in it's current form when the status is checked while uc->desc is NULL. Fixes: 25dcb5dd7b7ce ("dmaengine: ti: New driver for K3 UDMA") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200214091441.27535-6-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-19dmaengine: ti: k3-udma: Use the TR counter helper for slave_sg and cyclicPeter Ujfalusi1-42/+88
Use the generic TR setup function to get the TR counters for both cyclic and slave_sg transfers. This way the period_size for cyclic and sg_dma_len() for slave_sg can be as large as (SZ_64K - 1) * (SZ_64K - 1) and we can handle cases when the length is >SZ_64K and a prime number. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200214091441.27535-5-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-19dmaengine: ti: k3-udma: Move the TR counter calculation to helper functionPeter Ujfalusi1-23/+51
Move the TR counter parameter configuration code out from the prep_memcpy callback to a helper function to allow a generic re-usable code for other TR based transfers. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200214091441.27535-4-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-19dmaengine: ti: k3-udma: Workaround for RX teardown with stale data in peerPeter Ujfalusi1-17/+151
When a channel is asked to be stopped (teardown) and we do not have active descriptor to receive stale data buffered on the remote side then the teardown will not complete as UDMA needs a descriptor to be able to flush out the DMA pipe. The peer is trying to push the data to UDMA in teardown, but UDMA is pushing back because it has no descriptor which would allow it to drain the data. The workaround is to create 1K 'trashcan' to receive the discarded data and set up descriptors for packet and TR mode channels. When a channel is stopped and there is no active descriptor then a descriptor is pushed to the ring for UDMA before the teardown is initiated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200214091441.27535-3-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-19dmaengine: ti: k3-udma: Use ktime/usleep_range based TX completion checkVignesh Raghavendra1-27/+53
In some cases (McSPI for example) the jiffie and delayed_work based workaround can cause big throughput drop. Switch to use ktime/usleep_range based implementation to be able to sustain speed for PDMA based peripherals. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200214091441.27535-2-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-13dmaengine: idxd: Fix error handling in idxd_wq_cdev_dev_setup()Dan Carpenter1-2/+2
We can't call kfree(dev) after calling device_register(dev). The "dev" pointer has to be freed using put_device(). Fixes: 42d279f9137a ("dmaengine: idxd: add char driver to expose submission portal to userland") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20200205123248.hmtog7qa2eiqaagh@kili.mountain Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-13dmaengine: idxd: fix runaway module ref count on device driver bindDave Jiang1-0/+3
idxd_config_bus_probe() calls try_module_get() but never calls module_put() when it fails. Thus with every failed attempt, the ref count goes up. Add module_put() in failure paths. Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver") Reported-by: Jerry Chen <jerry.t.chen@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/158144296730.41381.12134210685456322434.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-08Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-18/+270
Pull ARM Device-tree updates from Olof Johansson: "New SoCs: - Atmel/Microchip SAM9X60 (ARM926 SoC) - OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all variants of it with different GPU/media IP configurations. - ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU) - ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of db8500) - Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem) - Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class) New boards: - Allwinner: + Emlid Neutis SoM (H3 variant) + Libre Computer ALL-H3-IT + PineH64 Model B - Amlogic: + Libretech Amlogic GX PC (s905d and s912-based variants) - Atmel/Microchip: + Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1) - Marvell: + Armada 385-based SolidRun Clearfog GTR - NXP: + Gateworks GW59xx boards based on i.MX6/6Q/6QDL + Tolino Shine 3 eBook reader (i.MX6sl) + Embedded Artists COM (i.MX7ULP) + SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems) + Google Coral Edge TPU (i.MX8MQ) - Rockchip: + Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs) + Radxa Rock Pi N10 (RK3399Pro-based) + VMARC RK3399Pro SOM - ST: + Reference boards for stm32mp15 - ST Ericsson: + Samsung Galaxy S III mini (GT-I8190) + HREF520 reference board for DB8520 - TI OMAP: + Gen1 Amazon Echo (OMAP3630-based) - Qualcomm: + Inforce 6640 Single Board Computer (msm8996-based) + SC7180 IDP (SC7180-based)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (623 commits) dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera arm64: dts: ti: k3-am65-main Add CAL node arm64: dts: ti: k3-j721e-main: Add McASP nodes arm64: dts: ti: k3-am654-main: Add McASP nodes arm64: dts: ti: k3-j721e: DMA support arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS arm64: dts: ti: k3-am65: DMA support arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss arm64: dts: ti: k3-am65-main: Correct main NAVSS representation ARM: dts: aspeed: rainier: Add UCD90320 power sequencer ARM: dts: aspeed: rainier: Switch PSUs to unknown version arm64: dts: rockchip: Kill off "simple-panel" compatibles ARM: dts: rockchip: Kill off "simple-panel" compatibles arm64: dts: rockchip: rename dwmmc node names to mmc ARM: dts: rockchip: rename dwmmc node names to mmc arm64: dts: exynos: Rename Samsung and Exynos to lowercase arm64: dts: uniphier: add reset-names to NAND controller node ...
2020-02-05Merge tag 'dmaengine-fix-5.6-rc1' of ↵Linus Torvalds2-10/+13
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "Fixes for: - Documentation build error fix - Fix dma_request_chan() error return - Remove unneeded conversion in idxd driver - Fix pointer check for dma_async_device_channel_register() - Fix slave-channel symlink cleanup" * tag 'dmaengine-fix-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: Cleanups for the slave <-> channel symlink support dmaengine: fix null ptr check for __dma_async_device_channel_register() dmaengine: idxd: fix boolconv.cocci warnings dmaengine: Fix return value for dma_request_chan() in case of failure dmaengine: doc: Properly indent metadata title
2020-02-04treewide: remove redundant IS_ERR() before error code checkMasahiro Yamada1-1/+1
'PTR_ERR(p) == -E*' is a stronger condition than IS_ERR(p). Hence, IS_ERR(p) is unneeded. The semantic patch that generates this commit is as follows: // <smpl> @@ expression ptr; constant error_code; @@ -IS_ERR(ptr) && (PTR_ERR(ptr) == - error_code) +PTR_ERR(ptr) == - error_code // </smpl> Link: http://lkml.kernel.org/r/20200106045833.1725-1-masahiroy@kernel.org Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Stephen Boyd <sboyd@kernel.org> [drivers/clk/clk.c] Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> [GPIO] Acked-by: Wolfram Sang <wsa@the-dreams.de> [drivers/i2c] Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [acpi/scan.c] Acked-by: Rob Herring <robh@kernel.org> Cc: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-03dmaengine: Cleanups for the slave <-> channel symlink supportPeter Ujfalusi1-9/+9
No need to use goto to jump over the return chan ? chan : ERR_PTR(-EPROBE_DEFER); We can just revert the check and return right there. Do not fail the channel request if the chan->name allocation fails, but print a warning about it. Change the dev_err to dev_warn if sysfs_create_link() fails as it is not fatal. Only attempt to remove the DMA_SLAVE_NAME symlink if it is created - or it was attempted to be created. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200131093859.3311-2-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-03dmaengine: fix null ptr check for __dma_async_device_channel_register()Dave Jiang1-0/+3
Add check to pointer after assignment before accessing members. Fixes: d2fb0a043838: ("dmaengine: break out channel registration") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/158049351973.45445.3291586905226032744.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-03dmaengine: idxd: fix boolconv.cocci warningskbuild test robot1-1/+1
Remove unneeded conversion to bool Generated by: scripts/coccinelle/misc/boolconv.cocci CC: Dave Jiang <dave.jiang@intel.com> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Julia Lawall <julia.lawall@inria.fr> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2001301543150.7476@hadrien Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-30dmaengine: Fix return value for dma_request_chan() in case of failureMarek Szyprowski1-1/+1
Commit 71723a96b8b1 ("dmaengine: Create symlinks between DMA channels and slaves") changed the dma_request_chan() function flow in such a way that it always returns EPROBE_DEFER in case of channels that cannot be found. This break the operation of the devices which have optional DMA channels as it puts their drivers in endless deferred probe loop. Fix this by propagating the proper error value. Fixes: 71723a96b8b1 ("dmaengine: Create symlinks between DMA channels and slaves") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200130070834.17537-1-m.szyprowski@samsung.com [vkoul: fix typo in patch title] Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-27Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremapLinus Torvalds1-2/+2
Pull ioremap updates from Christoph Hellwig: "Remove the ioremap_nocache API (plus wrappers) that are always identical to ioremap" * tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap: remove ioremap_nocache and devm_ioremap_nocache MIPS: define ioremap_nocache to ioremap
2020-01-27Merge tag 'dmaengine-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds47-354/+11643
Pull dmaengine updates from Vinod Koul: "This time we have a bunch of core changes to support dynamic channels, hotplug of controllers, new apis for metadata ops etc along with new drivers for Intel data accelerators, TI K3 UDMA, PLX DMA engine and hisilicon Kunpeng DMA engine. Also usual assorted updates to drivers. Core: - Support for dynamic channels - Removal of various slave wrappers - Make few slave request APIs as private to dmaengine - Symlinks between channels and slaves - Support for hotplug of controllers - Support for metadata_ops for dma_async_tx_descriptor - Reporting DMA cached data amount - Virtual dma channel locking updates New drivers/device/feature support support: - Driver for Intel data accelerators - Driver for TI K3 UDMA - Driver for PLX DMA engine - Driver for hisilicon Kunpeng DMA engine - Support for eDMA support for QorIQ LS1028A in fsl edma driver - Support for cyclic dma in sun4i driver - Support for X1830 in JZ4780 driver" * tag 'dmaengine-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (62 commits) dmaengine: Create symlinks between DMA channels and slaves dmaengine: hisilicon: Add Kunpeng DMA engine support dmaengine: idxd: add char driver to expose submission portal to userland dmaengine: idxd: connect idxd to dmaengine subsystem dmaengine: idxd: add descriptor manipulation routines dmaengine: idxd: add sysfs ABI for idxd driver dmaengine: idxd: add configuration component of driver dmaengine: idxd: Init and probe for Intel data accelerators dmaengine: add support to dynamic register/unregister of channels dmaengine: break out channel registration x86/asm: add iosubmit_cmds512() based on MOVDIR64B CPU instruction dmaengine: ti: k3-udma: fix spelling mistake "limted" -> "limited" dmaengine: s3c24xx-dma: fix spelling mistake "to" -> "too" dmaengine: Move dma_get_{,any_}slave_channel() to private dmaengine.h dmaengine: Remove dma_request_slave_channel_compat() wrapper dmaengine: Remove dma_device_satisfies_mask() wrapper dt-bindings: fsl-imx-sdma: Add i.MX8MM/i.MX8MN/i.MX8MP compatible string dmaengine: zynqmp_dma: fix burst length configuration dmaengine: sun4i: Add support for cyclic requests with dedicated DMA dmaengine: fsl-qdma: fix duplicated argument to && ...
2020-01-24dmaengine: Create symlinks between DMA channels and slavesGeert Uytterhoeven1-6/+31
Currently it is not easy to find out which DMA channels are in use, and which slave devices are using which channels. Fix this by creating two symlinks between the DMA channel and the actual slave device when a channel is requested: 1. A "slave" symlink from DMA channel to slave device, 2. A "dma:<name>" symlink slave device to DMA channel. When the channel is released, the symlinks are removed again. The latter requires keeping track of the slave device and the channel name in the dma_chan structure. Note that this is limited to channel request functions for requesting an exclusive slave channel that take a device pointer (dma_request_chan() and dma_request_slave_channel*()). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Link: https://lore.kernel.org/r/20200117153056.31363-1-geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-24dmaengine: hisilicon: Add Kunpeng DMA engine supportZhou Wang3-0/+620
This patch adds a driver for HiSilicon Kunpeng DMA engine. This DMA engine which is an PCIe iEP offers 30 channels, each channel has a send queue, a complete queue and an interrupt to help to do tasks. This DMA engine can do memory copy between memory blocks or between memory and device buffer. Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Zhenfa Qiu <qiuzhenfa@hisilicon.com> Link: https://lore.kernel.org/r/1579155057-80523-1-git-send-email-wangzhou1@hisilicon.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-24dmaengine: idxd: add char driver to expose submission portal to userlandDave Jiang8-5/+422
Create a char device region that will allow acquisition of user portals in order to allow applications to submit DMA operations. A char device will be created per work queue that gets exposed. The workqueue type "user" is used to mark a work queue for user char device. For example if the workqueue 0 of DSA device 0 is marked for char device, then a device node of /dev/dsa/wq0.0 will be created. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/157965026985.73301.976523230037106742.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-24dmaengine: idxd: connect idxd to dmaengine subsystemDave Jiang8-2/+391
Add plumbing for dmaengine subsystem connection. The driver register a DMA device per DSA device. The channels are dynamically registered when a workqueue is configured to be "kernel:dmanegine" type. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/157965026376.73301.13867988830650740445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-24dmaengine: idxd: add descriptor manipulation routinesDave Jiang3-1/+102
This commit adds helper functions for DSA descriptor allocation, submission, and free operations. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/157965025757.73301.12692876585357550065.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-24dmaengine: idxd: add configuration component of driverDave Jiang6-3/+1536
The device is left unconfigured when the driver is loaded. Various components are configured via the driver sysfs attributes. Once configuration is done, the device can be enabled by writing the device name to the bind attribute of the device driver sysfs. Disabling can be done similarly. Also the individual work queues can also be enabled and disabled through the bind/unbind attributes. A constructed hierarchy is created through the struct device framework in order to provide appropriate configuration points and device state and status. This hierarchy is presented off the virtual DSA bus. i.e. /sys/bus/dsa/... Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/157965024585.73301.6431413676230150589.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-24dmaengine: idxd: Init and probe for Intel data acceleratorsDave Jiang8-0/+1857
The idxd driver introduces the Intel Data Stream Accelerator [1] that will be available on future Intel Xeon CPUs. One of the kernel access point for the driver is through the dmaengine subsystem. It will initially provide the DMA copy service to the kernel. Some of the main functionality introduced with this accelerator are: shared virtual memory (SVM) support, and descriptor submission using Intel CPU instructions movdir64b and enqcmds. There will be additional accelerator devices that share the same driver with variations to capabilities. This commit introduces the probe and initialization component of the driver. [1]: https://software.intel.com/en-us/download/intel-data-streaming-accelerator-preliminary-architecture-specification Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/157965023991.73301.6186843973135311580.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-24dmaengine: add support to dynamic register/unregister of channelsDave Jiang1-8/+26
With the channel registration routines broken out, now add support code to allow independent registering and unregistering of channels in a hotplug fashion. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/157965023364.73301.7821862091077299040.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-24dmaengine: break out channel registrationDave Jiang1-54/+81
In preparation for dynamic channel registration, the code segment that does the channel registration is broken out to its own function. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/157965022778.73301.8929944324898985438.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-23dmaengine: ti: k3-udma: fix spelling mistake "limted" -> "limited"Colin Ian King1-2/+2
There are spelling mistakes in dev_err messages. Fix them. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200122093818.2800743-1-colin.king@canonical.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-23dmaengine: s3c24xx-dma: fix spelling mistake "to" -> "too"Colin Ian King1-1/+1
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200122235237.2830344-1-colin.king@canonical.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21dmaengine: Move dma_get_{,any_}slave_channel() to private dmaengine.hGeert Uytterhoeven2-0/+5
The functions dma_get_slave_channel() and dma_get_any_slave_channel() are called from DMA engine drivers only. Hence move their declarations from the public header file <linux/dmaengine.h> to the private header file drivers/dma/dmaengine.h. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200121093311.28639-4-geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21dmaengine: Remove dma_device_satisfies_mask() wrapperGeert Uytterhoeven1-6/+3
Commit aa1e6f1a385eb2b0 ("dmaengine: kill struct dma_client and supporting infrastructure") removed the last user of the dma_device_satisfies_mask() wrapper. Remove the wrapper, and rename __dma_device_satisfies_mask() to dma_device_satisfies_mask(), to get rid of one more function starting with a double underscore. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200121093311.28639-2-geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21dmaengine: zynqmp_dma: fix burst length configurationMatthias Fend1-9/+15
Since the dma engine expects the burst length register content as power of 2 value, the burst length needs to be converted first. Additionally add a burst length range check to avoid corrupting unrelated register bits. Signed-off-by: Matthias Fend <matthias.fend@wolfvision.net> Link: https://lore.kernel.org/r/20200115102249.24398-1-matthias.fend@wolfvision.net Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21dmaengine: sun4i: Add support for cyclic requests with dedicated DMAStefan Mavrodiev1-21/+24
Currently the cyclic transfers can be used only with normal DMAs. They can be used by pcm_dmaengine module, which is required for implementing sound with sun4i-hdmi encoder. This is so because the controller can accept audio only from a dedicated DMA. This patch enables them, following the existing style for the scatter/gather type transfers. Signed-off-by: Stefan Mavrodiev <stefan@olimex.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20200110141140.28527-2-stefan@olimex.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21dmaengine: fsl-qdma: fix duplicated argument to &&Chen Zhou1-1/+1
There is duplicated argument to && in function fsl_qdma_free_chan_resources, which looks like a typo, pointer fsl_queue->desc_pool also needs NULL check, fix it. Detected with coccinelle. Fixes: b092529e0aa0 ("dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs") Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Reviewed-by: Peng Ma <peng.ma@nxp.com> Tested-by: Peng Ma <peng.ma@nxp.com> Link: https://lore.kernel.org/r/20200120125843.34398-1-chenzhou10@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21dmaengine: ti: k3-psil: make symbols staticPeter Ujfalusi4-7/+8
Fixe the following warnings by making these static drivers/dma/ti/k3-psil-j721e.c:62:16: warning: symbol 'j721e_src_ep_map' was not declared. Should it be static? drivers/dma/ti/k3-psil-j721e.c:172:16: warning: symbol 'j721e_dst_ep_map' was not declared. Should it be static? drivers/dma/ti/k3-psil-j721e.c:216:20: warning: symbol 'j721e_ep_map' was not declared. Should it be static? CC drivers/dma/ti/k3-psil-j721e.o drivers/dma/ti/k3-psil-am654.c:52:16: warning: symbol 'am654_src_ep_map' was not declared. Should it be static? drivers/dma/ti/k3-psil-am654.c:127:16: warning: symbol 'am654_dst_ep_map' was not declared. Should it be static? drivers/dma/ti/k3-psil-am654.c:169:20: warning: symbol 'am654_ep_map' was not declared. Should it be static? Reported-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200121070104.4393-1-peter.ujfalusi@ti.com [vkoul: updated patch title] Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21dmaengine: ti: k3-udma: Add glue layer for non DMAengine usersGrygorii Strashko6-1/+1433
Certain users can not use right now the DMAengine API due to missing features in the core. Prime example is Networking. These users can use the glue layer interface to avoid misuse of DMAengine API and when the core gains the needed features they can be converted to use generic API. The most prominent features the glue layer clients are depending on: - most PSI-L native peripheral use extra rflow ranges on a receive channel and depending on the peripheral's configuration packets from a single free descriptor ring is going to be received to different receive ring - it is also possible to have different free descriptor rings per rflow and an rflow can also support 4 additional free descriptor ring based on the size of the incoming packet - out of order completion of descriptors on a channel - when we have several queues to handle different priority packets the descriptors will be completed 'out-of-order' - the notion of prep_slave_sg is not matching with what the streaming type of operation is demanding for networking - Streaming type of operation - Ability to fill the free descriptor ring with descriptors in anticipation of incoming traffic and when a packet arrives UDMAP will form a packet and gives it to the client driver - the descriptors are not backed with exact size data buffers as we don't know the size of the packet we will receive, but as a generic pool of buffers to be used by the receive channel - NAPI type of operation (polling instead of interrupt driven transfer) - without this we can not sustain gigabit speeds and we need to support NAPI - not to limit this to networking, but other high performance operations Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20191223110458.30766-12-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21dmaengine: ti: New driver for K3 UDMAPeter Ujfalusi4-0/+3505
Split patch for review containing: defines, structs, io and low level functions and interrupt callbacks. DMA driver for Texas Instruments K3 NAVSS Unified DMA – Peripheral Root Complex (UDMA-P) The UDMA-P is intended to perform similar (but significantly upgraded) functions as the packet-oriented DMA used on previous SoC devices. The UDMA-P module supports the transmission and reception of various packet types. The UDMA-P is architected to facilitate the segmentation and reassembly of SoC DMA data structure compliant packets to/from smaller data blocks that are natively compatible with the specific requirements of each connected peripheral. Multiple Tx and Rx channels are provided within the DMA which allow multiple segmentation or reassembly operations to be ongoing. The DMA controller maintains state information for each of the channels which allows packet segmentation and reassembly operations to be time division multiplexed between channels in order to share the underlying DMA hardware. An external DMA scheduler is used to control the ordering and rate at which this multiplexing occurs for Transmit operations. The ordering and rate of Receive operations is indirectly controlled by the order in which blocks are pushed into the DMA on the Rx PSI-L interface. The UDMA-P also supports acting as both a UTC and UDMA-C for its internal channels. Channels in the UDMA-P can be configured to be either Packet-Based or Third-Party channels on a channel by channel basis. The initial driver supports: - MEM_TO_MEM (TR mode) - DEV_TO_MEM (Packet / TR mode) - MEM_TO_DEV (Packet / TR mode) - Cyclic (Packet / TR mode) - Metadata for descriptors Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20191223110458.30766-11-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21dmaengine: ti: k3 PSI-L remote endpoint configurationPeter Ujfalusi6-0/+533
In K3 architecture the DMA operates within threads. One end of the thread is UDMAP, the other is on the peripheral side. The UDMAP channel configuration depends on the needs of the remote endpoint and it can be differ from peripheral to peripheral. This patch adds database for am654 and j721e and small API to fetch the PSI-L endpoint configuration from the database which should only used by the DMA driver(s). Another API is added for native peripherals to give possibility to pass new configuration for the threads they are using, which is needed to be able to handle changes caused by different firmware loaded for the peripheral for example. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20191223110458.30766-9-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21dmaengine: Add support for reporting DMA cached data amountPeter Ujfalusi1-0/+8
A DMA hardware can have big cache or FIFO and the amount of data sitting in the DMA fabric can be an interest for the clients. For example in audio we want to know the delay in the data flow and in case the DMA have significantly large FIFO/cache, it can affect the latenc/delay Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20191223110458.30766-6-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21dmaengine: Add metadata_ops for dma_async_tx_descriptorPeter Ujfalusi1-0/+73
The metadata is best described as side band data or parameters traveling alongside the data DMAd by the DMA engine. It is data which is understood by the peripheral and the peripheral driver only, the DMA engine see it only as data block and it is not interpreting it in any way. The metadata can be different per descriptor as it is a parameter for the data being transferred. If the DMA supports per descriptor metadata it can implement the attach, get_ptr/set_len callbacks. Client drivers must only use either attach or get_ptr/set_len to avoid misconfiguration. Client driver can check if a given metadata mode is supported by the channel during probe time with dmaengine_is_metadata_mode_supported(chan, DESC_METADATA_CLIENT); dmaengine_is_metadata_mode_supported(chan, DESC_METADATA_ENGINE); and based on this information can use either mode. Wrappers are also added for the metadata_ops. To be used in DESC_METADATA_CLIENT mode: dmaengine_desc_attach_metadata() To be used in DESC_METADATA_ENGINE mode: dmaengine_desc_get_metadata_ptr() dmaengine_desc_set_metadata_len() Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20191223110458.30766-5-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-15dmaengine: plx-dma: Implement descriptor submissionLogan Gunthorpe1-0/+119
On prep, a spin lock is taken and the next entry in the circular buffer is filled. On submit, the valid bit is set in the hardware descriptor and the lock is released. The DMA engine is started (if it's not already running) when the client calls dma_async_issue_pending(). Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/20200103212021.2881-4-logang@deltatee.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-15dmaengine: plx-dma: Implement hardware initialization and cleanupLogan Gunthorpe1-0/+370
Allocate DMA coherent memory for the ring of DMA descriptors and program the appropriate hardware registers. A tasklet is created which is triggered on an interrupt to process all the finished requests. Additionally, any remaining descriptors are aborted when the hardware is removed or the resources freed. Use an RCU pointer to synchronize PCI device unbind. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/20200103212021.2881-3-logang@deltatee.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-15dmaengine: plx-dma: Introduce PLX DMA engine PCI driver skeletonLogan Gunthorpe3-0/+160
Some PLX Switches can expose DMA engines via extra PCI functions on the upstream port. Each function will have one DMA channel. This patch is just the core PCI driver skeleton and dma engine registration. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/20200103212021.2881-2-logang@deltatee.com Signed-off-by: Vinod Koul <vkoul@kernel.org>