summaryrefslogtreecommitdiffstats
path: root/drivers/dma
AgeCommit message (Collapse)AuthorFilesLines
2012-01-09Merge tag 'clk' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-4/+4
clock management changes for i.MX Another simple series related to clock management, this time only for imx. * tag 'clk' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: mxs: select HAVE_CLK_PREPARE for clock clk: add config option HAVE_CLK_PREPARE into Kconfig ASoC: mxs-saif: convert to clk_prepare/clk_unprepare video: mxsfb: convert to clk_prepare/clk_unprepare serial: mxs-auart: convert to clk_prepare/clk_unprepare net: flexcan: convert to clk_prepare/clk_unprepare mtd: gpmi-lib: convert to clk_prepare/clk_unprepare mmc: mxs-mmc: convert to clk_prepare/clk_unprepare dma: mxs-dma: convert to clk_prepare/clk_unprepare net: fec: add clk_prepare/clk_unprepare ARM: mxs: convert platform code to clk_prepare/clk_unprepare clk: add helper functions clk_prepare_enable and clk_disable_unprepare Fix up trivial conflicts in drivers/net/ethernet/freescale/fec.c due to commit 0ebafefcaa7a ("net: fec: add clk_prepare/clk_unprepare") clashing trivially with commit e163cc97f9ac ("net/fec: fix the .remove code").
2012-01-09Merge tag 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-5/+6
New feature development This adds support for new features, and contains stuff from most platforms. A number of these patches could have fit into other branches, too, but were small enough not to cause too much confusion here. * tag 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) mfd/db8500-prcmu: remove support for early silicon revisions ARM: ux500: fix the smp_twd clock calculation ARM: ux500: remove support for early silicon revisions ARM: ux500: update register files ARM: ux500: register DB5500 PMU dynamically ARM: ux500: update ASIC detection for U5500 ARM: ux500: support DB8520 ARM: picoxcell: implement watchdog restart ARM: OMAP3+: hwmod data: Add the default clockactivity for I2C ARM: OMAP3: hwmod data: disable multiblock reads on MMC1/2 on OMAP34xx/35xx <= ES2.1 ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP4 ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP3 ARM: OMAP: hwmod data: Add support for AM35xx UART4/ttyO3 ARM: Orion: Remove address map info from all platform data structures ARM: Orion: Get address map from plat-orion instead of via platform_data ARM: Orion: mbus_dram_info consolidation ARM: Orion: Consolidate the address map setup ARM: Kirkwood: Add configuration for MPP12 as GPIO ARM: Kirkwood: Recognize A1 revision of 6282 chip ARM: ux500: update the MOP500 GPIO assignments ...
2012-01-09Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-46/+53
Device tree conversions for samsung and tegra Both platforms had some initial device tree support, but this adds much more to actually make it usable. * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits) ARM: dts: Add intial dts file for EXYNOS4210 SoC, SMDKV310 and ORIGEN ARM: EXYNOS: Add Exynos4 device tree enabled board file rtc: rtc-s3c: Add device tree support input: samsung-keypad: Add device tree support ARM: S5PV210: Modify platform data for pl330 driver ARM: S5PC100: Modify platform data for pl330 driver ARM: S5P64x0: Modify platform data for pl330 driver ARM: EXYNOS: Add a alias for pdma clocks ARM: EXYNOS: Limit usage of pl330 device instance to non-dt build ARM: SAMSUNG: Add device tree support for pl330 dma engine wrappers DMA: PL330: Add device tree support ARM: EXYNOS: Modify platform data for pl330 driver DMA: PL330: Infer transfer direction from transfer request instead of platform data DMA: PL330: move filter function into driver serial: samsung: Fix build for non-Exynos4210 devices serial: samsung: add device tree support serial: samsung: merge probe() function from all SoC specific extensions serial: samsung: merge all SoC specific port reset functions ARM: SAMSUNG: register uart clocks to clock lookup list serial: samsung: remove all uses of get_clksrc and set_clksrc ... Fix up fairly trivial conflicts in arch/arm/mach-s3c2440/clock.c and drivers/tty/serial/Kconfig both due to just adding code close to changes.
2012-01-08Merge branch 'pm-for-linus' of ↵Linus Torvalds1-19/+27
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits) PM / Hibernate: Implement compat_ioctl for /dev/snapshot PM / Freezer: fix return value of freezable_schedule_timeout_killable() PM / shmobile: Allow the A4R domain to be turned off at run time PM / input / touchscreen: Make st1232 use device PM QoS constraints PM / QoS: Introduce dev_pm_qos_add_ancestor_request() PM / shmobile: Remove the stay_on flag from SH7372's PM domains PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode PM: Drop generic_subsys_pm_ops PM / Sleep: Remove forward-only callbacks from AMBA bus type PM / Sleep: Remove forward-only callbacks from platform bus type PM: Run the driver callback directly if the subsystem one is not there PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412. PM / Sleep: Merge internal functions in generic_ops.c PM / Sleep: Simplify generic system suspend callbacks PM / Hibernate: Remove deprecated hibernation snapshot ioctls PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled() ARM: S3C64XX: Implement basic power domain support PM / shmobile: Use common always on power domain governor ... Fix up trivial conflict in fs/xfs/xfs_buf.c due to removal of unused XBT_FORCE_SLEEP bit
2012-01-07Merge branch 'depends/rmk/for-linus' into samsung/dtArnd Bergmann1-2/+2
Conflicts: arch/arm/mach-exynos/Makefile arch/arm/mach-exynos/cpu.c -> common.c arch/arm/mach-exynos/include/mach/entry-macro.S arch/arm/mach-exynos/init.c -> common.c arch/arm/mach-s5p64x0/init.c -> common.c arch/arm/mach-s5pv210/init.c -> common.c Multiple files were moved into common.c files in the rmk/for-linus branch, so this moves over the samsung/dt changes to the new files. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-01-06Merge branch 'amba-modalias' of ↵Linus Torvalds2-0/+4
git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'amba-modalias' of git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: sound: aaci: Enable module alias autogeneration for AMBA drivers watchdog: sp805: Enable module alias autogeneration for AMBA drivers fbdev: amba: Enable module alias autogeneration for AMBA drivers serial: pl011: Enable module alias autogeneration for AMBA drivers serial: pl010: Enable module alias autogeneration for AMBA drivers spi: pl022: Enable module alias autogeneration for AMBA drivers rtc: pl031: Enable module alias autogeneration for AMBA drivers rtc: pl030: Enable module alias autogeneration for AMBA drivers mmc: mmci: Enable module alias autogeneration for AMBA drivers input: ambakmi: Enable module alias autogeneration for AMBA drivers gpio: pl061: Enable module alias autogeneration for AMBA drivers dmaengine: pl330: Enable module alias autogeneration for AMBA drivers dmaengine: pl08x: Enable module alias autogeneration for AMBA drivers hwrng: nomadik: Enable module alias autogeneration for AMBA drivers ARM: amba: Auto-generate AMBA driver module aliases during modpost ARM: amba: Move definition of struct amba_id to mod_devicetable.h
2011-12-28dma: mxs-dma: convert to clk_prepare/clk_unprepareShawn Guo1-4/+4
The patch converts mxs-dma driver to clk_prepare/clk_unprepare by using helper functions clk_prepare_enable/clk_disable_unprepare. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-12-23DMA: PL330: Add device tree supportThomas Abraham1-4/+29
For PL330 dma controllers instantiated from device tree, the channel lookup is based on phandle of the dma controller and dma request id specified by the client node. During probe, the private data of each channel of the controller is set to point to the device node of the dma controller. The 'chan_id' of the each channel is used as the dma request id. Client driver requesting dma channels specify the phandle of the dma controller and the request id. The pl330 filter function converts the phandle to the device node pointer and matches that with channel's private data. If a match is found, the request id from the client node and the 'chan_id' of the channel is matched. A channel is found if both the values match. Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Boojin Kim <boojin.kim@samsung.com> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-23DMA: PL330: Infer transfer direction from transfer request instead of ↵Thomas Abraham1-49/+16
platform data The transfer direction for a channel can be inferred from the transfer request and the need for specifying transfer direction in platfrom data can be eliminated. So the structure definition 'struct dma_pl330_peri' is no longer required. The channel's private data is set to point to a channel id specified in the platform data (instead of an instance of type 'struct dma_pl330_peri'). The filter function is correspondingly modified to match the channel id. With the 'struct dma_pl330_peri' removed from platform data, the dma controller transfer capabilities cannot be inferred any more. Hence, the dma controller capabilities is specified using platform data. Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Boojin Kim <boojin.kim@samsung.com> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-23DMA: PL330: move filter function into driverThomas Abraham1-0/+15
The dma channel selection filter function is moved from plat-samsung into the pl330 driver. In additon to that, a check is added in the filter function to ensure that the channel on which the filter has been invoked is pl330 channel instance (and avoid any incorrect access of chan->private in a system with multiple types of DMA drivers). Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-19dma: MX3_IPU fix dependsEric Bénard1-2/+2
ARCH_MX3 was removed in commit a89cf59 : "arm/imx: merge i.MX3 and i.MX6" thus preventing to select MX3_IPU, thus preventing IPU and display to work on i.MX3x SOC. i.MX SDMA support is also affected. Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-13ARM: Orion: Get address map from plat-orion instead of via platform_dataAndrew Lunn1-5/+6
Use an getter function in plat-orion/addr-map.c to get the address map structure, rather than pass it to drivers in the platform_data structures. When the drivers are built for none orion platforms, a dummy function is provided instead which returns NULL. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Michael Walle <michael@walle.cc> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-11-23dmatest: don't use set_freezable_with_signal()Tejun Heo1-19/+27
Commit 981ed70d8e (dmatest: make dmatest threads freezable) made dmatest kthread use set_freezable_with_signal(); however, the interface is scheduled to be removed in the next merge window. The problem is that unlike userland tasks there's no default place which handles signal pending state and it isn't clear who owns and/or is responsible for clearing TIF_SIGPENDING. For example, in the current code, try_to_freeze() clears TIF_SIGPENDING but it isn't sure whether it actually owns the TIF_SIGPENDING nor is it race-free - ie. the task may continue to run with TIF_SIGPENDING set after the freezable section. Unfortunately, we don't have wait_for_completion_freezable_timeout(). This patch open codes it and uses wait_event_freezable_timeout() instead and removes timeout reloading - wait_event_freezable_timeout() won't return across freezing events (currently racy but fix scheduled) and timer doesn't decrement while the task is in freezer. Although this does lose timer-reset-over-freezing, given that timeout is supposed to be long enough and failure to finish inside is considered irrecoverable, I don't think this is worth the complexity. While at it, move completion to outer scope and explain that we're ignoring dangling pointer problem after timeout. This should give slightly better chance at avoiding oops after timeout. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-22dmaengine: pl330: Enable module alias autogeneration for AMBA driversDave Martin1-0/+2
Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Vinod Koul <vinod.koul@intel.com>
2011-11-22dmaengine: pl08x: Enable module alias autogeneration for AMBA driversDave Martin1-0/+2
Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com>
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds5-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-04Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds17-479/+864
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (63 commits) dmaengine: mid_dma: mask_peripheral_interrupt only when dmac is idle dmaengine/ep93xx_dma: add module.h include pch_dma: Reduce wasting memory pch_dma: Fix suspend issue dma/timberdale: free_irq() on an error path dma: shdma: transfer based runtime PM dmaengine: shdma: protect against the IRQ handler dmaengine i.MX DMA/SDMA: add missing include of linux/module.h dmaengine: delete redundant chan_id and chancnt initialization in dma drivers dmaengine/amba-pl08x: Check txd->llis_va before freeing dma_pool dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers serial: sh-sci: don't filter on DMA device, use only channel ID ARM: SAMSUNG: Remove Samsung specific enum type for dma direction ASoC: Samsung: Update DMA interface spi/s3c64xx: Merge dma control code spi/s3c64xx: Add support DMA engine API ARM: SAMSUNG: Remove S3C-PL330-DMA driver ARM: S5P64X0: Use generic DMA PL330 driver ARM: S5PC100: Use generic DMA PL330 driver ARM: S5PV210: Use generic DMA PL330 driver ... Fix up fairly trivial conflicts in - arch/arm/mach-exynos4/{Kconfig,clock.c} - arch/arm/mach-s5p64x0/dma.c
2011-11-03[media] dmaengine: ipu-idmac: add support for the DMA_PAUSE controlGuennadi Liakhovetski1-23/+42
To support multi-size buffers in the mx3_camera V4L2 driver we have to be able to stop DMA on a channel without releasing descriptors and completely halting the hardware. Use the DMA_PAUSE control to implement this mode. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-10-31drivers/dma: Add export.h to ste_dma40.cPaul Gortmaker1-0/+1
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31drivers/dma: Add module.h to files implicitly using it.Paul Gortmaker3-0/+3
Fix files that were implicitly using module.h but not calling it out for inclusion directly. We'll break those once we remove the implicit presence otherwise [With input from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31x86: fix up files really needing to include module.hPaul Gortmaker1-0/+1
These files aren't just exporting symbols -- they are also defining a MODULE_LICENSE etc. so give them the full module.h file. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-16dmaengine: mid_dma: mask_peripheral_interrupt only when dmac is idleVinod Koul1-4/+3
The mask_peripheral_interrupt is called when channel wants to mask the interrupt. Move this to suspend as this masking affects other channels as well. Not touching unmask here and unmask would still be done of first channel use Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-10-16dmaengine/ep93xx_dma: add module.h includeMika Westerberg1-0/+1
Due to module.h cleanup it is not anymore included implicitly. Drivers who want to use it need to include it explicitly. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-10-12pch_dma: Reduce wasting memoryTomoya MORINAGA1-2/+1
nr_channels is defined in "struct pch_dma". and struct pch_dma_chan is defined in "struct pch_dma". So, "sizeof(struct pch_dma_chan) * nr_channels" is unnecessary. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-10-11pch_dma: Fix suspend issueTomoya MORINAGA1-1/+1
Currently, executing suspend/hibernation, memory access violation occurs. In pch_dma_save_regs() called by suspend(), you can see the following code. static void pch_dma_save_regs(struct pch_dma *pd) { snip... list_for_each_entry_safe(chan, _c, &pd->dma.channels, device_node) { pd_chan = to_pd_chan(chan); pd->ch_regs[i].dev_addr = channel_readl(pd_chan, DEV_ADDR); pd->ch_regs[i].mem_addr = channel_readl(pd_chan, MEM_ADDR); pd->ch_regs[i].size = channel_readl(pd_chan, SIZE); pd->ch_regs[i].next = channel_readl(pd_chan, NEXT); i++; } } Max loop count is 12 defined at pci_table. So, this caused memory access violation. This patch fixes the issue - Modify array size (MAX_CHAN_NR) Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-10-07dma/timberdale: free_irq() on an error pathDan Carpenter1-1/+1
There was an error path that skipped the free_irq() step by mistake. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-28dma: shdma: transfer based runtime PMGuennadi Liakhovetski2-26/+75
Currently the shdma dmaengine driver uses runtime PM to save power, when no channel on the specific controller is requested by a user. This patch switches the driver to count individual DMA transfers. That way the controller can be powered down between transfers, even if some of its channels are in use. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-09-28dmaengine: shdma: protect against the IRQ handlerGuennadi Liakhovetski1-27/+28
The IRQ handler of the shdma driver accesses common hardware registers, that are also accessed from other contexts. Therefore access to them has to be performed with interrupts disabled, not only with disabled bottom halves. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-09-21Merge branch 'samsung_dma' into nextVinod Koul2-23/+209
2011-09-21dmaengine i.MX DMA/SDMA: add missing include of linux/module.hAxel Lin2-0/+2
Add missing include of linux/module.h to fix build error. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-20dmaengine: delete redundant chan_id and chancnt initialization in dma driversBarry Song7-15/+5
dma_async_device_register will re-init chan_id and chancnt, so whatever chan_id and chancnt are set in drivers, they will be re-written by dma_async_device_register. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Viresh Kumar <viresh.kumar@st.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Piotr Ziecik <kosmo@semihalf.com> Cc: Yong Wang <yong.y.wang@intel.com> Cc: Jaswinder Singh <jassi.brar@samsung.com> Cc: Pelagicore AB <info@pelagicore.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Acked-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-19dmaengine/amba-pl08x: Check txd->llis_va before freeing dma_poolViresh Kumar1-1/+2
In pl08x_free_txd(), check if pool is allocated successfully before freeing it. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-19dmaengine/amba-pl08x: Add support for sg len greater than one for slave ↵Viresh Kumar1-163/+215
transfers Untill now, sg_len greater than one is not supported. This patch adds support to do that. Note: Still, if peripheral is flow controller, sg_len can't be greater that one. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14DMA: PL330: Add DMA_CYCLIC capabilityBoojin Kim1-1/+83
This patch adds DMA_CYCLIC capability that is used for audio driver. DMA driver activated with it reuses the dma requests that were submitted through tx_submit(). Signed-off-by: Boojin Kim <boojin.kim@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14DMA: PL330: Remove the start operation for handling DMA_TERMINATE_ALL commandBoojin Kim1-4/+7
Original code carries out the start operation after flush operation. But start operation is not required for DMA_TERMINATE_ALL command. So, this patch removes the unnecessary start operation and only carries out the flush operation for handling DMA_TERMINATE_ALL command. Signed-off-by: Boojin Kim <boojin.kim@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> [Fixed typos in changelog] Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14DMA: PL330: Support DMA_SLAVE_CONFIG commandBoojin Kim1-12/+37
Signed-off-by: Boojin Kim <boojin.kim@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14DMA: PL330: Update PL330 DMA API driverBoojin Kim2-6/+11
This patch updates following 3 items. 1. Removes unneccessary code. 2. Add AMBA, PL330 configuration 3. Change the meaning of 'peri_id' variable from PL330 event number to specific dma id by user. Signed-off-by: Boojin Kim <boojin.kim@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14DMA: PL330: Add support runtime PM for PL330 DMACBoojin Kim1-2/+73
Signed-off-by: Boojin Kim <boojin.kim@samsung.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-13locking, dma, ipu: Annotate bank_lock as rawUwe Kleine-König1-24/+24
The bank_lock can be taken in atomic context (irq handling) and therefore cannot be preempted on -rt - annotate it. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: kernel@pengutronix.de Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Dan Williams <dan.j.williams@intel.com> Link: http://lkml.kernel.org/r/1311949627-13260-1-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-05dmaengine: amba-pl08x: make filter check that the channel is owned by pl08xRussell King - ARM Linux1-1/+9
Before converting the dma channel to our private data structure, first check that the channel is indeed one which our driver registered. We do this by ensuring that the underlying device is bound to our driver. This avoids potential oopses if we try to reference 'plchan->name' against a foreign drivers dma channel. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-05dmaengine/ste_dma40: fix memory leak due to prepared descriptorsPer Forlin1-0/+16
Prepared descriptors that are not submitted will not be freed. Add prepared descriptor to a list to be able to release them upon dmaengine_terminate_all(). Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-05dmaengine/ste_dma40: fix Oops due to double free of client descriptorPer Forlin1-10/+12
The client list may exist in two lists at the same time. This makes free fail since the same desc is freed multiple times. Remove desc from client list when adding it to the pending queue. Move free of client owned descriptors from free_dma() to terminate_all(). Unable to handle kernel paging request at virtual address 00100104 pgd = dea8c000 [00100104] *pgd=1ea62831, *pte=00000000, *ppte=00000000 Internal error: Oops: 817 [#1] PREEMPT SMP Modules linked in: CPU: 0 Not tainted (3.1.0-rc3+ #58) PC is at d40_free_chan_resources+0x64/0x330 Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-05dmaengine/ste_dma40: remove duplicate call to d40_pool_lli_free().Per Forlin1-3/+0
d40_desc_free() already calls d40_pool_lli_free(). Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-05dmaengine/ste_dma40: add missing kernel doc for pending_queuePer Forlin1-0/+1
Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-05dmaengine/ste_dma40: fix memory leak due to prepared descriptorsPer Forlin1-0/+16
Prepared descriptors that are not submitted will not be freed. Add prepared descriptor to a list to be able to release them upon dmaengine_terminate_all(). Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-05dmaengine/ste_dma40: fix Oops due to double free of client descriptorPer Forlin1-10/+12
The client list may exist in two lists at the same time. This makes free fail since the same desc is freed multiple times. Remove desc from client list when adding it to the pending queue. Move free of client owned descriptors from free_dma() to terminate_all(). Unable to handle kernel paging request at virtual address 00100104 pgd = dea8c000 [00100104] *pgd=1ea62831, *pte=00000000, *ppte=00000000 Internal error: Oops: 817 [#1] PREEMPT SMP Modules linked in: CPU: 0 Not tainted (3.1.0-rc3+ #58) PC is at d40_free_chan_resources+0x64/0x330 Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-05dmaengine/ste_dma40: remove duplicate call to d40_pool_lli_free().Per Forlin1-3/+0
d40_desc_free() already calls d40_pool_lli_free(). Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-05dmaengine/ste_dma40: add missing kernel doc for pending_queuePer Forlin1-0/+1
Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-02Merge branch 'next' into v3.1-rc4Vinod Koul6-323/+420
Fixed trivial conflicts in drivers/dma/amba-pl08x.c Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-08-29dmaengine i.MX SDMA: use request_firmware_nowaitSascha Hauer1-7/+16
The firmware blob may not be available when the driver probes. Instead of blocking the whole kernel use request_firmware_nowait() and continue without firmware. The ROM scripts can already be used then if available. For the devicetree case the ROM scripts are not available, still the probe function should not block. The driver will be unusable in this case, but we have no way of detecting this properly. The configuration of the dma channels will fail, so nothing bad should happen. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 17:29:14 +0000