summaryrefslogtreecommitdiffstats
path: root/drivers/dma
AgeCommit message (Collapse)AuthorFilesLines
2010-10-29drivers/dma/Kconfig: add part number for Topcliff.Valdis.Kletnieks@vt.edu1-2/+2
Product codenames are OK, but once an actual product name is available, it should be referenced as well. http://ark.intel.com/chipset.aspx?familyID=52499 Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27Merge branch 'next' of ↵Linus Torvalds14-899/+5276
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (48 commits) DMAENGINE: move COH901318 to arch_initcall dma: imx-dma: fix signedness bug dma/timberdale: simplify conditional ste_dma40: remove channel_type ste_dma40: remove enum for endianess ste_dma40: remove TIM_FOR_LINK option ste_dma40: move mode_opt to separate config ste_dma40: move channel mode to a separate field ste_dma40: move priority to separate field ste_dma40: add variable to indicate valid dma_cfg async_tx: make async_tx channel switching opt-in move async raid6 test to lib/Kconfig.debug dmaengine: Add Freescale i.MX1/21/27 DMA driver intel_mid_dma: change the slave interface intel_mid_dma: fix the WARN_ONs intel_mid_dma: Add sg list support to DMA driver intel_mid_dma: Allow DMAC2 to share interrupt intel_mid_dma: Allow IRQ sharing intel_mid_dma: Add runtime PM support DMAENGINE: define a dummy filter function for ste_dma40 ...
2010-10-27NULL-terminate all pci_device_id tablesDzianis Kahanovich1-0/+1
NULL-terminating pci_device_id in pch_dma.c and scx200_acb.c for appying MODULE_DEVICE_TABLE (to publish modalias-es). Signed-off-by: Dzianis Kahanovich <mahatma@eu.by> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-10-22DMAENGINE: move COH901318 to arch_initcallLinus Walleij1-1/+1
After moving the PL022 driver to subsys_initcall() due to the need of having stuff like regulators on the other end of the SPI link, I noticed that the COH901318 DMA engine will get probed before the DMA engine, so move it to an arch_initcall(). Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-22dma: imx-dma: fix signedness bugSascha Hauer1-1/+3
mxdmac->channel was unsigned, so check (imxdmac->channel < 0) for failed imx_dma_request_by_prio() made no sence. Explicitly check signed values. Also, fix uninitialzed use of ret. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-22Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds1-0/+1
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default vfs: don't use BKL in default_llseek llseek: automatically add .llseek fop libfs: use generic_file_llseek for simple_attr mac80211: disallow seeks in minstrel debug code lirc: make chardev nonseekable viotape: use noop_llseek raw: use explicit llseek file operations ibmasmfs: use generic_file_llseek spufs: use llseek in all file operations arm/omap: use generic_file_llseek in iommu_debug lkdtm: use generic_file_llseek in debugfs net/wireless: use generic_file_llseek in debugfs drm: use noop_llseek
2010-10-19Merge branch 'dma40' into dmaengineDan Williams3-21/+50
2010-10-19dma/timberdale: simplify conditionalNicolas Kaiser1-1/+1
Simplify: ((a && b) || (!a && !b)) => (a == b) Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Acked-by: Jack Stone <jwjstone@fastmail.fm> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-19ste_dma40: remove enum for endianessRabin Vincent2-4/+6
A bool will suffice. The default is little endian. Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-19ste_dma40: move mode_opt to separate configRabin Vincent2-2/+33
Defaults are "basic mode" for physical channels, and "logical source logical destination" for logical channels. Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-19ste_dma40: move channel mode to a separate fieldRabin Vincent1-6/+2
And keep it logical by default. Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-19ste_dma40: move priority to separate fieldRabin Vincent1-1/+1
And keep it low priority by default. Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-19ste_dma40: add variable to indicate valid dma_cfgRabin Vincent1-8/+8
Since we want to reduce the amount of required channel configuration and remove channel_type, don't depend on it to indicate whether the configuration is valid. Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-15llseek: automatically add .llseek fopArnd Bergmann1-0/+1
All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-10-13ioat2: fix performance regressionDan Williams1-1/+1
Commit 0793448 "DMAENGINE: generic channel status v2" changed the interface for how dma channel progress is retrieved. It inadvertently exported an internal helper function ioat_tx_status() instead of ioat_dma_tx_status(). The latter polls the hardware to get the latest completion state, while the helper just evaluates the current state without touching hardware. The effect is that we end up waiting for completion timeouts or descriptor allocation errors before the completion state is updated. iperf (before fix): [SUM] 0.0-41.3 sec 364 MBytes 73.9 Mbits/sec iperf (after fix): [SUM] 0.0- 4.5 sec 499 MBytes 940 Mbits/sec This is a regression starting with 2.6.35. Cc: <stable@kernel.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Maciej Sosnowski <maciej.sosnowski@intel.com> Reported-by: Richard Scobie <richard@sauce.co.nz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07async_tx: make async_tx channel switching opt-inDan Williams2-4/+7
The majority of drivers in drivers/dma/ will never establish cross channel operation chains and do not need the extra overhead in struct dma_async_tx_descriptor. Make channel switching opt-in by default. Cc: Anatolij Gustschin <agust@denx.de> Cc: Ira Snyder <iws@ovro.caltech.edu> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Saeed Bishara <saeed@marvell.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07Merge branches 'dma40', 'pl08x', 'fsldma', 'imx' and 'intel-mid' into dmaengineDan Williams12-266/+4625
2010-10-07dmaengine: Add Freescale i.MX1/21/27 DMA driverSascha Hauer3-0/+431
This driver is currently implemented as a user to the old i.MX DMA API. This allows us to convert each user of the old API to the dmaengine API one by one. Once this is done the old DMA driver can be merged into the i.MX dmaengine driver. V2: remove some debug leftovers and unused variables Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07intel_mid_dma: change the slave interfaceKoul, Vinod2-25/+52
In 2.6.36 kernel, dma slave control command was introduced, this patch changes the intel-mid-dma driver to this new kernel slave interface Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07intel_mid_dma: fix the WARN_ONsKoul, Vinod1-3/+3
Moved the WARN_ON to BUG_ON, as WARN_ON if hit, can cause null pointer derefrences Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07intel_mid_dma: Add sg list support to DMA driverRamesh Babu K V2-50/+247
For a very high speed DMA various periphral devices need scatter-gather list support. The DMA hardware support link list items. This list can be circular also (adding new flag DMA_PREP_CIRCULAR_LIST) Right now this flag is in driver header and should be moved to dmaengine header file eventually Signed-off-by: Ramesh Babu K V <ramesh.b.k.v@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07intel_mid_dma: Allow DMAC2 to share interruptYong Wang1-4/+1
Allow DMAC2 to share interrupt since exclusive interrupt line for mrst DMAC2 is not provided on other platforms. Signed-off-by: Yong Wang <yong.y.wang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07intel_mid_dma: Allow IRQ sharingYong Wang1-11/+14
intel_mid_dma driver allows interrupt sharing. Thus it needs to check whether IRQ source is the DMA controller and return the appropriate IRQ return. Signed-off-by: Yong Wang <yong.y.wang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07intel_mid_dma: Add runtime PM supportKoul, Vinod2-8/+129
This patch adds runtime PM support in this dma driver for 4 PCI Controllers Whenever the driver is idle (no channels grabbed), it can go to low power state It also adds the PCI suspend and resume support Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07DMAENGINE: Remove stedma40_set_psize and pre_transfer hook in ste_dma40Per Forlin1-51/+1
Remove obsolete pre_transfer hook in stedma40_chan_cfg. The intent of this hook is merely to handle burst size compensation for ux500 variant MMCI. Remove obsolete stedma40_set_psize since it is only called from pre_transfer. DMAEngine device_control replaces the functionality of stedma40_set_psize. Signed-off-by: Per Forlin <per.forlin@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07DMAENGINE: Set burst size for phy and log chans in ste_dma40 dev_controlPer Forlin1-8/+26
Set burst for physical or logical channels respectively. Convert the values in dma_cfg to dma reg bits for physical or logical channels. Signed-off-by: Per Forlin <per.forlin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07DMAENGINE: ste_dma40: fix resource leaks in error paths.Rabin Vincent1-4/+13
Fix some leaks of allocated descriptors in error paths. Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07DMAENGINE: ste_dma40: fix desc_getRabin Vincent1-9/+14
Fix desc_get to alloc a descriptor from the cache if the ones in the list are waiting for the ack. Also, memzero the descriptor when allocated from the list to ensure all fields are cleared. Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07DMAENGINE: ste_dma40: fix clk_get failure pathRabin Vincent1-1/+1
clk_get returns an ERR_PTR. Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07DMAENGINE: ste_dma40: fix disabled channels listRabin Vincent1-3/+5
The value in the array, not the index, specifies the channel to be disabled. Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07ste_dma40: implement support for scatterlist to scatterlist copyIra Snyder1-0/+17
Now that the DMAEngine API has support for scatterlist to scatterlist copy, implement support for the STE DMA40 DMA controller. Cc: Linus Walleij <linus.ml.walleij@gmail.com> Acked-by: Per Fridén <per.friden@stericsson.com> Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07fsldma: improved DMA_SLAVE supportIra Snyder1-182/+44
Now that the generic DMAEngine API has support for scatterlist to scatterlist copying, the device_prep_slave_sg() portion of the DMA_SLAVE API is no longer necessary and has been removed. However, the device_control() portion of the DMA_SLAVE API is still useful to control device specific parameters, such as externally controlled DMA transfers and maximum burst length. A special dma_ctrl_cmd has been added to enable externally controlled DMA transfers. This is currently specific to the Freescale DMA controller, but can easily be made generic when another user is found. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07fsldma: implement support for scatterlist to scatterlist copyIra Snyder1-3/+125
Now that the DMAEngine API has support for scatterlist to scatterlist copy, implement support for the Freescale DMA controller. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07dma: add support for scatterlist to scatterlist copyIra Snyder1-0/+2
This adds support for scatterlist to scatterlist DMA transfers. A similar interface is exposed by the fsldma driver (through the DMA_SLAVE API) and by the ste_dma40 driver (through an exported function). This patch paves the way for making this type of copy operation a part of the generic DMAEngine API. Futher patches will add support in individual drivers. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-05dmaengine: Add Freescale i.MX SDMA supportSascha Hauer3-0/+1401
This patch adds support for the Freescale i.MX SDMA engine. The SDMA engine is a scatter/gather DMA engine which is implemented as a seperate coprocessor. SDMA needs its own firmware which is requested using the standard request_firmware mechanism. The firmware has different entry points for each peripheral type, so drivers have to pass the peripheral type to the DMA engine which in turn picks the correct firmware entry point from a table contained in the firmware image itself. The original Freescale code also supports support for transfering data to the internal SRAM which needs different entry points to the firmware. Support for this is currently not implemented. Also, support for the ASRC (asymmetric sample rate converter) is skipped. I took a very simple approach to implement dmaengine support. Only a single descriptor is statically assigned to a each channel. This means that transfers can't be queued up but only a single transfer is in progress. This simplifies implementation a lot and is sufficient for the usual device/memory transfers. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Linus Walleij <linus.ml.walleij@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-05dmaengine: add possibility for cyclic transfersSascha Hauer1-0/+2
Cyclic transfers are useful for audio where a single buffer divided in periods has to be transfered endlessly until stopped. After being prepared the transfer is started using the dma_async_descriptor->tx_submit function. dma_async_descriptor->callback is called after each period. The transfer is stopped using the DMA_TERMINATE_ALL callback. While being used for cyclic transfers the channel cannot be used for other transfer types. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-29dmaengine: driver for the ARM PL080/PL081 PrimeCells v5Linus Walleij3-0/+2176
This creates a DMAengine driver for the ARM PL080/PL081 PrimeCells based on the implementation earlier submitted by Peter Pearse. This is working like a charm for memcpy and slave DMA to the PL011 PrimeCell on the PB11MPCore. This DMA controller is used in mostly unmodified form in the ARM RealView and Versatile platforms, in the ST-Ericsson Nomadik, and in the ST SPEAr platform. It has been converted to use the header from the Samsung PL080 derivate instead of its own defintions. The Samsungs have a custom driver in their mach-* folders though, atleast we can share the register definitions. Cc: Peter Pearse <peter.pearse@arm.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> [GFP_KERNEL to GFP_NOWAIT in pl08x_prep_dma_memcpy] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-23dmaengine: fix interrupt clearing for mv_xorSimon Guinot1-1/+1
When using simultaneously the two DMA channels on a same engine, some transfers are never completed. For example, an endless lock can occur while writing heavily on a RAID5 array (with async-tx offload support enabled). Note that this issue can also be reproduced by using the DMA test client. On a same engine, the interrupt cause register is shared between two DMA channels. This patch make sure that the cause bit is only cleared for the requested channel. Signed-off-by: Simon Guinot <sguinot@lacie.com> Tested-by: Luc Saillard <luc@saillard.org> Acked-by: saeed bishara <saeed.bishara@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22dma/shdma: move dereference below the NULL checkDan Carpenter1-1/+2
"param" can be NULL here, so only dereference it after the check. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22DMAENGINE: ste_dma40: don't pause/resume non-executing channelsJonas Aaberg1-0/+6
There is no point in pausing what isn't running. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22DMAENGINE: ste_dma40: rewrote LCLA entries allocation codeJonas Aaberg3-309/+218
LLI allocation is now done on job level instead of channel level. Previously the maximum length of a linked job in hw on a logical channel was 8, since the LLIs where evenly divided. Now only executing jobs have allocated LLIs which increase the length to a maximum of 64 links in HW. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22DMAENGINE: ste_dma40: fix possible use of uninitialized variableJonas Aaberg1-2/+2
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22DMAENGINE: ste_dma40: corrected is_paused behaviorJonas Aaberg1-4/+10
The handling of pause detection was slightly incorrect. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22DMAENGINE: ste_dma40: code clean-upJonas Aaberg3-60/+50
This patch includes non functional code clean up changes, file header updates and a few magic numbers got defined. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22DMAENGINE: ste_dma40: added support for link jobs in hwJonas Aaberg2-116/+202
If a new job is added on a physical channel that already has a job, the new job is linked in hw to the old job instead of queueing up the jobs. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22DMAENGINE: ste_dma40: removed a few magic numbersJonas Aaberg2-6/+15
Make sure to extract the revision field explicitly and document what bits are being accessed here without magic numbers. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22DMAENGINE: ste_dma40: fix bug related to callback handlingJonas Aaberg3-23/+14
The callback got called even when it was not supposed to. Also removed some not needed interrupt trigger on/off code. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22DMAENGINE: ste_dma40: Code clean-up and removed an unneeded suspend requestJonas Aaberg1-30/+16
This patch cleans up some code and removes a suspend request that was pointless since the hw was never configured nor running when it was called. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22DMAENGINE: ste_dma40: No need reading, masking and setting a set registerJonas Aaberg1-4/+1
Removes an unnecessary register read and a few lines of code. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22DMAENGINE: ste_dma40: Fix failed to restart logical channel bugJonas Aaberg1-12/+8
A transfer that runs in the different direction on the same channel will now be resumed when the other is suspend/stopped. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>